ALCATEL-IND1-TIMETRA-VRTR-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Unsigned32, IpAddress, TimeTicks, Integer32, Gauge32, Counter32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF TEXTUAL-CONVENTION, DisplayString, RowStatus, TruthValue, MacAddress, TimeStamp, TestAndIncr FROM SNMPv2-TC InetAddress, InetAddressType, InetAddressPrefixLength, InetAddressIPv6z, InetAddressIPv6 FROM INET-ADDRESS-MIB InterfaceIndex, InterfaceIndexOrZero FROM IF-MIB -- ALACTEL CHANG -- ipCidrRouteEntry, inetCidrRouteEntry FROM IP-FORWARD-MIB ipCidrRouteEntry FROM IP-FORWARD-MIB -- ^^^^^^^^^^^^^^^^^^^ -- ALACTEL CHANG -- ALCATEL CHANG -- ipNetToMediaEntry, ipNetToPhysicalEntry FROM IP-MIB ipNetToMediaEntry FROM IP-MIB -- ^^^^^^^^^^^^^^^^^^^^^ -- ALCATEL CHANG TmnxVRtrID, IpAddressPrefixLength, TmnxBgpAutonomousSystem, TmnxVRtrIDOrZero, TmnxAdminState, TmnxOperState, TmnxStatus, TmnxPortID, TmnxEncapVal, TNamedItem, TNamedItemOrEmpty, TItemDescription, TItemLongDescription, TmnxServId, TmnxCustId, TmnxTunnelType, TmnxTunnelID, TPolicyStatementNameOrEmpty, TmnxVPNRouteDistinguisher, TCpmProtPolicyID, TDSCPValue, TDSCPValueOrNone, TFCType, TmnxDHCP6MsgType, Dot1PPriority FROM ALCATEL-IND1-TIMETRA-TC-MIB timetraSRMIBModules, tmnxSRObjs, tmnxSRNotifyPrefix, tmnxSRConfs FROM ALCATEL-IND1-TIMETRA-GLOBAL-MIB TNetworkPolicyID FROM ALCATEL-IND1-TIMETRA-QOS-MIB TIPFilterID, TFilterID FROM ALCATEL-IND1-TIMETRA-FILTER-MIB TmnxSlotNum FROM ALCATEL-IND1-TIMETRA-CHASSIS-MIB tmnxPortNotifyPortId, tmnxPortType FROM ALCATEL-IND1-TIMETRA-PORT-MIB svcDhcpLseStateNewCiAddr, svcDhcpLseStateNewChAddr, svcDhcpClientLease FROM ALCATEL-IND1-TIMETRA-SERV-MIB sapPortId, sapEncapValue FROM ALCATEL-IND1-TIMETRA-SAP-MIB ; timetraVRtrMIBModule MODULE-IDENTITY LAST-UPDATED "0801010000Z" ORGANIZATION "Alcatel" CONTACT-INFO "Alcatel 7x50 Support Web: http://www.alcatel.com/comps/pages/carrier_support.jhtml" DESCRIPTION "This document is the SNMP MIB module to manage and provision the Alcatel 7x50 device transport and virtual routers, their interfaces, and other related features. Copyright 2003-2008 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel's proprietary intellectual property. Alcatel retains all title and ownership in the Specification, including any revisions. Alcatel grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied `as is', and Alcatel makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification." -- -- Revision History -- REVISION "0801010000Z" DESCRIPTION "Rev 6.0 01 Jan 2008 00:00 6.0 release of the TIMETRA-VRTR-MIB." REVISION "0701010000Z" DESCRIPTION "Rev 5.0 01 Jan 2007 00:00 5.0 release of the TIMETRA-VRTR-MIB." REVISION "0602280000Z" DESCRIPTION "Rev 4.0 28 Feb 2006 00:00 4.0 release of the TIMETRA-VRTR-MIB." REVISION "0508310000Z" DESCRIPTION "Rev 3.0 31 Aug 2005 00:00 3.0 release of the TIMETRA-VRTR-MIB." REVISION "0501240000Z" DESCRIPTION "Rev 2.1 24 Jan 2005 00:00 2.1 release of the TIMETRA-VRTR-MIB." REVISION "0401150000Z" DESCRIPTION "Rev 2.0 15 Jan 2004 00:00 2.0 release of the TIMETRA-VRTR-MIB." REVISION "0308150000Z" DESCRIPTION "Rev 1.2 15 Aug 2003 00:00 1.2 release of the TIMETRA-VRTR-MIB." REVISION "0301200000Z" DESCRIPTION "Rev 1.0 20 Jan 2003 00:00 1.0 Release of the TIMETRA-VRTR-MIB." REVISION "0008140000Z" DESCRIPTION "Rev 0.1 14 Aug 2000 00:00 Initial version of the TIMETRA-VRTR-MIB." ::= { timetraSRMIBModules 3 } tmnxVRtrObjs OBJECT IDENTIFIER ::= { tmnxSRObjs 3 } tmnxVRtrConformance OBJECT IDENTIFIER ::= { tmnxSRConfs 3 } tmnxVRtrNotifyPrefix OBJECT IDENTIFIER ::= { tmnxSRNotifyPrefix 3} tmnxVRtrNotifications OBJECT IDENTIFIER ::= { tmnxVRtrNotifyPrefix 0 } --%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -- -- ALCATEL-IND1-TIMETRA-VRTR-MIB textual conventions -- TmnxVPNId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The purpose of a VPN-ID is to identify a VPN. The global VPN Identifier format is: 3-octet VPN Authority, organizationally unique ID followed by a 4-octet VPN index identifying the VPN according to OUI." REFERENCE "RFC 2685, Fox & Gleeson, 'Virtual Private Networks Identifier', September 1999." SYNTAX OCTET STRING (SIZE (0..7)) TmnxInetAddrState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxInetAddrState is the state of an ipv6 address." SYNTAX INTEGER { unknown (0), tentative (1), duplicated (2), inaccessible (3), deprecated (4), preferred (5) } TDSCPAppId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "DSCP Application identifiers for protocols that generate control traffic on the the Alcatel 7x50 SR router." SYNTAX INTEGER { bgp (1), cflowd (2), dhcp (3), dns (4), ftp (5), icmp (6), igmp (7), ldp (8), mld (9), msdp (10), ndis (11), ntp (12), ospf (13), pim (14), radius (15), rip (16), rsvp (17), snmp (18), snmp-notification (19), srrp (20), ssh (21), syslog (22), tacplus (23), telnet (24), tftp (25), traceroute (26), vrrp (27) } TDot1pAppId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "IEEE 802.1p priority (Dot1p) Application identifiers for Layer-2 protocols that generate control traffic on the the Alcatel 7x50 SR router." SYNTAX INTEGER { arp (1), isis (2), pppoe (3) } --%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -- -- The ALcatel 7x50 SR series Virtual Router Group -- -- -- Virtual Router Table -- tmnxVRtrGlobalObjs OBJECT IDENTIFIER ::= { tmnxVRtrObjs 15 } vRtrNextVRtrID OBJECT-TYPE SYNTAX TestAndIncr MAX-ACCESS read-create STATUS current DESCRIPTION "The vRtrNextVRtrID object is used to assign values to vRtrID to be used to create a new row in the vRtrConfTable as described in 'Textual Conventions for SNMPv2'. The network manager reads the object, and then writes the value back in the SET request that creates a new instance of vRtrConfEntry. If the SET fails with the code 'inconsistentValue', then the process must be repeated. If the the SET succeeds, then the object is incremented and the new instance is created according to the manager's directions." ::= { tmnxVRtrGlobalObjs 1 } vRtrConfiguredVRtrs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrConfiguredVRtrs indicates the current number of virtual routers configured in the system and represented as rows in the vRtrConfTable." ::= { tmnxVRtrGlobalObjs 2 } vRtrActiveVRtrs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrActiveVRtrs indicates the current number of virtual routers in the system with vRtrAdminStatus equal 'inService'." ::= { tmnxVRtrGlobalObjs 3 } vRtrRouteThresholdSoakTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Following the generation of a tmnxVRtrHighRouteTCA notification, the value of vRtrRouteThresholdSoakTime indicates the soak interval in seconds before another tmnxVRtrHighRouteTCA notification will be re-issued. Imposing this soak period prevents continuous generation of notifications by the agent in the event that routes are continually added to a VRF after it has reached its maximum capacity. When this object has a value of 0, it indicates that the agent should issue a single notification at the time that the value of vRtrHighRouteThreshold is exceeded and another notification should not be sent until the number of routes has fallen below the value configured in vRtrMidRouteThreshold." DEFVAL { 600 } -- 10 minutes ::= { tmnxVRtrGlobalObjs 4 } vRtrMaxARPEntries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrMaxARPEntries indicates the maximum number of active and inactive ARP entries supported across all virtual routers in the system." ::= { tmnxVRtrGlobalObjs 5 } vRtrIPv6RouteThresholdSoakTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of object vRtrIPv6RouteThresholdSoakTime specifies the soak interval in seconds before another tmnxVRtrIPv6HighRouteTCA notification will be re-issued, after the generation of a tmnxVRtrIPv6HighRouteTCA notification. Imposing this soak period prevents continuous generation of notifications by the agent, in the event that routes are continually added to a VRF after it has reached its maximum capacity. When this object has a value of 0, it indicates that the agent should issue a single notification at the time that the value of vRtrIPv6HighRouteThreshold is exceeded and another notification should not be sent until the number of routes has fallen below the value configured in vRtrIPv6MidRouteThreshold." DEFVAL { 600 } -- 10 minutes ::= { tmnxVRtrGlobalObjs 6 } vRtrConfTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrConfTable has an entry for each virtual router configured in the system." ::= { tmnxVRtrObjs 1 } vRtrConfEntry OBJECT-TYPE SYNTAX VRtrConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a virtual router in the system. Entries can be created and deleted via SNMP SET operations. Creation requires a SET request containing vRtrRowStatus, vRtrName and vRtrType. Note that rows in this table are usually created by the agent itself as a side affect of some other configuration; for example, when a service vprn is created by setting the appropriate objects in the ALCATEL-IND1-TIMETRA-SERV-MIB. There will always be at least two row entries in this table, one of these entries represents the base or transport router and the other represents the management router. These entries are created when the system is initialized and can never be deleted." INDEX { vRtrID } ::= { vRtrConfTable 1 } VRtrConfEntry ::= SEQUENCE { vRtrID TmnxVRtrID, vRtrRowStatus RowStatus, vRtrAdminState TmnxAdminState, vRtrName TNamedItemOrEmpty, vRtrMaxNumRoutes Integer32, vRtrBgpStatus TmnxStatus, vRtrMplsStatus TmnxStatus, vRtrOspfStatus TmnxStatus, vRtrRipStatus TmnxStatus, vRtrRsvpStatus TmnxStatus, vRtrEcmpMaxRoutes Unsigned32, vRtrAS TmnxBgpAutonomousSystem, vRtrNewIfIndex TestAndIncr, vRtrLdpStatus TmnxStatus, vRtrIsIsStatus TmnxStatus, vRtrRouterId IpAddress, vRtrTriggeredPolicy TruthValue, vRtrConfederationAS TmnxBgpAutonomousSystem, vRtrRouteDistinguisher TmnxVPNRouteDistinguisher, vRtrMidRouteThreshold Unsigned32, vRtrHighRouteThreshold Unsigned32, vRtrIllegalLabelThreshold Unsigned32, vRtrVpnId TmnxVPNId, vRtrDescription TItemDescription, vRtrGracefulRestart TruthValue, vRtrGracefulRestartType INTEGER, vRtrType INTEGER, vRtrServiceId TmnxServId, vRtrCustId TmnxCustId, vRtrIgmpStatus TmnxStatus, vRtrMaxNumRoutesLogOnly TruthValue, vRtrVrfTarget TNamedItemOrEmpty, vRtrVrfExportTarget TNamedItemOrEmpty, vRtrVrfImportTarget TNamedItemOrEmpty, vRtrPimStatus TmnxStatus, vRtrMaxMcastNumRoutes Integer32, vRtrMaxMcastNumRoutesLogOnly TruthValue, vRtrMcastMidRouteThreshold Unsigned32, vRtrIgnoreIcmpRedirect TruthValue, vRtrOspfv3Status TmnxStatus, vRtrMsdpStatus TmnxStatus, vRtrVprnType INTEGER, vRtrSecondaryVrfId TmnxVRtrIDOrZero, vRtrMldStatus TmnxStatus, vRtrIPv6MaxNumRoutes Integer32, vRtrIPv6MidRouteThreshold Unsigned32, vRtrIPv6HighRouteThreshold Unsigned32, vRtrIPv6MaxNumRoutesLogOnly TruthValue, vRtrIPv6IgnoreIcmpRedirect TruthValue, vRtrMcPathMgmtPlcyName TNamedItem } vRtrID OBJECT-TYPE SYNTAX TmnxVRtrID MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The unique value which identifies this virtual router in the Tmnx system. The vRtrID value for each virtual router must remain constant at least from one re-initialization of the system management processor (CPM) to the next. There will always be at least one router entry defined by the agent with vRtrID=1 which represents the transport router." ::= { vRtrConfEntry 1 } vRtrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status. The creation or deletion of a virtual router entry causes creation or deletion of corresponding entries in other Tmnx MIB tables with the same vRtrID value. Note that it is not allowed to 'destroy' the row entry for vRtrID = 1. In order for row creation to succeed, values for vRtrName and vRtrType must be included in the same SNMP SET PDU as vRtrRowStatus." ::= { vRtrConfEntry 2 } vRtrAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The desired administrative state for this virtual router. Note that it is not allowed to set vRtrAdminState to 'outOfService for the row entry with vRtrID = 1." DEFVAL { outOfService } ::= { vRtrConfEntry 3 } vRtrName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The administritive name for this virtual router. The router name must be unique among all virtual routers in the system. When a row is created in the vRtrConfTable for a service vprn, the agent assigns the name 'VR-'. Note that for row creation to succeed, a value must be specified for vRtrName." ::= { vRtrConfEntry 4 } vRtrMaxNumRoutes OBJECT-TYPE SYNTAX Integer32 (-1..'7FFFFFFF'h) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of routes that can be configured on this virtual router. If the value is -1, then there is no limit." DEFVAL { -1 } ::= { vRtrConfEntry 5 } vRtrBgpStatus OBJECT-TYPE SYNTAX TmnxStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The desired state for BGP on this virtual router. An attempt to set vRtrBgpStatus to 'delete' will fail if the BGP protocol is not in the administrative outOfService state." DEFVAL { delete } ::= { vRtrConfEntry 6 } vRtrMplsStatus OBJECT-TYPE SYNTAX TmnxStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The desired state for MPLS on this virtual router. An attempt to set vRtrMplsStatus to 'delete' will fail if the MPLS protocol is not in the administrative outOfService state, i.e. ALCATEL-IND1-TIMETRA-MPLS-MIB::vRtrMplsGeneralAdminState must be set to 'outOfService'." DEFVAL { delete } ::= { vRtrConfEntry 7 } vRtrOspfStatus OBJECT-TYPE SYNTAX TmnxStatus MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The desired state for OSPFv2 on this virtual router. An attempt to set vRtrOspfStatus to 'delete' will fail if the OSPFv2 protocol is not in the administrative outOfService state, i.e. TIMETRA-OSPF-NG-MIB::tmnxOspfAdminState must be set to 'disabled'. This object was obsoleted in release 5.0." DEFVAL { delete } ::= { vRtrConfEntry 8 } vRtrRipStatus OBJECT-TYPE SYNTAX TmnxStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The desired state for RIP on this virtual router. An attempt to set vRtrRipStatus to 'delete' will fail if the RIP protocol is not in the admininistrative outOfService state." DEFVAL { delete } ::= { vRtrConfEntry 9 } vRtrRsvpStatus OBJECT-TYPE SYNTAX TmnxStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The desired state for RSVP on this virtual router. An attempt to set vRtrRsvpStatus to 'delete' will fail if the RSVP protocol is not in the administrative outOfService state, i.e. TIMETRA-RSVP-MIB::vRtrRsvpGeneralAdminState must be set to 'outOfService'." DEFVAL { delete } ::= { vRtrConfEntry 10 } vRtrEcmpMaxRoutes OBJECT-TYPE SYNTAX Unsigned32 (0..16) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrEcmpMaxRoutes specifies the maximum number of equal cost routes allowed on this routing table instance. When the number ecmp routes available at the best preference value exceed the number of vRtrEcmpMaxRoutes allowed, then the lowest next-hop IP address algorithm is used to select the ecmp routes used. When vRtrEcmpMaxRoutes is set to zero (0), and multiple routes are available with the same best preference value and equal cost values, then the route with the lowest next-hop IP address is used." DEFVAL { 1 } ::= { vRtrConfEntry 11 } vRtrAS OBJECT-TYPE SYNTAX TmnxBgpAutonomousSystem MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrAS specifies the autonomous system number to be advertised to this peer. This object is MUST be set before BGP can be activated." REFERENCE "" DEFVAL { 0 } ::= { vRtrConfEntry 12 } vRtrNewIfIndex OBJECT-TYPE SYNTAX TestAndIncr MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to assign values to vRtrIfIndex as described in 'Textual Conventions for SNMPv2'. The network manager reads the object, and then writes the value back in the SET request that creates a new instance of vRtrIfEntry. If the SET fails with the code 'inconsistentValue', then the process must be repeated. If the the SET succeeds, then the object is incremented and the new instance is created according to the manager's directions." ::= { vRtrConfEntry 13 } vRtrLdpStatus OBJECT-TYPE SYNTAX TmnxStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The desired state for LDP on this virtual router. An attempt to set vRtrLdpStatus to 'delete' will fail if the LDP protocol is not in the administrative outOfService state, i.e. ALCATEL-IND1-TIMETRA-LDP-MIB::vRtrLdpGenAdminState must be set to 'outOfService'." DEFVAL { delete } ::= { vRtrConfEntry 14 } vRtrIsIsStatus OBJECT-TYPE SYNTAX TmnxStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The desired state for ISIS on this virtual router. An attempt to set vRtrIsIsStatus to 'delete' will fail if the ISIS protocol is not in the administrative outOfService state." DEFVAL { delete } ::= { vRtrConfEntry 15 } vRtrRouterId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the router's IP interface addresses." ::= { vRtrConfEntry 16 } vRtrTriggeredPolicy OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If the value of vRtrTriggeredPolicy is 'false', all routing protocols automatically reevaluate their routes when the route policies are changed. If this value is 'true', then the user must trigger the recalculation of routes when the route policies are changed." DEFVAL { false } ::= { vRtrConfEntry 17 } vRtrConfederationAS OBJECT-TYPE SYNTAX TmnxBgpAutonomousSystem MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrConfederationAS specifies the confederation AS number for the virtual router. A value of 0 means no confederation AS." DEFVAL { 0 } ::= { vRtrConfEntry 18 } vRtrRouteDistinguisher OBJECT-TYPE SYNTAX TmnxVPNRouteDistinguisher MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrRouteDistinguisher is an identifier attached to routes that distinguishes to which VPN it belongs. The VPRN cannot be operationally 'inService' until a route distinguisher has been assigned." DEFVAL { '0000000000000000'H } ::= { vRtrConfEntry 19 } vRtrMidRouteThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMidRouteThreshold specifies the mid-level water marker for the number of routes which this VRF may hold. When this limit is exceeded a tmnxVRtrMidRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent." DEFVAL { 0 } ::= { vRtrConfEntry 20 } vRtrHighRouteThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrHighRouteThreshold specifies the high-level water marker for the number of routes which this VRF may hold. When this limit is exceeded a tmnxVRtrHighRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent." ::= { vRtrConfEntry 21 } vRtrIllegalLabelThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIllegalLabelThreshold specifies the allowed limit for illegal label violations on this VRF. When this limit is exceeded a tmnxVRtrIllegalLabelTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent." DEFVAL { 0 } ::= { vRtrConfEntry 22 } vRtrVpnId OBJECT-TYPE SYNTAX TmnxVPNId MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVpnId is the Virtual Private Network Identifier of this virtual router." DEFVAL { ''H } -- the empty string ::= { vRtrConfEntry 23 } vRtrDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrDescription is a user provided description string for this virtual router. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length." DEFVAL { ''H } -- the empty string ::= { vRtrConfEntry 25 } vRtrGracefulRestart OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrGracefulRestart indicates whether or not graceful restart capabilities are enabled on this virtual router. In order for any protocol to perform graceful restart vRtrGracefulRestart must have a value of 'true'. Graceful restart capabilities can then be enabled or disabled on an individual protocol basis." DEFVAL { false } ::= { vRtrConfEntry 26 } vRtrGracefulRestartType OBJECT-TYPE SYNTAX INTEGER { never (0), manual (1), automatic (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrGracefulRestartType specifies when to include grace restart of routing protocols as a result of a switchover from primary CPM in a redundant system. 'never' - always switch without graceful restart 'manual' - perform graceful restart only on a forced switchover 'automatic' - perform graceful restart on either a switchover caused by an error or a forced switchover" DEFVAL { never } ::= { vRtrConfEntry 27 } vRtrType OBJECT-TYPE SYNTAX INTEGER { unknown (0), baseRouter (1), vprn (2), vr (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrType specifies the type of virtual router represented by this row entry. When a row is created in this table using 'createAndGo', vRtrType must be specified or the row creation will fail. Only the value of 'vr (3)' can be set with a SNMP SET request. The other values are used for row entries created internally by the agent. The value of vRtrType cannot be modified if vRtrRowStatus has a value of 'active'." ::= { vRtrConfEntry 28 } vRtrServiceId OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS read-only STATUS current DESCRIPTION "When vRtrType has a value of 'vprn', the value of vRtrServiceId indicates the service-id of the associated service that created this row entry." ::= { vRtrConfEntry 29 } vRtrCustId OBJECT-TYPE SYNTAX TmnxCustId MAX-ACCESS read-only STATUS current DESCRIPTION "When vRtrType has a value of 'vprn', the value of vRtrCustId indicates the customer-id of the associated service that created this row entry." ::= { vRtrConfEntry 30 } vRtrIgmpStatus OBJECT-TYPE SYNTAX TmnxStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The desired state for IGMP on this virtual router. An attempt to set vRtrIgmpStatus to 'delete' will fail if the IGMP protocol is not in the administrative outOfService state, i.e. TIMETRA-IGMP-MIB::vRtrIgmpGenAdminState must be set to 'outOfService'." DEFVAL { delete } ::= { vRtrConfEntry 31 } vRtrMaxNumRoutesLogOnly OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMaxNumRoutesLogOnly specifies the action to be taken when the maximum number of routes that can be held within a given VRF context is reached. If the value is 'true' the event is logged (a trap is sent) and the learning of new routes is not disabled. If the value is 'false' the event is logged and the learning of new routes is disabled." DEFVAL { false } ::= { vRtrConfEntry 32 } vRtrVrfTarget OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVrfTarget specifies the extended community name for the default vrf-import or vrf-export policy to use for the vRtrID if no entries are configured in the vRtrPolicyTable for this vRtrID instance. This object can not be set if either vRtrVrfExportTarget or vRtrVrfImportTarget has been set." ::= { vRtrConfEntry 33 } vRtrVrfExportTarget OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVrfExportTarget specifies the extended community name for the default vrf-export policy to use for the vRtrID if no entries are configured in the vRtrPolicyTable for this vRtrID instance. This object can not be set if vRtrVrfTarget has been set." ::= { vRtrConfEntry 34 } vRtrVrfImportTarget OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVrfImportTarget specifies the extended community name for the default vrf-import policy to use for the vRtrID if no entries are configured in the vRtrPolicyTable for this vRtrID instance. This object can not be set if vRtrVrfTarget has been set." ::= { vRtrConfEntry 35 } vRtrPimStatus OBJECT-TYPE SYNTAX TmnxStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The desired state for PIM on this virtual router. When the object is set to 'create', PIM protocol instance is enabled on the virtual router. Setting the value to 'delete' disables PIM on the virtual router." DEFVAL { delete } ::= { vRtrConfEntry 36 } vRtrMaxMcastNumRoutes OBJECT-TYPE SYNTAX Integer32 (-1..'7FFFFFFF'h) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of multicast routes that can be configured on this virtual router. If the value is -1, then there is no limit." DEFVAL { -1 } ::= { vRtrConfEntry 37 } vRtrMaxMcastNumRoutesLogOnly OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMaxMcastNumRoutesLogOnly specifies the action to be taken when the maximum number of multicast routes that can be held within a given VRF context is reached. If the value is 'true' the event is logged (a trap is sent) and the learning of new multicast routes is not disabled. If the value is 'false' the event is logged and the learning of new routes is disabled." DEFVAL { false } ::= { vRtrConfEntry 38 } vRtrMcastMidRouteThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMcastMidRouteThreshold specifies the mid-level water marker for the number of multicast routes which this VRF may hold. When this limit is exceeded a tmnxVRtrMcastMidRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent." DEFVAL { 0 } ::= { vRtrConfEntry 39 } vRtrIgnoreIcmpRedirect OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If the value of vRtrIgnoreIcmpRedirect is 'true', the virtual router will drop all ICMP Redirects received on the management interface. If the value of vRtrIgnoreIcmpRedirect is 'false' and an ICMP Redirect is received on the management interface, a /32 route will be created in the route table. If the value of vRtrName is not 'management', an SNMP set request to vRtrIgnoreIcmpRedirect will fail with an 'inconsistentValue' error." DEFVAL { true } ::= { vRtrConfEntry 40 } vRtrOspfv3Status OBJECT-TYPE SYNTAX TmnxStatus MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The desired state for OSPFv3 on this virtual router. An attempt to set vRtrOspfv3Status to 'delete' will fail if the OSPFv3 protocol is not in the administrative outOfService state, i.e. TIMETRA-OSPF-NG-MIB::tmnxOspfAdminState must be set to 'disabled'. This object was obsoleted in release 5.0." DEFVAL { delete } ::= { vRtrConfEntry 41 } vRtrMsdpStatus OBJECT-TYPE SYNTAX TmnxStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The desired state for Msdp on this virtual router. An attempt to set vRtrMsdpStatus to 'delete' will fail if the Msdp protocol is not in the administrative outOfService state, i.e. TIMETRA-MSDP-MIB::tmnxMsdpAdminState must be set to 'outOfService'." DEFVAL { delete } ::= { vRtrConfEntry 42 } vRtrVprnType OBJECT-TYPE SYNTAX INTEGER { regular (1), hub (2), spoke (3), subscriberSplitHorizon (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVprnType specifies how traffic is routed. regular (1) - All traffic is routed to all destinations. hub (2) - Network traffic is routed only to the access side. Access traffic is routed to all destinations. spoke (3) - Networks traffic is routed to all destinations. Access traffic is routed only to the network side. subscriberSplitHorizon (4) - Subscriber-interface traffic is routed only to the network side. All other traffic is routed to all destinations. This object cannot be modified if vRtrType is not 'vprn'." DEFVAL { regular } ::= { vRtrConfEntry 43 } vRtrSecondaryVrfId OBJECT-TYPE SYNTAX TmnxVRtrIDOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The unique value of vRtrSecondaryVrfId specifies the secondary vrf-id for hub and spoke vprn. Non-zero value of vRtrSecondaryVrfId indicates that two route-tables exist for hub and spoke vprn system one each for hub and spoke. One of which is indexed by vRtrSecondaryVrfId. If the value of vRtrSecondaryVrfId is zero, it indicates that there is only one route-table for hub and spoke vprn system." ::= { vRtrConfEntry 44 } vRtrMldStatus OBJECT-TYPE SYNTAX TmnxStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The desired state for Multicast Listener Discovery (MLD) Protocol on this virtual router. An attempt to set vRtrMldStatus to 'delete' will fail if the MLD protocol is not in the administrative outOfService state, i.e. TIMETRA-MLD-MIB::vRtrMldGenAdminState must be set to 'outOfService'." DEFVAL { delete } ::= { vRtrConfEntry 45 } vRtrIPv6MaxNumRoutes OBJECT-TYPE SYNTAX Integer32 (-1..'7FFFFFFF'h) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of IPv6 routes that can be configured on this virtual router. If the value is -1, then there is no limit. This object is not supported on SR-1, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '5'." DEFVAL { -1 } ::= { vRtrConfEntry 46 } vRtrIPv6MidRouteThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIPv6MidRouteThreshold specifies the mid-level water marker for the number of IPv6 routes which this VRF may hold. When this limit is exceeded a tmnxVRtrIPv6MidRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent." DEFVAL { 0 } ::= { vRtrConfEntry 47 } vRtrIPv6HighRouteThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIPv6HighRouteThreshold specifies the high-level water marker for the number of IPv6 routes which this VRF may hold. When this limit is exceeded a tmnxVRtrIPv6HighRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent." ::= { vRtrConfEntry 48 } vRtrIPv6MaxNumRoutesLogOnly OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIPv6MaxNumRoutesLogOnly specifies the action to be taken when the maximum number of IPv6 routes that can be held within a given VRF context is reached. If the value is 'true' the event is logged (a trap is sent) and the learning of new routes is not disabled. If the value is 'false' the event is logged and the learning of new routes is disabled." DEFVAL { false } ::= { vRtrConfEntry 49 } vRtrIPv6IgnoreIcmpRedirect OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If the value of vRtrIPv6IgnoreIcmpRedirect is 'true', the virtual router will drop all IPv6 ICMP Redirects received on the management interface. If the value of vRtrIPv6IgnoreIcmpRedirect is 'false' and an IPv6 ICMP Redirect is received on the management interface, a /128 route will be created in the route table. If the value of vRtrName is not 'management', an SNMP set request to vRtrIPv6IgnoreIcmpRedirect will fail with an 'inconsistentValue' error." DEFVAL { true } ::= { vRtrConfEntry 50 } vRtrMcPathMgmtPlcyName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMcPathMgmtPlcyName specifies the multicast policy name configured on this virtual router." DEFVAL { "default" } ::= { vRtrConfEntry 51 } -- -- Alcatel 7x50 SR series Virtual Router Policy Table -- -- Augmentation of the vRtrTable. -- Use of AUGMENTS clause implies a one-to-one dependent relationship between -- the base table, vRtrTable, and the augmenting table, vRtrPolicyTable. -- This in effect extends the vRtrTable with additional columns. -- Creation (or deletion) of a row in the vRtrTable results in the same -- fate for the row in the vRtrPolicyTable. -- vRtrPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrPolicyTable has an entry for each virtual router configured in the system." ::= { tmnxVRtrObjs 16 } vRtrPolicyEntry OBJECT-TYPE SYNTAX VRtrPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a collection of statistics for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations." AUGMENTS { vRtrConfEntry } ::= { vRtrPolicyTable 1 } VRtrPolicyEntry ::= SEQUENCE { vRtrImportPolicy1 TPolicyStatementNameOrEmpty, vRtrImportPolicy2 TPolicyStatementNameOrEmpty, vRtrImportPolicy3 TPolicyStatementNameOrEmpty, vRtrImportPolicy4 TPolicyStatementNameOrEmpty, vRtrImportPolicy5 TPolicyStatementNameOrEmpty, vRtrExportPolicy1 TPolicyStatementNameOrEmpty, vRtrExportPolicy2 TPolicyStatementNameOrEmpty, vRtrExportPolicy3 TPolicyStatementNameOrEmpty, vRtrExportPolicy4 TPolicyStatementNameOrEmpty, vRtrExportPolicy5 TPolicyStatementNameOrEmpty } vRtrImportPolicy1 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrImportPolicy1 is the name of the first policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrPolicyEntry 1 } vRtrImportPolicy2 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrImportPolicy2 is the name of the second policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrPolicyEntry 2 } vRtrImportPolicy3 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrImportPolicy3 is the name of the third policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrPolicyEntry 3 } vRtrImportPolicy4 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrImportPolicy4 is the name of the fourth policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrPolicyEntry 4 } vRtrImportPolicy5 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrImportPolicy5 is the name of the fifth policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrPolicyEntry 5 } vRtrExportPolicy1 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrExportPolicy1 is the name of the first policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrPolicyEntry 6 } vRtrExportPolicy2 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrExportPolicy2 is the name of the second policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrPolicyEntry 7 } vRtrExportPolicy3 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrExportPolicy3 is the name of the third policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrPolicyEntry 8 } vRtrExportPolicy4 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrExportPolicy4 is the name of the fourth policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrPolicyEntry 9 } vRtrExportPolicy5 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrExportPolicy4 is the name of the fifth policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrPolicyEntry 10 } -- -- Alcatel 7x50 SR series Virtual Router Statistics Table -- -- Augmentation of the vRtrTable. -- Use of AUGMENTS clause implies a one-to-one dependent relationship between -- the base table, vRtrTable, and the augmenting table, vRtrStatTable. -- This in effect extends the vRtrTable with additional columns. -- Creation (or deletion) of a row in the vRtrTable results in the same -- fate for the row in the vRtrStatTable. -- vRtrStatTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrStatTable has an entry for each virtual router configured in the system." ::= { tmnxVRtrObjs 2 } vRtrStatEntry OBJECT-TYPE SYNTAX VRtrStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a collection of statistics for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations." AUGMENTS { vRtrConfEntry } ::= { vRtrStatTable 1 } VRtrStatEntry ::= SEQUENCE { vRtrOperState TmnxOperState, vRtrDirectRoutes Gauge32, vRtrDirectActiveRoutes Gauge32, vRtrStaticRoutes Gauge32, vRtrStaticActiveRoutes Gauge32, vRtrOSPFRoutes Gauge32, vRtrOSPFActiveRoutes Gauge32, vRtrBGPRoutes Gauge32, vRtrBGPActiveRoutes Gauge32, vRtrISISRoutes Gauge32, vRtrISISActiveRoutes Gauge32, vRtrRIPRoutes Gauge32, vRtrRIPActiveRoutes Gauge32, vRtrAggregateRoutes Gauge32, vRtrAggregateActiveRoutes Gauge32, vRtrStatConfiguredIfs Gauge32, vRtrStatActiveIfs Gauge32, vRtrStatIllegalLabels Counter32, vRtrStatCurrNumRoutes Gauge32, vRtrStatBGPVpnRoutes Gauge32, vRtrStatBGPVpnActiveRoutes Gauge32, vRtrStatTotalLdpTunnels Gauge32, vRtrStatTotalSdpTunnels Gauge32, vRtrStatActiveLdpTunnels Gauge32, vRtrStatActiveSdpTunnels Gauge32, vRtrMulticastRoutes Gauge32, vRtrStatActiveARPEntries Gauge32, vRtrStatTotalARPEntries Gauge32, vRtrV6DirectRoutes Gauge32, vRtrV6DirectActiveRoutes Gauge32, vRtrV6StaticRoutes Gauge32, vRtrV6StaticActiveRoutes Gauge32, vRtrV6OSPFRoutes Gauge32, vRtrV6OSPFActiveRoutes Gauge32, vRtrV6BGPRoutes Gauge32, vRtrV6BGPActiveRoutes Gauge32, vRtrV6ISISRoutes Gauge32, vRtrV6ISISActiveRoutes Gauge32, vRtrV6RIPRoutes Gauge32, vRtrV6RIPActiveRoutes Gauge32, vRtrV6AggregateRoutes Gauge32, vRtrV6AggregateActiveRoutes Gauge32, vRtrV6StatConfiguredIfs Gauge32, vRtrV6StatActiveIfs Gauge32, vRtrV6StatIllegalLabels Counter32, vRtrV6StatCurrNumRoutes Gauge32, vRtrV6StatBGPVpnRoutes Gauge32, vRtrV6StatBGPVpnActiveRoutes Gauge32, vRtrV6StatTotalLdpTunnels Gauge32, vRtrV6StatTotalSdpTunnels Gauge32, vRtrV6StatActiveLdpTunnels Gauge32, vRtrV6StatActiveSdpTunnels Gauge32, vRtrV6MulticastRoutes Gauge32, vRtrV6StatActiveNbrEntries Gauge32, vRtrV6StatTotalNbrEntries Gauge32, vRtrSubMgmtRoutes Gauge32, vRtrSubMgmtActiveRoutes Gauge32, vRtrStatTotalRsvpTunnels Gauge32, vRtrStatActiveRsvpTunnels Gauge32, vRtrV6StatTotalRsvpTunnels Gauge32, vRtrV6StatActiveRsvpTunnels Gauge32, vRtrHostRoutes Gauge32, vRtrHostActiveRoutes Gauge32, vRtrV6HostRoutes Gauge32, vRtrV6HostActiveRoutes Gauge32, vRtrStatLocalARPEntries Gauge32, vRtrStatStaticARPEntries Gauge32, vRtrStatDynamicARPEntries Gauge32, vRtrStatManagedARPEntries Gauge32, vRtrStatInternalARPEntries Gauge32, vRtrManagedRoutes Gauge32, vRtrManagedActiveRoutes Gauge32 } vRtrOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrOperState indicates current operational status of this virtual router." ::= { vRtrStatEntry 1 } vRtrDirectRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrDirectRoutes indicates the current number of direct routes for this instance of the route table." ::= { vRtrStatEntry 2 } vRtrDirectActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrDirectActiveRoutes indicates the current number of active direct routes for this instance of the route table." ::= { vRtrStatEntry 3 } vRtrStaticRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrStaticRoutes indicates the current number of static routes for this instance of the route table." ::= { vRtrStatEntry 4 } vRtrStaticActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrStaticActiveRoutes indicates the current number of active static routes for this instance of the route table." ::= { vRtrStatEntry 5 } vRtrOSPFRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrOSPFRoutes indicates the current number of ospf routes for this instance of the route table." ::= { vRtrStatEntry 6 } vRtrOSPFActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrOSPFActiveRoutes indicates the current number of active ospf routes for this instance of the route table." ::= { vRtrStatEntry 7 } vRtrBGPRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrBGPRoutes indicates the current number of bgp routes for this instance of the route table." ::= { vRtrStatEntry 8 } vRtrBGPActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrBGPActiveRoutes indicates the current number of active bgp routes for this instance of the route table." ::= { vRtrStatEntry 9 } vRtrISISRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrISISRoutes indicates the current number of isis routes for this instance of the route table." ::= { vRtrStatEntry 10 } vRtrISISActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrISISActiveRoutes indicates the current number of active isis routes for this instance of the route table." ::= { vRtrStatEntry 11 } vRtrRIPRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrRIPRoutes indicates the current number of rip routes for this instance of the route table." ::= { vRtrStatEntry 12 } vRtrRIPActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrRIPActiveRoutes indicates the current number of active rip routes for this instance of the route table." ::= { vRtrStatEntry 13 } vRtrAggregateRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrAggregateRoutes indicates the current number of aggregate routes for this instance of the route table." ::= { vRtrStatEntry 14 } vRtrAggregateActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrAggregateActiveRoutes indicates the current number of active aggregate routes for this instance of the route table." ::= { vRtrStatEntry 15 } vRtrStatConfiguredIfs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrStatConfiguredIfs indicates the current number of router interfaces configured on this virtual router." ::= { vRtrStatEntry 16 } vRtrStatActiveIfs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrStatActiveIfs indicates the current number of router interfaces with vRtrIfAdminState equal 'inService' on this virtual router." ::= { vRtrStatEntry 17 } vRtrStatIllegalLabels OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrStatIllegalLabels indicates the number of illegally received labels on this virtual router." ::= { vRtrStatEntry 18 } vRtrStatCurrNumRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrStatCurrNumRoutes indicates the current number of routes in the VRF for this virtual router." ::= { vRtrStatEntry 19 } vRtrStatBGPVpnRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrStatBGPVpnRoutes indicates the current number of VPN-IPV4 routes learned by MP-BGP for this virtual router." ::= { vRtrStatEntry 20 } vRtrStatBGPVpnActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrStatBGPVpnActiveRoutes indicates the current number of active VPN-IPV4 routes learned by MP-BGP for this virtual router." ::= { vRtrStatEntry 21 } vRtrStatTotalLdpTunnels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrStatTotalLdpTunnels indicates the current number of both active and inactive LDP tunnels." ::= { vRtrStatEntry 22 } vRtrStatTotalSdpTunnels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrStatTotalSdpTunnels indicates the current number of both active and inactive SDP tunnels." ::= { vRtrStatEntry 23 } vRtrStatActiveLdpTunnels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrStatActiveLdpTunnels indicates the current number of rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'ldp'." ::= { vRtrStatEntry 24 } vRtrStatActiveSdpTunnels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrStatActiveSdpTunnels indicates the current number of rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'sdp'." ::= { vRtrStatEntry 25 } vRtrMulticastRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrMulticastRoutes indicates the current number of rows in the vRtrPimGrpSrcTable." ::= { vRtrStatEntry 26 } vRtrStatActiveARPEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrStatActiveARPEntries indicates the number of active ARP entries for the specified virtual router in the system." ::= { vRtrStatEntry 27 } vRtrStatTotalARPEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrStatTotalARPEntries indicates the total number of active and inactive ARP entries for the specified virtual router in the system." ::= { vRtrStatEntry 28 } vRtrV6DirectRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6DirectRoutes indicates the current number of v6 direct routes for this instance of the route table." ::= { vRtrStatEntry 29 } vRtrV6DirectActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6DirectActiveRoutes indicates the current number of v6 active direct routes for this instance of the route table." ::= { vRtrStatEntry 30 } vRtrV6StaticRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6StaticRoutes indicates the current number of v6 static routes for this instance of the route table." ::= { vRtrStatEntry 31 } vRtrV6StaticActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6StaticActiveRoutes indicates the current number of v6 active static routes for this instance of the route table." ::= { vRtrStatEntry 32 } vRtrV6OSPFRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6OSPFRoutes indicates the current number of v6 ospf routes for this instance of the route table." ::= { vRtrStatEntry 33 } vRtrV6OSPFActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6OSPFActiveRoutes indicates the current number of v6 active ospf routes for this instance of the route table." ::= { vRtrStatEntry 34 } vRtrV6BGPRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6BGPRoutes indicates the current number of v6 bgp routes for this instance of the route table." ::= { vRtrStatEntry 35 } vRtrV6BGPActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6BGPActiveRoutes indicates the current number of v6 active bgp routes for this instance of the route table." ::= { vRtrStatEntry 36 } vRtrV6ISISRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6ISISRoutes indicates the current number of v6 isis routes for this instance of the route table." ::= { vRtrStatEntry 37 } vRtrV6ISISActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6ISISActiveRoutes indicates the current number of v6 active isis routes for this instance of the route table." ::= { vRtrStatEntry 38 } vRtrV6RIPRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6RIPRoutes indicates the current number of v6 rip routes for this instance of the route table." ::= { vRtrStatEntry 39 } vRtrV6RIPActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6RIPActiveRoutes indicates the current number of active v6 rip routes for this instance of the route table." ::= { vRtrStatEntry 40 } vRtrV6AggregateRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6AggregateRoutes indicates the current number of v6 aggregate routes for this instance of the route table." ::= { vRtrStatEntry 41 } vRtrV6AggregateActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6AggregateActiveRoutes indicates the current number of active v6 aggregate routes for this instance of the route table." ::= { vRtrStatEntry 42 } vRtrV6StatConfiguredIfs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6StatConfiguredIfs indicates the current number of v6 router interfaces configured on this virtual router." ::= { vRtrStatEntry 43 } vRtrV6StatActiveIfs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6StatActiveIfs indicates the current number of v6 router interfaces with vRtrIfAdminState equal 'inService' on this virtual router." ::= { vRtrStatEntry 44 } vRtrV6StatIllegalLabels OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6StatIllegalLabels indicates the number of illegally received v6 labels on this virtual router." ::= { vRtrStatEntry 45 } vRtrV6StatCurrNumRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6StatCurrNumRoutes indicates the current number of v6 routes in the VRF for this virtual router." ::= { vRtrStatEntry 46 } vRtrV6StatBGPVpnRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6StatBGPVpnRoutes indicates the current number of VPN-IPV6 routes learned by MP-BGP for this virtual router." ::= { vRtrStatEntry 47 } vRtrV6StatBGPVpnActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6StatBGPVpnActiveRoutes indicates the current number of active VPN-IPV6 routes learned by MP-BGP for this virtual router." ::= { vRtrStatEntry 48 } vRtrV6StatTotalLdpTunnels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6StatTotalLdpTunnels indicates the current number of both active and inactive v6 LDP tunnels." ::= { vRtrStatEntry 49 } vRtrV6StatTotalSdpTunnels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6StatTotalSdpTunnels indicates the current number of both active and inactive v6 SDP tunnels." ::= { vRtrStatEntry 50 } vRtrV6StatActiveLdpTunnels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6StatActiveLdpTunnels indicates the current number of v6 rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'ldp'." ::= { vRtrStatEntry 51 } vRtrV6StatActiveSdpTunnels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6StatActiveSdpTunnels indicates the current number of v6 rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'sdp'." ::= { vRtrStatEntry 52 } vRtrV6MulticastRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6MulticastRoutes indicates the current number of v6 rows in the vRtrPimGrpSrcTable." ::= { vRtrStatEntry 53 } vRtrV6StatActiveNbrEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6StatActiveNbrEntries indicates the number of active V6 neighbor discovery entries for the specified virtual router in the system." ::= { vRtrStatEntry 54 } vRtrV6StatTotalNbrEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6StatTotalNbrEntries indicates the total number of active and inactive v6 neighbor discovery entries for the specified virtual router in the system." ::= { vRtrStatEntry 55 } vRtrSubMgmtRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrSubMgmtRoutes indicates the total number of subscriber management routes in the route Table." ::= { vRtrStatEntry 56 } vRtrSubMgmtActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrSubMgmtActiveRoutes indicates the number of active subscriber management routes." ::= { vRtrStatEntry 57 } vRtrStatTotalRsvpTunnels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrStatTotalRsvpTunnels indicates the current number of both active and inactive RSVP tunnels." ::= { vRtrStatEntry 58 } vRtrStatActiveRsvpTunnels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrStatActiveRsvpTunnels indicates the current number of rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'rsvp'." ::= { vRtrStatEntry 59 } vRtrV6StatTotalRsvpTunnels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrV6StatTotalRsvpTunnels indicates the current number of both active and inactive IPv6 RSVP tunnels." ::= { vRtrStatEntry 60 } vRtrV6StatActiveRsvpTunnels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrV6StatActiveRsvpTunnels indicates the current number of IPv6 rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'rsvp'." ::= { vRtrStatEntry 61 } vRtrHostRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrHostRoutes indicates the current number of direct routes with prefix value 32 for this instance of the route table." ::= { vRtrStatEntry 62 } vRtrHostActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrHostActiveRoutes indicates the current number of active direct routes with prefix value 32 for this instance of the route table." ::= { vRtrStatEntry 63 } vRtrV6HostRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrV6HostRoutes indicates the current number of v6 direct routes with prefix value 128 for this instance of the route table." ::= { vRtrStatEntry 64 } vRtrV6HostActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrV6HostActiveRoutes indicates the current number of v6 active direct routes with prefix value 128 for this instance of the route table." ::= { vRtrStatEntry 65 } vRtrStatLocalARPEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrStatLocalARPEntries indicates the total number of active and inactive local ARP entries for the specified virtual router in the system." ::= { vRtrStatEntry 66 } vRtrStatStaticARPEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrStatStaticARPEntries indicates the total number of active and inactive static ARP entries for the specified virtual router in the system." ::= { vRtrStatEntry 67 } vRtrStatDynamicARPEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrStatDynamicARPEntries indicates the total number of active and inactive dynamic ARP entries for the specified virtual router in the system." ::= { vRtrStatEntry 68 } vRtrStatManagedARPEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrStatManagedARPEntries indicates the total number of active and inactive managed ARP entries for the specified virtual router in the system." ::= { vRtrStatEntry 69 } vRtrStatInternalARPEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrStatInternalARPEntries indicates the total number of active and inactive internal ARP entries for the specified virtual router in the system." ::= { vRtrStatEntry 70 } vRtrManagedRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrManagedRoutes indicates the total number of active and inactive managed routes for the specified virtual router in the system." ::= { vRtrStatEntry 71 } vRtrManagedActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrManagedActiveRoutes indicates the total number of active managed routes for the specified virtual router in the system." ::= { vRtrStatEntry 72 } -- -- Virtual Router Interfaces Table -- vRtrIfTotalNumber OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of router interfaces configured in this system." ::= { tmnxVRtrObjs 3 } vRtrIfTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrIfTable has an entry for each router interface configured in the system." ::= { tmnxVRtrObjs 4 } vRtrIfEntry OBJECT-TYPE SYNTAX VRtrIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a virtual router interface in the system. Entries can be created and deleted via SNMP SET operations using the vRtrIfRowStatus variable." INDEX { vRtrID, vRtrIfIndex } ::= { vRtrIfTable 1 } VRtrIfEntry ::= SEQUENCE { vRtrIfIndex InterfaceIndex, vRtrIfRowStatus RowStatus, vRtrIfType INTEGER, vRtrIfName TNamedItem, vRtrIfPortID TmnxPortID, vRtrIfChannelID Unsigned32, vRtrIfEncapValue TmnxEncapVal, vRtrIfAdminState TmnxAdminState, vRtrIfOperState TmnxOperState, vRtrIfAlias DisplayString, vRtrIfPhysicalAddress MacAddress, vRtrIfArpTimeout Unsigned32, vRtrIfIcmpMaskReply TruthValue, vRtrIfIcmpRedirects TruthValue, vRtrIfIcmpNumRedirects Unsigned32, vRtrIfIcmpRedirectsTime Unsigned32, vRtrIfIcmpUnreachables TruthValue, vRtrIfIcmpNumUnreachables Unsigned32, vRtrIfIcmpUnreachablesTime Unsigned32, vRtrIfIcmpTtlExpired TruthValue, vRtrIfIcmpNumTtlExpired Unsigned32, vRtrIfIcmpTtlExpiredTime Unsigned32, vRtrIfNtpBroadcast TruthValue, vRtrIfUnnumbered IpAddress, vRtrIfMtu Unsigned32, vRtrIfQosPolicyId TNetworkPolicyID, vRtrIfIngressFilterId TIPFilterID, vRtrIfEgressFilterId TIPFilterID, vRtrIfDirectedBroadcast TruthValue, vRtrIfMplsStatus TmnxStatus, vRtrIfUnnumberedIf DisplayString, vRtrIfCflowd INTEGER, vRtrIfVPNClass INTEGER, vRtrIfDescription TItemLongDescription, vRtrIfProtocol BITS, vRtrIfTosMarkingTrusted TruthValue, vRtrIfServiceId TmnxServId, vRtrIfArpPopulate INTEGER, vRtrIfIPv6ConfigAllowed TruthValue, vRtrIfIPv6OperState TmnxOperState, vRtrIfIPv6IngressFilterId TIPFilterID, vRtrIfIPv6EgressFilterId TIPFilterID, vRtrIfIcmpV6Redirects TruthValue, vRtrIfIcmpV6NumRedirects Unsigned32, vRtrIfIcmpV6RedirectsTime Unsigned32, vRtrIfIcmpV6Unreachables TruthValue, vRtrIfIcmpV6NumUnreachables Unsigned32, vRtrIfIcmpV6UnreachablesTime Unsigned32, vRtrIfIcmpV6TimeExceeded TruthValue, vRtrIfIcmpV6NumTimeExceeded Unsigned32, vRtrIfIcmpV6TimeExceededTime Unsigned32, vRtrIfIcmpV6PktTooBig TruthValue, vRtrIfIcmpV6NumPktTooBig Unsigned32, vRtrIfIcmpV6PktTooBigTime Unsigned32, vRtrIfIcmpV6ParamProblem TruthValue, vRtrIfIcmpV6NumParamProblem Unsigned32, vRtrIfIcmpV6ParamProblemTime Unsigned32, vRtrIfLinkLocalAddressType InetAddressType, vRtrIfLinkLocalAddress InetAddress, vRtrIfLinkLocalAddressState TmnxInetAddrState, vRtrIfLastOperStateChange TimeStamp, vRtrIfOperMtu Unsigned32, vRtrIfGlobalIndex Unsigned32, vRtrIfDelaySeconds Unsigned32, vRtrIfDelayUpTimer Integer32, vRtrIfLocalDhcpServerName TNamedItemOrEmpty, vRtrIfInitDelayEnable TruthValue, vRtrIfCpmProtPolicyId TCpmProtPolicyID, vRtrIfCpmProtUncfgdProtoDropCnt Gauge32, vRtrIfLdpSyncTimer Unsigned32 } vRtrIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The unique value which identifies this interface of this virtual router in the Tmnx system. This field provides an identifier for virtual router interfaces similar to the ifIndex values used in the mib-2 interfaces table for physical interfaces. The vRtrIfIndex values can be reused for different virtual routers, but are unique within those entries with the same vRtrID. The vRtrIfIndex value for each virtual interface must remain constant at least from one re-initialization of the system management processor to the next." ::= { vRtrIfEntry 1 } vRtrIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status. The creation or deletion of a router interface entry causes creation or deletion of corresponding entries in other Tmnx MIB tables with the same vRtrID and vRtrIfIndex values, such as the vRtrIpAddrTable. The router interface is associated to a physical port interface through the vRtrIfPortID and vRtrIfEncapValue variables. The RowStatus cannot be SET to 'active' unless vRtrIfName has been initialized." ::= { vRtrIfEntry 2 } vRtrIfType OBJECT-TYPE SYNTAX INTEGER { network(1), service(2), serviceIes(3), serviceRtdVpls(4), --obsolete serviceVprn(5), serviceIesSubscriber(6), serviceIesGroup(7), serviceVprnSubscriber(8), serviceVprnGroup(9), serviceIesRedundant(10), serviceVprnRedundant(11), serviceVpls(12), serviceIesCem(13), --not supported serviceVprnCem(14), --not supported serviceVprnIPsec(15), serviceVprnIPMirror(16) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfType specifies the type of this interface. Different virtual router interface types are defined as follows: network - defined on a network port. service - used internally. serviceIes - defined on a SAP or Spoke SDP. serviceRtdVpls - obsoleted. serviceVprn - defined on a SAP or Spoke SDP. serviceIesSubscriber - used internally. serviceIesGroup - defined on a SAP serviceVprnSubscriber - used internally. serviceVprnGroup - defined on a SAP. serviceIesRedundant - defined on a Spoke SDP. serviceVprnRedundant - defined on a Spoke SDP. serviceVpls - defined on an IP endpoint for VPLS. serviceIesCem - defined on a SAP. --not supported serviceVprnCem - defined on a SAP. --not supported serviceVprnIPsec - defined on a SAP. serviceVprnIPMirror - defined on a Mirror." ::= { vRtrIfEntry 3 } vRtrIfName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative name assigned this router interface. The interface name must be unique among entries with the same vRtrID value. In order for row creation to succeed, a value must also be assigned to vRtrIfName." ::= { vRtrIfEntry 4 } vRtrIfPortID OBJECT-TYPE SYNTAX TmnxPortID MAX-ACCESS read-create STATUS current DESCRIPTION "The physical port to which this interface is bound. If vRtrIfPortID is zero (0), then there is no binding between this virtual router interface and a physical port. Once an interface has been bound to a port, several steps are required to change the binding to some other TmnxPortID value. vRtrIfAdminState must be 'outOfService'; vRtrIfPortID must be set to zero (0) to disassociate the interface from the original port binding; finally, set vRtrIfPortID to the value for the new port binding. Setting vRtrIfPortID to 0x20000001 indicates that this interface is the system interface for the device." DEFVAL { 0 } ::= { vRtrIfEntry 5 } vRtrIfChannelID OBJECT-TYPE SYNTAX Unsigned32 (0..64) MAX-ACCESS read-create STATUS obsolete DESCRIPTION "When the physical port, vRtrIfPortID, is a SONET port, vRtrIfChannelID is the STSx channel number used by this interface. If vRtrIfPortID is not a SONET port or the interface has not yet been bound to a physical port, vRtrIfChannelID will be zero (0). This object was obsoleted in release 5.0." DEFVAL { 0 } ::= { vRtrIfEntry 6 } vRtrIfEncapValue OBJECT-TYPE SYNTAX TmnxEncapVal MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the label used along with vRtrIfPortID to identify a SAP on the specified access port." ::= { vRtrIfEntry 7 } vRtrIfAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The desired administrative state for this router interface." DEFVAL { outOfService } ::= { vRtrIfEntry 8 } vRtrIfOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational status of this router interface." ::= { vRtrIfEntry 9 } vRtrIfAlias OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "An alternative administrative name assigned this router interface." ::= { vRtrIfEntry 10 } vRtrIfPhysicalAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The interface's address at its protocol sub-layer. For example, for an 802.x interface, this object normally contains a MAC address. The interface's media-specific MIB must define the bit and byte ordering and the format of the value of this object. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length." ::= { vRtrIfEntry 11 } vRtrIfArpTimeout OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfArpTimeout determines how long an ARP entry associated with this interface remains in the ARP cache. When vRtrIfArpTimeout has a value of zero, '0', the entry will never be cleared from the cache." DEFVAL { 14400 } ::= { vRtrIfEntry 12 } vRtrIfIcmpMaskReply OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When vRtrIfIcmpMaskReply is set to 'true', a reply will be issued when this node is requested for the network mask for this subnet. The requesting node must be attached to the local network. When vRtrIfIcmpMaskReply is set to 'false', no reply is issued if an ICMP mask request is received." DEFVAL { true } ::= { vRtrIfEntry 13 } vRtrIfIcmpRedirects OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When vRtrIfIcmpRedirects is set to 'true', ICMP redirects are generated when routes are not optimal on this router and another router on the same subnetwork has a better route in order to alert that node that a better route is available. When vRtrIfIcmpRedirects is set to 'false', ICMP redirects are not generated." DEFVAL { true } ::= { vRtrIfEntry 14 } vRtrIfIcmpNumRedirects OBJECT-TYPE SYNTAX Unsigned32 (10..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIcmpNumRedirects limits the number of redirects issued per the time frame specified in vRtrIfIcmpRedirectsTime." DEFVAL { 100 } ::= { vRtrIfEntry 15 } vRtrIfIcmpRedirectsTime OBJECT-TYPE SYNTAX Unsigned32 (1..60) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIcmpRedirectsTime determines the time frame in seconds that is used to limit the number of redirects issued per time frame." DEFVAL { 10 } ::= { vRtrIfEntry 16 } vRtrIfIcmpUnreachables OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When vRtrIfIcmpUnreachables is set to 'true', ICMP host and network unreachable messages are generated by this interface. When vRtrIfIcmpUnreachables is set to 'false', ICMP host and network unreachable messages are not sent." DEFVAL { true } ::= { vRtrIfEntry 17 } vRtrIfIcmpNumUnreachables OBJECT-TYPE SYNTAX Unsigned32 (10..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIcmpNumUnreachables determines how many destination unreachable messages are issued in the time frame specified by vRtrIfIcmpUnreachablesTime." DEFVAL { 100 } ::= { vRtrIfEntry 18 } vRtrIfIcmpUnreachablesTime OBJECT-TYPE SYNTAX Unsigned32 (1..60) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIcmpUnreachablesTime sets the time frame in seconds that is used to limit the number of destination unreachable messages issued per time frame." DEFVAL { 10 } ::= { vRtrIfEntry 19 } vRtrIfIcmpTtlExpired OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When vRtrIfIcmpTtlExpired is set to 'true', the rate that ttl-expired messages by this interface is throttled based on the values of vRtrIfIcmpNumTtlExpired and vRtrIfIcmpTtlExpiredTime. When vRtrIfIcmpTtlExpired is set to 'false', unlimited ttl-expired messages are sent." DEFVAL { true } ::= { vRtrIfEntry 20 } vRtrIfIcmpNumTtlExpired OBJECT-TYPE SYNTAX Unsigned32 (10..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIcmpNumTtlExpired defines how many ttl-expired messages will be issued in the time frame specified by vRtrIfIcmpTtlExpiredTime." DEFVAL { 100 } ::= { vRtrIfEntry 21 } vRtrIfIcmpTtlExpiredTime OBJECT-TYPE SYNTAX Unsigned32 (1..60) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIcmpTtlExpiredTime sets the time frame in seconds that is used to limit the number of ttl-expired messages issued by this interface with the specified time frame." DEFVAL { 10 } ::= { vRtrIfEntry 22 } vRtrIfNtpBroadcast OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When vRtrIfNtpBroadcast is set to 'true', the NTP broadcasts will be transmitted on this interface." DEFVAL { false } ::= { vRtrIfEntry 23 } vRtrIfUnnumbered OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address to be used when generating packets on this interface. This variable is complemented by vRtrIfUnnumbered. If vRtrIfUnnumberedIf is a null-string and vRtrIfUnnumbered is '0.0.0.0' it implies that no unnumbered interface is configured. At any instant only one of the two members can be non-null. A value of '255.255.255.255' implies the use of system-ip. It is strongly suggested to use the node's system IP address as it is not associated with a particular physical interface and is therefore always reachable." DEFVAL { '00000000'H } -- 0.0.0.0 ::= { vRtrIfEntry 24 } vRtrIfMtu OBJECT-TYPE SYNTAX Unsigned32(0|512..9000) UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfMtu is used to reflect the MTU size of this interface in the header of an ICMP MTU exceeded message when a packet is too large to be transmitted on this interface. The default size is calculated by subtracting the DLC header size from the physical MTU size of the interface. When a SNMP SET request is received with a value of zero (0), the agent actually sets vRtrIfMtu to the calculated default size." DEFVAL { 0 } ::= { vRtrIfEntry 25 } vRtrIfQosPolicyId OBJECT-TYPE SYNTAX TNetworkPolicyID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfQosPolicyId associates a pre-existing network-policy-id to a network interface. Packets are marked using qos policies on edge switches; invoking a qos policy on a network port allows for the packets that match the policy criteria to be remarked. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface." DEFVAL { 1 } ::= { vRtrIfEntry 26 } vRtrIfIngressFilterId OBJECT-TYPE SYNTAX TIPFilterID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIngressFilterId associates an ip-filter-id with an ingress interface. Filters control the forwarding and dropping of packets based on IP criteria. A value of zero (0) indicates that there is no ip-filter-id associated with this interface. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface." DEFVAL { 0 } ::= { vRtrIfEntry 27 } vRtrIfEgressFilterId OBJECT-TYPE SYNTAX TIPFilterID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfEgressFilterId associates an ip-filter-id with an egress interface. Filters control the forwarding and dropping of packets based on IP criteria. A value of zero (0) indicates that there is no ip-filter-id associated with this interface. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface." DEFVAL { 0 } ::= { vRtrIfEntry 28 } vRtrIfDirectedBroadcast OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When vRtrIfDirectedBroadcast is set to 'true', allows broadcasts directed to this interface to be accepted. When 'false', directed broadcasts are dropped. This is of particular use when preventing denial of service attacks." DEFVAL { false } ::= { vRtrIfEntry 29 } vRtrIfMplsStatus OBJECT-TYPE SYNTAX TmnxStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Setting this variable to 'create' causes this interface to be used with MPLS. It also causes a row to be created in the vRtrMplsIfTable. Setting it to 'delete' removes the interface from MPLS and causes the corresponding row in the vRtrMplsIfTable to be removed. However, an attempt to set vRtrIfMplsStatus to 'delete' will fail if MPLS activity on this interface is not administratively in the outOfService state, i.e. vRtrMplsIfAdminState of the vRtrMplsIfTable must be set to 'outOfService'." DEFVAL { delete } ::= { vRtrIfEntry 30 } vRtrIfUnnumberedIf OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The name of the interface to which this unnumbered interface will refer to. This variable is complemented by vRtrIfUnnumbered. If vRtrIfUnnumberedIf is a null-string and vRtrIfUnnumbered is '0' it implies that no unnumbered interface is configured. At any instant only one of the two members can be non-null." ::= { vRtrIfEntry 31 } vRtrIfCflowd OBJECT-TYPE SYNTAX INTEGER { none (1), acl (2), interface (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfCflowd specifies the type of Cflowd analysis applied to this interface. A Cflowd profile controls the sampling and analysis of data flows through the router. A value of none (1) indicates that there is no Cflowd analysis associated with this interface." DEFVAL { none } ::= { vRtrIfEntry 32 } vRtrIfVPNClass OBJECT-TYPE SYNTAX INTEGER { unknown (0), carrierOfCarrier (1), enterprise (2), interProvider (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfVPNClass specifies the type of VPN scenario supported on this virtual router interface." ::= { vRtrIfEntry 33 } vRtrIfDescription OBJECT-TYPE SYNTAX TItemLongDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDescription is a user provided description string for this virtual router interface. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length." DEFVAL { ''H } -- the empty string ::= { vRtrIfEntry 34 } vRtrIfProtocol OBJECT-TYPE SYNTAX BITS { ospfv2 (0), rip (1), isis (2), bgp (3), mpls (4), rsvp (5), ldp (6), igmp (7), pim (8), ospf3 (9), mld (10) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfProtocol indicates which protocols are running on this virtual router interface. If the bit corresponding to a protocol is set, then the protocol is enabled on this interface." ::= { vRtrIfEntry 35 } vRtrIfTosMarkingTrusted OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfTosMarkingTrusted specifies whether the TOS bits on the packets ingressing on the interface should be trusted by the system or not. If the value is set to 'true', the TOS bits should be trusted. If the system does not trust these packets, it will remark the packets upon egress as indicated by the value of the egress remark flag, ALCATEL-IND1-TIMETRA-QOS-MIB:: tNetworkPolicyEgressRemark. The egress remark flag is part of the QoS policy applied to the network interface. The interfaces belonging to the IES service have the egress remark flag set to not trusted, 'false', by default. For all other interface types, the TOS bits are trusted by default." DEFVAL { true } ::= { vRtrIfEntry 36 } vRtrIfServiceId OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfServiceId specifies the service id for this interface. This object must always be set at row creation when the vRtrIfType is not network(1). This object cannot be modified once the row is created." DEFVAL { 0 } ::= { vRtrIfEntry 37 } vRtrIfArpPopulate OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfArpPopulate specifies the ARP populate action. The value disabled means that the normal ARP protocol is active. The value enabled means that the system will not originate ARP requests on this interface. The ARP cache is only populated with MAC addresses learned via the DHCP protocol. If the value of vRtrIfType is network, this object can only be set to disabled." DEFVAL { disabled } ::= { vRtrIfEntry 38 } vRtrIfIPv6ConfigAllowed OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIPv6ConfigAllowed specifies whether IPv6 can be configured on this router interface. When the value is 'true', IPv6 can be configured on this interface. When it is 'false', IPv6 cannot be configured." DEFVAL { false } ::= { vRtrIfEntry 39 } vRtrIfIPv6OperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational status for IPv6 on this router interface." ::= { vRtrIfEntry 40 } vRtrIfIPv6IngressFilterId OBJECT-TYPE SYNTAX TIPFilterID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIPv6IngressFilterId associates an ip-filter-id with an ingress v6 interface. Filters control the forwarding and dropping of packets based on IP criteria. A value of zero (0) indicates that there is no ip-filter-id associated with this interface. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface." DEFVAL { 0 } ::= { vRtrIfEntry 41 } vRtrIfIPv6EgressFilterId OBJECT-TYPE SYNTAX TIPFilterID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIPv6EgressFilterId associates an ip-filter-id with an egress v6 interface. Filters control the forwarding and dropping of packets based on IP criteria. A value of zero (0) indicates that there is no ip-filter-id associated with this interface. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface." DEFVAL { 0 } ::= { vRtrIfEntry 42 } vRtrIfIcmpV6Redirects OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When vRtrIfIcmpV6Redirects is set to 'true', ICMPv6 redirects are generated when routes are not optimal on this router and another router on the same subnetwork has a better route in order to alert that node that a better route is available. When vRtrIfIcmpV6Redirects is set to 'false', ICMPv6 redirects are not generated." DEFVAL { true } ::= { vRtrIfEntry 43 } vRtrIfIcmpV6NumRedirects OBJECT-TYPE SYNTAX Unsigned32 (10..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIcmpV6NumRedirects limits the number of v6 redirects issued per the time frame specified in vRtrIfIcmpV6RedirectsTime." DEFVAL { 100 } ::= { vRtrIfEntry 44 } vRtrIfIcmpV6RedirectsTime OBJECT-TYPE SYNTAX Unsigned32 (1..60) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIcmpV6RedirectsTime determines the time frame in seconds that is used to limit the number of v6 redirects issued per time frame." DEFVAL { 10 } ::= { vRtrIfEntry 45 } vRtrIfIcmpV6Unreachables OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When vRtrIfIcmpV6Unreachables is set to 'true', ICMPv6 host and network unreachable messages are generated by this interface. When vRtrIfIcmpV6Unreachables is set to 'false', ICMPv6 host and network unreachable messages are not sent." DEFVAL { true } ::= { vRtrIfEntry 46 } vRtrIfIcmpV6NumUnreachables OBJECT-TYPE SYNTAX Unsigned32 (10..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIcmpV6NumUnreachables determines how many destination unreachable ICMPv6 messages are issued in the time frame specified by vRtrIfIcmpV6UnreachablesTime." DEFVAL { 100 } ::= { vRtrIfEntry 47 } vRtrIfIcmpV6UnreachablesTime OBJECT-TYPE SYNTAX Unsigned32 (1..60) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIcmpV6UnreachablesTime sets the time frame in seconds that is used to limit the number of destination unreachable ICMPv6 messages issued per time frame." DEFVAL { 10 } ::= { vRtrIfEntry 48 } vRtrIfIcmpV6TimeExceeded OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIcmpV6TimeExceeded specifies whether time-exceeded ICMP messages should be sent. When it is set to 'true', ICMPv6 time-exceeded messages are generated by this interface. When vRtrIfIcmpV6TimeExceeded is set to 'false', ICMPv6 time-exceeded messages are not sent." DEFVAL { true } ::= { vRtrIfEntry 49 } vRtrIfIcmpV6NumTimeExceeded OBJECT-TYPE SYNTAX Unsigned32 (10..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIcmpV6NumTimeExceeded specifies how many time-exceeded ICMPv6 messages are issued in the time frame specified by vRtrIfIcmpV6TimeExceededTime." DEFVAL { 100 } ::= { vRtrIfEntry 50 } vRtrIfIcmpV6TimeExceededTime OBJECT-TYPE SYNTAX Unsigned32 (1..60) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIcmpV6TimeExceededTime specifies the time frame in seconds that is used to limit the number of time-exceeded ICMPv6 messages issued per time frame." DEFVAL { 10 } ::= { vRtrIfEntry 51 } vRtrIfIcmpV6PktTooBig OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIcmpV6PktTooBig specifies whether packet-too-big ICMP messages should be sent. When it is set to 'true', ICMPv6 packet-too-big messages are generated by this interface. When vRtrIfIcmpV6PktTooBig is set to 'false', ICMPv6 packet-too-big messages are not sent." DEFVAL { true } ::= { vRtrIfEntry 52 } vRtrIfIcmpV6NumPktTooBig OBJECT-TYPE SYNTAX Unsigned32 (10..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIcmpV6NumPktTooBig specifies how many packet-too-big ICMPv6 messages are issued in the time frame specified by vRtrIfIcmpV6PktTooBigTime." DEFVAL { 100 } ::= { vRtrIfEntry 53 } vRtrIfIcmpV6PktTooBigTime OBJECT-TYPE SYNTAX Unsigned32 (1..60) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIcmpV6PktTooBigTime specifies the time frame in seconds that is used to limit the number of packet-too-big ICMPv6 messages issued per time frame." DEFVAL { 10 } ::= { vRtrIfEntry 54 } vRtrIfIcmpV6ParamProblem OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIcmpV6ParamProblem specifies whether parameter-problem ICMP messages should be sent. When it is set to 'true', ICMPv6 parameter-problem messages are generated by this interface. When vRtrIfIcmpV6ParamProblem is set to 'false', ICMPv6 parameter-problem messages are not sent." DEFVAL { true } ::= { vRtrIfEntry 55 } vRtrIfIcmpV6NumParamProblem OBJECT-TYPE SYNTAX Unsigned32 (10..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIcmpV6NumParamProblem specifies how many parameter-problem ICMPv6 messages are issued in the time frame specified by vRtrIfIcmpV6ParamProblemTime." DEFVAL { 100 } ::= { vRtrIfEntry 56 } vRtrIfIcmpV6ParamProblemTime OBJECT-TYPE SYNTAX Unsigned32 (1..60) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIcmpV6ParamProblemTime specifies the time frame in seconds that is used to limit the number of parameter-problem ICMPv6 messages issued per time frame." DEFVAL { 10 } ::= { vRtrIfEntry 57 } vRtrIfLinkLocalAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfLinkLocalAddressType indicates the IP address type of the link local address of this virtual router interface. When the value of vRtrIfIPv6OperState is 'inService', this object will have a value of 'ipv6z', and 'unknown' otherwise." ::= { vRtrIfEntry 58 } vRtrIfLinkLocalAddress OBJECT-TYPE SYNTAX InetAddress (SIZE(0|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfLinkLocalAddress indicates the link local IP address of this virtual router interface. This address valid when the value of vRtrIfIPv6OperState is 'inService'." ::= { vRtrIfEntry 59 } vRtrIfLinkLocalAddressState OBJECT-TYPE SYNTAX TmnxInetAddrState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfLinkLocalAddressState indicates the address state of vRtrIfLinkLocalAddress. When vRtrIfIPv6OperState is 'outOfService', the value of this object is 'unknown'." ::= { vRtrIfEntry 60 } vRtrIfLastOperStateChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfLastOperStateChange indicates the sysUpTime when the operational state of this interface last changed." ::= { vRtrIfEntry 61 } vRtrIfOperMtu OBJECT-TYPE SYNTAX Unsigned32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfOperMtu indicates the operational value of the IP MTU on this interface. It is the minimum of the vRtrIfMtu and the MTU of the physical port this interface is bound to." ::= { vRtrIfEntry 62 } vRtrIfGlobalIndex OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfGlobalIndex uniquely identifies this interface in the tmnx system. This field provides an identifier for router interfaces similar to the vRtrIfIndex value, except that vRtrIfIndex is unique within each virtual router. The vRtrIfGlobalIndex is unique system wide regardless of the vRtrID. The vRtrIfGlobalIndex value for each virtual interface must remain constant at least from one re-initialization of the system management processor to the next." ::= { vRtrIfEntry 63 } vRtrIfDelaySeconds OBJECT-TYPE SYNTAX Unsigned32 (0..1200) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDelaySeconds specifies the time in seconds that is used to bring up the interface. When interface comes up, it will not become operational until after the specified delay. The default value of vRtrIfDelaySeconds is 0. It indicates that the interface will become operational as soon as it is enabled." DEFVAL { 0 } ::= { vRtrIfEntry 64 } vRtrIfDelayUpTimer OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfDelayUpTimer indicates the time left before the interface comes up when vRtrIfDelaySeconds is configured to a non-zero value. When the interface is down, this object will return the value -1. It's value can be in the range 0 to vRtrIfDelaySeconds's value if the interface is 'about to come up'. If the interface is up, the value of vRtrIfDelayUpTimer will be 0." ::= { vRtrIfEntry 65 } vRtrIfLocalDhcpServerName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfLocalDhcpServerName specifies the local DHCP server that can be reached via this interface. The server itself is configured on virtual router level in object TIMETRA-DHCP-SERVER-MIB::tmnxDhcpServerCfgServerName. Assigning an ip-address to it is done here by linking it to an interface. A server can be linked to several interfaces on the same virtual router." DEFVAL { ''H } ::= { vRtrIfEntry 66 } vRtrIfInitDelayEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfInitDelayEnable specifies whether vRtrIfDelaySeconds is used only the next time or everytime the system attempts to bring the interface operationally up. The value of vRtrIfInitDelayEnable is ignored if the value of vRtrIfDelaySeconds is set to 0. The value of vRtrIfInitDelayEnable is only set when interface is of type subscriber-interface. When the value vRtrIfInitDelayEnable is set to 'false', everytime the system attempts to bring the interface operationally up, it will be delayed by the value of vRtrIfDelaySeconds. When the value vRtrIfInitDelayEnable is set to 'true', only the next time the system attempts to bring the interface operationally up, it will be delayed by the value of vRtrIfDelaySeconds." DEFVAL { false } ::= { vRtrIfEntry 67 } vRtrIfCpmProtPolicyId OBJECT-TYPE SYNTAX TCpmProtPolicyID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfCpmProtPolicyId associates a CPM Protection policy with an interface. A value of zero (0) specifies that no CPM Protection policy is associated with this interface. A value of one (1) specifies that the default CPM Protection policy is associated with this interface. If no value for vRtrIfCpmProtPolicyId is specified when the vRtrIfEntry is created, the system assigns a default value, derived from the value of the object vRtrIfType, as follows: vRtrIfType vRtrIfCpmProtPolicyId --------------------------------------------------------------------- network 1 service used internally. serviceIes 1 serviceRtdVpls obsoleted. serviceVprn 1 serviceIesSubscriber 0 serviceIesGroup 0 serviceVprnSubscriber used internally. serviceVprnGroup 0 serviceIesRedundant 0 serviceVprnRedundant 0 serviceVpls 0 serviceIesCem defined on a SAP. --not supported serviceVprnCem defined on a SAP. --not supported serviceVprnIPsec 0 serviceVprnIPMirror 0 If an interface would get a default value of 'one', it is not allowed to set the value of vRtrIfCpmProtPolicyId to 'zero'. If an interface would get a default value of 'zero', it is not allowed to modify the value of vRtrIfCpmProtPolicyId. This object is not supported on SR-1 and ESS-1, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '5', and 7710, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'." ::= { vRtrIfEntry 68 } vRtrIfCpmProtUncfgdProtoDropCnt OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfCpmProtUncfgdProtoDropCnt indicates the number of network control protocol messages dropped due to the operation of the protocol protection facility. The protocol protection facility can be enabled and disabled by means of the object TIMETRA-SECURITY-MIB::tmnxCpmProtDropUncfgdProtocolMsg. When the protocol protection facility is enabled, network control protocol traffic received on this virtual router interface is dropped if the protocol is not configured on this virtual router interface. The value of vRtrIfProtocol indicates which protocols are configured on this virtual router interface. This object is not supported on SR-1 and ESS-1, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '5', and 7710, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'." ::= { vRtrIfEntry 69 } vRtrIfLdpSyncTimer OBJECT-TYPE SYNTAX Unsigned32 (0|1..1800) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfLdpSyncTimer specifies a time interval used for IGP-LDP synchronization. The timer is started from the time the LDP session to the neighbor is up over the interface. This is to allow for the label FEC bindings to be exchanged. When the timer expires, the link cost is restored and is re-advertised. IGP will announce a new best next-hop and LDP will use it if the label binding for the neighbor's FEC is available." DEFVAL { 0 } ::= { vRtrIfEntry 70 } -- -- Virtual Router ICMPv6 Statistics Table -- vRtrIcmp6Table OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIcmp6Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrIcmp6Table table contains statistics of ICMPv6 messages that are received and sourced by a router instance." ::= { tmnxVRtrObjs 31 } vRtrIcmp6Entry OBJECT-TYPE SYNTAX VRtrIcmp6Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents the ICMP statistics of a virtual router instance. Entries are created and deleted when entries in the vRtrConfEntry are created and deleted." AUGMENTS { vRtrConfEntry } ::= { vRtrIcmp6Table 1 } VRtrIcmp6Entry ::= SEQUENCE { vRtrIcmp6InMsgs Counter32, vRtrIcmp6InErrors Counter32, vRtrIcmp6InDestUnreachs Counter32, vRtrIcmp6InAdminProhibs Counter32, vRtrIcmp6InTimeExcds Counter32, vRtrIcmp6InParmProblems Counter32, vRtrIcmp6InPktTooBigs Counter32, vRtrIcmp6InEchos Counter32, vRtrIcmp6InEchoReplies Counter32, vRtrIcmp6InRtrSolicits Counter32, vRtrIcmp6InRtrAdvertisements Counter32, vRtrIcmp6InNbrSolicits Counter32, vRtrIcmp6InNbrAdvertisements Counter32, vRtrIcmp6InRedirects Counter32, vRtrIcmp6InGrpMembQueries Counter32, vRtrIcmp6InGrpMembResponses Counter32, vRtrIcmp6InGrpMembReductions Counter32, vRtrIcmp6OutMsgs Counter32, vRtrIcmp6OutErrors Counter32, vRtrIcmp6OutDestUnreachs Counter32, vRtrIcmp6OutAdminProhibs Counter32, vRtrIcmp6OutTimeExcds Counter32, vRtrIcmp6OutParmProblems Counter32, vRtrIcmp6OutPktTooBigs Counter32, vRtrIcmp6OutEchos Counter32, vRtrIcmp6OutEchoReplies Counter32, vRtrIcmp6OutRtrSolicits Counter32, vRtrIcmp6OutRtrAdvertisements Counter32, vRtrIcmp6OutNbrSolicits Counter32, vRtrIcmp6OutNbrAdvertisements Counter32, vRtrIcmp6OutRedirects Counter32, vRtrIcmp6OutGrpMembQueries Counter32, vRtrIcmp6OutGrpMembResponses Counter32, vRtrIcmp6OutGrpMembReductions Counter32 } vRtrIcmp6InMsgs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6InMsgs indicates the total number of ICMP messages received by this router instance which includes all those counted by vRtrIcmp6InErrors." ::= { vRtrIcmp6Entry 1 } vRtrIcmp6InErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6InErrors indicates the number of ICMP messages which this router instance received but determined as having ICMP-specific errors (bad ICMP checksums, bad length , etc.)." ::= { vRtrIcmp6Entry 2 } vRtrIcmp6InDestUnreachs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6InDestUnreachs indicates the number of ICMP Destination Unreachable messages received by this router instance." ::= { vRtrIcmp6Entry 3 } vRtrIcmp6InAdminProhibs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6InAdminProhibs indicates the number of ICMP destination unreachable/communication administratively prohibited messages received by this router instance." ::= { vRtrIcmp6Entry 4 } vRtrIcmp6InTimeExcds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6InTimeExcds indicates the number of ICMP Time Exceeded messages received by this router instance." ::= { vRtrIcmp6Entry 5 } vRtrIcmp6InParmProblems OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6InParmProblems indicates the number of ICMP Parameter Problem messages received by this router instance." ::= { vRtrIcmp6Entry 6 } vRtrIcmp6InPktTooBigs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6InPktTooBigs indicates the number of ICMP Packet Too Big messages received by this router instance." ::= { vRtrIcmp6Entry 7 } vRtrIcmp6InEchos OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6InEchos indicates the number of ICMP Echo (request) messages received by this router instance." ::= { vRtrIcmp6Entry 8 } vRtrIcmp6InEchoReplies OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6InEchoReplies indicates the number of ICMP Echo Reply messages received by this router instance." ::= { vRtrIcmp6Entry 9 } vRtrIcmp6InRtrSolicits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6InRtrSolicits indicates the number of ICMP Router Solicit messages received by this router instance." ::= { vRtrIcmp6Entry 10 } vRtrIcmp6InRtrAdvertisements OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6InRtrAdvertisements indicates the number of ICMP Router Advertisement messages received by this router instance." ::= { vRtrIcmp6Entry 11 } vRtrIcmp6InNbrSolicits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6InNbrSolicits indicates the number of ICMP Neighbor Solicit messages received by this router instance." ::= { vRtrIcmp6Entry 12 } vRtrIcmp6InNbrAdvertisements OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6InNbrAdvertisements indicates the number of ICMP Neighbor Advertisement messages received by this router instance." ::= { vRtrIcmp6Entry 13 } vRtrIcmp6InRedirects OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6InRedirects indicates number of ICMP Redirect messages received by this router instance." ::= { vRtrIcmp6Entry 14 } vRtrIcmp6InGrpMembQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6InGrpMembQueries indicates the number of ICMP Group Membership Query messages received by this router instance." ::= { vRtrIcmp6Entry 15 } vRtrIcmp6InGrpMembResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6InGrpMembResponses indicates the number of ICMP Group Membership Response messages received by this router instance." ::= { vRtrIcmp6Entry 16 } vRtrIcmp6InGrpMembReductions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6InGrpMembReductions indicates the number of ICMP Group Membership Reduction messages received by this router instance." ::= { vRtrIcmp6Entry 17 } vRtrIcmp6OutMsgs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6OutMsgs indicates the total number of ICMP messages which this router instance attempted to send. Note that this counter includes all those counted by icmpOutErrors." ::= { vRtrIcmp6Entry 18 } vRtrIcmp6OutErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6OutErrors indicates the number of ICMP messages which this router instance did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of VRtrIpv6 to route the resultant datagram. In some implementations there may be no types of error which contribute to this counter's value." ::= { vRtrIcmp6Entry 19 } vRtrIcmp6OutDestUnreachs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6OutDestUnreachs indicates the number of ICMP Destination Unreachable messages sent by this router instance." ::= { vRtrIcmp6Entry 20 } vRtrIcmp6OutAdminProhibs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6OutAdminProhibs indicates the number of ICMP destination unreachable/communication administratively prohibited messages sent by this router instance." ::= { vRtrIcmp6Entry 21 } vRtrIcmp6OutTimeExcds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6OutTimeExcds indicates the number of ICMP Time Exceeded messages sent by this router instance." ::= { vRtrIcmp6Entry 22 } vRtrIcmp6OutParmProblems OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6OutParmProblems indicates the number of ICMP Parameter Problem messages sent by this router instance." ::= { vRtrIcmp6Entry 23 } vRtrIcmp6OutPktTooBigs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6OutPktTooBigs indicates the number of ICMP Packet Too Big messages sent by this router instance." ::= { vRtrIcmp6Entry 24 } vRtrIcmp6OutEchos OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6OutEchos indicates the number of ICMP Echo Request messages sent by this router instance." ::= { vRtrIcmp6Entry 25 } vRtrIcmp6OutEchoReplies OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6OutEchoReplies indicates the number of ICMP Echo Reply messages sent by this router instance." ::= { vRtrIcmp6Entry 26 } vRtrIcmp6OutRtrSolicits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6OutRtrSolicits indicates the number of ICMP Router Solicitation messages sent by this router instance." ::= { vRtrIcmp6Entry 27 } vRtrIcmp6OutRtrAdvertisements OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6OutRtrAdvertisements indicates the number of ICMP Router Advertisement messages sent by this router instance." ::= { vRtrIcmp6Entry 28 } vRtrIcmp6OutNbrSolicits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6OutNbrSolicits indicates the number of ICMP Neighbor Solicitation messages sent by this router instance." ::= { vRtrIcmp6Entry 29 } vRtrIcmp6OutNbrAdvertisements OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6OutNbrAdvertisements indicates the number of ICMP Neighbor Advertisement messages sent by this router instance." ::= { vRtrIcmp6Entry 30 } vRtrIcmp6OutRedirects OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6OutRedirects indicates the number of ICMP Redirect messages sent by this router instance." ::= { vRtrIcmp6Entry 31 } vRtrIcmp6OutGrpMembQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6OutGrpMembQueries indicates the number of ICMP Group Membership Query messages sent by this router instance." ::= { vRtrIcmp6Entry 32 } vRtrIcmp6OutGrpMembResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6OutGrpMembResponses indicates the number of ICMP Group Membership Response messages sent by this router instance." ::= { vRtrIcmp6Entry 33 } vRtrIcmp6OutGrpMembReductions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6OutGrpMembReductions indicates the number of ICMP Group Membership Reduction messages sent by this router instance." ::= { vRtrIcmp6Entry 34 } -- -- Virtual Router Interface ICMPv6 Statistics Table -- vRtrIfIcmp6Table OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIfIcmp6Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrIfIcmp6Table table contains statistics of ICMPv6 messages that are received and sourced by a router interface." ::= { tmnxVRtrObjs 32 } vRtrIfIcmp6Entry OBJECT-TYPE SYNTAX VRtrIfIcmp6Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents the ICMP statistics of a virtual router interface. Entries are created and deleted when entries in the vRtrIfTable are created and deleted." AUGMENTS { vRtrIfEntry } ::= { vRtrIfIcmp6Table 1 } VRtrIfIcmp6Entry ::= SEQUENCE { vRtrIfIcmp6InMsgs Counter32, vRtrIfIcmp6InErrors Counter32, vRtrIfIcmp6InDestUnreachs Counter32, vRtrIfIcmp6InAdminProhibs Counter32, vRtrIfIcmp6InTimeExcds Counter32, vRtrIfIcmp6InParmProblems Counter32, vRtrIfIcmp6InPktTooBigs Counter32, vRtrIfIcmp6InEchos Counter32, vRtrIfIcmp6InEchoReplies Counter32, vRtrIfIcmp6InRtrSolicits Counter32, vRtrIfIcmp6InRtrAdvertisements Counter32, vRtrIfIcmp6InNbrSolicits Counter32, vRtrIfIcmp6InNbrAdvertisements Counter32, vRtrIfIcmp6InRedirects Counter32, vRtrIfIcmp6InGrpMembQueries Counter32, vRtrIfIcmp6InGrpMembResponses Counter32, vRtrIfIcmp6InGrpMembReductions Counter32, vRtrIfIcmp6OutMsgs Counter32, vRtrIfIcmp6OutErrors Counter32, vRtrIfIcmp6OutDestUnreachs Counter32, vRtrIfIcmp6OutAdminProhibs Counter32, vRtrIfIcmp6OutTimeExcds Counter32, vRtrIfIcmp6OutParmProblems Counter32, vRtrIfIcmp6OutPktTooBigs Counter32, vRtrIfIcmp6OutEchos Counter32, vRtrIfIcmp6OutEchoReplies Counter32, vRtrIfIcmp6OutRtrSolicits Counter32, vRtrIfIcmp6OutRtrSolicitsTime TimeStamp, vRtrIfIcmp6OutRtrAdvertisements Counter32, vRtrIfIcmp6OutRtrAdvTime TimeStamp, vRtrIfIcmp6OutNbrSolicits Counter32, vRtrIfIcmp6OutNbrSolicitsTime TimeStamp, vRtrIfIcmp6OutNbrAdvertisements Counter32, vRtrIfIcmp6OutNbrAdvTime TimeStamp, vRtrIfIcmp6OutRedirects Counter32, vRtrIfIcmp6OutGrpMembQueries Counter32, vRtrIfIcmp6OutGrpMembResponses Counter32, vRtrIfIcmp6OutGrpMembReductions Counter32 } vRtrIfIcmp6InMsgs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6InMsgs indicates the total number of ICMP messages received by this interface which includes all those counted by vRtrIfIcmp6InErrors. Note that this interface is the interface to which the ICMP messages were addressed which may not be necessarily the input interface for the messages." ::= { vRtrIfIcmp6Entry 1 } vRtrIfIcmp6InErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6InErrors indicates the number of ICMP messages which this interface received but determined as having ICMP-specific errors (bad ICMP checksums, bad length , etc.)." ::= { vRtrIfIcmp6Entry 2 } vRtrIfIcmp6InDestUnreachs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6InDestUnreachs indicates the number of ICMP Destination Unreachable messages received by this interface." ::= { vRtrIfIcmp6Entry 3 } vRtrIfIcmp6InAdminProhibs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6InAdminProhibs indicates the number of ICMP destination unreachable/communication administratively prohibited messages received by this interface." ::= { vRtrIfIcmp6Entry 4 } vRtrIfIcmp6InTimeExcds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6InTimeExcds indicates the number of ICMP Time Exceeded messages received by this interface." ::= { vRtrIfIcmp6Entry 5 } vRtrIfIcmp6InParmProblems OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6InParmProblems indicates the number of ICMP Parameter Problem messages received by this interface." ::= { vRtrIfIcmp6Entry 6 } vRtrIfIcmp6InPktTooBigs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6InPktTooBigs indicates the number of ICMP Packet Too Big messages received by this interface." ::= { vRtrIfIcmp6Entry 7 } vRtrIfIcmp6InEchos OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6InEchos indicates the number of ICMP Echo (request) messages received by this interface." ::= { vRtrIfIcmp6Entry 8 } vRtrIfIcmp6InEchoReplies OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6InEchoReplies indicates the number of ICMP Echo Reply messages received by this interface." ::= { vRtrIfIcmp6Entry 9 } vRtrIfIcmp6InRtrSolicits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6InRtrSolicits indicates the number of ICMP Router Solicit messages received by this interface." ::= { vRtrIfIcmp6Entry 10 } vRtrIfIcmp6InRtrAdvertisements OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6InRtrAdvertisements indicates the number of ICMP Router Advertisement messages received by this interface." ::= { vRtrIfIcmp6Entry 11 } vRtrIfIcmp6InNbrSolicits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6InNbrSolicits indicates the number of ICMP Neighbor Solicit messages received by this interface." ::= { vRtrIfIcmp6Entry 12 } vRtrIfIcmp6InNbrAdvertisements OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6InNbrAdvertisements indicates the number of ICMP Neighbor Advertisement messages received by this interface." ::= { vRtrIfIcmp6Entry 13 } vRtrIfIcmp6InRedirects OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6InRedirects indicates number of ICMP Redirect messages received by this interface." ::= { vRtrIfIcmp6Entry 14 } vRtrIfIcmp6InGrpMembQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6InGrpMembQueries indicates the number of ICMP Group Membership Query messages received by this interface." ::= { vRtrIfIcmp6Entry 15 } vRtrIfIcmp6InGrpMembResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6InGrpMembResponses indicates the number of ICMP Group Membership Response messages received by this interface." ::= { vRtrIfIcmp6Entry 16 } vRtrIfIcmp6InGrpMembReductions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6InGrpMembReductions indicates the number of ICMP Group Membership Reduction messages received by this interface." ::= { vRtrIfIcmp6Entry 17 } vRtrIfIcmp6OutMsgs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutMsgs indicates the total number of ICMP messages which this interface attempted to send. Note that this counter includes all those counted by icmpOutErrors." ::= { vRtrIfIcmp6Entry 18 } vRtrIfIcmp6OutErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutErrors indicates the number of ICMP messages which this interface did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of VRtrIpv6 to route the resultant datagram. In some implementations there may be no types of error which contribute to this counter's value." ::= { vRtrIfIcmp6Entry 19 } vRtrIfIcmp6OutDestUnreachs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutDestUnreachs indicates the number of ICMP Destination Unreachable messages sent by this interface." ::= { vRtrIfIcmp6Entry 20 } vRtrIfIcmp6OutAdminProhibs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutAdminProhibs indicates the number of ICMP destination unreachable/communication administratively prohibited messages sent by this interface." ::= { vRtrIfIcmp6Entry 21 } vRtrIfIcmp6OutTimeExcds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutTimeExcds indicates the number of ICMP Time Exceeded messages sent by this interface." ::= { vRtrIfIcmp6Entry 22 } vRtrIfIcmp6OutParmProblems OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutParmProblems indicates the number of ICMP Parameter Problem messages sent by this interface." ::= { vRtrIfIcmp6Entry 23 } vRtrIfIcmp6OutPktTooBigs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutPktTooBigs indicates the number of ICMP Packet Too Big messages sent by this interface." ::= { vRtrIfIcmp6Entry 24 } vRtrIfIcmp6OutEchos OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutEchos indicates the number of ICMP Echo Request messages sent by this interface." ::= { vRtrIfIcmp6Entry 25 } vRtrIfIcmp6OutEchoReplies OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutEchoReplies indicates the number of ICMP Echo Reply messages sent by this interface." ::= { vRtrIfIcmp6Entry 26 } vRtrIfIcmp6OutRtrSolicits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutRtrSolicits indicates the number of ICMP Router Solicitation messages sent by this interface." ::= { vRtrIfIcmp6Entry 27 } vRtrIfIcmp6OutRtrSolicitsTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutRtrSolicitsTime indicates the system time when the last router solicitation message was sent by this interface." ::= { vRtrIfIcmp6Entry 28 } vRtrIfIcmp6OutRtrAdvertisements OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutRtrAdvertisements indicates the number of ICMP Router Advertisement messages sent by this interface." ::= { vRtrIfIcmp6Entry 29 } vRtrIfIcmp6OutRtrAdvTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutRtrAdvTime indicates the system time when the last router advertisement message was sent by this interface." ::= { vRtrIfIcmp6Entry 30 } vRtrIfIcmp6OutNbrSolicits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutNbrSolicits indicates the number of ICMP Neighbor Solicitation messages sent by this interface." ::= { vRtrIfIcmp6Entry 31 } vRtrIfIcmp6OutNbrSolicitsTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutNbrSolicitsTime indicates the system time when the last neighbor solicitation message was sent by this interface." ::= { vRtrIfIcmp6Entry 32 } vRtrIfIcmp6OutNbrAdvertisements OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutNbrAdvertisements indicates the number of ICMP Neighbor Advertisement messages sent by this interface." ::= { vRtrIfIcmp6Entry 33 } vRtrIfIcmp6OutNbrAdvTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutNbrAdvTime indicates the system time when the last neighbor advertisement message was sent by this interface." ::= { vRtrIfIcmp6Entry 34 } vRtrIfIcmp6OutRedirects OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutRedirects indicates the number of ICMP Redirect messages sent by this interface." ::= { vRtrIfIcmp6Entry 35 } vRtrIfIcmp6OutGrpMembQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutGrpMembQueries indicates the number of ICMP Group Membership Query messages sent by this interface." ::= { vRtrIfIcmp6Entry 36 } vRtrIfIcmp6OutGrpMembResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutGrpMembResponses indicates the number of ICMP Group Membership Response messages sent by this interface." ::= { vRtrIfIcmp6Entry 37 } vRtrIfIcmp6OutGrpMembReductions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutGrpMembReductions indicates the number of ICMP Group Membership Reduction messages sent by this interface." ::= { vRtrIfIcmp6Entry 38 } -- -- Virtual Router Interface Bi-directional Forwarding Detection table -- vRtrIfBfdTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIfBfdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrIfBfdTable table contains the configuration for Bi-directional Forwarding Detection (BFD) on the vRtrIfEntry with the same indices." ::= { tmnxVRtrObjs 33 } vRtrIfBfdEntry OBJECT-TYPE SYNTAX VRtrIfBfdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents the BFD configuration for an interface. Entries are created and deleted when entries in the vRtrIfTable are created and deleted." AUGMENTS { vRtrIfEntry } ::= { vRtrIfBfdTable 1 } VRtrIfBfdEntry ::= SEQUENCE { vRtrIfBfdAdminState TmnxAdminState, vRtrIfBfdTransmitInterval Unsigned32, vRtrIfBfdReceiveInterval Unsigned32, vRtrIfBfdMultiplier Unsigned32, vRtrIfBfdEchoInterval Unsigned32 } vRtrIfBfdAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrIfBfdAdminState specifies the admin state of BFD on this interface. When it is 'inService', BFD sessions can be established on this interface. When it is 'outOfService', they cannot." ::= { vRtrIfBfdEntry 1 } vRtrIfBfdTransmitInterval OBJECT-TYPE SYNTAX Unsigned32 (100..100000) --100..100k UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrIfBfdTransmitInterval specifies the BFD transmit interval over this interface." DEFVAL { 100 } ::= { vRtrIfBfdEntry 2 } vRtrIfBfdReceiveInterval OBJECT-TYPE SYNTAX Unsigned32 (100..100000) --100..100k UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrIfBfdReceiveInterval specifies the BFD receive interval over this interface." DEFVAL { 100 } ::= { vRtrIfBfdEntry 3 } vRtrIfBfdMultiplier OBJECT-TYPE SYNTAX Unsigned32 (3..20) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrIfBfdMultiplier specifies the the number of consecutive BFD messages that must be missed from the peer before the BFD session state is changed to down and the upper level protocols (OSPF, IS-IS or PIM) are notified of the fault." DEFVAL { 3 } ::= { vRtrIfBfdEntry 4 } vRtrIfBfdEchoInterval OBJECT-TYPE SYNTAX Unsigned32 (0|100..100000) --100..100k UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrIfBfdEchoInterval specifies the BFD echo interval over this interface." DEFVAL { 0 } ::= { vRtrIfBfdEntry 5 } -- -- Virtual Router BFD session table -- vRtrIfBfdSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIfBfdSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrIfBfdSessionTable table contains per BFD session statistics and operational settings." ::= { tmnxVRtrObjs 34 } vRtrIfBfdSessionEntry OBJECT-TYPE SYNTAX VRtrIfBfdSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a BFD session. Entries are created automatically by the system, or when a static-route is configured to use BFD." INDEX { vRtrID, vRtrIfIndex, vRtrIfBfdSessionLclAddrType, vRtrIfBfdSessionLclAddr, vRtrIfBfdSessionRemAddrType, vRtrIfBfdSessionRemAddr } ::= { vRtrIfBfdSessionTable 1 } VRtrIfBfdSessionEntry ::= SEQUENCE { vRtrIfBfdSessionLclAddrType InetAddressType, vRtrIfBfdSessionLclAddr InetAddress, vRtrIfBfdSessionRemAddrType InetAddressType, vRtrIfBfdSessionRemAddr InetAddress, vRtrIfBfdSessionOperState TmnxOperState, vRtrIfBfdSessionState INTEGER, vRtrIfBfdSessionOperFlags BITS, vRtrIfBfdSessionMesgRecv Counter32, vRtrIfBfdSessionMesgSent Counter32, vRtrIfBfdSessionLastDownTime TimeStamp, vRtrIfBfdSessionLastUpTime TimeStamp, vRtrIfBfdSessionUpCount Counter32, vRtrIfBfdSessionDownCount Counter32, vRtrIfBfdSessionLclDisc Unsigned32, vRtrIfBfdSessionRemDisc Unsigned32, vRtrIfBfdSessionProtocols BITS, vRtrIfBfdSessionTxInterval Unsigned32, vRtrIfBfdSessionRxInterval Unsigned32, vRtrIfBfdSessionType INTEGER } vRtrIfBfdSessionLclAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrIfBfdSessionLclAddrType indicates the address type in vRtrIfBfdSessionLclAddr." ::= { vRtrIfBfdSessionEntry 1 } vRtrIfBfdSessionLclAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(0|4)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrIfBfdSessionLclAddr indicates the address of the local endpoint of this BFD session. Its type is specified by vRtrIfBfdSessionLclAddrType." ::= { vRtrIfBfdSessionEntry 2 } vRtrIfBfdSessionRemAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrIfBfdSessionRemAddrType indicates the address type in vRtrIfBfdSessionRemAddr." ::= { vRtrIfBfdSessionEntry 3 } vRtrIfBfdSessionRemAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(0|4)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrIfBfdSessionRemAddr indicates the address of the local endpoint of this BFD session. Its type is specified by vRtrIfBfdSessionRemAddrType." ::= { vRtrIfBfdSessionEntry 4 } vRtrIfBfdSessionOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdSessionOperState indicates the operational state of BFD on this interface." ::= { vRtrIfBfdSessionEntry 5 } vRtrIfBfdSessionState OBJECT-TYPE SYNTAX INTEGER { adminDown (0), --Session is administratively down down (1), --Session is down init (2), --Session is initializing up (3) --Session is up } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdSessionState indicates the state of the BFD protocl on this interface." ::= { vRtrIfBfdSessionEntry 6 } vRtrIfBfdSessionOperFlags OBJECT-TYPE SYNTAX BITS { noProtocols (0), noHeartBeat (1), echoFailed (2), nbrSignalDown (3), fwdPlaneReset (4), pathDown (5), nbrAdminDown (6), adminClear (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdSessionOperFlags indicates the reasons why a BFD session is not up." ::= { vRtrIfBfdSessionEntry 7 } vRtrIfBfdSessionMesgRecv OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdSessionMesgRecv indicates the number of messages received in this session." ::= { vRtrIfBfdSessionEntry 8 } vRtrIfBfdSessionMesgSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdSessionMesgSent indicates the number of messages sent in this session." ::= { vRtrIfBfdSessionEntry 9 } vRtrIfBfdSessionLastDownTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdSessionLastDownTime indicates the system time when this session last went down." ::= { vRtrIfBfdSessionEntry 10 } vRtrIfBfdSessionLastUpTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdSessionLastUpTime indicates the system time when this session last came up." ::= { vRtrIfBfdSessionEntry 11 } vRtrIfBfdSessionUpCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdSessionUpCount indicates the number of times vRtrIfBfdSessionOperState changed from 'outOfService' to 'inService'." ::= { vRtrIfBfdSessionEntry 12 } vRtrIfBfdSessionDownCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdSessionDownCount indicates the number of times vRtrIfBfdSessionOperState changed from 'inService' to 'outOfService'." ::= { vRtrIfBfdSessionEntry 13 } vRtrIfBfdSessionLclDisc OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdSessionLclDisc indicates the unique local discriminator for this session." ::= { vRtrIfBfdSessionEntry 14 } vRtrIfBfdSessionRemDisc OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdSessionRemDisc indicates the remote discriminator for this session." ::= { vRtrIfBfdSessionEntry 15 } vRtrIfBfdSessionProtocols OBJECT-TYPE SYNTAX BITS { ospfv2 (0), pim (1), isis (2), staticRoute (3), mcRing (4), rsvp (5), bgp (6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdSessionProtocols indicates which protocols are using this BFD session." ::= { vRtrIfBfdSessionEntry 16 } vRtrIfBfdSessionTxInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdSessionTxInterval indicates the negotiated transmit interval. This value is the minimum of the local node's 'vRtrIfBfdTransmitInterval' and the remote node's receive interval." ::= { vRtrIfBfdSessionEntry 17 } vRtrIfBfdSessionRxInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdSessionRxInterval indicates the negotiated receive interval. This value is the minimum of the local node's 'vRtrIfBfdReceiveInterval' and the remote node's transmit interval." ::= { vRtrIfBfdSessionEntry 18 } vRtrIfBfdSessionType OBJECT-TYPE SYNTAX INTEGER { iom (1), --Session is running on IOM cpm (2) --Session is running on CPM } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdSessionType indicates if the bfd session is running on IOM or CPM." ::= { vRtrIfBfdSessionEntry 19 } -- -- Alcatel 7x50 SR series Virtual Router Interface Proxy ARP Table -- -- Augmentation of the vRtrIfTable. -- Use of AUGMENTS clause implies a one-to-one dependent relationship -- between the base table, vRtrIfTable, and the augmenting table, -- vRtrIfProxyArpTable. This in effect extends the vRtrIfTable with -- additional columns. Creation (or deletion) of a row in the -- vRtrIfTable results in the same fate for the row in the -- vRtrIfProxyArpTable. -- vRtrIfProxyArpTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIfProxyArpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrIfProxyArpTable provides an extension to the vRtrIfTable. It has an entry for each virtual router interface configured in the system." ::= { tmnxVRtrObjs 18 } vRtrIfProxyArpEntry OBJECT-TYPE SYNTAX VRtrIfProxyArpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents information related to Proxy ARP for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations." AUGMENTS { vRtrIfEntry } ::= { vRtrIfProxyArpTable 1 } VRtrIfProxyArpEntry ::= SEQUENCE { vRtrIfProxyArp TruthValue, vRtrIfProxyArpLocal TruthValue, vRtrIfProxyArpPolicy1 TPolicyStatementNameOrEmpty, vRtrIfProxyArpPolicy2 TPolicyStatementNameOrEmpty, vRtrIfProxyArpPolicy3 TPolicyStatementNameOrEmpty, vRtrIfProxyArpPolicy4 TPolicyStatementNameOrEmpty, vRtrIfProxyArpPolicy5 TPolicyStatementNameOrEmpty } vRtrIfProxyArp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If the value of vRtrIfProxyArp is set to 'true', proxy ARP is enabled on this interface. If this value is 'false', proxy ARP is disabled on the interface." DEFVAL { false } ::= { vRtrIfProxyArpEntry 1 } vRtrIfProxyArpLocal OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If the value of vRtrIfProxyArpLocal is set to 'true', local proxy ARP is enabled, that is, the interface will reply to ARP requests even if both the hosts are on the same subnet. In this case ICMP redirects will be disabled. If the value of vRtrIfProxyArpLocal is set to 'false', the interface will not reply to ARP requests if both the hosts are on the same subnet." DEFVAL { false } ::= { vRtrIfProxyArpEntry 2 } vRtrIfProxyArpPolicy1 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfProxyArpPolicy1 is used to specify the first proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy1 has no effect if vRtrIfProxyArp is set to 'false'." DEFVAL { ''H } -- the empty string ::= { vRtrIfProxyArpEntry 3 } vRtrIfProxyArpPolicy2 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfProxyArpPolicy2 is used to specify the second proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy2 has no effect if vRtrIfProxyArp is set to 'false'." DEFVAL { ''H } -- the empty string ::= { vRtrIfProxyArpEntry 4 } vRtrIfProxyArpPolicy3 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfProxyArpPolicy3 is used to specify the third proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy3 has no effect if vRtrIfProxyArp is set to 'false'." DEFVAL { ''H } -- the empty string ::= { vRtrIfProxyArpEntry 5 } vRtrIfProxyArpPolicy4 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfProxyArpPolicy4 is used to specify the fourth proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy4 has no effect if vRtrIfProxyArp is set to 'false'." DEFVAL { ''H } -- the empty string ::= { vRtrIfProxyArpEntry 6 } vRtrIfProxyArpPolicy5 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfProxyArpPolicy5 is used to specify the fifth proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy5 has no effect if vRtrIfProxyArp is set to 'false'." DEFVAL { ''H } -- the empty string ::= { vRtrIfProxyArpEntry 7 } -- -- Alcatel 7x50 SR series Virtual Router Interface DHCP Relay Table -- -- Augmentation of the vRtrIfTable. -- Use of AUGMENTS clause implies a one-to-one dependent relationship -- between the base table, vRtrIfTable, and the augmenting table, -- vRtrIfDHCPTable. This in effect extends the vRtrIfTable with -- additional columns. Creation (or deletion) of a row in the -- vRtrIfTable results in the same fate for the row in the -- vRtrIfDHCPTable. -- vRtrIfDHCPTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIfDHCPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrIfDHCPTable is used to configure the interface parameters for the DHCP Relay agent." ::= { tmnxVRtrObjs 19 } vRtrIfDHCPEntry OBJECT-TYPE SYNTAX VRtrIfDHCPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents information related to DHCP Relay for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations." AUGMENTS { vRtrIfEntry } ::= { vRtrIfDHCPTable 1 } VRtrIfDHCPEntry ::= SEQUENCE { vRtrIfDHCPRelayInfoOption TruthValue, vRtrIfDHCPRelayInfoAction INTEGER, vRtrIfDHCPRelayCircuitId INTEGER, vRtrIfDHCPRelayRemoteId INTEGER, vRtrIfDHCPAutoFilter Unsigned32, vRtrIfDHCPRelayServer1 IpAddress, vRtrIfDHCPRelayServer2 IpAddress, vRtrIfDHCPRelayServer3 IpAddress, vRtrIfDHCPRelayServer4 IpAddress, vRtrIfDHCPRelayServer5 IpAddress, vRtrIfDHCPRelayServer6 IpAddress, vRtrIfDHCPRelayServer7 IpAddress, vRtrIfDHCPRelayServer8 IpAddress, vRtrIfDHCPRelayTrusted TruthValue, vRtrIfDHCPAdminState TmnxAdminState, vRtrIfDHCPSnooping INTEGER, vRtrIfDHCPDescription TItemDescription, vRtrIfDHCPAutoFilterId TFilterID, vRtrIfDHCPOperAutoFilter Unsigned32, vRtrIfDHCPAuthPolicy TPolicyStatementNameOrEmpty, vRtrIfDHCPLeasePopulate Unsigned32, vRtrIfDHCPOperLeasePopulate Unsigned32, vRtrIfDHCPGiAddressType InetAddressType, vRtrIfDHCPGiAddress InetAddress, vRtrIfDHCPGiAddressAsSrc TruthValue, vRtrIfDHCPMatchOption82 TruthValue, vRtrIfDHCPRelayRemoteIdStr DisplayString, vRtrIfDHCPProxyAdminState TmnxAdminState, vRtrIfDHCPProxyServerAddr IpAddress, vRtrIfDHCPProxyLeaseTime Unsigned32, vRtrIfDHCPProxyLTRadiusOverride TruthValue, vRtrIfDHCPVendorIncludeOptions BITS, vRtrIfDHCPVendorOptionString DisplayString, vRtrIfDHCPLayer2Header TruthValue, vRtrIfDHCPAntiSpoofMacAddr MacAddress, vRtrIfDHCPClientApplications BITS } vRtrIfDHCPRelayInfoOption OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS obsolete DESCRIPTION "vRtrIfDHCPRelayInfoOption is used to enable/disable DHCP Option 82. If the value of this object is set to 'false', DHCP Relay is disabled." DEFVAL { false } ::= { vRtrIfDHCPEntry 1 } vRtrIfDHCPRelayInfoAction OBJECT-TYPE SYNTAX INTEGER { replace (1), drop (2), keep (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrIfDHCPRelayInfoAction is used to configure the DHCP Relay reforwarding policy. replace(1) - replace existing information with DHCP relay information drop(2) - discard messages with existing relay information if the option-82 information is also present. keep(3) - retain the existing relay information." DEFVAL { keep } ::= { vRtrIfDHCPEntry 2 } vRtrIfDHCPRelayCircuitId OBJECT-TYPE SYNTAX INTEGER { none (0), ifIndex (1), asciiTuple (2), sapId (3), vlanAsciiTuple (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCPRelayCircuitId specifies whether or not the circuit-id suboption is present, and if it is present what information goes in it. If the value of this object is set to 'none', the circuit-id suboption will not be part of the information option (option 82). If the value of this object is set to 'ifIndex', the value of the interface index is used. If the value of this object is set to 'asciiTuple', the ASCII-encoded concatenated tuple consisting of the - access-node-identifier - service-id - interface-name - SAP-id (only if the value of vRtrIfType is 'serviceIesGroup') is used. If the value of this object is set to 'sapId', the ASCII-encoded SAP-id is used. If the value of this object is set to 'vlan-ascii-tuple' - the format will include VLAN-id and dot1p bits in addition to what is included in ascii-tuple already. The format is supported on dot1q and qinq encapsulated ports only. Thus, when the option 82 bits are stripped, dot1p bits will be copied to the Ethernet header of an outgoing packet." DEFVAL { asciiTuple } ::= { vRtrIfDHCPEntry 3 } vRtrIfDHCPRelayRemoteId OBJECT-TYPE SYNTAX INTEGER { mac (1), none (2), remote-id (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCPRelayRemoteId specifies what information goes into the remote-id suboption in the DHCP Relay packet. If the value of this object is set to 'none', the remote-id suboption is left blank. If the value of this object is set to 'mac', the MAC address of the remote end is encoded in the suboption. If the value of the object is set to 'remote-id', vRtrIfDHCPRelayRemoteIdStr will be the remote-id." DEFVAL { none } ::= { vRtrIfDHCPEntry 4 } vRtrIfDHCPAutoFilter OBJECT-TYPE SYNTAX Unsigned32 (0..2000) MAX-ACCESS read-create STATUS obsolete DESCRIPTION "vRtrIfDHCPAutoFilter allows the router to automatically build anti-spoofing filter lists. When this object is set to a non-zero value, auto-filtering is enabled and a filter allowing only PPPoE or DHCP traffic is established on the interface. The non-zero value indicates the maximum number of entries that the auto-filter can have. These entries are created by the agent upon snooping a valid DHCP Reply packet and are used to allow traffic sourced by the given DHCP-assigned IP address." DEFVAL { 0 } ::= { vRtrIfDHCPEntry 5 } vRtrIfDHCPRelayServer1 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrIfDHCPRelayServer1 is used to configure the first DHCP server where the requests will be forwarded." DEFVAL { '00000000'H } -- 0.0.0.0 ::= { vRtrIfDHCPEntry 6 } vRtrIfDHCPRelayServer2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrIfDHCPRelayServer2 is used to configure the second DHCP server where the requests will be forwarded." DEFVAL { '00000000'H } ::= { vRtrIfDHCPEntry 7 } vRtrIfDHCPRelayServer3 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrIfDHCPRelayServer3 is used to configure the third DHCP server where the requests will be forwarded." DEFVAL { '00000000'H } ::= { vRtrIfDHCPEntry 8 } vRtrIfDHCPRelayServer4 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrIfDHCPRelayServer4 is used to configure the fourth DHCP server where the requests will be forwarded." DEFVAL { '00000000'H } ::= { vRtrIfDHCPEntry 9 } vRtrIfDHCPRelayServer5 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrIfDHCPRelayServer5 is used to configure the fifth DHCP server where the requests will be forwarded." DEFVAL { '00000000'H } ::= { vRtrIfDHCPEntry 10 } vRtrIfDHCPRelayServer6 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrIfDHCPRelayServer6 is used to configure the sixth DHCP server where the requests will be forwarded." DEFVAL { '00000000'H } ::= { vRtrIfDHCPEntry 11 } vRtrIfDHCPRelayServer7 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrIfDHCPRelayServer7 is used to configure the seventh DHCP server where the requests will be forwarded." DEFVAL { '00000000'H } ::= { vRtrIfDHCPEntry 12 } vRtrIfDHCPRelayServer8 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrIfDHCPRelayServer8 is used to configure the eighth DHCP server where the requests will be forwarded." DEFVAL { '00000000'H } ::= { vRtrIfDHCPEntry 13 } vRtrIfDHCPRelayTrusted OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When the value of vRtrIfDHCPRelayTrusted is set to 'true(1)', the router will relay requests where the DHCP giaddr is zero." DEFVAL { false } ::= { vRtrIfDHCPEntry 14 } vRtrIfDHCPAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrIfDHCPAdminState is used to configure the desired administrative state of DHCP on this interface. If the value of vRtrIfType is network this object can only be set to 'outOfService'." DEFVAL { outOfService } ::= { vRtrIfDHCPEntry 15 } vRtrIfDHCPSnooping OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS obsolete DESCRIPTION "vRtrIfDHCPSnooping is used to enable/disable snooping of DHCP packets received on interface." DEFVAL { disabled } ::= { vRtrIfDHCPEntry 16 } vRtrIfDHCPDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCPDescription is a user provided description string for DHCP on this virtual router interface. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length." DEFVAL { ''H } -- the empty string ::= { vRtrIfDHCPEntry 17 } vRtrIfDHCPAutoFilterId OBJECT-TYPE SYNTAX TFilterID MAX-ACCESS read-only STATUS obsolete DESCRIPTION "vRtrIfDHCPAutoFilterId maintains the auto-filter identifier being used for this interface." ::= { vRtrIfDHCPEntry 18 } vRtrIfDHCPOperAutoFilter OBJECT-TYPE SYNTAX Unsigned32 (0..2000) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of vRtrIfDHCPOperAutoFilter indicates the number of active auto-filter entries per interface. These entries are created in the ALCATEL-IND1-TIMETRA-FILTER-MIB::tIPFilterTable by the agent by snooping valid 'DHCP ACK' messages." DEFVAL { 0 } ::= { vRtrIfDHCPEntry 19 } vRtrIfDHCPAuthPolicy OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "Defines which subscriber authentication policy must be applied when a subscriber message (e.g. DHCP, PPPoE, ...) is received on the interface. The authentication policy must be defined in tmnxSubAuthPlcyTable." DEFVAL { ''H } ::= { vRtrIfDHCPEntry 20 } vRtrIfDHCPLeasePopulate OBJECT-TYPE SYNTAX Unsigned32 (0..8000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCPLeasePopulate specifies the maximum number of DHCP lease states allowed on this interface." DEFVAL { 0 } ::= { vRtrIfDHCPEntry 21 } vRtrIfDHCPOperLeasePopulate OBJECT-TYPE SYNTAX Unsigned32 (0..8000) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrIfDHCPOperLeasePopulate indicates the maximum number of DHCP lease states allocated on this interface." ::= { vRtrIfDHCPEntry 22 } vRtrIfDHCPGiAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCPGiAddressType specifies the type of vRtrIfDHCPGiAddress, the gateway interface address." DEFVAL { unknown } ::= { vRtrIfDHCPEntry 23 } vRtrIfDHCPGiAddress OBJECT-TYPE SYNTAX InetAddress (SIZE(0|4)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCPGiAddress specifies the gateway interface address. The type of this address is specified by the value of vRtrIfDHCPGiAddressType." DEFVAL { ''H } ::= { vRtrIfDHCPEntry 24 } vRtrIfDHCPGiAddressAsSrc OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCPGiAddressAsSrc specifies whether the DHCP relay should use the gateway interface address as the source IP address when communicating with the DHCP server. When it is set to 'true(1)', the source IP address used to communicate with the DHCP server is the gateway interface address. When it is 'false', the source IP is the IP of the egress interface the IP packet goes out on." DEFVAL { false } ::= { vRtrIfDHCPEntry 25 } vRtrIfDHCPMatchOption82 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCPMatchOption82 specifies whether the DHCP relay should use the circuit ID in the option 82 field in DHCP packets to match DHCP messages. When it is set to 'true(1)', the option 82 circuit ID is used in addition to the MAC address and transaction ID. When it is set to 'false', only the MAC address and transaction ID are used." DEFVAL { false } ::= { vRtrIfDHCPEntry 26 } vRtrIfDHCPRelayRemoteIdStr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCPRelayRemoteIdStr specifies the remote-id in the DHCP Relay packet if value of vRtrIfDHCPRelayRemoteId is set to 'remote-id'." DEFVAL { "" } ::= { vRtrIfDHCPEntry 27 } vRtrIfDHCPProxyAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCPProxyAdminState specifies the desired administrative state of the proxy server on this interface. When it is set to 'inService', the proxy server is enabled only if vRtrIfDHCPAdminState is also set to 'inService'." DEFVAL { outOfService } ::= { vRtrIfDHCPEntry 28 } vRtrIfDHCPProxyServerAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCPProxyServerAddr specifies the IP address which will be used as the source address of the emulated DHCP server. If this IP address is not configured, the value of vRiaIpAddress will be used as the source address of the emulated DHCP server." DEFVAL { '00000000'H } -- 0.0.0.0 means not-set ::= { vRtrIfDHCPEntry 29 } vRtrIfDHCPProxyLeaseTime OBJECT-TYPE SYNTAX Unsigned32 (0|300..315446399) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCPProxyLeaseTime specifies in seconds how long a DHCP client is allowed to use the offered IP address. Value 0 means the lease time provided by a RADIUS or an upstream DHCP server will not be overridden. A lease time of 7 days is used when RADIUS does not provide a lease time." DEFVAL { 0 } ::= { vRtrIfDHCPEntry 30 } vRtrIfDHCPProxyLTRadiusOverride OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCPProxyLTRadiusOverride specifies whether or not the lease time provided by the RADIUS server is presented to the DHCP client. By default the proxy-server will always make use of vRtrIfDHCPProxyLeaseTime, regardless of what lease time information is provided from the RADIUS server. When vRtrIfDHCPProxyLTRadiusOverride is set to 'true(1)', the proxy-server will use the lease time information provided by the RADIUS server, regardless of the configured one." DEFVAL { false } ::= { vRtrIfDHCPEntry 31 } vRtrIfDHCPVendorIncludeOptions OBJECT-TYPE SYNTAX BITS { systemId (0), clientMac (1), serviceId (2), sapId (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCPVendorIncludeOptions specifies what is encoded in the Alcatel vendor specific sub-option of option 82. The value of this object is only used when vRtrIfDHCPRelayInfoAction is 'replace(1)'." DEFVAL { { systemId } } ::= { vRtrIfDHCPEntry 32 } vRtrIfDHCPVendorOptionString OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCPVendorOptionString specifies the string that goes into the Alcatel vendor specific sub-option of option 82. This string is only used when vRtrIfDHCPRelayInfoAction is set to 'replace(1)'." DEFVAL { "" } ::= { vRtrIfDHCPEntry 33 } vRtrIfDHCPLayer2Header OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCPLayer2Header specificies, together with the value of object vRtrIfDHCPAntiSpoofMacAddr, the MAC address that is used in anti-spoof entries for the lease states on this interface. When it is set to 'false (2)', the client hardware address from the DHCP payload, stored in ALCATEL-IND1-TIMETRA-SERV-MIB::svcDhcpLseStateChAddr, is used. When it is set to 'true (1)', the behavior depends on the value of vRtrIfDHCPAntiSpoofMacAddr. If vRtrIfDHCPAntiSpoofMacAddr is set to all zeros, the source MAC address in the L2 header of the DHCP packet is used. If vRtrIfDHCPAntiSpoofMacAddr is configured, then its value is used." DEFVAL { false } ::= { vRtrIfDHCPEntry 34 } vRtrIfDHCPAntiSpoofMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCPAntiSpoofMacAddr specifies, together with the value of object vRtrIfDHCPLayer2Header, the MAC address that is used in anti-spoof entries for the lease states on this interface. When vRtrIfDHCPLayer2Header is 'false (2)', the client hardware address from the DHCP payload, stored in ALCATEL-IND1-TIMETRA-SERV-MIB::svcDhcpLseStateChAddr, is used. When vRtrIfDHCPLayer2Header is 'true (1)' and the value of this object is all zeros, the source MAC address in the L2 header of the DHCP packet is used. When vRtrIfDHCPLayer2Header is 'true (1)' and the value of this object is not all zeros, then this value is used. This object can only be configured if the value of object vRtrIfDHCPLayer2Header is set to 'true (1)'." DEFVAL { '000000000000'H } ::= { vRtrIfDHCPEntry 35 } vRtrIfDHCPClientApplications OBJECT-TYPE SYNTAX BITS { dhcp (0), pppoe (1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCPClientApplications specifies the set of client applications that can make use of the DHCP relay functionality on this interface." DEFVAL { { dhcp } } ::= { vRtrIfDHCPEntry 36 } -- -- DHCP Relay Statistics Table -- vRtrIfDHCPRelayStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIfDHCPRelayStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrIfDHCPRelayStatsTable contains the statistics for the DHCP Relay agent." ::= { tmnxVRtrObjs 20 } vRtrIfDHCPRelayStatsEntry OBJECT-TYPE SYNTAX VRtrIfDHCPRelayStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents information related to DHCP Relay statistics for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations." AUGMENTS { vRtrIfEntry } ::= { vRtrIfDHCPRelayStatsTable 1 } VRtrIfDHCPRelayStatsEntry ::= SEQUENCE { vRtrIfDHCPRelayRxPkts Counter32, vRtrIfDHCPRelayTxPkts Counter32, vRtrIfDHCPRelayRxMalformedPkts Counter32, vRtrIfDHCPRelayRxUntrustedPkts Counter32, vRtrIfDHCPRelayClientPktsDiscarded Counter32, vRtrIfDHCPRelayClientPktsRelayed Counter32, vRtrIfDHCPRelayServerPktsDiscarded Counter32, vRtrIfDHCPRelayServerPktsRelayed Counter32, vRtrIfDHCPRelayAuthPktsDiscarded Counter32, vRtrIfDHCPRelayAuthPktsSuccess Counter32, vRtrIfDHCPRelayClientPktsSnooped Counter32, vRtrIfDHCPRelayServerPktsSnooped Counter32, vRtrIfDHCPRelayClientPktsProxRad Counter32, vRtrIfDHCPRelayClientPktsProxLS Counter32, vRtrIfDHCPRelayPktsGenRelease Counter32, vRtrIfDHCPRelayPktsGenForceRenew Counter32 } vRtrIfDHCPRelayRxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrIfDHCPRelayRxPkts indicates the total number of packets received by the DHCP relay agent." ::= { vRtrIfDHCPRelayStatsEntry 1 } vRtrIfDHCPRelayTxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrIfDHCPRelayTxPkts indicates the total number of packets transmitted by the DHCP relay agent." ::= { vRtrIfDHCPRelayStatsEntry 2 } vRtrIfDHCPRelayRxMalformedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrIfDHCPRelayRxMalformedPkts indicates the total number of malformed packets received by the DHCP relay agent." ::= { vRtrIfDHCPRelayStatsEntry 3 } vRtrIfDHCPRelayRxUntrustedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrIfDHCPRelayRxUntrustedPkts indicates the total number of untrusted packets received by the DHCP relay agent." ::= { vRtrIfDHCPRelayStatsEntry 4 } vRtrIfDHCPRelayClientPktsDiscarded OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrIfDHCPRelayClientPktsDiscarded indicates the total number of client packets dicarded by the DHCP relay agent." ::= { vRtrIfDHCPRelayStatsEntry 5 } vRtrIfDHCPRelayClientPktsRelayed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrIfDHCPRelayClientPktsRelayed indicates the total number of client packets relayed by the DHCP relay agent." ::= { vRtrIfDHCPRelayStatsEntry 6 } vRtrIfDHCPRelayServerPktsDiscarded OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrIfDHCPRelayServerPktsDiscarded indicates the total number of server packets discarded by the DHCP relay agent." ::= { vRtrIfDHCPRelayStatsEntry 7 } vRtrIfDHCPRelayServerPktsRelayed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrIfDHCPRelayServerPktsRelayed indicates the total number of server packets relayed by the DHCP relay agent." ::= { vRtrIfDHCPRelayStatsEntry 8 } vRtrIfDHCPRelayAuthPktsDiscarded OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrIfDHCPRelayAuthPktsDiscarded indicates the total number of packets discarded because authentication was not successful." ::= { vRtrIfDHCPRelayStatsEntry 9 } vRtrIfDHCPRelayAuthPktsSuccess OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrIfDHCPRelayAuthPktsSuccess indicates the total number of packets for which authentication was successful." ::= { vRtrIfDHCPRelayStatsEntry 10 } vRtrIfDHCPRelayClientPktsSnooped OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrIfDHCPRelayClientPktsSnooped indicates the total number of client packets snooped by the DHCP relay agent." ::= { vRtrIfDHCPRelayStatsEntry 11 } vRtrIfDHCPRelayServerPktsSnooped OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrIfDHCPRelayServerPktsSnooped indicates the total number of server packets snooped by the DHCP relay agent." ::= { vRtrIfDHCPRelayStatsEntry 12 } vRtrIfDHCPRelayClientPktsProxRad OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrIfDHCPRelayClientPktsProxRad indicates the total number of client packets proxied by the DHCP relay agent based on data received from a RADIUS server." ::= { vRtrIfDHCPRelayStatsEntry 13 } vRtrIfDHCPRelayClientPktsProxLS OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrIfDHCPRelayClientPktsProxLS indicates the total number of client packets proxied by the DHCP relay agent based on a lease state. The lease itself can have been obtained from a DHCP or RADIUS server. This is the so called lease split functionality." ::= { vRtrIfDHCPRelayStatsEntry 14 } vRtrIfDHCPRelayPktsGenRelease OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrIfDHCPRelayPktsGenRelease indicates the total number of DHCP RELEASE messages spoofed by the DHCP relay agent to the DHCP server." ::= { vRtrIfDHCPRelayStatsEntry 15 } vRtrIfDHCPRelayPktsGenForceRenew OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrIfDHCPRelayPktsGenForceRenew indicates the total number of DHCP FORCERENEW messages spoofed by the DHCP relay agent to the DHCP clients." ::= { vRtrIfDHCPRelayStatsEntry 16 } -- -- Virtual Router Interface DHCP Lease State Table -- vRtrIfDHCPLeaseStateTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIfDHCPLeaseStateEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "vRtrIfDHCPLeaseStateTable contains DHCP lease state info for a virtual router interface in the system. The content of this table is moved to the ALCATEL-IND1-TIMETRA-SERV-MIB::svcDhcpLeaseStateTable." ::= { tmnxVRtrObjs 22 } vRtrIfDHCPLeaseStateEntry OBJECT-TYPE SYNTAX VRtrIfDHCPLeaseStateEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "DHCP lease state information for a virtual router interface." INDEX { vRtrID, vRtrIfIndex, vRtrIfDHCPLseStateCiAddr } ::= { vRtrIfDHCPLeaseStateTable 1 } VRtrIfDHCPLeaseStateEntry ::= SEQUENCE { vRtrIfDHCPLseStateCiAddr IpAddress, vRtrIfDHCPLseStateChAddr MacAddress, vRtrIfDHCPLseStateRemainLseTime Unsigned32, vRtrIfDHCPLseStateOption82 OCTET STRING, vRtrIfDHCPLseStatePersistKey Unsigned32 } vRtrIfDHCPLseStateCiAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of the object vRtrIfDHCPLseStateCiAddr indicates the IP address of the DHCP lease state." ::= { vRtrIfDHCPLeaseStateEntry 1 } vRtrIfDHCPLseStateChAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object vRtrIfDHCPLseStateChAddr indicates the MAC address of the DHCP lease state." ::= { vRtrIfDHCPLeaseStateEntry 2 } vRtrIfDHCPLseStateRemainLseTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object vRtrIfDHCPLseStateRemainLseTime indicates the remaining lease time of the IP address of the DHCP lease state." ::= { vRtrIfDHCPLeaseStateEntry 3 } vRtrIfDHCPLseStateOption82 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS obsolete DESCRIPTION "vRtrIfDHCPLseStateOption82 indicates the content of the Option82 for this DHCP lease state." ::= { vRtrIfDHCPLeaseStateEntry 4 } vRtrIfDHCPLseStatePersistKey OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object vRtrIfDHCPLseStatePersistKey indicates a key value that can be used to track this lease state in the persistence file." ::= { vRtrIfDHCPLeaseStateEntry 5 } -- -- Alcatel 7x50 SR series Virtual Router Interface IPv6 DHCP Relay Table -- -- Augmentation of the vRtrIfTable. -- Use of AUGMENTS clause implies a one-to-one dependent relationship -- between the base table, vRtrIfTable, and the augmenting table, -- vRtrIfDHCP6RelayTable. This in effect extends the vRtrIfTable with -- additional columns. Creation (or deletion) of a row in the -- vRtrIfTable results in the same fate for the row in the -- vRtrIfDHCP6RelayTable. -- vRtrIfDHCP6TableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6TableLastChanged indicates the time of the last change to any row of vRtrIfDHCP6Table" ::= { tmnxVRtrObjs 35 } vRtrIfDHCP6Table OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIfDHCP6Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrIfDHCP6Table is used to configure the interface parameters for the DHCP6 Relay agent." ::= { tmnxVRtrObjs 36 } vRtrIfDHCP6Entry OBJECT-TYPE SYNTAX VRtrIfDHCP6Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents information related to DHCP6 Relay for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations." AUGMENTS { vRtrIfEntry } ::= { vRtrIfDHCP6Table 1 } VRtrIfDHCP6Entry ::= SEQUENCE { vRtrIfDHCP6LastChanged TimeStamp, vRtrIfDHCP6AdminState TmnxAdminState, vRtrIfDHCP6OperState INTEGER, vRtrIfDHCP6Description TItemDescription, vRtrIfDHCP6RelayServer1 InetAddressIPv6z, vRtrIfDHCP6RelayServer2 InetAddressIPv6z, vRtrIfDHCP6RelayServer3 InetAddressIPv6z, vRtrIfDHCP6RelayServer4 InetAddressIPv6z, vRtrIfDHCP6RelayServer5 InetAddressIPv6z, vRtrIfDHCP6RelayServer6 InetAddressIPv6z, vRtrIfDHCP6RelayServer7 InetAddressIPv6z, vRtrIfDHCP6RelayServer8 InetAddressIPv6z, vRtrIfDHCP6RelayItfIdOption INTEGER, vRtrIfDHCP6LeasePopulate Unsigned32, vRtrIfDHCP6CurrLeasePopulate Unsigned32, vRtrIfDHCP6SourceAddress InetAddressIPv6, vRtrIfDHCP6EnableNgbrResolution TruthValue, vRtrIfDHCP6RemoteIdOption TruthValue, vRtrIfDHCP6PfxdAdminState INTEGER, vRtrIfDHCP6ServerMaxLeaseStates Unsigned32, vRtrIfDHCP6CurrServerLeaseStates Unsigned32, vRtrIfDHCP6ItfIdString DisplayString } vRtrIfDHCP6LastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6LastChanged indicates the time of the last change to this row of VRtrIfDHCP6Entry." ::= { vRtrIfDHCP6Entry 1 } vRtrIfDHCP6AdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6AdminState specifies the desired administrative status of the DHCP6 relay agent on this interface. The value can only be set to inService if the value of vRtrIfType is serviceIesGroup. The value noop(3) is never allowed." DEFVAL { outOfService } ::= { vRtrIfDHCP6Entry 2 } vRtrIfDHCP6OperState OBJECT-TYPE SYNTAX INTEGER { up (1), down (2), noIPv6Pfx (3), noServerConfigured (4), noValidSourceAddr (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6OperState indicates the current operational state of the DHCP6 relay agent on this interface. Following value are possible: up (1) - the DHCP6 relay agent is running. down (2), - the DHCP6 relay agent is administratively disabled. noIPv6Pfx (3), - the DHCP6 relay agent cannot be operational as no ipv6 prefix is assigned to this link. noServerConfigured(4) - the DHCP6 relay agent cannot be operational as no DHCP6 servers are configured. noValidSourceAddr(5) - the DHCP6 relay agent cannot be operational because a source address has been configured and the address is not local to this node." ::= { vRtrIfDHCP6Entry 3 } vRtrIfDHCP6Description OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6Description specifies a user provided description string for DHCP6 relay agent on this virtual router interface. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length." DEFVAL { ''H } -- the empty string ::= { vRtrIfDHCP6Entry 4 } vRtrIfDHCP6RelayServer1 OBJECT-TYPE SYNTAX InetAddressIPv6z MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6RelayServer1 specifies the first DHCP6 server where the DHCP6 requests will be forwarded to." DEFVAL { '0000000000000000000000000000000000000000'H } ::= { vRtrIfDHCP6Entry 5 } vRtrIfDHCP6RelayServer2 OBJECT-TYPE SYNTAX InetAddressIPv6z MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6RelayServer2 specifies the 2nd DHCP6 server where the DHCP6 requests will be forwarded to." DEFVAL { '0000000000000000000000000000000000000000'H } ::= { vRtrIfDHCP6Entry 6 } vRtrIfDHCP6RelayServer3 OBJECT-TYPE SYNTAX InetAddressIPv6z MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6RelayServer3 specifies the 3rd DHCP6 server where the DHCP6 requests will be forwarded to." DEFVAL { '0000000000000000000000000000000000000000'H } ::= { vRtrIfDHCP6Entry 7 } vRtrIfDHCP6RelayServer4 OBJECT-TYPE SYNTAX InetAddressIPv6z MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6RelayServer4 specifies the 4rd DHCP6 server where the DHCP6 requests will be forwarded to." DEFVAL { '0000000000000000000000000000000000000000'H } ::= { vRtrIfDHCP6Entry 8 } vRtrIfDHCP6RelayServer5 OBJECT-TYPE SYNTAX InetAddressIPv6z MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6RelayServer5 specifies the 5th DHCP6 server where the DHCP6 requests will be forwarded to." DEFVAL { '0000000000000000000000000000000000000000'H } ::= { vRtrIfDHCP6Entry 9 } vRtrIfDHCP6RelayServer6 OBJECT-TYPE SYNTAX InetAddressIPv6z MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6RelayServer6 specifies the 6th DHCP6 server where the DHCP6 requests will be forwarded to." DEFVAL { '0000000000000000000000000000000000000000'H } ::= { vRtrIfDHCP6Entry 10 } vRtrIfDHCP6RelayServer7 OBJECT-TYPE SYNTAX InetAddressIPv6z MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6RelayServer7 specifies the 7th DHCP6 server where the DHCP6 requests will be forwarded to." DEFVAL { '0000000000000000000000000000000000000000'H } ::= { vRtrIfDHCP6Entry 11 } vRtrIfDHCP6RelayServer8 OBJECT-TYPE SYNTAX InetAddressIPv6z MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6RelayServer8 specifies the 8th DHCP6 server where the DHCP6 requests will be forwarded to." DEFVAL { '0000000000000000000000000000000000000000'H } ::= { vRtrIfDHCP6Entry 12 } vRtrIfDHCP6RelayItfIdOption OBJECT-TYPE SYNTAX INTEGER { none (0), ifIndex (1), asciiTuple (2), sapId (3), string (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6RelayItfIdOption specifies whether or not the interface-id option is added by the DHCP6 relay agent, and, if it is present, what information goes in it. If the value of this object is set to 'none', the option is not added by the relay agent. In all other cases the option is added to the relay message. The content of the option is defined as follows: - 'ifIndex' - the value of the interface index is used. - 'asciiTuple' - the ASCII-encoded concatenated tuple consisting of the - access-node-identifier - service-id - interface-name - SAP-id (only if the value of vRtrIfType is 'serviceIesGroup') - 'sapId' - the ASCII-encoded SAP-id is used. - 'string' - the value of the object vRtrIfDHCP6ItfIdString is used. " DEFVAL { none } ::= { vRtrIfDHCP6Entry 13 } vRtrIfDHCP6LeasePopulate OBJECT-TYPE SYNTAX Unsigned32 (0..8000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6LeasePopulate specifies the maximum number of lease states allocated by the DHCP6 relay function, allowed on this interface." DEFVAL { 0 } ::= { vRtrIfDHCP6Entry 14 } vRtrIfDHCP6CurrLeasePopulate OBJECT-TYPE SYNTAX Unsigned32 (0..8000) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6CurrLeasePopulate indicates the number of lease states currently allocated on this interface by the DHCP6 relay function." ::= { vRtrIfDHCP6Entry 15 } vRtrIfDHCP6SourceAddress OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6SourceAddress specifies the ipv6 address that will be used by the DHCP6 relay agent as source IP address in all messages sent to the DHCP6 servers. If set to ::, the system will use the IPv6 address assigned on the link on which the relay message is sent out, if such an address is defined. As a last resort the system Ipv6 address is taken." DEFVAL { '00000000000000000000000000000000'H } ::= { vRtrIfDHCP6Entry 16 } vRtrIfDHCP6EnableNgbrResolution OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6EnableNgbrResolution specifies whether or not neighbor resolution via DHCP6 Relay must be enabled on this interface. This feature is similar to the arp-populate feature in ipv4." DEFVAL { false } ::= { vRtrIfDHCP6Entry 17 } vRtrIfDHCP6RemoteIdOption OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6RemoteIdOption specifies whether or not the remote Id option is sent to the DHCP6 server. The client DUID is used as remoteId." DEFVAL { false } ::= { vRtrIfDHCP6Entry 18 } vRtrIfDHCP6PfxdAdminState OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6PfxdAdminState specifies the administrative state of the row. If set to enabled, this IPv6 prefix will be delegated by the system." DEFVAL { disabled } ::= { vRtrIfDHCP6Entry 19 } vRtrIfDHCP6ServerMaxLeaseStates OBJECT-TYPE SYNTAX Unsigned32 (0..8000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6ServerMaxLeaseStates specifies the maximum number of lease states installed by the DHCP6 server function allowed on this interface." DEFVAL { 8000 } ::= { vRtrIfDHCP6Entry 20 } vRtrIfDHCP6CurrServerLeaseStates OBJECT-TYPE SYNTAX Unsigned32 (0..8000) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6CurrServerLeaseStates indicates the number of lease states currently allocated on this interface by the DHCP6 server function." ::= { vRtrIfDHCP6Entry 21 } vRtrIfDHCP6ItfIdString OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6ItfIdString specifies the string that will be put in the interface-id option added by the relay agent. This value is only meaningful if the object vRtrIfDHCP6RelayItfIdOption is set to string(4)." ::= { vRtrIfDHCP6Entry 22 } -- -- Alcatel 7x50 SR series Virtual Router Interface Name to vRtrIfIndex Mapping -- Table -- vRtrIfNameTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIfNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a read-only table, each row of which represents a one to one equivalence between a router interface name (vRtrIfName) and its corresponding index in the vRtrIfTable (vRtrIfIndex)." ::= { tmnxVRtrObjs 5} vRtrIfNameEntry OBJECT-TYPE SYNTAX VRtrIfNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the vRtrIfNameTable corresponds to a row in the vRtrIfTable. When an entry is created or deleted in the vRtrIfTable, a corresponding entry is created or deleted in this table." INDEX { vRtrID, IMPLIED vRtrIfName } ::= { vRtrIfNameTable 1 } VRtrIfNameEntry ::= SEQUENCE { vRtrIfNameIndex InterfaceIndex } vRtrIfNameIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfNameIndex gives the value of vRtrIfIndex for a row in the vRtrIfTable. This row corresponds to the virtual router interface which has interface name as vRtrIfName. Every vRtrIfName is unique within a specific instance of vRtrID." ::= { vRtrIfNameEntry 1 } -- -- Virtual Router IP Address Table -- vRtrIpAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIpAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrIpAddrTable has an entry for each IP address configured for a virtual router in the system. An interface on the virtual router may have more than one IP address assigned to it." ::= { tmnxVRtrObjs 6 } vRtrIpAddrEntry OBJECT-TYPE SYNTAX VRtrIpAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents an IP address assigned a virtual router interface. Entries can be created and deleted via SNMP SET operations. Setting RowStatus to 'active' requires a values for all column variables to have been assigned." INDEX { vRtrID, vRtrIfIndex, vRiaIndex } ::= { vRtrIpAddrTable 1 } VRtrIpAddrEntry ::= SEQUENCE { vRiaIndex INTEGER, vRiaRowStatus RowStatus, vRiaIpAddress IpAddress, vRiaNetMask IpAddress, vRiaBcastAddrFormat INTEGER, vRiaReasmMaxSize INTEGER, vRiaIgpInhibit TruthValue, vRiaInetAddressType InetAddressType, vRiaInetAddress InetAddress, vRiaInetPrefixLen InetAddressPrefixLength, vRiaInetAddrState TmnxInetAddrState, vRiaInetEui64 TruthValue, vRiaInetOperAddress InetAddress, vRiaInetGwAddressType InetAddressType, vRiaInetGwAddress InetAddress, vRiaInetRemoteIpType InetAddressType, vRiaInetRemoteIp InetAddress } vRiaIndex OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique value which identifies this IP address entry for this interface of this virtual router in the Tmnx system. Those row entries with vRiaIndex = 1 represent the primary IP address for the interface identified by the vRtrID and vRtrIfIndex pair. Row entries with other values for vRiaIndex are secondary IP addresses. There must always be a primary IP address assigned an interface. This implies that if the primary address row is deleted, the secondary rows are also deleted." ::= { vRtrIpAddrEntry 1 } vRiaRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status used for creation, deletion, or control of vRtrIpAddrTable entries. All the other row variables must have been assigned values before the row can be place into the 'active' state." ::= { vRtrIpAddrEntry 2 } vRiaIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address assigned to a router's interface." ::= { vRtrIpAddrEntry 3 } vRiaNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the host bits set to 0." DEFVAL { 'FFFFFF00'H } -- 255.255.255.0 ::= { vRtrIpAddrEntry 4 } vRiaBcastAddrFormat OBJECT-TYPE SYNTAX INTEGER { allOnes (1), hostOnes (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When vRiaBcastAddrFormat is set to 'allOnes', the 255.255.255.255 address is used for local broadcast. When vRiaBcastAddrFormat is set to 'hostOnes', the -1 address is used for the local broadcast. For example for subnet 10.10.16.0/20 the -1 address is 10.10.31.255." DEFVAL { hostOnes } ::= { vRtrIpAddrEntry 5 } vRiaReasmMaxSize OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The size of the largest IP datagram which this entry can reassemble from incoming IP fragmented datagrams received on this interface." ::= { vRtrIpAddrEntry 6 } vRiaIgpInhibit OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This variable should only be associated with secondary ip addresses, i.e., when the value of vRiaIndex is other than 1. When vRiaIgpInhibit has a value of 'true', it indicates that the given secondary IP address should not be recognized as a local interface by the running IGP. For OSPF and IS-IS, this means that the given secondary IP addresses will not be injected as passive interfaces and will not be advertised as internal IP interfaces into the IGP's link state database. For RIP this means these secondary IP interfaces will not source RIP updates." ::= { vRtrIpAddrEntry 7 } vRiaInetAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "vRiaInetAddressType specifies the type of the vRiaInetAddress address assigned to a router's interface." ::= { vRtrIpAddrEntry 8 } vRiaInetAddress OBJECT-TYPE SYNTAX InetAddress (SIZE(0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The type of this address is determined by the value of the vRiaInetAddressType object. vRiaInetAddress indicates the IPv4/IPv6 address assigned to a router's interface." ::= { vRtrIpAddrEntry 9 } vRiaInetPrefixLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRiaInetPrefixLen specifies the length of the IP netmask for this interface address." ::= { vRtrIpAddrEntry 10 } vRiaInetAddrState OBJECT-TYPE SYNTAX TmnxInetAddrState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRiaInetAddrState indicates the address state of the IPv6 address of the interface." ::= { vRtrIpAddrEntry 11 } vRiaInetEui64 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRiaInetEui64 specifies whether the vRiaInetOperAddress is an eui64 address. This object can only be set at creation time. When vRiaInetEui64 is 'true', then the vRiaInetOperAddress is derived from the vRiaInetAddress and the physical address of the interface this address is attached to. vRiaInetAddress has to have all zeros the least significant 8 bytes. Also, vRiaInetPrefixLen cannot be longer than 64. When vRiaInetEui64 is 'false', then the vRiaInetOperAddress is a copy of vRiaInetAddress. The value is always 'false' when vRiaInetAddressType is not 'ipv6'." DEFVAL { false } ::= { vRtrIpAddrEntry 12 } vRiaInetOperAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRiaInetOperAddress indicates the operational address of this entry. The type of this address is determined by the value of the vRiaInetAddressType object." ::= { vRtrIpAddrEntry 13 } vRiaInetGwAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRiaInetGwAddressType specifies the address type of vRiaInetGwAddress." DEFVAL { unknown } ::= { vRtrIpAddrEntry 14 } vRiaInetGwAddress OBJECT-TYPE SYNTAX InetAddress (SIZE(0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRiaInetGwAddress specifies the gateway address for the subnet specified by vRiaInetAddress and vRiaInetPrefixLen. The address type is defined by vRiaInetGwAddressType. This field is only valid when the address is configured on a subscriber interface." DEFVAL { ''H } ::= { vRtrIpAddrEntry 15 } vRiaInetRemoteIpType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRiaInetRemoteIpType specifies the address type of vRiaInetRemoteIp." DEFVAL { unknown } ::= { vRtrIpAddrEntry 16 } vRiaInetRemoteIp OBJECT-TYPE SYNTAX InetAddress (SIZE(0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRiaInetRemoteIp specifies the IP address of the remote redundant interface. This field is only valid when the address is configured on a redundant interface." DEFVAL { ''H } ::= { vRtrIpAddrEntry 17 } -- -- Augmentation of the IP-FORWARD-MIB ipCidrRouteTable. -- Use of AUGMENTS clause implies a one-to-one dependent relationship between -- the base table, ipCidrRouteTable, and the augmenting table, -- vRtrIpCidrRouteTable. This in effect extends the ipCidrRouteTable with -- additional columns. Creation (or deletion) of a row in the -- ipCidrRouteTable results in the same fate for the row in the -- vRtrIpCidrRouteTable. -- vRtrIpCidrRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIpCidrRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrIpCidrRouteTable provides an extension of the ipCidrRouteTable in the IP-FORWARD-MIB." ::= { tmnxVRtrObjs 7 } vRtrIpCidrRouteEntry OBJECT-TYPE SYNTAX VRtrIpCidrRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the vRtrIpCidrRouteTable represents additional columns for attributes specific to the Alcatel 7x50 SR series implementation for the IP route table." AUGMENTS { ipCidrRouteEntry } ::= { vRtrIpCidrRouteTable 1 } VRtrIpCidrRouteEntry ::= SEQUENCE { vRtrIpCidrRouteLastEnabledTime TimeStamp, vRtrIpCidrRoutePreference Unsigned32, vRtrIpCidrRouteMetric Unsigned32 } vRtrIpCidrRouteLastEnabledTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The vRtrIpCidrRouteLastEnabledTime variable contains the sysUpTime value when ipCidrRouteStatus was last set to active (1) to allow IP forwarding on this route entry." ::= { vRtrIpCidrRouteEntry 1 } vRtrIpCidrRoutePreference OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "When ipCidrRouteProto has a value of 'netmgmt' to indicate that this entry is a static route, the value of vRtrIpCidrRoutePreference determines the priority of this static route versus the routes from different sources such as BGP or OSPF etc. Different protocols should not be configured with the same preference, if this occurs the tiebreaker is determined per the default preference value as defined in the table below. If multiple routes are learned with an identical preference using the same protocol, the lowest cost is used. If multiple routes are learned with an identical preference using the same protocol and the costs (metrics) are equal, then the decision as to what route to use is determined by the configuration of the ecmp command. Default preferences: Route Type Preference Configurable ---------- ---------- ------------ Direct attached 0 no Static-route 5 yes MPLS (post FCS) 7 OSPF Internal routes 10 no OSPF External 150 yes BGP 170 yes " DEFVAL { 5 } ::= { vRtrIpCidrRouteEntry 2 } vRtrIpCidrRouteMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value." ::= { vRtrIpCidrRouteEntry 3 } -- Virtual router Static Route Table -- The Virtual router Static Route Table maintains both active and inactive -- static routes that have been configured by the network manager. -- It adds knowledge of the autonomous system of the next hop, multiple -- next hops, and policy routing, and Classless Inter-Domain Routing. -- Active entries are also represented in the IP-FORWARD-MIB ipCidrTable. vRtrStaticRouteNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of current vRtrStaticRouteTable entries that are 'active'." ::= { tmnxVRtrObjs 8 } vRtrStaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entity's Static Routing table." ::= { tmnxVRtrObjs 9 } vRtrStaticRouteEntry OBJECT-TYPE SYNTAX VRtrStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A particular route to a particular destination, through a particular next hop." INDEX { vRtrID, vRtrStaticRouteDest, vRtrStaticRouteMask, vRtrStaticRouteIndex } ::= { vRtrStaticRouteTable 1 } VRtrStaticRouteEntry ::= SEQUENCE { vRtrStaticRouteDest IpAddress, vRtrStaticRouteMask IpAddress, vRtrStaticRouteIndex INTEGER, vRtrStaticRouteRowStatus RowStatus, vRtrStaticRouteLastEnabledTime TimeStamp, vRtrStaticRouteStatus INTEGER, vRtrStaticRouteStaticType INTEGER, vRtrStaticRoutePreference Unsigned32, vRtrStaticRouteMetric Unsigned32, vRtrStaticRouteEgressIfIndex InterfaceIndexOrZero, vRtrStaticRouteNextHop IpAddress, vRtrStaticRouteNextHopUnnumberedIf DisplayString, vRtrStaticRouteAdminState TmnxAdminState, vRtrStaticRouteIgpShortcut BITS, vRtrStaticRouteDisallowIgp TruthValue, vRtrStaticRouteTag Unsigned32 } vRtrStaticRouteDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrStaticRouteMask object is not equal to x." ::= { vRtrStaticRouteEntry 1 } vRtrStaticRouteMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the vRtrStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the vRtrStaticRouteMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrStaticRouteDest object is not equal to vRtrStaticRouteDest." ::= { vRtrStaticRouteEntry 2 } vRtrStaticRouteIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The quaternary index for the vRtrStaticRouteTable." ::= { vRtrStaticRouteEntry 3 } vRtrStaticRouteRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable, used according to row installation and removal conventions." ::= { vRtrStaticRouteEntry 4 } vRtrStaticRouteLastEnabledTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The vRtrStaticRouteLastEnabledTime variable contains the sysUpTime value when vRtrStaticRouteStatus was last set to active (1) to allow IP forwarding on this static route entry." ::= { vRtrStaticRouteEntry 5 } vRtrStaticRouteStatus OBJECT-TYPE SYNTAX INTEGER { active (1), inactive (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrStaticRouteStatus indicates whether or not this route entry is active in the system. When an interface transitions to the down state, any associated route entries are marked as 'inactive' and are usually not displayed in a standard route table listing. When the interface transitions to the up state, the agent marks the associated routes as 'active'" ::= { vRtrStaticRouteEntry 6 } vRtrStaticRouteStaticType OBJECT-TYPE SYNTAX INTEGER { unknown (0), nextHop (1), indirect (2), blackHole (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrStaticRouteStaticType indicates the type of static route represented by this row entry." DEFVAL { unknown } ::= { vRtrStaticRouteEntry 7 } vRtrStaticRoutePreference OBJECT-TYPE SYNTAX Unsigned32 (1..256) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrStaticRoutePreference determines the priority of this static route versus the routes from different sources such as BGP or OSPF etc. Different protocols should not be configured with the same preference, if this occurs the tiebreaker is determined per the default preference value as defined in the table below. If multiple routes are learned with an identical preference using the same protocol, the lowest cost is used. If multiple routes are learned with an identical preference using the same protocol and the costs (metrics) are equal, then the decision as to what route to use is determined by the configuration of the ecmp command. Default preferences. Route Type Preference Configurable ---------- ---------- ------------ Direct attached 0 no Static-route 5 yes MPLS (post FCS) 7 OSPF Internal routes 10 no OSPF External 150 yes BGP 170 yes " DEFVAL { 5 } ::= { vRtrStaticRouteEntry 8 } vRtrStaticRouteMetric OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "When ipCidrRouteProto has a value of 'netmgmt' to indicate that this entry is a static route, the value of vRtrStaticRouteMetric associates a metric value with the route. This value is used when importing this static route into other protocols such as OSPF. When the metric is configured as zero then the metric configured in OSPF, default-import-metric, applies. This value is also used to determine which static route to install in the forwarding table: If there are multiple static routes with the same preference but unequal metric then the lower cost (metric) route will be installed. If there are multiple static routes with equal preference and metrics then ecmp rules apply. If there are multiple routes with unequal preference then the lower preference route will be installed. " DEFVAL { 1 } ::= { vRtrStaticRouteEntry 9 } vRtrStaticRouteEgressIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The outgoing ifIndex for this route as computed by the static-route module. This variable will have a value of 0 if vRtrStaticRouteStatus is 'inactive' or if this static route is configured as a black hole." ::= { vRtrStaticRouteEntry 11 } vRtrStaticRouteNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "In case of remote routes, the address of the next system en route. This member is complemented by vRtrStaticRouteNextHopUnnumberedIf. Atmost only one of them can be non-null. If vRtrStaticRouteNextHop is '0.0.0.0' and vRtrStaticRouteNextHopUnnumberedIf is a null string then this static route is configured as a black hole." ::= { vRtrStaticRouteEntry 12 } vRtrStaticRouteNextHopUnnumberedIf OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The name of the unnumbered Interface which will be the nexthop for this route. This member is complemented by vRtrStaticRouteNextHop. Atmost only one of them can be non-null. If vRtrStaticRouteNextHop is '0.0.0.0' and vRtrStaticRouteNextHopUnnumberedIf is a null string then this static route is configured as a black hole." ::= { vRtrStaticRouteEntry 13 } vRtrStaticRouteAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The desired administrative state for this virtual router static route" DEFVAL { inService } ::= { vRtrStaticRouteEntry 14 } vRtrStaticRouteIgpShortcut OBJECT-TYPE SYNTAX BITS { te(0), ldp(1), ip(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrStaticRouteIgpShortcut is valid only for indirect static routes (i.e. vRtrStaticRouteStaticType is 'indirect'). The bits of vRtrStaticRouteIgpShortcut identify Layer 2 tunneling mechanisms used for IGP shortcuts. If a bit is set, IGP shortcuts associated with that tunneling mechanism will be used to resolve next-hop for the static-route. If no bits are set, IGP shortcuts will not be used to resolve next-hop for the static routes. The tunneling mechanisms represented by each bit are: te(0) - RSVP Traffic Engineering ldp(1) - LDP /32 Route Forwarding Equivalence Class (FEC) ip(2) - IP (IP-in-IP or GRE) Evaluation of tunnel preference is based on the following order, in descending priority: 1. Traffic Engineered Shortcut (RSVP-TE) 2. LDP /32 Route FEC Shortcut 3. IP Shortcut (IP-in-IP or GRE) 4. Actual IGP Next-Hop." DEFVAL { { } } ::= { vRtrStaticRouteEntry 15 } vRtrStaticRouteDisallowIgp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrStaticRouteDisallowIgp is valid only for indirect static routes (i.e. vRtrStaticRouteStaticType is 'indirect'). If the value of vRtrStaticRouteDisallowIgp is set to 'true', and if none of the defined tunneling mechanisms (RSVP-TE, LDP or IP) qualify as a next-hop, the normal IGP next-hop to the indirect next-hop address will not be used. If the value is set to 'false', IGP next-hop to the indirect next-hop address can be used as the next-hop of the last resort." DEFVAL { false } ::= { vRtrStaticRouteEntry 16 } vRtrStaticRouteTag OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrStaticRouteTag is used to add a 32-bit integer tag to the static route. This tag could then be used in route policies to control distribution of the route into other protocols. A value of 0 indicates that the tag has not been set." DEFVAL { 0 } ::= { vRtrStaticRouteEntry 17 } -- -- Virtual Router Service Interface IP Address Range table -- vRtrSvcIpRangeTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrSvcIpRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrSvcIpRangeTable has an entry for each IP address range configured for a virtual interface in a virtual router in the system. An interface on the virtual router may have more than one Service IP address ranges assigned to it." ::= { tmnxVRtrObjs 10 } vRtrSvcIpRangeEntry OBJECT-TYPE SYNTAX VRtrSvcIpRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents an IP address range assigned a virtual router service interface. Entries can be created and deleted via SNMP SET operations. Setting RowStatus to 'active' requires values for all column variables to have been assigned." INDEX { vRtrID, vRtrSvcIpRangeAddress, vRtrSvcIpRangeMask } ::= { vRtrSvcIpRangeTable 1 } VRtrSvcIpRangeEntry ::= SEQUENCE { vRtrSvcIpRangeAddress IpAddress, vRtrSvcIpRangeMask Unsigned32, vRtrSvcIpRangeRowStatus RowStatus, vRtrSvcIpRangeExclusive TruthValue } vRtrSvcIpRangeAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address prefix range assigned to a router's service interface." ::= { vRtrSvcIpRangeEntry 1 } vRtrSvcIpRangeMask OBJECT-TYPE SYNTAX Unsigned32 (0..32) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The subnet mask associated with the Service IP address of this entry. The value of the mask is an 32-bit integer with all the network bits set to 1 and all the host bits set to 0." ::= { vRtrSvcIpRangeEntry 2 } vRtrSvcIpRangeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status used for creation, deletion, or control of vRtrSvcIpRangeTable entries." ::= { vRtrSvcIpRangeEntry 3 } vRtrSvcIpRangeExclusive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When vRtrSvcIpRangeExclusive has a value of 'true', this set of addresses is reserved for services only and cannot be assigned to network ports. When it has a value of 'false', it could be used for services as well as network ports." DEFVAL { false } ::= { vRtrSvcIpRangeEntry 4 } -- -- Augmentation of the IP-MIB ipNetToMediaTable. -- Use of AUGMENTS clause implies a one-to-one dependent relationship between -- the base table, ipNetToMediaTable, and the augmenting table, -- vRtrIpNetToMediaTable. This in effect extends the ipNetToMediaTable with -- additional columns. Creation (or deletion) of a row in the -- ipNetToMediaTable results in the same fate for the row in the -- vRtrIpNetToMediaTable. -- vRtrIpNetToMediaTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIpNetToMediaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrIpNetToMediaTable provides an extension of the ipNetToMediaTable in the IP-MIB." ::= { tmnxVRtrObjs 11 } vRtrIpNetToMediaEntry OBJECT-TYPE SYNTAX VRtrIpNetToMediaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the vRtrIpNetToMediaTable represents additional columns for attributes specific to the Alcatel 7x50 SR series implementation for the vRtrIpNetToMediaTable." AUGMENTS { ipNetToMediaEntry } ::= { vRtrIpNetToMediaTable 1 } VRtrIpNetToMediaEntry ::= SEQUENCE { vRtrIpNetToMediaTimer Unsigned32, vRtrIpNetToMediaOperState TmnxOperState } vRtrIpNetToMediaTimer OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIpNetToMediaTimer determines how much longer an ARP entry associated with an vRtrIpNetToMediaTable entry remains in the ARP cache. It is initially set to vRtrIfArpTimeout. When vRtrIpNetToMediaTimer has a value of zero, '0', the entry is cleared from the cache." ::= { vRtrIpNetToMediaEntry 1 } vRtrIpNetToMediaOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIpNetToMediaOperState specifies if the ARP entry is being used actively in the ARP Table. When ipNetToMediaType has a value 'dynamic', vRtrIpNetToMediaOperState will never have a value of 'outOfService'." ::= { vRtrIpNetToMediaEntry 2 } -- -- VRtr instance aggregation objects -- vRtrInstanceAggregationTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of the last change to the vRtrInstanceAggregationTable either from adding a row or removing a row." ::= { tmnxVRtrObjs 12 } vRtrInstanceAggregationTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrInstanceAggregationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrInstanceAggregationTable is the list of configured VRtr aggregations and their operational status information. Specifies the route aggregates that should be generated into the virtual router if at least one contributing route (more specific) is learned. A route could match multiple aggregate statements. For instance, with the following entries: aggregate 10.0.0.0/8 aggregate 10.1.0.0/16 If the route 10.1.1.0/24 is learned, both aggregates would be generated." ::= { tmnxVRtrObjs 13 } vRtrInstanceAggregationEntry OBJECT-TYPE SYNTAX VRtrInstanceAggregationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the vRtrInstanceAggregationTable. Entries are created by user. Entries are destroyed by user." INDEX { vRtrID, vRtrAggregationIpPrefix, vRtrAggregationIpPrefixMask } ::= { vRtrInstanceAggregationTable 1 } VRtrInstanceAggregationEntry ::= SEQUENCE { vRtrAggregationIpPrefix IpAddress, vRtrAggregationIpPrefixMask IpAddressPrefixLength, vRtrAggregationRowStatus RowStatus, vRtrAggregationLastChanged TimeStamp, vRtrAggregationSummaryOnly TruthValue, vRtrAggregationASSet TruthValue, vRtrAggregationAggregatorAS TmnxBgpAutonomousSystem, vRtrAggregationAggregatorIPAddr IpAddress, vRtrAggregationOperState TmnxOperState } vRtrAggregationIpPrefix OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP address prefix to match for the aggregation." ::= { vRtrInstanceAggregationEntry 1 } vRtrAggregationIpPrefixMask OBJECT-TYPE SYNTAX IpAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "Mask length for vRtrAggregationIpPrefix, to match for the aggregation." ::= { vRtrInstanceAggregationEntry 2 } vRtrAggregationRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status for this entry." ::= { vRtrInstanceAggregationEntry 3 } vRtrAggregationLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-create STATUS current DESCRIPTION "Time stamp of last change of any object for this entry." ::= { vRtrInstanceAggregationEntry 4 } vRtrAggregationSummaryOnly OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When true(1), only the aggregate is advertised, the more specfic routes that make up the aggregate are not. When false(2), both the aggregate and more specific components are advertised." DEFVAL { false } ::= { vRtrInstanceAggregationEntry 5 } vRtrAggregationASSet OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When true(1), the AS-Path of the resulting aggregate will contain an AS-SET containing all AS numbers from the contributing routes. When false(2), the AS-Path will contain no AS-SET and will be originated by the ESR." DEFVAL { false } ::= { vRtrInstanceAggregationEntry 6 } vRtrAggregationAggregatorAS OBJECT-TYPE SYNTAX TmnxBgpAutonomousSystem MAX-ACCESS read-create STATUS current DESCRIPTION "When vRtrAggregationAggregatorAS is set to non zero, and vRtrAggregationAggregatorIPAddr is set to non-zero, the supplied ASN and IP address will be used for the aggregator path attributes. When omitted, automatically uses its own ASN & Router-ID." DEFVAL { 0 } ::= { vRtrInstanceAggregationEntry 7 } vRtrAggregationAggregatorIPAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "When vRtrAggregationAggregatorAS is set to non zero, and vRtrAggregationAggregatorIPAddr is set to non-zero, the supplied ASN and IP address will be used for the aggregator path attributes. When omitted, automatically uses its own ASN & Router-ID." DEFVAL { '00000000'H } -- 0.0.0.0 means not-set ::= { vRtrInstanceAggregationEntry 8 } vRtrAggregationOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrAggregationOperState specifies the current operational status of the aggregation entry." ::= { vRtrInstanceAggregationEntry 9 } -- -- Static Route Index Table -- -- A read-only table which suggests the available index - vRtrStaticRouteIndex -- for a given set of vRtrID, vRtrStaticRouteDest & vRtrStaticRouteMask. -- vRtrStaticRouteIndex will be the fourth index while configuring an entry -- into the vRtrStaticRouteTable. vRtrStaticRouteIndexTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrStaticRouteIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entity's Static Route Index Table." ::= { tmnxVRtrObjs 14 } vRtrStaticRouteIndexEntry OBJECT-TYPE SYNTAX VRtrStaticRouteIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The available index for the vRtrStaticRouteTable for every destination per virtual router." INDEX { vRtrID, vRtrStaticRouteIndexDest, vRtrStaticRouteIndexMask } ::= { vRtrStaticRouteIndexTable 1 } VRtrStaticRouteIndexEntry ::= SEQUENCE { vRtrStaticRouteIndexDest IpAddress, vRtrStaticRouteIndexMask IpAddress, vRtrStaticRouteAvailableIndex TestAndIncr } vRtrStaticRouteIndexDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination IP address of this index entry. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrStaticRouteMask object is not equal to x." ::= { vRtrStaticRouteIndexEntry 1 } vRtrStaticRouteIndexMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the vRtrStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the vRtrStaticRouteMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrStaticRouteDest object is not equal to vRtrStaticRouteDest." ::= { vRtrStaticRouteIndexEntry 2 } vRtrStaticRouteAvailableIndex OBJECT-TYPE SYNTAX TestAndIncr (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The available quaternary index for the vRtrStaticRouteTable." ::= { vRtrStaticRouteIndexEntry 3 } -- -- Tunnel Table -- vRtrTunnelTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "vRtrTunnelTable maintains a list of tunnels for the specific router instance." ::= { tmnxVRtrObjs 17 } vRtrTunnelEntry OBJECT-TYPE SYNTAX VRtrTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "vRtrTunnelEntry defines a tunnel to a particular destination in a specific router context. A tunnel to a specific destination could established using GRE, LDP, RSVP or could be a static LSP." INDEX { vRtrID, vRtrTunnelDest, vRtrTunnelMask, vRtrTunnelPreference, vRtrTunnelType, vRtrTunnelID, vRtrTunnelNexthop } ::= { vRtrTunnelTable 1 } VRtrTunnelEntry ::= SEQUENCE { vRtrTunnelDest IpAddress, vRtrTunnelMask IpAddress, vRtrTunnelPreference Unsigned32, vRtrTunnelType TmnxTunnelType, vRtrTunnelID TmnxTunnelID, vRtrTunnelNexthop IpAddress, vRtrTunnelMetric Unsigned32, vRtrTunnelAge Integer32 } vRtrTunnelDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "vRtrTunnelDest maintains the destination IP address of this tunnel. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrTunnelMask object is not equal to x." ::= { vRtrTunnelEntry 1 } vRtrTunnelMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "vRtrTunnelMask indicates the mask to be logical-ANDed with the destination address before being compared to the value in the vRtrTunnelDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the vRtrTunnelMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the ipCidrRouteDest object is not equal to ipCidrRouteDest." ::= { vRtrTunnelEntry 2 } vRtrTunnelPreference OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrTunnelPreference determines the priority of this tunnel versus the other tunnels from different sources such as LDP, RSVP, GRE etc. This is an absolute number used internally by the system to specify preferences for the tunnel. Lowest number signifies the most preferred entry in the table." ::= { vRtrTunnelEntry 3 } vRtrTunnelType OBJECT-TYPE SYNTAX TmnxTunnelType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of this tunnel entity." ::= { vRtrTunnelEntry 4 } vRtrTunnelID OBJECT-TYPE SYNTAX TmnxTunnelID MAX-ACCESS not-accessible STATUS current DESCRIPTION "Additional index provided to distinguish between multiple tunnels to same destination having same characteristics. There could be multiple tunnels for the type 'sdp'. In such cases the vRtrTunnelID will hold the SDP Id. There could be multiple tunnels for the type 'ldp'. In such cases the vRtrTunnelID will hold the LSPId of the LSP in use. For other vRtrTunnelType values this field will always be 0 as only a single tunnel is established using other tunnel types." ::= { vRtrTunnelEntry 5 } vRtrTunnelNexthop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address of the next system en route; Otherwise, 0.0.0.0." ::= { vRtrTunnelEntry 6 } vRtrTunnelMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrTunnelMetric maintains the metric of the tunnel. This is used in addition to the preference for this tunnel." ::= { vRtrTunnelEntry 7 } vRtrTunnelAge OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds since this tunnel entry was last updated or otherwise determined to be correct. No semantics of `too old' can be implied except through knowledge of owner of the tunnel." ::= { vRtrTunnelEntry 8 } -- -- Router-Advertisement Prefix Table -- vRtrAdvPrefixTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrAdvPrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table allows the user to configure IPv6 prefixes for router advertisements on an interface" ::= { tmnxVRtrObjs 23 } vRtrAdvPrefixEntry OBJECT-TYPE SYNTAX VRtrAdvPrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vRtrAdvPrefixTable." INDEX { vRtrID, vRtrAdvPrefixIfIndex, vRtrAdvPrefixPrefix, vRtrAdvPrefixLength } ::= { vRtrAdvPrefixTable 1 } VRtrAdvPrefixEntry ::= SEQUENCE { vRtrAdvPrefixIfIndex InterfaceIndex, vRtrAdvPrefixPrefix InetAddress, vRtrAdvPrefixLength InetAddressPrefixLength, vRtrAdvPrefixRowStatus RowStatus, vRtrAdvPrefixOnLinkFlag TruthValue, vRtrAdvPrefixAutonomousFlag TruthValue, vRtrAdvPrefixPreferredLifetime Unsigned32, vRtrAdvPrefixValidLifetime Unsigned32 } vRtrAdvPrefixIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value which uniquely identifies the interface on which this prefix is configured. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex." ::= { vRtrAdvPrefixEntry 1 } vRtrAdvPrefixPrefix OBJECT-TYPE SYNTAX InetAddress (SIZE (16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ipv6 address prefix. The length of this object is the standard length (16 bytes ) for IPv6 prefixes." ::= { vRtrAdvPrefixEntry 2 } vRtrAdvPrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength (4..127) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The prefix length associated with this prefix. The value 0 has no special meaning for this object." ::= { vRtrAdvPrefixEntry 3 } vRtrAdvPrefixRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status used for creation and deletion of router advertisement prefix entries." ::= { vRtrAdvPrefixEntry 4 } vRtrAdvPrefixOnLinkFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object has the value 'true(1)', if this prefix can be used for on-link determination and the value 'false(2)' otherwise." REFERENCE "For IPv6 RFC2461, especially sections 2 and 4.6.2 and RFC2462" DEFVAL { true } ::= { vRtrAdvPrefixEntry 5 } vRtrAdvPrefixAutonomousFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Autonomous address configuration flag. When true(1), indicates that this prefix can be used for autonomous address configuration (i.e. can be used to form a local interface address). If false(2), it is not used to auto- configure a local interface address." REFERENCE "For IPv6 RFC2461, especially sections 2 and 4.6.2 and RFC2462" DEFVAL { true } ::= { vRtrAdvPrefixEntry 6 } vRtrAdvPrefixPreferredLifetime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The remaining length of time in seconds that this prefix will continue to be preferred, i.e. time until deprecation. A value of 4,294,967,295 represents infinity. The address generated from a deprecated prefix should no longer be used as a source address in new communications, but packets received on such an interface are processed as expected." REFERENCE "For IPv6 RFC2461, especially sections 2 and 4.6.2 and RFC2462" DEFVAL { 604800 } ::= { vRtrAdvPrefixEntry 7 } vRtrAdvPrefixValidLifetime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The remaining length of time, in seconds, that this prefix will continue to be valid, i.e. time until invalidation. A value of 4,294,967,295 represents infinity. The address generated from an invalidated prefix should not appear as the destination or source address of a packet." REFERENCE "For IPv6 RFC2461, especially sections 2 and 4.6.2 and RFC2462" DEFVAL { 2592000 } ::= { vRtrAdvPrefixEntry 8 } -- -- Virtual router Static Route Table -- -- vRtrInetStaticRouteTable replaces the vRtrStaticRouteTable -- that supports configuration of static routes using only the -- IPv4 address style. The vRtrInetStaticRouteTable is IP version -- neutral and allows configuration of static routes using IPv4 or -- IPv6 InetAddress style. vRtrInetStaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrInetStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of addressing information relevant to this entity's Static Routing table." ::= { tmnxVRtrObjs 24 } vRtrInetStaticRouteEntry OBJECT-TYPE SYNTAX VRtrInetStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A particular route to a particular destination, through a particular next hop." INDEX { vRtrID, vRtrInetStaticRouteDestType, vRtrInetStaticRouteDest, vRtrInetStaticRouteDestPfxLen, vRtrInetStaticRouteIndex } ::= { vRtrInetStaticRouteTable 1 } VRtrInetStaticRouteEntry ::= SEQUENCE { vRtrInetStaticRouteDestType InetAddressType, vRtrInetStaticRouteDest InetAddress, vRtrInetStaticRouteDestPfxLen InetAddressPrefixLength, vRtrInetStaticRouteIndex INTEGER, vRtrInetStaticRouteRowStatus RowStatus, vRtrInetStaticRouteLastEnabledTime TimeStamp, vRtrInetStaticRouteStatus INTEGER, vRtrInetStaticRouteStaticType INTEGER, vRtrInetStaticRoutePreference Unsigned32, vRtrInetStaticRouteMetric Unsigned32, vRtrInetStaticRouteEgressIfIndex InterfaceIndexOrZero, vRtrInetStaticRouteNextHopType InetAddressType, vRtrInetStaticRouteNextHop InetAddress, vRtrInetStaticRouteNextHopIf DisplayString, vRtrInetStaticRouteAdminState TmnxAdminState, vRtrInetStaticRouteIgpShortcut BITS, vRtrInetStaticRouteDisallowIgp TruthValue, vRtrInetStaticRouteTag Unsigned32, vRtrInetStaticRouteEnableBfd TruthValue, vRtrInetStaticRouteCpeAddrType InetAddressType, vRtrInetStaticRouteCpeAddr InetAddress, vRtrInetStaticRouteCpeInterval Unsigned32, vRtrInetStaticRouteCpeDropCnt Unsigned32, vRtrInetStaticRouteCpeEnableLog TruthValue } vRtrInetStaticRouteDestType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrInetStaticRouteDestType indicates the address type of vRtrInetStaticRouteDest address." ::= { vRtrInetStaticRouteEntry 1 } vRtrInetStaticRouteDest OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrInetStaticRouteDest indicates the destination IP address of this static route." ::= { vRtrInetStaticRouteEntry 2 } vRtrInetStaticRouteDestPfxLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrInetStaticRouteDestPfxLen indicates the prefix length associated with the vRtrInetStaticRouteDest address." ::= { vRtrInetStaticRouteEntry 3 } vRtrInetStaticRouteIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrInetStaticRouteIndex indicates the fifth index for the vRtrInetStaticRouteTable. The fifth index to vRtrInetStaticRouteTable identifies a specific next-hop route to distinguish it from other routes that share the same destination address." ::= { vRtrInetStaticRouteEntry 4 } vRtrInetStaticRouteRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrInetStaticRouteRowStatus controls the creation and deletion of rows in the table." ::= { vRtrInetStaticRouteEntry 5 } vRtrInetStaticRouteLastEnabledTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetStaticRouteLastEnabledTime indicates the sysUpTime value when vRtrInetStaticRouteStatus was last set to active (1) to allow IP forwarding on this static route entry." ::= { vRtrInetStaticRouteEntry 6 } vRtrInetStaticRouteStatus OBJECT-TYPE SYNTAX INTEGER { active (1), inactive (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetStaticRouteStatus indicates whether or not this route entry is active in the system. When an interface transitions to the down state, any associated route entries are marked as 'inactive' and are usually not displayed in a standard route table listing. When the interface transitions to the up state, the agent marks the associated routes as 'active'" ::= { vRtrInetStaticRouteEntry 7 } vRtrInetStaticRouteStaticType OBJECT-TYPE SYNTAX INTEGER { unknown (0), nextHop (1), indirect (2), blackHole (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetStaticRouteStaticType specifies the type of static route represented by this row entry." DEFVAL { unknown } ::= { vRtrInetStaticRouteEntry 8 } vRtrInetStaticRoutePreference OBJECT-TYPE SYNTAX Unsigned32 (1..256) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetStaticRoutePreference specifies the priority of this static route versus the routes from different sources such as BGP or OSPF etc. Different protocols should not be configured with the same preference, if this occurs the tiebreaker is determined per the default preference value as defined in the table below. If multiple routes are learned with an identical preference using the same protocol, the lowest cost is used. If multiple routes are learned with an identical preference using the same protocol and the costs (metrics) are equal, then the decision as to what route to use is determined by the configuration of the ecmp command. Default preferences. Route Type Preference Configurable ---------- ---------- ------------ Direct attached 0 no Static-route 5 yes MPLS (post FCS) 7 OSPF Internal routes 10 no OSPF External 150 yes BGP 170 yes " DEFVAL { 5 } ::= { vRtrInetStaticRouteEntry 9 } vRtrInetStaticRouteMetric OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetStaticRouteMetric specifies the metric for the static route. When ipCidrRouteProto has a value of 'netmgmt' to specify that this entry is a static route, the value of vRtrInetStaticRouteMetric associates a metric value with the route. This value is used when importing this static route into other protocols such as OSPF. When the metric is configured as zero then the metric configured in OSPF, default-import-metric, applies. This value is also used to determine which static route to install in the forwarding table: If there are multiple static routes with the same preference but unequal metric then the lower cost (metric) route will be installed. If there are multiple static routes with equal preference and metrics then ecmp rules apply. If there are multiple routes with unequal preference then the lower preference route will be installed. " DEFVAL { 1 } ::= { vRtrInetStaticRouteEntry 10 } vRtrInetStaticRouteEgressIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetStaticRouteEgressIfIndex indicates the outgoing ifIndex for this route as computed by the static-route module. This variable will have a value of 0 if vRtrInetStaticRouteStatus is 'inactive' or if this static route is configured as a black hole." ::= { vRtrInetStaticRouteEntry 11 } vRtrInetStaticRouteNextHopType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetStaticRouteNextHopType specifies the address type of vRtrInetStaticRouteNextHop address." DEFVAL { unknown } ::= { vRtrInetStaticRouteEntry 12 } vRtrInetStaticRouteNextHop OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16|20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetStaticRouteNextHop specifies the address of the next hop for the static route. In case of remote routes, the address of the next system en route. This member is complemented by vRtrInetStaticRouteNextHopIf. At most only one of the two objects: vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf and can be non-null. If vRtrInetStaticRouteNextHopType is 'unknown' and vRtrInetStaticRouteNextHopIf is a null string then this static route is configured as a black hole." ::= { vRtrInetStaticRouteEntry 13 } vRtrInetStaticRouteNextHopIf OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetStaticRouteNextHopIf specifies the interface of the next hop for the static route. The name of the Interface which will be the nexthop for this route. This member is complemented by vRtrInetStaticRouteNextHop. At most only one of the two objects: vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf and can be non-null. If vRtrInetStaticRouteNextHopType is 'unknown' and vRtrInetStaticRouteNextHopIf is a null string then this static route is configured as a black hole." ::= { vRtrInetStaticRouteEntry 14 } vRtrInetStaticRouteAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetStaticRouteAdminState specifies the desired administrative state for this virtual router static route" DEFVAL { inService } ::= { vRtrInetStaticRouteEntry 15 } vRtrInetStaticRouteIgpShortcut OBJECT-TYPE SYNTAX BITS { te(0), ldp(1), ip(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetStaticRouteIgpShortcut specifies the Layer 2 tunneling mechanism used for IGP shortcuts. The value of vRtrInetStaticRouteIgpShortcut is valid only for indirect static routes (i.e. vRtrInetStaticRouteStaticType is 'indirect'). The bits of vRtrInetStaticRouteIgpShortcut identify Layer 2 tunneling mechanisms used for IGP shortcuts. If a bit is set, IGP shortcuts associated with that tunneling mechanism will be used to resolve next-hop for the static-route. If no bits are set, IGP shortcuts will not be used to resolve next-hop for the static routes. The tunneling mechanisms represented by each bit are: te(0) - RSVP Traffic Engineering ldp(1) - LDP /32 Route Forwarding Equivalence Class (FEC) ip(2) - IP (IP-in-IP or GRE) Evaluation of tunnel preference is based on the following order, in descending priority: 1. Traffic Engineered Shortcut (RSVP-TE) 2. LDP /32 Route FEC Shortcut 3. IP Shortcut (IP-in-IP or GRE) 4. Actual IGP Next-Hop." DEFVAL { { } } ::= { vRtrInetStaticRouteEntry 16 } vRtrInetStaticRouteDisallowIgp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetStaticRouteDisallowIgp specifies if IGP shortcuts are to be used or not. The value of vRtrInetStaticRouteDisallowIgp is valid only for indirect static routes (i.e. vRtrInetStaticRouteStaticType is 'indirect'). If the value of vRtrInetStaticRouteDisallowIgp is set to 'true', and if none of the defined tunneling mechanisms (RSVP-TE, LDP or IP) qualify as a next-hop, the normal IGP next-hop to the indirect next-hop address will not be used. If the value is set to 'false', IGP next-hop to the indirect next-hop address can be used as the next-hop of the last resort." DEFVAL { false } ::= { vRtrInetStaticRouteEntry 17 } vRtrInetStaticRouteTag OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetStaticRouteTag specifies a 32-bit integer tag that is used to add to the static route. This tag could then be used in route policies to control distribution of the route into other protocols. A value of 0 indicates that the tag has not been set." DEFVAL { 0 } ::= { vRtrInetStaticRouteEntry 18 } vRtrInetStaticRouteEnableBfd OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetStaticRouteEnableBfd specifies whether or not Bi-directional Forwarding Detection is enabled on this static route. When the value is 'true', this static-route can establish BFD sessions and use BFD as a signalling mechanism. When it is 'false', it cannot use BFD." DEFVAL { false } ::= { vRtrInetStaticRouteEntry 19 } vRtrInetStaticRouteCpeAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetStaticRouteCpeAddrType specifies the address type of vRtrInetStaticRouteCpeAddr address. When the value of vRtrInetStaticRouteCpeAddrType is not 'unknown', statitistics for the Customer-Provided Equipment (CPE) host checks for this static route entry will be found in the sparsely dependent table extension, vRtrInetStatRteCpeChkStatsTable." DEFVAL { unknown } ::= { vRtrInetStaticRouteEntry 20 } vRtrInetStaticRouteCpeAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetStaticRouteCpeAddr specifies the IP address of the target CPE device. When this object is configured, ICMP pings will be sent to this target IP address to determine CPE connectivity and whether this static route should be active. When the value of vRtrInetStaticRouteCpeAddr is non-empty, statitistics for the CPE host checks for this static route entry will be found in the sparsely dependent table extension, vRtrInetStatRteCpeChkStatsTable." DEFVAL { ''H } ::= { vRtrInetStaticRouteEntry 21 } vRtrInetStaticRouteCpeInterval OBJECT-TYPE SYNTAX Unsigned32 (1..255) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetStaticRouteCpeInterval specifies the interval, in seconds, between ICMP pings to the target CPE IP address, vRtrInetStaticRouteCpeAddr." DEFVAL { 1 } ::= { vRtrInetStaticRouteEntry 22 } vRtrInetStaticRouteCpeDropCnt OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetStaticRouteCpeDropCnt specifies the number of consecutive ping-replies that must be missed before concluding the CPE is down. If the CPE is determined to be down, the associated static route will be deactivated." DEFVAL { 3 } ::= { vRtrInetStaticRouteEntry 23 } vRtrInetStaticRouteCpeEnableLog OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetStaticRouteCpeEnableLog specifies whether to enable the logging of transitions between active and in-active based on the CPE connectivity check. A value of 'true (1)' indicates that logging should be enabled." DEFVAL { false } ::= { vRtrInetStaticRouteEntry 24 } -- -- Inet Static Route Index Table -- -- A read-only table which suggests the available -- index - vRtrInetStaticRouteIndex -- for a given set of vRtrID, vRtrInetStaticRouteDestType, -- vRtrInetStaticRouteDest & vRtrInetStaticRouteDestPfxLen. -- vRtrInetStaticRouteIndex will be the fifth index while -- configuring an entry into the vRtrInetStaticRouteTable. -- vRtrInetStaticRouteIndexTable table replaces vRtrStaticRouteIndexTable vRtrInetStaticRouteIndexTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrInetStaticRouteIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entity's Static Route Index Table." ::= { tmnxVRtrObjs 25 } vRtrInetStaticRouteIndexEntry OBJECT-TYPE SYNTAX VRtrInetStaticRouteIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The available index for the vRtrInetStaticRouteTable for every destination per virtual router." INDEX { vRtrID, vRtrInetStaticRouteDestType, vRtrInetStaticRouteDest, vRtrInetStaticRouteDestPfxLen } ::= { vRtrInetStaticRouteIndexTable 1 } VRtrInetStaticRouteIndexEntry ::= SEQUENCE { vRtrInetStaticRouteAvailIndex TestAndIncr } vRtrInetStaticRouteAvailIndex OBJECT-TYPE SYNTAX TestAndIncr (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetStaticRouteAvailIndex indicates the available fifth index for the vRtrInetStaticRouteTable. The fifth index to vRtrInetStaticRouteTable identifies a specific next-hop route to distinguish it from other routes that share the same destination address." ::= { vRtrInetStaticRouteIndexEntry 1 } -- -- VRtr instance aggregation objects -- vRtrInetInstAggrTblLastChged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of the last change to the vRtrInetInstAggrTable either from adding a row or removing a row." ::= { tmnxVRtrObjs 26 } -- vRtrInetInstAggrTable replaces the vRtrInstanceAggregationTable -- that supports configuration of aggregate routes using only the -- IPv4 address style. The vRtrInetInstAggrTable is IP version -- neutral and allows configuration of aggregate routes using IPv4 or -- IPv6 InetAddress style. vRtrInetInstAggrTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrInetInstAggrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrInetInstAggrTable is the list of configured virtual router aggregations and their operational status information. vRtrInetInstAggrTable specifies the route aggregates that should be generated into the virtual router if at least one contributing route (more specific) is learned. A route could match multiple aggregate statements. For instance, with the following entries: aggregate 10.0.0.0/8 aggregate 10.1.0.0/16 If the route 10.1.1.0/24 is learned, both aggregates would be generated." ::= { tmnxVRtrObjs 27 } vRtrInetInstAggrEntry OBJECT-TYPE SYNTAX VRtrInetInstAggrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "vRtrInetInstAggrEntry indicates an entry (conceptual row) in the vRtrInetInstAggrTable. Entries are created and destroyed by user." INDEX { vRtrID, vRtrInetAggrIpPrefixType, vRtrInetAggrIpPrefix, vRtrInetAggrIpPrefixLen } ::= { vRtrInetInstAggrTable 1 } VRtrInetInstAggrEntry ::= SEQUENCE { vRtrInetAggrIpPrefixType InetAddressType, vRtrInetAggrIpPrefix InetAddress, vRtrInetAggrIpPrefixLen InetAddressPrefixLength, vRtrInetAggrRowStatus RowStatus, vRtrInetAggrLastChanged TimeStamp, vRtrInetAggrSummaryOnly TruthValue, vRtrInetAggrASSet TruthValue, vRtrInetAggrAggregatorAS TmnxBgpAutonomousSystem, vRtrInetAggrAggregatorIPAddr IpAddress, vRtrInetAggrOperState TmnxOperState } vRtrInetAggrIpPrefixType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrInetAggrIpPrefixType indicates the IP address type of vRtrInetAggrIpPrefix." ::= { vRtrInetInstAggrEntry 1 } vRtrInetAggrIpPrefix OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrInetAggrIpPrefixType indicates the IP address prefix to match for the aggregation." ::= { vRtrInetInstAggrEntry 2 } vRtrInetAggrIpPrefixLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrInetAggrIpPrefixLen indicates the prefix length for vRtrInetAggrIpPrefix, to match for the aggregation." ::= { vRtrInetInstAggrEntry 3 } vRtrInetAggrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrInetAggrRowStatus controls the creation and deletion of rows in the table." ::= { vRtrInetInstAggrEntry 4 } vRtrInetAggrLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetAggrLastChanged specifies the time stamp of the last change to this row of vRtrInetInstAggrTable ." ::= { vRtrInetInstAggrEntry 5 } vRtrInetAggrSummaryOnly OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetAggrSummaryOnly specifies if specific routes that make up aggregates are advertised or not. When vRtrInetAggrSummaryOnly has value of 'true(1)', only the aggregate is advertised, the more specfic routes that make up the aggregate are not. When vRtrInetAggrSummaryOnly has value of 'false(2)', both the aggregate and more specific components are advertised." DEFVAL { false } ::= { vRtrInetInstAggrEntry 6 } vRtrInetAggrASSet OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetAggrASSet specifies whether the aggregate route has AS-SET. When vRtrInetAggrASSet has value of 'true(1)', the AS-Path of the resulting aggregate will contain an AS-SET containing all AS numbers from the contributing routes. When vRtrInetAggrASSet has value of 'false(2)', the AS-Path will contain no AS-SET and will be originated by the ESR." DEFVAL { false } ::= { vRtrInetInstAggrEntry 7 } vRtrInetAggrAggregatorAS OBJECT-TYPE SYNTAX TmnxBgpAutonomousSystem MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetAggrAggregatorAS specifies the aggregator's ASN. When vRtrInetAggrAggregatorAS is set to non zero, and vRtrInetAggrAggregatorIPAddr is set to non-zero, the supplied ASN and IP address will be used for the aggregator path attributes. When vRtrInetAggrAggregatorAS is not set, the aggregate routes ASN & Router-ID will be used for the aggregator path attributes." DEFVAL { 0 } ::= { vRtrInetInstAggrEntry 8 } vRtrInetAggrAggregatorIPAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetAggrAggregatorIPAddr specifies the aggregator's IP address. When vRtrInetAggrAggregatorAS is set to non zero, and vRtrInetAggrAggregatorIPAddr is set to non-zero, the supplied ASN and IP address will be used for the aggregator path attributes. When vRtrInetAggrAggregatorIPAddr is not set, the aggregate routes ASN & Router-ID will be used for the aggregator path attributes." DEFVAL { '00000000'H } -- 0.0.0.0 means not-set ::= { vRtrInetInstAggrEntry 9 } vRtrInetAggrOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetAggrOperState specifies the current operational status of the aggregation entry." ::= { vRtrInetInstAggrEntry 10 } -- -- Virtual Router Service Interface IP Address Range table -- IP-version independent -- vRtrInetSvcIpRangeTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrInetSvcIpRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrInetSvcIpRangeTable has an entry for each IP address range configured for a virtual interface in a virtual router in the system. An interface on the virtual router may have more than one Service IP address range assigned to it." ::= { tmnxVRtrObjs 28 } vRtrInetSvcIpRangeEntry OBJECT-TYPE SYNTAX VRtrInetSvcIpRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents an IP address range assigned a virtual router service interface. Setting RowStatus to 'active' requires values for all column variables to have been assigned." INDEX { vRtrID, vRtrInetSvcIpRangeAddrType, vRtrInetSvcIpRangeAddr, vRtrInetSvcIpRangePfxLen } ::= { vRtrInetSvcIpRangeTable 1 } VRtrInetSvcIpRangeEntry ::= SEQUENCE { vRtrInetSvcIpRangeAddrType InetAddressType, vRtrInetSvcIpRangeAddr InetAddress, vRtrInetSvcIpRangePfxLen InetAddressPrefixLength, vRtrInetSvcIpRangeRowStatus RowStatus, vRtrInetSvcIpRangeExclusive TruthValue } vRtrInetSvcIpRangeAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrInetSvcIpRangeAddrType indicates the IP address type of vRtrInetSvcIpRangeAddr." ::= { vRtrInetSvcIpRangeEntry 1 } vRtrInetSvcIpRangeAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrInetSvcIpRangeAddr indicates the IP address service range assigned to a router's service interface. The address type of vRtrInetSvcIpRangeAddr is indicated by vRtrInetSvcIpRangeAddrType." ::= { vRtrInetSvcIpRangeEntry 2 } vRtrInetSvcIpRangePfxLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrInetSvcIpRangePfxLen specifies the prefix length to be used with vRtrInetSvcIpRangeAddr for determining the IP address range." ::= { vRtrInetSvcIpRangeEntry 3 } vRtrInetSvcIpRangeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetSvcIpRangeRowStatus is used for creation and deletion of IP service prefix ranges." ::= { vRtrInetSvcIpRangeEntry 4 } vRtrInetSvcIpRangeExclusive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetSvcIpRangeExclusive specifies how the set of addresses specified by this entry are interpreted. When the value is 'true', they are reserved for services only and cannot be assigned to network ports. When the value is 'false', it could be used for services as well as network ports." DEFVAL { false } ::= { vRtrInetSvcIpRangeEntry 5 } -- -- Augmentation of the IP-MIB ipNetToPhysicalTable. -- Use of AUGMENTS clause implies a one-to-one dependent relationship between -- the base table, ipNetToPhysicalTable, and the augmenting table, -- vRtrIpNetToPhysicalTable. This in effect extends the ipNetToPhysicalTable -- with additional columns. Creation (or deletion) of a row in the -- ipNetToPhysicalTable results in the same fate for the row in the -- vRtrIpNetToPhysicalTable. -- -- ALCATEL CHANG --vRtrIpNetToPhysicalTable OBJECT-TYPE -- SYNTAX SEQUENCE OF VRtrIpNetToPhysicalEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "The vRtrIpNetToPhysicalTable provides an extension of the -- ipNetToPhysicalTable in the IP-MIB." -- ::= { tmnxVRtrObjs 29 } -- --vRtrIpNetToPhysicalEntry OBJECT-TYPE -- SYNTAX VRtrIpNetToPhysicalEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "Each row entry in the vRtrIpNetToPhysicalTable represents additional -- columns for attributes specific to the Alcatel 7x50 SR series -- implementation for the vRtrIpNetToPhysicalTable." -- AUGMENTS { ipNetToPhysicalEntry } -- ::= { vRtrIpNetToPhysicalTable 1 } -- --VRtrIpNetToPhysicalEntry ::= -- SEQUENCE { -- vRtrIpNetToPhysicalTimer Unsigned32, -- vRtrIpNetToPhysicalOperState TmnxOperState, -- vRtrIpNetToPhysicalIsRouter TruthValue, -- vRtrIpNetToPhysicalMTU Unsigned32, -- vRtrIpNetToPhysicalPort TmnxPortID, -- vRtrIpNetToPhysicalEncap TmnxEncapVal -- } -- --vRtrIpNetToPhysicalTimer OBJECT-TYPE -- SYNTAX Unsigned32 (0..65535) -- UNITS "seconds" -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The value of vRtrIpNetToPhysicalTimer indicates how much longer an ARP -- entry associated with an vRtrIpNetToPhysicalTable entry remains in the -- ARP cache. It is initially set to vRtrIfArpTimeout. When -- vRtrIpNetToPhysicalTimer has a value of zero, '0', the entry is cleared -- from the cache." -- ::= { vRtrIpNetToPhysicalEntry 1 } -- --vRtrIpNetToPhysicalOperState OBJECT-TYPE -- SYNTAX TmnxOperState -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The value of vRtrIpNetToPhysicalOperState indicates if the ARP entry is -- being used actively in the ARP Table. When ipNetToPhysicalType has a -- value 'dynamic', vRtrIpNetToPhysicalOperState will never have a value of -- 'outOfService'." -- ::= { vRtrIpNetToPhysicalEntry 2 } -- --vRtrIpNetToPhysicalIsRouter OBJECT-TYPE -- SYNTAX TruthValue -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The value of vRtrIpNetToPhysicalIsRouter indicates whether this -- ipNetToPhysicalEntry is a router." -- ::= { vRtrIpNetToPhysicalEntry 3 } -- --vRtrIpNetToPhysicalMTU OBJECT-TYPE -- SYNTAX Unsigned32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The value of vRtrIpNetToPhysicalMTU indicates the MTU of the link -- attached to this ipNetToPhysicalEntry." -- ::= { vRtrIpNetToPhysicalEntry 4 } -- --vRtrIpNetToPhysicalPort OBJECT-TYPE -- SYNTAX TmnxPortID -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The value of vRtrIpNetToPhysicalPort indicates the ID of the port -- on which this entry was learned." -- ::= { vRtrIpNetToPhysicalEntry 5 } -- --vRtrIpNetToPhysicalEncap OBJECT-TYPE -- SYNTAX TmnxEncapVal -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The value of vRtrIpNetToPhysicalEncap indicates the encap value -- of the SAP this entry was learned on. If this entry was learned -- on a network port or null-encap SAP, the value of this object -- will be zero." -- ::= { vRtrIpNetToPhysicalEntry 6 } -- ALCATEL CHANG -- ALCATEL CHANG -- Augmentation of the IP-FORWARD-MIB inetCidrRouteTable. -- Use of AUGMENTS clause implies a one-to-one dependent relationship between -- the base table, inetCidrRouteTable, and the augmenting table, -- vRtrInetCidrRouteTable. This in effect extends the inetCidrRouteTable with -- additional columns. Creation (or deletion) of a row in the -- inetCidrRouteTable results in the same fate for the row in the -- vRtrInetCidrRouteTable. -- --vRtrInetCidrRouteTable OBJECT-TYPE -- SYNTAX SEQUENCE OF VRtrInetCidrRouteEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "The vRtrInetCidrRouteTable provides an extension of the -- inetCidrRouteTable in the IP-FORWARD-MIB." -- ::= { tmnxVRtrObjs 30 } -- --vRtrInetCidrRouteEntry OBJECT-TYPE -- SYNTAX VRtrInetCidrRouteEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "Each row entry in the vRtrInetCidrRouteTable represents additional -- columns for attributes specific to the Alcatel 7x50 SR series -- implementation for the IP route table." -- AUGMENTS { inetCidrRouteEntry } -- ::= { vRtrInetCidrRouteTable 1 } -- --VRtrInetCidrRouteEntry ::= -- SEQUENCE { -- vRtrInetCidrRouteLastEnabledTime TimeStamp, -- vRtrInetCidrRoutePreference Unsigned32, -- vRtrInetCidrRouteMetric Unsigned32, -- vRtrInetCidrRouteIfVRtrId TmnxVRtrIDOrZero -- } -- --vRtrInetCidrRouteLastEnabledTime OBJECT-TYPE -- SYNTAX TimeStamp -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The vRtrInetCidrRouteLastEnabledTime variable indicates the sysUpTime -- value when ipCidrRouteStatus was last set to active (1) to -- allow IP forwarding on this route entry." -- ::= { vRtrInetCidrRouteEntry 1 } -- -- --vRtrInetCidrRoutePreference OBJECT-TYPE -- SYNTAX Unsigned32 (0..255) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The value of vRtrInetCidrRoutePreference specifies the priority -- of this static route versus the routes from different sources -- such as BGP or OSPF etc, when ipCidrRouteProto has a value of -- 'netmgmt' to indicate that this entry is a static route. -- -- Different protocols should not be configured with the same -- preference, if this occurs the tiebreaker is determined per the -- default preference value as defined in the table below. -- -- If multiple routes are learned with an identical preference -- using the same protocol, the lowest cost is used. If multiple -- routes are learned with an identical preference using the same -- protocol and the costs (metrics) are equal, then the decision -- as to what route to use is determined by the configuration of -- the ecmp command. -- -- Default preferences: -- -- Route Type Preference Configurable -- ---------- ---------- ------------ -- Direct attached 0 no -- Static-route 5 yes -- MPLS (post FCS) 7 -- OSPF Internal routes 10 no -- OSPF External 150 yes -- BGP 170 yes -- " -- DEFVAL { 5 } -- ::= { vRtrInetCidrRouteEntry 2 } -- --vRtrInetCidrRouteMetric OBJECT-TYPE -- SYNTAX Unsigned32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The value of vRtrInetCidrRouteMetric indicates the primary routing -- metric for this route. The semantics of this metric are determined -- by the routing-protocol specified in the route's ipCidrRouteProto -- value." -- ::= { vRtrInetCidrRouteEntry 3 } -- --vRtrInetCidrRouteIfVRtrId OBJECT-TYPE -- SYNTAX TmnxVRtrIDOrZero -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The value of vRtrInetCidrRouteIfVRtrId indicates the virtual router -- instance of the egress interface defined by inetCidrRouteIfIndex. -- This object is valid only for subscriber management routes. For all -- other route types, this object will have a value of zero." -- ::= { vRtrInetCidrRouteEntry 4 } -- -- Alcatel 7x50 SR series Virtual Router Global InterfaceIndex to -- vRtrID and vRtrIfIndex Mapping Table -- ALCATEL CHANG vRtrIfGlobalIndexTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIfGlobalIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a read-only table, each row of which represents a one to one equivalence between a unique system wide router interface index (vRtrIfGlobalIndex) and its corresponding virtual router ID (vRtrID) and index in the vRtrIfTable (vRtrIfIndex)." ::= { tmnxVRtrObjs 37 } vRtrIfGlobalIndexEntry OBJECT-TYPE SYNTAX VRtrIfGlobalIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the vRtrIfGlobalIndexTable corresponds to a row in the vRtrIfTable. When an entry is created or deleted in the vRtrIfTable, a corresponding entry is created or deleted in this table." INDEX { vRtrIfGlobalIndex } ::= { vRtrIfGlobalIndexTable 1 } VRtrIfGlobalIndexEntry ::= SEQUENCE { vRtrIfGlobalIndexvRtrID TmnxVRtrID, vRtrIfGlobalIndexvRtrIfIndex InterfaceIndex } vRtrIfGlobalIndexvRtrID OBJECT-TYPE SYNTAX TmnxVRtrID MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfGlobalIndexvRtrID indicates the vRtrID that maps to the vRtrIfGlobalIndex. The combination of a vRtrID and a vRtrIfIndex correspond to a system wide unique vRtrIfGlobalIndex. This value represents the specific instance of virtual router which the vRtrIfGlobalIndex belongs to." ::= { vRtrIfGlobalIndexEntry 1 } vRtrIfGlobalIndexvRtrIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfGlobalIndexvRtrIfIndex gives the value of vRtrIfIndex for a row in the vRtrIfTable. This row corresponds to the virtual router interface that maps to the vRtrIfGlobalIndex. The combination of a vRtrID and a vRtrIfIndex correspond to a system wide unique vRtrIfGlobalIndex." ::= { vRtrIfGlobalIndexEntry 2 } -- -- Alcatel 7x50 SR series Virtual Router Interface Proxy Neigbor -- Discovery Table -- -- Augmentation of the vRtrIfTable. -- Use of AUGMENTS clause implies a one-to-one dependent relationship -- between the base table, vRtrIfTable, and the augmenting table, -- vRtrIfProxyNDTable. This in effect extends the vRtrIfTable with -- additional columns. Creation (or deletion) of a row in the -- vRtrIfTable results in the same fate for the row in the -- vRtrIfProxyNDTable. -- vRtrIfProxyNDTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIfProxyNDEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrIfProxyNDTable provides an extension to the vRtrIfTable. It has an entry for each virtual router interface configured in the system." ::= { tmnxVRtrObjs 38 } vRtrIfProxyNDEntry OBJECT-TYPE SYNTAX VRtrIfProxyNDEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents information related to Proxy Neighbor Discovery for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations." AUGMENTS { vRtrIfEntry } ::= { vRtrIfProxyNDTable 1 } VRtrIfProxyNDEntry ::= SEQUENCE { vRtrIfProxyNDLocal TruthValue, vRtrIfProxyNDPolicy1 TPolicyStatementNameOrEmpty, vRtrIfProxyNDPolicy2 TPolicyStatementNameOrEmpty, vRtrIfProxyNDPolicy3 TPolicyStatementNameOrEmpty, vRtrIfProxyNDPolicy4 TPolicyStatementNameOrEmpty, vRtrIfProxyNDPolicy5 TPolicyStatementNameOrEmpty } vRtrIfProxyNDLocal OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If the value of vRtrIfProxyNDLocal is set to 'true', local proxy Neighbor Discovery is enabled, that is, the interface will reply to Neighbor Solicitation requests when both the hosts are on the same subnet. In this case ICMP redirects will be disabled. If the value of vRtrIfProxyNDLocal is set to 'false', the interface will not reply to Neighbor Solicitation requests if both the hosts are on the same subnet." DEFVAL { false } ::= { vRtrIfProxyNDEntry 1 } vRtrIfProxyNDPolicy1 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfProxyNDPolicy1 specifies the first proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled." DEFVAL { ''H } ::= { vRtrIfProxyNDEntry 2 } vRtrIfProxyNDPolicy2 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfProxyNDPolicy2 specifies the second proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled." DEFVAL { ''H } ::= { vRtrIfProxyNDEntry 3 } vRtrIfProxyNDPolicy3 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfProxyNDPolicy3 specifies the third proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled." DEFVAL { ''H } ::= { vRtrIfProxyNDEntry 4 } vRtrIfProxyNDPolicy4 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfProxyNDPolicy4 specifies the fourth proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled." DEFVAL { ''H } ::= { vRtrIfProxyNDEntry 5 } vRtrIfProxyNDPolicy5 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfProxyNDPolicy5 specifies the fifth proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled." DEFVAL { ''H } ::= { vRtrIfProxyNDEntry 6 } -- -- Alcatel 7x50 SR series -- Virtual Router DHCP6 prefix Delegation table -- vRtrIfDHCP6PfxDelegationLstChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6PfxDelegationLstChgd indicates the Timestamp of the last change to any row the vRtrIfDHCP6PfxDelegationTable" ::= { tmnxVRtrObjs 39 } vRtrIfDHCP6PfxDelegationTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIfDHCP6PfxDelegationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vRtrIfDHCP6PfxDelegationTable is used to configure the feature of automated delegation of IPv6 prefixes using DHCP6. This feature is intended for delegating a long-lived prefix from a delegating router to a requesting router, where the delegating router does not require knowledge about the topology of the links in the network to which the prefixes will be assigned." ::= { tmnxVRtrObjs 40 } vRtrIfDHCP6PfxDelegationEntry OBJECT-TYPE SYNTAX VRtrIfDHCP6PfxDelegationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a delegated IPv6 prefix. Entries can be created and deleted via SNMP SET operations. Creation requires a SET request containing the vRtrRowStatus." INDEX { vRtrID, vRtrIfIndex, vRtrIfDHCP6PfxdPrefix, vRtrIfDHCP6PfxdPrefixLen } ::= { vRtrIfDHCP6PfxDelegationTable 1 } VRtrIfDHCP6PfxDelegationEntry ::= SEQUENCE { vRtrIfDHCP6PfxdPrefix InetAddressIPv6, vRtrIfDHCP6PfxdPrefixLen InetAddressPrefixLength, vRtrIfDHCP6PfxdRowStatus RowStatus, vRtrIfDHCP6PfxdLastChanged TimeStamp, vRtrIfDHCP6PfxdDUID OCTET STRING, vRtrIfDHCP6PfxdIAID Unsigned32, vRtrIfDHCP6PfxdPrefLifetime Unsigned32, vRtrIfDHCP6PfxdValidLifetime Unsigned32 } vRtrIfDHCP6PfxdPrefix OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6PfxdPrefix specifies, together with the object vRtrIfDHCP6PfxdPrefixLen the ipv6 prefix that will be delegated." ::= { vRtrIfDHCP6PfxDelegationEntry 1 } vRtrIfDHCP6PfxdPrefixLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6PfxdPrefixLen specifies, together with the object vRtrIfDHCP6PfxdPrefix the ipv6 prefix that will be delegated by this system." ::= { vRtrIfDHCP6PfxDelegationEntry 2 } vRtrIfDHCP6PfxdRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6PfxdRowStatus specifies the Row status of this table row. This object is used to create or delete rows in this table. The only allowed values for this object are: active(1), createAndGo(4), and destroy(6)." ::= { vRtrIfDHCP6PfxDelegationEntry 3 } vRtrIfDHCP6PfxdLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfDHCP6PfxdLastChanged indicates the sysUpTime when any object of the row is last changed." ::= { vRtrIfDHCP6PfxDelegationEntry 4 } vRtrIfDHCP6PfxdDUID OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6PfxdDUID specifies the ID of the requesting router. If set to a non zero value the prefix defined in this row will only be delegated to this router. If set to zero, the prefix will be delegated to any requesting router." DEFVAL { ''H } -- the empty string ::= { vRtrIfDHCP6PfxDelegationEntry 6 } vRtrIfDHCP6PfxdIAID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6PfxdIAID specifies the IAID from the requesting router that needs to match in order to delegate the prefix defined in this row.If set to 0 no match on the received IAID is done." DEFVAL { 0 } ::= { vRtrIfDHCP6PfxDelegationEntry 7 } vRtrIfDHCP6PfxdPrefLifetime OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6PfxdPrefLifetime specifies the time in seconds that this prefix remains preferred. The value of vRtrIfDHCP6PfxdPrefLifetime cannot be bigger then the value of vRtrIfDHCP6PfxdValidLifetime. The value 4294967295 is considered equal to infinity." DEFVAL { 604800 } -- 7 days ::= { vRtrIfDHCP6PfxDelegationEntry 8 } vRtrIfDHCP6PfxdValidLifetime OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6PfxdValidLifetime specifies the time in seconds that the prefix is valid. The value 4294967295 is considered equal to infinity." DEFVAL { 2592000 } -- 30 days ::= { vRtrIfDHCP6PfxDelegationEntry 9 } -- -- Alcatel 7x50 SR series Virtual Router DHCP6 Statistics Table -- vRtrDHCP6DropStatTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrDHCP6DropStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrDHCP6DropStatTable has an entry for each virtual router configured in the system." ::= { tmnxVRtrObjs 41 } vRtrDHCP6DropStatEntry OBJECT-TYPE SYNTAX VRtrDHCP6DropStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a collection of DHCP6 drop reason statistics for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations." INDEX { vRtrID, vRtrDHCP6DropStatReason } ::= { vRtrDHCP6DropStatTable 1 } VRtrDHCP6DropStatEntry ::= SEQUENCE { vRtrDHCP6DropStatReason INTEGER, vRtrDHCP6DropStatLastCleared TimeStamp, vRtrDHCP6DropStatPktsDropped Gauge32 } vRtrDHCP6DropStatReason OBJECT-TYPE SYNTAX INTEGER { none ( 0 ), srcOperDown ( 1 ), dstOperDown ( 2 ), rlyReplyOnClientItf ( 3 ), hopCount ( 4 ), badRelayedMsg ( 5 ), clientItfNotFound ( 6 ), noMemory ( 7 ), noGlobalPfx ( 8 ), noSrcIp ( 9 ), noRteToServer ( 10 ), subMgmtUpdFail ( 11 ), relayForw ( 12 ), msgTooSmall ( 13 ), msgNotForServer ( 14 ), noServerId ( 15 ), noClientId ( 16 ), serverIdInClientMsg ( 17 ), wrongServerId ( 18 ), illegalUnicast ( 19 ), illegalSrcIp ( 20 ), pdMsgNotSupported ( 21 ), nbrAddrsExceeded ( 22 ), clientMacNotResolved ( 23 ), illegalAssignedAddr ( 24 ), msgEncodingError ( 25 ) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The object vRtrDHCP6DropStatReason indicates the drop reason for which the object vRtrDHCP6DropStatPktsDropped contains the counter. none srcOperDown Dhcp6 oper state is not Up on src itf dstOperDown Dhcp6 oper state is not Up on dst itf rlyReplyOnClientItf Relay Reply Msg on Client Itf hopCount Hop Count Limit reached badRelayedMsg Missing Relay Msg option, or illegal msg type clientItfNotFound Unable to determine destinatinon client Itf noMemory Out of Memory noGlobalPfx No global Pfx on Client Itf noSrcIp Unable to determine src Ip Addr noRteToServer No route to server subMgmtUpdFail Subscr. Mgmt. Update failed relayForw Received Relay Forw Message msgTooSmall Packet too small to contain valid dhcp6 msg msgNotForServer Server cannot respond to this message noServerId No Server Id option in msg from server noClientId No Client Id option in msg from client serverIdInClientMsg Server Id option in client msg wrongServerId Server DUID in client msg does not match ours illegalUnicast Client sent message to unicast while not allowed illegalSrcIp Client sent message with illegal src Ip pdMsgNotSupported Client message type not supported in pfx delegation nbrAddrsExceeded Nbr of addrs or pfxs exceeds allowed maximum in msg clientMacNotResolved Unable to resolve client's mac address illegalAssignedAddr The client was assigned an illegal address msgEncodingError Illegal pfx length in a IA_PREFIX option " ::= { vRtrDHCP6DropStatEntry 1 } vRtrDHCP6DropStatLastCleared OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrDHCP6DropStatLastCleared indicates the sysUpTime when the counters of this row were last reset. A value of zero for this object indicates that the counters have not been reset since the system has last been initialized." ::= { vRtrDHCP6DropStatEntry 2 } vRtrDHCP6DropStatPktsDropped OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrDHCP6DropStatPktsDropped indicates the number of DHCP6 packets were dropped for the reason described in vRtrDHCP6DropStatReason." ::= { vRtrDHCP6DropStatEntry 3 } -- -- Alcatel 7x50 SR series Virtual Router DHCP6 msg type Statistics Table -- vRtrDHCP6MsgStatTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrDHCP6MsgStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrDHCP6MsgStatTable has an entry for each virtual router configured in the system." ::= { tmnxVRtrObjs 42 } vRtrDHCP6MsgStatEntry OBJECT-TYPE SYNTAX VRtrDHCP6MsgStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a collection of counters for each DHCP6 message type for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations." INDEX { vRtrID, vRtrDHCP6MsgStatsMsgType } ::= { vRtrDHCP6MsgStatTable 1 } VRtrDHCP6MsgStatEntry ::= SEQUENCE { vRtrDHCP6MsgStatsMsgType TmnxDHCP6MsgType, vRtrDHCP6MsgStatsLstClrd TimeStamp, vRtrDHCP6MsgStatsRcvd Gauge32, vRtrDHCP6MsgStatsSent Gauge32, vRtrDHCP6MsgStatsDropped Gauge32 } vRtrDHCP6MsgStatsMsgType OBJECT-TYPE SYNTAX TmnxDHCP6MsgType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The object vRtrDHCP6MsgStatsMsgType indicates the DHCP6 message type for which statistics are kept on a per vrtr basis." ::= { vRtrDHCP6MsgStatEntry 1 } vRtrDHCP6MsgStatsLstClrd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrDHCP6MsgStatsLstClrd indicates the sysUpTime when the counters of this row were last reset. A value of zero for this object indicates that the counters have not been reset since the system has last been initialized." ::= { vRtrDHCP6MsgStatEntry 2 } vRtrDHCP6MsgStatsRcvd OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrDHCP6MsgStatsRcvd indicates the number of DHCP6 packets were received of the DHCP6 message type indicated by vRtrDHCP6MsgStatsMsgType." ::= { vRtrDHCP6MsgStatEntry 3 } vRtrDHCP6MsgStatsSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrDHCP6MsgStatsSent indicates the number of DHCP6 packets were sent of the DHCP6 message type indicated by vRtrDHCP6MsgStatsMsgType." ::= { vRtrDHCP6MsgStatEntry 4 } vRtrDHCP6MsgStatsDropped OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrDHCP6MsgStatsDropped indicates the number of DHCP6 packets were dropped of the DHCP6 message type indicated by vRtrDHCP6MsgStatsMsgType." ::= { vRtrDHCP6MsgStatEntry 5 } -- -- Virtual Router Interface IPCP table -- Use of AUGMENTS clause implies a one-to-one dependent relationship -- between the base table, vRtrIfTable, and the augmenting table, -- vRtrIfIpcpTable. This in effect extends the vRtrIfTable with -- additional columns. Creation (or deletion) of a row in the -- vRtrIfTable results in the same fate for the row in the -- vRtrIfIpcpTable. -- vRtrIfIpcpTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIfIpcpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrIfIpcpTable table contains the configuration for IPCP interface configuration on the vRtrIfEntry with the same indices." ::= { tmnxVRtrObjs 43 } vRtrIfIpcpEntry OBJECT-TYPE SYNTAX VRtrIfIpcpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents the IPCP configuration for an interface. Entries are created and deleted when entries in the vRtrIfTable are created and deleted." AUGMENTS { vRtrIfEntry } ::= { vRtrIfIpcpTable 1 } VRtrIfIpcpEntry ::= SEQUENCE { vRtrIfIpcpPeerAddrType InetAddressType, vRtrIfIpcpPeerAddr InetAddress, vRtrIfIpcpPriDnsAddrType InetAddressType, vRtrIfIpcpPriDnsAddr InetAddress, vRtrIfIpcpSecDnsAddrType InetAddressType, vRtrIfIpcpSecDnsAddr InetAddress } vRtrIfIpcpPeerAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIpcpPeerAddrType specifies the type of vRtrIfIpcpPeerAddr, the remote peer's IP address. vRtrIfIpcpPeerAddrType can be set to non-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6) When the value of vRtrIfIpcpPeerAddrType is unknown, the value of vRtrIfIpcpPeerAddr is assumed to be of size 0." DEFVAL { unknown } ::= { vRtrIfIpcpEntry 1 } vRtrIfIpcpPeerAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIpcpPeerAddr specifies the IP address that will be exchanged by IPCP, if applicable on a given interface, to configure the remote peer's IP address. The type of this address is specified by the value of vRtrIfIpcpPeerAddrType vRtrIfIpcpPeerAddr can be set to on-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6)" DEFVAL { ''H } ::= { vRtrIfIpcpEntry 2 } vRtrIfIpcpPriDnsAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIpcpPriDnsAddrType specifies the type of vRtrIfIpcpPriDnsAddr, the IP address of the primary DNS to be used by the remote peer. vRtrIfIpcpPriDnsAddrType can be set ito non-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6) When the value of vRtrIfIpcpPriDnsAddrType is unknown, the value of vRtrIfIpcpPriDnsAddr is assumed to be of size 0." DEFVAL { unknown } ::= { vRtrIfIpcpEntry 3 } vRtrIfIpcpPriDnsAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIpcpPriDnsAddr specifies the IP address that will be exchanged by IPCP, if applicable on a given interface, to configure the primary DNS's IP address on the remote peer. The type of this address is specified by the value of vRtrIfIpcpPriDnsAddrType vRtrIfIpcpPriDnsAddr can be set to non-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6)" DEFVAL { ''H } ::= { vRtrIfIpcpEntry 4 } vRtrIfIpcpSecDnsAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIpcpSecDnsAddrType specifies the type of vRtrIfIpcpSecDnsAddr, the IP address of the secondary DNS to be used by the remote peer. vRtrIfIpcpSecDnsAddrType can be set to non-deffault only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6) When the value of vRtrIfIpcpSecDnsAddrType is unknown, the value of vRtrIfIpcpSecDnsAddr is assumed to be of size 0." DEFVAL { unknown } ::= { vRtrIfIpcpEntry 5 } vRtrIfIpcpSecDnsAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIpcpSecDnsAddr specifies the IP address that will be exchanged by IPCP, if applicable on a given interface, to configure the secondary DNS's IP address on the remote peer. The type of this address is specified by the value of vRtrIfIpcpSecDnsAddrType. vRtrIfIpcpSecDnsAddr can be set to non-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6)" DEFVAL { ''H } ::= { vRtrIfIpcpEntry 6 } -- -- Alcatel 7x50 SR series Virtual Router Static Route CPE Check Statistics Table -- vRtrInetStatRteCpeChkStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrInetStatRteCpeChkStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrInetStatRteCpeChkStatsTable has an entry for each entry in the vRtrInetStaticRouteTable that has a non-default values set for the vRtrInetStaticRouteCpeAddrType and vRtrInetStaticRouteCpeAddr objects." ::= { tmnxVRtrObjs 44 } vRtrInetStatRteCpeChkStatsEntry OBJECT-TYPE SYNTAX VRtrInetStatRteCpeChkStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a collection of Customer-Provided Equipment (CPE) availability statistics for a virtual router static route in the system with non-default values set for the vRtrInetStaticRouteCpeAddrType and vRtrInetStaticRouteCpeAddr objects. Entries cannot be created and deleted via SNMP SET operations." INDEX { vRtrID, vRtrInetStaticRouteDestType, vRtrInetStaticRouteDest, vRtrInetStaticRouteDestPfxLen, vRtrInetStaticRouteIndex } ::= { vRtrInetStatRteCpeChkStatsTable 1 } VRtrInetStatRteCpeChkStatsEntry ::= SEQUENCE { vRtrInetStatRteCpeChkUpTime TimeTicks, vRtrInetStatRteCpeChkInPktCnt Counter32, vRtrInetStatRteCpeChkOutPktCnt Counter32, vRtrInetStatRteCpeChkDownTrans Gauge32, vRtrInetStatRteCpeChkUpTrans Gauge32, vRtrInetStatRteCpeChkTTL Unsigned32 } vRtrInetStatRteCpeChkUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetStatRteCpeChkUpTime indicates how long (in hundredths of a second) that the CPE has been available." ::= { vRtrInetStatRteCpeChkStatsEntry 1 } vRtrInetStatRteCpeChkInPktCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetStatRteCpeChkInPktCnt indicates the number of echo-reply packets received." ::= { vRtrInetStatRteCpeChkStatsEntry 2 } vRtrInetStatRteCpeChkOutPktCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetStatRteCpeChkOutPktCnt indicates the number of echo-request packets sent." ::= { vRtrInetStatRteCpeChkStatsEntry 3 } vRtrInetStatRteCpeChkDownTrans OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetStatRteCpeChkDownTrans indicates the number of times the CPE has transitioned to the unavailable state." ::= { vRtrInetStatRteCpeChkStatsEntry 4 } vRtrInetStatRteCpeChkUpTrans OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetStatRteCpeChkUpTrans indicates the number of times the CPE has transitioned to the available state." ::= { vRtrInetStatRteCpeChkStatsEntry 5 } vRtrInetStatRteCpeChkTTL OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetStatRteCpeChkTTL indicates the time, in seconds, before the CPE will be declared down. Upon receipt of an echo reply, it has the value of vRtrInetStaticRouteCpeInterval * vRtrInetStaticRouteCpeDropCnt and is decremented by 1 every second." ::= { vRtrInetStatRteCpeChkStatsEntry 6 } -- -- Application Id -> DSCP value mapping table -- tmnxDscpAppTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxDscpAppTableLastChanged indicates the sysUpTime at the time of the last modification of tmnxDscpAppTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxVRtrObjs 45 } tmnxDscpAppTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxDscpAppEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxDscpAppTable has an entry for each application to Differential Services Code Point (DSCP) mapping in a virtual routing context on this system." ::= { tmnxVRtrObjs 46 } tmnxDscpAppEntry OBJECT-TYPE SYNTAX TmnxDscpAppEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row represents a mapping from an application to a DSCP value for particular virtual routing context. Entries are created at system initialization." INDEX { vRtrID, tmnxDscpAppId } ::= { tmnxDscpAppTable 1} TmnxDscpAppEntry ::= SEQUENCE { tmnxDscpAppId TDSCPAppId, tmnxDscpAppLastChanged TimeStamp, tmnxDscpAppDscpValue TDSCPValueOrNone } tmnxDscpAppId OBJECT-TYPE SYNTAX TDSCPAppId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxDscpAppId indicates the DSCP application identifier for a protocol on the Alcatel 7x50 SR router which generates control traffic over IP." ::= { tmnxDscpAppEntry 1 } tmnxDscpAppLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxDscpAppLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxDscpAppEntry 2 } tmnxDscpAppDscpValue OBJECT-TYPE SYNTAX TDSCPValueOrNone MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tmnxDscpAppDscpValue specifies a DSCP Value to assign to the traffic generated by the application specified by tmnxDscpAppId. A value of -1 specifies that no explicit DSCP re-marking will be done for the traffic generated by the application specified by tmnxDscpAppId. The default value is protocol specific." ::= { tmnxDscpAppEntry 3 } -- -- DSCP Name -> Forwarding Class mapping table -- tmnxDscpFCTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxDscpFCTableLastChanged indicates the sysUpTime at the time of the last modification of tmnxDscpFCTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxVRtrObjs 47 } tmnxDscpFCTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxDscpFCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxDscpFCTable has an entry for each mapping between a DSCP value and a Forwarding Class for self-generated protocol traffic in a virtual routing context on this system." ::= { tmnxVRtrObjs 48 } tmnxDscpFCEntry OBJECT-TYPE SYNTAX TmnxDscpFCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row represents a mapping between a DSCP value and a Forwarding Class for self-generated protocol traffic in particular virtual routing context. Entries are created at system initialization." INDEX { vRtrID, tmnxDscpFCDscpValue } ::= { tmnxDscpFCTable 1} TmnxDscpFCEntry ::= SEQUENCE { tmnxDscpFCDscpValue TDSCPValue, tmnxDscpFCLastChanged TimeStamp, tmnxDscpFCValue TFCType } tmnxDscpFCDscpValue OBJECT-TYPE SYNTAX TDSCPValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxDscpFCDscpValue specifies a DSCP value which will be mapped to the Forwarding Class specified by tmnxDscpFCValue." ::= { tmnxDscpFCEntry 1 } tmnxDscpFCLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxDscpFCLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxDscpFCEntry 3 } tmnxDscpFCValue OBJECT-TYPE SYNTAX TFCType MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tmnxDscpFCValue specifies the Forwarding Class value for this mapping entry. The default value is best effort, which is specified by a value of 0." DEFVAL { be } ::= { tmnxDscpFCEntry 4 } -- -- Application Id -> 802.1p value mapping table -- tmnxDot1pAppTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxDot1pAppTableLastChanged indicates the sysUpTime at the time of the last modification of tmnxDot1pAppTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxVRtrObjs 49 } tmnxDot1pAppTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxDot1pAppEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxDot1pAppTable has an entry for each application to IEEE 802.1p priority (Dot1p) mapping in a virtual routing context on this system." ::= { tmnxVRtrObjs 50 } tmnxDot1pAppEntry OBJECT-TYPE SYNTAX TmnxDot1pAppEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row represents a mapping from an application to a Dot1p value for particular virtual routing context. Entries are created at system initialization." INDEX { vRtrID, tmnxDot1pAppId } ::= { tmnxDot1pAppTable 1} TmnxDot1pAppEntry ::= SEQUENCE { tmnxDot1pAppId TDot1pAppId, tmnxDot1pAppLastChanged TimeStamp, tmnxDot1pAppValue Dot1PPriority } tmnxDot1pAppId OBJECT-TYPE SYNTAX TDot1pAppId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxDot1pAppId indicates the Dot1p application identifier for a Layer-2 protocol on the Alcatel 7x50 SR router." ::= { tmnxDot1pAppEntry 1 } tmnxDot1pAppLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxDot1pAppLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxDot1pAppEntry 2 } tmnxDot1pAppValue OBJECT-TYPE SYNTAX Dot1PPriority MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tmnxDot1pAppValue specifies a Dot1p value to assign to the traffic generated by the application specified by tmnxDot1pAppId. The default value is protocol specific." ::= { tmnxDot1pAppEntry 3 } --%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -- -- Objects for AutoFilter trap tmnxVRtrNotificationObjects OBJECT IDENTIFIER ::= {tmnxVRtrObjs 21} vRtrAutoFilterDHCPClientAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS obsolete DESCRIPTION "The Client IP address from the PDU causing the trap. Used by tmnxVRtrDHCPAFEntriesExceeded to report the client's IP address." ::= { tmnxVRtrNotificationObjects 1 } vRtrAutoFilterDHCPClientLease OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS obsolete DESCRIPTION "The lease time specified in the PDU causing the trap. Used by tmnxVRtrDHCPAFEntriesExceeded to report the lease time." ::= { tmnxVRtrNotificationObjects 2 } --%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -- -- Objects for DHCP traps vRtrDHCPClientLease OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS obsolete DESCRIPTION "The value of the object vRtrDHCPClientLease indicates the lease time specified in the PDU causing the trap." ::= { tmnxVRtrNotificationObjects 3} vRtrDhcpLseStateOldCiAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS obsolete DESCRIPTION "The value of the object vRtrDhcpLseStateOldCiAddr indicates the Client IP address that was formerly assigned to this Least state." ::= { tmnxVRtrNotificationObjects 4} vRtrDhcpLseStateOldChAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS accessible-for-notify STATUS obsolete DESCRIPTION "The value of the object vRtrDhcpLseStateOldChAddr indicates the Client MAC address that was formerly assigned to this Least state." ::= { tmnxVRtrNotificationObjects 5} vRtrDhcpLseStateNewCiAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS obsolete DESCRIPTION "The value of the object vRtrDhcpLseStateNewCiAddr indicates the Client IP address specified in the PDU causing the trap." ::= { tmnxVRtrNotificationObjects 6} vRtrDhcpLseStateNewChAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS accessible-for-notify STATUS obsolete DESCRIPTION "The value of the object vRtrDhcpLseStateNewChAddr indicates the Client MAC address specified in the PDU causing the trap." ::= { tmnxVRtrNotificationObjects 7} vRtrDhcpRestoreLseStateCiAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS obsolete DESCRIPTION "The value of the object vRtrDhcpRestoreLseStateCiAddr indicates the IP address specified in the persistency record causing the trap." ::= { tmnxVRtrNotificationObjects 8} vRtrDhcpRestoreLseStateVRtrId OBJECT-TYPE SYNTAX TmnxVRtrID MAX-ACCESS accessible-for-notify STATUS obsolete DESCRIPTION "The value of the object vRtrDhcpRestoreLseStateVRtrId indicates the serviceId specified in the persistency record causing the trap." ::= { tmnxVRtrNotificationObjects 9} vRtrDhcpRestoreLseStateIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS accessible-for-notify STATUS obsolete DESCRIPTION "The value of the object vRtrDhcpRestoreLseStateIfIndex indicates the Port ID specified in the persistency record causing the trap." ::= { tmnxVRtrNotificationObjects 10} vRtrDhcpRestoreLseStateProblem OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS obsolete DESCRIPTION "The value of the object vRtrDhcpRestoreLseStateProblem indicates why the persisency record cannot be restored." ::= { tmnxVRtrNotificationObjects 11} vRtrDhcpPacketProblem OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object vRtrDhcpPacketProblem indicates information on a received DHCP packet is considered suspicious by the system." ::= { tmnxVRtrNotificationObjects 12} vRtrDhcpLseStatePopulateError OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS obsolete DESCRIPTION "The value of the object vRtrDhcpLseStatePopulateError indicates the reason why the system was unable to update the Lease state table with the information contained in the received DHCP ACK message." ::= { tmnxVRtrNotificationObjects 13} vRtrBfdSlotNumber OBJECT-TYPE SYNTAX TmnxSlotNum MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrBfdSlotNumber indicates the IOM slot number where the number of supported BFD sessions has reached the maximum value. This object is reported when the tmnxVRtrBfdMaxSessionOnSlot notification is generated." ::= { tmnxVRtrNotificationObjects 14} vRtrNumberOfBfdSessionsOnSlot OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrNumberOfBfdSessionsOnSlot indicates the current number of BFD sessions on the slot indicated by vRtrBfdSlotNumber. This object is reported when the tmnxVRtrBfdMaxSessionOnSlot notification is generated." ::= { tmnxVRtrNotificationObjects 15} vRtrBfdMaxSessionReason OBJECT-TYPE SYNTAX BITS { maxSessionsPerSlot(0), maxTxPacketRate(1), maxRxPacketRate(2) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrBfdMaxSessionReason indicates the reason the maximum numbers of sessions on this IOM slot was reached. This object is reported when the tmnxVRtrBfdMaxSessionOnSlot notification is generated." ::= { tmnxVRtrNotificationObjects 16} vRtrDHCP6ServerNetAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object vRtrDHCP6ServerNetAddrType indicates the address type of vRtrDHCP6ServerNetAddr." ::= { tmnxVRtrNotificationObjects 17 } vRtrDHCP6ServerNetAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object vRtrDHCP6ServerNetAddr indicates the IP address of the DHCP server." ::= { tmnxVRtrNotificationObjects 18 } vRtrDHCP6ClientNetAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object vRtrDHCP6ClientNetAddrType indicates the address type of vRtrDHCP6ClientNetAddr." ::= { tmnxVRtrNotificationObjects 19 } vRtrDHCP6ClientNetAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object vRtrDHCP6ClientNetAddr indicates the IP address of the DHCP client." ::= { tmnxVRtrNotificationObjects 20 } vRtrDHCP6AssignedNetAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object vRtrDHCP6AssignedNetAddrType indicates the address type of vRtrDHCP6AssignedNetAddr." ::= { tmnxVRtrNotificationObjects 21 } vRtrDHCP6AssignedNetAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object vRtrDHCP6AssignedNetAddr indicates the IP address assigned to the DHCP client." ::= { tmnxVRtrNotificationObjects 22 } vRtrDHCP6AssignedPrefixLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrDHCP6AssignedPrefixLen specifies the length of the IP netmask for vRtrDHCP6AssignedNetAddr." ::= { tmnxVRtrNotificationObjects 23 } vRtrDHCP6OldAssignedNetAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object vRtrDHCP6OldAssignedNetAddrType indicates the address type of vRtrDHCP6OldAssignedNetAddr." ::= { tmnxVRtrNotificationObjects 24 } vRtrDHCP6OldAssignedNetAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object vRtrDHCP6OldAssignedNetAddr indicates the IP address formerly assigned to the DHCP client." ::= { tmnxVRtrNotificationObjects 25 } vRtrDHCP6OldAssignedPrefixLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrDHCP6OldAssignedPrefixLen specifies the length of the IP netmask for vRtrDHCP6OldAssignedNetAddr." ::= { tmnxVRtrNotificationObjects 26 } vRtrDHCP6NewClientId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrDHCP6NewClientId indicates the new DHCP6 clients unique identifier (DUID)." ::= { tmnxVRtrNotificationObjects 27 } vRtrDHCP6OldClientId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrDHCP6OldClientId indicates the old DHCP6 clients unique identifier (DUID)." ::= { tmnxVRtrNotificationObjects 28 } vRtrDHCP6LeaseOverrideResult OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object vRtrDHCP6LeaseOverrideResult indicates whether or not the lease state has been overridden." ::= { tmnxVRtrNotificationObjects 29 } vRtrInetStatRteCpeNotifyAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object vRtrInetStatRteCpeNotifyAddrType indicates the address type of vRtrInetStatRteCpeNotifyAddr." ::= { tmnxVRtrNotificationObjects 30 } vRtrInetStatRteCpeNotifyAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object vRtrInetStatRteCpeNotifyAddr indicates the IP address of the CPE." ::= { tmnxVRtrNotificationObjects 31 } vRtrInetStaticRouteCpeStatus OBJECT-TYPE SYNTAX INTEGER { reachable (0), unreachable (1) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object vRtrInetStaticRouteCpeStatus indicates whether or not the CPE associated with a static route is 'reachable' or 'unreachable'." ::= { tmnxVRtrNotificationObjects 32 } vRtrManagedRouteInetAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrManagedRouteInetAddrType indicates the address type of vRtrManagedRouteInetAddr." ::= { tmnxVRtrNotificationObjects 33 } vRtrManagedRouteInetAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(0|4)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrManagedRouteInetAddr indicates the IP address of the managed route." ::= { tmnxVRtrNotificationObjects 34 } vRtrManagedRoutePrefixLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrManagedRoutePrefixLen indicates the prefix length of the subnet associated with vRtrManagedRouteInetAddr." ::= { tmnxVRtrNotificationObjects 35 } vRtrFailureDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object vRtrFailureDescription is a printable character string which contains information about the reason why the notification is sent." ::= { tmnxVRtrNotificationObjects 36 } --%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -- -- ALCATEL-IND1-TIMETRA-VRTR-MIB Notifications -- tmnxVRtrMidRouteTCA NOTIFICATION-TYPE OBJECTS { vRtrStatCurrNumRoutes, vRtrMidRouteThreshold } STATUS current DESCRIPTION "The tmnxVRtrMidRouteTCA notification is generated when the number of routes contained in a VPRN exceeds the value specified by vRtrMidRouteThreshold. No other notifications of this type are generated until after the soak period specified by vRtrRouteThresholdSoakTime has expired." ::= { tmnxVRtrNotifications 1 } tmnxVRtrHighRouteTCA NOTIFICATION-TYPE OBJECTS { vRtrStatCurrNumRoutes, vRtrHighRouteThreshold } STATUS current DESCRIPTION "The tmnxVRtrHighRouteTCA notification is generated when the number of routes contained in a VPRN exceeds the value specified by vRtrHighRouteThreshold. No other notifications of this type are generated until after the soak period specified by vRtrRouteThresholdSoakTime has expired." ::= { tmnxVRtrNotifications 2 } tmnxVRtrHighRouteCleared NOTIFICATION-TYPE OBJECTS { vRtrStatCurrNumRoutes, vRtrHighRouteThreshold } STATUS current DESCRIPTION "The tmnxVRtrHighRouteCleared notification is generated when the number of routes contained in a VPRN has dropped below the vRtrHighRouteThreshold value following the generation of a tmnxVRtrHighRouteTCA notification." ::= { tmnxVRtrNotifications 3 } tmnxVRtrIllegalLabelTCA NOTIFICATION-TYPE OBJECTS { vRtrStatIllegalLabels, vRtrIllegalLabelThreshold } STATUS current DESCRIPTION "The tmnxVRtrIllegalLabelTCA notification is generated when the number of illegal label violations on a VRF has exceeded the value specified by vRtrIllegalLabelThreshold." ::= { tmnxVRtrNotifications 4 } tmnxVRtrMcastMidRouteTCA NOTIFICATION-TYPE OBJECTS { vRtrMulticastRoutes, vRtrMcastMidRouteThreshold } STATUS current DESCRIPTION "The tmnxVRtrMcastMidRouteTCA notification is generated when the number of multicast routes contained in a VPRN exceeds the value specified by vRtrMcastMidRouteThreshold. No other notifications of this type are generated until after the soak period specified by vRtrRouteThresholdSoakTime has expired." ::= { tmnxVRtrNotifications 5 } tmnxVRtrMcastMaxRoutesTCA NOTIFICATION-TYPE OBJECTS { vRtrMulticastRoutes, vRtrMaxMcastNumRoutes } STATUS current DESCRIPTION "The tmnxVRtrMcastMaxRoutesTCA notification is generated when the number of multicast routes contained in a VPRN exceeds the value specified by vRtrMaxMcastNumRoutes. No other notifications of this type are generated until after the soak period specified by vRtrRouteThresholdSoakTime has expired." ::= { tmnxVRtrNotifications 6 } tmnxVRtrMcastMaxRoutesCleared NOTIFICATION-TYPE OBJECTS { vRtrMulticastRoutes, vRtrMaxMcastNumRoutes } STATUS current DESCRIPTION "The tmnxVRtrMcastMaxRoutesCleared notification is generated when the number of multicast routes contained in a VPRN has dropped below the vRtrMaxMcastNumRoutes value following the generation of a tmnxVRtrMcastMaxRoutesTCA notification." ::= { tmnxVRtrNotifications 7 } tmnxVRtrMaxArpEntriesTCA NOTIFICATION-TYPE OBJECTS { vRtrStatActiveARPEntries, vRtrStatTotalARPEntries, vRtrMaxARPEntries } STATUS current DESCRIPTION "The tmnxVRtrMaxArpEntriesTCA notification is generated when the number of ARP entries in a VPRN exceeds the maximum supported." ::= { tmnxVRtrNotifications 8 } tmnxVRtrMaxArpEntriesCleared NOTIFICATION-TYPE OBJECTS { vRtrStatActiveARPEntries, vRtrStatTotalARPEntries, vRtrMaxARPEntries } STATUS current DESCRIPTION "The tmnxVRtrMaxArpEntriesCleared notification is generated when the number of ARP entries contained in a VPRN has dropped below the maximum value following the generation of a tmnxVRtrMaxArpEntriesTCA notification." ::= { tmnxVRtrNotifications 9 } tmnxVRtrDHCPAFEntriesExceeded NOTIFICATION-TYPE OBJECTS { vRtrIfDHCPOperAutoFilter, vRtrIfIndex, vRtrAutoFilterDHCPClientAddress, vRtrAutoFilterDHCPClientLease } STATUS obsolete DESCRIPTION "The tmnxVRtrDHCPAFEntriesExceeded notification is generated when the number of DHCP 'AutoFilter' entries on a given interface reaches a user configurable upper limit given by vRtrIfDHCPAutoFilter." ::= {tmnxVRtrNotifications 10} tmnxVRtrMaxRoutes NOTIFICATION-TYPE OBJECTS { vRtrStatCurrNumRoutes, vRtrMaxNumRoutes } STATUS current DESCRIPTION "The tmnxVRtrMaxRoutes notification is generated when the number of routes contained in a VPRN reaches the value specified by vRtrMaxNumRoutes." ::= { tmnxVRtrNotifications 11 } tmnxVRtrDHCPLseStsExceeded NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrServiceId, vRtrIfIndex, vRtrDhcpLseStateNewCiAddr, vRtrDhcpLseStateNewChAddr, vRtrDHCPClientLease } STATUS obsolete DESCRIPTION "The tmnxVRtrDHCPLseStsExceeded notification is generated when the number of DHCP lease states entries on a given interface reaches a user configurable upper limit." ::= {tmnxVRtrNotifications 12} tmnxVRtrDHCPLeaseStateOverride NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrServiceId, vRtrIfIndex, vRtrDhcpLseStateNewCiAddr, vRtrDhcpLseStateNewChAddr, vRtrDhcpLseStateOldCiAddr, vRtrDhcpLseStateOldChAddr } STATUS obsolete DESCRIPTION "The tmnxVRtrDHCPLeaseStateOverride notification is generated when an existing DHCP lease state is overridden by a new lease state which has the same IP address but a different MAC address." ::= {tmnxVRtrNotifications 13} tmnxVRtrDHCPSuspiciousPcktRcvd NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrServiceId, vRtrIfIndex, vRtrDhcpPacketProblem } STATUS current DESCRIPTION "The tmnxVRtrDHCPSuspiciousPcktRcvd notification is generated when a DHCP packet is received with suspicious content." ::= {tmnxVRtrNotifications 14} tmnxVRtrDHCPLseStRestoreProblem NOTIFICATION-TYPE OBJECTS { vRtrDhcpRestoreLseStateVRtrId, vRtrDhcpRestoreLseStateIfIndex, vRtrDhcpRestoreLseStateCiAddr, vRtrDhcpRestoreLseStateProblem } STATUS obsolete DESCRIPTION "The tmnxVRtrDHCPLseStRestoreProblem notification is generated when an an error is detected while processing a persistency record." ::= {tmnxVRtrNotifications 15} tmnxVRtrDHCPLseStatePopulateErr NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrServiceId, vRtrIfIndex, vRtrDhcpLseStatePopulateError } STATUS obsolete DESCRIPTION "The tmnxVRtrDHCPLseStatePopulateErr notification indicates that the system was unable to update the Lease State Table with the information contained in the DHCP ACK message. The DHCP ACK message has been discarded." ::= {tmnxVRtrNotifications 16} tmnxVRtrBfdSessionDown NOTIFICATION-TYPE OBJECTS { vRtrIfBfdSessionLclDisc, vRtrIfBfdSessionOperFlags } STATUS current DESCRIPTION "The tmnxVRtrBfdSessionDown notification is generated when a BFD session goes down." ::= {tmnxVRtrNotifications 17} tmnxVRtrBfdMaxSessionOnSlot NOTIFICATION-TYPE OBJECTS { vRtrBfdSlotNumber, vRtrNumberOfBfdSessionsOnSlot, vRtrBfdMaxSessionReason } STATUS current DESCRIPTION "The tmnxVRtrBfdMaxSessionOnSlot notification is generated when the maximum number of BFD sessions has been reached on the slot indicated in 'vRtrBfdSlotNumber'." ::= {tmnxVRtrNotifications 18} tmnxVRtrBfdPortTypeNotSupported NOTIFICATION-TYPE OBJECTS { tmnxPortNotifyPortId, tmnxPortType } STATUS current DESCRIPTION "The tmnxVRtrBfdPortTypeNotSupported notification is generated when BFD is not supported on the port specified in 'tmnxPortNotifyPortId'." ::= {tmnxVRtrNotifications 19} tmnxVRtrDHCPIfLseStatesExceeded NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrServiceId, vRtrIfIndex, sapPortId, sapEncapValue, vRtrIfDHCPLeasePopulate, svcDhcpLseStateNewCiAddr, svcDhcpLseStateNewChAddr, svcDhcpClientLease } STATUS current DESCRIPTION "The tmnxVRtrDHCPIfLseStatesExceeded notifications is generated when the number of lease states on an interface exceeds vRtrIfDHCPLeasePopulate." ::= {tmnxVRtrNotifications 20} tmnxVRtrDHCP6RelayLseStExceeded NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrServiceId, vRtrIfIndex, vRtrIfDHCP6LeasePopulate, vRtrDHCP6AssignedNetAddrType, vRtrDHCP6AssignedNetAddr, vRtrDHCP6AssignedPrefixLen, vRtrDHCP6NewClientId, svcDhcpClientLease } STATUS current DESCRIPTION "The tmnxVRtrDHCP6RelayLseStExceeded notifications is generated when the number of lease states populated by dhcp6 relay on an interface exceeds vRtrIfDHCP6LeasePopulate." ::= {tmnxVRtrNotifications 21} tmnxVRtrDHCP6ServerLseStExceeded NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrServiceId, vRtrIfIndex, vRtrIfDHCP6ServerMaxLeaseStates, vRtrDHCP6AssignedNetAddrType, vRtrDHCP6AssignedNetAddr, vRtrDHCP6AssignedPrefixLen, vRtrDHCP6NewClientId, svcDhcpClientLease } STATUS current DESCRIPTION "The tmnxVRtrDHCP6ServerLseStExceeded notifications is generated when the number of lease states populated by dhcp6 server on an interface exceeds vRtrIfDHCP6ServerMaxLeaseStates." ::= {tmnxVRtrNotifications 22} tmnxVRtrDHCP6LseStateOverride NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrServiceId, vRtrIfIndex, vRtrDHCP6OldAssignedNetAddrType, vRtrDHCP6OldAssignedNetAddr, vRtrDHCP6OldAssignedPrefixLen, vRtrDhcpLseStateOldChAddr, vRtrDHCP6OldClientId, vRtrDHCP6AssignedNetAddrType, vRtrDHCP6AssignedNetAddr, vRtrDHCP6AssignedPrefixLen, vRtrDhcpLseStateNewChAddr, vRtrDHCP6NewClientId, vRtrDHCP6LeaseOverrideResult } STATUS current DESCRIPTION "The tmnxVRtrDHCP6LseStateOverride notifications is generated when an existing DHCP6 lease state can be overridden by a new lease state. This is allowed if the new lease state has the same IP address but a different client id or mac address. This is not allowed if the new lease state has the same IP address but a different prefix length." ::= {tmnxVRtrNotifications 23} tmnxVRtrDHCP6RelayReplyStripUni NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrServiceId, vRtrIfIndex, vRtrDHCP6ServerNetAddrType, vRtrDHCP6ServerNetAddr } STATUS current DESCRIPTION "The tmnxVRtrDHCP6RelayReplyStripUni notifications is generated when a unicast option is stripped from a message relayed from a server to a client in a relay reply message." ::= {tmnxVRtrNotifications 24} tmnxVRtrDHCP6IllegalClientAddr NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrServiceId, vRtrIfIndex, vRtrDHCP6ClientNetAddrType, vRtrDHCP6ClientNetAddr } STATUS current DESCRIPTION "The tmnxVRtrDHCP6IllegalClientAddr notifications is generated when an incoming message is dropped because the client's source IP does not match the subnet of the incoming interface." ::= {tmnxVRtrNotifications 25} tmnxVRtrDHCP6AssignedIllegSubnet NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrServiceId, vRtrIfIndex, vRtrDHCP6ClientNetAddrType, vRtrDHCP6ClientNetAddr, vRtrDHCP6AssignedNetAddrType, vRtrDHCP6AssignedNetAddr, vRtrDHCP6AssignedPrefixLen } STATUS current DESCRIPTION "The tmnxVRtrDHCP6AssignedIllegSubnet notifications is generated when an IP address assigned to the client does not match the subnet of the interface." ::= {tmnxVRtrNotifications 26} tmnxVRtrDHCP6ClientMacUnresolved NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrServiceId, vRtrIfIndex, vRtrDHCP6ClientNetAddrType, vRtrDHCP6ClientNetAddr } STATUS current DESCRIPTION "The tmnxVRtrDHCP6ClientMacUnresolved notifications is generated when we receive a relay reply for a client, and the client's MAC address has not been resolved yet." ::= {tmnxVRtrNotifications 27} tmnxVRtrBfdSessionUp NOTIFICATION-TYPE OBJECTS { vRtrIfBfdSessionLclDisc } STATUS current DESCRIPTION "The tmnxVRtrBfdSessionUp notification is generated when a BFD session goes up." ::= {tmnxVRtrNotifications 28} tmnxVRtrIPv6MidRouteTCA NOTIFICATION-TYPE OBJECTS { vRtrV6StatCurrNumRoutes, vRtrIPv6MidRouteThreshold } STATUS current DESCRIPTION "The tmnxVRtrIPv6MidRouteTCA notification is generated when the number of IPv6 routes contained in a VPRN exceeds the value specified by vRtrIPv6MidRouteThreshold. No other notifications of this type are generated until after the soak period specified by vRtrIPv6RouteThresholdSoakTime has expired." ::= { tmnxVRtrNotifications 29 } tmnxVRtrIPv6HighRouteTCA NOTIFICATION-TYPE OBJECTS { vRtrV6StatCurrNumRoutes, vRtrIPv6HighRouteThreshold } STATUS current DESCRIPTION "The tmnxVRtrIPv6HighRouteTCA notification is generated when the number of IPv6 routes contained in a VPRN exceeds the value specified by vRtrIPv6HighRouteThreshold. No other notifications of this type are generated until after the soak period specified by vRtrIPv6RouteThresholdSoakTime has expired." ::= { tmnxVRtrNotifications 30 } tmnxVRtrIPv6HighRouteCleared NOTIFICATION-TYPE OBJECTS { vRtrV6StatCurrNumRoutes, vRtrIPv6HighRouteThreshold } STATUS current DESCRIPTION "The tmnxVRtrIPv6HighRouteCleared notification is generated when the number of IPv6 routes contained in a VPRN has dropped below the vRtrIPv6HighRouteThreshold value following the generation of a tmnxVRtrIPv6HighRouteTCA notification." ::= { tmnxVRtrNotifications 31 } tmnxVRtrStaticRouteCPEStatus NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrInetStatRteCpeNotifyAddrType, vRtrInetStatRteCpeNotifyAddr, vRtrInetStaticRouteCpeStatus } STATUS current DESCRIPTION "The tmnxVRtrStaticRouteCPEStatus notification is generated when a CPE associated with a static route, as specified by the vRtrInetStatRteCpeNotifyAddr object, becomes reachable or unreachable." ::= { tmnxVRtrNotifications 32 } tmnxVRtrBfdSessionDeleted NOTIFICATION-TYPE OBJECTS { vRtrIfBfdSessionLclDisc, vRtrIfBfdSessionOperFlags } STATUS current DESCRIPTION "The tmnxVRtrBfdSessionDeleted notification is generated when a BFD session is deleted." ::= {tmnxVRtrNotifications 33 } tmnxVRtrBfdSessionProtChange NOTIFICATION-TYPE OBJECTS { vRtrIfBfdSessionLclDisc, vRtrIfBfdSessionProtocols } STATUS current DESCRIPTION "The tmnxVRtrBfdSessionProtChange notification is generated when there is a change in the list of protocols using the BFD session." ::= {tmnxVRtrNotifications 34 } tmnxVRtrManagedRouteAddFailed NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrManagedRouteInetAddrType, vRtrManagedRouteInetAddr, vRtrManagedRoutePrefixLen, vRtrFailureDescription } STATUS current DESCRIPTION "The tmnxVRtrManagedRouteAddFailed notification is generated when a managed route could not be installed." ::= { tmnxVRtrNotifications 35 } -- -- Conformance Information -- tmnxVRtrCompliances OBJECT IDENTIFIER ::= { tmnxVRtrConformance 1 } tmnxVRtrGroups OBJECT IDENTIFIER ::= { tmnxVRtrConformance 2 } -- compliance statements -- tmnxVRtrCompliance MODULE-COMPLIANCE -- ::= { tmnxVRtrCompliances 1 } -- tmnxVRtrR2r1Compliance MODULE-COMPLIANCE -- ::= { tmnxVRtrCompliances 2 } -- tmnxVRtrV3v0Compliance MODULE-COMPLIANCE -- ::= { tmnxVRtrCompliances 3 } tmnxVRtr7450V4v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of VRTR instances on Alcatel 7450 ESS series systems release R4.0." MODULE -- this module MANDATORY-GROUPS { tmnxVRtrGlobalR2r1Group, tmnxVRtrV4v0Group, tmnxVRtrIfV4v0Group, tmnxVRtrIpV4v0Group, -- tmnxVRtrIPv6V4v0Group, -- tmnxVRtrIPv6IpV4v0Group, -- tmnxVRtrIPv6IfV4v0Group, tmnxVRtrNotificationV4v0Group, tmnxVRtrIfSubscrAuthV3v0Group, tmnxVRtrBfdV4v0Group } ::= { tmnxVRtrCompliances 4 } tmnxVRtr7750V4v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of VRTR instances on Alcatel 7750 SR series systems release R4.0." MODULE -- this module MANDATORY-GROUPS { tmnxVRtrGlobalR2r1Group, tmnxVRtrV4v0Group, tmnxVRtrIfV4v0Group, tmnxVRtrIpV4v0Group, tmnxVRtrIPv6V4v0Group, tmnxVRtrIPv6IpV4v0Group, tmnxVRtrIPv6IfV4v0Group, tmnxVRtrNotificationV4v0Group, tmnxVRtrIfSubscrAuthV3v0Group, tmnxVRtrBfdV4v0Group } ::= { tmnxVRtrCompliances 5 } tmnxVRtr7450V5v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of VRTR instances on Alcatel 7450 ESS series systems release R5.0." MODULE -- this module MANDATORY-GROUPS { tmnxVRtrGlobalR2r1Group, tmnxVRtrV5v0Group, tmnxVRtrIfV5v0Group, tmnxVRtrIpV5v0Group, -- tmnxVRtrIPv6V4v0Group, -- tmnxVRtrIPv6IpV5v0Group, -- tmnxVRtrIPv6IfV4v0Group, tmnxVRtrNotificationV5v0Group, tmnxVRtrIfSubscrAuthV3v0Group, tmnxVRtrBfdV4v0Group } ::= { tmnxVRtrCompliances 6 } tmnxVRtr7750V5v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of VRTR instances on Alcatel 7750 SR series systems release R5.0." MODULE -- this module MANDATORY-GROUPS { tmnxVRtrGlobalR2r1Group, tmnxVRtrV5v0Group, tmnxVRtrIfV5v0Group, tmnxVRtrIpV5v0Group, tmnxVRtrIPv6V4v0Group, tmnxVRtrIPv6IpV5v0Group, tmnxVRtrIPv6IfV4v0Group, tmnxVRtrNotificationV5v0Group, tmnxVRtrIfSubscrAuthV3v0Group, tmnxVRtrBfdV4v0Group } ::= { tmnxVRtrCompliances 7 } tmnxVRtr7450V6v0Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for management of VRTR instances on Alcatel 7450 ESS series systems release R6.0." MODULE -- this module MANDATORY-GROUPS { tmnxVRtrGlobalV6v0Group, tmnxVRtrV6v0Group, tmnxVRtrIfV5v0Group, tmnxVRtrIpV5v0Group, -- tmnxVRtrIPv6V4v0Group, -- tmnxVRtrIPv6IpV5v0Group, -- tmnxVRtrIPv6IfV4v0Group, -- tmnxVRtrIfDhcpServerGroup, tmnxVRtrNotificationV6v0Group, tmnxVRtrIfSubscrAuthV3v0Group, tmnxVRtrBfdV6v0Group, tmnxVRtrStaticRteCPEChkV6v0Group, -- tmnxVRtrIfIpcpV6v0Group, tmnxDscpAppV6v0Group, tmnxVRtrIfDHCPRelayGroup } ::= { tmnxVRtrCompliances 8 } tmnxVRtr77x0V6v0Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for management of VRTR instances on Alcatel 7x50 SR series systems release R6.0." MODULE -- this module MANDATORY-GROUPS { tmnxVRtrGlobalV6v0Group, tmnxVRtrV6v0Group, tmnxVRtrIfV5v0Group, tmnxVRtrIpV5v0Group, tmnxVRtrIPv6V4v0Group, tmnxVRtrIPv6IpV5v0Group, tmnxVRtrIPv6IfV4v0Group, tmnxVRtrIfDhcpServerGroup, tmnxVRtrNotificationV6v0Group, tmnxVRtrIfSubscrAuthV3v0Group, tmnxVRtrBfdV6v0Group, tmnxVRtrStaticRteCPEChkV6v0Group, tmnxVRtrIfIpcpV6v0Group, tmnxVRtrIfCpmProtectGroup, tmnxDscpAppV6v0Group, tmnxVRtrIfDHCPRelayGroup } ::= { tmnxVRtrCompliances 9 } -- units of conformance -- tmnxVRtrGlobalGroup OBJECT-GROUP -- ::= { tmnxVRtrGroups 1 } -- tmnxVRtrGroup OBJECT-GROUP -- ::= { tmnxVRtrGroups 2 } -- tmnxVRtrIfGroup OBJECT-GROUP -- ::= { tmnxVRtrGroups 3 } -- tmnxVRtrIpGroup OBJECT-GROUP -- ::= { tmnxVRtrGroups 4 } -- tmnxVRtrNotificationGroup NOTIFICATION-GROUP -- ::= { tmnxVRtrGroups 5 } -- tmnxVRtrR2r1Group OBJECT-GROUP -- ::= { tmnxVRtrGroups 6 } -- tmnxVRtrIpR2r1Group OBJECT-GROUP -- ::= { tmnxVRtrGroups 7 } -- tmnxVRtrNotificationR2r1Group NOTIFICATION-GROUP -- ::= { tmnxVRtrGroups 8 } -- tmnxVRtrIfR2r1Group OBJECT-GROUP -- ::= { tmnxVRtrGroups 9 } tmnxVRtrGlobalR2r1Group OBJECT-GROUP OBJECTS { vRtrNextVRtrID, vRtrConfiguredVRtrs, vRtrActiveVRtrs, vRtrRouteThresholdSoakTime, vRtrMaxARPEntries } STATUS obsolete DESCRIPTION "The group of objects supporting management of general capabilities for transport and virtual routers on version 2.1 Alcatel 7x50 SR series systems." ::= { tmnxVRtrGroups 10 } tmnxVRtrIfSubscrAuthV3v0Group OBJECT-GROUP OBJECTS { vRtrIfDHCPAuthPolicy, vRtrIfDHCPRelayAuthPktsDiscarded, vRtrIfDHCPRelayAuthPktsSuccess } STATUS current DESCRIPTION "The group of objects supporting management of DHCP authentication on version 3.0 Alcatel 7x50 SR series systems." ::= { tmnxVRtrGroups 11 } -- tmnxVRtrIfV3v0Group OBJECT-GROUP -- ::= { tmnxVRtrGroups 12 } -- tmnxVRtrNotificationV3v0Group NOTIFICATION-GROUP -- ::= { tmnxVRtrGroups 13 } tmnxVRtrV4v0Group OBJECT-GROUP OBJECTS { vRtrRowStatus, vRtrAdminState, vRtrName, vRtrMaxNumRoutes, vRtrBgpStatus, vRtrMplsStatus, vRtrOspfStatus, vRtrRipStatus, vRtrRsvpStatus, vRtrEcmpMaxRoutes, vRtrAS, vRtrNewIfIndex, vRtrLdpStatus, vRtrIsIsStatus, vRtrRouterId, vRtrTriggeredPolicy, vRtrConfederationAS, vRtrRouteDistinguisher, vRtrMidRouteThreshold, vRtrHighRouteThreshold, vRtrIllegalLabelThreshold, vRtrVpnId, vRtrDescription, vRtrGracefulRestart, vRtrGracefulRestartType, vRtrType, vRtrServiceId, vRtrCustId, vRtrIgmpStatus, vRtrMaxNumRoutesLogOnly, vRtrVrfTarget, vRtrVrfExportTarget, vRtrVrfImportTarget, vRtrPimStatus, vRtrMaxMcastNumRoutes, vRtrMaxMcastNumRoutesLogOnly, vRtrMcastMidRouteThreshold, vRtrIgnoreIcmpRedirect, vRtrOspfv3Status, vRtrImportPolicy1, vRtrImportPolicy2, vRtrImportPolicy3, vRtrImportPolicy4, vRtrImportPolicy5, vRtrExportPolicy1, vRtrExportPolicy2, vRtrExportPolicy3, vRtrExportPolicy4, vRtrExportPolicy5, vRtrOperState, vRtrDirectRoutes, vRtrDirectActiveRoutes, vRtrStaticRoutes, vRtrStaticActiveRoutes, vRtrOSPFRoutes, vRtrOSPFActiveRoutes, vRtrBGPRoutes, vRtrBGPActiveRoutes, vRtrISISRoutes, vRtrISISActiveRoutes, vRtrRIPRoutes, vRtrRIPActiveRoutes, vRtrAggregateRoutes, vRtrAggregateActiveRoutes, vRtrStatConfiguredIfs, vRtrStatActiveIfs, vRtrStatIllegalLabels, vRtrStatCurrNumRoutes, vRtrStatBGPVpnRoutes, vRtrStatBGPVpnActiveRoutes, vRtrStatTotalLdpTunnels, vRtrStatTotalSdpTunnels, vRtrStatActiveLdpTunnels, vRtrStatActiveSdpTunnels, vRtrMulticastRoutes, vRtrStatActiveARPEntries, vRtrStatTotalARPEntries, vRtrSubMgmtRoutes, vRtrSubMgmtActiveRoutes } STATUS obsolete DESCRIPTION "The group of objects supporting management of transport and virtual routers on version 4.0 Alcatel 7x50 SR series systems." ::= { tmnxVRtrGroups 14 } tmnxVRtrIfV4v0Group OBJECT-GROUP OBJECTS { vRtrIfTotalNumber, vRtrIfRowStatus, vRtrIfType, vRtrIfName, vRtrIfPortID, vRtrIfChannelID, vRtrIfEncapValue, vRtrIfAdminState, vRtrIfOperState, vRtrIfAlias, vRtrIfPhysicalAddress, vRtrIfArpTimeout, vRtrIfIcmpMaskReply, vRtrIfIcmpRedirects, vRtrIfIcmpNumRedirects, vRtrIfIcmpRedirectsTime, vRtrIfIcmpUnreachables, vRtrIfIcmpNumUnreachables, vRtrIfIcmpUnreachablesTime, vRtrIfIcmpTtlExpired, vRtrIfIcmpNumTtlExpired, vRtrIfIcmpTtlExpiredTime, vRtrIfNtpBroadcast, vRtrIfUnnumbered, vRtrIfMtu, vRtrIfQosPolicyId, vRtrIfIngressFilterId, vRtrIfEgressFilterId, vRtrIfDirectedBroadcast, vRtrIfMplsStatus, vRtrIfUnnumberedIf, vRtrIfCflowd, vRtrIfVPNClass, vRtrIfDescription, vRtrIfProtocol, vRtrIfTosMarkingTrusted, vRtrIfServiceId, vRtrIfArpPopulate, vRtrIfProxyArp, vRtrIfProxyArpLocal, vRtrIfProxyArpPolicy1, vRtrIfProxyArpPolicy2, vRtrIfProxyArpPolicy3, vRtrIfProxyArpPolicy4, vRtrIfProxyArpPolicy5, vRtrIfNameIndex, vRtrIfDHCPRelayInfoAction, vRtrIfDHCPRelayCircuitId, vRtrIfDHCPRelayRemoteId, vRtrIfDHCPRelayServer1, vRtrIfDHCPRelayServer2, vRtrIfDHCPRelayServer3, vRtrIfDHCPRelayServer4, vRtrIfDHCPRelayServer5, vRtrIfDHCPRelayServer6, vRtrIfDHCPRelayServer7, vRtrIfDHCPRelayServer8, vRtrIfDHCPRelayTrusted, vRtrIfDHCPAdminState, vRtrIfDHCPDescription, vRtrIfDHCPRelayRxPkts, vRtrIfDHCPRelayTxPkts, vRtrIfDHCPRelayRxMalformedPkts, vRtrIfDHCPRelayRxUntrustedPkts, vRtrIfDHCPRelayClientPktsDiscarded, vRtrIfDHCPRelayClientPktsRelayed, vRtrIfDHCPRelayServerPktsDiscarded, vRtrIfDHCPRelayServerPktsRelayed, vRtrIfDHCPRelayClientPktsSnooped, vRtrIfDHCPRelayServerPktsSnooped, vRtrIfDHCPLeasePopulate, vRtrIfDHCPOperLeasePopulate, vRtrIfDHCPGiAddressType, vRtrIfDHCPGiAddress, vRtrIfDHCPGiAddressAsSrc, vRtrIfDHCPMatchOption82 } STATUS obsolete DESCRIPTION "The group of objects supporting management of virtual interfaces on version 4.0 Alcatel 7x50 SR series systems." ::= { tmnxVRtrGroups 15 } tmnxVRtrIpV4v0Group OBJECT-GROUP OBJECTS { vRiaRowStatus, vRiaIpAddress, vRiaNetMask, vRiaBcastAddrFormat, vRiaReasmMaxSize, vRiaIgpInhibit, vRiaInetAddressType, vRiaInetAddress, vRiaInetPrefixLen, vRiaInetAddrState, vRiaInetEui64, vRiaInetOperAddress, vRtrIpCidrRouteLastEnabledTime, vRtrIpCidrRoutePreference, vRtrIpCidrRouteMetric, vRtrStaticRouteDest, vRtrStaticRouteMask, vRtrStaticRouteIndex, vRtrStaticRouteNumber, vRtrStaticRouteRowStatus, vRtrStaticRouteLastEnabledTime, vRtrStaticRouteStatus, vRtrStaticRouteStaticType, vRtrStaticRoutePreference, vRtrStaticRouteMetric, vRtrStaticRouteEgressIfIndex, vRtrStaticRouteNextHop, vRtrStaticRouteNextHopUnnumberedIf, vRtrStaticRouteAdminState, vRtrStaticRouteIgpShortcut, vRtrStaticRouteDisallowIgp, vRtrStaticRouteTag, vRtrStaticRouteIndexDest, vRtrStaticRouteIndexMask, vRtrStaticRouteAvailableIndex, vRtrInetStaticRouteRowStatus, vRtrInetStaticRouteLastEnabledTime, vRtrInetStaticRouteStatus, vRtrInetStaticRouteStaticType, vRtrInetStaticRoutePreference, vRtrInetStaticRouteMetric, vRtrInetStaticRouteEgressIfIndex, vRtrInetStaticRouteNextHopType, vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf, vRtrInetStaticRouteAdminState, vRtrInetStaticRouteIgpShortcut, vRtrInetStaticRouteDisallowIgp, vRtrInetStaticRouteTag, vRtrInetStaticRouteEnableBfd, vRtrInetStaticRouteAvailIndex, vRtrSvcIpRangeRowStatus, vRtrSvcIpRangeExclusive, vRtrIpNetToMediaTimer, vRtrIpNetToMediaOperState, vRtrInstanceAggregationTableLastChanged, vRtrAggregationRowStatus, vRtrAggregationLastChanged, vRtrAggregationSummaryOnly, vRtrAggregationASSet, vRtrAggregationAggregatorAS, vRtrAggregationAggregatorIPAddr, vRtrAggregationOperState, vRtrTunnelMetric, vRtrTunnelAge, vRtrAdvPrefixOnLinkFlag, vRtrAdvPrefixAutonomousFlag, vRtrAdvPrefixPreferredLifetime, vRtrAdvPrefixValidLifetime, vRtrAdvPrefixRowStatus, vRtrInetInstAggrTblLastChged, vRtrInetAggrRowStatus, vRtrInetAggrLastChanged, vRtrInetAggrSummaryOnly, vRtrInetAggrASSet, vRtrInetAggrAggregatorAS, vRtrInetAggrAggregatorIPAddr, vRtrInetAggrOperState, vRtrInetSvcIpRangeRowStatus, -- ALCATEL CHANG -- vRtrInetSvcIpRangeExclusive, vRtrInetSvcIpRangeExclusive -- ALCATEL CHANGE -- ALCATEL CHANGE -- vRtrIpNetToPhysicalTimer, -- vRtrIpNetToPhysicalOperState, -- vRtrIpNetToPhysicalIsRouter, -- vRtrIpNetToPhysicalMTU, -- vRtrIpNetToPhysicalPort, -- vRtrIpNetToPhysicalEncap, -- vRtrInetCidrRouteLastEnabledTime, -- vRtrInetCidrRoutePreference, -- vRtrInetCidrRouteMetric -- ALCATEL CHANG } STATUS obsolete DESCRIPTION "The group of objects supporting management of IP capabilities for transport and virtual routers on version 4.0 Alcatel 7x50 SR series systems." ::= { tmnxVRtrGroups 16 } tmnxVRtrObsoletedObjectsV4v0Group OBJECT-GROUP OBJECTS { vRtrIfDHCPLseStateChAddr, vRtrIfDHCPLseStateRemainLseTime, vRtrIfDHCPLseStateOption82, vRtrIfDHCPLseStatePersistKey, vRtrDHCPClientLease, vRtrDhcpLseStateOldCiAddr, vRtrDhcpLseStateOldChAddr, vRtrDhcpLseStateNewCiAddr, vRtrDhcpLseStateNewChAddr, vRtrDhcpRestoreLseStateCiAddr, vRtrDhcpRestoreLseStateVRtrId, vRtrDhcpRestoreLseStateIfIndex, vRtrDhcpRestoreLseStateProblem, vRtrDhcpLseStatePopulateError, vRtrIfDHCPRelayInfoOption, vRtrIfDHCPAutoFilter, vRtrIfDHCPSnooping, vRtrIfDHCPAutoFilterId, vRtrIfDHCPOperAutoFilter, vRtrAutoFilterDHCPClientAddress, vRtrAutoFilterDHCPClientLease } STATUS current DESCRIPTION "The group of objects no longer supported in version 4.0 of Alcatel 7x50 SR series systems." ::= { tmnxVRtrGroups 17 } tmnxVRtrBfdV4v0Group OBJECT-GROUP OBJECTS { vRtrIfBfdAdminState, vRtrIfBfdTransmitInterval, vRtrIfBfdReceiveInterval, vRtrIfBfdMultiplier, vRtrIfBfdSessionOperState, vRtrIfBfdSessionState, vRtrIfBfdSessionOperFlags, vRtrIfBfdSessionMesgRecv, vRtrIfBfdSessionMesgSent, vRtrIfBfdSessionLastDownTime, vRtrIfBfdSessionLastUpTime, vRtrIfBfdSessionUpCount, vRtrIfBfdSessionDownCount, vRtrIfBfdSessionLclDisc, vRtrIfBfdSessionRemDisc, vRtrIfBfdSessionProtocols, vRtrIfBfdSessionTxInterval, vRtrIfBfdSessionRxInterval } STATUS obsolete DESCRIPTION "The group of objects supporting Bi-directional Forwarding Detection on version 4.0 Alcatel 7x50 series systems." ::= { tmnxVRtrGroups 18 } tmnxVRtrNotificationV4v0Group NOTIFICATION-GROUP NOTIFICATIONS { tmnxVRtrMidRouteTCA, tmnxVRtrHighRouteTCA, tmnxVRtrHighRouteCleared, tmnxVRtrIllegalLabelTCA, tmnxVRtrMcastMidRouteTCA, tmnxVRtrMcastMaxRoutesTCA, tmnxVRtrMcastMaxRoutesCleared, tmnxVRtrMaxArpEntriesTCA, tmnxVRtrMaxArpEntriesCleared, tmnxVRtrMaxRoutes, tmnxVRtrDHCPSuspiciousPcktRcvd, tmnxVRtrBfdSessionDown, tmnxVRtrBfdMaxSessionOnSlot, tmnxVRtrBfdPortTypeNotSupported } STATUS obsolete DESCRIPTION "The group of notifications supporting the transport and virtual router capabilities on version 4.0 Alcatel 7x50 SR series systems." ::= { tmnxVRtrGroups 19 } tmnxVRtrIPv6IfV4v0Group OBJECT-GROUP OBJECTS { vRtrIfIPv6ConfigAllowed, vRtrIfIPv6OperState, vRtrIfIPv6IngressFilterId, vRtrIfIPv6EgressFilterId, vRtrIfIcmpV6Redirects, vRtrIfIcmpV6NumRedirects, vRtrIfIcmpV6RedirectsTime, vRtrIfIcmpV6Unreachables, vRtrIfIcmpV6NumUnreachables, vRtrIfIcmpV6UnreachablesTime, vRtrIfIcmpV6TimeExceeded, vRtrIfIcmpV6NumTimeExceeded, vRtrIfIcmpV6TimeExceededTime, vRtrIfIcmpV6PktTooBig, vRtrIfIcmpV6NumPktTooBig, vRtrIfIcmpV6PktTooBigTime, vRtrIfIcmpV6ParamProblem, vRtrIfIcmpV6NumParamProblem, vRtrIfIcmpV6ParamProblemTime, vRtrIfLinkLocalAddressType, vRtrIfLinkLocalAddressState, vRtrIfLinkLocalAddress, vRtrIfIcmp6InMsgs, vRtrIfIcmp6InErrors, vRtrIfIcmp6InDestUnreachs, vRtrIfIcmp6InAdminProhibs, vRtrIfIcmp6InTimeExcds, vRtrIfIcmp6InParmProblems, vRtrIfIcmp6InPktTooBigs, vRtrIfIcmp6InEchos, vRtrIfIcmp6InEchoReplies, vRtrIfIcmp6InRtrSolicits, vRtrIfIcmp6InRtrAdvertisements, vRtrIfIcmp6InNbrSolicits, vRtrIfIcmp6InNbrAdvertisements, vRtrIfIcmp6InRedirects, vRtrIfIcmp6InGrpMembQueries, vRtrIfIcmp6InGrpMembResponses, vRtrIfIcmp6InGrpMembReductions, vRtrIfIcmp6OutMsgs, vRtrIfIcmp6OutErrors, vRtrIfIcmp6OutDestUnreachs, vRtrIfIcmp6OutAdminProhibs, vRtrIfIcmp6OutTimeExcds, vRtrIfIcmp6OutParmProblems, vRtrIfIcmp6OutPktTooBigs, vRtrIfIcmp6OutEchos, vRtrIfIcmp6OutEchoReplies, vRtrIfIcmp6OutRtrSolicits, vRtrIfIcmp6OutRtrSolicitsTime, vRtrIfIcmp6OutRtrAdvertisements, vRtrIfIcmp6OutRtrAdvTime, vRtrIfIcmp6OutNbrSolicits, vRtrIfIcmp6OutNbrSolicitsTime, vRtrIfIcmp6OutNbrAdvertisements, vRtrIfIcmp6OutNbrAdvTime, vRtrIfIcmp6OutRedirects, vRtrIfIcmp6OutGrpMembQueries, vRtrIfIcmp6OutGrpMembResponses, vRtrIfIcmp6OutGrpMembReductions, vRtrIcmp6InMsgs, vRtrIcmp6InErrors, vRtrIcmp6InDestUnreachs, vRtrIcmp6InAdminProhibs, vRtrIcmp6InTimeExcds, vRtrIcmp6InParmProblems, vRtrIcmp6InPktTooBigs, vRtrIcmp6InEchos, vRtrIcmp6InEchoReplies, vRtrIcmp6InRtrSolicits, vRtrIcmp6InRtrAdvertisements, vRtrIcmp6InNbrSolicits, vRtrIcmp6InNbrAdvertisements, vRtrIcmp6InRedirects, vRtrIcmp6InGrpMembQueries, vRtrIcmp6InGrpMembResponses, vRtrIcmp6InGrpMembReductions, vRtrIcmp6OutMsgs, vRtrIcmp6OutErrors, vRtrIcmp6OutDestUnreachs, vRtrIcmp6OutAdminProhibs, vRtrIcmp6OutTimeExcds, vRtrIcmp6OutParmProblems, vRtrIcmp6OutPktTooBigs, vRtrIcmp6OutEchos, vRtrIcmp6OutEchoReplies, vRtrIcmp6OutRtrSolicits, vRtrIcmp6OutRtrAdvertisements, vRtrIcmp6OutNbrSolicits, vRtrIcmp6OutNbrAdvertisements, vRtrIcmp6OutRedirects, vRtrIcmp6OutGrpMembQueries, vRtrIcmp6OutGrpMembResponses, vRtrIcmp6OutGrpMembReductions } STATUS current DESCRIPTION "The group of objects supporting management of IPv6 virtual interfaces on version 4.0 Alcatel 7x50 SR series systems." ::= { tmnxVRtrGroups 20 } tmnxVRtrIPv6V4v0Group OBJECT-GROUP OBJECTS { vRtrV6DirectRoutes, vRtrV6DirectActiveRoutes, vRtrV6StaticRoutes, vRtrV6StaticActiveRoutes, vRtrV6OSPFRoutes, vRtrV6OSPFActiveRoutes, vRtrV6BGPRoutes, vRtrV6BGPActiveRoutes, vRtrV6ISISRoutes, vRtrV6ISISActiveRoutes, vRtrV6RIPRoutes, vRtrV6RIPActiveRoutes, vRtrV6AggregateRoutes, vRtrV6AggregateActiveRoutes, vRtrV6StatConfiguredIfs, vRtrV6StatActiveIfs, vRtrV6StatIllegalLabels, vRtrV6StatCurrNumRoutes, vRtrV6StatBGPVpnRoutes, vRtrV6StatBGPVpnActiveRoutes, vRtrV6StatTotalLdpTunnels, vRtrV6StatTotalSdpTunnels, vRtrV6StatActiveLdpTunnels, vRtrV6StatActiveSdpTunnels, vRtrV6MulticastRoutes, vRtrV6StatActiveNbrEntries, vRtrV6StatTotalNbrEntries } STATUS current DESCRIPTION "The group of objects supporting management of IPv6 transport and virtual routers on version 4.0 Alcatel 7x50 SR series systems." ::= { tmnxVRtrGroups 21 } tmnxVRtrIPv6IpV4v0Group OBJECT-GROUP OBJECTS { vRtrAdvPrefixOnLinkFlag, vRtrAdvPrefixAutonomousFlag, vRtrAdvPrefixPreferredLifetime, vRtrAdvPrefixValidLifetime, vRtrAdvPrefixRowStatus } STATUS obsolete DESCRIPTION "The group of objects supporting management of Ipv6 IP capabilities for transport and virtual routers on version 4.0 Alcatel 7x50 SR series systems." ::= { tmnxVRtrGroups 22 } tmnxVRtrObsoleteNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { tmnxVRtrDHCPAFEntriesExceeded, tmnxVRtrDHCPLseStsExceeded, tmnxVRtrDHCPLeaseStateOverride, tmnxVRtrDHCPLseStRestoreProblem, tmnxVRtrDHCPLseStatePopulateErr } STATUS current DESCRIPTION "The group of obsolete notifications for the transport and virtual router capabilities on Alcatel 7x50 SR series systems." ::= { tmnxVRtrGroups 23 } tmnxVRtrIPv6IpV5v0Group OBJECT-GROUP OBJECTS { vRtrAdvPrefixOnLinkFlag, vRtrAdvPrefixAutonomousFlag, vRtrAdvPrefixPreferredLifetime, vRtrAdvPrefixValidLifetime, vRtrAdvPrefixRowStatus, vRtrIfDHCP6TableLastChanged, vRtrIfDHCP6LastChanged, vRtrIfDHCP6AdminState, vRtrIfDHCP6OperState, vRtrIfDHCP6Description, vRtrIfDHCP6RelayServer1, vRtrIfDHCP6RelayServer2, vRtrIfDHCP6RelayServer3, vRtrIfDHCP6RelayServer4, vRtrIfDHCP6RelayServer5, vRtrIfDHCP6RelayServer6, vRtrIfDHCP6RelayServer7, vRtrIfDHCP6RelayServer8, vRtrIfDHCP6RelayItfIdOption, vRtrIfDHCP6LeasePopulate, vRtrIfDHCP6CurrLeasePopulate, vRtrIfDHCP6SourceAddress, vRtrIfDHCP6EnableNgbrResolution, vRtrIfDHCP6RemoteIdOption, vRtrIfDHCP6PfxdAdminState, vRtrIfDHCP6ServerMaxLeaseStates, vRtrIfDHCP6CurrServerLeaseStates, vRtrIfDHCP6ItfIdString, vRtrIfProxyNDLocal, vRtrIfProxyNDPolicy1, vRtrIfProxyNDPolicy2, vRtrIfProxyNDPolicy3, vRtrIfProxyNDPolicy4, vRtrIfProxyNDPolicy5, vRtrIfDHCP6PfxdRowStatus, vRtrIfDHCP6PfxdLastChanged, vRtrIfDHCP6PfxdDUID, vRtrIfDHCP6PfxdIAID, vRtrIfDHCP6PfxdPrefLifetime, vRtrIfDHCP6PfxdValidLifetime, vRtrIfDHCP6PfxDelegationLstChgd } STATUS current DESCRIPTION "The group of objects supporting management of Ipv6 IP capabilities for transport and virtual routers on version 5.0 Alcatel 7x50 SR series systems." ::= { tmnxVRtrGroups 24 } tmnxVRtrIfV5v0Group OBJECT-GROUP OBJECTS { vRtrIfTotalNumber, vRtrIfRowStatus, vRtrIfType, vRtrIfName, vRtrIfPortID, vRtrIfEncapValue, vRtrIfAdminState, vRtrIfOperState, vRtrIfAlias, vRtrIfPhysicalAddress, vRtrIfArpTimeout, vRtrIfIcmpMaskReply, vRtrIfIcmpRedirects, vRtrIfIcmpNumRedirects, vRtrIfIcmpRedirectsTime, vRtrIfIcmpUnreachables, vRtrIfIcmpNumUnreachables, vRtrIfIcmpUnreachablesTime, vRtrIfIcmpTtlExpired, vRtrIfIcmpNumTtlExpired, vRtrIfIcmpTtlExpiredTime, vRtrIfNtpBroadcast, vRtrIfUnnumbered, vRtrIfMtu, vRtrIfQosPolicyId, vRtrIfIngressFilterId, vRtrIfEgressFilterId, vRtrIfDirectedBroadcast, vRtrIfMplsStatus, vRtrIfUnnumberedIf, vRtrIfCflowd, vRtrIfVPNClass, vRtrIfDescription, vRtrIfProtocol, vRtrIfTosMarkingTrusted, vRtrIfServiceId, vRtrIfArpPopulate, vRtrIfLastOperStateChange, vRtrIfOperMtu, vRtrIfGlobalIndex, vRtrIfProxyArp, vRtrIfProxyArpLocal, vRtrIfProxyArpPolicy1, vRtrIfProxyArpPolicy2, vRtrIfProxyArpPolicy3, vRtrIfProxyArpPolicy4, vRtrIfProxyArpPolicy5, vRtrIfNameIndex, vRtrIfDHCPRelayInfoAction, vRtrIfDHCPRelayCircuitId, vRtrIfDHCPRelayRemoteId, vRtrIfDHCPRelayServer1, vRtrIfDHCPRelayServer2, vRtrIfDHCPRelayServer3, vRtrIfDHCPRelayServer4, vRtrIfDHCPRelayServer5, vRtrIfDHCPRelayServer6, vRtrIfDHCPRelayServer7, vRtrIfDHCPRelayServer8, vRtrIfDHCPRelayTrusted, vRtrIfDHCPAdminState, vRtrIfDHCPDescription, vRtrIfDHCPRelayRxPkts, vRtrIfDHCPRelayTxPkts, vRtrIfDHCPRelayRxMalformedPkts, vRtrIfDHCPRelayRxUntrustedPkts, vRtrIfDHCPRelayClientPktsDiscarded, vRtrIfDHCPRelayClientPktsRelayed, vRtrIfDHCPRelayServerPktsDiscarded, vRtrIfDHCPRelayServerPktsRelayed, vRtrIfDHCPRelayClientPktsSnooped, vRtrIfDHCPRelayServerPktsSnooped, vRtrIfDHCPRelayClientPktsProxRad, vRtrIfDHCPRelayClientPktsProxLS, vRtrIfDHCPRelayPktsGenRelease, vRtrIfDHCPRelayPktsGenForceRenew, vRtrIfDHCPLeasePopulate, vRtrIfDHCPOperLeasePopulate, vRtrIfDHCPGiAddressType, vRtrIfDHCPGiAddress, vRtrIfDHCPGiAddressAsSrc, vRtrIfDHCPMatchOption82, vRtrIfDHCPRelayRemoteIdStr, vRtrIfDHCPProxyAdminState, vRtrIfDHCPProxyServerAddr, vRtrIfDHCPProxyLeaseTime, vRtrIfDHCPProxyLTRadiusOverride, vRtrIfDHCPVendorIncludeOptions, vRtrIfDHCPVendorOptionString, vRtrIfGlobalIndexvRtrID, vRtrIfGlobalIndexvRtrIfIndex, vRtrIfDelaySeconds, vRtrIfDelayUpTimer, vRtrIfInitDelayEnable } STATUS current DESCRIPTION "The group of objects supporting management of virtual interfaces on version 5.0 Alcatel 7x50 SR series systems." ::= { tmnxVRtrGroups 25 } tmnxVRtrIpV5v0Group OBJECT-GROUP OBJECTS { vRiaRowStatus, vRiaIpAddress, vRiaNetMask, vRiaBcastAddrFormat, vRiaReasmMaxSize, vRiaIgpInhibit, vRiaInetAddressType, vRiaInetAddress, vRiaInetPrefixLen, vRiaInetAddrState, vRiaInetEui64, vRiaInetOperAddress, vRiaInetGwAddressType, vRiaInetGwAddress, vRiaInetRemoteIpType, vRiaInetRemoteIp, vRtrIpCidrRouteLastEnabledTime, vRtrIpCidrRoutePreference, vRtrIpCidrRouteMetric, vRtrStaticRouteDest, vRtrStaticRouteMask, vRtrStaticRouteIndex, vRtrStaticRouteNumber, vRtrStaticRouteRowStatus, vRtrStaticRouteLastEnabledTime, vRtrStaticRouteStatus, vRtrStaticRouteStaticType, vRtrStaticRoutePreference, vRtrStaticRouteMetric, vRtrStaticRouteEgressIfIndex, vRtrStaticRouteNextHop, vRtrStaticRouteNextHopUnnumberedIf, vRtrStaticRouteAdminState, vRtrStaticRouteIgpShortcut, vRtrStaticRouteDisallowIgp, vRtrStaticRouteTag, vRtrStaticRouteIndexDest, vRtrStaticRouteIndexMask, vRtrStaticRouteAvailableIndex, vRtrInetStaticRouteRowStatus, vRtrInetStaticRouteLastEnabledTime, vRtrInetStaticRouteStatus, vRtrInetStaticRouteStaticType, vRtrInetStaticRoutePreference, vRtrInetStaticRouteMetric, vRtrInetStaticRouteEgressIfIndex, vRtrInetStaticRouteNextHopType, vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf, vRtrInetStaticRouteAdminState, vRtrInetStaticRouteIgpShortcut, vRtrInetStaticRouteDisallowIgp, vRtrInetStaticRouteTag, vRtrInetStaticRouteEnableBfd, vRtrInetStaticRouteAvailIndex, vRtrSvcIpRangeRowStatus, vRtrSvcIpRangeExclusive, vRtrIpNetToMediaTimer, vRtrIpNetToMediaOperState, vRtrInstanceAggregationTableLastChanged, vRtrAggregationRowStatus, vRtrAggregationLastChanged, vRtrAggregationSummaryOnly, vRtrAggregationASSet, vRtrAggregationAggregatorAS, vRtrAggregationAggregatorIPAddr, vRtrAggregationOperState, vRtrTunnelMetric, vRtrTunnelAge, vRtrAdvPrefixOnLinkFlag, vRtrAdvPrefixAutonomousFlag, vRtrAdvPrefixPreferredLifetime, vRtrAdvPrefixValidLifetime, vRtrAdvPrefixRowStatus, vRtrInetInstAggrTblLastChged, vRtrInetAggrRowStatus, vRtrInetAggrLastChanged, vRtrInetAggrSummaryOnly, vRtrInetAggrASSet, vRtrInetAggrAggregatorAS, vRtrInetAggrAggregatorIPAddr, vRtrInetAggrOperState, vRtrInetSvcIpRangeRowStatus, -- ALCATEL CHANG -- vRtrInetSvcIpRangeExclusive, vRtrInetSvcIpRangeExclusive -- ALCATEL CHANGE -- ALCATEL CHANGE -- vRtrIpNetToPhysicalTimer, -- vRtrIpNetToPhysicalOperState, -- vRtrIpNetToPhysicalIsRouter, -- vRtrIpNetToPhysicalMTU, -- vRtrIpNetToPhysicalPort, -- vRtrIpNetToPhysicalEncap, -- vRtrInetCidrRouteLastEnabledTime, -- vRtrInetCidrRoutePreference, -- vRtrInetCidrRouteMetric, -- vRtrInetCidrRouteIfVRtrId -- ALCATEL CHANG } STATUS current DESCRIPTION "The group of objects supporting management of IP capabilities for transport and virtual routers on version 4.0 Alcatel 7x50 SR series systems." ::= { tmnxVRtrGroups 26 } tmnxVRtrV5v0Group OBJECT-GROUP OBJECTS { vRtrRowStatus, vRtrAdminState, vRtrName, vRtrMaxNumRoutes, vRtrBgpStatus, vRtrMplsStatus, vRtrRipStatus, vRtrRsvpStatus, vRtrEcmpMaxRoutes, vRtrAS, vRtrNewIfIndex, vRtrLdpStatus, vRtrIsIsStatus, vRtrRouterId, vRtrTriggeredPolicy, vRtrConfederationAS, vRtrRouteDistinguisher, vRtrMidRouteThreshold, vRtrHighRouteThreshold, vRtrIllegalLabelThreshold, vRtrVpnId, vRtrDescription, vRtrGracefulRestart, vRtrGracefulRestartType, vRtrType, vRtrServiceId, vRtrCustId, vRtrIgmpStatus, vRtrMaxNumRoutesLogOnly, vRtrVrfTarget, vRtrVrfExportTarget, vRtrVrfImportTarget, vRtrPimStatus, vRtrMaxMcastNumRoutes, vRtrMaxMcastNumRoutesLogOnly, vRtrMcastMidRouteThreshold, vRtrIgnoreIcmpRedirect, vRtrMsdpStatus, vRtrVprnType, vRtrSecondaryVrfId, vRtrMldStatus, vRtrImportPolicy1, vRtrImportPolicy2, vRtrImportPolicy3, vRtrImportPolicy4, vRtrImportPolicy5, vRtrExportPolicy1, vRtrExportPolicy2, vRtrExportPolicy3, vRtrExportPolicy4, vRtrExportPolicy5, vRtrOperState, vRtrDirectRoutes, vRtrDirectActiveRoutes, vRtrStaticRoutes, vRtrStaticActiveRoutes, vRtrOSPFRoutes, vRtrOSPFActiveRoutes, vRtrBGPRoutes, vRtrBGPActiveRoutes, vRtrISISRoutes, vRtrISISActiveRoutes, vRtrRIPRoutes, vRtrRIPActiveRoutes, vRtrAggregateRoutes, vRtrAggregateActiveRoutes, vRtrStatConfiguredIfs, vRtrStatActiveIfs, vRtrStatIllegalLabels, vRtrStatCurrNumRoutes, vRtrStatBGPVpnRoutes, vRtrStatBGPVpnActiveRoutes, vRtrStatTotalLdpTunnels, vRtrStatTotalSdpTunnels, vRtrStatActiveLdpTunnels, vRtrStatActiveSdpTunnels, vRtrMulticastRoutes, vRtrStatActiveARPEntries, vRtrStatTotalARPEntries, vRtrSubMgmtRoutes, vRtrSubMgmtActiveRoutes, vRtrStatTotalRsvpTunnels, vRtrStatActiveRsvpTunnels, vRtrV6StatTotalRsvpTunnels, vRtrV6StatActiveRsvpTunnels, vRtrDHCP6DropStatLastCleared, vRtrDHCP6DropStatPktsDropped, vRtrDHCP6MsgStatsLstClrd, vRtrDHCP6MsgStatsRcvd, vRtrDHCP6MsgStatsSent, vRtrDHCP6MsgStatsDropped } STATUS obsolete DESCRIPTION "The group of objects supporting management of transport and virtual routers on version 5.0 Alcatel 7x50 SR series systems." ::= { tmnxVRtrGroups 27 } tmnxVRtrNotificationV5v0Group NOTIFICATION-GROUP NOTIFICATIONS { tmnxVRtrMidRouteTCA, tmnxVRtrHighRouteTCA, tmnxVRtrHighRouteCleared, tmnxVRtrIllegalLabelTCA, tmnxVRtrMcastMidRouteTCA, tmnxVRtrMcastMaxRoutesTCA, tmnxVRtrMcastMaxRoutesCleared, tmnxVRtrMaxArpEntriesTCA, tmnxVRtrMaxArpEntriesCleared, tmnxVRtrMaxRoutes, tmnxVRtrDHCPSuspiciousPcktRcvd, tmnxVRtrBfdSessionDown, tmnxVRtrBfdMaxSessionOnSlot, tmnxVRtrBfdPortTypeNotSupported, tmnxVRtrDHCPIfLseStatesExceeded, tmnxVRtrDHCP6RelayLseStExceeded, tmnxVRtrDHCP6ServerLseStExceeded, tmnxVRtrDHCP6LseStateOverride, tmnxVRtrDHCP6RelayReplyStripUni, tmnxVRtrDHCP6IllegalClientAddr, tmnxVRtrDHCP6AssignedIllegSubnet, tmnxVRtrDHCP6ClientMacUnresolved, tmnxVRtrBfdSessionUp } STATUS obsolete DESCRIPTION "The group of notifications supporting the transport and virtual router capabilities on version 5.0 Alcatel 7xx0 SR series systems." ::= { tmnxVRtrGroups 28 } tmnxVRtrObsoleteV5v0Group OBJECT-GROUP OBJECTS { vRtrOspfStatus, vRtrOspfv3Status, vRtrIfChannelID } STATUS current DESCRIPTION "The group of objects in ALCATEL-IND1-TIMETRA-VRTR-MIB which are obsoleted in Alcatel 7x50 SR 5.0 series systems." ::= { tmnxVRtrGroups 29 } tmnxVRtrNotificationObjV5v0Group OBJECT-GROUP OBJECTS { vRtrID, vRtrIfIndex, vRtrDhcpPacketProblem, vRtrBfdSlotNumber, vRtrNumberOfBfdSessionsOnSlot, vRtrBfdMaxSessionReason, vRtrDHCP6ServerNetAddrType, vRtrDHCP6ServerNetAddr, vRtrDHCP6ClientNetAddrType, vRtrDHCP6ClientNetAddr, vRtrDHCP6AssignedNetAddrType, vRtrDHCP6AssignedNetAddr, vRtrDHCP6AssignedPrefixLen, vRtrDHCP6OldAssignedNetAddrType, vRtrDHCP6OldAssignedNetAddr, vRtrDHCP6OldAssignedPrefixLen, vRtrDHCP6NewClientId, vRtrDHCP6OldClientId, vRtrDHCP6LeaseOverrideResult } STATUS obsolete DESCRIPTION "The group of objects supporting management of notification objects on Alcatel 7x50 SR 5.0 series systems." ::= { tmnxVRtrGroups 30 } tmnxVRtrIfDhcpServerGroup OBJECT-GROUP OBJECTS { vRtrIfLocalDhcpServerName } STATUS current DESCRIPTION "The group of objects supporting the DHCP server capabilities on version 6.0 Alcatel 7x50 SR series systems." ::= { tmnxVRtrGroups 31 } tmnxVRtrV6v0Group OBJECT-GROUP OBJECTS { vRtrRowStatus, vRtrAdminState, vRtrName, vRtrMaxNumRoutes, vRtrBgpStatus, vRtrMplsStatus, vRtrRipStatus, vRtrRsvpStatus, vRtrEcmpMaxRoutes, vRtrAS, vRtrNewIfIndex, vRtrLdpStatus, vRtrIsIsStatus, vRtrRouterId, vRtrTriggeredPolicy, vRtrConfederationAS, vRtrRouteDistinguisher, vRtrMidRouteThreshold, vRtrHighRouteThreshold, vRtrIllegalLabelThreshold, vRtrVpnId, vRtrDescription, vRtrGracefulRestart, vRtrGracefulRestartType, vRtrType, vRtrServiceId, vRtrCustId, vRtrIgmpStatus, vRtrMaxNumRoutesLogOnly, vRtrVrfTarget, vRtrVrfExportTarget, vRtrVrfImportTarget, vRtrPimStatus, vRtrMaxMcastNumRoutes, vRtrMaxMcastNumRoutesLogOnly, vRtrMcastMidRouteThreshold, vRtrIgnoreIcmpRedirect, vRtrMsdpStatus, vRtrVprnType, vRtrSecondaryVrfId, vRtrMldStatus, vRtrIPv6MaxNumRoutes, vRtrIPv6MidRouteThreshold, vRtrIPv6HighRouteThreshold, vRtrIPv6MaxNumRoutesLogOnly, vRtrIPv6IgnoreIcmpRedirect, vRtrMcPathMgmtPlcyName, vRtrImportPolicy1, vRtrImportPolicy2, vRtrImportPolicy3, vRtrImportPolicy4, vRtrImportPolicy5, vRtrExportPolicy1, vRtrExportPolicy2, vRtrExportPolicy3, vRtrExportPolicy4, vRtrExportPolicy5, vRtrOperState, vRtrDirectRoutes, vRtrDirectActiveRoutes, vRtrStaticRoutes, vRtrStaticActiveRoutes, vRtrOSPFRoutes, vRtrOSPFActiveRoutes, vRtrBGPRoutes, vRtrBGPActiveRoutes, vRtrISISRoutes, vRtrISISActiveRoutes, vRtrRIPRoutes, vRtrRIPActiveRoutes, vRtrAggregateRoutes, vRtrAggregateActiveRoutes, vRtrStatConfiguredIfs, vRtrStatActiveIfs, vRtrStatIllegalLabels, vRtrStatCurrNumRoutes, vRtrStatBGPVpnRoutes, vRtrStatBGPVpnActiveRoutes, vRtrStatTotalLdpTunnels, vRtrStatTotalSdpTunnels, vRtrStatActiveLdpTunnels, vRtrStatActiveSdpTunnels, vRtrMulticastRoutes, vRtrStatActiveARPEntries, vRtrStatTotalARPEntries, vRtrSubMgmtRoutes, vRtrSubMgmtActiveRoutes, vRtrStatTotalRsvpTunnels, vRtrStatActiveRsvpTunnels, vRtrV6StatTotalRsvpTunnels, vRtrV6StatActiveRsvpTunnels, vRtrHostRoutes, vRtrHostActiveRoutes, vRtrV6HostRoutes, vRtrV6HostActiveRoutes, vRtrStatLocalARPEntries, vRtrStatStaticARPEntries, vRtrStatDynamicARPEntries, vRtrStatManagedARPEntries, vRtrStatInternalARPEntries, vRtrDHCP6DropStatLastCleared, vRtrDHCP6DropStatPktsDropped, vRtrDHCP6MsgStatsLstClrd, vRtrDHCP6MsgStatsRcvd, vRtrDHCP6MsgStatsSent, vRtrDHCP6MsgStatsDropped, vRtrManagedRoutes, vRtrManagedActiveRoutes } STATUS current DESCRIPTION "The group of objects supporting management of transport and virtual routers on version 6.0 Alcatel 7x50 SR series systems." ::= { tmnxVRtrGroups 32 } tmnxVRtrStaticRteCPEChkV6v0Group OBJECT-GROUP OBJECTS { vRtrInetStaticRouteCpeAddrType, vRtrInetStaticRouteCpeAddr, vRtrInetStaticRouteCpeInterval, vRtrInetStaticRouteCpeDropCnt, vRtrInetStaticRouteCpeEnableLog, vRtrInetStatRteCpeChkUpTime, vRtrInetStatRteCpeChkInPktCnt, vRtrInetStatRteCpeChkOutPktCnt, vRtrInetStatRteCpeChkUpTrans, vRtrInetStatRteCpeChkDownTrans, vRtrInetStatRteCpeChkTTL } STATUS current DESCRIPTION "The group of objects supporting the Static Route CPE Check capability on version 6.0 Alcatel 7x50 SR series systems." ::= { tmnxVRtrGroups 33 } tmnxVRtrIfIpcpV6v0Group OBJECT-GROUP OBJECTS { vRtrIfIpcpPeerAddrType, vRtrIfIpcpPeerAddr, vRtrIfIpcpPriDnsAddrType, vRtrIfIpcpPriDnsAddr, vRtrIfIpcpSecDnsAddrType, vRtrIfIpcpSecDnsAddr } STATUS current DESCRIPTION "The group of objects supporting management of IPCP extensions for virtual interfaces on version 6.0 Alcatel 7x50 SR series systems" ::= { tmnxVRtrGroups 34 } tmnxVRtrIfCpmProtectGroup OBJECT-GROUP OBJECTS { vRtrIfCpmProtPolicyId, vRtrIfCpmProtUncfgdProtoDropCnt } STATUS current DESCRIPTION "The group of objects supporting management of CPM Protection for virtual interfaces on Alcatel 7xxx series systems." ::= { tmnxVRtrGroups 35 } tmnxDscpAppV6v0Group OBJECT-GROUP OBJECTS { tmnxDscpAppLastChanged, tmnxDscpAppDscpValue, tmnxDscpFCLastChanged, tmnxDscpFCValue, tmnxDscpAppTableLastChanged, tmnxDscpFCTableLastChanged, tmnxDot1pAppTableLastChanged, tmnxDot1pAppLastChanged, tmnxDot1pAppValue } STATUS current DESCRIPTION "The group of objects supporting management of DSCP marking for self-generated protocol control traffic on Alcatel 7x50 SR series systems release 6.0." ::= { tmnxVRtrGroups 36 } tmnxVRtrIfDHCPRelayGroup OBJECT-GROUP OBJECTS { vRtrIfDHCPRelayInfoAction, vRtrIfDHCPRelayCircuitId, vRtrIfDHCPRelayRemoteId, vRtrIfDHCPRelayServer1, vRtrIfDHCPRelayServer2, vRtrIfDHCPRelayServer3, vRtrIfDHCPRelayServer4, vRtrIfDHCPRelayServer5, vRtrIfDHCPRelayServer6, vRtrIfDHCPRelayServer7, vRtrIfDHCPRelayServer8, vRtrIfDHCPRelayTrusted, vRtrIfDHCPAdminState, vRtrIfDHCPDescription, vRtrIfDHCPRelayRxPkts, vRtrIfDHCPRelayTxPkts, vRtrIfDHCPRelayRxMalformedPkts, vRtrIfDHCPRelayRxUntrustedPkts, vRtrIfDHCPRelayClientPktsDiscarded, vRtrIfDHCPRelayClientPktsRelayed, vRtrIfDHCPRelayServerPktsDiscarded, vRtrIfDHCPRelayServerPktsRelayed, vRtrIfDHCPRelayClientPktsSnooped, vRtrIfDHCPRelayServerPktsSnooped, vRtrIfDHCPRelayClientPktsProxRad, vRtrIfDHCPRelayClientPktsProxLS, vRtrIfDHCPRelayPktsGenRelease, vRtrIfDHCPRelayPktsGenForceRenew, vRtrIfDHCPLeasePopulate, vRtrIfDHCPOperLeasePopulate, vRtrIfDHCPGiAddressType, vRtrIfDHCPGiAddress, vRtrIfDHCPGiAddressAsSrc, vRtrIfDHCPMatchOption82, vRtrIfDHCPRelayRemoteIdStr, vRtrIfDHCPProxyAdminState, vRtrIfDHCPProxyServerAddr, vRtrIfDHCPProxyLeaseTime, vRtrIfDHCPProxyLTRadiusOverride, vRtrIfDHCPVendorIncludeOptions, vRtrIfDHCPVendorOptionString, vRtrIfDHCPLayer2Header, vRtrIfDHCPAntiSpoofMacAddr, vRtrIfDHCPClientApplications, vRtrIfLdpSyncTimer } STATUS current DESCRIPTION "The group of objects supporting management of DHCP Relay on virtual interfaces on version 6.0 Alcatel 7x50 SR series systems" ::= { tmnxVRtrGroups 37 } tmnxVRtrGlobalV6v0Group OBJECT-GROUP OBJECTS { vRtrNextVRtrID, vRtrConfiguredVRtrs, vRtrActiveVRtrs, vRtrRouteThresholdSoakTime, vRtrMaxARPEntries, vRtrIPv6RouteThresholdSoakTime } STATUS current DESCRIPTION "The group of objects supporting management of general capabilities for transport and virtual routers on version 6.0 Alcatel 7x50 SR series systems." ::= { tmnxVRtrGroups 38 } tmnxVRtrNotificationObjV6v0Group OBJECT-GROUP OBJECTS { vRtrID, vRtrIfIndex, vRtrDhcpPacketProblem, vRtrBfdSlotNumber, vRtrNumberOfBfdSessionsOnSlot, vRtrBfdMaxSessionReason, vRtrDHCP6ServerNetAddrType, vRtrDHCP6ServerNetAddr, vRtrDHCP6ClientNetAddrType, vRtrDHCP6ClientNetAddr, vRtrDHCP6AssignedNetAddrType, vRtrDHCP6AssignedNetAddr, vRtrDHCP6AssignedPrefixLen, vRtrDHCP6OldAssignedNetAddrType, vRtrDHCP6OldAssignedNetAddr, vRtrDHCP6OldAssignedPrefixLen, vRtrDHCP6NewClientId, vRtrDHCP6OldClientId, vRtrDHCP6LeaseOverrideResult, vRtrInetStatRteCpeNotifyAddrType, vRtrInetStatRteCpeNotifyAddr, vRtrInetStaticRouteCpeStatus, vRtrManagedRouteInetAddrType, vRtrManagedRouteInetAddr, vRtrManagedRoutePrefixLen, vRtrFailureDescription } STATUS current DESCRIPTION "The group of objects supporting management of notification objects on Alcatel 7x50 SR 6.0 series systems." ::= { tmnxVRtrGroups 39 } tmnxVRtrNotificationV6v0Group NOTIFICATION-GROUP NOTIFICATIONS { tmnxVRtrMidRouteTCA, tmnxVRtrHighRouteTCA, tmnxVRtrHighRouteCleared, tmnxVRtrIllegalLabelTCA, tmnxVRtrMcastMidRouteTCA, tmnxVRtrMcastMaxRoutesTCA, tmnxVRtrMcastMaxRoutesCleared, tmnxVRtrMaxArpEntriesTCA, tmnxVRtrMaxArpEntriesCleared, tmnxVRtrMaxRoutes, tmnxVRtrDHCPSuspiciousPcktRcvd, tmnxVRtrBfdSessionDown, tmnxVRtrBfdMaxSessionOnSlot, tmnxVRtrBfdPortTypeNotSupported, tmnxVRtrDHCPIfLseStatesExceeded, tmnxVRtrDHCP6RelayLseStExceeded, tmnxVRtrDHCP6ServerLseStExceeded, tmnxVRtrDHCP6LseStateOverride, tmnxVRtrDHCP6RelayReplyStripUni, tmnxVRtrDHCP6IllegalClientAddr, tmnxVRtrDHCP6AssignedIllegSubnet, tmnxVRtrDHCP6ClientMacUnresolved, tmnxVRtrBfdSessionUp, tmnxVRtrIPv6MidRouteTCA, tmnxVRtrIPv6HighRouteTCA, tmnxVRtrIPv6HighRouteCleared, tmnxVRtrStaticRouteCPEStatus, tmnxVRtrBfdSessionDeleted, tmnxVRtrBfdSessionProtChange, tmnxVRtrManagedRouteAddFailed } STATUS current DESCRIPTION "The group of notifications supporting the transport and virtual router capabilities on version 6.0 Alcatel 7xx0 SR series systems." ::= { tmnxVRtrGroups 40 } tmnxVRtrBfdV6v0Group OBJECT-GROUP OBJECTS { vRtrIfBfdAdminState, vRtrIfBfdTransmitInterval, vRtrIfBfdReceiveInterval, vRtrIfBfdMultiplier, vRtrIfBfdSessionOperState, vRtrIfBfdSessionState, vRtrIfBfdSessionOperFlags, vRtrIfBfdSessionMesgRecv, vRtrIfBfdSessionMesgSent, vRtrIfBfdSessionLastDownTime, vRtrIfBfdSessionLastUpTime, vRtrIfBfdSessionUpCount, vRtrIfBfdSessionDownCount, vRtrIfBfdSessionLclDisc, vRtrIfBfdSessionRemDisc, vRtrIfBfdSessionProtocols, vRtrIfBfdSessionTxInterval, vRtrIfBfdSessionRxInterval, vRtrIfBfdEchoInterval, vRtrIfBfdSessionType } STATUS current DESCRIPTION "The group of objects supporting Bi-directional Forwarding Detection on version 6.0 Alcatel 7xxx series systems." ::= { tmnxVRtrGroups 41 } END