-- -- file : RV.mib -- RAD-MIB DEFINITIONS ::= BEGIN -- -- Copyright 1993 RAD Data Communications, Ltd. -- All Rights Reserved. -- It is RAD's intent to encourage the widespread use of -- this Specification in connection with the management of -- RAD products. RAD grants vendors, end-users, -- and other interested parties a non-exclusive license to -- use this Specification in connection with the management -- of RAD products. -- This Specification is supplied "as is," and RAD makes -- no warranty, either express or implied, as to the use, -- operation, condition, or performance of the Specification. IMPORTS TimeTicks, enterprises, IpAddress, OBJECT-TYPE, Integer32, Counter32, Gauge32, OBJECT-IDENTITY, NOTIFICATION-TYPE, Unsigned32,Counter64 FROM SNMPv2-SMI RowStatus, TimeStamp, DisplayString, TruthValue,TEXTUAL-CONVENTION,RowPointer FROM SNMPv2-TC PerfCurrentCount, PerfIntervalCount, PerfTotalCount FROM PerfHist-TC-MIB ifAlias, ifIndex FROM IF-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB IANAifType FROM IANAifType-MIB InetAddressType,InetAddress FROM INET-ADDRESS-MIB; -- -- Some MIB compilers need those two lines: -- enterprises OBJECT IDENTIFIER ::= -- { iso org(3) dod(6) internet(1) private(4) 1 } MacAddress ::= OCTET STRING (SIZE(6)) rad OBJECT IDENTIFIER ::= { enterprises 164 } radGen OBJECT IDENTIFIER ::= { rad 6 } -- General information -- -- --Last update: 06-Jan-2008 by Smadar Tauber systems OBJECT IDENTIFIER ::= { radGen 1} -- list of RAD products --agnt OBJECT IDENTIFIER ::= { radGen 2} agent general tree --services OBJECT IDENTIFIER ::= { radGen 3} See services.txt agnt OBJECT IDENTIFIER ::= { radGen 2} -- agent general tree -- Agent General agnHwVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "ASCII string for description and display of the agent hardware version, as it is known by the agent software.The user can update the version upon request when he changes components in the agent's module " ::= { agnt 1 } agnTrapMask OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this attribute determines the type of traps the agent should mask and not send to the management console. The value is differently determined for different products. There are mainly two methods: - an integer number, specifying the traps' severity. - a sum of 2**n, where n is a bit assigned to a certain masked trap group. User should consult the product specification, to find out the method employed." ::= { agnt 2 } agnTrapValue OBJECT-TYPE SYNTAX OCTET STRING (SIZE (100)) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The value of the trap decoded in internal RAD format. Full description is given in the Trap definition file" ::= {agnt 3} agnChangeCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of changes in system configuration that were reported to the manager since last cold start" ::= {agnt 4 } agnSpecific OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION " Object identifier of entity containing additional information regarding this instance." ::= { agnt 5} agnConfigMsg OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) MAX-ACCESS read-only STATUS current DESCRIPTION "Full configuration message coded in internal RAD application format. This entry describes agent's configuration. For MP-2200 R3, this object describes agent's support of the V5.1 feature: 1 octet ; bit 0 (LSB). '1' - V5.1 feature is supported '0' - V5.1 feature is not supported." ::= { agnt 6 } -- Manager table to record all IP addresses mngTrapIpTable OBJECT-TYPE SYNTAX SEQUENCE OF MngEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table indicates the destination address of the traps. Internally it will be limited to ten addresses. " ::= { agnt 7 } mngEntry OBJECT-TYPE SYNTAX MngEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in table." INDEX { mngID } ::= { mngTrapIpTable 1 } MngEntry ::= SEQUENCE { mngID Integer32, mngIP IpAddress, mngIPMask IpAddress, mngTrapMask Integer32, mngAlarmTrapMask OCTET STRING, mngSnmpTrapUdpPort Unsigned32 } mngID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " This value indicates an index of a specific IP address" ::= { mngEntry 1 } mngIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the destination address of the traps. IP 0.0.0.0 removes the entry. " ::= { mngEntry 2 } mngIPMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This value indicates the mask of the destination addresses of the traps. " ::= { mngEntry 3 } mngTrapMask OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this attribute determines the type of traps the agent should mask and not send to this NMS. The value is differently determined for different products. There are mainly two methods: - an integer number, specifying the traps' severity. - a sum of 2**n, where n is a bit assigned to a certain masked trap group. User should consult the product specification, to find out the method employed." ::= { mngEntry 4 } mngAlarmTrapMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object determines the alarm traps that the agent should mask (not send to this manager). The value is an Octet String, where each bit is assigned to a certain trap. If the bit = 1, the trap will be masked. If the bit = 0, the trap will not be masked. For more details on the specific alarm traps masked, see product specification." ::= { mngEntry 5 } mngSnmpTrapUdpPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This variable enables to set the UDP port (socket) used for SNMP traps." ::= { mngEntry 6 } agnIndication OBJECT-TYPE SYNTAX INTEGER { faulty (1), -- =major warning (2), normal (3), -- off minor (4), major (5), event (6), critical(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Attribute describing the state of the entity the agent is responsible for. In case of a modular entity, the value of this attribute will be according to the component which is in the worst state. The order of severity (from top to bottom) is: critical-> major (or faulty)-> minor-> event-> warning-> normal (off)." ::= { agnt 8 } agnMonitorModeCmd OBJECT-TYPE SYNTAX INTEGER { notApplicable(1), off(2), on(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this attribute to ON, will enforce the agent to change its mode of operation to Monitor Mode" ::= {agnt 9} agnLed OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) MAX-ACCESS read-only STATUS current DESCRIPTION "This entry specifies the LEDs status of the agent module . Each led will be represented by 4 bits where the first 2 bits (left) will specify the status : (00=NA, 01=OFF, 10=ON, 11=BLINK), and the next two bits (right) will specify the color : (00=GREEN, 01=RED, 10=YELLOW, 11=GRAY)" ::= {agnt 10} trapTable OBJECT-TYPE SYNTAX SEQUENCE OF TrapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes the last few traps generated by the agent, for future retrieval. The table has a limited capacity. If traps are not retrieved in proper time, they will be over-written by new traps " ::= {agnt 11} trapEntry OBJECT-TYPE SYNTAX TrapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in table." INDEX { trapID } ::= { trapTable 1 } TrapEntry ::= SEQUENCE { trapID Integer32, trapVal DisplayString, trapTimeSinceOccurrence TimeTicks } trapID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " This value indicates an index of a specific trap " ::= { trapEntry 1 } trapVal OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This value is the actual ASCII description of the trap. " ::= { trapEntry 2 } trapTimeSinceOccurrence OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "This value indicates the amount of time passed since the occurrence of the event that trigger this trap. " ::= { trapEntry 3 } -- -- -- File Transfer -- -- fileTransfer OBJECT IDENTIFIER ::= { agnt 12 } fileServerIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the server from which the file is loaded " ::= { fileTransfer 1 } fileName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the file to be loaded. For protection, read returns NULL. " ::= { fileTransfer 2 } fileTransCmd OBJECT-TYPE SYNTAX INTEGER { swDwnLoad (1), configDwnLoad (2), configUpLoad (3), coProcDwnLoad (4), stateUpLoad (5), dwnLoadUserFile (6), upLoadUserFile (7), swDwnLoadAndReset (8), swUpLoad (9), swDwnLoad2BkupStorage(10), bootDwnLoad (11), bootUpLoad (12), swUpLoadFromBkupStorage(13), licenseDwnLoad (14), configDwnLoadToDefaultFile(15), noOp (255) } MAX-ACCESS read-write STATUS current DESCRIPTION "The command to be executed on fileName at fileServerIP." ::= { fileTransfer 3 } -- tftp group tftpRetryTimeOut OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " General Retransmission time-out value (seconds) " -- DEFVAL { 15 } ::= { fileTransfer 4 } tftpTotalTimeOut OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " Total Retransmission time-out value (seconds) " -- DEFVAL { 60 } ::= { fileTransfer 5 } tftpStatus OBJECT-TYPE SYNTAX INTEGER { noOp(2), connecting(3), transferringData(4), endedTimeOut(5), endedOk(6), error(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Status of tftp session. When a session ended with success, the tftpStatus should be endedOk(6). Before restarting a tftp session, the NMS should set the tftpStatus to noOp(2). That's the reason of MAX-ACCESS read-write to this field." DEFVAL { noOp} ::= { fileTransfer 6 } tftpError OBJECT-TYPE SYNTAX OCTET STRING ( SIZE(2) ) MAX-ACCESS read-only STATUS current DESCRIPTION " The MSB represents the standard error code. The LSB represents the private error code. 0x0000 is No Error 0x0100 is File Not Found 0x0200 is Access violation 0x0300 is Disk full or allocation exceeded 0x0400 is Illegal TFTP operation 0x0500 is Unknown transfer ID 0x0600 is File already exists 0x0700 is No such user 0x0001 is Server Overflow 0x0002 is No empty UDP port 0x0003 is No empty connection 0x0004 is Illegal File Mode 0x0007 is Illegal PDU size 0x0008 is TFTP Server does not exist 0x0009 is Incorrect File 0x000A is Wrong License format 0x000B is License ID already used " DEFVAL { '0000'h } ::= { fileTransfer 7 } fileTransferToSubSystems OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) MAX-ACCESS read-write STATUS current DESCRIPTION " This object represents the sub-systems the fileTransCmd refers to. It should be used when a system is divided to sub-systems and each sub-system (or part of them) can have a different SW/Configuration. Each bit of this object will represent one of the sub-systems. Bit='1' - APPLY to respective sub-system Bit='0' - DO NOT APPLY to respective sub-system For the meaning of each bit, see product's specification. User will select the sub-systems envolved by filling-in the bits that represent these sub-systems. In this case, the file represented by 'fileName' will include several parts, each representing one of the sub-systems. The agent will refer only to the part/s indicated by this object. 0 Octet Strings = not applicable DEFVAL = 0h for the products that support this object." ::= { fileTransfer 8 } fileNameWithinProduct OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The file name used by the product within the product file system." ::= { fileTransfer 9 } --Internal SW Download table intSwdlTable OBJECT-TYPE SYNTAX SEQUENCE OF IntSwdlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This parameters table is for internal Software down load. It also includes data about all files contained in the Object from which down-load is performed." ::= { fileTransfer 10 } intSwdlEntry OBJECT-TYPE SYNTAX IntSwdlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in table." INDEX {intSwdlObjIdx, intSwdlFileIdx } ::= { intSwdlTable 1} IntSwdlEntry ::= SEQUENCE { intSwdlObjIdx Integer32, intSwdlFileIdx Integer32, intSwdlFileName DisplayString, intSwdlFileSwVer DisplayString, intSwdlSwDate DisplayString, intSwdlSize DisplayString, intSwdlCmd INTEGER, intSwdlToSubSystem OCTET STRING, intSwdlCardType INTEGER, intSwdlFlashIdx Integer32 } intSwdlObjIdx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the object from which down-load is performed." ::= {intSwdlEntry 1} intSwdlFileIdx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the files included in intSwdlObjIdx. One of these files can be selected to be internally downloaded." ::= {intSwdlEntry 2} intSwdlFileName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the file." ::= {intSwdlEntry 3} intSwdlFileSwVer OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The software version of the file." ::= {intSwdlEntry 4} intSwdlSwDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The software version date of the file." ::= {intSwdlEntry 5} intSwdlSize OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the file." ::= {intSwdlEntry 6} intSwdlCmd OBJECT-TYPE SYNTAX INTEGER { notApplicable (1), off (2), on (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The command to down-load a SW file to an object. The Agent will change the value of this MIB object to off(2) automatically, after accepting the command." ::= {intSwdlEntry 7} intSwdlToSubSystem OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) MAX-ACCESS read-write STATUS current DESCRIPTION " This object defines the subsystem for download. Bit='1'- APPLY to respective sub system. Bit='0'- DO NOT APPLY to respective sub system. For more details see product specification. For every octet bit0=LSB, bit7=MSB" ::= { intSwdlEntry 8 } intSwdlCardType OBJECT-TYPE SYNTAX INTEGER { unknown (1), gstm1 (220), -- GMUX-2000 STM1 card goc3 (221), -- GMUX-2000 OC3 card gstm1D (222), -- GMUX-2000 STM1 card with 2 ports goc3D (223), -- GMUX-2000 OC3 card with 2 ports serverE1 (270), -- GMUX-2000 Server E1 Card serverT1 (271), -- GMUX-2000 Server T1 Card serverE1Pw (272), -- Gmux2000 Server E1 PW Card serverT1Pw (273), -- Gmux2000 Server T1 PW Card gigabitEth (280), -- GMUX-2000 Gigabit ETH Card channelizedT3Pw1 (290), -- Gmux2000 Channelized T3 PW Card cesT128 (300), -- Gmux-2000 CES T1 28 ports (external T1 ports) card. cesE128 (301), -- Gmux-2000 CES E1 28 ports (external E1 ports) card. cesT1Pw28 (302), -- Gmux2000 CES T1 PW ports (external T1 ports) card. cesE1Pw28 (303), -- Gmux2000 CES E1 PW ports (external E1 ports) card. vmxE1VeDe (310), -- Gmux-2000 Vmux E1 card with 16 external voice + 2 external Data ports. vmxE1VeDi (311), -- Gmux-2000 Vmux E1 card with 16 external voice + 2 internal Data ports. vmxE1ViDe (312), -- Gmux-2000 Vmux E1 card with 16 internal voice + 2 external Data ports. vmxE1ViDi (313), -- Gmux-2000 Vmux E1 card with 16 internal voice + 2 internal Data ports. vmxT1VeDe (314), -- Gmux-2000 Vmux T1 card with 16 external voice + 2 external Data ports. vmxT1VeDi (315), -- Gmux-2000 Vmux T1 card with 16 external voice + 2 internal Data ports. vmxT1ViDe (316), -- Gmux-2000 Vmux T1 card with 16 internal voice + 2 external Data ports. vmxT1ViDi (317), -- Gmux-2000 Vmux T1 card with 16 internal voice + 2 internal Data ports. vc12E1UeNe (318), -- Gmux-2000 Vmux E1 card with 12 external User (voice) + 2 external Network (Data) ports. vc12E1UeNi (319), -- Gmux-2000 Vmux E1 card with 12 external User (voice) + 2 internal Network (Data) ports. vc12E1UiNe (320), -- Gmux-2000 Vmux E1 card with 12 internal User (voice) + 2 external Network (Data) ports. vc12E1UiNi (321), -- Gmux-2000 Vmux E1 card with 12 internal User (voice) + 2 internal Network (Data) ports. vc12T1UeNe (322), -- Gmux-2000 Vmux T1 card with 12 external User (voice) + 2 external Network (Data) ports. vc12T1UeNi (323), -- Gmux-2000 Vmux T1 card with 12 external User (voice) + 2 internal Network (Data) ports. vc12T1UiNe (324), -- Gmux-2000 Vmux T1 card with 12 internal User (voice) + 2 external Network (Data) ports. vc12T1UiNi (325) -- Gmux-2000 Vmux T1 card with 12 internal User (voice) + 2 internal Network (Data) ports. } MAX-ACCESS read-only STATUS current DESCRIPTION "This object defines the Card type that this file is relevant for." ::= {intSwdlEntry 9} intSwdlFlashIdx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the flash memory this file is stored in (1 or 2) (Example: 1= The file is stored in flash No.1). ASMi52 file will always be stored in Flash No.2 (intSwdlFlashIdx=2)." ::= {intSwdlEntry 10} --SW Download Status table swdlStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF SwdlStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This parameters table is for software download status. It also includes data about the files down-loaded or attempted to be down-loaded." ::= { fileTransfer 11 } swdlStatusEntry OBJECT-TYPE SYNTAX SwdlStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in table." INDEX {swdlStatusTypeIdx, swdlStatusIdx } ::= { swdlStatusTable 1} SwdlStatusEntry ::= SEQUENCE { swdlStatusTypeIdx Integer32, swdlStatusIdx Integer32, swdlStatusFileName DisplayString, swdlStatusSlot DisplayString, swdlStatusSubSystem DisplayString, swdlStatusStatus Integer32, swdlStatusTime DisplayString } swdlStatusTypeIdx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the down-load type (e.g. external (1) or internal (2))." ::= {swdlStatusEntry 1} swdlStatusIdx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the status rows." ::= {swdlStatusEntry 2} swdlStatusFileName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the file." ::= {swdlStatusEntry 3} swdlStatusSlot OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The slot of the updated (or attempted to be updated) object." ::= {swdlStatusEntry 4} swdlStatusSubSystem OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The subsystem that updated (or attempted to be updated)." ::= {swdlStatusEntry 5} swdlStatusStatus OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the down load process. Value: Fail (2), OK (3), InProcess (4)." ::= {swdlStatusEntry 6} swdlStatusTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB parameter indicates the time SW download was finished. The format shuld be YYYY-MM-DD, hh:mm:ss" ::= {swdlStatusEntry 7} clearDwldStatusLog OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object clears the status log. Value: off(2), external(3), internal(4) The Agent will change the value of this MIB object to off(2) automatically, after accepting the command ." ::= { fileTransfer 12 } autoFileTransfer OBJECT IDENTIFIER ::= { fileTransfer 13} -- Agent initiated auto file transfer. autoFileTransferTable OBJECT-TYPE SYNTAX SEQUENCE OF AutoFileTransferEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Scheduling configuration table for Agent initiated file transfer." ::= { autoFileTransfer 1 } autoFileTransferEntry OBJECT-TYPE SYNTAX AutoFileTransferEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table." INDEX { autoFileTransferType} ::= { autoFileTransferTable 1} AutoFileTransferEntry ::= SEQUENCE { autoFileTransferType INTEGER, autoFileTransferServerIp IpAddress, autoFileTransferFileName SnmpAdminString, autoFileTransferScheduling INTEGER, autoFileTransferTimeRecurrence Integer32, autoFileTransferOccurrenceRecurrence Integer32 } autoFileTransferType OBJECT-TYPE SYNTAX INTEGER { alarmsBuffer (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object defines the type of file to be transferred by agent. " ::= { autoFileTransferEntry 1 } autoFileTransferServerIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the IP Address of the server to which the file is uploaded." ::= { autoFileTransferEntry 2 } autoFileTransferFileName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the name of the file to be uploaded." ::= { autoFileTransferEntry 3 } autoFileTransferScheduling OBJECT-TYPE SYNTAX INTEGER { notApplicable (1), now (2), recurrence (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines schedule for TFTP Automatic session(s) initiated by Agent, according to the value selected: now - initiate immediate single session. recurrence- initiate single session 'every M time units'. or 'every N occurrences' or upon both, (earliest event). Time reccurence period (M) is defined by fileTransferTimeRecurrence. Occurrence reccurence (N) is defined by fileTransferOccurrenceRecurrence. Zero value means that the object is not relevant (not taken into account for the recurrence). It is invalid that both will have zero values in our case (recurrence). When both are non zero, file is transferred upon earliest event" ::= { autoFileTransferEntry 4 } autoFileTransferTimeRecurrence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines time reccurence interval, e.g. M can be 'every M days', 'every M hours' etc. Zero is used to indicate there's no time reccurence (0= notApplicable). This object is taken into account only if autoFileTransferScheduling = recurrence For LA-110 time units are days." ::= { autoFileTransferEntry 5 } autoFileTransferOccurrenceRecurrence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines Occurrence reccurence interval, e.g N can be in 'every N alarms', 'every N log entries' etc. zero is used to indicate There's no Event Reccurence. (0= notApplicable) This object is taken into account only if autoFileTransferScheduling = recurrence Occurence Type (Alarms, etc.) is according to autoFileTransferType." ::= { autoFileTransferEntry 6 } fileTransferServerPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Server Port number used for File Transfer. Applicable for SFTP. Valid values: 0..65535." -- DEFVAL { 22 } ::= { fileTransfer 14 } fileTransferProtocol OBJECT-TYPE SYNTAX INTEGER { tftp (1), --default sftp (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "File Transfer protocol used." ::= { fileTransfer 15 } systemReset OBJECT-TYPE SYNTAX INTEGER { off (2), on (3), --HW resetConfig (4), resetMapping (5), resetStandby (6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset action to be performed on the system. - resetMapping - reset SDH/SONET mapping to default for all SDH/SONET links. - resetStandby(6) - can be used only by devices with redundancy on MAIN/CL." ::= { agnt 13 } systemTiming OBJECT IDENTIFIER ::= { agnt 14 } systemDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "System date." ::= { systemTiming 1 } systemTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "System time." ::= { systemTiming 2 } systemTimeElapsed OBJECT-TYPE SYNTAX Integer32 (0..899) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds that have elapsed since the beginning of the current error-measurement period. Same for all ports of the device." ::= { systemTiming 3 } systemResetAllStatsCmd OBJECT-TYPE SYNTAX INTEGER { off(2), on (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset statistics of all ports and connections of the device." ::= { agnt 16 } systemClearTablesCmd OBJECT-TYPE SYNTAX INTEGER { off(2), tempCnfgTables (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "tempCnfgTables - Set *RowStatus = destroy for all entries of some tables having *RowStatus object, for temporary configuration only! (255). For the relevant tables, see product's specification. This object should be used by WAN product applications before performing the Update operation, in order to clear old entries of these tables. For MP-104/204 the entries will be destroyed for cnfg=1. off - agent will automatically change to this value, after performing the command. " ::= { agnt 17 } systemParameter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter can be used for different purposes: - TELNET session time-out in seconds. - Ace20: when trying to create row in a table that already has row with the same values, if set of values has to be unique in table, this attribute is set to the index of the existing row. - Optimux-T3: when CH interfaces are RJ-45, user can select via this object, the interface type for each Group of channels: T1 or E1: The selection will be a sum of the following Bits. '0' = T1 '1' = E1 Bit Group Value for each Bit having '1' 1 1 (CH-1..CH-8) 1 2 2 (CH-9..CH-12) 2 3 3 (CH-13..CH-20) 4 4 4 (CH-21..CH-28) 8 Examples: 15 = all Groups are selected to be E1 6 = Group 2 and Group 3 are selected to be E1 (Group 1 and Group 4 are T1). - FCD-A, FCD-M: user can select via this object the configuration used for Get values of MSDSL parameters that don't have configuration index. 1 =active configuration 255=temporary configuration. Set of this object should be done before Getting the MSDSL RW parameters. - Ace2002: This parameter indicates the number of intervals that were successfully uploaded upon statistics collection session. - FCD-IP, WR, FCD-IPD, LA-240: This parameter indicates whether Telnet Access is enabled/disabled: Values: 2 - Telnet Access is Disabled. 3 - Telnet Access is Enabled. -Vmux-110: This parameter value equals to maximum number of bundles. -Optimux-155: Simmilar usage to Optimux T3. user can select via this object, interface type T1 or E1 for each Group of channels (LIU): LIU group consists of 7 channels. Up to 12 LIUs are represented (84 T1 Channels). The selection will be a sum of the 2**n For each bit:'0' = T1 ,'1' = E1 Bit Group 1 1 (CH-1 .. CH-7) 2 2 (CH-8 .. CH-14) 3 3 (CH-15 ..CH-21) ... 9 9 (CH-56.. CH-63) ... 10 10 (CH-64..CH-70) 11 11 (CH-71..CH-77) 12 12 (CH-78..CH-84) " ::= { agnt 18 } agnGlobalAlarmMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (100)) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this attribute determines the alarm traps the agent should mask and not send to the managers. Each bit from a certain octet represents a certain alarm." ::= { agnt 19 } alarmSeverity OBJECT-TYPE SYNTAX INTEGER { event (3), minor (4), major (5), warning (6), critical (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the severity of the alarms." ::= { agnt 20 } alarmState OBJECT-TYPE SYNTAX INTEGER { off (2), -- End, on (3) -- Start. } MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { agnt 21 } agnTestStatus OBJECT-TYPE SYNTAX INTEGER { off (2), on (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current test status (for all levels: system, card, port). This attribute will be set to: on(3): when there is at least one test in progress on the system/card/port off(2): when there is NO test in progress on the system/card/port" ::= {agnt 22 } systemSaveAndResetAllStatsCmd OBJECT-TYPE SYNTAX INTEGER { off(2), on (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "on - a command to Save data of Current Period in Last Period data-set and start a new counting period for Current Period. off - agent will automatically change to this value, after performing the command." ::= { agnt 23 } systemDefaultGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Default Gateway's IP Address." ::= { agnt 24 } agnSendTrapParameter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies if the agent will attach a specific parameter to a trap. For ACE2002 the agent will attach or not the openViewSeverity parameter according to the value of this parameter: 1 - will attach openViewSeverity. 0 - will not attach openViewSeverity." ::= { agnt 27 } agnDeviceCapabilities OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the optional capabilities that are implemented by this device and are manageable through this MIB. For each capability 1 BIT is allocated in each Octet starting from the LSB. If the value of the BIT = 1, the capability is Enabled. If the value of the BIT = 0, the capability is Disabled. For bit assignment, refer to device specification. Capabilities example: Router - BIT 0 (0000 0001 = 01 Hex = 1 Decimal). The 2nd octet (MSB) will represent the maximum number of intervals that the Agent can keep in its DB (same for all ports). For Vmux, this object describes agent's support of LBRAD coder feature: 1 octet ; bit 0 (LSB). '1' - LBRAD feature is supported '0' - LBRAD feature is not supported." ::= {agnt 42} agnStoreCmd OBJECT-TYPE SYNTAX INTEGER { off (2), inFlash (3), asDefConfigFile (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Store command. inFlash(3) = store the current Agent configuration in Flash memory. asDefConfigFile(4) = store the current Agent configuration as Default Configuration file (e.g. 'DefConfig.cfg'). Agent will perform the required command and change automatically the value of this object to off(2)." ::= { agnt 44 } agnSwVersionSwapCmd OBJECT-TYPE SYNTAX INTEGER { off (2), mainAndBackup (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "SW switch command. mainAndBackup (3) = Swap between Main SW and the backup one. Agent will perform the required command and change automatically the value of this object to off(2)." ::= { agnt 51 } agnTrapDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This variable enables the user to set a delay (in seconds) before a trap is sent. This delay will be used only for traps that need to be sent during device initialization. It is needed because the device connected to our device starts transmitting traps later. The delay starts from the end of the Boot process. The device will keep the init traps in the correct order, and cancel those which clear former ones in the list. After this init delay, traps will be sent without a delay." ::= { agnt 60 } -- SYSTEM TRAPS --NOTIFICATIONS systemsEvents OBJECT-IDENTITY STATUS current DESCRIPTION "The events for RAD products." ::= { systems 0 } tftpStatusChangeTrap NOTIFICATION-TYPE OBJECTS { tftpStatus } STATUS current DESCRIPTION "This trap is sent whenever the status of tftp changed." ::= { systemsEvents 1 } agnStatusChangeTrap NOTIFICATION-TYPE OBJECTS {agnIndication } STATUS current DESCRIPTION "This trap is sent whenever the state of the entity the agent is responsible for changed. TDM devices will send agnTestStatus variable to indicate the current test status." ::= { systemsEvents 2 } swdlStatusResult NOTIFICATION-TYPE OBJECTS {swdlStatusFileName} STATUS current DESCRIPTION "This notification is sent when Software Down Load is finished. The attached object indicates the File Name." ::= { systemsEvents 4 } intSwdlSlotFileMismatch NOTIFICATION-TYPE OBJECTS {intSwdlFileName} STATUS current DESCRIPTION "This notification is sent when the card in the chosen slot doesn't match the chosen file. The attached object indicates the File Name." ::= { systemsEvents 5 } END