-- ***************************************************************** -- SiteLight EDFA MIB -- ***************************************************************** SL-EDFA-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, TimeTicks FROM SNMPv2-SMI DisplayString, TruthValue, TimeStamp FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF InterfaceIndex FROM IF-MIB PerfCurrentCount, PerfIntervalCount, PerfTotalCount FROM PerfHist-TC-MIB sitelight FROM SL-NE-MIB; slEdfa MODULE-IDENTITY LAST-UPDATED "200202040000Z" ORGANIZATION "PacketLight Networks Ltd." CONTACT-INFO "Omri_Viner@PacketLight.com" DESCRIPTION "This MIB module describes the EDFA Cards" ::= { sitelight 9 } -- The EDFA MIB consists of the following groups: -- EDFA Configuration Table -- EDFA Traps edfaConfig OBJECT IDENTIFIER ::= { slEdfa 1 } edfaTraps OBJECT IDENTIFIER ::= { slEdfa 2 } edfaTraps0 OBJECT IDENTIFIER ::= { edfaTraps 0 } -- ---------------------------------------------------- -- -- The Edfa Configuration Table -- -- ---------------------------------------------------- edfaConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF EdfaConfigEntry MAX-ACCESS not-accessible STATUS current -- deprecated DESCRIPTION "The EDFA configuration table." ::= { edfaConfig 1 } edfaConfigEntry OBJECT-TYPE SYNTAX EdfaConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the EDFA interface configuration table. The index to this table is the same as the an ifIndex." INDEX { edfaIfIndex } ::= { edfaConfigTable 1 } EdfaConfigEntry ::= SEQUENCE { edfaIfIndex InterfaceIndex, edfaPumpTemp Integer32, edfaRxPower INTEGER, edfaPumpAdminStatus INTEGER, edfaPumpOperStatus INTEGER, edfaStatus INTEGER, edfaVoa INTEGER, edfaAutomaticMode TruthValue, edfaAdminControlMode INTEGER, edfaOperControlMode INTEGER, edfaAdminGain INTEGER, edfaOperGain INTEGER, edfaAdminOutputPower INTEGER, edfaOperOutputPower INTEGER, edfaChannelsNumber INTEGER, edfaTotalChannelsNumber INTEGER, edfaEyeSafetyMode TruthValue, edfaShutDownLipEnable TruthValue, edfaAutoPowerUpLipEnable TruthValue, edfaMaxGain INTEGER, -- Gain In Range from-to edfaGainInFrom INTEGER, edfaGainInTo INTEGER, -- Gain Out Range from-to edfaGainOutFrom INTEGER, edfaGainOutTo INTEGER, -- Power In Range from-to edfaPowerInFrom INTEGER, edfaPowerInTo INTEGER, -- Power Out Range from-to edfaPowerOutFrom INTEGER, edfaPowerOutTo INTEGER, -- Channel information edfaFromChannel INTEGER, edfaToChannel INTEGER, edfaOscChannel INTEGER, edfaRedBlueType INTEGER, edfaRole INTEGER, -- A description string edfaFreeDescription DisplayString, edfaConfigSafetyThreshold INTEGER } edfaIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The amplifier interface index." ::= { edfaConfigEntry 1 } edfaPumpTemp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The pump temperture (in Kelvin)." ::= { edfaConfigEntry 2 } edfaRxPower OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The measured Rx Power. The value is specified in ten'th of Dbm units increments, starting from -30.0 dbm (e.g. value 0 means -30.0 dbm)." ::= { edfaConfigEntry 3 } edfaPumpAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), -- ready down(2), restart(3) -- } MAX-ACCESS read-write STATUS current DESCRIPTION "The desired state of the laser. The restart(3) state indicates that the edfa pump should be restarted. The restart(3) is not a state, thus it is not kept in the configuration file." ::= { edfaConfigEntry 4 } edfaPumpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), -- ready to pass packets down(2), restart(3), -- unknown(4) -- status can not be determined } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of the laser. If edfaPumpAdminStatus is down(2) then edfaPumpOperStatus should be down(2). If edfaPumpAdminStatus is changed to up(1) then edfaPumpOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic; it should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state. The operational status is equal to restart(3) if the edfa pump is still in restart process." ::= { edfaConfigEntry 5 } edfaStatus OBJECT-TYPE SYNTAX INTEGER (1..8191) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the Line Status of the Edfa module. The edfaStatus is a bit map represented as a sum, therefore, it can represent multiple failures (alarms) simultaneously. edfaNoAlarm must be set if and only if no other flag is set. The various bit positions are: 1 edfaNoAlarm No alarm present 2 edfaPumpTemperuture Pump temperatur is out-of-bound 4 edfaPumpWavelength Pump wavelength is out-of-bound 8 edfaHwFail Pump HW failure 16 edfaRvcSignalDetect Loss of input signal 32 edfaPumpPower Pump power is out-of-bound 64 edfaRcvPower Rx Power is out-of-bound 128 edfaTemprature Edfa temperature is out-of-bound 256 edfaEyeSafty Eye safety alarm (available only in eye-safety mode) 512 edafGainFlatness Gain flatness alarm 1024 edfaXmtPower Tx Power is out-of-bound 2048 edfaGain Edfa Gain is out-of-bound 4096 edfaEol Pump End Of Life" ::= { edfaConfigEntry 6 } edfaVoa OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The computed VOA output attenuation specified in 0.1 dB units. From 0.0 to +15.0 dB." ::= { edfaConfigEntry 7 } edfaAutomaticMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the Edfa automatic mode. If equals TRUE, the Edfa control mode should selected automaticaly. Otherwise it should be selected manualy." ::= { edfaConfigEntry 8 } edfaAdminControlMode OBJECT-TYPE SYNTAX INTEGER { apc(1), -- automatic power control (the default) agc(2) -- automatic gain control } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the Edfa control mode. This object may be set only when edfaAtomaticMode is FALSE." ::= { edfaConfigEntry 9 } edfaOperControlMode OBJECT-TYPE SYNTAX INTEGER { apc(1), -- automatic power control (the default) agc(2) -- automatic gain control } MAX-ACCESS read-only STATUS current DESCRIPTION "The current Edfa control mode. Initialy the Edfa starts in APC mode. The AGC mode is used only when selected manualy or after transient input power change." ::= { edfaConfigEntry 10 } edfaAdminGain OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The required Edfa Gain value given in 0.1 dB units. This value may be configured only when the edfa automatic mode is FALSE and the edfa control mode is Agc." ::= { edfaConfigEntry 11 } edfaOperGain OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The actual Edfa Gain value given in 0.1 dB units. Value range starts with 0.0 dbm" ::= { edfaConfigEntry 12 } edfaAdminOutputPower OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The required Edfa output power value given in 0.1 dBm units. The range starts with -30.0 dBm. This value may be configured only when the edfa control mode is Apc." ::= { edfaConfigEntry 13 } edfaOperOutputPower OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The actual Edfa output power value specified in 0.1 dBm units. Valid valuse are in the range of 0.0 dBm upto +15.0 dBm." ::= { edfaConfigEntry 14 } edfaChannelsNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of optical channels on this signal." ::= { edfaConfigEntry 15 } edfaTotalChannelsNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of optical channels on this fiber." ::= { edfaConfigEntry 16 } edfaEyeSafetyMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When in Eye-Safety mode the edfa reduces the laser power budget down to safe level upon detection of an output fiber cut." ::= { edfaConfigEntry 17 } edfaShutDownLipEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "EDFA shout-down on LIP (Loss of signal) - enable/disable." ::= { edfaConfigEntry 18 } edfaAutoPowerUpLipEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "EDFA automatic power up (after signal returns) - enable/disable." ::= { edfaConfigEntry 19 } edfaMaxGain OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The EDFA max gain is determined by the result of the VER command. Legal values: gainUnknown(1) gain14dbm(2) - Booster/Inline, (-2)-14dBm output power, gain (-5)-22dB gain17dbm(3) - Booster/Inline, (-2)-17dBm output power, gain (-5)-22dB gain20dbm(4) - Booster/Inline, (-2)-20dBm output power, gain (-5)-22dB gain23dbm(5) - Booster/Inline, 5-23dBm output power, gain (-5)-22dB, 16 channels gain18dbmPreAmp8Ch(6) - Preamp (-18)-5dBm output power, fixed gain 18dB gain18dbmPreAmp16ChRed(7) - Preamp (-18)-5dBm output power, fixed gain 18dB gain18dbmPreAmp16ChBlue(8)- Preamp (-18)-0dBm output power, fixed gain 18dB gain23dbmGain10(9) - Booster/Inline, 23dBm output power with fixed gain of 10dB, 32 channels " ::= { edfaConfigEntry 20 } -- Gain In Range from-to edfaGainInFrom OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Lower input gain range of the edfa in units of 0.1 db." ::= { edfaConfigEntry 21 } edfaGainInTo OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Upper input gain range of the edfa in units of 0.1 db." ::= { edfaConfigEntry 22 } -- Gain Out Range from-to edfaGainOutFrom OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Lower output gain range of the edfa in units of 0.1 db." ::= { edfaConfigEntry 23 } edfaGainOutTo OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Upper output gain range of the edfa in units of 0.1 db." ::= { edfaConfigEntry 24 } -- Power In Range from-to edfaPowerInFrom OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Lower input power range of the edfa in units of 0.1 dbm." ::= { edfaConfigEntry 25 } edfaPowerInTo OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Upper input power range of the edfa in units of 0.1 dbm." ::= { edfaConfigEntry 26 } -- Power Out Range from-to edfaPowerOutFrom OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Lower output power range of the edfa in units of 0.1 dbm." ::= { edfaConfigEntry 27 } edfaPowerOutTo OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Upper output power range of the edfa in units of 0.1 dbm." ::= { edfaConfigEntry 28 } -- Channel information edfaFromChannel OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The first channel number supported by the edfa; 0 to ignore." ::= { edfaConfigEntry 29 } edfaToChannel OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The last channel number supported by the edfa; 0 to ignore." ::= { edfaConfigEntry 30 } edfaOscChannel OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The wavelenght of the optical supervisory channel e.g. 1510, 1490." ::= { edfaConfigEntry 31 } edfaRedBlueType OBJECT-TYPE SYNTAX INTEGER { red(1), blue(2), none(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the edaf." ::= { edfaConfigEntry 32 } edfaRole OBJECT-TYPE SYNTAX INTEGER { booster(1), boosterInline(2), preamp(3), inline(4), raman(5), other(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The role of the edaf." ::= { edfaConfigEntry 33 } -- A description string edfaFreeDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A free text with additional edfa information." ::= { edfaConfigEntry 34 } edfaConfigSafetyThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The Eye Safety threshold level specified in dBm units. The value given in 0.1 dBm units. The range starts with -50.0 dBm." ::= { edfaConfigEntry 35 } -- ---------------------------------------------------- -- -- The Edfa Traps -- -- ---------------------------------------------------- edfaStatusChange NOTIFICATION-TYPE OBJECTS { edfaIfIndex, edfaStatus } STATUS current DESCRIPTION "A edfaStatusChange trap is sent when the value of an instance edfaStatus changes. It can be utilized by an NMS to trigger polls." ::= { edfaTraps 1 } edfaControlModeChange NOTIFICATION-TYPE OBJECTS { edfaIfIndex, edfaOperControlMode } STATUS current DESCRIPTION "A edfaControlModeChange trap is sent when the value of an instance edfaOperControlMode when going from APC to AGC (both directions) in automatic mode." ::= { edfaTraps 2 } edfaStatusChange0 NOTIFICATION-TYPE OBJECTS { edfaIfIndex, edfaStatus } STATUS current DESCRIPTION "A edfaStatusChange trap is sent when the value of an instance edfaStatus changes. It can be utilized by an NMS to trigger polls. It is defined to support browsers that don't recognize RFC 2576." ::= { edfaTraps0 1 } edfaControlModeChange0 NOTIFICATION-TYPE OBJECTS { edfaIfIndex, edfaOperControlMode } STATUS current DESCRIPTION "A edfaControlModeChange trap is sent when the value of an instance edfaOperControlMode when going from APC to AGC (both directions) in automatic mode. It is defined to support browsers that don't recognize RFC 2576." ::= { edfaTraps0 2 } END