POLYCOM-ENDPOINT-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE, Gauge32, Integer32, Unsigned32 FROM SNMPv2-SMI DisplayString, TruthValue, DateAndTime, TimeInterval, TimeStamp FROM SNMPv2-TC InetPortNumber, InetAddressIPv4, InetAddressIPv6, InetAddress, InetAddressType FROM INET-ADDRESS-MIB NOTIFICATION-GROUP, OBJECT-GROUP FROM SNMPv2-CONF polycom FROM POLYCOM-BASE-MIB; polycom-endpoint-MIB MODULE-IDENTITY LAST-UPDATED "201706091200Z" ORGANIZATION "Polycom, Inc." CONTACT-INFO "DL-SNMPWorkingGroup@Polycom.com" DESCRIPTION "This module is used for monitoring a unified communications network." REVISION "201706091200Z" DESCRIPTION "238869-162043" ::= { polycom 101 } --Notification group polycom-endpointNotifications OBJECT IDENTIFIER ::= { polycom-endpoint-MIB 0 } securityFailedAuthAttempt NOTIFICATION-TYPE OBJECTS { notificationVariableNodeName, notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity, notificationVariableConferenceID, notificationVariableServerName } STATUS current DESCRIPTION "Notification that an authentication attempt has failed." ::= { polycom-endpointNotifications 17} securitySuccessfulAuthAttempt NOTIFICATION-TYPE OBJECTS { notificationVariableNodeName, notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity, notificationVariableConferenceID, notificationVariableServerName } STATUS current DESCRIPTION "Notification that an authentication attempt has succeeded." ::= { polycom-endpointNotifications 19} securityPortLocked NOTIFICATION-TYPE OBJECTS { notificationVariableNodeName, notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity } STATUS current DESCRIPTION "Notification that an port has been locked for security reasons." ::= { polycom-endpointNotifications 21} securityPortUnlocked NOTIFICATION-TYPE OBJECTS { notificationVariableNodeName, notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity } STATUS current DESCRIPTION "Notification that an port has been unlocked after being locked for security reasons." ::= { polycom-endpointNotifications 22} securityAccountLocked NOTIFICATION-TYPE OBJECTS { notificationVariableNodeName, notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity } STATUS current DESCRIPTION "Notification that an account has been locked for security reasons." ::= { polycom-endpointNotifications 23} securityAccountUnlocked NOTIFICATION-TYPE OBJECTS { notificationVariableNodeName, notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity } STATUS current DESCRIPTION "Notification that an account has been unlocked after having been locked for security reasons." ::= { polycom-endpointNotifications 24} securityConfigChange NOTIFICATION-TYPE OBJECTS { notificationVariableNodeName, notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity } STATUS current DESCRIPTION "Notification that a configuration change has been performed." ::= { polycom-endpointNotifications 25} softwareUpdateStarted NOTIFICATION-TYPE OBJECTS { notificationVariableNodeName, notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity } STATUS current DESCRIPTION "Notification that a software update operation has begun." ::= { polycom-endpointNotifications 67} softwareUpdateComplete NOTIFICATION-TYPE OBJECTS { notificationVariableNodeName, notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity, notificationVariableValueOID } STATUS current DESCRIPTION "Notification that a software update operation has completed." ::= { polycom-endpointNotifications 68} softwareUpdateFailed NOTIFICATION-TYPE OBJECTS { notificationVariableNodeName, notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity } STATUS current DESCRIPTION "Notification that a software update operation has failed." ::= { polycom-endpointNotifications 69} h323GateKeeperRegistrationFailed NOTIFICATION-TYPE OBJECTS { notificationVariableNodeName, notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity, notificationVariableValueOID } STATUS current DESCRIPTION "Notification that an H.323 gatekeeper registration attempt has failed." ::= { polycom-endpointNotifications 70} h323GateKeeperRegistrationOK NOTIFICATION-TYPE OBJECTS { notificationVariableNodeName, notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity, notificationVariableValueOID } STATUS current DESCRIPTION "Notification that a previous H.323 gatekeeper registration error condition has cleared." ::= { polycom-endpointNotifications 71} sipRegistrationFailed NOTIFICATION-TYPE OBJECTS { notificationVariableNodeName, notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity, notificationVariableValueOID } STATUS current DESCRIPTION "Notification that a SIP registration attempt has failed." ::= { polycom-endpointNotifications 72} sipRegistrationOK NOTIFICATION-TYPE OBJECTS { notificationVariableNodeName, notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity, notificationVariableValueOID } STATUS current DESCRIPTION "Notification that a previous SIP registration error condition has cleared." ::= { polycom-endpointNotifications 73} isdnLineDown NOTIFICATION-TYPE OBJECTS { notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity } STATUS current DESCRIPTION "Notification that an ISDN or V.35 interface is down or reporting an error." ::= { polycom-endpointNotifications 74} isdnLineUp NOTIFICATION-TYPE OBJECTS { notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity } STATUS current DESCRIPTION "Notification that a previous ISDN or V.35 interface error condition has cleared." ::= { polycom-endpointNotifications 75} primaryCameraDown NOTIFICATION-TYPE OBJECTS { notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity } STATUS current DESCRIPTION "Notification that the primary camera has been disconnected or reports an error." ::= { polycom-endpointNotifications 76} primaryCameraOK NOTIFICATION-TYPE OBJECTS { notificationVariableNodeName, notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity } STATUS current DESCRIPTION "Notification that a previous primary camera error condition has cleared." ::= { polycom-endpointNotifications 77} callConnected NOTIFICATION-TYPE OBJECTS { notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity, notificationVariableValueOID, notificationVariableConferenceID } STATUS current DESCRIPTION "Notification that a conference has started or a participant has joined." ::= { polycom-endpointNotifications 78} callDisconnected NOTIFICATION-TYPE OBJECTS { notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity, notificationVariableValueOID, notificationVariableConferenceID } STATUS current DESCRIPTION "Notification that a conference has ended or a participant has departed." ::= { polycom-endpointNotifications 79} callFailed NOTIFICATION-TYPE OBJECTS { notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity, notificationVariableConferenceID } STATUS current DESCRIPTION "Notification that a call attempt has failed." ::= { polycom-endpointNotifications 80} jitterExcessive NOTIFICATION-TYPE OBJECTS { notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity, notificationVariableValueOID, notificationVariableThreshold, notificationVariableConferenceID } STATUS current DESCRIPTION "Notification that excessive jitter has been detected." ::= { polycom-endpointNotifications 81} jitterOK NOTIFICATION-TYPE OBJECTS { notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity, notificationVariableValueOID, notificationVariableThreshold, notificationVariableConferenceID } STATUS current DESCRIPTION "Notification that a previous excessive jitter condition has been cleared." ::= { polycom-endpointNotifications 82} latencyExcessive NOTIFICATION-TYPE OBJECTS { notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity, notificationVariableValueOID, notificationVariableThreshold, notificationVariableConferenceID } STATUS current DESCRIPTION "Notification that excessive latency has been detected." ::= { polycom-endpointNotifications 83} latencyOK NOTIFICATION-TYPE OBJECTS { notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity, notificationVariableValueOID, notificationVariableThreshold, notificationVariableConferenceID } STATUS current DESCRIPTION "Notification that a previous excessive latency condition has cleared." ::= { polycom-endpointNotifications 84} packetLossExcessive NOTIFICATION-TYPE OBJECTS { notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity, notificationVariableValueOID, notificationVariableThreshold, notificationVariableConferenceID } STATUS current DESCRIPTION "Notification that excessive packet loss has been detected." ::= { polycom-endpointNotifications 85} packetLossOK NOTIFICATION-TYPE OBJECTS { notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity, notificationVariableValueOID, notificationVariableThreshold, notificationVariableConferenceID } STATUS current DESCRIPTION "Notification that a previous excessive packet loss condition has cleared." ::= { polycom-endpointNotifications 86} presenceServerDown NOTIFICATION-TYPE OBJECTS { notificationVariableNodeName, notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity, notificationVariableServerName } STATUS current DESCRIPTION "Notification that an attempt to connect to the presence server failed." ::= { polycom-endpointNotifications 87} presenceServerOK NOTIFICATION-TYPE OBJECTS { notificationVariableNodeName, notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity, notificationVariableValueOID, notificationVariableServerName } STATUS current DESCRIPTION "Notification that a previous presence server error condition has cleared." ::= { polycom-endpointNotifications 88} cdrServerDown NOTIFICATION-TYPE OBJECTS { notificationVariableNodeName, notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity, notificationVariableValueOID } STATUS current DESCRIPTION "Notification that an attempt to connect to the CDR server failed." ::= { polycom-endpointNotifications 89} cdrServerOK NOTIFICATION-TYPE OBJECTS { notificationVariableNodeName, notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity, notificationVariableValueOID } STATUS current DESCRIPTION "Notification that a previous CDR server error condition has cleared." ::= { polycom-endpointNotifications 90} syslogServerDown NOTIFICATION-TYPE OBJECTS { notificationVariableNodeName, notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity, notificationVariableValueOID } STATUS current DESCRIPTION "Notification that an attempt to connect to the syslog server failed." ::= { polycom-endpointNotifications 91} syslogServerOK NOTIFICATION-TYPE OBJECTS { notificationVariableNodeName, notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity, notificationVariableValueOID } STATUS current DESCRIPTION "Notification that a previous syslog server error condition has cleared." ::= { polycom-endpointNotifications 92} softwareUpdateServerDown NOTIFICATION-TYPE OBJECTS { notificationVariableNodeName, notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity, notificationVariableValueOID } STATUS current DESCRIPTION "Notification that an attempt to connect to the software update server has failed." ::= { polycom-endpointNotifications 93} softwareUpdateServerOK NOTIFICATION-TYPE OBJECTS { notificationVariableNodeName, notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity, notificationVariableValueOID } STATUS current DESCRIPTION "Notification that a previous software update server error condition has cleared." ::= { polycom-endpointNotifications 94} provisioningServerDown NOTIFICATION-TYPE OBJECTS { notificationVariableNodeName, notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity, notificationVariableValueOID } STATUS current DESCRIPTION "Notification that an attempt to connect to the provisioning server has failed." ::= { polycom-endpointNotifications 95} provisioningServerOK NOTIFICATION-TYPE OBJECTS { notificationVariableNodeName, notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity, notificationVariableValueOID } STATUS current DESCRIPTION "Notification that a previous software provisioning server error condition has cleared." ::= { polycom-endpointNotifications 96} calendarServerDown NOTIFICATION-TYPE OBJECTS { notificationVariableNodeName, notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity, notificationVariableValueOID } STATUS current DESCRIPTION "Notification that an attempt to connect to the calendar server has failed." ::= { polycom-endpointNotifications 97} calendarServerOK NOTIFICATION-TYPE OBJECTS { notificationVariableNodeName, notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity, notificationVariableValueOID } STATUS current DESCRIPTION "Notification that a previous calendar server error condition has cleared." ::= { polycom-endpointNotifications 98} directoryServerDown NOTIFICATION-TYPE OBJECTS { notificationVariableNodeName, notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity, notificationVariableValueOID } STATUS current DESCRIPTION "Notification that an attempt to connect to the directory server has failed." ::= { polycom-endpointNotifications 99} directoryServerOK NOTIFICATION-TYPE OBJECTS { notificationVariableNodeName, notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity, notificationVariableValueOID } STATUS current DESCRIPTION "Notification that a previous directory server error condition has cleared." ::= { polycom-endpointNotifications 100} remoteControlBatteryLow NOTIFICATION-TYPE OBJECTS { notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity } STATUS current DESCRIPTION "Notification that the remote control battery level is low." ::= { polycom-endpointNotifications 101} remoteControlBatteryOK NOTIFICATION-TYPE OBJECTS { notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity } STATUS current DESCRIPTION "Notification that a previous low remote control battery condition has cleared." ::= { polycom-endpointNotifications 102} --Object group polycom-endpointObjects OBJECT IDENTIFIER ::= { polycom-endpoint-MIB 1 } --Section identity OBJECT IDENTIFIER ::= { polycom-endpointObjects 1 } -- Scalar identitySoftwareInfo OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Information about software currently installed on the device." ::= { identity 1 } -- Scalar identityBuildDate OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The date this product was built." ::= { identity 2 } -- Scalar identityDeviceType OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This device's type." ::= { identity 3 } -- Scalar identityDeviceModel OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The device's model." ::= { identity 4 } -- Scalar identityDeviceSerialNumber OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The device's serial number." ::= { identity 5 } -- Scalar identityStatus OBJECT-TYPE SYNTAX INTEGER { disabled(1), ok(2), failed(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The overall status of the device." ::= { identity 6 } -- Scalar identityDebugMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Is this device in debug mode?" ::= { identity 7 } -- Scalar identityConsoleAccess OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Is access to the console enabled?" ::= { identity 8 } -- Scalar identityMIBVersionSupported OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The version of this MIB that this agent is using." ::= { identity 9 } -- Scalar identityLastDataUpdateTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time any data in this MIB was updated." ::= { identity 10 } --Section service OBJECT IDENTIFIER ::= { polycom-endpointObjects 2 } --Group serviceH323 OBJECT IDENTIFIER ::= { service 7 } -- Scalar serviceH323Status OBJECT-TYPE SYNTAX INTEGER { disabled(1), ok(2), failed(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "H323 stack enabled/disabled on the reporting device." ::= { serviceH323 1 } -- Scalar serviceH323RegistrationStatus OBJECT-TYPE SYNTAX INTEGER { disabled(1), ok(2), failed(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "H323 registration status." ::= { serviceH323 2 } -- Table serviceH323GatekeeperTable OBJECT-TYPE SYNTAX SEQUENCE OF ServiceH323GatekeeperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of gatekeepers status information" ::= { serviceH323 3 } -- Entry serviceH323GatekeeperEntry OBJECT-TYPE SYNTAX ServiceH323GatekeeperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of gatekeepers status information" INDEX { serviceH323GatekeeperIndex } ::= { serviceH323GatekeeperTable 1 } -- Sequence ServiceH323GatekeeperEntry ::= SEQUENCE { serviceH323GatekeeperIndex Unsigned32, serviceH323GatekeeperStatus INTEGER, serviceH323GatekeeperH239Enabled Integer32 } --Index serviceH323GatekeeperIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Primary index for this table." ::= { serviceH323GatekeeperEntry 1 } -- Column serviceH323GatekeeperStatus OBJECT-TYPE SYNTAX INTEGER { disabled(1), ok(2), failed(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the gatekeeper." ::= { serviceH323GatekeeperEntry 2 } -- Column serviceH323GatekeeperH239Enabled OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "H239 enabled." ::= { serviceH323GatekeeperEntry 3 } --Group serviceSip OBJECT IDENTIFIER ::= { service 8 } -- Scalar serviceSipStatus OBJECT-TYPE SYNTAX INTEGER { disabled(1), ok(2), failed(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "SIP stack enabled/disabled on the reporting device." ::= { serviceSip 1 } -- Table serviceSipProxyTable OBJECT-TYPE SYNTAX SEQUENCE OF ServiceSipProxyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of SIP proxies status information" ::= { serviceSip 2 } -- Entry serviceSipProxyEntry OBJECT-TYPE SYNTAX ServiceSipProxyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of SIP proxies status information" INDEX { serviceSipProxyIndex } ::= { serviceSipProxyTable 1 } -- Sequence ServiceSipProxyEntry ::= SEQUENCE { serviceSipProxyIndex Unsigned32, serviceSipProxyStatus INTEGER } --Index serviceSipProxyIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Primary index for this table." ::= { serviceSipProxyEntry 1 } -- Column serviceSipProxyStatus OBJECT-TYPE SYNTAX INTEGER { disabled(1), ok(2), failed(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the SIP proxy." ::= { serviceSipProxyEntry 2 } -- Table serviceSipRegistrationTable OBJECT-TYPE SYNTAX SEQUENCE OF ServiceSipRegistrationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of SIP registration status information" ::= { serviceSip 3 } -- Entry serviceSipRegistrationEntry OBJECT-TYPE SYNTAX ServiceSipRegistrationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of SIP registration status information" INDEX { serviceSipRegistrationIndex } ::= { serviceSipRegistrationTable 1 } -- Sequence ServiceSipRegistrationEntry ::= SEQUENCE { serviceSipRegistrationIndex Unsigned32, serviceSipRegistrationStatus INTEGER } --Index serviceSipRegistrationIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Primary index for this table." ::= { serviceSipRegistrationEntry 1 } -- Column serviceSipRegistrationStatus OBJECT-TYPE SYNTAX INTEGER { disabled(1), ok(2), failed(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "SIP registration status." ::= { serviceSipRegistrationEntry 2 } --Group serviceIsdn OBJECT IDENTIFIER ::= { service 9 } -- Scalar serviceIsdnStatus OBJECT-TYPE SYNTAX INTEGER { disabled(1), ok(2), failed(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The roll-up of the status information in the table." ::= { serviceIsdn 1 } --Group serviceSecurity OBJECT IDENTIFIER ::= { service 10 } -- Scalar serviceSecurityProfile OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the security profile in use." ::= { serviceSecurity 1 } --Section hardware OBJECT IDENTIFIER ::= { polycom-endpointObjects 3 } -- Scalar hardwareOverallStatus OBJECT-TYPE SYNTAX INTEGER { disabled(1), ok(2), failed(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The overall status of this agent's hardware." ::= { hardware 1 } --Group hardwareMicrophone OBJECT IDENTIFIER ::= { hardware 5 } -- Scalar hardwareMicrophoneStatus OBJECT-TYPE SYNTAX INTEGER { disabled(1), ok(2), failed(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Roll-up of the microphones operational status info from the table." ::= { hardwareMicrophone 1 } -- Table hardwareMicrophoneMicrophonesTable OBJECT-TYPE SYNTAX SEQUENCE OF HardwareMicrophoneMicrophonesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of microphones status information." ::= { hardwareMicrophone 2 } -- Entry hardwareMicrophoneMicrophonesEntry OBJECT-TYPE SYNTAX HardwareMicrophoneMicrophonesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of microphones status information." INDEX { hardwareMicrophoneMicrophonesIndex } ::= { hardwareMicrophoneMicrophonesTable 1 } -- Sequence HardwareMicrophoneMicrophonesEntry ::= SEQUENCE { hardwareMicrophoneMicrophonesIndex Unsigned32, hardwareMicrophoneMicrophonesName DisplayString, hardwareMicrophoneMicrophonesStatus INTEGER } --Index hardwareMicrophoneMicrophonesIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Primary index for this table." ::= { hardwareMicrophoneMicrophonesEntry 1 } -- Column hardwareMicrophoneMicrophonesName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The microphone's display name." ::= { hardwareMicrophoneMicrophonesEntry 2 } -- Column hardwareMicrophoneMicrophonesStatus OBJECT-TYPE SYNTAX INTEGER { disabled(1), ok(2), failed(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The microphone's operational status." ::= { hardwareMicrophoneMicrophonesEntry 3 } --Group hardwareCamera OBJECT IDENTIFIER ::= { hardware 6 } -- Scalar hardwareCameraStatus OBJECT-TYPE SYNTAX INTEGER { disabled(1), ok(2), failed(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Roll-up of the camera operational status info from the table." ::= { hardwareCamera 1 } -- Table hardwareCameraCamerasTable OBJECT-TYPE SYNTAX SEQUENCE OF HardwareCameraCamerasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of cameras status information." ::= { hardwareCamera 2 } -- Entry hardwareCameraCamerasEntry OBJECT-TYPE SYNTAX HardwareCameraCamerasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of cameras status information." INDEX { hardwareCameraCamerasIndex } ::= { hardwareCameraCamerasTable 1 } -- Sequence HardwareCameraCamerasEntry ::= SEQUENCE { hardwareCameraCamerasIndex Unsigned32, hardwareCameraCamerasName DisplayString, hardwareCameraCamerasStatus INTEGER } --Index hardwareCameraCamerasIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Primary index for this table." ::= { hardwareCameraCamerasEntry 1 } -- Column hardwareCameraCamerasName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The camera display name." ::= { hardwareCameraCamerasEntry 2 } -- Column hardwareCameraCamerasStatus OBJECT-TYPE SYNTAX INTEGER { disabled(1), ok(2), failed(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The camera's operational status." ::= { hardwareCameraCamerasEntry 3 } --Group hardwareNIC OBJECT IDENTIFIER ::= { hardware 10 } -- Scalar hardwareNICStatus OBJECT-TYPE SYNTAX INTEGER { disabled(1), ok(2), failed(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Roll-up of the status info from all the status entries in the table." ::= { hardwareNIC 1 } -- Table hardwareNICNICsTable OBJECT-TYPE SYNTAX SEQUENCE OF HardwareNICNICsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of NICs status information." ::= { hardwareNIC 2 } -- Entry hardwareNICNICsEntry OBJECT-TYPE SYNTAX HardwareNICNICsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of NICs status information." INDEX { hardwareNICNICsIndex } ::= { hardwareNICNICsTable 1 } -- Sequence HardwareNICNICsEntry ::= SEQUENCE { hardwareNICNICsIndex Unsigned32, hardwareNICNICsName DisplayString, hardwareNICNICsMAC DisplayString, hardwareNICNICsSpeed Unsigned32, hardwareNICNICsDuplex DisplayString, hardwareNICNICsStatus INTEGER, hardwareNICNICsIPType Integer32 } --Index hardwareNICNICsIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Primary index for this table." ::= { hardwareNICNICsEntry 1 } -- Column hardwareNICNICsName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the network interface card." ::= { hardwareNICNICsEntry 2 } -- Column hardwareNICNICsMAC OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address of the network interface card." ::= { hardwareNICNICsEntry 3 } -- Column hardwareNICNICsSpeed OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The speed of the network interface card (Mbps)." ::= { hardwareNICNICsEntry 4 } -- Column hardwareNICNICsDuplex OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The duplex mode of the network interface card." ::= { hardwareNICNICsEntry 5 } -- Column hardwareNICNICsStatus OBJECT-TYPE SYNTAX INTEGER { disabled(1), ok(2), failed(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the hardware network interface card." ::= { hardwareNICNICsEntry 6 } -- Column hardwareNICNICsIPType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Supported IP versions." ::= { hardwareNICNICsEntry 7 } --Group hardwarePTC OBJECT IDENTIFIER ::= { hardware 11 } -- Scalar hardwarePTCStatus OBJECT-TYPE SYNTAX INTEGER { disabled(1), ok(2), failed(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Roll-up of the status info from all entries in the table." ::= { hardwarePTC 1 } -- Table hardwarePTCPTCsTable OBJECT-TYPE SYNTAX SEQUENCE OF HardwarePTCPTCsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of PTCs status information." ::= { hardwarePTC 2 } -- Entry hardwarePTCPTCsEntry OBJECT-TYPE SYNTAX HardwarePTCPTCsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of PTCs status information." INDEX { hardwarePTCPTCsIndex } ::= { hardwarePTCPTCsTable 1 } -- Sequence HardwarePTCPTCsEntry ::= SEQUENCE { hardwarePTCPTCsIndex Unsigned32, hardwarePTCPTCsStatus DisplayString } --Index hardwarePTCPTCsIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Primary index for this table." ::= { hardwarePTCPTCsEntry 1 } -- Column hardwarePTCPTCsStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the Polycom Touch Control peripheral." ::= { hardwarePTCPTCsEntry 2 } --Group hardwareUcBoard OBJECT IDENTIFIER ::= { hardware 12 } -- Scalar hardwareUcBoardStatus OBJECT-TYPE SYNTAX INTEGER { disabled(1), ok(2), failed(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Overall operational status of the boards." ::= { hardwareUcBoard 1 } -- Table hardwareUcBoardUcBoardsTable OBJECT-TYPE SYNTAX SEQUENCE OF HardwareUcBoardUcBoardsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of UcBoards status information." ::= { hardwareUcBoard 2 } -- Entry hardwareUcBoardUcBoardsEntry OBJECT-TYPE SYNTAX HardwareUcBoardUcBoardsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of UcBoards status information." INDEX { hardwareUcBoardUcBoardsIndex } ::= { hardwareUcBoardUcBoardsTable 1 } -- Sequence HardwareUcBoardUcBoardsEntry ::= SEQUENCE { hardwareUcBoardUcBoardsIndex Unsigned32, hardwareUcBoardUcBoardsStatus DisplayString } --Index hardwareUcBoardUcBoardsIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Primary index for this table." ::= { hardwareUcBoardUcBoardsEntry 1 } -- Column hardwareUcBoardUcBoardsStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status of the board." ::= { hardwareUcBoardUcBoardsEntry 2 } --Section call OBJECT IDENTIFIER ::= { polycom-endpointObjects 4 } -- Table callActiveCallsTable OBJECT-TYPE SYNTAX SEQUENCE OF CallActiveCallsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { call 1 } -- Entry callActiveCallsEntry OBJECT-TYPE SYNTAX CallActiveCallsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { callActiveCallsIndex } ::= { callActiveCallsTable 1 } -- Sequence CallActiveCallsEntry ::= SEQUENCE { callActiveCallsIndex Unsigned32, callActiveCallsCallID DisplayString, callActiveCallsConfID DisplayString, callActiveCallsVoiceJitterRX Unsigned32, callActiveCallsVoiceJitterTX Unsigned32, callActiveCallsVoiceLatencyRX Unsigned32, callActiveCallsVoiceLatencyTX Unsigned32, callActiveCallsVoicePacketLossRX Unsigned32, callActiveCallsVoicePacketLossTX Unsigned32, callActiveCallsVoiceProtocolRX DisplayString, callActiveCallsVoiceProtocolTX DisplayString, callActiveCallsMaxVoiceJitterRX Unsigned32, callActiveCallsMaxVoiceJitterTX Unsigned32, callActiveCallsTotalPacketsLostRX Unsigned32, callActiveCallsTotalPacketsLostTX Unsigned32, callActiveCallsPctPacketLostRX Unsigned32, callActiveCallsPctPacketLostTX Unsigned32, callActiveCallsOverallLatencyRX Unsigned32, callActiveCallsOverallLatencyTX Unsigned32, callActiveCallsOverallJitterRX Unsigned32, callActiveCallsOverallJitterTX Unsigned32, callActiveCallsContentFormatRsltnRX DisplayString, callActiveCallsContentFormatRsltnTX DisplayString, callActiveCallsContentFrameRateRX DisplayString, callActiveCallsContentFrameRateTX DisplayString, callActiveCallsContentJitterRX Unsigned32, callActiveCallsContentJitterTX Unsigned32, callActiveCallsContentLatencyRX Unsigned32, callActiveCallsContentLatencyTX Unsigned32, callActiveCallsContentPacketLossRX Unsigned32, callActiveCallsContentPacketLossTX Unsigned32, callActiveCallsContentProtocolRX DisplayString, callActiveCallsContentProtocolTX DisplayString, callActiveCallsContentRateRX Unsigned32, callActiveCallsContentRateTX Unsigned32, callActiveCallsContentRateUsedRX Unsigned32, callActiveCallsContentRateUsedTX Unsigned32, callActiveCallsVideoAnnexRX DisplayString, callActiveCallsVideoAnnexTX DisplayString, callActiveCallsVideoFECErrorsRX Unsigned32, callActiveCallsVideoFECErrorsTX Unsigned32, callActiveCallsVideoRsltnRX DisplayString, callActiveCallsVideoRsltnTX DisplayString, callActiveCallsVideoFrameRateRX DisplayString, callActiveCallsVideoFrameRateTX DisplayString, callActiveCallsVideoJitterRX Unsigned32, callActiveCallsVideoJitterTX Unsigned32, callActiveCallsVideoLatencyRX Unsigned32, callActiveCallsVideoLatencyTX Unsigned32, callActiveCallsVideoPacketLossRX Unsigned32, callActiveCallsVideoPacketLossTX Unsigned32, callActiveCallsVideoProtocolRX DisplayString, callActiveCallsVideoProtocolTX DisplayString, callActiveCallsVideoRateRX Unsigned32, callActiveCallsVideoRateTX Unsigned32, callActiveCallsVideoRateUsedRX Unsigned32, callActiveCallsVideoRateUsedTX Unsigned32, callActiveCallsFarSiteName DisplayString, callActiveCallsFarSiteSystemType DisplayString, callActiveCallsCallType DisplayString, callActiveCallsEncryption DisplayString, callActiveCallsPrecedenceLevel DisplayString, callActiveCallsSendingContent TruthValue } --Index callActiveCallsIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Primary index for this table." ::= { callActiveCallsEntry 1 } -- Column callActiveCallsCallID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The CallID of the call this entry refers to." ::= { callActiveCallsEntry 2 } -- Column callActiveCallsConfID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The ID of the conf this call is a part of." ::= { callActiveCallsEntry 3 } -- Column callActiveCallsVoiceJitterRX OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Receive voice jitter." ::= { callActiveCallsEntry 4 } -- Column callActiveCallsVoiceJitterTX OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit voice jitter." ::= { callActiveCallsEntry 5 } -- Column callActiveCallsVoiceLatencyRX OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Receive voice latency." ::= { callActiveCallsEntry 6 } -- Column callActiveCallsVoiceLatencyTX OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit voice latency." ::= { callActiveCallsEntry 7 } -- Column callActiveCallsVoicePacketLossRX OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Receive voice packet loss." ::= { callActiveCallsEntry 8 } -- Column callActiveCallsVoicePacketLossTX OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit voice packet loss." ::= { callActiveCallsEntry 9 } -- Column callActiveCallsVoiceProtocolRX OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Receive voice protocol." ::= { callActiveCallsEntry 10 } -- Column callActiveCallsVoiceProtocolTX OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit voice protocol." ::= { callActiveCallsEntry 11 } -- Column callActiveCallsMaxVoiceJitterRX OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Receive voice max jitter." ::= { callActiveCallsEntry 12 } -- Column callActiveCallsMaxVoiceJitterTX OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit voice max jitter." ::= { callActiveCallsEntry 13 } -- Column callActiveCallsTotalPacketsLostRX OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Receive total packets lost." ::= { callActiveCallsEntry 14 } -- Column callActiveCallsTotalPacketsLostTX OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit total packets lost." ::= { callActiveCallsEntry 15 } -- Column callActiveCallsPctPacketLostRX OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Receive percentage packets lost." ::= { callActiveCallsEntry 16 } -- Column callActiveCallsPctPacketLostTX OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit percentage packets lost." ::= { callActiveCallsEntry 17 } -- Column callActiveCallsOverallLatencyRX OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Receive overall latency." ::= { callActiveCallsEntry 18 } -- Column callActiveCallsOverallLatencyTX OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit overall latency." ::= { callActiveCallsEntry 19 } -- Column callActiveCallsOverallJitterRX OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Receive overall latency." ::= { callActiveCallsEntry 20 } -- Column callActiveCallsOverallJitterTX OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit overall latency." ::= { callActiveCallsEntry 21 } -- Column callActiveCallsContentFormatRsltnRX OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Receive content format." ::= { callActiveCallsEntry 22 } -- Column callActiveCallsContentFormatRsltnTX OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit content format." ::= { callActiveCallsEntry 23 } -- Column callActiveCallsContentFrameRateRX OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Receive content frame rate." ::= { callActiveCallsEntry 24 } -- Column callActiveCallsContentFrameRateTX OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit content frame rate." ::= { callActiveCallsEntry 25 } -- Column callActiveCallsContentJitterRX OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Receive content jitter." ::= { callActiveCallsEntry 26 } -- Column callActiveCallsContentJitterTX OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit content jitter." ::= { callActiveCallsEntry 27 } -- Column callActiveCallsContentLatencyRX OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Receive content latency." ::= { callActiveCallsEntry 28 } -- Column callActiveCallsContentLatencyTX OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit content latency." ::= { callActiveCallsEntry 29 } -- Column callActiveCallsContentPacketLossRX OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Receive packet loss." ::= { callActiveCallsEntry 30 } -- Column callActiveCallsContentPacketLossTX OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit packet loss." ::= { callActiveCallsEntry 31 } -- Column callActiveCallsContentProtocolRX OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Receive content protocol." ::= { callActiveCallsEntry 32 } -- Column callActiveCallsContentProtocolTX OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit content protocol." ::= { callActiveCallsEntry 33 } -- Column callActiveCallsContentRateRX OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Receive content protocol." ::= { callActiveCallsEntry 34 } -- Column callActiveCallsContentRateTX OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit content rate." ::= { callActiveCallsEntry 35 } -- Column callActiveCallsContentRateUsedRX OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Receive used content rate." ::= { callActiveCallsEntry 36 } -- Column callActiveCallsContentRateUsedTX OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit used content rate." ::= { callActiveCallsEntry 37 } -- Column callActiveCallsVideoAnnexRX OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Video annex receive protocol." ::= { callActiveCallsEntry 38 } -- Column callActiveCallsVideoAnnexTX OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Video annex transmit protocol." ::= { callActiveCallsEntry 39 } -- Column callActiveCallsVideoFECErrorsRX OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Video forward error corection receive." ::= { callActiveCallsEntry 40 } -- Column callActiveCallsVideoFECErrorsTX OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Video forward error corection transmit." ::= { callActiveCallsEntry 41 } -- Column callActiveCallsVideoRsltnRX OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { callActiveCallsEntry 42 } -- Column callActiveCallsVideoRsltnTX OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { callActiveCallsEntry 43 } -- Column callActiveCallsVideoFrameRateRX OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Receive video frame rate." ::= { callActiveCallsEntry 44 } -- Column callActiveCallsVideoFrameRateTX OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit video frame rate." ::= { callActiveCallsEntry 45 } -- Column callActiveCallsVideoJitterRX OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Receive video jitter." ::= { callActiveCallsEntry 46 } -- Column callActiveCallsVideoJitterTX OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit video jitter." ::= { callActiveCallsEntry 47 } -- Column callActiveCallsVideoLatencyRX OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Receive video lantency." ::= { callActiveCallsEntry 48 } -- Column callActiveCallsVideoLatencyTX OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit video lantency." ::= { callActiveCallsEntry 49 } -- Column callActiveCallsVideoPacketLossRX OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Receive video packet loss." ::= { callActiveCallsEntry 50 } -- Column callActiveCallsVideoPacketLossTX OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit video packet loss." ::= { callActiveCallsEntry 51 } -- Column callActiveCallsVideoProtocolRX OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Receive video protocol." ::= { callActiveCallsEntry 52 } -- Column callActiveCallsVideoProtocolTX OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit video protocol." ::= { callActiveCallsEntry 53 } -- Column callActiveCallsVideoRateRX OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Receive video rate." ::= { callActiveCallsEntry 54 } -- Column callActiveCallsVideoRateTX OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit video rate." ::= { callActiveCallsEntry 55 } -- Column callActiveCallsVideoRateUsedRX OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Receive video rate used." ::= { callActiveCallsEntry 56 } -- Column callActiveCallsVideoRateUsedTX OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit video rate used." ::= { callActiveCallsEntry 57 } -- Column callActiveCallsFarSiteName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Far end display name." ::= { callActiveCallsEntry 58 } -- Column callActiveCallsFarSiteSystemType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Far end system type." ::= { callActiveCallsEntry 59 } -- Column callActiveCallsCallType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Call type." ::= { callActiveCallsEntry 60 } -- Column callActiveCallsEncryption OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Encryption algorithm used." ::= { callActiveCallsEntry 61 } -- Column callActiveCallsPrecedenceLevel OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { callActiveCallsEntry 62 } -- Column callActiveCallsSendingContent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Content sharing indicator." ::= { callActiveCallsEntry 63 } --Section conference OBJECT IDENTIFIER ::= { polycom-endpointObjects 5 } -- Scalar conferenceNumberActiveConferences OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ongoing conferences." ::= { conference 1 } --Section externalIntegration OBJECT IDENTIFIER ::= { polycom-endpointObjects 6 } -- Scalar externalIntegrationStatus OBJECT-TYPE SYNTAX INTEGER { disabled(1), ok(2), failed(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Overal status of the external services integration." ::= { externalIntegration 1 } --Group externalIntegrationPresence OBJECT IDENTIFIER ::= { externalIntegration 7 } -- Scalar externalIntegrationPresenceStatus OBJECT-TYPE SYNTAX INTEGER { disabled(1), ok(2), failed(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the integration with the Presence service." ::= { externalIntegrationPresence 1 } --Group externalIntegrationCDR OBJECT IDENTIFIER ::= { externalIntegration 8 } -- Scalar externalIntegrationCDRStatus OBJECT-TYPE SYNTAX INTEGER { disabled(1), ok(2), failed(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the integration with the CDR service." ::= { externalIntegrationCDR 1 } --Group externalIntegrationSyslog OBJECT IDENTIFIER ::= { externalIntegration 9 } -- Scalar externalIntegrationSyslogStatus OBJECT-TYPE SYNTAX INTEGER { disabled(1), ok(2), failed(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the integration with the Syslog service." ::= { externalIntegrationSyslog 1 } --Group externalIntegrationSoftwareUpdate OBJECT IDENTIFIER ::= { externalIntegration 10 } -- Scalar externalIntegrationSoftwareUpdateStatus OBJECT-TYPE SYNTAX INTEGER { disabled(1), ok(2), failed(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the integration with the Software Update service." ::= { externalIntegrationSoftwareUpdate 1 } --Group externalIntegrationProvisioning OBJECT IDENTIFIER ::= { externalIntegration 11 } -- Scalar externalIntegrationProvisioningStatus OBJECT-TYPE SYNTAX INTEGER { disabled(1), ok(2), failed(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the integration with the Provisioning service." ::= { externalIntegrationProvisioning 1 } --Group externalIntegrationExchange OBJECT IDENTIFIER ::= { externalIntegration 12 } -- Scalar externalIntegrationExchangeStatus OBJECT-TYPE SYNTAX INTEGER { disabled(1), ok(2), failed(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the integration with the Exchange service." ::= { externalIntegrationExchange 1 } -- Table externalIntegrationExchangeServerTable OBJECT-TYPE SYNTAX SEQUENCE OF ExternalIntegrationExchangeServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Exchange servers integration status information." ::= { externalIntegrationExchange 2 } -- Entry externalIntegrationExchangeServerEntry OBJECT-TYPE SYNTAX ExternalIntegrationExchangeServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Exchange servers integration status information." INDEX { externalIntegrationExchangeServerIndex } ::= { externalIntegrationExchangeServerTable 1 } -- Sequence ExternalIntegrationExchangeServerEntry ::= SEQUENCE { externalIntegrationExchangeServerIndex Unsigned32, externalIntegrationExchangeServerName DisplayString, externalIntegrationExchangeServerIpAddress InetAddress, externalIntegrationExchangeServerSubscriptionStatus INTEGER, externalIntegrationExchangeServerMeetingsScheduledToday Unsigned32, externalIntegrationExchangeServerIntegrator DisplayString } --Index externalIntegrationExchangeServerIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Primary index for this table." ::= { externalIntegrationExchangeServerEntry 1 } -- Column externalIntegrationExchangeServerName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Display name." ::= { externalIntegrationExchangeServerEntry 2 } -- Column externalIntegrationExchangeServerIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IP address." ::= { externalIntegrationExchangeServerEntry 3 } -- Column externalIntegrationExchangeServerSubscriptionStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), unavailable(2), error(3), disabled(4), ignoredNoEnterpriseDirectory(5), ignoredMailboxNotFound(6), authFailed(7), subscriptionPending(8), subscriptionOK(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "Subscription status." ::= { externalIntegrationExchangeServerEntry 4 } -- Column externalIntegrationExchangeServerMeetingsScheduledToday OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of meetings scheduled for today." ::= { externalIntegrationExchangeServerEntry 5 } -- Column externalIntegrationExchangeServerIntegrator OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates which single member of the supercluster performed the integration to the Exchange Server" ::= { externalIntegrationExchangeServerEntry 6 } --Group externalIntegrationDirectorySvcs OBJECT IDENTIFIER ::= { externalIntegration 13 } -- Scalar externalIntegrationDirectorySvcsStatus OBJECT-TYPE SYNTAX INTEGER { disabled(1), ok(2), failed(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Operational status." ::= { externalIntegrationDirectorySvcs 1 } -- Table externalIntegrationDirectorySvcsServerTable OBJECT-TYPE SYNTAX SEQUENCE OF ExternalIntegrationDirectorySvcsServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { externalIntegrationDirectorySvcs 3 } -- Entry externalIntegrationDirectorySvcsServerEntry OBJECT-TYPE SYNTAX ExternalIntegrationDirectorySvcsServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { externalIntegrationDirectorySvcsServerIndex } ::= { externalIntegrationDirectorySvcsServerTable 1 } -- Sequence ExternalIntegrationDirectorySvcsServerEntry ::= SEQUENCE { externalIntegrationDirectorySvcsServerIndex Unsigned32, externalIntegrationDirectorySvcsServerStatus INTEGER, externalIntegrationDirectorySvcsServerId DisplayString, externalIntegrationDirectorySvcsServerCacheStatus INTEGER, externalIntegrationDirectorySvcsServerConnectionSecure TruthValue, externalIntegrationDirectorySvcsServerCacheRefreshDate DateAndTime, externalIntegrationDirectorySvcsServerEnterpriseConferenceRooms Unsigned32, externalIntegrationDirectorySvcsServerIntegrator DisplayString } --Index externalIntegrationDirectorySvcsServerIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Primary index for this table." ::= { externalIntegrationDirectorySvcsServerEntry 1 } -- Column externalIntegrationDirectorySvcsServerStatus OBJECT-TYPE SYNTAX INTEGER { disabled(1), ok(2), failed(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Directory service operational status." ::= { externalIntegrationDirectorySvcsServerEntry 2 } -- Column externalIntegrationDirectorySvcsServerId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The user ID of the service account used to integrate with enterprise directory." ::= { externalIntegrationDirectorySvcsServerEntry 3 } -- Column externalIntegrationDirectorySvcsServerCacheStatus OBJECT-TYPE SYNTAX INTEGER { disabled(1), connecting(2), integratedWithEncryption(3), integratedWithoutEncryption(4), failed(5), outdated(6), failedNoSuchEnterpriseUser(7), failedEnterpriseAuthentication(8), failedInvalidEnterpriseCredentials(9), failedEnterpriseAuthenticationWithCode(10), failedConnection(11) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the enterprise directory caching." ::= { externalIntegrationDirectorySvcsServerEntry 4 } -- Column externalIntegrationDirectorySvcsServerConnectionSecure OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the connection is secure or not." ::= { externalIntegrationDirectorySvcsServerEntry 5 } -- Column externalIntegrationDirectorySvcsServerCacheRefreshDate OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time of last cache refresh." ::= { externalIntegrationDirectorySvcsServerEntry 6 } -- Column externalIntegrationDirectorySvcsServerEnterpriseConferenceRooms OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of enterprise conference rooms generated by enterprise directory integration." ::= { externalIntegrationDirectorySvcsServerEntry 7 } -- Column externalIntegrationDirectorySvcsServerIntegrator OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the cluster integrating with the enterprise directory service." ::= { externalIntegrationDirectorySvcsServerEntry 8 } --Group externalIntegrationNTP OBJECT IDENTIFIER ::= { externalIntegration 15 } --Section notificationVariable OBJECT IDENTIFIER ::= { polycom-endpointObjects 99 } -- Scalar notificationVariableNodeName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "" ::= { notificationVariable 1 } -- Scalar notificationVariableReportingNodeName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "" ::= { notificationVariable 2 } -- Scalar notificationVariableType OBJECT-TYPE SYNTAX INTEGER { problem(1), resolution(2), info(3) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "" ::= { notificationVariable 3 } -- Scalar notificationVariableClass OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "" ::= { notificationVariable 4 } -- Scalar notificationVariableKey OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "" ::= { notificationVariable 5 } -- Scalar notificationVariableSummary OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "" ::= { notificationVariable 6 } -- Scalar notificationVariableSeverity OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), informational(6), debug(7) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The notification's severity level." ::= { notificationVariable 7 } -- Scalar notificationVariableValueOID OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "For threshold notifications this object points to the OID where the current value can be retrieved." ::= { notificationVariable 8 } -- Scalar notificationVariableThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "For threshold notifications this object contains the value of the threshold that was breached." ::= { notificationVariable 9 } -- Scalar notificationVariableConferenceID OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object contains the conference ID with which the notification is associated." ::= { notificationVariable 10 } -- Scalar notificationVariableServerName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object contains the name of the server the notification reports about." ::= { notificationVariable 11 } polycom-endpointMIBConformance OBJECT IDENTIFIER ::= { polycom-endpoint-MIB 2 } polycom-endpointMIBGroups OBJECT IDENTIFIER ::= { polycom-endpointMIBConformance 2 } identityObjects OBJECT-GROUP OBJECTS { identitySoftwareInfo, identityBuildDate, identityDeviceType, identityDeviceModel, identityDeviceSerialNumber, identityStatus, identityDebugMode, identityConsoleAccess, identityMIBVersionSupported, identityLastDataUpdateTime } STATUS current DESCRIPTION "Contains all objects in the identity section" ::= { polycom-endpointMIBGroups 1 } serviceObjects OBJECT-GROUP OBJECTS { serviceH323Status, serviceH323RegistrationStatus, serviceH323GatekeeperIndex, serviceH323GatekeeperStatus, serviceH323GatekeeperH239Enabled, serviceSipStatus, serviceSipProxyIndex, serviceSipProxyStatus, serviceSipRegistrationIndex, serviceSipRegistrationStatus, serviceIsdnStatus, serviceSecurityProfile } STATUS current DESCRIPTION "Contains all objects in the service section" ::= { polycom-endpointMIBGroups 2 } hardwareObjects OBJECT-GROUP OBJECTS { hardwareOverallStatus, hardwareMicrophoneStatus, hardwareMicrophoneMicrophonesIndex, hardwareMicrophoneMicrophonesName, hardwareMicrophoneMicrophonesStatus, hardwareCameraStatus, hardwareCameraCamerasIndex, hardwareCameraCamerasName, hardwareCameraCamerasStatus, hardwareNICStatus, hardwareNICNICsIndex, hardwareNICNICsName, hardwareNICNICsMAC, hardwareNICNICsSpeed, hardwareNICNICsDuplex, hardwareNICNICsStatus, hardwareNICNICsIPType, hardwarePTCStatus, hardwarePTCPTCsIndex, hardwarePTCPTCsStatus, hardwareUcBoardStatus, hardwareUcBoardUcBoardsIndex, hardwareUcBoardUcBoardsStatus } STATUS current DESCRIPTION "Contains all objects in the hardware section" ::= { polycom-endpointMIBGroups 3 } callObjects OBJECT-GROUP OBJECTS { callActiveCallsIndex, callActiveCallsCallID, callActiveCallsConfID, callActiveCallsVoiceJitterRX, callActiveCallsVoiceJitterTX, callActiveCallsVoiceLatencyRX, callActiveCallsVoiceLatencyTX, callActiveCallsVoicePacketLossRX, callActiveCallsVoicePacketLossTX, callActiveCallsVoiceProtocolRX, callActiveCallsVoiceProtocolTX, callActiveCallsMaxVoiceJitterRX, callActiveCallsMaxVoiceJitterTX, callActiveCallsTotalPacketsLostRX, callActiveCallsTotalPacketsLostTX, callActiveCallsPctPacketLostRX, callActiveCallsPctPacketLostTX, callActiveCallsOverallLatencyRX, callActiveCallsOverallLatencyTX, callActiveCallsOverallJitterRX, callActiveCallsOverallJitterTX, callActiveCallsContentFormatRsltnRX, callActiveCallsContentFormatRsltnTX, callActiveCallsContentFrameRateRX, callActiveCallsContentFrameRateTX, callActiveCallsContentJitterRX, callActiveCallsContentJitterTX, callActiveCallsContentLatencyRX, callActiveCallsContentLatencyTX, callActiveCallsContentPacketLossRX, callActiveCallsContentPacketLossTX, callActiveCallsContentProtocolRX, callActiveCallsContentProtocolTX, callActiveCallsContentRateRX, callActiveCallsContentRateTX, callActiveCallsContentRateUsedRX, callActiveCallsContentRateUsedTX, callActiveCallsVideoAnnexRX, callActiveCallsVideoAnnexTX, callActiveCallsVideoFECErrorsRX, callActiveCallsVideoFECErrorsTX, callActiveCallsVideoRsltnRX, callActiveCallsVideoRsltnTX, callActiveCallsVideoFrameRateRX, callActiveCallsVideoFrameRateTX, callActiveCallsVideoJitterRX, callActiveCallsVideoJitterTX, callActiveCallsVideoLatencyRX, callActiveCallsVideoLatencyTX, callActiveCallsVideoPacketLossRX, callActiveCallsVideoPacketLossTX, callActiveCallsVideoProtocolRX, callActiveCallsVideoProtocolTX, callActiveCallsVideoRateRX, callActiveCallsVideoRateTX, callActiveCallsVideoRateUsedRX, callActiveCallsVideoRateUsedTX, callActiveCallsFarSiteName, callActiveCallsFarSiteSystemType, callActiveCallsCallType, callActiveCallsEncryption, callActiveCallsPrecedenceLevel, callActiveCallsSendingContent } STATUS current DESCRIPTION "Contains all objects in the call section" ::= { polycom-endpointMIBGroups 4 } conferenceObjects OBJECT-GROUP OBJECTS { conferenceNumberActiveConferences } STATUS current DESCRIPTION "Contains all objects in the conference section" ::= { polycom-endpointMIBGroups 5 } externalIntegrationObjects OBJECT-GROUP OBJECTS { externalIntegrationStatus, externalIntegrationPresenceStatus, externalIntegrationCDRStatus, externalIntegrationSyslogStatus, externalIntegrationSoftwareUpdateStatus, externalIntegrationProvisioningStatus, externalIntegrationExchangeStatus, externalIntegrationExchangeServerIndex, externalIntegrationExchangeServerName, externalIntegrationExchangeServerIpAddress, externalIntegrationExchangeServerSubscriptionStatus, externalIntegrationExchangeServerMeetingsScheduledToday, externalIntegrationExchangeServerIntegrator, externalIntegrationDirectorySvcsStatus, externalIntegrationDirectorySvcsServerIndex, externalIntegrationDirectorySvcsServerStatus, externalIntegrationDirectorySvcsServerId, externalIntegrationDirectorySvcsServerCacheStatus, externalIntegrationDirectorySvcsServerConnectionSecure, externalIntegrationDirectorySvcsServerCacheRefreshDate, externalIntegrationDirectorySvcsServerEnterpriseConferenceRooms, externalIntegrationDirectorySvcsServerIntegrator } STATUS current DESCRIPTION "Contains all objects in the externalIntegration section" ::= { polycom-endpointMIBGroups 6 } notificationVariableObjects OBJECT-GROUP OBJECTS { notificationVariableNodeName, notificationVariableReportingNodeName, notificationVariableType, notificationVariableClass, notificationVariableKey, notificationVariableSummary, notificationVariableSeverity, notificationVariableValueOID, notificationVariableThreshold, notificationVariableConferenceID, notificationVariableServerName } STATUS current DESCRIPTION "Contains all objects in the notificationVariable section" ::= { polycom-endpointMIBGroups 7 } notificationObjects NOTIFICATION-GROUP NOTIFICATIONS { securityFailedAuthAttempt, securitySuccessfulAuthAttempt, securityAccountLocked, securityAccountUnlocked, securityConfigChange, softwareUpdateStarted, softwareUpdateComplete, softwareUpdateFailed, h323GateKeeperRegistrationFailed, h323GateKeeperRegistrationOK, sipRegistrationFailed, sipRegistrationOK, isdnLineDown, isdnLineUp, primaryCameraDown, primaryCameraOK, callConnected, callDisconnected, callFailed, jitterExcessive, jitterOK, latencyExcessive, latencyOK, packetLossExcessive, packetLossOK, presenceServerDown, presenceServerOK, cdrServerDown, cdrServerOK, syslogServerDown, syslogServerOK, softwareUpdateServerDown, softwareUpdateServerOK, provisioningServerDown, provisioningServerOK, calendarServerDown, calendarServerOK, directoryServerDown, directoryServerOK, remoteControlBatteryLow, remoteControlBatteryOK } STATUS current DESCRIPTION "Contains all of the notification objects" ::= { polycom-endpointMIBGroups 99 } END