ALCATEL-IND1-SYSTEM-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, IpAddress, Integer32, Unsigned32, Counter64, NOTIFICATION-TYPE FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF TEXTUAL-CONVENTION, TruthValue, RowStatus FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB Ipv6Address FROM IPV6-TC hardentIND1System FROM ALCATEL-IND1-BASE InetAddressType, InetAddress FROM INET-ADDRESS-MIB VirtualOperChassisId, virtualChassisOperChasId FROM ALCATEL-IND1-VIRTUAL-CHASSIS-MIB; alcatelIND1SystemMIB MODULE-IDENTITY LAST-UPDATED "200709040000Z" ORGANIZATION "Alcatel-Lucent" CONTACT-INFO "Please consult with Customer Service to ensure the most appropriate version of this document is used with the products in question: Alcatel-Lucent, Enterprise Solutions Division (Formerly Alcatel Internetworking, Incorporated) 26801 West Agoura Road Telephone: North America +1 800 995 2696 Latin America +1 877 919 9526 Europe +31 23 556 0100 Asia +65 394 7933 All Other +1 818 878 4507 Electronic Mail: support@ind.alcatel.com World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" DESCRIPTION "This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line Proprietary System Subsystem. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE" REVISION "201101230000Z" DESCRIPTION "The latest version of this MIB Module." ::= {hardentIND1System 1 } alcatelIND1SystemMIBObjects OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For BOP Proprietary System Subsystem Managed Objects." ::= { alcatelIND1SystemMIB 1 } alcatelIND1SystemMIBConformance OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Alcatel IND BOP Proprietary System Subsystem Conformance Information." ::= { alcatelIND1SystemMIB 2 } alcatelIND1SystemMIBTrapObjects OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Alcatel IND BOP Proprietary System Subsystem Trap Objects." ::= { alcatelIND1SystemMIB 3 } alcatelIND1SystemMIBTraps OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Alcatel IND BOP Proprietary System Subsystem Trap Information." ::= { alcatelIND1SystemMIB 4 } alcatelIND1SystemMIBGroups OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Alcatel IND BOP Proprietary System Subsystem Units Of Conformance." ::= { alcatelIND1SystemMIBConformance 1 } alcatelIND1SystemMIBCompliances OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Alcatel IND BOP Proprietary System Subsystem Compliance Statements." ::= { alcatelIND1SystemMIBConformance 2 } -- textual conventions SystemFileType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "a small positive integer used to identify file types" SYNTAX INTEGER { file(1), directory(2), undefined(3), tarArchive(4) } SwitchLoggingIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "a small positive integer used to identify switch logging outputs" SYNTAX INTEGER { console(1), flash(2), socket(3), ipaddr(4) } AppIdIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "a small positive integer used to index into tables arranged by Application ID's." SYNTAX Integer32 (0..254) -- 255 possible application id's Enable ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "an enumerated value used to indicate whether an entity is enabled(1), or disabled(2)" SYNTAX INTEGER { enabled(1), disabled(2) } FileSystemIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "an enumerated value which provides an indication of the file system. The value is a small positive integer indicating the type of the file system" SYNTAX INTEGER { flash(1), -- /flash uflash(2) -- /uflash (USB Flash drive) } SeverityLevel ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "an enumerated value which provides an indication of the severity level used for logging and debug purposes. The value is a small integer." SYNTAX INTEGER { severityLevelOff (0), -- logging turned off severityLevelAlarm(1), -- about to crash and reboot severityLevelError(2), -- functionality is reduced severityLevelAlert(3), -- a violation has occurred severityLevelWarn (4), -- unexpected, non critical event severityLevelInfo (5), -- any other msg that is not a dbg msg severityLevelDbg1 (6), -- normal event debug message severityLevelDbg2 (7), -- debug specific message severityLevelDbg3 (8) -- maximum verbosity dbg specific msg } SysLogFacilityId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "" SYNTAX INTEGER { uucp(0), user(1), system(2), syslog(3), secAuth2(4), secAuth1(5), ntp(6), netNews(7), mail(8), lptr(9), logAudit(10), logAlert(11), local7(12), local6(13), local5(14), local4(15), local3(16), local2(17), local1(18), local0(19), kernel(20), ftp(21), clock2(22), clock1(23) } CommandPercentComplete ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An indication of percent complete for a command." SYNTAX Integer32 (0..100) VrfId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Switch Log Vrf ID" SYNTAX Integer32 (1..64) AgeLimit ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Time Limit for switch log hash table entries" SYNTAX Integer32 (1..64) -- groups within the system mib systemMicrocode OBJECT IDENTIFIER ::= {alcatelIND1SystemMIBObjects 1 } systemBootParams OBJECT IDENTIFIER ::= {alcatelIND1SystemMIBObjects 2 } systemHardware OBJECT IDENTIFIER ::= {alcatelIND1SystemMIBObjects 3 } systemFileSystem OBJECT IDENTIFIER ::= {alcatelIND1SystemMIBObjects 4 } systemServices OBJECT IDENTIFIER ::= {alcatelIND1SystemMIBObjects 5 } systemSwitchLogging OBJECT IDENTIFIER ::= {alcatelIND1SystemMIBObjects 6 } systemDNS OBJECT IDENTIFIER ::= {alcatelIND1SystemMIBObjects 7 } systemBlueToothServices OBJECT IDENTIFIER ::= {alcatelIND1SystemMIBObjects 8 } systemFips OBJECT IDENTIFIER ::= {alcatelIND1SystemMIBObjects 9 } systemVcHardware OBJECT IDENTIFIER ::= {alcatelIND1SystemMIBObjects 10 } -- systemMicrocode group. This group contains the CMM specific -- microcode information. systemMicrocodePackageTable OBJECT-TYPE SYNTAX SEQUENCE OF SystemMicrocodePackageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "the microcode package table" ::= {systemMicrocode 1} systemMicrocodePackageEntry OBJECT-TYPE SYNTAX SystemMicrocodePackageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "a row in the microcode package table" INDEX {systemMicrocodePackageDirectoryIndex, systemMicrocodePackageDirectory, systemMicrocodePackageIndex} ::= {systemMicrocodePackageTable 1} SystemMicrocodePackageEntry ::= SEQUENCE { systemMicrocodePackageDirectoryIndex Unsigned32, systemMicrocodePackageDirectory SnmpAdminString, systemMicrocodePackageIndex Unsigned32, systemMicrocodePackageVersion SnmpAdminString, systemMicrocodePackageName SnmpAdminString, systemMicrocodePackageDescription SnmpAdminString, systemMicrocodePackageStatus INTEGER, systemMicrocodePackageSize Unsigned32 } systemMicrocodePackageDirectoryIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The package index for directories. Values 1-4 are pre-defined as: loaded(1), certified(2), working(3), issu(4). Values 5+ are user working directories in /flash assigned by the system. Values 5+ remain associated with a directory until reboot, takeover, the directory no longer contains valid images or the directory no longer exists." ::= {systemMicrocodePackageEntry 1} systemMicrocodePackageDirectory OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..108)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The directory name under flash where the microcode package is found. Directories with names longer than 108 characters will be skipped." ::= {systemMicrocodePackageEntry 2} systemMicrocodePackageIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index to the package sub table in the microcode table" ::= {systemMicrocodePackageEntry 3} systemMicrocodePackageVersion OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The version of the microcode package (Fos.img, Fbase.img, etc.)" ::= {systemMicrocodePackageEntry 4} systemMicrocodePackageName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the microcode package" DEFVAL { "" } ::= {systemMicrocodePackageEntry 5} systemMicrocodePackageDescription OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The description of the microcode package" DEFVAL { "" } ::= {systemMicrocodePackageEntry 6} systemMicrocodePackageStatus OBJECT-TYPE SYNTAX INTEGER { undefined(1), ok(2), inuse(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the microcode package" DEFVAL { undefined } ::= {systemMicrocodePackageEntry 7} systemMicrocodePackageSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the microcode package" DEFVAL { 0 } ::= {systemMicrocodePackageEntry 8} systemMicrocodeLoadedTable OBJECT-TYPE SYNTAX SEQUENCE OF SystemMicrocodeLoadedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "the microcode package table" ::= {systemMicrocode 2} systemMicrocodeLoadedEntry OBJECT-TYPE SYNTAX SystemMicrocodeLoadedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "a row in the microcode package table" INDEX {systemMicrocodeLoadedIndex} ::= {systemMicrocodeLoadedTable 1} SystemMicrocodeLoadedEntry ::= SEQUENCE { systemMicrocodeLoadedIndex Unsigned32, systemMicrocodeLoadedDirectory SnmpAdminString, systemMicrocodeLoadedVersion SnmpAdminString, systemMicrocodeLoadedName SnmpAdminString, systemMicrocodeLoadedDescription SnmpAdminString, systemMicrocodeLoadedSize Unsigned32 } systemMicrocodeLoadedIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index to the loaded package in microcode table" ::= {systemMicrocodeLoadedEntry 1} systemMicrocodeLoadedDirectory OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..108)) MAX-ACCESS read-only STATUS current DESCRIPTION "The directory name under flash where the microcode package is found. Directories with names longer than 108 characters will be skipped." ::= {systemMicrocodeLoadedEntry 2} systemMicrocodeLoadedVersion OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The version of the microcode package (Fos.img, Fbase.img, etc.)" ::= {systemMicrocodeLoadedEntry 3} systemMicrocodeLoadedName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the microcode package" DEFVAL { "" } ::= {systemMicrocodeLoadedEntry 4} systemMicrocodeLoadedDescription OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The description of the microcode package" DEFVAL { "" } ::= {systemMicrocodeLoadedEntry 5} systemMicrocodeLoadedSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the microcode package" DEFVAL { 0 } ::= {systemMicrocodeLoadedEntry 6} -- systemBootParams group. This group contains the CMM specific -- boot parameter information. systemBootNetwork OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "this object is the base IP address of the EMP for this CMM" ::= { systemBootParams 1 } systemBootNetworkGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "this object is the gateway of the EMP for this CMM" ::= { systemBootParams 2 } systemBootNetworkNetmask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This is the Netmask of the EMP that is used when this CMM boots." ::={ systemBootParams 3 } -- systemHardware group. This group contains hardware information -- regarding this CMM. systemHardwareFlashMfg OBJECT-TYPE SYNTAX INTEGER {other(1), amd(2), intel(3), atmel(4), micron(5), kingston(6), toshiba(7), sandisk(8), sst(9), spansion(10), wintec(13)} MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the manufacturer of the Flash memory used on this product. toshiba(7) is for hawk only. The reason 7 is used is because 5 is already used for micron and 6 is for kingston. toshiba, sandisk, and sst are compact flashes for the hawk only." ::= { systemHardware 1} systemHardwareFlashSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the size of the flash memory available on this CMM. It is the total flash hardware memory and does not indicate how much of the memory is free, used, etc." ::= { systemHardware 2} systemHardwareMemoryMfg OBJECT-TYPE SYNTAX INTEGER {other(1), amd(2), intel(3), atmel(4), micron(5), kingston(6), toshiba(7), agilent(8), dataram(10), interward(11), notreadable(12)} MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the manufacturer of the RAM memory used on this CMM." ::= { systemHardware 3} systemHardwareMemorySize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the size of the RAM memory available on this CMM. It is the total RAM hardware memory and does not indicate how much of the memory is free, used, etc." ::= { systemHardware 4} systemHardwareNVRAMBatteryLow OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the whether the NVRAM battery is low. true(1), false(2)" ::= { systemHardware 5} systemHardwareBootCpuType OBJECT-TYPE SYNTAX INTEGER {other(1), sparc380(2), sparcV9(3), ppc(4), ppc8540(5), ppc8572(6), arm(7)} MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the manufacturer and model number of the CPU. Currently, only two types of processors are enumerated." ::={ systemHardware 6 } systemHardwareJumperInterruptBoot OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies whether the Interrupt Boot Jumper on this CMM is set: True(1), False(2)" DEFVAL {false} ::= {systemHardware 7} systemHardwareJumperForceUartDefaults OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies whether the Force Uart Defaults Jumper on this CMM is set: True(1), False(2)" DEFVAL {false} ::= {systemHardware 8} systemHardwareJumperRunExtendedMemoryDiagnostics OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies whether the Run Extended Memory Diagnostics Jumper on this CMM is set: True(1), False(2)" DEFVAL {false} ::= {systemHardware 9} systemHardwareJumperSpare OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies whether the Spare Jumper on this CMM is set: True(1), False(2)" DEFVAL {false} ::= {systemHardware 10} systemHardwareFpgaVersionTable OBJECT-TYPE SYNTAX SEQUENCE OF SystemHardwareFpgaVersionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the FPGA version for each FPGA on this CMM" ::= {systemHardware 11} systemHardwareFpgaVersionEntry OBJECT-TYPE SYNTAX SystemHardwareFpgaVersionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "a row in the systemHardwareFpgaVersionTable" INDEX {systemHardwareFpgaVersionIndex} ::= {systemHardwareFpgaVersionTable 1} SystemHardwareFpgaVersionEntry ::= SEQUENCE { systemHardwareFpgaVersionIndex Integer32, systemHardwareFpgaVersion Unsigned32 } systemHardwareFpgaVersionIndex OBJECT-TYPE SYNTAX Integer32 (1..3) MAX-ACCESS read-only STATUS current DESCRIPTION "This is the index to one of the FPGA versions on this CMM" ::={systemHardwareFpgaVersionEntry 1} systemHardwareFpgaVersion OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the major version of one of the FPGA devices on this CMM. refer to the systemHardwareMinorFpgaVersion for the minor number." ::={systemHardwareFpgaVersionEntry 2} systemHardwareBootRomVersion OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A string that identifies the boot rom version" DEFVAL { "" } ::={ systemHardware 12 } systemHardwareBackupMiniBootVersion OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A string that identifies the backup miniboot version." DEFVAL { "" } ::={ systemHardware 13 } systemHardwareDefaultMiniBootVersion OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A string that identifies the default miniboot version." DEFVAL { "" } ::={ systemHardware 14 } systemHardwareMinorFpgaVersion OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A string that identifies the minor FPGA version. Refer to the systemHardwareFpgaVersion for the major FPGA version number." DEFVAL { "" } ::={ systemHardware 15 } systemHardwareCpldVersion OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A string that identifies the CPLD version." DEFVAL { "" } ::={ systemHardware 16 } systemHardwareUbootVersion OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A string that identifies the Uboot version." DEFVAL { "" } ::={ systemHardware 17 } systemHardwareProdRegId OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A string that identifies the product ID register" DEFVAL { "" } ::={ systemHardware 18 } systemHardwareRevisionRegister OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A string that identifies the hardware revision register" DEFVAL { "" } ::={ systemHardware 19 } systemHardwareXfpId OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A string that identifies the XFP ID" DEFVAL { "" } ::={ systemHardware 20 } systemHardwareUbootMinibootVersion OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A string that identifies the Uboot-miniboot version." DEFVAL { "" } ::={ systemHardware 21 } -- systemServices group. This group contains the objects used by the -- System Services applications. systemServicesDate OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object contains the current System Date in the following format: MM/DD/YYYY" ::= { systemServices 1 } systemServicesTime OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object contains the current System Time in the following format: HH:MM:SS" ::= { systemServices 2 } systemServicesTimezone OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object contains the current Hour Offset from UTC in the following format: -13:00 to +12:00 OR a well known timezone (PST,CST,etc.)" ::= { systemServices 3 } systemServicesTimezoneStartWeek OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "first, second, third, fourth, fifth, last = 1,2,3,4,5,6" DEFVAL { 0 } ::= { systemServices 4 } systemServicesTimezoneStartDay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Sunday, Monday, Tues... = 1,2,3,4,5,6,7" DEFVAL { 0 } ::= { systemServices 5 } systemServicesTimezoneStartMonth OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "January, February, march... = 1,2,3,4,5,67,8,9,10,11,12" DEFVAL { 0 } ::= { systemServices 6 } systemServicesTimezoneStartTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "2:00, 3:00, 4:00... = 200, 300, 400, etc." DEFVAL { 0 } ::= { systemServices 7 } systemServicesTimezoneOffset OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "60 minutes = 60" DEFVAL { 0 } ::= { systemServices 8 } systemServicesTimezoneEndWeek OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "first, second, third, fourth, fifth, last = 1,2,3,4,5,6" DEFVAL { 0 } ::= { systemServices 9 } systemServicesTimezoneEndDay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Sunday, Monday, Tues... = 1,2,3,4,5,6,7" DEFVAL { 0 } ::= { systemServices 10 } systemServicesTimezoneEndMonth OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "January, February, march... = 1,2,3,4,5,6,7,8,9,10,11,12" DEFVAL { 0 } ::= { systemServices 11 } systemServicesTimezoneEndTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "2:00, 3:00, 4:00... = 200, 300, 400, etc." DEFVAL { 0 } ::= { systemServices 12 } systemServicesEnableDST OBJECT-TYPE SYNTAX Enable MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables and disables the DST." DEFVAL { disabled } ::= { systemServices 13 } systemServicesWorkingDirectory OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object contains the current file system working directory for this CMM. For example, /flash/certified" DEFVAL {"/flash"} ::= { systemServices 14 } systemServicesArg1 OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "the 1st argument for system services action routines" DEFVAL {""} ::= { systemServices 15 } systemServicesArg2 OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "the 2nd argument for system services action routines" DEFVAL {""} ::= { systemServices 16 } systemServicesArg3 OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "the 3rd argument for system services action routines" DEFVAL {""} ::= { systemServices 17 } systemServicesArg4 OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "the 4th argument for system services action routines" DEFVAL {""} ::= { systemServices 18 } systemServicesArg5 OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "the 5th argument for system services action routines" DEFVAL {""} ::= { systemServices 19 } systemServicesArg6 OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "the 6th argument for system services action routines" DEFVAL {""} ::= { systemServices 20 } systemServicesArg7 OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "the 7th argument for system services action routines" DEFVAL {""} ::= { systemServices 21 } systemServicesArg8 OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "the 8th argument for system services action routines" DEFVAL {""} ::= { systemServices 22 } systemServicesArg9 OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "the 9th argument for system services action routines" DEFVAL {""} ::= { systemServices 23 } systemServicesAction OBJECT-TYPE SYNTAX INTEGER{ noaction(0), mkdir(1), rmdir(2), mv(3), rm(4), rmr(5), cp(6), cpr(7), chmodpw(8), chmodmw(9), fsck(10), ftp(11), rz(12), vi(13), telnet(14), install(15), ed(16), more(17), newfs(18), dshell(19), view(20), modbootparams(21), filedir(22), ssh(23), sftp(24), debugPmdNi(25), bootrom(26), defaultminiboot(27), backupminiboot(28), fpgacmm(29), ubootcmm(30), ubootni(31), scp(32), aclman(33), ubootMinibootAllSlots(34), miniboot(35), upgradeLicence(36), restoreLicence(37), updateDSineXtroller(38), ftp6(39), telnet6(40), ssh6(41), sftp6(42), mount(43), unmount(44), backup(45), restore(46), tftp(47), fscollect(48), fpgani(49) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies which of the above Actions is to be performed by the System Services Application. Most Actions require one or more parameters be set before the Action is executed. systemServicesAction - 26 for bootrom, 27 for default miniboot, and 28 for backup miniboot use systemServicesArg1 for name of the file scp- the first 2 arguments are going to be used. Set arg 1 with the source and the arg 2 with the destination file(s). E.g. scp LocalDir/testfileX.txt admin@10.255.11.1:RemoteDir/testfileX.txt For mount and umount, systemServicesArg1 specifies the mount point (such as /uflash). For newfs, systemServicesArg1 contains the name of the file-system (/uflash or /flash) which will be created. On /uflash, a FAT16 file system is created with long name naming conventions. For fsck, systemServicesArg1 contains the name of the file-system (/uflash or /flash) which will be checked and systemServicesArg2 will contain the string repair or no-repair depending on if autocorrection is requested. To see all file systems currently mounted, refer to the systemFileSystemTable. For backup and restore, systemServicesArg1 contains the archive name and systemServicesArg2 through Arg9 contains the directories and/or files to be archived/extracted. For newfs, fsck, backup and restore, the systemServicesActionPercentComplete variable can be inspected to see a progress indication." ::= { systemServices 24 } systemServicesResultCode OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "the result of a system services application" ::= { systemServices 25 } systemServicesResultString OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "the string result of a system services application" ::= { systemServices 26 } systemServicesKtraceEnable OBJECT-TYPE SYNTAX Enable MAX-ACCESS read-write STATUS obsolete DESCRIPTION "enables/disables the Ktrace facility" DEFVAL { enabled } ::= { systemServices 27 } systemServicesSystraceEnable OBJECT-TYPE SYNTAX Enable MAX-ACCESS read-write STATUS obsolete DESCRIPTION "enables/disables the Systrace facility" DEFVAL { enabled } ::= { systemServices 28 } systemServicesTtyLines OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "the number of tty lines for a console screen" DEFVAL { 24 } ::= { systemServices 29 } systemServicesTtyColumns OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "the number of tty columns for a console screen" DEFVAL { 80 } ::= { systemServices 30 } systemServicesMemMonitorEnable OBJECT-TYPE SYNTAX Enable MAX-ACCESS read-write STATUS current DESCRIPTION "disables/enables the kernel Memory Monitor feature" DEFVAL { enabled } ::= { systemServices 31 } systemServicesKtraceLevelTable OBJECT-TYPE SYNTAX SEQUENCE OF SystemServicesKtraceLevelEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "the table of Ktrace severity level settings" ::= { systemServices 32} systemServicesKtraceLevelEntry OBJECT-TYPE SYNTAX SystemServicesKtraceLevelEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "A row in the system services ktrace level table. There is one entry for each possible Application ID" INDEX {systemServicesKtraceLevelAppId} ::= {systemServicesKtraceLevelTable 1} SystemServicesKtraceLevelEntry ::= SEQUENCE { systemServicesKtraceLevelAppId AppIdIndex, systemServicesKtraceLevel SeverityLevel } systemServicesKtraceLevelAppId OBJECT-TYPE SYNTAX AppIdIndex MAX-ACCESS read-only STATUS obsolete DESCRIPTION "the index into the ktrace level table" ::= {systemServicesKtraceLevelEntry 1 } systemServicesKtraceLevel OBJECT-TYPE SYNTAX SeverityLevel MAX-ACCESS read-write STATUS obsolete DESCRIPTION "the ktrace level for a specific Application ID" DEFVAL { severityLevelDbg3 } ::= {systemServicesKtraceLevelEntry 2 } systemServicesSystraceLevelTable OBJECT-TYPE SYNTAX SEQUENCE OF SystemServicesSystraceLevelEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "the table of Systrace severity level settings" ::= { systemServices 33} systemServicesSystraceLevelEntry OBJECT-TYPE SYNTAX SystemServicesSystraceLevelEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "A row in the system services systrace level table. There is one entry for each possible Application ID" INDEX {systemServicesSystraceLevelAppId} ::= {systemServicesSystraceLevelTable 1} SystemServicesSystraceLevelEntry ::= SEQUENCE { systemServicesSystraceLevelAppId AppIdIndex, systemServicesSystraceLevel SeverityLevel } systemServicesSystraceLevelAppId OBJECT-TYPE SYNTAX AppIdIndex MAX-ACCESS read-only STATUS obsolete DESCRIPTION "the Systrace level for a specific Application ID." ::= {systemServicesSystraceLevelEntry 1 } systemServicesSystraceLevel OBJECT-TYPE SYNTAX SeverityLevel MAX-ACCESS read-write STATUS obsolete DESCRIPTION "the Systrace level for a specific Application ID." DEFVAL { severityLevelDbg3 } ::= {systemServicesSystraceLevelEntry 2 } systemUpdateStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF SystemUpdateStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Provides update status for firmware updates" ::= {systemServices 34} systemUpdateStatusEntry OBJECT-TYPE SYNTAX SystemUpdateStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the update status table." INDEX { systemUpdateIndex} ::= {systemUpdateStatusTable 1} SystemUpdateStatusEntry ::= SEQUENCE { systemUpdateIndex Integer32, systemUpdateStatus INTEGER, systemUpdateErrorCode INTEGER } systemUpdateIndex OBJECT-TYPE SYNTAX Integer32(1..72) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index to the CMM for which status is required." ::= {systemUpdateStatusEntry 1} systemUpdateStatus OBJECT-TYPE SYNTAX INTEGER { inProgress(1), doneOk(2), doneNok(3), noOp(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of a firmware update. In the case of doneNok, further information can be obtained from systemUpdateErrorCode." ::= {systemUpdateStatusEntry 2} systemUpdateErrorCode OBJECT-TYPE SYNTAX INTEGER { msgSendIpcErr(1), fXferOPenErr(2), fXferFtpErr(3), fXferReadErr(4), fXferWriteErr(5), fXferReplyErr(6), fXferQuitErr(7), fXferFcloseErr(8), fileNameErr(9), rmFileErr(10), noInstallComp(11), notSysResource(12), notSupported(13), invalidValue(14), waitMsgMaxTry(15), installDrvErr(16), fileNotFound(17), notPrimary(18), commandBlocked(19), noError(20), invalidNi(21), niNotPresent(22), dupSerialNum(23), upToDate(24), invalidModType(25), maxFaiCount(26), invalidKey(27), niLocked(28) } MAX-ACCESS read-only STATUS current DESCRIPTION "Error codes for done_nok." ::= {systemUpdateStatusEntry 3} systemServicesActionPercentComplete OBJECT-TYPE SYNTAX CommandPercentComplete MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the percent completion of the currently executing systemServicesAction." ::= { systemServices 35 } systemServicesCurrentArchivePathName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the archive currently being read via the systemServicesArchiveTable. This object is the complete pathname to the archive and must be set prior to reading the systemServicesArchiveTable." ::= { systemServices 36 } systemServicesArchiveTable OBJECT-TYPE SYNTAX SEQUENCE OF SystemServicesArchiveEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the contents of a backup archive. This table is used by the restore action command to display (rather than backup) an archive. The restore command will populate this table with archive information read from the archive specified by the systemServicesAction restore command. This is done as follows. Set the systemServicesArg1 object to the archive name to be read. Set the systemServicesArg2 object to the string: display-only. Set the systemServicesAction object to restore. Then read this table." ::= { systemServices 37} systemServicesArchiveEntry OBJECT-TYPE SYNTAX SystemServicesArchiveEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the system services archive table." INDEX { systemServicesArchiveIndex } ::= { systemServicesArchiveTable 1 } SystemServicesArchiveEntry ::= SEQUENCE { systemServicesArchiveIndex Unsigned32, systemServicesArchiveName SnmpAdminString, systemServicesArchiveType SystemFileType, systemServicesArchiveSize Unsigned32, systemServicesArchiveAttr INTEGER } systemServicesArchiveIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Index to a specific entry in the backup archive file." ::= {systemServicesArchiveEntry 1} systemServicesArchiveName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of a file in the backup archive file." DEFVAL { "" } ::= { systemServicesArchiveEntry 2 } systemServicesArchiveType OBJECT-TYPE SYNTAX SystemFileType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of a file in the backup archive file." DEFVAL { undefined } ::= { systemServicesArchiveEntry 3 } systemServicesArchiveSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The size of a file in the backup archive file." DEFVAL { 0 } ::= { systemServicesArchiveEntry 4 } systemServicesArchiveAttr OBJECT-TYPE SYNTAX INTEGER { undefined(1), readOnly(2), readWrite(3), writeOnly(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The attributes of a file in the backup archive file." DEFVAL { undefined } ::= { systemServicesArchiveEntry 5 } systemServicesUsbEnable OBJECT-TYPE SYNTAX INTEGER { enableasync(1), disable(2), enablesync(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "disable/enable the USB interface with mode as synchronous / asynchronous" DEFVAL { disable } ::= { systemServices 38} systemServicesUsbAutoCopyEnable OBJECT-TYPE SYNTAX Enable MAX-ACCESS read-write STATUS current DESCRIPTION "disable/enable the USB auto-copy facility" ::= { systemServices 39} systemServicesUsbMounted OBJECT-TYPE SYNTAX Enable MAX-ACCESS read-only STATUS current DESCRIPTION "determinse if usb is mounted" ::= { systemServices 40} --systemFileSystem group. This group contains the parameters for --the multiple File Systems on the platform. systemFileSystemTable OBJECT-TYPE SYNTAX SEQUENCE OF SystemFileSystemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "system file system table for this CMM." ::= { systemFileSystem 1} systemFileSystemEntry OBJECT-TYPE SYNTAX SystemFileSystemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the system file system table" INDEX {systemFileSystemIndex} ::= {systemFileSystemTable 1} SystemFileSystemEntry ::= SEQUENCE { systemFileSystemIndex FileSystemIndex, systemFileSystemName SnmpAdminString, systemFileSystemFreeSpace Unsigned32 } systemFileSystemIndex OBJECT-TYPE SYNTAX FileSystemIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Index to a specific file system." ::= {systemFileSystemEntry 1} systemFileSystemName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the file system." DEFVAL { "" } ::= { systemFileSystemEntry 2 } systemFileSystemFreeSpace OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "the free space in octets of this file system" DEFVAL { 0 } ::= { systemFileSystemEntry 3 } systemFileSystemDirectoryName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of a file system directory. This object is used in conjunction with an Action command. The Action command will set this directory name to the name of a specific directory. Information for all of the files in that directory will then be read from the file system and the appropriate values written in the entries in the systemFileSystemFile table. All this is being done to give snmp access to the file system files." DEFVAL { "" } ::= { systemFileSystem 2 } systemFileSystemDirectoryDateTime OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "the date and time (in system format) of the last access to this directory" DEFVAL { "" } ::= { systemFileSystem 3 } systemFileSystemFileTable OBJECT-TYPE SYNTAX SEQUENCE OF SystemFileSystemFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "system file system File table for this CMM. This table is used by an Action command which will populate it with file information read from the files in the specified directory." ::= { systemFileSystem 4} systemFileSystemFileEntry OBJECT-TYPE SYNTAX SystemFileSystemFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the system file system File table" INDEX { systemFileSystemFileIndex} -- base table index ::= {systemFileSystemFileTable 1} SystemFileSystemFileEntry ::= SEQUENCE { systemFileSystemFileIndex Unsigned32, systemFileSystemFileName SnmpAdminString, systemFileSystemFileType SystemFileType, systemFileSystemFileSize Unsigned32, systemFileSystemFileAttr INTEGER, systemFileSystemFileDateTime SnmpAdminString } systemFileSystemFileIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Index to a specific file system File." ::= {systemFileSystemFileEntry 1} systemFileSystemFileName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of a file system File" DEFVAL { "" } ::= { systemFileSystemFileEntry 2 } systemFileSystemFileType OBJECT-TYPE SYNTAX SystemFileType MAX-ACCESS read-only STATUS current DESCRIPTION "The Type of a file system File" DEFVAL { undefined } ::= { systemFileSystemFileEntry 3 } systemFileSystemFileSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "size of this file" DEFVAL { 0 } ::= { systemFileSystemFileEntry 4 } systemFileSystemFileAttr OBJECT-TYPE SYNTAX INTEGER { undefined(1), readOnly(2), readWrite(3), writeOnly(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "attributes of this file" DEFVAL { undefined } ::= { systemFileSystemFileEntry 5 } systemFileSystemFileDateTime OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "the modification date and time of a file" DEFVAL { "" } ::= { systemFileSystemFileEntry 6 } --systemSwitchLogging group. This group contains the Switch Logging --configuration data. systemSwitchLoggingIndex OBJECT-TYPE SYNTAX SwitchLoggingIndex MAX-ACCESS read-only STATUS current DESCRIPTION "A small positive integer used to identify a switch logging output" DEFVAL { flash } ::={ systemSwitchLogging 1 } systemSwitchLoggingEnable OBJECT-TYPE SYNTAX Enable MAX-ACCESS read-write STATUS current DESCRIPTION "Global switch logging enable/disable" DEFVAL { enabled } ::={ systemSwitchLogging 2 } systemSwitchLoggingFlash OBJECT-TYPE SYNTAX Enable MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable switch logging to flash" DEFVAL { enabled } ::={ systemSwitchLogging 3 } systemSwitchLoggingSocket OBJECT-TYPE SYNTAX Enable MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable switch logging to a socket" DEFVAL { disabled } ::={ systemSwitchLogging 4 } systemSwitchLoggingSocketIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The IP Address of a remote host that can be used to send switch logging records to as an option" ::={ systemSwitchLogging 5 } systemSwitchLoggingConsole OBJECT-TYPE SYNTAX Enable MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable switch logging to the console" DEFVAL { disabled } ::={ systemSwitchLogging 6 } systemSwitchLoggingApplicationTable OBJECT-TYPE SYNTAX SEQUENCE OF SystemSwitchLoggingLevelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of switch logging registered applications,one for each Application ID" ::={ systemSwitchLogging 7} systemSwitchLoggingLevelEntry OBJECT-TYPE SYNTAX SystemSwitchLoggingLevelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the system switch logging application table" INDEX { systemSwitchLoggingApplicationAppId, systemSwitchLoggingApplicationSubAppId, systemSwitchLoggingApplicationSubAppVrfLevelIndex } ::={ systemSwitchLoggingApplicationTable 1 } SystemSwitchLoggingLevelEntry ::= SEQUENCE { systemSwitchLoggingApplicationAppId AppIdIndex, systemSwitchLoggingApplicationSubAppId AppIdIndex, systemSwitchLoggingApplicationSubAppVrfLevelIndex Integer32, systemSwitchLoggingApplicationAppName SnmpAdminString, systemSwitchLoggingApplicationSubAppName SnmpAdminString, systemSwitchLoggingApplicationSubAppLevel SeverityLevel, systemSwitchLoggingApplicationSubAppVrfLevelString SnmpAdminString } systemSwitchLoggingApplicationAppId OBJECT-TYPE SYNTAX AppIdIndex MAX-ACCESS read-only STATUS current DESCRIPTION "A specific application ID which has a registered application associated with it. This application ID is used as an index into the application table." ::={ systemSwitchLoggingLevelEntry 1 } systemSwitchLoggingApplicationSubAppId OBJECT-TYPE SYNTAX AppIdIndex MAX-ACCESS read-only STATUS current DESCRIPTION "A specific sub-application ID which belongs to a registered application associated with it. This sub-application ID is used as part of the index into the application table." ::={ systemSwitchLoggingLevelEntry 2 } systemSwitchLoggingApplicationSubAppVrfLevelIndex OBJECT-TYPE SYNTAX Integer32 (0..8) MAX-ACCESS read-only STATUS current DESCRIPTION "The specific sub-application's VRF severity level. This severity level is used as part of the index into the application table." ::={ systemSwitchLoggingLevelEntry 3 } systemSwitchLoggingApplicationAppName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Application name in an entry in the table" DEFVAL { "" } ::={ systemSwitchLoggingLevelEntry 4 } systemSwitchLoggingApplicationSubAppName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the specific sub-application ID." DEFVAL { "" } ::={ systemSwitchLoggingLevelEntry 5 } systemSwitchLoggingApplicationSubAppLevel OBJECT-TYPE SYNTAX SeverityLevel MAX-ACCESS read-only STATUS current DESCRIPTION "The severity level of the specific sub-application ID." DEFVAL { severityLevelOff } ::={ systemSwitchLoggingLevelEntry 6 } systemSwitchLoggingApplicationSubAppVrfLevelString OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A string with comma-delimited VRF IDs or ranges of VRF IDs that belong to this sub-application's VRF severity level." DEFVAL { "" } ::={ systemSwitchLoggingLevelEntry 7 } systemSwitchLoggingClear OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Enable clearing of switch logging entries" ::={ systemSwitchLogging 8 } systemSwitchLoggingFileSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Set size of swlog logging file" ::={ systemSwitchLogging 9 } systemSwitchLoggingHostTable OBJECT-TYPE SYNTAX SEQUENCE OF SystemSwitchLoggingHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of switch logging remote hosts." ::={ systemSwitchLogging 10} systemSwitchLoggingHostEntry OBJECT-TYPE SYNTAX SystemSwitchLoggingHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A remote switch logging server entry." INDEX { systemSwitchLoggingHostIpAddr } ::={ systemSwitchLoggingHostTable 1 } SystemSwitchLoggingHostEntry ::= SEQUENCE { systemSwitchLoggingHostIpAddr IpAddress, systemSwitchLoggingHostPort Integer32, systemSwitchLoggingHostStatus RowStatus, systemSwitchLoggingHostUserCommandHost Enable, systemSwitchLoggingHostVrfName SnmpAdminString } systemSwitchLoggingHostIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of a remote host that can be used to send switch logging records to." ::={ systemSwitchLoggingHostEntry 1 } systemSwitchLoggingHostPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The port number of a remote host that can be used to send switch logging records to." DEFVAL { 514 } ::={ systemSwitchLoggingHostEntry 2 } systemSwitchLoggingHostStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Provides the ability to add or remove a remote host entry." ::={ systemSwitchLoggingHostEntry 3 } systemSwitchLoggingHostUserCommandHost OBJECT-TYPE SYNTAX Enable MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates whether this host may receive user command data." DEFVAL { disabled } ::={ systemSwitchLoggingHostEntry 4 } systemSwitchLoggingHostVrfName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The name or number of the VRF to be used to send switch logging records to." DEFVAL { "" } ::={ systemSwitchLoggingHostEntry 5 } systemSwitchLoggingHostv6Table OBJECT-TYPE SYNTAX SEQUENCE OF SystemSwitchLoggingHostv6Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of switch logging remote hosts." ::={ systemSwitchLogging 11 } systemSwitchLoggingHostv6Entry OBJECT-TYPE SYNTAX SystemSwitchLoggingHostv6Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A remote switch logging server entry." INDEX { systemSwitchLoggingHostv6IpAddr } ::={ systemSwitchLoggingHostv6Table 1 } SystemSwitchLoggingHostv6Entry ::= SEQUENCE { systemSwitchLoggingHostv6IpAddr Ipv6Address, systemSwitchLoggingHostv6Port Integer32, systemSwitchLoggingHostv6Status RowStatus, systemSwitchLoggingHostv6UserCommandHost Enable, systemSwitchLoggingHostv6VrfName SnmpAdminString } systemSwitchLoggingHostv6IpAddr OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of a remote host that can be used to send switch logging records to." ::={ systemSwitchLoggingHostv6Entry 1 } systemSwitchLoggingHostv6Port OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The port number of a remote host that can be used to send switch logging records to." DEFVAL { 514 } ::={ systemSwitchLoggingHostv6Entry 2 } systemSwitchLoggingHostv6Status OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Provides the ability to add or remove a remote host entry." ::={ systemSwitchLoggingHostv6Entry 3 } systemSwitchLoggingHostv6UserCommandHost OBJECT-TYPE SYNTAX Enable MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates whether this host may receive user command data." DEFVAL { disabled } ::={ systemSwitchLoggingHostv6Entry 4 } systemSwitchLoggingHostv6VrfName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The name or number of the VRF to be used to send switch logging records to." DEFVAL { "" } ::={ systemSwitchLoggingHostv6Entry 5 } systemSwitchLoggingHostCount OBJECT-TYPE SYNTAX Integer32 (0..4) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of remote hosts currently defined." ::={ systemSwitchLogging 12} systemSwitchLoggingConsoleLevel OBJECT-TYPE SYNTAX SeverityLevel MAX-ACCESS read-create STATUS current DESCRIPTION "Messages whose severity level is equal to or more severe than this value will be displayed to the console." DEFVAL { severityLevelWarn } ::={ systemSwitchLogging 13} systemSwitchLoggingUserCommandStatus OBJECT-TYPE SYNTAX Enable MAX-ACCESS read-create STATUS current DESCRIPTION "User commands will be logged to remote hosts when enabled." DEFVAL { disabled } ::={ systemSwitchLogging 14} systemSwitchLoggingSysLogFacilityId OBJECT-TYPE SYNTAX SysLogFacilityId MAX-ACCESS read-write STATUS current DESCRIPTION "This textual convention enumerates the facilities that originate syslog messages. The Facilities of syslog messages are numerically coded with decimal values. Some of the operating system daemons and processes are traditionally designated by the Facility values given below. Daemons and processes that do not have an explicitly assigned Facility may use any of the 'local use' Facilities or they may use the 'user-level' Facility. For interoperability and backwards compatibility reasons, mapping specified in this document between a label which represents a Facility and the value which represents the corresponding code, is normative. So the mapping from a label configured by operators in syslog.conf or equivalent will consistently map to the same Facility code regardless of implementation, but the label itself is often semantically meaningless, because it is impractical to attempt to enumerate all possible facilities, and the enumeration (label and corresponding value) that is used by an actual Facility is, and has historically been, implementation-dependent. For example, the foobar application might log messages as having come from local7, even though there is no 'local' process on the device, and the operator can configure syslog.conf to have local7.critical messages be relayed, even though there might be multiple facilities using Facility local7. This is typical current practice, and originators, relays and collectors know how to handle this situation. For improved accuracy, the foobar application can also include an APPNAME Structured Data Element." DEFVAL { uucp } ::={ systemSwitchLogging 15} systemSwitchLoggingLevel OBJECT-TYPE SYNTAX SeverityLevel MAX-ACCESS read-write STATUS current DESCRIPTION "The logging level for a specific application id." ::={ systemSwitchLogging 16 } systemSwitchLoggingAppName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Application name used as an index into the table" DEFVAL { "" } ::={ systemSwitchLogging 17 } systemSwitchLoggingDuplicateDetect OBJECT-TYPE SYNTAX Enable MAX-ACCESS read-write STATUS current DESCRIPTION "Global switch logging enable/disable duplicate detection" DEFVAL { enabled } ::={ systemSwitchLogging 18 } systemSwitchLoggingPreamble OBJECT-TYPE SYNTAX Enable MAX-ACCESS read-write STATUS current DESCRIPTION "Global switch logging enable/disable printing preamble" DEFVAL { enabled } ::={ systemSwitchLogging 19 } systemSwitchLoggingDebug OBJECT-TYPE SYNTAX Enable MAX-ACCESS read-write STATUS current DESCRIPTION "Global switch logging enable/disable debug information" DEFVAL { enabled } ::={ systemSwitchLogging 20 } systemSwitchLoggingVrf OBJECT-TYPE SYNTAX VrfId MAX-ACCESS read-write STATUS current DESCRIPTION "Global switch logging subapplicastion VRF ID" DEFVAL { 1 } ::={ systemSwitchLogging 21 } systemSwitchLoggingHashAgeLimit OBJECT-TYPE SYNTAX AgeLimit MAX-ACCESS read-write STATUS current DESCRIPTION "Global switch logging Hash Table Age Limit" DEFVAL { 1 } ::={ systemSwitchLogging 22 } systemSwitchLoggingTty OBJECT-TYPE SYNTAX Enable MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable switch logging to tty" DEFVAL { disabled } ::={ systemSwitchLogging 23 } systemSwitchLoggingSubAppNbr OBJECT-TYPE SYNTAX AppIdIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The subapplication number of a given application" ::={ systemSwitchLogging 24 } systemSwitchLoggingLibraryName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Library name used as an index into the table of registered libraries" DEFVAL { "" } ::={ systemSwitchLogging 25 } systemSwitchLoggingLoopback0 OBJECT-TYPE SYNTAX Enable MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable switch logging using Loopback0 interface as the source ip address when logging to syslog server" DEFVAL { disabled } ::={ systemSwitchLogging 26 } systemSwitchLoggingDgHostTable OBJECT-TYPE SYNTAX SEQUENCE OF SystemSwitchLoggingDgHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of switch logging remote hosts for Dying Gasp." ::={ systemSwitchLogging 27 } systemSwitchLoggingDgHostEntry OBJECT-TYPE SYNTAX SystemSwitchLoggingDgHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A remote switch logging server entry." INDEX { systemSwitchLoggingDgHostIndex } ::={ systemSwitchLoggingDgHostTable 1 } SystemSwitchLoggingDgHostEntry ::= SEQUENCE { systemSwitchLoggingDgHostIndex Integer32, systemSwitchLoggingDgHostIpType InetAddressType, systemSwitchLoggingDgHostIpAddr InetAddress } systemSwitchLoggingDgHostIndex OBJECT-TYPE SYNTAX Integer32 (1..3) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of Dying Gasp swlod table." DEFVAL { 1 } ::={ systemSwitchLoggingDgHostEntry 1 } systemSwitchLoggingDgHostIpType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address type ." ::= { systemSwitchLoggingDgHostEntry 2 } systemSwitchLoggingDgHostIpAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of a remote host that can be used to send Dying Gasp switch logging records to." ::={ systemSwitchLoggingDgHostEntry 3 } --systemDNS group. This group contains the Domain Name Service --configuration information. systemDNSEnableDnsResolver OBJECT-TYPE SYNTAX Enable MAX-ACCESS read-create STATUS current DESCRIPTION "Global Domain Name Service enable/disable" DEFVAL { disabled } ::={ systemDNS 1 } systemDNSDomainName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "current domain name used by the Domain Name Service" DEFVAL { "" } ::={ systemDNS 2 } systemDNSNsAddr1 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "1st part of address used by the Domain Name Service" DEFVAL { '00000000'H } -- 0.0.0.0 or :: ::={ systemDNS 3 } systemDNSNsAddr2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "2nd part of address used by the Domain Name Service" DEFVAL { '00000000'H } -- 0.0.0.0 or :: ::={ systemDNS 4 } systemDNSNsAddr3 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "3rd part of address used by the Domain Name Service" DEFVAL { '00000000'H } -- 0.0.0.0 or :: ::={ systemDNS 5 } systemDNSNsIPv6Addr1 OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-create STATUS current DESCRIPTION "IPv6 address of the Primary DNS server" DEFVAL { '00000000000000000000000000000000'H } -- 0.0.0.0 or :: ::={ systemDNS 6 } systemDNSNsIPv6Addr2 OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-create STATUS current DESCRIPTION "IPv6 address of the Secondary DNS server" DEFVAL { '00000000000000000000000000000000'H } -- 0.0.0.0 or :: ::={ systemDNS 7 } systemDNSNsIPv6Addr3 OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-create STATUS current DESCRIPTION "IPv6 address of the third DNS server" DEFVAL { '00000000000000000000000000000000'H } -- 0.0.0.0 or :: ::={ systemDNS 8 } -- systemBlueTooth group. This group contains the objects used by the -- System BlueTooth Services. systemServicesBluetoothEnable OBJECT-TYPE SYNTAX Enable MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable Bluetooth." DEFVAL { enabled } ::= { systemBlueToothServices 1} systemServicesBluetoothTxPower OBJECT-TYPE SYNTAX INTEGER { low(1), high(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Bluetooth transmit power, low or high." DEFVAL { low } ::= { systemBlueToothServices 2} systemServicesBluetoothTable OBJECT-TYPE SYNTAX SEQUENCE OF SystemServicesBluetoothEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of Bluetooth devices." ::={ systemBlueToothServices 3 } systemServicesBluetoothEntry OBJECT-TYPE SYNTAX SystemServicesBluetoothEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Bluetooth device entry." INDEX { systemServicesBluetoothChassisId } ::={ systemServicesBluetoothTable 1 } SystemServicesBluetoothEntry ::= SEQUENCE { systemServicesBluetoothChassisId VirtualOperChassisId, systemServicesBluetoothStatus INTEGER } systemServicesBluetoothChassisId OBJECT-TYPE SYNTAX VirtualOperChassisId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The chassis ID for this Bluetooth instance." ::= { systemServicesBluetoothEntry 1 } systemServicesBluetoothStatus OBJECT-TYPE SYNTAX INTEGER { notPresent(1), connectionInactive(2), connectionActive(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current Bluetooth status." ::= { systemServicesBluetoothEntry 2 } --systemFips group. This group contains the FIPS 140-2 --configuration information. systemFipsAdminState OBJECT-TYPE SYNTAX Enable MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the FIPS mode on AOS switches. This value becomes the systemFipsOperState after write-memory and reboot." DEFVAL { disabled } ::= { systemFips 1 } systemFipsOperState OBJECT-TYPE SYNTAX Enable MAX-ACCESS read-only STATUS current DESCRIPTION "The Operational State of the FIPS mode on AOS switches" ::= { systemFips 2 } systemVcHardwareTable OBJECT-TYPE SYNTAX SEQUENCE OF SystemVcHardwareEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table lists the results of cable diagnostics." ::= { systemVcHardware 1 } systemVcHardwareEntry OBJECT-TYPE SYNTAX SystemVcHardwareEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponding to each port." INDEX { virtualChassisOperChasId } ::= { systemVcHardwareTable 1 } SystemVcHardwareEntry ::= SEQUENCE { systemVcHardwareCpuVendor SnmpAdminString, systemVcHardwareCpuModel SnmpAdminString, systemVcHardwareFlashMfg INTEGER, systemVcHardwareFlashSize Counter64, systemVcHardwareMemoryMfg INTEGER, systemVcHardwareMemorySize Counter64, systemVcHardwareUbootVersion SnmpAdminString, systemVcHardwareFpga1Version SnmpAdminString, systemVcHardwareFpga2Version SnmpAdminString, systemVcHardwarePowerSuppliesPresent BITS, systemVcHardwareNisPresent BITS, systemVcHardwareCFMsPresent BITS, systemVcHardwareFanTraysPresent BITS } systemVcHardwareCpuVendor OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A string that identifies the CPU Vendor for this chassis in the VC." DEFVAL { "" } ::={ systemVcHardwareEntry 1 } systemVcHardwareCpuModel OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A string that identifies the CPU Model for this chassis in the VC." DEFVAL { "" } ::={ systemVcHardwareEntry 2 } systemVcHardwareFlashMfg OBJECT-TYPE SYNTAX INTEGER {other(1), amd(2), intel(3), atmel(4), micron(5), kingston(6), toshiba(7), sandisk(8), sst(9), spansion(10), wintec(13)} MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the manufacturer of the Flash memory used on this chassis in the VC." ::= { systemVcHardwareEntry 3} systemVcHardwareFlashSize OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the size of the flash memory available on this chassis in the VC." ::= { systemVcHardwareEntry 4} systemVcHardwareMemoryMfg OBJECT-TYPE SYNTAX INTEGER {other(1), amd(2), intel(3), atmel(4), micron(5), kingston(6), toshiba(7), agilent(8), dataram(10), interward(11), notreadable(12)} MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the manufacturer of the RAM memory used on this chassis in the VC" ::= { systemVcHardwareEntry 5} systemVcHardwareMemorySize OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the size of the RAM memory available on this chassis in the VC" ::= { systemVcHardwareEntry 6} systemVcHardwareUbootVersion OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A string that identifies the Uboot version for this chassis in the VC." DEFVAL { "" } ::={ systemVcHardwareEntry 7 } systemVcHardwareFpga1Version OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This is the version of one of the FPGA #1 this CMM in the VC." DEFVAL { "" } ::= { systemVcHardwareEntry 8 } systemVcHardwareFpga2Version OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This is the version of one of the FPGA #2 this CMM in the VC. If this FPGA does not exist then this will be N/A" DEFVAL { "" } ::= { systemVcHardwareEntry 9 } systemVcHardwarePowerSuppliesPresent OBJECT-TYPE SYNTAX BITS { ps1(0), ps2(1), ps3(2), ps4(3), ps5(4), ps6(5), ps7(6), ps8(7), ps9(8), ps10(9), ps11(10), ps12(11), ps13(12), ps14(13), ps15(14), ps16(15) } MAX-ACCESS read-only STATUS current DESCRIPTION "A List of the Power supplies that are Present" DEFVAL { {} } ::= { systemVcHardwareEntry 10 } systemVcHardwareNisPresent OBJECT-TYPE SYNTAX BITS { ni1(0), ni2(1), ni3(2), ni4(3), ni5(4), ni6(5), ni7(6), ni8(7), ni9(8), ni10(9), ni11(10), ni12(11), ni13(12), ni14(13), ni15(14), ni16(15) } MAX-ACCESS read-only STATUS current DESCRIPTION "A List of the NI's/Expansion modules Present" DEFVAL { {} } ::= { systemVcHardwareEntry 11 } systemVcHardwareCFMsPresent OBJECT-TYPE SYNTAX BITS { cfm1(0), cfm2(1), cfm3(2), cfm4(3), cfm5(4), cfm6(5), cfm7(6), cfm8(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "A List of the CFM's that are Present" DEFVAL { {} } ::= { systemVcHardwareEntry 12 } systemVcHardwareFanTraysPresent OBJECT-TYPE SYNTAX BITS { fanTray1(0), fanTray2(1), fanTray3(2), fanTray4(3), fanTray5(4), fanTray6(5), fanTray7(6), fanTray8(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "A List of the Fan Trays Present" DEFVAL { {} } ::= { systemVcHardwareEntry 13 } -- -- Trap Objects -- systemSwlogName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "SWLOG file name that might get overwritten since swlog file reached (90%) it size" DEFVAL { "" } ::= { alcatelIND1SystemMIBTrapObjects 1 } -- -- NOTIFICATIONS -- systemSwlogSizeTrap NOTIFICATION-TYPE OBJECTS { systemSwlogName } STATUS current DESCRIPTION "The file specified file may get lost if not backed up , since swlog file reached 90% of its size , please back up swlog before getting overwritten." ::= { alcatelIND1SystemMIBTraps 0 1 } -- -- Compliance Statements -- alcatelIND1SystemMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for Alcatel BOP Proprietary System Subsystem." MODULE -- this module MANDATORY-GROUPS { systemMicrocodeGroup, systemBootParamsGroup, systemHardwareGroup, systemServicesGroup, systemFileSystemGroup, systemSwitchLoggingGroup, systemDNSGroup, systemBlueToothServicesGroup, systemFipsGroup, systemVcHardwareGroup, systemNotificationGroup } ::= { alcatelIND1SystemMIBCompliances 1 } -- -- Units Of Conformance -- systemMicrocodeGroup OBJECT-GROUP OBJECTS { systemMicrocodePackageVersion, systemMicrocodePackageName, systemMicrocodePackageDescription, systemMicrocodePackageStatus, systemMicrocodePackageSize, systemMicrocodeLoadedDirectory, systemMicrocodeLoadedVersion, systemMicrocodeLoadedName, systemMicrocodeLoadedDescription, systemMicrocodeLoadedSize } STATUS current DESCRIPTION "Group all the system microcode objects together" ::= { alcatelIND1SystemMIBGroups 1 } systemBootParamsGroup OBJECT-GROUP OBJECTS { systemBootNetwork, systemBootNetworkGateway, systemBootNetworkNetmask } STATUS current DESCRIPTION "Group all the system boot parameters together" ::= { alcatelIND1SystemMIBGroups 2 } systemHardwareGroup OBJECT-GROUP OBJECTS { systemHardwareFlashMfg, systemHardwareFlashSize, systemHardwareMemoryMfg, systemHardwareMemorySize, systemHardwareNVRAMBatteryLow, systemHardwareBootCpuType, systemHardwareJumperInterruptBoot, systemHardwareJumperForceUartDefaults, systemHardwareJumperRunExtendedMemoryDiagnostics, systemHardwareJumperSpare, systemHardwareFpgaVersionIndex, systemHardwareFpgaVersion, systemHardwareBootRomVersion, systemHardwareDefaultMiniBootVersion, systemHardwareBackupMiniBootVersion, systemHardwareCpldVersion, systemHardwareMinorFpgaVersion , systemHardwareProdRegId , systemHardwareRevisionRegister, systemHardwareUbootMinibootVersion, systemHardwareUbootVersion, systemHardwareXfpId } STATUS current DESCRIPTION "Group all the system Hardware Data together" ::= { alcatelIND1SystemMIBGroups 3 } systemServicesGroup OBJECT-GROUP OBJECTS { systemServicesDate, systemServicesTime, systemServicesTimezone, systemServicesTimezoneStartWeek, systemServicesTimezoneStartDay, systemServicesTimezoneStartMonth, systemServicesTimezoneStartTime, systemServicesTimezoneOffset, systemServicesTimezoneEndWeek, systemServicesTimezoneEndDay, systemServicesTimezoneEndMonth, systemServicesTimezoneEndTime, systemServicesEnableDST, systemServicesWorkingDirectory, systemServicesArg1, systemServicesArg2, systemServicesArg3, systemServicesArg4, systemServicesArg5, systemServicesArg6, systemServicesArg7, systemServicesArg8, systemServicesArg9, systemServicesAction, systemServicesResultCode, systemServicesResultString, systemServicesKtraceEnable, systemServicesSystraceEnable, systemServicesTtyLines, systemServicesTtyColumns, systemServicesMemMonitorEnable, systemServicesKtraceLevelAppId, systemServicesKtraceLevel, systemServicesSystraceLevelAppId, systemServicesSystraceLevel, systemUpdateStatus, systemUpdateErrorCode, systemServicesActionPercentComplete, systemServicesArchiveName, systemServicesArchiveType, systemServicesArchiveSize, systemServicesArchiveAttr, systemServicesUsbEnable, systemServicesUsbAutoCopyEnable, systemServicesUsbMounted, systemServicesArchiveIndex, systemServicesCurrentArchivePathName } STATUS current DESCRIPTION "Group all the system services parameters together" ::= { alcatelIND1SystemMIBGroups 4 } systemFileSystemGroup OBJECT-GROUP OBJECTS { systemFileSystemIndex, systemFileSystemFreeSpace, systemFileSystemName, systemFileSystemDirectoryName, systemFileSystemDirectoryDateTime, systemFileSystemFileIndex, systemFileSystemFileName, systemFileSystemFileType, systemFileSystemFileSize, systemFileSystemFileAttr, systemFileSystemFileDateTime } STATUS current DESCRIPTION "Group all the system flash file parameters together" ::= { alcatelIND1SystemMIBGroups 5 } systemSwitchLoggingGroup OBJECT-GROUP OBJECTS{ systemSwitchLoggingIndex, systemSwitchLoggingEnable, systemSwitchLoggingFlash, systemSwitchLoggingSocket, systemSwitchLoggingSocketIpAddr, systemSwitchLoggingConsole, systemSwitchLoggingClear, systemSwitchLoggingFileSize, systemSwitchLoggingLevel, systemSwitchLoggingApplicationAppId, systemSwitchLoggingApplicationAppName, systemSwitchLoggingApplicationSubAppId, systemSwitchLoggingApplicationSubAppName, systemSwitchLoggingApplicationSubAppLevel, systemSwitchLoggingApplicationSubAppVrfLevelIndex, systemSwitchLoggingApplicationSubAppVrfLevelString, systemSwitchLoggingAppName, systemSwitchLoggingDuplicateDetect, systemSwitchLoggingPreamble, systemSwitchLoggingDebug, systemSwitchLoggingVrf, systemSwitchLoggingHashAgeLimit, systemSwitchLoggingTty, systemSwitchLoggingSubAppNbr, systemSwitchLoggingLibraryName, systemSwitchLoggingLoopback0, systemSwitchLoggingConsoleLevel, systemSwitchLoggingHostCount, systemSwitchLoggingUserCommandStatus, systemSwitchLoggingSysLogFacilityId, systemSwitchLoggingHostIpAddr, systemSwitchLoggingHostPort, systemSwitchLoggingHostStatus, systemSwitchLoggingHostUserCommandHost, systemSwitchLoggingHostVrfName, systemSwitchLoggingHostv6IpAddr, systemSwitchLoggingHostv6Port, systemSwitchLoggingHostv6Status, systemSwitchLoggingHostv6UserCommandHost, systemSwitchLoggingHostv6VrfName, systemSwitchLoggingDgHostIpType, systemSwitchLoggingDgHostIpAddr } STATUS current DESCRIPTION "Group all the switch logging parameters together" ::= { alcatelIND1SystemMIBGroups 6 } systemDNSGroup OBJECT-GROUP OBJECTS{ systemDNSEnableDnsResolver, systemDNSDomainName, systemDNSNsAddr1, systemDNSNsAddr2, systemDNSNsAddr3, systemDNSNsIPv6Addr1, systemDNSNsIPv6Addr2, systemDNSNsIPv6Addr3 } STATUS current DESCRIPTION "Group all the systemDNS parameters together" ::= { alcatelIND1SystemMIBGroups 7 } systemBlueToothServicesGroup OBJECT-GROUP OBJECTS{ systemServicesBluetoothEnable, systemServicesBluetoothTxPower, systemServicesBluetoothStatus } STATUS current DESCRIPTION "Group all the systemFips parameters together" ::= { alcatelIND1SystemMIBGroups 8 } systemFipsGroup OBJECT-GROUP OBJECTS{ systemFipsAdminState, systemFipsOperState } STATUS current DESCRIPTION "Group all the systemFips parameters together" ::= { alcatelIND1SystemMIBGroups 9 } systemVcHardwareGroup OBJECT-GROUP OBJECTS { systemVcHardwareCpuVendor, systemVcHardwareCpuModel, systemVcHardwareFlashMfg, systemVcHardwareFlashSize, systemVcHardwareMemoryMfg, systemVcHardwareMemorySize, systemVcHardwareUbootVersion, systemVcHardwareFpga1Version, systemVcHardwareFpga2Version, systemVcHardwarePowerSuppliesPresent, systemVcHardwareNisPresent, systemVcHardwareCFMsPresent, systemVcHardwareFanTraysPresent } STATUS current DESCRIPTION "Group all the system VC Hardware Data together" ::= { alcatelIND1SystemMIBGroups 10 } systemSwlogGroup OBJECT-GROUP OBJECTS { systemSwlogName } STATUS current DESCRIPTION "Group all the swlog trap objects together" ::= { alcatelIND1SystemMIBGroups 11 } systemNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { systemSwlogSizeTrap } STATUS current DESCRIPTION "A collection of notifications for System Services events." ::= { alcatelIND1SystemMIBGroups 12 } END