ALCATEL-IND1-TIMETRA-SDP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Gauge32, Integer32, Unsigned32, IpAddress, Counter64, Counter32 FROM SNMPv2-SMI OBJECT-GROUP, NOTIFICATION-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF RowStatus, MacAddress, TimeStamp, DisplayString, TruthValue FROM SNMPv2-TC InterfaceIndexOrZero FROM IF-MIB InetAddressType, InetAddress FROM INET-ADDRESS-MIB ServiceAdminStatus, TmnxServId, TmnxCustId, TNamedItem, SdpBindId, TNamedItemOrEmpty, TmnxVRtrMplsLspID, TmnxOperState, TmnxIgmpVersion, TmnxEnabledDisabled, TItemDescription, TPolicyStatementNameOrEmpty, TmnxVPNRouteDistinguisher FROM ALCATEL-IND1-TIMETRA-TC-MIB tmnxServObjs, tmnxServConformance, tmnxServNotifications, tmnxSvcObjs, custId, svcId, svcVpnId, tstpTraps, tmnxOtherBridgeId, tmnxCustomerBridgeId, tmnxCustomerRootBridgeId, tmnxOldSdpBindTlsStpPortState, svcTlsStpDesignatedRoot, tlsDhcpPacketProblem, svcDhcpLseStateNewCiAddr, svcDhcpLseStateNewChAddr, svcDhcpLseStateOldCiAddr, svcDhcpLseStateOldChAddr, svcDhcpClientLease, svcDhcpLseStatePopulateError, svcTlsMacMoveMaxRate, svcDhcpProxyError, svcDhcpCoAError, svcDhcpPacketProblem, svcDhcpSubAuthError, ServObjName, ServObjDesc, VpnId, SdpId, PWTemplateId, SdpBindTlsBpduTranslation, TlsLimitMacMoveLevel, TlsLimitMacMove, SdpBindVcType, StpExceptionCondition, LspIdList, BridgeId, TStpPortState, StpPortRole, StpProtocol, MvplsPruneState, TdmOptionsSigPkts, TdmOptionsCasTrunkFraming, SdpBFHundredthsOfPercent, SdpBindBandwidth, L2ptProtocols, L2RouteOrigin, ConfigStatus FROM ALCATEL-IND1-TIMETRA-SERV-MIB timetraSRMIBModules FROM ALCATEL-IND1-TIMETRA-GLOBAL-MIB TFilterID FROM ALCATEL-IND1-TIMETRA-FILTER-MIB tmnxChassisIndex, tmnxCardSlotNum, tmnxMDASlotNum FROM ALCATEL-IND1-TIMETRA-CHASSIS-MIB; timetraServicesSdpMIBModule MODULE-IDENTITY LAST-UPDATED "0710010000Z" ORGANIZATION "Alcatel" CONTACT-INFO "Alcatel 7x50 Support Web: http://www.alcatel.com/comps/pages/carrier_support.jhtml" DESCRIPTION "This document is the SNMP MIB module to manage and provision the various services of the Alcatel 7x50 SR system. Copyright 2003-2008 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel's proprietary intellectual property. Alcatel retains all title and ownership in the Specification, including any revisions. Alcatel grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied `as is', and Alcatel makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification." -- -- Revision History -- REVISION "0710010000Z" DESCRIPTION "Rev 1.0 01 Oct 2007 00:00 1.0 release of the TIMETRA-SDP-MIB from TIMETRA-SERV-MIB." ::= { timetraSRMIBModules 56 } -- -------------------------------------------------------------------- -- ALCATEL-IND1-TIMETRA-SERV-MIB organisation -- -------------------------------------------------------------------- tmnxSdpObjs OBJECT IDENTIFIER ::= { tmnxServObjs 4 } tmnxSdpNotifyObjs OBJECT IDENTIFIER ::= { tmnxSdpObjs 100 } tmnxSdpConformance OBJECT IDENTIFIER ::= { tmnxServConformance 4 } sdpTrapsPrefix OBJECT IDENTIFIER ::= { tmnxServNotifications 4 } sdpTraps OBJECT IDENTIFIER ::= { sdpTrapsPrefix 0 } -- -------------------------------------------------------------------- -- tmnxSdpObjs group -- -------------------------------------------------------------------- sdpNumEntries OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of SDPs configured in this device." ::= { tmnxSdpObjs 1 } sdpNextFreeId OBJECT-TYPE SYNTAX SdpId MAX-ACCESS read-only STATUS current DESCRIPTION "The next available value for sdpId." ::= { tmnxSdpObjs 2 } -- ---------------------------- -- SDP Table -- ---------------------------- sdpInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SdpInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains SDP information." ::= { tmnxSdpObjs 3 } sdpInfoEntry OBJECT-TYPE SYNTAX SdpInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a specific SDP." INDEX { sdpId } ::= { sdpInfoTable 1 } SdpInfoEntry ::= SEQUENCE { sdpId SdpId, sdpRowStatus RowStatus, sdpDelivery INTEGER, sdpFarEndIpAddress IpAddress, sdpLspList LspIdList, sdpDescription ServObjDesc, sdpLabelSignaling INTEGER, sdpAdminStatus ServiceAdminStatus, sdpOperStatus INTEGER, sdpAdminPathMtu INTEGER, sdpOperPathMtu Integer32, sdpKeepAliveAdminStatus INTEGER, sdpKeepAliveOperStatus INTEGER, sdpKeepAliveHelloTime INTEGER, sdpKeepAliveMaxDropCount INTEGER, sdpKeepAliveHoldDownTime INTEGER, sdpLastMgmtChange TimeStamp, sdpKeepAliveHelloMessageLength INTEGER, sdpKeepAliveNumHelloRequestMessages Unsigned32, sdpKeepAliveNumHelloResponseMessages Unsigned32, sdpKeepAliveNumLateHelloResponseMessages Unsigned32, sdpKeepAliveHelloRequestTimeout INTEGER, sdpLdpEnabled TruthValue, sdpVlanVcEtype Unsigned32, sdpAdvertisedVllMtuOverride TruthValue, sdpOperFlags BITS, sdpLastStatusChange TimeStamp, sdpMvplsMgmtService TmnxServId, sdpMvplsMgmtSdpBndId SdpBindId, sdpCollectAcctStats TruthValue, sdpAccountingPolicyId Unsigned32, sdpClassFwdingEnabled TruthValue, sdpClassFwdingDefaultLsp TmnxVRtrMplsLspID, sdpClassFwdingMcLsp TmnxVRtrMplsLspID, sdpMetric Unsigned32, sdpAutoSdp TruthValue, sdpSnmpAllowed TruthValue, sdpPBBEtype Unsigned32, sdpBandwidthBookingFactor Unsigned32, sdpOperBandwidth Unsigned32, sdpAvailableBandwidth Unsigned32, sdpMaxBookableBandwidth Unsigned32, sdpBookedBandwidth Unsigned32, sdpCreationOrigin L2RouteOrigin } sdpId OBJECT-TYPE SYNTAX SdpId MAX-ACCESS read-only STATUS current DESCRIPTION "SDP identifier." ::= { sdpInfoEntry 1 } sdpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this row. The only values supported during a set operation are 'createAndGo' and 'destroy'. To delete an entry from this table, the corresponding SDP must be administratively down, not bound to any service, and not in use as a mirror destination." ::= { sdpInfoEntry 2 } sdpDelivery OBJECT-TYPE SYNTAX INTEGER { gre (1), mpls (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the type of delivery used by this SDP: e.g. GRE or MPLS. The value of this object must be specified when the row is created and cannot be changed while the row status is 'active'." ::= { sdpInfoEntry 3 } sdpFarEndIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the IP address of the remote end of the GRE or MPLS tunnel defined by this SDP. The value of this object must be set for the row to become 'active', and can only be changed while the admin status of the SDP is 'down'." ::= { sdpInfoEntry 4 } sdpLspList OBJECT-TYPE SYNTAX LspIdList MAX-ACCESS read-create STATUS current DESCRIPTION "When the SDP delivery specified by sdpDelivery is 'mpls', this object specifies the list of LSPs used to reach the far-end ESR device. All the LSPs in this list must terminate at the IP address specified by sdpFarEndIpAddress. This object is otherwise insignificant and should contain a value of 0. When this list has more than one element, the Alcatel 7x50 SR router will use all of the LSPs for load balancing purposes. Each LSP ID in the list corresponds to the vRtrMplsLspIndex of the given MPLS LSP." ::= { sdpInfoEntry 5 } sdpDescription OBJECT-TYPE SYNTAX ServObjDesc MAX-ACCESS read-create STATUS current DESCRIPTION "Generic information about this SDP." DEFVAL { "" } ::= { sdpInfoEntry 6 } sdpLabelSignaling OBJECT-TYPE SYNTAX INTEGER { none (1), tldp (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the signaling protocol used to obtain the ingress and egress labels used in frames transmitted and received on this SDP. When the value of this object is 'none' then the labels are manually assigned at the time the SDP is bound to a service. The value of this object can only be changed while the admin status of the SDP is 'down'." DEFVAL { tldp } ::= { sdpInfoEntry 7 } sdpAdminStatus OBJECT-TYPE SYNTAX ServiceAdminStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The desired state of this SDP." DEFVAL { down } ::= { sdpInfoEntry 8 } sdpOperStatus OBJECT-TYPE SYNTAX INTEGER { up (1), notAlive (2), notReady (3), invalidEgressInterface (4), transportTunnelDown (5), down (6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operating state of this SDP. The value 'notAlive' is valid only when keep-alive is enabled, and it means that the keep-alive operating status is not alive. The value 'notReady' is valid only when this SDP uses a label signaling protocol (e.g. TLDP) and it means that the signaling session with the far-end peer has not been established. The value 'invalidEgressInterface' indicates that the IOM's have detected that the egress interface towards the far-end device is not a network port." ::= { sdpInfoEntry 9 } sdpAdminPathMtu OBJECT-TYPE SYNTAX INTEGER (0|576..9194) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the desired largest service frame size (in octets) that can be transmitted through this SDP to the far-end ESR, without requiring the packet to be fragmented. The default value of zero indicates that the path MTU should be computed dynamically from the corresponding MTU of the tunnel." DEFVAL { 0 } ::= { sdpInfoEntry 10 } sdpOperPathMtu OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the actual largest service frame size (in octets) that can be transmitted through this SDP to the far-end ESR, without requiring the packet to be fragmented. In order to be able to bind this SDP to a given service, the value of this object must be equal to or larger than the MTU of the service, as defined by its svcMtu." ::= { sdpInfoEntry 11 } sdpKeepAliveAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to enable or disable the keep-alive protocol used to determine the operating status of this SDP." DEFVAL { disabled } ::= { sdpInfoEntry 12 } sdpKeepAliveOperStatus OBJECT-TYPE SYNTAX INTEGER { alive (1), noResponse (2), senderIdInvalid (3), responderIdError (4), disabled (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current status of the keep-alive protocol. The value 'alive' indicates that the far-end ESR is replying the SDP Echo Requests messages sent by this device indicating no error condition. The value 'noResponse' indicates that the number of consecutive SDP Echo Request messages unack- nowledged by the far-end ESR exceeded the limit defined by sdpKeepAliveMaxDropCount. The values 'senderIdInvalid' and 'responderIdError' are two error conditions detected by the far-end ESR. The value 'disabled' indicates that the keep-alive protocol is not enabled." ::= { sdpInfoEntry 13 } sdpKeepAliveHelloTime OBJECT-TYPE SYNTAX INTEGER (1..3600) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies how often the SDP Echo Request messages are transmitted on this SDP." DEFVAL { 10 } ::= { sdpInfoEntry 14 } sdpKeepAliveMaxDropCount OBJECT-TYPE SYNTAX INTEGER (1..5) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the maximum number of consecutive SDP Echo Request messages that can be unacknowledged before the keep-alive protocol reports a fault." DEFVAL { 3 } ::= { sdpInfoEntry 15 } sdpKeepAliveHoldDownTime OBJECT-TYPE SYNTAX INTEGER (0..3600) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the amount of time to wait before the keep-alive operating status is eligible to enter the 'alive' state." DEFVAL { 10 } ::= { sdpInfoEntry 16 } sdpLastMgmtChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time of the most recent management-initiated change to this SDP." ::= { sdpInfoEntry 17 } sdpKeepAliveHelloMessageLength OBJECT-TYPE SYNTAX INTEGER (0 | 40..9198) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the length of the SDP Echo Request messages transmitted on this SDP. The default value of zero indicates that the message length should be equal to the SDP's operating path MTU, as specified by sdpOperPathMtu. When the default value is overridden, the message length is sdpKeepAliveHelloMessageLength." DEFVAL { 0 } ::= { sdpInfoEntry 18 } sdpKeepAliveNumHelloRequestMessages OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of SDP Echo Request messages transmitted since the keep-alive was administratively enabled or the counter was cleared." ::= { sdpInfoEntry 19 } sdpKeepAliveNumHelloResponseMessages OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of SDP Echo Response messages received since the keep-alive was administratively enabled or the counter was cleared." ::= { sdpInfoEntry 20 } sdpKeepAliveNumLateHelloResponseMessages OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of SDP Echo Response messages received after the corresponding Request timeout timer expired." ::= { sdpInfoEntry 21 } sdpKeepAliveHelloRequestTimeout OBJECT-TYPE SYNTAX INTEGER (1..10) MAX-ACCESS read-create STATUS current DESCRIPTION "The number of seconds to wait for an SDP Echo Response message before declaring a timeout." DEFVAL { 5 } ::= { sdpInfoEntry 22 } sdpLdpEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When the value of this object is 'true' the transport LSP's are signalled by LDP, as opposed to being provisioned static or RSVP-signalled LSP's. This object applies only to MPLS SDP's." DEFVAL { false } ::= { sdpInfoEntry 23 } sdpVlanVcEtype OBJECT-TYPE SYNTAX Unsigned32 ('600'H..'ffff'H) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the Ethertype used in frames sent out this SDP, when the VC type is vlan." DEFVAL { '8100'H } ::= { sdpInfoEntry 24 } sdpAdvertisedVllMtuOverride OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When the value of this object is 'true' the advertised MTU of a VLL spoke SDP bind includes the 14-byte L2 header, so that it is backward compatible with pre-2.0 software." DEFVAL { false } ::= { sdpInfoEntry 25 } sdpOperFlags OBJECT-TYPE SYNTAX BITS { sdpAdminDown (0), signalingSessionDown (1), transportTunnelDown (2), keepaliveFailure (3), invalidEgressInterface (4), noSystemIpAddress (5), transportTunnelUnstable (6) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies all the conditions that affect the operating status of this SDP." ::= { sdpInfoEntry 26 } sdpLastStatusChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time of the most recent operating status change to this SDP." ::= { sdpInfoEntry 27 } sdpMvplsMgmtService OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpMvplsMgmtService indicates the service Id of the service where the STP instance is running that is managing this SDP. This object is only valid if sdpMvplsMgmtService is different from 0." ::= { sdpInfoEntry 28 } sdpMvplsMgmtSdpBndId OBJECT-TYPE SYNTAX SdpBindId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpMvplsMgmtSdpBndId indicates which SDP bind in the mVPLS instance specified in sdpMvplsMgmtService is controlling this SDP. This object is only valid if sdpMvplsMgmtService is different from 0." ::= { sdpInfoEntry 29 } sdpCollectAcctStats OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sdpCollectAcctStats specifies whether the agent collects accounting statistics for this SDP. When the value is 'true' the agent collects accounting statistics on this SDP." DEFVAL { false } ::= { sdpInfoEntry 30 } sdpAccountingPolicyId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sdpAccountingPolicyId specifies the policy to use to collect accounting statistics on this SDP. The value zero indicates that the agent should use the default accounting policy, if one exists." DEFVAL { 0 } ::= { sdpInfoEntry 31 } sdpClassFwdingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sdpClassFwdingEnabled specifies the admin state of class-based forwarding on this SDP. When the value is 'true', class-based forwarding is enabled." DEFVAL { false } ::= { sdpInfoEntry 32 } sdpClassFwdingDefaultLsp OBJECT-TYPE SYNTAX TmnxVRtrMplsLspID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sdpClassFwdingDefaultLsp specifies the LSP ID that is used as a default when class-based forwarding is enabled on this SDP. This object must be set when enabling class-based forwarding." DEFVAL { 0 } ::= { sdpInfoEntry 33 } sdpClassFwdingMcLsp OBJECT-TYPE SYNTAX TmnxVRtrMplsLspID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sdpClassFwdingMcLsp specifies the LSP ID that all multicast traffic will be forwarded on when class-based forwarding is enabled on this SDP. When this object has its default value, multicast traffic will be forwarded on an LSP according to its forwarding class mapping." DEFVAL { 0 } ::= { sdpInfoEntry 34 } sdpMetric OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sdpMetric specifies the metric to be used within the Tunnel Table Manager for decision making purposes. When multiple SDPs going to the same destination exist, this value is used as a tie-breaker by Tunnel Table Manager users like MP-BGP to select route with lower value." DEFVAL { 0 } ::= { sdpInfoEntry 35 } sdpAutoSdp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpAutoSdp indicates whether this is an Auto generated SDP from RADIUS discovery or BGP auto-discovery." ::= { sdpInfoEntry 36 } sdpSnmpAllowed OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpSnmpAllowed indicates if SNMP sets are allowed on this SDP." ::= { sdpInfoEntry 37 } sdpPBBEtype OBJECT-TYPE SYNTAX Unsigned32 ('600'H..'ffff'H) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the Ethertype used in frames sent out on this SDP when sdpBindVcType is 'vlan' for Provider Backbone Bridging frames." DEFVAL { '88E7'H } ::= { sdpInfoEntry 38 } sdpBandwidthBookingFactor OBJECT-TYPE SYNTAX Unsigned32 (0..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "sdpBandwidthBookingFactor is used to calculate the max SDP available bandwidth. The value of sdpBandwidthBookingFactor specifies the percentage of the SDP max available bandwidth for VLL call admission. When the value of sdpBandwidthBookingFactor is set to zero (0), no new VLL spoke-sdp bindings with non-zero bandwidth are permitted with this SDP. Overbooking, >100% is allowed." DEFVAL { 100 } ::= { sdpInfoEntry 39 } sdpOperBandwidth OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilo-bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpOperBandwidth indicates the operational Bandwidth in kilo-bits per seconds (Kbps) available for this SDP. The value sdpOperBandwidth is determined by the sum of the bandwidth of all the RSVP LSPs used by the SDP." ::= { sdpInfoEntry 40 } sdpAvailableBandwidth OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilo-bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpAvailableBandwidth indicates the Bandwidth that is still free for booking by the SDP bindings on the SDP." ::= { sdpInfoEntry 41 } sdpMaxBookableBandwidth OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilo-bits per second" MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of sdpMaxBookableBandwidth indicates the max Bandwidth that the SDP has for booking by the SDP bindings. The value of sdpMaxBookableBandwidth is calculated as follow: sdpMaxBookableBandwidth = sdpOperBandwidth * sdpBandwidthBookingFactor " ::= { sdpInfoEntry 42 } sdpBookedBandwidth OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilo-bits per second" MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of sdpBookedBandwidth indicates the SDP Bandwidth that has been booked by the SDP bindings." ::= { sdpInfoEntry 43 } sdpCreationOrigin OBJECT-TYPE SYNTAX L2RouteOrigin MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpCreationOrigin indicates the protocol or mechanism which created this SDP." ::= { sdpInfoEntry 44 } -- ------------------------- -- SDP Bind Table -- ------------------------- sdpBindTable OBJECT-TYPE SYNTAX SEQUENCE OF SdpBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains SDP binding information." ::= { tmnxSdpObjs 4 } sdpBindEntry OBJECT-TYPE SYNTAX SdpBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a specific SDP binding." INDEX { svcId, sdpBindId } ::= { sdpBindTable 1 } SdpBindEntry ::= SEQUENCE { sdpBindId SdpBindId, sdpBindRowStatus RowStatus, sdpBindAdminIngressLabel Unsigned32, sdpBindAdminEgressLabel Unsigned32, sdpBindOperIngressLabel Unsigned32, sdpBindOperEgressLabel Unsigned32, sdpBindAdminStatus ServiceAdminStatus, sdpBindOperStatus INTEGER, sdpBindLastMgmtChange TimeStamp, sdpBindType INTEGER, sdpBindIngressMacFilterId TFilterID, sdpBindIngressIpFilterId TFilterID, sdpBindEgressMacFilterId TFilterID, sdpBindEgressIpFilterId TFilterID, sdpBindVpnId VpnId, sdpBindCustId TmnxCustId, sdpBindVcType SdpBindVcType, sdpBindVlanVcTag Unsigned32, sdpBindSplitHorizonGrp ServObjName, sdpBindOperFlags BITS, sdpBindLastStatusChange TimeStamp, sdpBindIesIfIndex InterfaceIndexOrZero, sdpBindMacPinning TmnxEnabledDisabled, sdpBindIngressIpv6FilterId TFilterID, sdpBindEgressIpv6FilterId TFilterID, sdpBindCollectAcctStats TruthValue, sdpBindAccountingPolicyId Unsigned32, sdpBindPwPeerStatusBits BITS, sdpBindPeerVccvCvBits BITS, sdpBindPeerVccvCcBits BITS, sdpBindControlWordBit TruthValue, sdpBindOperControlWord TruthValue, sdpBindEndPoint ServObjName, sdpBindEndPointPrecedence Unsigned32, sdpBindIsICB TruthValue, sdpBindPwFaultInetAddressType InetAddressType, sdpBindPwFaultInetAddress InetAddress, sdpBindClassFwdingOperState TmnxOperState, sdpBindForceVlanVcForwarding TruthValue, sdpBindAdminBandwidth SdpBindBandwidth, sdpBindOperBandwidth SdpBindBandwidth } sdpBindId OBJECT-TYPE SYNTAX SdpBindId MAX-ACCESS read-only STATUS current DESCRIPTION "SDP Binding identifier." ::= { sdpBindEntry 1 } sdpBindRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this row. The only values supported during a set operation are 'createAndGo' and 'destroy'." ::= { sdpBindEntry 2 } sdpBindAdminIngressLabel OBJECT-TYPE SYNTAX Unsigned32 (0 | 1 | 2048..18431) MAX-ACCESS read-create STATUS current DESCRIPTION "The static MPLS VC label used by the far-end device to send packets to this device in this service via this SDP. The value of sdpBindAdminIngressLabel is 1 when it is used by a mirror service. All mirror SDPs use this label to avoid the unnecessary use of additional labels." DEFVAL { 0 } ::= { sdpBindEntry 3 } sdpBindAdminEgressLabel OBJECT-TYPE SYNTAX Unsigned32 (0 | 16..1048575) MAX-ACCESS read-create STATUS current DESCRIPTION "The static MPLS VC label used by this device to send packets to the far-end device in this service via this SDP." DEFVAL { 0 } ::= { sdpBindEntry 4 } sdpBindOperIngressLabel OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..1048575) MAX-ACCESS read-only STATUS current DESCRIPTION "The MPLS label used by the far-end device to send packets to this device in this service via this SDP. This label is either sdpBindAdminIngressLabel, if not null, or the one obtained via the SDP's signaling protocol." DEFVAL { 0 } ::= { sdpBindEntry 5 } sdpBindOperEgressLabel OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..1048575) MAX-ACCESS read-only STATUS current DESCRIPTION "The MPLS label used by this device to send packets to the far-end device in this service via this SDP. This label is either sdpBindAdminEgressLabel, if not null, or the one obtained via the SDP's signaling protocol." DEFVAL { 0 } ::= { sdpBindEntry 6 } sdpBindAdminStatus OBJECT-TYPE SYNTAX ServiceAdminStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The desired state of this Service-SDP binding." DEFVAL { up } ::= { sdpBindEntry 7 } sdpBindOperStatus OBJECT-TYPE SYNTAX INTEGER { up (1), noEgressLabel (2), noIngressLabel (3), noLabels (4), down (5), svcMtuMismatch (6), sdpPathMtuTooSmall (7), sdpNotReady (8), sdpDown (9), sapDown (10) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindOperStatus indicates the operating status of this Service-SDP binding. 'up' The Service-SDP binding is operational. 'noEgressLabel' The ingress label is available but the egress one is missing. 'noIngressLabel' The egress label is available but the ingress one is not. 'noLabels' Both the ingress and the egress labels are missing. 'down' The binding is administratively down. 'svcMtuMismatch' Both labels are available, but a service MTU mismatch was detected between the local and the far-end devices. 'sdpPathMtuTooSmall' The operating path MTU of the corresponding SDP is smaller than the service MTU. 'sdpNotReady' The SDP's signaling session is down. 'sdpDown' The SDP is not operationally up. 'sapDown' The SAP associated with the service is down." ::= { sdpBindEntry 8 } sdpBindLastMgmtChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time of the most recent management-initiated change to this Service-SDP binding." ::= { sdpBindEntry 9 } sdpBindType OBJECT-TYPE SYNTAX INTEGER { spoke (1), mesh (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates whether this Service SDP binding is a spoke or a mesh. The value of this object must be specified when the row is created and cannot be changed while the row status is 'active'." DEFVAL { mesh } ::= { sdpBindEntry 10 } sdpBindIngressMacFilterId OBJECT-TYPE SYNTAX TFilterID MAX-ACCESS read-create STATUS current DESCRIPTION "The row index in the tMacFilterTable corresponding to this ingress filter, or zero if no filter is specified." DEFVAL { 0 } ::= { sdpBindEntry 11 } sdpBindIngressIpFilterId OBJECT-TYPE SYNTAX TFilterID MAX-ACCESS read-create STATUS current DESCRIPTION "The row index in the tIPFilterTable corresponding to this ingress filter, or zero if no filter is specified." DEFVAL { 0 } ::= { sdpBindEntry 12 } sdpBindEgressMacFilterId OBJECT-TYPE SYNTAX TFilterID MAX-ACCESS read-create STATUS current DESCRIPTION "The row index in the tMacFilterTable corresponding to this egress filter, or zero if no filter is specified." DEFVAL { 0 } ::= { sdpBindEntry 13 } sdpBindEgressIpFilterId OBJECT-TYPE SYNTAX TFilterID MAX-ACCESS read-create STATUS current DESCRIPTION "The row index in the tIPFilterTable corresponding to this egress filter, or zero if no filter is specified." DEFVAL { 0 } ::= { sdpBindEntry 14 } sdpBindVpnId OBJECT-TYPE SYNTAX VpnId MAX-ACCESS read-only STATUS current DESCRIPTION "The VPN ID of the associated service." ::= { sdpBindEntry 15 } sdpBindCustId OBJECT-TYPE SYNTAX TmnxCustId MAX-ACCESS read-only STATUS current DESCRIPTION "The Customer ID of the associated service." ::= { sdpBindEntry 16 } sdpBindVcType OBJECT-TYPE SYNTAX SdpBindVcType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sdpBindVcType is an enumerated integer that specifies the type of virtual circuit (VC) associated with the SDP binding. The value 'vpls' is no longer supported." ::= { sdpBindEntry 17 } sdpBindVlanVcTag OBJECT-TYPE SYNTAX Unsigned32 ('0000'H..'0fff'H) MAX-ACCESS read-create STATUS current DESCRIPTION "" DEFVAL { '0fff'H } ::= { sdpBindEntry 18 } sdpBindSplitHorizonGrp OBJECT-TYPE SYNTAX ServObjName MAX-ACCESS read-create STATUS current DESCRIPTION "This value of the object sdpBindSplitHorizonGrp specifies the name of the split-horizon group where the spoke SDP Bind belongs to. This object can be set only at the time the row is created. Per default a spoke SDP Bind does not belong to any split-horizon group. The name specified must correspond to an existing split-horizon group in the TLS service where this spoke SDP Bind is defined." DEFVAL { "" } ::= { sdpBindEntry 19 } sdpBindOperFlags OBJECT-TYPE SYNTAX BITS { sdpBindAdminDown (0), -- SDP Bind is admin down svcAdminDown (1), -- Service is admin down sapOperDown (2), -- SAP is oper down (VLL's only) sdpOperDown (3), -- SDP is oper down sdpPathMtuTooSmall (4), -- SDP's path MTU is less than Service MTU noIngressVcLabel (5), -- No ingress VC label noEgressVcLabel (6), -- No egress VC label svcMtuMismatch (7), -- Service MTU mismatch with the remote PE vcTypeMismatch (8), -- VC type mismatch with the remote PE relearnLimitExceeded (9), -- MAC relearn limit was exceeded (TLS only) iesIfAdminDown (10),-- IP interface is admin down (IES and VPRN only) releasedIngressVcLabel (11),-- Peer released our ingress VC label labelsExhausted (12),-- Label Manager has ran out of labels svcParamMismatch (13),-- Service-specific parameter mismatch insufficientBandwidth (14),-- Insufficient bandwidth to allocate to SDP binding pwPeerFaultStatusBits (15),-- Received PW fault status bits from peer meshSdpDown (16) -- Mesh SDP Down } MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies all the conditions that affect the operating status of this SDP Bind." ::= { sdpBindEntry 20 } sdpBindLastStatusChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindLastStatusChange specifies the value of sysUpTime at the time of the most recent operating status change to this SDP Bind." ::= { sdpBindEntry 21 } sdpBindIesIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "When this SDP Bind is defined on an IES service and the value of sdpBindType is 'spoke', this object specifies the index of the associated IES interface. The value of this object can be set only when the row is created and cannot be changed while the row status is 'active'. This object is otherwise not significant and should have the value zero." ::= { sdpBindEntry 22 } sdpBindMacPinning OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sdpBindMacPinning specifies whether or not MAC address pinning is active on this SDP bind (mesh or spoke). Setting the value to enable disables re-learning of MAC addresses on other SAPs or SDPs within the same VPLS; the MAC address will hence remain attached to the SDP Bind for the duration of its age-timer. This object has effect only for MAC addresses learned via the normal MAC learning process, and not for entries learned via DHCP. The value will be set by default to disabled. However for a spoke SDP that belongs to a residential SHG, the value is set to enabled by the system, and cannot be altered by the operator. This object applies to spoke-SDP associated with the service with svcType set to 'tls'." ::= { sdpBindEntry 23 } sdpBindIngressIpv6FilterId OBJECT-TYPE SYNTAX TFilterID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sdpBindIngressIpv6FilterId specifies the row index in the tIPv6FilterTable corresponding to this ingress ipv6 filter, or zero if no ipv6 filter is specified." DEFVAL { 0 } ::= { sdpBindEntry 24 } sdpBindEgressIpv6FilterId OBJECT-TYPE SYNTAX TFilterID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sdpBindEgressIpv6FilterId specifies the row index in the tIPv6FilterTable corresponding to this egress ipv6 filter, or zero if no ipv6 filter is specified." DEFVAL { 0 } ::= { sdpBindEntry 25 } sdpBindCollectAcctStats OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sdpBindCollectAcctStats specifies whether the agent collects accounting statistics for this SDP bind. When the value is 'true' the agent collects accounting statistics on this SDP bind." DEFVAL { false } ::= { sdpBindEntry 26 } sdpBindAccountingPolicyId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sdpBindAccountingPolicyId specifies the policy to use to collect accounting statistics on this SDP bind. The value zero indicates that the agent should use the default accounting policy, if one exists." DEFVAL { 0 } ::= { sdpBindEntry 27 } sdpBindPwPeerStatusBits OBJECT-TYPE SYNTAX BITS { pwNotForwarding (0), -- Pseudo Wire Not Forwarding lacIngressFault (1), -- Local Attachment Circuit Rx -- Fault lacEgresssFault (2), -- Local Attachment Circuit Tx -- Fault psnIngressFault (3), -- Local PSN-facing PW Rx Fault psnEgressFault (4), -- Local PSN-facing PW Tx Fault pwFwdingStandby (5) -- Pseudo Wire in Standby mode } MAX-ACCESS read-only STATUS current DESCRIPTION "sdpBindPwPeerStatusBits indicates the bits set by the LDP peer when there is a fault on its side of the pseudowire. LAC failures occur on the SAP that has been configured on the PIPE service, PSN bits are set by SDP-binding failures on the PIPE service. The pwNotForwarding bit is set when none of the above failures apply, such as an MTU mismatch failure. This value is only applicable if the peer is using the pseudowire status signalling method to indicate faults." ::= { sdpBindEntry 28 } sdpBindPeerVccvCvBits OBJECT-TYPE SYNTAX BITS { icmpPing (0), lspPing (1), bfdFaultDetection (2), bfdFaultDetectionAndSignalling (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "sdpBindPeerVccvCvBits indicates the CV type bits set by the LDP peer if it supports VCCV (Virtual Circuit Connection Verification) on a pseudowire. If the peer does not send VCCV information, or does not support it, the bits will be set to 0." ::= { sdpBindEntry 29 } sdpBindPeerVccvCcBits OBJECT-TYPE SYNTAX BITS { pwe3ControlWord (0), mplsRouterAlertLabel (1), mplsPwDemultiplexorLabel (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "sdpBindPeerVccvCcBits indicates the CC type bits set by the LDP peer if it supports VCCV (Virtual Circuit Connection Verification) on a pseudowire. If the peer does not send VCCV information, or does not support it, the bits will all be 0." ::= { sdpBindEntry 30 } sdpBindControlWordBit OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "sdpBindControlWordBit specifies whether the use of the 'ControlWord' is preferred or not. The value of sdpBindControlWordBit is exchanged with LDP peer during pseudowire negotiation time. The default value is determined by sdpBindVcType. sdpBindVcType of atmSdu and frDlci must have default value of 'true'. Other values of sdpBindVcType must have default value of 'false'." ::= { sdpBindEntry 31 } sdpBindOperControlWord OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "sdpBindOperControlWord indicates whether the 'ControlWord' is used or not. The value of sdpBindOperControlWord is negotiated with the LDP peer. When both the local and the peer prefer the use of the 'ControlWord', sdpBindOperControlWord has the value of 'true'." ::= { sdpBindEntry 32 } sdpBindEndPoint OBJECT-TYPE SYNTAX ServObjName MAX-ACCESS read-create STATUS current DESCRIPTION "sdpBindEndPoint specifies the service endpoint to which this SDP bind is attached. The svcId of the SDP bind MUST match the svcId of the service endpoint." DEFVAL { "" } ::= { sdpBindEntry 33 } sdpBindEndPointPrecedence OBJECT-TYPE SYNTAX Unsigned32 (0..4) MAX-ACCESS read-create STATUS current DESCRIPTION "sdpBindEndPointPrecedence specifies the precedence of this SDP bind when there are multiple SDP binds attached to one service endpoint. The value 0 can only be assigned to one SDP bind, making it the primary SDP bind. When an SDP bind goes down, the next highest precedence SDP bind begins forwarding traffic." DEFVAL { 4 } ::= { sdpBindEntry 34 } sdpBindIsICB OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "sdpBindIsICB specifies whether this sdpBind is an inter-chassis backup SDP bind." DEFVAL { false } ::= { sdpBindEntry 35 } sdpBindPwFaultInetAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindPwFaultInetAddressType indicates the address type of sdpBindPwFaultInetAddress." ::= { sdpBindEntry 36 } sdpBindPwFaultInetAddress OBJECT-TYPE SYNTAX InetAddress (SIZE(0|4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindPwFaultInetAddress indicates the IP address that was included in the pseudowire status message sent by the LDP peer. This value is only applicable if the peer is using the pseudowire status signalling method to indicate faults." ::= { sdpBindEntry 37 } sdpBindClassFwdingOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindClassFwdingOperState indicates the operational state of forwarding-class based forwarding on this sdpBind. When the SDP this sdpBind is bound to has sdpClassFwdingEnabled set to 'false', the value of sdpBindClassFwdingOperState is 'outOfService'. When the SDP this sdpBind is bound to has sdpClassFwdingEnabled set to 'true' and the svcType of the service this sdpBind is defined on is 'tls', 'vprn', or 'ies', the value of sdpBindClassFwdingOperState is 'inService'. If the service has svcVcSwitching set to 'true', the value of sdpBindClassFwdingOperState is 'inService' When the SDP this sdpBind is bound to has sdpClassFwdingEnabled set to 'true' and the svcType of the service this sdpBind is defined on is 'epipe', 'apipe', 'fpipe', or 'ipipe' with no SAP defined on the service, the value of sdpBindClassFwdingOperState is 'unknown'. If the service has a SAP with a NULL sapIngressSharedQueuePolicy, the value of sdpBindClassFwdingOperState is 'outOfService'. If the service has a SAP with a non-NULL sapIngressSharedQueuePolicy, the value of sdpBindClassFwdingOperState is 'inService'." ::= { sdpBindEntry 38 } sdpBindForceVlanVcForwarding OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sdpBindForceVlanVcForwarding specifies whether or not vc-vlan-type forwarding is forced in the data-path for the sdp which have sdpBindVcType set to 'ether'. When set to 'true' vc-vlan-type forwarding is forced. An 'inconsistentValue' error is returned when an attempt is made to set the value of sdpBindForceVlanVcForwarding to 'true' and sdpBindVcType is not set to 'ether'." DEFVAL { false } ::= { sdpBindEntry 39 } sdpBindAdminBandwidth OBJECT-TYPE SYNTAX SdpBindBandwidth UNITS "kilo-bits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object sdpBindAdminBandwidth specifies the bandwidth that needs to be reserved for this SDP binding in kilo-bits per second. The SdpBindBandwidth object only applies to the SDP bindings under the epipe(1), apipe(7), fpipe(8), ipipe(9) and cpipe(10) services." DEFVAL { 0 } ::= { sdpBindEntry 40 } sdpBindOperBandwidth OBJECT-TYPE SYNTAX SdpBindBandwidth UNITS "kilo-bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindOperBandwidth indicates the bandwidth that has been reserved for this SDP binding in kilo-bits per second. The value 0 indicates that SDP doesn't have bandwidth to satisfy the bandwidth requirement of this SDP binding. The sdpBindOperBandwidth object only applies to the SDP bindings under the epipe(1), apipe(7), fpipe(8), ipipe(9) and cpipe(10) services." ::= { sdpBindEntry 41 } -- ---------------------------------- -- Base SDP Binding Statistics Table -- ---------------------------------- sdpBindBaseStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SdpBindBaseStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains basic SDP Binding statistics." ::= { tmnxSdpObjs 5 } sdpBindBaseStatsEntry OBJECT-TYPE SYNTAX SdpBindBaseStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Basic statistics about a specific SDP Binding." INDEX { svcId, sdpBindId } ::= { sdpBindBaseStatsTable 1 } SdpBindBaseStatsEntry ::= SEQUENCE { sdpBindBaseStatsIngressForwardedPackets Counter64, sdpBindBaseStatsIngressDroppedPackets Counter64, sdpBindBaseStatsEgressForwardedPackets Counter64, sdpBindBaseStatsEgressForwardedOctets Counter64, sdpBindBaseStatsCustId TmnxCustId, sdpBindBaseStatsIngFwdOctets Counter64, sdpBindBaseStatsIngDropOctets Counter64 } sdpBindBaseStatsIngressForwardedPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { sdpBindBaseStatsEntry 1 } sdpBindBaseStatsIngressDroppedPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { sdpBindBaseStatsEntry 2 } sdpBindBaseStatsEgressForwardedPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { sdpBindBaseStatsEntry 3 } sdpBindBaseStatsEgressForwardedOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { sdpBindBaseStatsEntry 4 } sdpBindBaseStatsCustId OBJECT-TYPE SYNTAX TmnxCustId MAX-ACCESS read-only STATUS current DESCRIPTION "The Customer ID of the associated service." ::= { sdpBindBaseStatsEntry 5 } sdpBindBaseStatsIngFwdOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { sdpBindBaseStatsEntry 6 } sdpBindBaseStatsIngDropOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { sdpBindBaseStatsEntry 7 } -- ------------------------------------------ -- TLS SDP Bind Table -- ------------------------------------------ sdpBindTlsTable OBJECT-TYPE SYNTAX SEQUENCE OF SdpBindTlsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains TLS spoke SDP Bind information." ::= { tmnxSdpObjs 6 } sdpBindTlsEntry OBJECT-TYPE SYNTAX SdpBindTlsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "TLS specific information about an SDP Bind." INDEX { svcId, sdpBindId } ::= { sdpBindTlsTable 1 } SdpBindTlsEntry ::= SEQUENCE { sdpBindTlsStpAdminStatus TmnxEnabledDisabled, sdpBindTlsStpPriority INTEGER, sdpBindTlsStpPortNum INTEGER, sdpBindTlsStpPathCost INTEGER, sdpBindTlsStpRapidStart TmnxEnabledDisabled, sdpBindTlsStpBpduEncap INTEGER, sdpBindTlsStpPortState TStpPortState, sdpBindTlsStpDesignatedBridge BridgeId, sdpBindTlsStpDesignatedPort Integer32, sdpBindTlsStpForwardTransitions Gauge32, sdpBindTlsStpInConfigBpdus Gauge32, sdpBindTlsStpInTcnBpdus Gauge32, sdpBindTlsStpInBadBpdus Gauge32, sdpBindTlsStpOutConfigBpdus Gauge32, sdpBindTlsStpOutTcnBpdus Gauge32, sdpBindTlsStpOperBpduEncap INTEGER, sdpBindTlsStpVpnId VpnId, sdpBindTlsStpCustId TmnxCustId, sdpBindTlsMacAddressLimit Integer32, sdpBindTlsNumMacAddresses Integer32, sdpBindTlsNumStaticMacAddresses Integer32, sdpBindTlsMacLearning TmnxEnabledDisabled, sdpBindTlsMacAgeing TmnxEnabledDisabled, sdpBindTlsStpOperEdge TruthValue, sdpBindTlsStpAdminPointToPoint INTEGER, sdpBindTlsStpPortRole StpPortRole, sdpBindTlsStpAutoEdge TmnxEnabledDisabled, sdpBindTlsStpOperProtocol StpProtocol, sdpBindTlsStpInRstBpdus Gauge32, sdpBindTlsStpOutRstBpdus Gauge32, sdpBindTlsLimitMacMove TlsLimitMacMove, sdpBindTlsDiscardUnknownSource TmnxEnabledDisabled, sdpBindTlsMvplsPruneState MvplsPruneState, sdpBindTlsMvplsMgmtService TmnxServId, sdpBindTlsMvplsMgmtSdpBndId SdpBindId, sdpBindTlsStpException StpExceptionCondition, sdpBindTlsL2ptTermination TmnxEnabledDisabled, sdpBindTlsBpduTranslation SdpBindTlsBpduTranslation, sdpBindTlsStpRootGuard TruthValue, sdpBindTlsStpInMstBpdus Gauge32, sdpBindTlsStpOutMstBpdus Gauge32, sdpBindTlsStpRxdDesigBridge BridgeId, sdpBindTlsMacMoveNextUpTime Unsigned32, sdpBindTlsMacMoveRateExcdLeft Unsigned32, sdpBindTlsLimitMacMoveLevel TlsLimitMacMoveLevel, sdpBindTlsBpduTransOper INTEGER, sdpBindTlsL2ptProtocols L2ptProtocols, sdpBindTlsIgnoreStandbySig TruthValue, sdpBindTlsBlockOnMeshFail TruthValue } sdpBindTlsStpAdminStatus OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sdpBindTlsStpAdminStatus specifies whether this SDP Bind participates in the TLS's Spanning Tree Protocol." DEFVAL { enabled } ::= { sdpBindTlsEntry 1 } sdpBindTlsStpPriority OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sdpBindTlsStpPriority specifies the value of the port priority field which is contained in the most significant 4 bits of the 16-bit Port ID associated with this SDP Bind. As only the most significant 4 bits of the value are used, the actual value of this object is limited to multiples of 16: e.g. the agent rounds down the value to one of: 0, 16, 32, .. , 224, 240." DEFVAL { 128 } ::= { sdpBindTlsEntry 2 } sdpBindTlsStpPortNum OBJECT-TYPE SYNTAX INTEGER (0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sdpBindTlsStpPortNum specifies the value of the port number field which is contained in the least significant 12 bits of the 16-bit Port ID associated with this SDP Bind. Values in the range 2048..4094 are automatically assigned by the agent when the SDP Bind is created or when the value of this object is set to zero via management. Values in the range 1..2047 can be set via management, to allow this object to have a deterministic value across system reboots." ::= { sdpBindTlsEntry 3 } sdpBindTlsStpPathCost OBJECT-TYPE SYNTAX INTEGER (1..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sdpBindTlsStpPathCost specifies the contribution of this port to the path cost of paths towards the spanning tree root which include this port." DEFVAL { 10 } ::= { sdpBindTlsEntry 4 } sdpBindTlsStpRapidStart OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sdpBindTlsStpRapidStart specifies whether Rapid Start is enabled on this SDP Bind. When the value is 'enabled' the Spanning Tree Protocol state transitions on this SDP Bind are driven by the value of the 'HelloTime', instead of the value of 'ForwardDelay', thus allowing a faster transition into the forwarding state." DEFVAL { disabled } ::= { sdpBindTlsEntry 5 } sdpBindTlsStpBpduEncap OBJECT-TYPE SYNTAX INTEGER { dynamic (1), dot1d (2), pvst (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sdpBindTlsStpBpduEncap specifies the type of encapsulation used on BPDUs sent out and received on this SDP Bind." DEFVAL { dynamic } ::= { sdpBindTlsEntry 6 } sdpBindTlsStpPortState OBJECT-TYPE SYNTAX TStpPortState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindTlsStpPortState indicates the port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the 'broken' state. All possible states are: learning, forwarding, broken, and discarding." ::= { sdpBindTlsEntry 7 } sdpBindTlsStpDesignatedBridge OBJECT-TYPE SYNTAX BridgeId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindTlsStpDesignatedBridge indicates the Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment." ::= { sdpBindTlsEntry 8 } sdpBindTlsStpDesignatedPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindTlsStpDesignatedPort indicates the Port Identifier of the port on the Designated Bridge for this port's segment." ::= { sdpBindTlsEntry 9 } sdpBindTlsStpForwardTransitions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindTlsStpForwardTransitions indicates the number of times this port has transitioned from the Learning state to the Forwarding state." ::= { sdpBindTlsEntry 10 } sdpBindTlsStpInConfigBpdus OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindTlsStpInConfigBpdus indicates the number of Configuration BPDUs received on this SDP Bind." ::= { sdpBindTlsEntry 11 } sdpBindTlsStpInTcnBpdus OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindTlsStpInTcnBpdus indicates the number of Topology Change Notification BPDUs received on this SDP Bind." ::= { sdpBindTlsEntry 12 } sdpBindTlsStpInBadBpdus OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindTlsStpInBadBpdus indicates the number of bad BPDUs received on this SDP Bind." ::= { sdpBindTlsEntry 13 } sdpBindTlsStpOutConfigBpdus OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindTlsStpOutConfigBpdus indicates the number of Configuration BPDUs sent out this SDP Bind." ::= { sdpBindTlsEntry 14 } sdpBindTlsStpOutTcnBpdus OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindTlsStpOutTcnBpdus indicates the number of Topology Change Notification BPDUs sent out this SDP Bind." ::= { sdpBindTlsEntry 15 } sdpBindTlsStpOperBpduEncap OBJECT-TYPE SYNTAX INTEGER { dot1d (2), pvst (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindTlsStpOperBpduEncap indicates the operating encapsulation type used on BPDUs sent out and received on this SDP Bind." ::= { sdpBindTlsEntry 16 } sdpBindTlsStpVpnId OBJECT-TYPE SYNTAX VpnId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindTlsStpVpnId indicates the VPN ID of the associated service." ::= { sdpBindTlsEntry 17 } sdpBindTlsStpCustId OBJECT-TYPE SYNTAX TmnxCustId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindTlsStpCustId indicates the Customer ID of the associated service." ::= { sdpBindTlsEntry 18 } sdpBindTlsMacAddressLimit OBJECT-TYPE SYNTAX Integer32(0..196607) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sdpBindTlsMacAddressLimit specifies the maximum number of learned and static entries allowed in the FDB for this SDP Bind. The value 0 means: no limit for this SDP Bind. The command is valid only for spoke SDPs. When the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisOperMode is not 'c', the maximum value of sdpBindTlsMacAddressLimit is '131071'." DEFVAL { 0 } ::= { sdpBindTlsEntry 19 } sdpBindTlsNumMacAddresses OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindTlsNumMacAddresses indicates the number of MAC addresses currently present in the FDB that belong to this SDP Bind (Both learned and static MAC addresses are counted)." ::= { sdpBindTlsEntry 20 } sdpBindTlsNumStaticMacAddresses OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindTlsNumStaticMacAddresses indicates the number of static MAC addresses currently present in the FDB that belong to this SDP Bind." ::= { sdpBindTlsEntry 21 } sdpBindTlsMacLearning OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sdpBindTlsMacLearning specifies whether the MAC learning process is enabled for this SDP Bind. The value is ignored if MAC learning is disabled on service level." DEFVAL { enabled } ::= { sdpBindTlsEntry 22 } sdpBindTlsMacAgeing OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sdpBindTlsMacAgeing specifies whether the MAC aging process is enabled for this SDP Bind. the value is ignored if MAC aging is disabled on service level." DEFVAL { enabled } ::= { sdpBindTlsEntry 23 } sdpBindTlsStpOperEdge OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindTlsStpOperEdge indicates the operational value of the Edge Port parameter. The object is initialized to the value of sdpBindTlsStpRapidStart and is set FALSE on reception of a BPDU." REFERENCE "IEEE 802.1t clause 14.8.2, 18.3.4" ::= { sdpBindTlsEntry 24 } sdpBindTlsStpAdminPointToPoint OBJECT-TYPE SYNTAX INTEGER { forceTrue (0), forceFalse (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object xx sdpBindTlsStpAdminPointToPoint specifies the administrative point-to-point status of the LAN segment attached to this sdp. A value of 'forceTrue' indicates that this port should always be treated as if it is connected to a point-to-point link. A value of 'forceFalse' indicates that this port should be treated as having a shared media connection." REFERENCE "IEEE 802.1w clause 6.4.3, 6.5, 14.8.2" DEFVAL { forceTrue } ::= { sdpBindTlsEntry 25 } sdpBindTlsStpPortRole OBJECT-TYPE SYNTAX StpPortRole MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindTlsStpPortRole indicates the current role of the sdp as defined by the Rapid Spanning Tree Protocol." ::= { sdpBindTlsEntry 26 } sdpBindTlsStpAutoEdge OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sdpBindTlsStpAutoEdge specifies whether this SDP is enabled for auto-edge detection as defined by Rapid Spanning Tree Protocol." DEFVAL { enabled } ::= { sdpBindTlsEntry 27 } sdpBindTlsStpOperProtocol OBJECT-TYPE SYNTAX StpProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindTlsStpOperProtocol indicates whether stp, rstp or mstp is running on this spoke sdp. If the protocol is not enabled on this spoke-sdp the value notApplicable is returned." ::= { sdpBindTlsEntry 28 } sdpBindTlsStpInRstBpdus OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindTlsStpInRstBpdus indicates the number of Rapid Spanning Tree (Rst) BPDUs received on this SDP." ::= { sdpBindTlsEntry 29 } sdpBindTlsStpOutRstBpdus OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindTlsStpOutRstBpdus indicates the number of Rapid Spanning Tree (Rstp) BPDUs sent out on this SDP." ::= { sdpBindTlsEntry 30 } sdpBindTlsLimitMacMove OBJECT-TYPE SYNTAX TlsLimitMacMove MAX-ACCESS read-write STATUS current DESCRIPTION "When sdpBindTlsLimitMacMove value is set to blockable (1) the agent will monitor the MAC relearn rate on this SDP Bind, and it will block it when the re-learn rate specified by svcTlsMacMoveMaxRate is exceeded. When the value is 'nonBlockable' this SDP binding will not be blocked, and another blockable SDP binding will be blocked instead." DEFVAL { blockable } ::= { sdpBindTlsEntry 31 } sdpBindTlsDiscardUnknownSource OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "With the object sdpBindTlsMacAddressLimit a limit can be configured for the max number of MAC addresses that will be learned on this SDP Bind (only for spoke SDPs). When this limit is reached, packets with unknown source MAC address are forwarded by default. By setting sdpBindTlsDiscardUnknownSource to enabled, packets with unknown source MAC will be dropped in stead." DEFVAL { disabled } ::= { sdpBindTlsEntry 32 } sdpBindTlsMvplsPruneState OBJECT-TYPE SYNTAX MvplsPruneState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindTlsMvplsPruneState indicates the mVPLS prune state of the spoke SDP. The object will be set to notApplicable if the spoke SDP is not managed by a mVPLS. If the SDP is managed the state reflects whether or not it is pruned by the STP instance running in the mVPLS instance." ::= { sdpBindTlsEntry 33 } sdpBindTlsMvplsMgmtService OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindTlsMvplsMgmtService indicates the service Id of the service where the STP instance is running that is managing this spoke SDP. This object is only valid if sdpBindTlsMvplsPruneState is different from notApplicable." ::= { sdpBindTlsEntry 34 } sdpBindTlsMvplsMgmtSdpBndId OBJECT-TYPE SYNTAX SdpBindId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindTlsMvplsMgmtSdpBndId indicates the SDP bind id in the mVPLS instance specified in sdpBindTlsMvplsMgmtService that is controlling this SDP. This object is only valid if sdpBindTlsMvplsPruneState is different from notApplicable." ::= { sdpBindTlsEntry 35 } sdpBindTlsStpException OBJECT-TYPE SYNTAX StpExceptionCondition MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindTlsStpException indicates whether an STP exception condition is present on this Spoke Sdp. - none : no exception condition found. - oneWayCommuniation : The neighbor RSTP peer on this link is not able to detect our presence. - downstreamLoopDetected :A loop is detected on this link." ::= { sdpBindTlsEntry 36 } sdpBindTlsL2ptTermination OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sdpBindTlsL2ptTermination specifies whether received L2 Protocol Tunnel pdu's are terminated on this port or sdp" DEFVAL { disabled } ::= { sdpBindTlsEntry 37 } sdpBindTlsBpduTranslation OBJECT-TYPE SYNTAX SdpBindTlsBpduTranslation MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sdpBindTlsBpduTranslation specifies whether received L2 Protocol Tunnel pdu's are translated before being sent out on this port or sap" DEFVAL { disabled } ::= { sdpBindTlsEntry 38 } sdpBindTlsStpRootGuard OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sdpBindTlsStpRootGuard specifies whether this port is allowed to become STP root port. It corresponds to the parameter 'restrictedRole' in 802.1Q. If set, it can cause lack of spanning tree connectivity." DEFVAL { false } ::= { sdpBindTlsEntry 39 } sdpBindTlsStpInMstBpdus OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindTlsStpInMstBpdus indicates the number of Multiple Spanning Tree (Mst) BPDUs received on this SDP." ::= { sdpBindTlsEntry 40 } sdpBindTlsStpOutMstBpdus OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindTlsStpOutMstBpdus indicates the number of Multiple Spanning Tree (Mst) BPDUs sent out on this SDP." ::= { sdpBindTlsEntry 41 } sdpBindTlsStpRxdDesigBridge OBJECT-TYPE SYNTAX BridgeId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindTlsStpRxdDesigBridge indicates the designated Bridge Identifier in the last BPDU which was received on this SDP." ::= { sdpBindTlsEntry 42 } sdpBindTlsMacMoveNextUpTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindTlsMacMoveNextUpTime counts down the time in seconds until a SDP bind that has been brought down due to exceeding the TLS svcTlsMacMoveMaxRate, sdpBindOperFlags 'relearnLimitExceeded', is automatically brought up again. When this value is 0xffff, the SDP bind will never be automatically brought up. The value is zero when sdpBindOperStatus is 'up'." ::= { sdpBindTlsEntry 43 } sdpBindTlsMacMoveRateExcdLeft OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sapTlsMacMoveRateExcdLeft counts down the number of times this SDP bind can exceed the TLS svcTlsMacMoveMaxRate and still be automatically brought up." ::= { sdpBindTlsEntry 44 } sdpBindTlsLimitMacMoveLevel OBJECT-TYPE SYNTAX TlsLimitMacMoveLevel MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sdpBindTlsLimitMacMoveLevel specifies the hierarchy in which spoke-SDPs are blocked when a MAC-move limit is exceeded. When a MAC is moving among multiple SAPs or spoke-SDPs, the SAP bind or spoke-SDP bind with the lower level is blocked first. (tertiary is the lowest)" DEFVAL { tertiary } ::= { sdpBindTlsEntry 45 } sdpBindTlsBpduTransOper OBJECT-TYPE SYNTAX INTEGER { undefined (1), disabled (2), pvst (3), stp (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindTlsBpduTransOper indicates the operational BPDU encapsulation used for BPDU translated frames." ::= { sdpBindTlsEntry 46 } sdpBindTlsL2ptProtocols OBJECT-TYPE SYNTAX L2ptProtocols MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sdpBindTlsL2ptTermination specifies which L2 Protocol Tunnel pdu's are terminated on this port or sdp" DEFVAL { { stp } } ::= { sdpBindTlsEntry 47 } sdpBindTlsIgnoreStandbySig OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sdpBindTlsIgnoreStandbySig specifies whether the local internal tasks will take into account the 'pseudo-wire forwarding standby' bit received from the LDP peer which is normally ignored. When set to 'true', this bit is not considered in the internal tasks. A similar object svcEndPointIgnoreStandbySig is present at the endpoint level. If this spoke-SDP is part of that explicit endpoint, this object will be set to the value of svcEndPointIgnoreStandbySig and its value will not allowed to be changed. This spoke-SDP can be made part of an explicit-endpoint only if the setting of this object is not conflicting with the setting of svcEndPointIgnoreStandbySig object." DEFVAL { false } ::= { sdpBindTlsEntry 48 } sdpBindTlsBlockOnMeshFail OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sdpBindTlsBlockOnMeshFail specifies that the operational status of this spoke SDP will consider operational status of associated mesh SDPs in this service. If there are no mesh SDPs in the service, value of this object is ignored. When this object is set to 'true', then the operational status of this spoke SDP will be 'down' until the operational status of atleast one mesh SDP in this service is 'up'. When set to 'false', the operational status of this spoke SDP does not consider the operational status of any mesh SDPs in the service." DEFVAL { false } ::= { sdpBindTlsEntry 49 } -- ------------------------------------------ -- TLS Mesh SDP Bind Table -- ------------------------------------------ sdpBindMeshTlsTable OBJECT-TYPE SYNTAX SEQUENCE OF SdpBindMeshTlsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains TLS Mesh SDP Bind information." ::= { tmnxSdpObjs 7 } sdpBindMeshTlsEntry OBJECT-TYPE SYNTAX SdpBindMeshTlsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "TLS specific information about an Mesh SDP Bind." INDEX { svcId, sdpBindId } ::= { sdpBindMeshTlsTable 1 } SdpBindMeshTlsEntry ::= SEQUENCE { sdpBindMeshTlsPortState TStpPortState, sdpBindMeshTlsHoldDownTimer INTEGER, sdpBindMeshTlsTransitionState INTEGER, sdpBindMeshTlsNotInMstRegion TruthValue } sdpBindMeshTlsPortState OBJECT-TYPE SYNTAX TStpPortState MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the actual state of the Mesh SDP. If the sdp is operationally down, the port will be in the 'disabled' state. If the sdp is operationally up, the state will be 'forwarding' unless the hold-down timer is active in which case the state will be 'discarding'." ::= { sdpBindMeshTlsEntry 1 } sdpBindMeshTlsHoldDownTimer OBJECT-TYPE SYNTAX INTEGER { not-active (1), active (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "When the hold-down timer is active, all traffic coming from this mesh sdp will be blocked. This timer will be activated for any of the following cases: 1. when a mesh SDP becomes operational; 2. when a 'disputed' BPDU is received over this mesh sdp; This is typically a symptom of one way communication (the peer at the other side of the mesh sdp does not receive our BPDUs). 3. when a MSTP BPDU from outside the region is received over this mesh SDP." ::= { sdpBindMeshTlsEntry 2 } sdpBindMeshTlsTransitionState OBJECT-TYPE SYNTAX INTEGER { not-applicable (1), waiting-for-agreement (2), agreement-received (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether we already received an agreement from the peer connected via this mesh sdp. RSTP expects an agreement from every peer after sending a proposal over the VCP when it wants to transition the latter to the forwarding state. This object is only relevant when the role of the VCP is 'designated'. Not receiving an agreement is typically caused by an improperly configured sdp or by a non rstp enabled peer." ::= { sdpBindMeshTlsEntry 3 } sdpBindMeshTlsNotInMstRegion OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object sdpBindMeshTlsNotInMstRegion indicates whether we received a BPDU from another MST-region on this mesh SDP. If set to 'true' then the object sdpBindMeshTlsHoldDownTimer will have the value 'active'. It is up to the operator to make sure bridges connected via mesh SDPs are in the same MST-region. If not the mesh will NOT become operational." ::= { sdpBindMeshTlsEntry 4 } -- ------------------------------------ -- APIPE SDP Bind Table -- ------------------------------------ sdpBindApipeTable OBJECT-TYPE SYNTAX SEQUENCE OF SdpBindApipeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sdpBindApipeTable has an entry for each apipe sdpBind configured on this system." ::= { tmnxSdpObjs 8 } sdpBindApipeEntry OBJECT-TYPE SYNTAX SdpBindApipeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a particular sdpBind related to a particular Apipe service entry. Entries are created/deleted by the user." INDEX { svcId, sdpBindId } ::= { sdpBindApipeTable 1 } SdpBindApipeEntry ::= SEQUENCE { sdpBindApipeAdminConcatCellCount Integer32, sdpBindApipeSigConcatCellCount Integer32, sdpBindApipeOperConcatCellCount Integer32, sdpBindApipeConcatMaxDelay Integer32, sdpBindApipeConcatCellClp TruthValue, sdpBindApipeConcatCellAal5Fr TruthValue } sdpBindApipeAdminConcatCellCount OBJECT-TYPE SYNTAX Integer32 (1..128) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sdpBindApipeAdminConcatCellCount specifies the maximum number of ATM cells to accumulate into an MPLS packet. The remote peer will also signal the maximum number of concatenated cells it is willing to accept in an MPLS packet. When the lesser of (the configured value and the signaled value) number of cells is reached, the MPLS packet is queued for transmission onto the pseudowire." DEFVAL { 1 } ::= { sdpBindApipeEntry 1 } sdpBindApipeSigConcatCellCount OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindApipeSigConcatCellCount indicates the maximum number of concatenated ATM cells the remote peer is willing to accept. If there is no remote peer, or if the label mapping has not been received, this object will be zero (0)." ::= { sdpBindApipeEntry 2 } sdpBindApipeOperConcatCellCount OBJECT-TYPE SYNTAX Integer32 (1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindApipeOperConcatCellCount indicates the maximum number of concatenated ATM cells that will be sent on this SDP binding." ::= { sdpBindApipeEntry 3 } sdpBindApipeConcatMaxDelay OBJECT-TYPE SYNTAX Integer32 (1..400) UNITS "hundreds of microseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sdpBindApipeConcatMaxDelay object specifies the maximum amount of time to wait while performing ATM cell concatenation into an MPLS packet before transmitting the MPLS packet. This places an upper bound on the amount of delay introduced by the concatenation process. When this amount of time is reached from when the first ATM cell for this MPLS packet was received, the MPLS packet is queued for transmission onto the pseudowire." DEFVAL { 400 } ::= { sdpBindApipeEntry 4 } sdpBindApipeConcatCellClp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sdpBindApipeConcatCellClp specifies whether a CLP change should be used as an indication to complete the cell concatenation operation. When the value is 'true', CLP is used to indicate that cell concatenation should be completed." DEFVAL { false } ::= { sdpBindApipeEntry 5 } sdpBindApipeConcatCellAal5Fr OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sdpBindApipeConcatCellAal5Fr specifies whether the AAL5 EOP (end of packet) should be used as an indication to complete the cell concatenation operation. When the value is 'true', EOP is used to indicate that cell concatenation should be completed." DEFVAL { false } ::= { sdpBindApipeEntry 6 } -- ------------------------------------ -- SDP Bind DHCP Information Table -- ------------------------------------ sdpBindDhcpInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SdpBindDhcpInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains DHCP information related to a SDP Bind. A row will exist in this table for each spoke or mesh SDP in a Tls Service. Rows are created and deleted automatically by the system." ::= { tmnxSdpObjs 9 } sdpBindDhcpInfoEntry OBJECT-TYPE SYNTAX SdpBindDhcpInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "DHCP specific information about an SDP Bind." INDEX { svcId, sdpBindId } ::= { sdpBindDhcpInfoTable 1 } SdpBindDhcpInfoEntry ::= SEQUENCE { sdpBindDhcpDescription ServObjDesc, sdpBindDhcpSnoop TmnxEnabledDisabled } sdpBindDhcpDescription OBJECT-TYPE SYNTAX ServObjDesc MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sdpBindDhcpDescription specifies a user provided description for DHCP on this Sdp Bind." DEFVAL { ''H } ::= { sdpBindDhcpInfoEntry 1 } sdpBindDhcpSnoop OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sdpBindDhcpSnoop specifies whether or not DHCP snooping is enabled on the Sdp Bind." DEFVAL { disabled } ::= { sdpBindDhcpInfoEntry 2 } -- ------------------------------------ -- SDP Bind DHCP Stats Table -- ------------------------------------ sdpBindDhcpStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SdpBindDhcpStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "sdpBindDhcpStatsTable contains DHCP statistics related to a TLS SDP Bind. A row will exist in this table for each spoke or mesh SDP in a Tls Service. Rows are created and deleted automatically by the system." ::= { tmnxSdpObjs 10 } sdpBindDhcpStatsEntry OBJECT-TYPE SYNTAX SdpBindDhcpStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "DHCP statistics for a TLS spoke SDP or mesh SDP." INDEX { svcId, sdpBindId } ::= { sdpBindDhcpStatsTable 1 } SdpBindDhcpStatsEntry ::= SEQUENCE { sdpBindDhcpStatsClntSnoopdPckts Counter32, sdpBindDhcpStatsSrvrSnoopdPckts Counter32, sdpBindDhcpStatsClntForwdPckts Counter32, sdpBindDhcpStatsSrvrForwdPckts Counter32, sdpBindDhcpStatsClntDropdPckts Counter32, sdpBindDhcpStatsSrvrDropdPckts Counter32, sdpBindDhcpStatsClntProxRadPckts Counter32, sdpBindDhcpStatsClntProxLSPckts Counter32, sdpBindDhcpStatsGenReleasePckts Counter32, sdpBindDhcpStatsGenForceRenPckts Counter32 } sdpBindDhcpStatsClntSnoopdPckts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindDhcpStatsClntSnoopdPckts indicates the number of DHCP client packets that have been snooped on this SDP bind." ::= { sdpBindDhcpStatsEntry 1 } sdpBindDhcpStatsSrvrSnoopdPckts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindDhcpStatsSrvrSnoopdPckts indicates the number of DHCP server packets that have been snooped on this SDP bind." ::= { sdpBindDhcpStatsEntry 2 } sdpBindDhcpStatsClntForwdPckts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindDhcpStatsClntForwdPckts indicates the number of DHCP client packets that have been forwarded on this SDP bind." ::= { sdpBindDhcpStatsEntry 3 } sdpBindDhcpStatsSrvrForwdPckts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindDhcpStatsSrvrForwdPckts indicates the number of DHCP server packets that have been forwarded on this SDP bind." ::= { sdpBindDhcpStatsEntry 4 } sdpBindDhcpStatsClntDropdPckts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindDhcpStatsClntDropdPckts indicates the number of DHCP client packets that have been dropped on this SDP bind." ::= { sdpBindDhcpStatsEntry 5 } sdpBindDhcpStatsSrvrDropdPckts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindDhcpStatsSrvrDropdPckts indicates the number of DHCP server packets that have been dropped on this SDP bind." ::= { sdpBindDhcpStatsEntry 6 } sdpBindDhcpStatsClntProxRadPckts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindDhcpStatsClntProxRadPckts indicates the number of DHCP client packets that have been proxied on this SDP bind based on data received from a RADIUS server." ::= { sdpBindDhcpStatsEntry 7 } sdpBindDhcpStatsClntProxLSPckts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindDhcpStatsClntProxLSPckts indicates the number of DHCP client packets that have been proxied on this SDP bind based on a lease state. The lease itself can have been obtained from a DHCP or RADIUS server. This is the so called lease split functionality." ::= { sdpBindDhcpStatsEntry 8 } sdpBindDhcpStatsGenReleasePckts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindDhcpStatsGenReleasePckts indicates the number of DHCP RELEASE messages spoofed on this SDP bind to the DHCP server." ::= { sdpBindDhcpStatsEntry 9 } sdpBindDhcpStatsGenForceRenPckts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object sdpBindDhcpStatsGenForceRenPckts indicates the number of DHCP FORCERENEW messages spoofed on this SDP bind to the DHCP clients." ::= { sdpBindDhcpStatsEntry 10 } -- ------------------------------------ -- IPIPE SDP Bind Table -- ------------------------------------ sdpBindIpipeTable OBJECT-TYPE SYNTAX SEQUENCE OF SdpBindIpipeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sdpBindIpipeTable has an entry for each IPIPE sdpBind configured on this system." ::= { tmnxSdpObjs 11 } sdpBindIpipeEntry OBJECT-TYPE SYNTAX SdpBindIpipeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a particular sdpBind related to a particular IPIPE service entry. Entries are created/deleted by the user." INDEX { svcId, sdpBindId } ::= { sdpBindIpipeTable 1 } SdpBindIpipeEntry ::= SEQUENCE { sdpBindIpipeCeInetAddressType InetAddressType, sdpBindIpipeCeInetAddress InetAddress } sdpBindIpipeCeInetAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object sdpBindIpipeCeInetAddressType specifies the addresstype of the IP address of the CE device reachable throught this IPIPE SDP binding." ::= { sdpBindIpipeEntry 1 } sdpBindIpipeCeInetAddress OBJECT-TYPE SYNTAX InetAddress (SIZE(0|4)) MAX-ACCESS read-write STATUS current DESCRIPTION "The type of this address is determined by the value of the sdpBindIpipeCeInetAddressType object. This object specifies the IPv4 address of the CE device reachable through this SDP binding." ::= { sdpBindIpipeEntry 2 } -- -------------------------------------------- -- SDP Egress forwarding-class mapping table -- -------------------------------------------- sdpFCMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF SdpFCMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sdpFCMappingTable has an entry for each FC mapping on an SDP configured on this system." ::= { tmnxSdpObjs 12 } sdpFCMappingEntry OBJECT-TYPE SYNTAX SdpFCMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a particular FC to LSP ID mapping on an SDP. Entries are created/deleted by the user." INDEX { sdpId, sdpFCMappingFCName } ::= { sdpFCMappingTable 1 } SdpFCMappingEntry ::= SEQUENCE { sdpFCMappingFCName TNamedItem, sdpFCMappingRowStatus RowStatus, sdpFCMappingLspId TmnxVRtrMplsLspID } sdpFCMappingFCName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sdpFCMappingFCName specifies the forwarding class for which this mapping is defined, in the SDP indexed by 'sdpId'." ::= { sdpFCMappingEntry 1 } sdpFCMappingRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sdpFCMappingRowStatus is used for the creation and deletion of forwarding class to LSP mappings." ::= { sdpFCMappingEntry 2 } sdpFCMappingLspId OBJECT-TYPE SYNTAX TmnxVRtrMplsLspID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sdpFCMappingLspId specifies the LSP ID that traffic corresponding to the class specified in sdpFCMappingFCName will be forwarded on. This object MUST be specified at row creation time." ::= { sdpFCMappingEntry 3 } -- ------------------------------------ -- CPIPE SDP Bind Table -- ------------------------------------ sdpBindCpipeTable OBJECT-TYPE SYNTAX SEQUENCE OF SdpBindCpipeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sdpBindCpipeTable has an entry for each cpipe sdpBind configured on this system." ::= { tmnxSdpObjs 15 } sdpBindCpipeEntry OBJECT-TYPE SYNTAX SdpBindCpipeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a particular sdpBind related to a particular Cpipe service entry. Entries are created/deleted by the user." INDEX { svcId, sdpBindId } ::= { sdpBindCpipeTable 1 } SdpBindCpipeEntry ::= SEQUENCE { sdpBindCpipeLocalPayloadSize Unsigned32, sdpBindCpipePeerPayloadSize Unsigned32, sdpBindCpipeLocalBitrate Unsigned32, sdpBindCpipePeerBitrate Unsigned32, sdpBindCpipeLocalSigPkts TdmOptionsSigPkts, sdpBindCpipePeerSigPkts TdmOptionsSigPkts, sdpBindCpipeLocalCasTrunkFraming TdmOptionsCasTrunkFraming, sdpBindCpipePeerCasTrunkFraming TdmOptionsCasTrunkFraming, sdpBindCpipeLocalUseRtpHeader TruthValue, sdpBindCpipePeerUseRtpHeader TruthValue, sdpBindCpipeLocalDifferential TruthValue, sdpBindCpipePeerDifferential TruthValue, sdpBindCpipeLocalTimestampFreq Unsigned32, sdpBindCpipePeerTimestampFreq Unsigned32 } sdpBindCpipeLocalPayloadSize OBJECT-TYPE SYNTAX Unsigned32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the local payload size (in bytes)." ::= { sdpBindCpipeEntry 1 } sdpBindCpipePeerPayloadSize OBJECT-TYPE SYNTAX Unsigned32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the remote payload size (in bytes). If there is no remote peer, or if the label mapping has not been received, or if this value has not been received from the remote peer then this object will be zero (0)." ::= { sdpBindCpipeEntry 2 } sdpBindCpipeLocalBitrate OBJECT-TYPE SYNTAX Unsigned32 UNITS "64 Kbits/s" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the local bit-rate in multiples of 64 Kbit/s." ::= { sdpBindCpipeEntry 3 } sdpBindCpipePeerBitrate OBJECT-TYPE SYNTAX Unsigned32 UNITS "64 Kbits/s" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the remote bit-rate in multiples of 64 Kbit/s. If there is no remote peer, or if the label mapping has not been received, or if this value has not been received from the remote peer then this object will be zero (0)." ::= { sdpBindCpipeEntry 4 } sdpBindCpipeLocalSigPkts OBJECT-TYPE SYNTAX TdmOptionsSigPkts MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the local CE application signalling packets mode." ::= { sdpBindCpipeEntry 5 } sdpBindCpipePeerSigPkts OBJECT-TYPE SYNTAX TdmOptionsSigPkts MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the remote CE application signalling packets mode. If there is no remote peer, or if the label mapping has not been received, or if the remote peer does not support signalling packets then this object will be zero (0)." ::= { sdpBindCpipeEntry 6 } sdpBindCpipeLocalCasTrunkFraming OBJECT-TYPE SYNTAX TdmOptionsCasTrunkFraming MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the local CAS trunk framing mode." ::= { sdpBindCpipeEntry 7 } sdpBindCpipePeerCasTrunkFraming OBJECT-TYPE SYNTAX TdmOptionsCasTrunkFraming MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the remote CAS trunk framing mode. If there is no remote peer, or if the label mapping has not been received, or if the remote peer does not support CAS trunk framing then this object will be zero (0)." ::= { sdpBindCpipeEntry 8 } sdpBindCpipeLocalUseRtpHeader OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether a RTP header is used when packets are transmitted to the remote peer, and the local peer expects a RTP header when packets are received from the remote peer." ::= { sdpBindCpipeEntry 9 } sdpBindCpipePeerUseRtpHeader OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether a RTP header is used when packets are transmitted by the remote peer, and the remote peer expects a RTP header when packets are received from the local peer. If there is no remote peer, or if the label mapping has not been received, or if the remote peer does not support RTP headers then this object will be 'false'." ::= { sdpBindCpipeEntry 10 } sdpBindCpipeLocalDifferential OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether differential timestamp mode is used in the RTP header when packets are transmitted to the remote peer, and the local peer expects differential timestamps in the RTP header when packets are received from the remote peer." ::= { sdpBindCpipeEntry 11 } sdpBindCpipePeerDifferential OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether differential timestamp mode is used in the RTP header when packets are transmitted by the remote peer, and the remote peer expects differential timestamps in the RTP header when packets are received from the local peer. If there is no remote peer, or if the label mapping has not been received, or if the remote peer does not support differential timestamp mode then this object will be 'false'." ::= { sdpBindCpipeEntry 12 } sdpBindCpipeLocalTimestampFreq OBJECT-TYPE SYNTAX Unsigned32 UNITS "8 KHz" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the timestamp frequency used in the RTP header when packets are transmitted to the remote peer, and the local peer expects same timestamp frequency in the RTP header when packets are received from the remote peer. This value is in multiples of 8 KHz." ::= { sdpBindCpipeEntry 13 } sdpBindCpipePeerTimestampFreq OBJECT-TYPE SYNTAX Unsigned32 UNITS "8 KHz" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the timestamp frequency used in the RTP header when packets are transmitted by the remote peer, and the remote peer expects the same timestamp frequency in the RTP header when packets are received from the local peer. If there is no remote peer, or if the label mapping has not been received, or if the remote peer does not support support RTP headers then this object will be zero (0). This value is in multiples of 8 KHz." ::= { sdpBindCpipeEntry 14 } -- -------------------------------------------- -- SDP Bind TLS Egress MFIB Allowed MDA Destinations Table -- -------------------------------------------- sdpBindTlsMfibAllowedMdaTable OBJECT-TYPE SYNTAX SEQUENCE OF SdpBindTlsMfibAllowedMdaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sdpBindTlsMfibAllowedMdaTable has an entry for each MFIB allowed MDA destination for an SDP Binding configured in the system." ::= { tmnxSdpObjs 13 } sdpBindTlsMfibAllowedMdaEntry OBJECT-TYPE SYNTAX SdpBindTlsMfibAllowedMdaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents an MFIB allowed MDA destination for an SDP Binding configured in the system. Entries can be created and deleted via SNMP SET operations on the object sdpBindTlsMfibMdaRowStatus." INDEX { svcId, sdpBindId, tmnxChassisIndex, tmnxCardSlotNum, tmnxMDASlotNum } ::= { sdpBindTlsMfibAllowedMdaTable 1 } SdpBindTlsMfibAllowedMdaEntry ::= SEQUENCE { sdpBindTlsMfibMdaRowStatus RowStatus } sdpBindTlsMfibMdaRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of sdpBindTlsMfibMdaRowStatus controls the creation and deletion of rows in this table." ::= { sdpBindTlsMfibAllowedMdaEntry 1 } -- ------------------------------------------ -- SDP Bind TLS L2PT Statistics Table -- ------------------------------------------ sdpBindTlsL2ptStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SdpBindTlsL2ptStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains TLS spoke SDP Bind Layer 2 Protocol Tunneling Statistics. This table complements the sdpBindTlsTable. Rows in this table are created and deleted automatically by the system." ::= { tmnxSdpObjs 16 } sdpBindTlsL2ptStatsEntry OBJECT-TYPE SYNTAX SdpBindTlsL2ptStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "TLS specific information about an SDP Bind." INDEX { svcId, sdpBindId } ::= { sdpBindTlsL2ptStatsTable 1 } SdpBindTlsL2ptStatsEntry ::= SEQUENCE { sdpBindTlsL2ptStatsLastClearedTime TimeStamp, sdpBindTlsL2ptStatsL2ptEncapStpConfigBpdusRx Counter32, sdpBindTlsL2ptStatsL2ptEncapStpConfigBpdusTx Counter32, sdpBindTlsL2ptStatsL2ptEncapStpRstBpdusRx Counter32, sdpBindTlsL2ptStatsL2ptEncapStpRstBpdusTx Counter32, sdpBindTlsL2ptStatsL2ptEncapStpTcnBpdusRx Counter32, sdpBindTlsL2ptStatsL2ptEncapStpTcnBpdusTx Counter32, sdpBindTlsL2ptStatsL2ptEncapPvstConfigBpdusRx Counter32, sdpBindTlsL2ptStatsL2ptEncapPvstConfigBpdusTx Counter32, sdpBindTlsL2ptStatsL2ptEncapPvstRstBpdusRx Counter32, sdpBindTlsL2ptStatsL2ptEncapPvstRstBpdusTx Counter32, sdpBindTlsL2ptStatsL2ptEncapPvstTcnBpdusRx Counter32, sdpBindTlsL2ptStatsL2ptEncapPvstTcnBpdusTx Counter32, sdpBindTlsL2ptStatsStpConfigBpdusRx Counter32, sdpBindTlsL2ptStatsStpConfigBpdusTx Counter32, sdpBindTlsL2ptStatsStpRstBpdusRx Counter32, sdpBindTlsL2ptStatsStpRstBpdusTx Counter32, sdpBindTlsL2ptStatsStpTcnBpdusRx Counter32, sdpBindTlsL2ptStatsStpTcnBpdusTx Counter32, sdpBindTlsL2ptStatsPvstConfigBpdusRx Counter32, sdpBindTlsL2ptStatsPvstConfigBpdusTx Counter32, sdpBindTlsL2ptStatsPvstRstBpdusRx Counter32, sdpBindTlsL2ptStatsPvstRstBpdusTx Counter32, sdpBindTlsL2ptStatsPvstTcnBpdusRx Counter32, sdpBindTlsL2ptStatsPvstTcnBpdusTx Counter32, sdpBindTlsL2ptStatsOtherBpdusRx Counter32, sdpBindTlsL2ptStatsOtherBpdusTx Counter32, sdpBindTlsL2ptStatsOtherL2ptBpdusRx Counter32, sdpBindTlsL2ptStatsOtherL2ptBpdusTx Counter32, sdpBindTlsL2ptStatsOtherInvalidBpdusRx Counter32, sdpBindTlsL2ptStatsOtherInvalidBpdusTx Counter32, sdpBindTlsL2ptStatsL2ptEncapCdpBpdusRx Counter32, sdpBindTlsL2ptStatsL2ptEncapCdpBpdusTx Counter32, sdpBindTlsL2ptStatsL2ptEncapVtpBpdusRx Counter32, sdpBindTlsL2ptStatsL2ptEncapVtpBpdusTx Counter32, sdpBindTlsL2ptStatsL2ptEncapDtpBpdusRx Counter32, sdpBindTlsL2ptStatsL2ptEncapDtpBpdusTx Counter32, sdpBindTlsL2ptStatsL2ptEncapPagpBpdusRx Counter32, sdpBindTlsL2ptStatsL2ptEncapPagpBpdusTx Counter32, sdpBindTlsL2ptStatsL2ptEncapUdldBpdusRx Counter32, sdpBindTlsL2ptStatsL2ptEncapUdldBpdusTx Counter32, sdpBindTlsL2ptStatsCdpBpdusRx Counter32, sdpBindTlsL2ptStatsCdpBpdusTx Counter32, sdpBindTlsL2ptStatsVtpBpdusRx Counter32, sdpBindTlsL2ptStatsVtpBpdusTx Counter32, sdpBindTlsL2ptStatsDtpBpdusRx Counter32, sdpBindTlsL2ptStatsDtpBpdusTx Counter32, sdpBindTlsL2ptStatsPagpBpdusRx Counter32, sdpBindTlsL2ptStatsPagpBpdusTx Counter32, sdpBindTlsL2ptStatsUdldBpdusRx Counter32, sdpBindTlsL2ptStatsUdldBpdusTx Counter32 } sdpBindTlsL2ptStatsLastClearedTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsLastClearedTime indicates the last time that these stats were cleared. The value zero indicates that they have not been cleared yet." ::= { sdpBindTlsL2ptStatsEntry 1 } sdpBindTlsL2ptStatsL2ptEncapStpConfigBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapStpConfigBpdusRx indicates the number of L2PT encapsulated STP config bpdus received on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 2 } sdpBindTlsL2ptStatsL2ptEncapStpConfigBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapStpConfigBpdusTx indicates the number of L2PT encapsulated STP config bpdus transmitted on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 3 } sdpBindTlsL2ptStatsL2ptEncapStpRstBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapStpRstBpdusRx indicates the number of L2PT encapsulated STP rst bpdus received on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 4 } sdpBindTlsL2ptStatsL2ptEncapStpRstBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapStpRstBpdusTx indicates the number of L2PT encapsulated STP rst bpdus transmitted on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 5 } sdpBindTlsL2ptStatsL2ptEncapStpTcnBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapStpTcnBpdusRx indicates the number of L2PT encapsulated STP tcn bpdus received on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 6 } sdpBindTlsL2ptStatsL2ptEncapStpTcnBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapStpTcnBpdusTx indicates the number of L2PT encapsulated STP tcn bpdus transmitted on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 7 } sdpBindTlsL2ptStatsL2ptEncapPvstConfigBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapPvstConfigBpdusRx indicates the number of L2PT encapsulated PVST config bpdus received on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 8 } sdpBindTlsL2ptStatsL2ptEncapPvstConfigBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapPvstConfigBpdusTx indicates the number of L2PT encapsulated PVST config bpdus transmitted on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 9 } sdpBindTlsL2ptStatsL2ptEncapPvstRstBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapPvstRstBpdusRx indicates the number of L2PT encapsulated PVST rst bpdus received on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 10 } sdpBindTlsL2ptStatsL2ptEncapPvstRstBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapPvstRstBpdusTx indicates the number of L2PT encapsulated PVST rst bpdus transmitted on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 11 } sdpBindTlsL2ptStatsL2ptEncapPvstTcnBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapPvstTcnBpdusRx indicates the number of L2PT encapsulated PVST tcn bpdus received on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 12 } sdpBindTlsL2ptStatsL2ptEncapPvstTcnBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapPvstTcnBpdusTx indicates the number of L2PT encapsulated PVST tcn bpdus transmitted on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 13 } sdpBindTlsL2ptStatsStpConfigBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsStpConfigBpdusRx indicates the number of STP config bpdus received on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 14 } sdpBindTlsL2ptStatsStpConfigBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsStpConfigBpdusTx indicates the number of STP config bpdus transmitted on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 15 } sdpBindTlsL2ptStatsStpRstBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsStpRstBpdusRx indicates the number of STP rst bpdus received on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 16 } sdpBindTlsL2ptStatsStpRstBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsStpRstBpdusTx indicates the number of STP rst bpdus transmitted on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 17 } sdpBindTlsL2ptStatsStpTcnBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsStpTcnBpdusRx indicates the number of STP tcn bpdus received on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 18 } sdpBindTlsL2ptStatsStpTcnBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsStpTcnBpdusTx indicates the number of STP tcn bpdus transmitted on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 19 } sdpBindTlsL2ptStatsPvstConfigBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsPvstConfigBpdusRx indicates the number of PVST config bpdus received on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 20 } sdpBindTlsL2ptStatsPvstConfigBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsPvstConfigBpdusTx indicates the number of PVST config bpdus transmitted on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 21 } sdpBindTlsL2ptStatsPvstRstBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsPvstRstBpdusRx indicates the number of PVST rst bpdus received on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 22 } sdpBindTlsL2ptStatsPvstRstBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsPvstRstBpdusTx indicates the number of PVST rst bpdus transmitted on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 23 } sdpBindTlsL2ptStatsPvstTcnBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsPvstTcnBpdusRx indicates the number of PVST tcn bpdus received on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 24 } sdpBindTlsL2ptStatsPvstTcnBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsPvstTcnBpdusTx indicates the number of PVST tcn bpdus transmitted on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 25 } sdpBindTlsL2ptStatsOtherBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsOtherBpdusRx indicates the number of other bpdus received on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 26 } sdpBindTlsL2ptStatsOtherBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsOtherBpdusTx indicates the number of other bpdus transmitted on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 27 } sdpBindTlsL2ptStatsOtherL2ptBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsOtherL2ptBpdusRx indicates the number of other L2PT bpdus received on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 28 } sdpBindTlsL2ptStatsOtherL2ptBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsOtherL2ptBpdusTx indicates the number of other L2PT bpdus transmitted on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 29 } sdpBindTlsL2ptStatsOtherInvalidBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsOtherInvalidBpdusRx indicates the number of other invalid bpdus received on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 30 } sdpBindTlsL2ptStatsOtherInvalidBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsOtherInvalidBpdusTx indicates the number of other invalid bpdus transmitted on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 31 } sdpBindTlsL2ptStatsL2ptEncapCdpBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapCdpBpdusRx indicates the number of L2PT encapsulated CDP bpdus received on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 32 } sdpBindTlsL2ptStatsL2ptEncapCdpBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapCdpBpdusTx indicates the number of L2PT encapsulated CDP bpdus transmitted on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 33 } sdpBindTlsL2ptStatsL2ptEncapVtpBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapVtpBpdusRx indicates the number of L2PT encapsulated VTP bpdus received on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 34 } sdpBindTlsL2ptStatsL2ptEncapVtpBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapVtpBpdusTx indicates the number of L2PT encapsulated VTP bpdus transmitted on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 35 } sdpBindTlsL2ptStatsL2ptEncapDtpBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapDtpBpdusRx indicates the number of L2PT encapsulated DTP bpdus received on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 36 } sdpBindTlsL2ptStatsL2ptEncapDtpBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapDtpBpdusTx indicates the number of L2PT encapsulated DTP bpdus transmitted on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 37 } sdpBindTlsL2ptStatsL2ptEncapPagpBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapPagpBpdusRx indicates the number of L2PT encapsulated PAGP bpdus received on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 38 } sdpBindTlsL2ptStatsL2ptEncapPagpBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapPagpBpdusTx indicates the number of L2PT encapsulated PAGP bpdus transmitted on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 39 } sdpBindTlsL2ptStatsL2ptEncapUdldBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapUdldBpdusRx indicates the number of L2PT encapsulated UDLD bpdus received on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 40 } sdpBindTlsL2ptStatsL2ptEncapUdldBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsL2ptEncapUdldBpdusTx indicates the number of L2PT encapsulated UDLD bpdus transmitted on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 41 } sdpBindTlsL2ptStatsCdpBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsCdpBpdusRx indicates the number of CDP bpdus received on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 42 } sdpBindTlsL2ptStatsCdpBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsCdpBpdusTx indicates the number of CDP bpdus transmitted on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 43 } sdpBindTlsL2ptStatsVtpBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsVtpBpdusRx indicates the number of VTP bpdus received on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 44 } sdpBindTlsL2ptStatsVtpBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsVtpBpdusTx indicates the number of VTP bpdus transmitted on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 45 } sdpBindTlsL2ptStatsDtpBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsDtpBpdusRx indicates the number of DTP bpdus received on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 46 } sdpBindTlsL2ptStatsDtpBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsDtpBpdusTx indicates the number of DTP bpdus transmitted on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 47 } sdpBindTlsL2ptStatsPagpBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsPagpBpdusRx indicates the number of PAGP bpdus received on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 48 } sdpBindTlsL2ptStatsPagpBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsPagpBpdusTx indicates the number of PAGP bpdus transmitted on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 49 } sdpBindTlsL2ptStatsUdldBpdusRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsUdldBpdusRx indicates the number of UDLD bpdus received on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 50 } sdpBindTlsL2ptStatsUdldBpdusTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsL2ptStatsUdldBpdusTx indicates the number of UDLD bpdus transmitted on this spoke SDP." ::= { sdpBindTlsL2ptStatsEntry 51 } -- ------------------------- -- PW Template Table -- ------------------------- pwTemplateTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of pwTemplateTableLastChanged indicates the sysUpTime at the time of the last modification of pwTemplateTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxSdpObjs 17 } pwTemplateTable OBJECT-TYPE SYNTAX SEQUENCE OF PwTemplateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains entries for pseudowire (PW) templates specifying SDP auto-binding." ::= { tmnxSdpObjs 18 } pwTemplateEntry OBJECT-TYPE SYNTAX PwTemplateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a specific PW template." INDEX { pwTemplateId } ::= { pwTemplateTable 1 } PwTemplateEntry ::= SEQUENCE { pwTemplateId PWTemplateId, pwTemplateRowStatus RowStatus, pwTemplateLastChanged TimeStamp, pwTemplateUseProvisionedSdp TruthValue, pwTemplateVcType SdpBindVcType, pwTemplateAccountingPolicyId Unsigned32, pwTemplateCollectAcctStats TruthValue, pwTemplateMacLearning TmnxEnabledDisabled, pwTemplateMacAgeing TmnxEnabledDisabled, pwTemplateDiscardUnknownSource TmnxEnabledDisabled, pwTemplateLimitMacMove TlsLimitMacMove, pwTemplateMacPinning TmnxEnabledDisabled, pwTemplateVlanVcTag Unsigned32, pwTemplateMacAddressLimit Unsigned32, pwTemplateShgName TNamedItemOrEmpty, pwTemplateShgDescription TItemDescription, pwTemplateShgRestProtSrcMac TruthValue, pwTemplateShgRestUnprotDstMac TruthValue, pwTemplateEgressMacFilterId TFilterID, pwTemplateEgressIpFilterId TFilterID, pwTemplateEgressIpv6FilterId TFilterID, pwTemplateIngressMacFilterId TFilterID, pwTemplateIngressIpFilterId TFilterID, pwTemplateIngressIpv6FilterId TFilterID, pwTemplateIgmpFastLeave TmnxEnabledDisabled, pwTemplateIgmpImportPlcy TNamedItemOrEmpty, pwTemplateIgmpLastMembIntvl Unsigned32, pwTemplateIgmpMaxNbrGrps Unsigned32, pwTemplateIgmpGenQueryIntvl Unsigned32, pwTemplateIgmpQueryRespIntvl Unsigned32, pwTemplateIgmpRobustCount Unsigned32, pwTemplateIgmpSendQueries TmnxEnabledDisabled, pwTemplateIgmpMcacPolicyName TPolicyStatementNameOrEmpty, pwTemplateIgmpMcacUnconstBW Integer32, pwTemplateIgmpMcacPrRsvMndBW Integer32, pwTemplateIgmpVersion TmnxIgmpVersion } pwTemplateId OBJECT-TYPE SYNTAX PWTemplateId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The PW template identifier." ::= { pwTemplateEntry 1 } pwTemplateRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of pwTemplateRowStatus is used for the creation and deletion of PW templates." ::= { pwTemplateEntry 2 } pwTemplateLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of pwTemplateLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { pwTemplateEntry 3 } pwTemplateUseProvisionedSdp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of pwTemplateUseProvisionedSdp specifies whether the to use an already provisioned SDP. A value of 'true' specifies that the tunnel manager will be consulted for an existing active SDP. Otherwise, a value of 'false' specifies that the default SDP template will be used to use for instantiation of the SDP." DEFVAL { false } ::= { pwTemplateEntry 4 } pwTemplateVcType OBJECT-TYPE SYNTAX SdpBindVcType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of pwTemplateVcType specifies the type of virtual circuit (VC) associated with the SDP Bind." DEFVAL { ether } ::= { pwTemplateEntry 5 } pwTemplateAccountingPolicyId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of pwTemplateAccountingPolicyId specifies the policy to use to collect accounting statistics on the SDP Bind. The value zero indicates that the agent should use the default accounting policy, if one exists." DEFVAL { 0 } ::= { pwTemplateEntry 6 } pwTemplateCollectAcctStats OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of pwTemplateCollectAcctStats specifies whether the agent collects accounting statistics for the SDP Bind. When the value is 'true' the agent collects accounting statistics on the SDP Bind." DEFVAL { false } ::= { pwTemplateEntry 7 } pwTemplateMacLearning OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-create STATUS current DESCRIPTION "The value of pwTemplateMacLearning specifies whether the MAC learning process is enabled for the SDP Bind. The value is ignored if MAC learning is disabled at service level." DEFVAL { enabled } ::= { pwTemplateEntry 8 } pwTemplateMacAgeing OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-create STATUS current DESCRIPTION "The value of pwTemplateMacAgeing specifies whether the MAC aging process is enabled for the SDP Bind. The value is ignored if MAC aging is disabled at the service level." DEFVAL { enabled } ::= { pwTemplateEntry 9 } pwTemplateDiscardUnknownSource OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-create STATUS current DESCRIPTION "With the object pwTemplateMacAddressLimit a limit can be configured for the max number of MAC addresses that will be learned on the SDP Bind (only for spoke SDPs). When the limit is reached, packets with unknown source MAC address are forwarded by default. By setting sdpBindTlsDiscardUnknownSource to 'enabled', packets with unknown source MAC will be dropped instead." DEFVAL { disabled } ::= { pwTemplateEntry 10 } pwTemplateLimitMacMove OBJECT-TYPE SYNTAX TlsLimitMacMove MAX-ACCESS read-create STATUS current DESCRIPTION "The value of pwTemplateLimitMacMove specifies the behavior for when the re-learn rate specified by svcTlsMacMoveMaxRate is exceeded. When pwTemplateLimitMacMove value is set to 'blockable' the agent will monitor the MAC relearn rate on the SDP Bind, and it will block it when the re-learn rate specified by svcTlsMacMoveMaxRate is exceeded. When the value is 'nonBlockable' the SDP Bind will not be blocked, and another blockable SDP Bind will be blocked instead." DEFVAL { blockable } ::= { pwTemplateEntry 11 } pwTemplateMacPinning OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-create STATUS current DESCRIPTION "The value of pwTemplateMacPinning specifies whether or not MAC address pinning is active on the SDP Bind (mesh or spoke). Setting the value to 'enabled' disables re-learning of MAC addresses on other SAPs or SDPs within the same VPLS; the MAC address will hence remain attached to the SDP Bind for the duration of its age-timer. This object has effect only for MAC addresses learned via the normal MAC learning process, and not for entries learned via DHCP. The value will be set by default to 'disabled'. However for a spoke SDP that belongs to a residential SHG, the value is set to enabled by the system, and cannot be altered by the operator." DEFVAL { disabled } ::= { pwTemplateEntry 12 } pwTemplateVlanVcTag OBJECT-TYPE SYNTAX Unsigned32 ('0000'H..'0fff'H) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of pwTemplateVlanVcTag specifies the VLAN VC tag for the SDP Bind." DEFVAL { '0fff'H } ::= { pwTemplateEntry 13 } pwTemplateMacAddressLimit OBJECT-TYPE SYNTAX Unsigned32 (0..196607) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of pwTemplateMacAddressLimit specifies the maximum number of learned and static entries allowed in the FDB for the SDP Bind. The value 0 specifies no limit for the SDP Bind. The command is valid only for spoke SDPs. When the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisOperMode is not 'c', the maximum value of pwTemplateMacAddressLimit is '131071'." DEFVAL { 0 } ::= { pwTemplateEntry 14 } pwTemplateShgName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of pwTemplateShgName specifies the name of the split-horizon group where the spoke SDP Bind belongs to. By default a spoke SDP Bind does not belong to any split-horizon group. The name specified must correspond to an existing split-horizon group in the TLS service where the spoke SDP Bind is defined." DEFVAL { "" } ::= { pwTemplateEntry 15 } pwTemplateShgDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of pwTemplateShgDescription specifies a user-provided description for split-horizon group on the SDP Bind." DEFVAL { "" } ::= { pwTemplateEntry 16 } pwTemplateShgRestProtSrcMac OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of pwTemplateShgRestProtSrcMac specifies how the agent will handle relearn requests for protected MAC addresses. When the value of this object is 'true' requests to relearn a protected MAC address will be ignored." DEFVAL { false } ::= { pwTemplateEntry 17 } pwTemplateShgRestUnprotDstMac OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of pwTemplateShgRestUnprotDstMac specifies how the system will forward packets destined to an unprotected MAC address. When the value of this object is 'true' packets destined to an unprotected MAC address will be dropped." DEFVAL { false } ::= { pwTemplateEntry 18 } pwTemplateEgressMacFilterId OBJECT-TYPE SYNTAX TFilterID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of pwTemplateEgressMacFilterId specifies the tMacFilterId which indexes an egress filter entry in ALCATEL-IND1-TIMETRA-FILTER-MIB::tMacFilterTable, or zero if no filter is specified." DEFVAL { 0 } ::= { pwTemplateEntry 19 } pwTemplateEgressIpFilterId OBJECT-TYPE SYNTAX TFilterID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of pwTemplateEgressIpFilterId specifies the tIPFilterId which indexes an egress filter entry in ALCATEL-IND1-TIMETRA-FILTER-MIB::tIPFilterTable, or zero if no filter is specified." DEFVAL { 0 } ::= { pwTemplateEntry 20 } pwTemplateEgressIpv6FilterId OBJECT-TYPE SYNTAX TFilterID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of pwTemplateEgressIpv6FilterId specifies the tIPv6FilterId which indexes an egress filter entry in ALCATEL-IND1-TIMETRA-FILTER-MIB::tIPv6FilterTable, or zero if no filter is specified." DEFVAL { 0 } ::= { pwTemplateEntry 21 } pwTemplateIngressMacFilterId OBJECT-TYPE SYNTAX TFilterID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of pwTemplateIngressMacFilterId specifies the tMacFilterId which indexes an ingress filter entry in ALCATEL-IND1-TIMETRA-FILTER-MIB::tMacFilterTable, or zero if no filter is specified." DEFVAL { 0 } ::= { pwTemplateEntry 22 } pwTemplateIngressIpFilterId OBJECT-TYPE SYNTAX TFilterID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of pwTemplateIngressIpFilterId specifies the tIPFilterId which indexes an ingress filter entry in ALCATEL-IND1-TIMETRA-FILTER-MIB::tIPFilterTable, or zero if no filter is specified." DEFVAL { 0 } ::= { pwTemplateEntry 23 } pwTemplateIngressIpv6FilterId OBJECT-TYPE SYNTAX TFilterID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of pwTemplateIngressIpv6FilterId specifies the tIPv6FilterId which indexes an ingress filter entry in ALCATEL-IND1-TIMETRA-FILTER-MIB::tIPv6FilterTable, or zero if no filter is specified." DEFVAL { 0 } ::= { pwTemplateEntry 24 } pwTemplateIgmpFastLeave OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-create STATUS current DESCRIPTION "The value of pwTemplateIgmpFastLeave specifies whether or not fastleave is allowed on the SDP Bind. If set to 'enabled', the system prunes the port on which an IGMP 'leave' message has been received without waiting for the Group Specific Query to timeout." DEFVAL { disabled } ::= { pwTemplateEntry 25 } pwTemplateIgmpImportPlcy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of pwTemplateIgmpImportPlcy specifies a policy statement that must be applied to all incoming IGMP messages on the SDP Bind." DEFVAL { "" } ::= { pwTemplateEntry 26 } pwTemplateIgmpLastMembIntvl OBJECT-TYPE SYNTAX Unsigned32 (1..50) UNITS "deci-seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of pwTemplateIgmpLastMembIntvl specifies the Max Response Time (in tenths of a second) used in Group-Specific and Group-Source-Specific Queries sent in response to 'leave' messages. This is also the amount of time between Group-Specific Query messages. This value may be tuned to modify the leave latency of the network. A reduced value results in reduced time to detect the loss of the last member of a group." DEFVAL { 10 } ::= { pwTemplateEntry 27 } pwTemplateIgmpMaxNbrGrps OBJECT-TYPE SYNTAX Unsigned32 (0..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of pwTemplateIgmpMaxNbrGrps specifies how many group addresses are allowed for the SDP Bind. The value 0 means that no limit is imposed." DEFVAL { 0 } ::= { pwTemplateEntry 28 } pwTemplateIgmpGenQueryIntvl OBJECT-TYPE SYNTAX Unsigned32 (2..1024) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of pwTemplateIgmpGenQueryIntvl specifies the interval (in seconds) between two consecutive general queries sent by the system on the SDP. The value of this object is only meaningful when the value of pwTemplateIgmpSendQueries is 'enabled'." DEFVAL { 125 } ::= { pwTemplateEntry 29 } pwTemplateIgmpQueryRespIntvl OBJECT-TYPE SYNTAX Unsigned32 (1..1023) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of pwTemplateIgmpQueryRespIntvl specifies the maximum response time (in seconds) advertised in IGMPv2/v3 queries. The value of this object is only meaningful when the value of pwTemplateIgmpSendQueries is 'enabled'." DEFVAL { 10 } ::= { pwTemplateEntry 30 } pwTemplateIgmpRobustCount OBJECT-TYPE SYNTAX Unsigned32 (2..7) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of pwTemplateIgmpRobustCount specifies the value of the Robust count. This object allows tuning for the expected packet loss on the SDP. If an SDP is expected to be lossy, the Robustness Variable may be increased. IGMP snooping is robust to (Robustness Variable-1) packet losses. The value of this object is only meaningful when the value of pwTemplateIgmpSendQueries is 'enabled'." DEFVAL { 2 } ::= { pwTemplateEntry 31 } pwTemplateIgmpSendQueries OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-create STATUS current DESCRIPTION "The value of pwTemplateIgmpSendQueries specifies whether the system generates General Queries by itself on the SDP." DEFVAL { disabled } ::= { pwTemplateEntry 32 } pwTemplateIgmpMcacPolicyName OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of pwTemplateIgmpMcacPolicyName indicates the name of the multicast CAC policy." DEFVAL { "" } ::= { pwTemplateEntry 33 } pwTemplateIgmpMcacUnconstBW OBJECT-TYPE SYNTAX Integer32 (-1|0..2147483647) UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of pwTemplateIgmpMcacUnconstBW specifies the bandwidth assigned for interface's multicast CAC policy traffic in kilo-bits per second(kbps). If the default value of '-1' is set, there is no constraint on bandwidth allocated at the interface. If the value of pwTemplateIgmpMcacUnconstBW is set to '0' and if a multicast CAC policy is assigned on the interface, then no group (channel) from that policy is allowed on that interface." DEFVAL { -1 } ::= { pwTemplateEntry 34 } pwTemplateIgmpMcacPrRsvMndBW OBJECT-TYPE SYNTAX Integer32 (-1|0..2147483647) UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of pwTemplateIgmpMcacPrRsvMndBW specifies the bandwidth pre-reserved for all the mandatory channels on a given interface in kilo-bits per second(kbps). If the value of pwTemplateIgmpMcacUnconstBW is '0', no mandatory channels are allowed. If the value of pwTemplateIgmpMcacUnconstBW is '-1', then all mandatory and optional channels are allowed. If the value of pwTemplateIgmpMcacPrRsvMndBW is equal to the value of pwTemplateIgmpMcacUnconstBW, then all the unconstrained bandwidth on a given interface is allocated to mandatory channels configured through multicast CAC policy on that interface and no optional groups (channels) are allowed. The value of pwTemplateIgmpMcacPrRsvMndBW should always be less than or equal to that of pwTemplateIgmpMcacUnconstBW. An attempt to set the value of pwTemplateIgmpMcacPrRsvMndBW greater than that of pwTemplateIgmpMcacUnconstBW will result in 'inconsistentValue' error." DEFVAL { -1 } ::= { pwTemplateEntry 35 } pwTemplateIgmpVersion OBJECT-TYPE SYNTAX TmnxIgmpVersion MAX-ACCESS read-create STATUS current DESCRIPTION "The value of pwTemplateIgmpVersion specifies the version of IGMP for the PW template." DEFVAL { version3 } ::= { pwTemplateEntry 36 } -- ---------------------------------------------- -- PW Template IGMP Snooping Group Source Table -- ---------------------------------------------- pwTemplateIgmpSnpgGrpSrcTblLC OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of pwTemplateIgmpSnpgGrpSrcTblLC indicates the sysUpTime at the time of the last modification of pwTemplateIgmpSnpgGrpSrcTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxSdpObjs 19 } pwTemplateIgmpSnpgGrpSrcTable OBJECT-TYPE SYNTAX SEQUENCE OF PwTemplateIgmpSnpgGrpSrcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains entries for static IGMP Snooping groups." ::= { tmnxSdpObjs 20 } pwTemplateIgmpSnpgGrpSrcEntry OBJECT-TYPE SYNTAX PwTemplateIgmpSnpgGrpSrcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a specific static IGMP Snooping groups." INDEX { pwTemplateId, pwTemplateIgmpSnpgGrpAddrType, pwTemplateIgmpSnpgGrpAddr, pwTemplateIgmpSnpgSrcAddrType, pwTemplateIgmpSnpgSrcAddr } ::= { pwTemplateIgmpSnpgGrpSrcTable 1} PwTemplateIgmpSnpgGrpSrcEntry ::= SEQUENCE { pwTemplateIgmpSnpgGrpAddrType InetAddressType, pwTemplateIgmpSnpgGrpAddr InetAddress, pwTemplateIgmpSnpgSrcAddrType InetAddressType, pwTemplateIgmpSnpgSrcAddr InetAddress, pwTemplateIgmpSnpgRowStatus RowStatus, pwTemplateIgmpSnpgLastChngd TimeStamp } pwTemplateIgmpSnpgGrpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast group address type for this entry." ::= { pwTemplateIgmpSnpgGrpSrcEntry 1 } pwTemplateIgmpSnpgGrpAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(0|4)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast group address for this entry." ::= { pwTemplateIgmpSnpgGrpSrcEntry 2 } pwTemplateIgmpSnpgSrcAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The source address type for this entry." ::= { pwTemplateIgmpSnpgGrpSrcEntry 3 } pwTemplateIgmpSnpgSrcAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(0|4)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The source address for this entry." ::= { pwTemplateIgmpSnpgGrpSrcEntry 4 } pwTemplateIgmpSnpgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of pwTemplateIgmpSnpgRowStatus is used for the creation and deletion of static IGMP snooping entries." ::= { pwTemplateIgmpSnpgGrpSrcEntry 5 } pwTemplateIgmpSnpgLastChngd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of pwTemplateIgmpSnpgLastChngd indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { pwTemplateIgmpSnpgGrpSrcEntry 6 } -- -------------------------------------------- -- SDP Bind TLS Egress MFIB Allowed MDA Destinations Table -- -------------------------------------------- pwTemplateMfibAllowedMdaTblLC OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of pwTemplateMfibAllowedMdaTblLC indicates the sysUpTime at the time of the last modification of pwTemplateMfibAllowedMdaTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxSdpObjs 21 } pwTemplateMfibAllowedMdaTable OBJECT-TYPE SYNTAX SEQUENCE OF PwTemplateMfibAllowedMdaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The pwTemplateMfibAllowedMdaTable has an entry for each MFIB allowed MDA destination for an PW template." ::= { tmnxSdpObjs 22 } pwTemplateMfibAllowedMdaEntry OBJECT-TYPE SYNTAX PwTemplateMfibAllowedMdaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents an MFIB allowed MDA destination for an PW template configured in the system. Entries can be created and deleted via SNMP SET operations on the object pwTemplateMfibMdaRowStatus." INDEX { pwTemplateId, tmnxChassisIndex, tmnxCardSlotNum, tmnxMDASlotNum } ::= { pwTemplateMfibAllowedMdaTable 1 } PwTemplateMfibAllowedMdaEntry ::= SEQUENCE { pwTemplateMfibMdaRowStatus RowStatus } pwTemplateMfibMdaRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of pwTemplateMfibMdaRowStatus controls the creation and deletion of rows in this table." ::= { pwTemplateMfibAllowedMdaEntry 1 } -- ---------------------------------------- -- SDP BIND TLS MRP Information Table -- ---------------------------------------- sdpBindTlsMrpTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsMrpTableLastChanged indicates the sysUpTime at the time of the last modification of sdpBindTlsMrpTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxSdpObjs 23 } sdpBindTlsMrpTable OBJECT-TYPE SYNTAX SEQUENCE OF SdpBindTlsMrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sdpBindTlsMrpTable allows the operator to modify attributes of the Multiple Registration Protocol (MRP) feature for the TLS SDP Bind. This table contains an entry for each TLS SDP Bind created by the user using either sdpBindTlsTable or sdpBindMeshTlsTable. Rows in this table are created and deleted automatically by the system." ::= { tmnxSdpObjs 24 } sdpBindTlsMrpEntry OBJECT-TYPE SYNTAX SdpBindTlsMrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry contains objects that allows the modification of the Multiple Registration Protocol feature for a specific SDP-Binding in a TLS service." INDEX { svcId, sdpBindId } ::= { sdpBindTlsMrpTable 1 } SdpBindTlsMrpEntry ::= SEQUENCE { sdpBindTlsMrpLastChngd TimeStamp, sdpBindTlsMrpJoinTime Unsigned32, sdpBindTlsMrpLeaveTime Unsigned32, sdpBindTlsMrpLeaveAllTime Unsigned32, sdpBindTlsMrpPeriodicTime Unsigned32, sdpBindTlsMrpPeriodicEnabled TruthValue, sdpBindTlsMrpRxPdus Counter32, sdpBindTlsMrpDroppedPdus Counter32, sdpBindTlsMrpTxPdus Counter32, sdpBindTlsMrpRxNewEvent Counter32, sdpBindTlsMrpRxJoinInEvent Counter32, sdpBindTlsMrpRxInEvent Counter32, sdpBindTlsMrpRxJoinEmptyEvent Counter32, sdpBindTlsMrpRxEmptyEvent Counter32, sdpBindTlsMrpRxLeaveEvent Counter32, sdpBindTlsMrpTxNewEvent Counter32, sdpBindTlsMrpTxJoinInEvent Counter32, sdpBindTlsMrpTxInEvent Counter32, sdpBindTlsMrpTxJoinEmptyEvent Counter32, sdpBindTlsMrpTxEmptyEvent Counter32, sdpBindTlsMrpTxLeaveEvent Counter32 } sdpBindTlsMrpLastChngd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsMrpLastChngd indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { sdpBindTlsMrpEntry 1 } sdpBindTlsMrpJoinTime OBJECT-TYPE SYNTAX Unsigned32 (1..10) UNITS "deci-seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sdpBindTlsMrpJoinTime specifies a timer value in 10ths of seconds which determines the maximum rate at which attribute join messages can be sent on the SDP." DEFVAL { 2 } ::= { sdpBindTlsMrpEntry 2 } sdpBindTlsMrpLeaveTime OBJECT-TYPE SYNTAX Unsigned32 (30..60) UNITS "deci-seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sdpBindTlsMrpLeaveTime specifies a timer value in 10ths of seconds which determines the amount of time a registered attribute is held in leave state before the registration is removed." DEFVAL { 30 } ::= { sdpBindTlsMrpEntry 3 } sdpBindTlsMrpLeaveAllTime OBJECT-TYPE SYNTAX Unsigned32 (60..300) UNITS "deci-seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sdpBindTlsMrpLeaveAllTime specifies a timer value in 10ths of seconds which determines the frequency where all attribute declarations on the SDP are all refreshed." DEFVAL { 100 } ::= { sdpBindTlsMrpEntry 4 } sdpBindTlsMrpPeriodicTime OBJECT-TYPE SYNTAX Unsigned32 (10..100) UNITS "deci-seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sdpBindTlsMrpPeriodicTime specifies a timer value in 10ths of seconds which determines the frequency of re-transmission of attribute declarations." DEFVAL { 10 } ::= { sdpBindTlsMrpEntry 5 } sdpBindTlsMrpPeriodicEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The value of sdpBindTlsMrpPeriodicEnabled specifies whether re-transmission of attribute declarations is enabled." DEFVAL { false } ::= { sdpBindTlsMrpEntry 6 } sdpBindTlsMrpRxPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsMrpRxPdus indicates the number of MRP packets received on this SDP Bind." ::= { sdpBindTlsMrpEntry 7 } sdpBindTlsMrpDroppedPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsMrpDroppedPdus indicates the number of dropped MRP packets on this SDP Bind." ::= { sdpBindTlsMrpEntry 8 } sdpBindTlsMrpTxPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsMrpTxPdus indicates the number of MRP packets transmitted on this SDP Bind." ::= { sdpBindTlsMrpEntry 9 } sdpBindTlsMrpRxNewEvent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsMrpRxNewEvent indicates the number of 'New' MRP events received on this SDP Bind." ::= { sdpBindTlsMrpEntry 10 } sdpBindTlsMrpRxJoinInEvent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsMrpRxJoinInEvent indicates the number of 'Join-In' MRP events received on this SDP Bind." ::= { sdpBindTlsMrpEntry 11 } sdpBindTlsMrpRxInEvent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsMrpRxInEvent indicates the number of 'In' MRP events received on this SDP Bind." ::= { sdpBindTlsMrpEntry 12 } sdpBindTlsMrpRxJoinEmptyEvent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsMrpRxJoinEmptyEvent indicates the number of 'Join Empty' MRP events received on this SDP Bind." ::= { sdpBindTlsMrpEntry 13 } sdpBindTlsMrpRxEmptyEvent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsMrpRxEmptyEvent indicates the number of 'Empty' MRP events received on this SDP Bind." ::= { sdpBindTlsMrpEntry 14 } sdpBindTlsMrpRxLeaveEvent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsMrpRxLeaveEvent indicates the number of 'Leave' MRP events received on this SDP Bind." ::= { sdpBindTlsMrpEntry 15 } sdpBindTlsMrpTxNewEvent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsMrpTxNewEvent indicates the number of 'New' MRP events transmitted on this SDP Bind." ::= { sdpBindTlsMrpEntry 16 } sdpBindTlsMrpTxJoinInEvent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsMrpTxJoinInEvent indicates the number of 'Join-In' MRP events transmitted on this SDP Bind." ::= { sdpBindTlsMrpEntry 17 } sdpBindTlsMrpTxInEvent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsMrpTxInEvent indicates the number of 'In' MRP events transmitted on this SDP Bind." ::= { sdpBindTlsMrpEntry 18 } sdpBindTlsMrpTxJoinEmptyEvent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsMrpTxJoinEmptyEvent indicates the number of 'Join Empty' MRP events transmitted on this SDP Bind." ::= { sdpBindTlsMrpEntry 19 } sdpBindTlsMrpTxEmptyEvent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsMrpTxEmptyEvent indicates the number of 'Empty' MRP events transmitted on this SDP Bind." ::= { sdpBindTlsMrpEntry 20 } sdpBindTlsMrpTxLeaveEvent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsMrpTxLeaveEvent indicates the number of 'Leave' MRP events transmitted on this SDP Bind." ::= { sdpBindTlsMrpEntry 21 } -- ------------------------- -- SDP Bind TLS MMRP Table -- ------------------------- sdpBindTlsMmrpTable OBJECT-TYPE SYNTAX SEQUENCE OF SdpBindTlsMmrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains an entry for each MAC address managed by Multiple MAC Registration Protocol (MMRP) on the SDP Bind for the TLS. Entries are dynamically created and destroyed by the system as the MAC Addresses are registered or declared in MMRP." ::= { tmnxSdpObjs 25 } sdpBindTlsMmrpEntry OBJECT-TYPE SYNTAX SdpBindTlsMmrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MMRP specific information about a MAC address managed by MMRP on a SDP Bind in a TLS." INDEX { svcId, sdpBindId, sdpBindTlsMmrpMacAddr } ::= { sdpBindTlsMmrpTable 1 } SdpBindTlsMmrpEntry ::= SEQUENCE { sdpBindTlsMmrpMacAddr MacAddress, sdpBindTlsMmrpDeclared TruthValue, sdpBindTlsMmrpRegistered TruthValue } sdpBindTlsMmrpMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sdpBindTlsMmrpMacAddr indicates an ethernet MAC address which is being managed by MMRP on this SAP." ::= { sdpBindTlsMmrpEntry 1 } sdpBindTlsMmrpDeclared OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsMmrpDeclared indicates whether the MRP applicant on this SAP is declaring this MAC address on behalf of MMRP." ::= { sdpBindTlsMmrpEntry 2 } sdpBindTlsMmrpRegistered OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpBindTlsMmrpRegistered indicates whether the MRP registrant on this SAP has notified MMRP of a registration of this MAC address." ::= { sdpBindTlsMmrpEntry 3 } -- --------------------------------------------------------------------- -- SDP Auto Bind Bgp Auto-Discovery Info -- -- Sparse Dependent Extention of the sdpBindTable. -- -- The same indexes are used for both the base table, sdpBindTable, -- and the sparse dependent table, sdpAutoBindBgpInfoTable. -- -- This in effect extends the sdpBindTable with additional columns. -- Rows are created in the sdpAutoBindBgpInfoTable only for those entries -- in the sdpBindTable that are created as a result of BGP Auto-discovery. -- -- Deletion of a row in the sdpBindTable results in the -- same fate for the row in the sdpAutoBindBgpInfoTable. -- --------------------------------------------------------------------- sdpAutoBindBgpInfoTableLC OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpAutoBindBgpInfoTableLC indicates the sysUpTime at the time of the last modification of sdpAutoBindBgpInfoTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxSdpObjs 26 } sdpAutoBindBgpInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SdpAutoBindBgpInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sdpAutoBindBgpInfoTable has an entry for each SDP Bind entry from sdpBindTable which was created as a result of BGP Auto-discovery." ::= { tmnxSdpObjs 27 } sdpAutoBindBgpInfoEntry OBJECT-TYPE SYNTAX SdpAutoBindBgpInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry contains BGP-related information for an SDP Bind entry created as a result of BGP Auto-discovery." INDEX { svcId, sdpBindId } ::= { sdpAutoBindBgpInfoTable 1 } SdpAutoBindBgpInfoEntry ::= SEQUENCE { sdpAutoBindBgpInfoTemplateId PWTemplateId, sdpAutoBindBgpInfoAGI TmnxVPNRouteDistinguisher, sdpAutoBindBgpInfoSAII Unsigned32, sdpAutoBindBgpInfoTAII Unsigned32 } sdpAutoBindBgpInfoTemplateId OBJECT-TYPE SYNTAX PWTemplateId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpAutoBindBgpInfoTemplateId indicates the the value of the pwTemplateId object for the PW template entry used to create this SDP Bind." ::= { sdpAutoBindBgpInfoEntry 1 } sdpAutoBindBgpInfoAGI OBJECT-TYPE SYNTAX TmnxVPNRouteDistinguisher MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpAutoBindBgpInfoAGI indicates the Attachment Group Indentifier (AGI) portion of the Generalized Id FEC element from the pseudowire setup for this SDP Bind." ::= { sdpAutoBindBgpInfoEntry 2 } sdpAutoBindBgpInfoSAII OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpAutoBindBgpInfoSAII indicates the Source Attachment Individual Indentifier (SAII) portion of the Generalized Id FEC element from the pseudowire setup for this SDP Bind." ::= { sdpAutoBindBgpInfoEntry 3 } sdpAutoBindBgpInfoTAII OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sdpAutoBindBgpInfoTAII indicates the Target Attachment Individual Indentifier (TAII) portion of the Generalized Id FEC element from the pseudowire setup for this SDP Bind." ::= { sdpAutoBindBgpInfoEntry 4 } -- ------------------------------------- -- BGP Auto-Discovery SDP Auto Policy Table -- ------------------------------------- svcTlsBgpADPWTempBindTblLC OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of svcTlsBgpADPWTempBindTblLC indicates the sysUpTime at the time of the last modification of svcTlsBgpADPWTempBindTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxSvcObjs 32 } svcTlsBgpADPWTempBindTable OBJECT-TYPE SYNTAX SEQUENCE OF SvcTlsBgpADAutoBindPlcyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "svcTlsBgpADPWTempBindTable contains entries for the associations between SDP Auto-Bind policies and a BGP Auto-Discovery context for a VPLS service." ::= { tmnxSvcObjs 33 } svcTlsBgpADPWTempBindEntry OBJECT-TYPE SYNTAX SvcTlsBgpADAutoBindPlcyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A SDP Auto-Bind Policy entry in the svcTlsBgpADPWTempBindTable." INDEX { svcId, pwTemplateId } ::= { svcTlsBgpADPWTempBindTable 1 } SvcTlsBgpADAutoBindPlcyEntry ::= SEQUENCE { svcTlsBgpADPWTempBindRowStatus RowStatus, svcTlsBgpADPWTempBindLastChngd TimeStamp, svcTlsBgpADPWTempBindSHG TNamedItemOrEmpty } svcTlsBgpADPWTempBindRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of svcTlsBgpADPWTempBindRowStatus is used for the creation and deletion of associations between SDP Auto-Bind policies and a BGP Auto-Discovery context for a VPLS service." ::= { svcTlsBgpADPWTempBindEntry 1 } svcTlsBgpADPWTempBindLastChngd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of svcTlsBgpADPWTempBindLastChngd indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { svcTlsBgpADPWTempBindEntry 2 } svcTlsBgpADPWTempBindSHG OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of svcTlsBgpADPWTempBindSHG specifies the split-horizon group to associate with the SDP Auto-Bind policy in this BGP Auto-Discovery context in a VPLS service. When this Auto-Bind policy is used to create an SDP, this split-horizon group will be associated with the SDP. The name specified must correspond to an existing split-horizon group in the VPLS service, otherwise an 'inconsistentValue' error will be returned." DEFVAL { "" } ::= { svcTlsBgpADPWTempBindEntry 3 } -- ----------------------------------------- -- BGP Auto-Discovery SDP Auto Policy Route Target Table -- ----------------------------------------- svcTlsBgpADPWTempBindRTTblLC OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of svcTlsBgpADPWTempBindRTTblLC indicates the sysUpTime at the time of the last modification of svcTlsBgpADPWTempBindRTTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxSvcObjs 34 } svcTlsBgpADPWTempBindRTTable OBJECT-TYPE SYNTAX SEQUENCE OF SvcTlsBgpADAutoBindPlcyRTEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "svcTlsBgpADPWTempBindTable contains entries for Route Targets associated with a SDP Auto-Bind policy and a BGP Auto-Discovery context for a VPLS service." ::= { tmnxSvcObjs 35 } svcTlsBgpADPWTempBindRTEntry OBJECT-TYPE SYNTAX SvcTlsBgpADAutoBindPlcyRTEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A SDP Auto-Bind Policy Route Target entry in the svcTlsBgpADPWTempBindRTTable." INDEX { svcId, pwTemplateId, IMPLIED svcTlsBgpADPWTempBindRT } ::= { svcTlsBgpADPWTempBindRTTable 1 } SvcTlsBgpADAutoBindPlcyRTEntry ::= SEQUENCE { svcTlsBgpADPWTempBindRT TNamedItem, svcTlsBgpADPWTempBindRTRowStat RowStatus } svcTlsBgpADPWTempBindRT OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of svcTlsBgpADPWTempBindRT is the Route Target associated with a PW template and a BGP Auto-Discovery context for a VPLS service. When advertisements are received with this Route Target, the PW template specified by the index, pwTemplateId, will be used to create the SDP." ::= { svcTlsBgpADPWTempBindRTEntry 1 } svcTlsBgpADPWTempBindRTRowStat OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of svcTlsBgpADPWTempBindRTRowStat is used for the association of Route Targets with a SDP Auto-Bind policy and a BGP Auto-Discovery context for a VPLS service." ::= { svcTlsBgpADPWTempBindRTEntry 2 } -- ------------------------- -- L2 Route Table -- ------------------------- svcL2RteTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of svcL2RteTableLastChanged indicates the sysUpTime at the time of the last modification of svcL2RteTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxSvcObjs 38 } svcL2RteTable OBJECT-TYPE SYNTAX SEQUENCE OF SvcL2RteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "svcL2RteTable contains entries for L2 routes." ::= { tmnxSvcObjs 39 } svcL2RteEntry OBJECT-TYPE SYNTAX SvcL2RteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An L2 route entry in the svcL2RteTable." INDEX { svcId, svcL2RteVsiPrefix, svcL2RteRouteDistinguisher, svcL2RteNextHopType, svcL2RteNextHop } ::= { svcL2RteTable 1} SvcL2RteEntry ::= SEQUENCE { svcL2RteVsiPrefix Unsigned32, svcL2RteRouteDistinguisher TmnxVPNRouteDistinguisher, svcL2RteNextHopType InetAddressType, svcL2RteNextHop InetAddress, svcL2RteSdpBindId SdpBindId, svcL2RtePwTemplateId PWTemplateId } svcL2RteVsiPrefix OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of svcL2RteVsiPrefix is the low-order 4 bytes of the Virtual Switch Instance idendifier (VSI-id) of the remote VSI for this L2 route." ::= { svcL2RteEntry 1 } svcL2RteRouteDistinguisher OBJECT-TYPE SYNTAX TmnxVPNRouteDistinguisher MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of svcL2RteRouteDistinguisher is the high-order 6 bytes of the Virtual Switch Instance idendifier (VSI-id) of the remote VSI for this L2 route." ::= { svcL2RteEntry 2 } svcL2RteNextHopType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of svcL2RteNextHopType indicates the address type of svcL2RteNextHop." ::= { svcL2RteEntry 3 } svcL2RteNextHop OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of svcL2RteNextHop indicates the IP next hop for this L2 route. This value is equivilant to the IP address of the Far End of this L2 route." ::= { svcL2RteEntry 4 } svcL2RteSdpBindId OBJECT-TYPE SYNTAX SdpBindId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of svcL2RteSdpBindId indicates the SDP bind ID of the SDP bind that binds this VPLS context to the VSI indicated by svcL2RteRouteDistinguisher, svcL2RteVsiPrefix, and svcL2RteNextHop." ::= { svcL2RteEntry 5 } svcL2RtePwTemplateId OBJECT-TYPE SYNTAX PWTemplateId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of svcL2RtePwTemplateId indicates the PW template associated with the SDP bind that binds this VPLS context to the VSI indicated by svcL2RteRouteDistinguisher, svcL2RteVsiPrefix, and svcL2RteNextHop." ::= { svcL2RteEntry 6 } -- -------------------------------------- -- SDP Notification Objects -- -------------------------------------- -- tmnxSdpNotifyObjs OBJECT IDENTIFIER ::= ( tmnxSdpObjs 100 } sdpNotifySdpId OBJECT-TYPE SYNTAX SdpId MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The ID of the SDP where SDP Bindings are associated. This object is used by the sdpBindSdpStateChangeProcessed notification to indicate the SDP that changed state and that resulted in having the associated sdpBindStatusChanged events suppressed for all SDP Bindings on that SDP." ::= { tmnxSdpNotifyObjs 1 } dynamicSdpStatus OBJECT-TYPE SYNTAX ConfigStatus MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of dynamicSdpStatus indicates the status of the dynamic SDP which is used by the dynamicSdpConfigChanged and dynamicSdpBindConfigChanged notifications to indicate what state the dynamic SDP or SDP Bind has entered: 'created', 'modified', or 'deleted'." ::= { tmnxSdpNotifyObjs 2 } dynamicSdpOrigin OBJECT-TYPE SYNTAX L2RouteOrigin MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of dynamicSdpOrigin indicates the origin of the dynamic SDP. The origin indicates the protocol or mechanism that created the dynamic SDP." ::= { tmnxSdpNotifyObjs 3 } dynamicSdpCreationError OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object dynamicSdpCreationError indicates the reason why the system was unable to create the dynamic SDP." ::= { tmnxSdpNotifyObjs 4 } dynamicSdpBindCreationError OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object dynamicSdpBindCreationError indicates the reason why the system was unable to create the dynamic SDP Binding." ::= { tmnxSdpNotifyObjs 5 } -- -------------------------------------------- -- SDP traps -- -------------------------------------------- sdpCreated NOTIFICATION-TYPE OBJECTS { sdpId } STATUS obsolete DESCRIPTION "The sdpCreated notification is sent when a new row is created in the sdpInfoTable." ::= { sdpTraps 1 } sdpDeleted NOTIFICATION-TYPE OBJECTS { sdpId } STATUS obsolete DESCRIPTION "The sdpDeleted notification is sent when an existing row is deleted from the ng row is deleted from the sdpInfoTable." ::= { sdpTraps 2 } sdpStatusChanged NOTIFICATION-TYPE OBJECTS { sdpId, sdpAdminStatus, sdpOperStatus } STATUS current DESCRIPTION "The sdpStatusChanged notification is generated when there is a change in the administrative or operating status of an SDP." ::= { sdpTraps 3 } sdpBindCreated NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sdpBindId } STATUS obsolete DESCRIPTION "The sdpBindCreated notification is sent when a new row is created in the sdpBindTable." ::= { sdpTraps 4 } sdpBindDeleted NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sdpBindId } STATUS obsolete DESCRIPTION "The sdpBindDeleted notification is sent when an existing row is deleted from the sdpBindTable." ::= { sdpTraps 5 } sdpBindStatusChanged NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sdpBindId, sdpBindAdminStatus, sdpBindOperStatus, sdpBindOperFlags } STATUS current DESCRIPTION "The sdpBindStatusChanged notification is generated when there is a change in the administrative or operating status of an SDP Binding. Notice that this trap is not generated whenever the SDP Binding operating status change is caused by an operating status change on the associated SDP." ::= { sdpTraps 6 } sdpTlsMacAddrLimitAlarmRaised NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sdpId } STATUS current DESCRIPTION "The sdpTlsMacAddrLimitAlarmRaised notification is sent whenever the number of MAC addresses stored in the FDB for this spoke sdp increases to reach the watermark specified by the object svcTlsFdbTableFullHighWatermark." ::= { sdpTraps 7 } sdpTlsMacAddrLimitAlarmCleared NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sdpId } STATUS current DESCRIPTION "The sdpTlsMacAddrLimitAlarmCleared notification is sent whenever the number of MAC addresses stored in the FDB for this spoke SDP drops to the watermark specified by the object svcTlsFdbTableFullLowWatermark." ::= { sdpTraps 8 } sdpTlsDHCPSuspiciousPcktRcvd NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sdpId, tlsDhcpPacketProblem } STATUS obsolete DESCRIPTION "The sdpTlsDHCPSuspiciousPcktRcvd notification is generated when a DHCP packet is received with suspicious content." ::= { sdpTraps 9 } sdpBindDHCPLeaseEntriesExceeded NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sdpBindId, svcDhcpLseStateNewCiAddr, svcDhcpLseStateNewChAddr, svcDhcpClientLease } STATUS current DESCRIPTION "The sdpBindDHCPLeaseEntriesExceeded notification is generated when the number of DHCP lease state entries on a given IES or VRPN spoke-SDP reaches the user configurable upper limit given by ALCATEL-IND1-TIMETRA-VRTR-MIB::vRtrIfDHCPLeasePopulate." ::= { sdpTraps 10 } sdpBindDHCPLseStateOverride NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sdpBindId, svcDhcpLseStateNewCiAddr, svcDhcpLseStateNewChAddr, svcDhcpLseStateOldCiAddr, svcDhcpLseStateOldChAddr } STATUS current DESCRIPTION "The sdpBindDHCPLseStateOverride notification is generated when an existing DHCP lease state is overridden by a new lease state which has the same IP address but a different MAC address. This trap is only applicable for IES and VPRN spoke-SDPs." ::= { sdpTraps 11 } sdpBindDHCPSuspiciousPcktRcvd NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sdpBindId, svcDhcpPacketProblem } STATUS current DESCRIPTION "The sdpBindDHCPSuspiciousPcktRcvd notification is generated when a DHCP packet is received with suspicious content." ::= { sdpTraps 12 } sdpBindDHCPLseStatePopulateErr NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sdpBindId, svcDhcpLseStatePopulateError } STATUS current DESCRIPTION "The sdpBindDHCPLseStatePopulateErr notification indicates that the system was unable to update the DHCP Lease State table with the information contained in the DHCP ACK message. The DHCP ACK message has been discarded. This trap is only applicable for IES and VPRN spoke-SDPs." ::= { sdpTraps 13 } sdpBindPwPeerStatusBitsChanged NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sdpBindId, sdpBindPwPeerStatusBits } STATUS current DESCRIPTION "The sdpBindPwPeerStatusBitsChanged notification is generated when there is a change in the PW status bits received from the peer." ::= { sdpTraps 14 } sdpBindTlsMacMoveExceeded NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sdpBindId, sdpBindAdminStatus, sdpBindOperStatus, sdpBindTlsMacMoveRateExcdLeft, sdpBindTlsMacMoveNextUpTime, svcTlsMacMoveMaxRate } STATUS current DESCRIPTION "The sdpBindTlsMacMoveExceeded notification is generated when the SDP exceeds the TLS svcTlsMacMoveMaxRate." ::= { sdpTraps 15 } sdpBindPwPeerFaultAddrChanged NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sdpBindId, sdpBindPwFaultInetAddressType, sdpBindPwFaultInetAddress } STATUS current DESCRIPTION "The sdpBindPwPeerFaultAddrChanged notification is generated when there is a change in the IP address included in the PW status message sent by the peer. This notification is only generated if the IP address is the only information in the notification that changed. If the status bits changed as well, then the sdpBindPwPeerStatusBitsChanged notification will be generated instead." ::= { sdpTraps 16 } sdpBindDHCPProxyServerError NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sdpBindId, svcDhcpProxyError } STATUS current DESCRIPTION "The sdpBindDHCPProxyServerError notification indicates that the system was unable to proxy DHCP requests." ::= { sdpTraps 17 } sdpBindDHCPCoAError NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sdpBindId, svcDhcpCoAError } STATUS obsolete DESCRIPTION "The sdpBindDHCPCoAError notification indicates that the system was unable to process a Change of Authorization (CoA) request from a Radius server." ::= { sdpTraps 18 } sdpBindDHCPSubAuthError NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sdpBindId, svcDhcpSubAuthError } STATUS obsolete DESCRIPTION "The sdpBindDHCPSubAuthError notification indicates that the system encountered a problem while trying to authenticate a subscriber." ::= { sdpTraps 19 } sdpBindSdpStateChangeProcessed NOTIFICATION-TYPE OBJECTS { sdpNotifySdpId } STATUS current DESCRIPTION "The sdpBindSdpStateChangeProcessed notification indicates that the agent has finished processing an SDP state change event, and that the operating status of all the affected SDP Bindings has been updated accordingly. The value of the sdpNotifySdpId object indicates the SDP that experienced the state change." ::= { sdpTraps 20 } sdpBindDHCPLseStateMobilityErr NOTIFICATION-TYPE OBJECTS { custId, svcId, svcVpnId, sdpBindId, svcDhcpLseStatePopulateError } STATUS current DESCRIPTION "The sdpBindDHCPLseStateMobilityErr notification indicates that the system was unable to perform a mobility check for this lease state." ::= { sdpTraps 21 } sdpBandwidthOverbooked NOTIFICATION-TYPE OBJECTS { sdpId, sdpMaxBookableBandwidth, sdpBookedBandwidth } STATUS current DESCRIPTION "The sdpBandwidthOverbooked notification indicates that the bandwidth that has been allocated to the SDP bindings indicated by sdpBookedBandwidth exceeds sdpMaxBookableBandwidth." ::= { sdpTraps 22 } sdpBindInsufficientBandwidth NOTIFICATION-TYPE OBJECTS { svcId, sdpId, sdpBindId, sdpAvailableBandwidth, sdpBindAdminBandwidth } STATUS current DESCRIPTION "The sdpBindInsufficientBandwidth notification indicates that the available bandwidth of the SDP is insufficient to satisfy the bandwidth requirement specified by sdpBindAdminBandwidth of this SDP binding." ::= { sdpTraps 23 } dynamicSdpConfigChanged NOTIFICATION-TYPE OBJECTS { dynamicSdpOrigin, sdpId, svcL2RteSdpBindId, dynamicSdpStatus } STATUS current DESCRIPTION "The dynamicSdpConfigChanged notification is generated when a dynamic SDP is 'created', 'modified', or 'deleted', with the value of dynamicSdpStatus indicated which state it has entered." ::= { sdpTraps 24 } dynamicSdpBindConfigChanged NOTIFICATION-TYPE OBJECTS { dynamicSdpOrigin, sdpId, svcL2RteSdpBindId, dynamicSdpStatus } STATUS current DESCRIPTION "The dynamicSdpBindConfigChanged notification is generated when a dynamic SDP Bind is 'created', 'modified', or 'deleted', with the value of dynamicSdpStatus indicated which state it has entered." ::= { sdpTraps 25 } dynamicSdpCreationFailed NOTIFICATION-TYPE OBJECTS { svcL2RteSdpBindId, dynamicSdpOrigin, dynamicSdpCreationError } STATUS current DESCRIPTION "The dynamicSdpCreationFailed notification is generated when the system fails to create a dynamic SDP." ::= { sdpTraps 26 } dynamicSdpBindCreationFailed NOTIFICATION-TYPE OBJECTS { svcL2RteSdpBindId, dynamicSdpOrigin, sdpId, pwTemplateLastChanged, dynamicSdpBindCreationError } STATUS current DESCRIPTION "The dynamicSdpBindCreationFailed notification is generated when the system fails to create a dynamic SDP Bind." ::= { sdpTraps 27 } -- ------------------------------------ -- TLS STP traps -- ------------------------------------ unacknowledgedTCN NOTIFICATION-TYPE OBJECTS { custId, svcId, sdpId } STATUS current DESCRIPTION "The unacknowledgedTCN notification is generated when a TCN sent towards the root bridge on the root port (SAP or SDP binding) has not been acknowledged within the allowed time. A portion of the spanning tree topology may not have been notified that a topology change has taken place. FDB tables on some devices may take significantly longer to represent the new distribution of layer-2 addresses. Examine this device and devices towards the root bridge for STP issues." ::= { tstpTraps 8 } tmnxSvcTopoChgSdpBindMajorState NOTIFICATION-TYPE OBJECTS { custId, svcId, sdpBindId, sdpBindTlsStpPortState, tmnxOldSdpBindTlsStpPortState } STATUS current DESCRIPTION "The tmnxSvcTopoChgSdpBindMajorState notification is generated when a SDP binding has transitioned its state from learning to forwarding or from forwarding to blocking or broken. The spanning tree topology has been modified. It may denote loss of customer access or redundancy. Check the new topology against the provisioned topology to determine the severity of connectivity loss." ::= { tstpTraps 14 } tmnxSvcNewRootSdpBind NOTIFICATION-TYPE OBJECTS { custId, svcId, sdpBindId, svcTlsStpDesignatedRoot } STATUS current DESCRIPTION "The tmnxSvcNewRootSdpBind notification is generated when the previous root bridge has been aged out and a new root bridge has been elected. The new root bridge creates a new spanning tree topology. It may denote loss of customer access or redundancy. Check the new topology against the provisioned topology to determine the severity of connectivity loss." ::= { tstpTraps 15 } tmnxSvcTopoChgSdpBindState NOTIFICATION-TYPE OBJECTS { custId, svcId, sdpBindId, sdpBindTlsStpPortState, tmnxOldSdpBindTlsStpPortState } STATUS current DESCRIPTION "The tmnxSvcTopoChgSdpBindState notification is generated when a SDP binding has transitioned state to blocking or broken from learning state. This event complements what is not covered by tmnxSvcTopoChgSdpBindMajorState. The spanning tree topology has been modified. It may denote loss of customer access or redundancy. Check the new topology against the provisioned topology to determine the severity of connectivity loss." ::= { tstpTraps 16 } tmnxSvcSdpBindRcvdTCN NOTIFICATION-TYPE OBJECTS { custId, svcId, sdpBindId } STATUS current DESCRIPTION "The tmnxSvcSdpBindRcvdTCN notification is generated when a SDP binding has received TCN from another bridge. This bridge will either have its configured BPDU with the topology change flag set if it is a root bridge, or it will pass TCN to its root bridge. Eventually the address aging timer for the forwarding database will be made shorter for a short period of time. No recovery is needed." ::= { tstpTraps 17 } tmnxSvcSdpBindRcvdHigherBriPrio NOTIFICATION-TYPE OBJECTS { custId, svcId, sdpBindId, tmnxCustomerBridgeId, tmnxCustomerRootBridgeId } STATUS current DESCRIPTION "The tmnxSvcSdpBindRcvdHigherBriPrio notification is generated when a customer's device has been configured with a bridge priority equal to zero. The SDP binding that the customer's device is connected through will be blocked. Remove the customer's device or reconfigure the customer's bridge priority with value greater than zero." ::= { tstpTraps 18 } tmnxSvcSdpBindEncapPVST NOTIFICATION-TYPE OBJECTS { custId, svcId, sdpBindId, tmnxOtherBridgeId } STATUS current DESCRIPTION "The tmnxSvcSdpBindEncapPVST notification is generated when an SDP bindings STP received a BPDU that was PVST encapsulated. The SDP binding STP's BPDUs will be PVST encapsulated. No recovery is needed." ::= { tstpTraps 19 } tmnxSvcSdpBindEncapDot1d NOTIFICATION-TYPE OBJECTS { custId, svcId, sdpBindId, tmnxOtherBridgeId } STATUS current DESCRIPTION "The tmnxSvcSdpBindEncapDot1d notification is generated when a SDP binding received a BPDU that was 802.1d encapsulated. The SDP binding BPDUs will also be 802.1d encapsulated. No recovery is needed." ::= { tstpTraps 20 } tmnxSvcSdpActiveProtocolChange NOTIFICATION-TYPE OBJECTS { custId, svcId, sdpBindId, sdpBindTlsStpOperProtocol } STATUS current DESCRIPTION "The tmnxSvcSdpActiveProtocolChange notification is generated when the spanning tree protocol on this SDP changes from rstp to stp or vise versa. No recovery is needed." ::= { tstpTraps 31 } tmnxStpMeshNotInMstRegion NOTIFICATION-TYPE OBJECTS { svcId, sdpBindId } STATUS current DESCRIPTION "The tmnxStpMeshNotInMstRegion notification is generated when a MSTP BPDU from outside the MST region is received on the indicated mesh SDP. It is up to the operator to make sure bridges connected via mesh SDPs are in the same MST-region. If not the mesh will NOT become operational." ::= { tstpTraps 36 } tmnxSdpBndStpExcepCondStateChng NOTIFICATION-TYPE OBJECTS { custId, svcId, sdpBindId, sdpBindTlsStpException } STATUS current DESCRIPTION "The tmnxSdpBndStpExcepCondStateChng notification is generated when the value of the object sdpBindTlsStpException has changed, i.e. when the exception condition changes on the indicated SDP Bind." ::= { tstpTraps 38 } -- ---------------------------------------------------------------------------- -- Conformance Information -- ---------------------------------------------------------------------------- tmnxSdpCompliances OBJECT IDENTIFIER ::= { tmnxSdpConformance 1 } tmnxSdpGroups OBJECT IDENTIFIER ::= { tmnxSdpConformance 2 } -- ---------------------------------------------- -- Compliance Statements -- ---------------------------------------------- tmnxSdp77x0V6v0Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for management of services SDPs on Alcatel 7750 SR and 7710 SR series systems." MODULE -- this module MANDATORY-GROUPS { tmnxSdpV6v0Group, tmnxSdpBindV6v0Group, tmnxSdpBindTlsV6v0Group, tmnxSdpBindMeshV6v0Group, tmnxSdpApipeV6v0Group, tmnxSdpBindDhcpV6v0Group, tmnxSdpBindIpipeV6v0Group, tmnxSdpBindTlsL2ptV6v0Group, tmnxSdpAutoBindV6v0Group, tmnxSdpBindTlsMrpV6v0Group, tmnxSdpTlsBgpV6v0Group, tmnxSdpNotifyV6v0Group, tmnxSdpL2V6v0Group, tmnxSdpFCV6v0Group, tmnxSdpBindCpipeV6v0Group } ::= { tmnxSdpCompliances 8 } tmnxSdp7450V6v0Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for management of services SDPs on Alcatel 7450 ESS series systems." MODULE -- this module MANDATORY-GROUPS { tmnxSdpV6v0Group, tmnxSdpBindV6v0Group, tmnxSdpBindTlsV6v0Group, tmnxSdpBindMeshV6v0Group, -- tmnxSdpApipeV6v0Group, tmnxSdpBindDhcpV6v0Group, tmnxSdpBindIpipeV6v0Group, tmnxSdpBindTlsL2ptV6v0Group, tmnxSdpAutoBindV6v0Group, tmnxSdpBindTlsMrpV6v0Group, tmnxSdpTlsBgpV6v0Group, tmnxSdpNotifyV6v0Group, tmnxSdpL2V6v0Group, tmnxSdpFCV6v0Group -- tmnxSdpBindCpipeV6v0Group } ::= { tmnxSdpCompliances 9 } -- Object groups tmnxSdpV6v0Group OBJECT-GROUP OBJECTS { sdpNumEntries, sdpNextFreeId, sdpId, sdpRowStatus, sdpDelivery, sdpFarEndIpAddress, sdpLspList, sdpDescription, sdpLabelSignaling, sdpAdminStatus, sdpOperStatus, sdpOperPathMtu, sdpKeepAliveAdminStatus, sdpKeepAliveOperStatus, sdpKeepAliveHelloTime, sdpKeepAliveMaxDropCount, sdpKeepAliveHoldDownTime, sdpLastMgmtChange, sdpKeepAliveNumHelloRequestMessages, sdpKeepAliveNumHelloResponseMessages, sdpKeepAliveNumLateHelloResponseMessages, sdpKeepAliveHelloRequestTimeout, sdpLdpEnabled, sdpVlanVcEtype, sdpAdvertisedVllMtuOverride, sdpOperFlags, sdpLastStatusChange, sdpMvplsMgmtService, sdpMvplsMgmtSdpBndId, sdpCollectAcctStats, sdpAccountingPolicyId, sdpClassFwdingEnabled, sdpClassFwdingDefaultLsp, sdpClassFwdingMcLsp, sdpMetric, sdpAutoSdp, sdpSnmpAllowed, sdpPBBEtype, sdpBandwidthBookingFactor, sdpOperBandwidth, sdpAvailableBandwidth, sdpAdminPathMtu, sdpKeepAliveHelloMessageLength } STATUS current DESCRIPTION "The group of objects supporting SDP base feature on Alcatel 7x50 SR series systems." ::= { tmnxSdpGroups 100 } tmnxSdpBindV6v0Group OBJECT-GROUP OBJECTS { sdpBindId, sdpBindRowStatus, sdpBindAdminStatus, sdpBindOperStatus, sdpBindLastMgmtChange, sdpBindType, sdpBindIngressMacFilterId, sdpBindIngressIpFilterId, sdpBindEgressMacFilterId, sdpBindEgressIpFilterId, sdpBindVpnId, sdpBindCustId, sdpBindVcType, sdpBindVlanVcTag, sdpBindSplitHorizonGrp, sdpBindOperFlags, sdpBindLastStatusChange, sdpBindIesIfIndex, sdpBindMacPinning, sdpBindIngressIpv6FilterId, sdpBindEgressIpv6FilterId, sdpBindCollectAcctStats, sdpBindAccountingPolicyId, sdpBindPwPeerStatusBits, sdpBindPeerVccvCvBits, sdpBindPeerVccvCcBits, sdpBindControlWordBit, sdpBindOperControlWord, sdpBindEndPoint, sdpBindEndPointPrecedence, sdpBindIsICB, sdpBindPwFaultInetAddressType, sdpBindClassFwdingOperState, sdpBindForceVlanVcForwarding, sdpBindAdminBandwidth, sdpBindOperBandwidth, sdpBindBaseStatsIngressForwardedPackets, sdpBindBaseStatsIngressDroppedPackets, sdpBindBaseStatsEgressForwardedPackets, sdpBindBaseStatsEgressForwardedOctets, sdpBindBaseStatsCustId, sdpBindBaseStatsIngFwdOctets, sdpBindBaseStatsIngDropOctets, sdpBindAdminIngressLabel, sdpBindAdminEgressLabel, sdpBindOperIngressLabel, sdpBindOperEgressLabel, sdpBindPwFaultInetAddress, sdpBindIpipeCeInetAddress } STATUS current DESCRIPTION "The group of objects supporting SDP Bind feature on Alcatel 7x50 SR series systems." ::= { tmnxSdpGroups 101 } tmnxSdpBindTlsV6v0Group OBJECT-GROUP OBJECTS { sdpBindTlsStpAdminStatus, sdpBindTlsStpPriority, sdpBindTlsStpPortNum, sdpBindTlsStpPathCost, sdpBindTlsStpRapidStart, sdpBindTlsStpBpduEncap, sdpBindTlsStpPortState, sdpBindTlsStpDesignatedBridge, sdpBindTlsStpDesignatedPort, sdpBindTlsStpForwardTransitions, sdpBindTlsStpInConfigBpdus, sdpBindTlsStpInTcnBpdus, sdpBindTlsStpInBadBpdus, sdpBindTlsStpOutConfigBpdus, sdpBindTlsStpOutTcnBpdus, sdpBindTlsStpOperBpduEncap, sdpBindTlsStpVpnId, sdpBindTlsStpCustId, sdpBindTlsMacAddressLimit, sdpBindTlsNumMacAddresses, sdpBindTlsNumStaticMacAddresses, sdpBindTlsMacLearning, sdpBindTlsMacAgeing, sdpBindTlsStpOperEdge, sdpBindTlsStpAdminPointToPoint, sdpBindTlsStpPortRole, sdpBindTlsStpAutoEdge, sdpBindTlsStpOperProtocol, sdpBindTlsStpInRstBpdus, sdpBindTlsStpOutRstBpdus, sdpBindTlsLimitMacMove, sdpBindTlsDiscardUnknownSource, sdpBindTlsMvplsPruneState, sdpBindTlsMvplsMgmtService, sdpBindTlsMvplsMgmtSdpBndId, sdpBindTlsStpException, sdpBindTlsL2ptTermination, sdpBindTlsBpduTranslation, sdpBindTlsStpRootGuard, sdpBindTlsStpInMstBpdus, sdpBindTlsStpOutMstBpdus, sdpBindTlsStpRxdDesigBridge, sdpBindTlsMacMoveNextUpTime, sdpBindTlsMacMoveRateExcdLeft, sdpBindTlsLimitMacMoveLevel, sdpBindTlsBpduTransOper, sdpBindTlsL2ptProtocols, sdpBindTlsIgnoreStandbySig, sdpBindTlsBlockOnMeshFail } STATUS current DESCRIPTION "The group of objects supporting SDP Bind TLS feature on Alcatel 7x50 SR series systems." ::= { tmnxSdpGroups 102 } tmnxSdpBindMeshV6v0Group OBJECT-GROUP OBJECTS { sdpBindMeshTlsPortState, sdpBindMeshTlsNotInMstRegion, sdpBindMeshTlsHoldDownTimer, sdpBindMeshTlsTransitionState } STATUS current DESCRIPTION "The group of objects supporting mesh SDP bind feature on Alcatel 7x50 SR series systems." ::= { tmnxSdpGroups 103 } tmnxSdpApipeV6v0Group OBJECT-GROUP OBJECTS { sdpBindApipeAdminConcatCellCount, sdpBindApipeSigConcatCellCount, sdpBindApipeOperConcatCellCount, sdpBindApipeConcatMaxDelay, sdpBindApipeConcatCellClp, sdpBindApipeConcatCellAal5Fr } STATUS current DESCRIPTION "The group of objects supporting SDP A-Pipe feature on Alcatel 7x50 SR series systems." ::= { tmnxSdpGroups 104 } tmnxSdpBindDhcpV6v0Group OBJECT-GROUP OBJECTS { sdpBindDhcpDescription, sdpBindDhcpSnoop, sdpBindDhcpStatsClntSnoopdPckts, sdpBindDhcpStatsSrvrSnoopdPckts, sdpBindDhcpStatsClntForwdPckts, sdpBindDhcpStatsSrvrForwdPckts, sdpBindDhcpStatsClntDropdPckts, sdpBindDhcpStatsSrvrDropdPckts, sdpBindDhcpStatsClntProxRadPckts, sdpBindDhcpStatsClntProxLSPckts, sdpBindDhcpStatsGenReleasePckts, sdpBindDhcpStatsGenForceRenPckts } STATUS current DESCRIPTION "The group of objects supporting SDP Bind DHCP feature on Alcatel 7x50 SR series systems." ::= { tmnxSdpGroups 105 } tmnxSdpBindIpipeV6v0Group OBJECT-GROUP OBJECTS { sdpBindIpipeCeInetAddressType } STATUS current DESCRIPTION "The group of objects supporting SDP Bind I-Pipe feature on Alcatel 7x50 SR series systems." ::= { tmnxSdpGroups 106 } tmnxSdpFCV6v0Group OBJECT-GROUP OBJECTS { sdpFCMappingRowStatus, sdpFCMappingLspId } STATUS current DESCRIPTION "The group of objects supporting SDP FC feature on Alcatel 7x50 SR series systems." ::= { tmnxSdpGroups 107 } tmnxSdpBindCpipeV6v0Group OBJECT-GROUP OBJECTS { sdpBindCpipeLocalPayloadSize, sdpBindCpipePeerPayloadSize, sdpBindCpipeLocalBitrate, sdpBindCpipePeerBitrate, sdpBindCpipeLocalSigPkts, sdpBindCpipePeerSigPkts, sdpBindCpipeLocalCasTrunkFraming, sdpBindCpipePeerCasTrunkFraming, sdpBindCpipeLocalUseRtpHeader, sdpBindCpipePeerUseRtpHeader, sdpBindCpipeLocalDifferential, sdpBindCpipePeerDifferential, sdpBindCpipeLocalTimestampFreq, sdpBindCpipePeerTimestampFreq } STATUS current DESCRIPTION "The group of objects supporting SDP bind C-Pipe feature on Alcatel 7x50 SR series systems." ::= { tmnxSdpGroups 108 } tmnxSdpBindTlsL2ptV6v0Group OBJECT-GROUP OBJECTS { sdpBindTlsMfibMdaRowStatus, sdpBindTlsL2ptStatsLastClearedTime, sdpBindTlsL2ptStatsL2ptEncapStpConfigBpdusRx, sdpBindTlsL2ptStatsL2ptEncapStpConfigBpdusTx, sdpBindTlsL2ptStatsL2ptEncapStpRstBpdusRx, sdpBindTlsL2ptStatsL2ptEncapStpRstBpdusTx, sdpBindTlsL2ptStatsL2ptEncapStpTcnBpdusRx, sdpBindTlsL2ptStatsL2ptEncapStpTcnBpdusTx, sdpBindTlsL2ptStatsL2ptEncapPvstConfigBpdusRx, sdpBindTlsL2ptStatsL2ptEncapPvstConfigBpdusTx, sdpBindTlsL2ptStatsL2ptEncapPvstRstBpdusRx, sdpBindTlsL2ptStatsL2ptEncapPvstRstBpdusTx, sdpBindTlsL2ptStatsL2ptEncapPvstTcnBpdusRx, sdpBindTlsL2ptStatsL2ptEncapPvstTcnBpdusTx, sdpBindTlsL2ptStatsStpConfigBpdusRx, sdpBindTlsL2ptStatsStpConfigBpdusTx, sdpBindTlsL2ptStatsStpRstBpdusRx, sdpBindTlsL2ptStatsStpRstBpdusTx, sdpBindTlsL2ptStatsStpTcnBpdusRx, sdpBindTlsL2ptStatsStpTcnBpdusTx, sdpBindTlsL2ptStatsPvstConfigBpdusRx, sdpBindTlsL2ptStatsPvstConfigBpdusTx, sdpBindTlsL2ptStatsPvstRstBpdusRx, sdpBindTlsL2ptStatsPvstRstBpdusTx, sdpBindTlsL2ptStatsPvstTcnBpdusRx, sdpBindTlsL2ptStatsPvstTcnBpdusTx, sdpBindTlsL2ptStatsOtherBpdusRx, sdpBindTlsL2ptStatsOtherBpdusTx, sdpBindTlsL2ptStatsOtherL2ptBpdusRx, sdpBindTlsL2ptStatsOtherL2ptBpdusTx, sdpBindTlsL2ptStatsOtherInvalidBpdusRx, sdpBindTlsL2ptStatsOtherInvalidBpdusTx, sdpBindTlsL2ptStatsL2ptEncapCdpBpdusRx, sdpBindTlsL2ptStatsL2ptEncapCdpBpdusTx, sdpBindTlsL2ptStatsL2ptEncapVtpBpdusRx, sdpBindTlsL2ptStatsL2ptEncapVtpBpdusTx, sdpBindTlsL2ptStatsL2ptEncapDtpBpdusRx, sdpBindTlsL2ptStatsL2ptEncapDtpBpdusTx, sdpBindTlsL2ptStatsL2ptEncapPagpBpdusRx, sdpBindTlsL2ptStatsL2ptEncapPagpBpdusTx, sdpBindTlsL2ptStatsL2ptEncapUdldBpdusRx, sdpBindTlsL2ptStatsL2ptEncapUdldBpdusTx, sdpBindTlsL2ptStatsCdpBpdusRx, sdpBindTlsL2ptStatsCdpBpdusTx, sdpBindTlsL2ptStatsVtpBpdusRx, sdpBindTlsL2ptStatsVtpBpdusTx, sdpBindTlsL2ptStatsDtpBpdusRx, sdpBindTlsL2ptStatsDtpBpdusTx, sdpBindTlsL2ptStatsPagpBpdusRx, sdpBindTlsL2ptStatsPagpBpdusTx, sdpBindTlsL2ptStatsUdldBpdusRx, sdpBindTlsL2ptStatsUdldBpdusTx } STATUS current DESCRIPTION "The group of objects supporting SDP bind L2pt feature on Alcatel 7x50 SR series systems." ::= { tmnxSdpGroups 109 } tmnxSdpAutoBindV6v0Group OBJECT-GROUP OBJECTS { pwTemplateTableLastChanged, pwTemplateRowStatus, pwTemplateLastChanged, pwTemplateVcType, pwTemplateAccountingPolicyId, pwTemplateCollectAcctStats, pwTemplateMacLearning, pwTemplateMacAgeing, pwTemplateDiscardUnknownSource, pwTemplateLimitMacMove, pwTemplateMacPinning, pwTemplateMacAddressLimit, pwTemplateShgName, pwTemplateShgDescription, pwTemplateShgRestProtSrcMac, pwTemplateShgRestUnprotDstMac, pwTemplateEgressMacFilterId, pwTemplateEgressIpFilterId, pwTemplateEgressIpv6FilterId, pwTemplateIngressMacFilterId, pwTemplateIngressIpFilterId, pwTemplateIngressIpv6FilterId, pwTemplateIgmpFastLeave, pwTemplateIgmpImportPlcy, pwTemplateIgmpLastMembIntvl, pwTemplateIgmpMaxNbrGrps, pwTemplateIgmpGenQueryIntvl, pwTemplateIgmpQueryRespIntvl, pwTemplateIgmpRobustCount, pwTemplateIgmpSendQueries, pwTemplateIgmpMcacPolicyName, pwTemplateIgmpMcacPrRsvMndBW, pwTemplateIgmpMcacUnconstBW, pwTemplateIgmpVersion, pwTemplateIgmpSnpgGrpSrcTblLC, pwTemplateIgmpSnpgRowStatus, pwTemplateIgmpSnpgLastChngd, pwTemplateMfibAllowedMdaTblLC, pwTemplateMfibMdaRowStatus, pwTemplateUseProvisionedSdp, pwTemplateVlanVcTag, sdpAutoBindBgpInfoTableLC, sdpAutoBindBgpInfoTemplateId, sdpAutoBindBgpInfoAGI, sdpAutoBindBgpInfoSAII, sdpAutoBindBgpInfoTAII } STATUS current DESCRIPTION "The group of objects supporting SDP auto-bind feature on Alcatel 7x50 SR series systems." ::= { tmnxSdpGroups 112 } tmnxSdpBindTlsMrpV6v0Group OBJECT-GROUP OBJECTS { sdpBindTlsMrpTableLastChanged, sdpBindTlsMrpLastChngd, sdpBindTlsMrpJoinTime, sdpBindTlsMrpLeaveTime, sdpBindTlsMrpLeaveAllTime, sdpBindTlsMrpPeriodicTime, sdpBindTlsMrpPeriodicEnabled, sdpBindTlsMrpRxPdus, sdpBindTlsMrpDroppedPdus, sdpBindTlsMrpTxPdus, sdpBindTlsMrpRxNewEvent, sdpBindTlsMrpRxJoinInEvent, sdpBindTlsMrpRxInEvent, sdpBindTlsMrpRxJoinEmptyEvent, sdpBindTlsMrpRxEmptyEvent, sdpBindTlsMrpRxLeaveEvent, sdpBindTlsMrpTxNewEvent, sdpBindTlsMrpTxJoinInEvent, sdpBindTlsMrpTxInEvent, sdpBindTlsMrpTxJoinEmptyEvent, sdpBindTlsMrpTxEmptyEvent, sdpBindTlsMrpTxLeaveEvent, sdpBindTlsMmrpDeclared, sdpBindTlsMmrpRegistered } STATUS current DESCRIPTION "The group of objects supporting SDP MRP feature on Alcatel 7x50 SR series systems." ::= { tmnxSdpGroups 113 } tmnxSdpTlsBgpV6v0Group OBJECT-GROUP OBJECTS { svcTlsBgpADPWTempBindTblLC, svcTlsBgpADPWTempBindRowStatus, svcTlsBgpADPWTempBindLastChngd, svcTlsBgpADPWTempBindSHG, svcTlsBgpADPWTempBindRTTblLC, svcTlsBgpADPWTempBindRTRowStat } STATUS current DESCRIPTION "The group of objects supporting SDP BGP feature on Alcatel 7x50 SR series systems." ::= { tmnxSdpGroups 114 } tmnxSdpL2V6v0Group OBJECT-GROUP OBJECTS { sdpCreationOrigin, svcL2RteTableLastChanged, svcL2RteSdpBindId, svcL2RtePwTemplateId } STATUS current DESCRIPTION "The group of objects supporting SDP L2 Route feature on Alcatel 7x50 SR series systems." ::= { tmnxSdpGroups 115 } -- Notification objects tmnxSdpNotifyObjsV6v0Group OBJECT-GROUP OBJECTS { sdpNotifySdpId, sdpMaxBookableBandwidth, sdpBookedBandwidth, dynamicSdpStatus, dynamicSdpOrigin, dynamicSdpCreationError, dynamicSdpBindCreationError } STATUS current DESCRIPTION "The group of objects supporting SDP notification objects on Alcatel 7x50 SR series systems." ::= { tmnxSdpGroups 200 } -- Obsoleted Group (300) -- Notification group tmnxSdpNotifyV6v0Group NOTIFICATION-GROUP NOTIFICATIONS { unacknowledgedTCN, tmnxSvcTopoChgSdpBindMajorState, tmnxSvcNewRootSdpBind, tmnxSvcTopoChgSdpBindState, tmnxSvcSdpBindRcvdTCN, tmnxSvcSdpBindRcvdHigherBriPrio, tmnxSvcSdpBindEncapPVST, tmnxSvcSdpBindEncapDot1d, tmnxSvcSdpActiveProtocolChange, tmnxStpMeshNotInMstRegion, tmnxSdpBndStpExcepCondStateChng, sdpStatusChanged, sdpBindStatusChanged, sdpTlsMacAddrLimitAlarmRaised, sdpTlsMacAddrLimitAlarmCleared, sdpBindDHCPLeaseEntriesExceeded, sdpBindDHCPLseStateOverride, sdpBindDHCPLseStatePopulateErr, sdpBindDHCPSuspiciousPcktRcvd, sdpBindPwPeerStatusBitsChanged, sdpBindTlsMacMoveExceeded, sdpBindPwPeerFaultAddrChanged, sdpBindDHCPProxyServerError, sdpBindSdpStateChangeProcessed, sdpBindDHCPLseStateMobilityErr, sdpBandwidthOverbooked, sdpBindInsufficientBandwidth, dynamicSdpConfigChanged, dynamicSdpBindConfigChanged, dynamicSdpCreationFailed, dynamicSdpBindCreationFailed } STATUS current DESCRIPTION "The group of SDP notifications on Alcatel 7x50 SR series systems." ::= { tmnxSdpGroups 400 } tmnxSdpObsoletedNotifyV6v0Group NOTIFICATION-GROUP NOTIFICATIONS { sdpCreated, sdpDeleted, sdpBindCreated, sdpBindDeleted, sdpTlsDHCPSuspiciousPcktRcvd, sdpBindDHCPCoAError, sdpBindDHCPSubAuthError } STATUS current DESCRIPTION "The group of obsoleted SDP objects on Alcatel 7x50 SR series systems." ::= { tmnxSdpGroups 401 } END