-- Dot1x Advanced Features MIB overview: -- Dot1x Advanced Features MIB falls under lb6m MIB node of the private subtree. NETGEAR-DOT1X-ADVANCED-FEATURES-MIB DEFINITIONS ::= BEGIN -- Netgear Dot1x Advanced Features MIB -- Copyright Netgear Inc (2003-2007) All rights reserved. -- This SNMP Management Information Specification -- embodies Netgear Inc's confidential and proprietary -- intellectual property. Netgear Inc retains all title -- and ownership in the Specification including any revisions. -- This Specification is supplied "AS IS", Netgear Inc -- makes no warranty, either expressed or implied, -- as to the use, operation, condition, or performance of the -- Specification. IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Unsigned32, TimeTicks FROM SNMPv2-SMI dot1xPaePortNumber FROM IEEE8021-PAE-MIB TEXTUAL-CONVENTION, RowStatus,MacAddress,DateAndTime FROM SNMPv2-TC DisplayString FROM RFC1213-MIB lb6m FROM QUANTA-LB6M-REF-MIB; fastPathdot1xAdvanced MODULE-IDENTITY LAST-UPDATED "201101260000Z" -- 26 January 2011 12:00:00 GMT ORGANIZATION "Netgear Inc" CONTACT-INFO "" DESCRIPTION "The Netgear Private MIB for FastPath Dot1x Advanced Features " -- Revision history. REVISION "201101260000Z" -- 26 January 2011 12:00:00 GMT DESCRIPTION "Postal address updated." REVISION "200705230000Z" -- 23 May 2007 12:00:00 GMT DESCRIPTION "Netgear branding related changes." ::= { lb6m 36 } Dot1xPortControlMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The control values of the Authenticator PAE controlled Port." SYNTAX INTEGER { forceUnauthorized(1), auto(2), forceAuthorized(3), macBased(4) } Dot1xSessionTerminationAction ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The action to be taken on session termination ." SYNTAX INTEGER { default(1), reauthenticate(2) } agentDot1xEnhancementConfigGroup OBJECT IDENTIFIER ::= { fastPathdot1xAdvanced 1 } agentDot1xRadiusVlanAssignment OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable dot1x Vlan Assignment Support on the switch." DEFVAL { disable } ::= { agentDot1xEnhancementConfigGroup 1 } agentDot1xDynamicVlanCreationMode OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable dot1x dynamic vlan creation Support on the switch." DEFVAL { disable } ::= { agentDot1xEnhancementConfigGroup 2 } agentDot1xEapolFloodMode OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable dot1x eapol flooding mode on the switch." DEFVAL { disable } ::= { agentDot1xEnhancementConfigGroup 3 } --************************************************************************************** -- agentDot1xPortConfigGroup -> Contains MIB objects configuring/displaying Dot1x Port details -- and associated Functionality -- --************************************************************************************** agentDot1xPortConfigGroup OBJECT IDENTIFIER ::= { fastPathdot1xAdvanced 2 } -------------------------------------------------------------- -- The Dot1x Enhanced Port Table -------------------------------------------------------------- agentDot1xPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentDot1xPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table for dot1x enhanced Port details and associated functionality." ::= { agentDot1xPortConfigGroup 1 } agentDot1xPortConfigEntry OBJECT-TYPE SYNTAX AgentDot1xPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents entry for port config table." INDEX { dot1xPaePortNumber} ::= {agentDot1xPortConfigTable 1 } AgentDot1xPortConfigEntry ::= SEQUENCE { agentDot1xPortControlMode Dot1xPortControlMode, agentDot1xGuestVlanId Unsigned32, agentDot1xGuestVlanPeriod Unsigned32, agentDot1xUnauthenticatedVlan Unsigned32, agentDot1xMaxUsers Unsigned32, agentDot1xPortVlanAssigned Unsigned32, agentDot1xPortVlanAssignedReason INTEGER, agentDot1xPortSessionTimeout Unsigned32, agentDot1xPortTerminationAction Dot1xSessionTerminationAction, agentDot1xPortMABenabled INTEGER, agentDot1xPortMABenabledOperational INTEGER } agentDot1xPortControlMode OBJECT-TYPE SYNTAX Dot1xPortControlMode MAX-ACCESS read-write STATUS current DESCRIPTION "Dot1x port control mode of this port.The Port control mode . The port control mode for this interface can take the following values , force-unauthorized - the port is in unauthorized mode, auto-Port based mode. If a client authenticates suscessfully, then the interface is authorized . Otherwise, the port is in unauthorized mode. If more than one clients are attached to the port , then only one client needs to authenticate to allow other clients access. force-authorized - The port is placed in authorized mode macBased - If more than one client is attached to the port, then each client needs to authenticate separately. This object depcreates dot1xAuthAuthControlledPortControl object in IEEE8021-PAE-MIB" DEFVAL {auto} ::= { agentDot1xPortConfigEntry 1} agentDot1xGuestVlanId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the Guest Vlan of the port. A port will be moved to its Guest Vlan if no client sucessfully authenticates on that port for the Guest Vlan Period. A value of zero indicates no Guest Vlan is configured for the interface." DEFVAL {0} ::= { agentDot1xPortConfigEntry 2} agentDot1xGuestVlanPeriod OBJECT-TYPE SYNTAX Unsigned32 (1..300) MAX-ACCESS read-write STATUS current DESCRIPTION "The value, in seconds, of the guestVlanPeriod constant currently in use for Guest Vlan Assignment for the port ." DEFVAL { 90 } ::= { agentDot1xPortConfigEntry 3 } agentDot1xUnauthenticatedVlan OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the Unauthenticated Vlan of the port. A port will be moved to its unauthenticated Vlan if the client authenticates unsucessfully on that port . A value of zero indicates no Unauthenticated Vlan is configured for the port. " DEFVAL {0} ::= { agentDot1xPortConfigEntry 4} agentDot1xMaxUsers OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION " Specifies the maximum users or clients that can authenticate on this port when the port control mode is macBased. " ::= { agentDot1xPortConfigEntry 5} agentDot1xPortVlanAssigned OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Specifies the vlan the port is assigned to by Dot1x . Only relevant if the port control mode of the port is auto. " DEFVAL {0} ::= { agentDot1xPortConfigEntry 6} agentDot1xPortVlanAssignedReason OBJECT-TYPE SYNTAX INTEGER { default(1), radius(2), unauthenticatedVlan(3), guestVlan(4), voiceVlan(5), monitorVlan(6), notAssigned(7) } MAX-ACCESS read-only STATUS current DESCRIPTION " Reason the port is assigned to the vlan specified by agentDot1xPortVlanAssigned . Only relevant if the port control mode of the port is auto. " DEFVAL {5} ::= { agentDot1xPortConfigEntry 7} agentDot1xPortSessionTimeout OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Specifies the session timeout value assigned by the Radius server for this port . Only relevant if the port control mode of the port is auto. " ::= { agentDot1xPortConfigEntry 8} agentDot1xPortTerminationAction OBJECT-TYPE SYNTAX Dot1xSessionTerminationAction MAX-ACCESS read-only STATUS current DESCRIPTION " Specifies the session termination action assigned by the Radius Server .This is the action taken when the session times out . Only relevant if the port control mode of the port is auto. " DEFVAL {1} ::= { agentDot1xPortConfigEntry 9} agentDot1xPortMABenabled OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Specifies if Mac-based bypass authentication is configured for the port. " DEFVAL {2} ::= { agentDot1xPortConfigEntry 10} agentDot1xPortMABenabledOperational OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " Displays the operational value of the Mac-based authentication bypass mode (MAB) on the port. " DEFVAL {2} ::= { agentDot1xPortConfigEntry 11} --************************************************************************************** -- agentDot1xClientConfigGroup -> Contains MIB objects displaying Dot1x Client details and -- associated Functionality -- --************************************************************************************** agentDot1xClientConfigGroup OBJECT IDENTIFIER ::= { fastPathdot1xAdvanced 3 } agentDot1xClientConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentDot1xClientConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table for dot1x Client details and associated functionality." ::= { agentDot1xClientConfigGroup 1 } agentDot1xClientConfigEntry OBJECT-TYPE SYNTAX AgentDot1xClientConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents entry for port config table." INDEX { agentDot1xClientMacAddress} ::= {agentDot1xClientConfigTable 1 } AgentDot1xClientConfigEntry ::= SEQUENCE { agentDot1xClientMacAddress MacAddress, agentDot1xLogicalPort Unsigned32, agentDot1xInterface Unsigned32, agentDot1xClientAuthPAEstate INTEGER, agentDot1xClientBackendState INTEGER, agentDot1xClientUserName DisplayString, agentDot1xClientSessionTime Unsigned32, agentDot1xClientFilterID DisplayString, agentDot1xClientVlanAssigned Unsigned32, agentDot1xClientVlanAssignedReason INTEGER, agentDot1xClientSessionTimeout Unsigned32, agentDot1xClientTerminationAction Dot1xSessionTerminationAction } agentDot1xClientMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the client MAC address of the client. " ::= { agentDot1xClientConfigEntry 1} agentDot1xLogicalPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the client MAC address of the client . " ::= { agentDot1xClientConfigEntry 2} agentDot1xInterface OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the physical interface to which the client is attached . " ::= { agentDot1xClientConfigEntry 3} agentDot1xClientAuthPAEstate OBJECT-TYPE SYNTAX INTEGER { initialize(1), disconnected(2), connecting(3), authenticating(4), authenticated(5), aborting(6), held(7), forceAuth(8), forceUnauth(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current value of the Authenticator PAE state machine for the client." ::={ agentDot1xClientConfigEntry 4} agentDot1xClientBackendState OBJECT-TYPE SYNTAX INTEGER { request(1), response(2), success(3), fail(4), timeout(5), idle(6), initialize(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the Backend Authentication state machine." ::={ agentDot1xClientConfigEntry 5} agentDot1xClientUserName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the username with which the client is authenticated to the Radius server . This value is only valid when the client is in authenticated state. " ::= { agentDot1xClientConfigEntry 6} agentDot1xClientSessionTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the time elapsed in seconds since the client was authenticated in this session. This value is only valid when the client is in authenticated state. " ::= { agentDot1xClientConfigEntry 7} agentDot1xClientFilterID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the Filter ID or Diffserv Policy name to be applied to the session . This vlaue is populated only if it has been assigned by the RADIUS server. This value is only valid when the client is in authenticated state." ::= { agentDot1xClientConfigEntry 8} agentDot1xClientVlanAssigned OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the vlan the client is associated with by Dot1x . This value is only valid when the client is in authenticated state." ::= { agentDot1xClientConfigEntry 9} agentDot1xClientVlanAssignedReason OBJECT-TYPE SYNTAX INTEGER { default(1), radius(2), unauthenticatedVlan(3), monitorVlan(6), invalid(7) } MAX-ACCESS read-only STATUS current DESCRIPTION " Reason the client is associated to the vlan specified by agentDot1xClientVlanAssigned . This value is only valid when the client is in authenticated state." ::= { agentDot1xClientConfigEntry 10} agentDot1xClientSessionTimeout OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the session time remaining for the client if assigned by the Radius server . A value of 0 indicates that no session timeout was assigned by the RADIUS server. This value is only valid when the client is in authenticated state. " ::= { agentDot1xClientConfigEntry 11} agentDot1xClientTerminationAction OBJECT-TYPE SYNTAX Dot1xSessionTerminationAction MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the session termination action assigned by the Radius Server . This is the action taken when the session times out . This value is only valid when the client is in authenticated state. " ::= { agentDot1xClientConfigEntry 12} --************************************************************************************** -- agentDot1xMonitorModeConfigGroup -> Contains MIB objects configuring/displaying Dot1x -- Monitor Mode details and associated Functionality -- --************************************************************************************** agentDot1xMonitorModeConfigGroup OBJECT IDENTIFIER ::= { fastPathdot1xAdvanced 4 } agentDot1xMonitorModeEnabled OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable Dot1x Monitor mode Support on the switch." DEFVAL { disable } ::= { agentDot1xMonitorModeConfigGroup 1 } agentDot1xMonitorModeClients OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Retrieves the number of clients that got authenticated by Monitor mode globally." ::= { agentDot1xMonitorModeConfigGroup 2 } agentDot1xNonMonitorModeClients OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Retrieves the number of clients that are granted access by Dot1x with no monitor mode enabled." ::= { agentDot1xMonitorModeConfigGroup 3 } --************************************************************************************** -- agentDot1xMonitorModeConfigGroup -> Contains MIB objects configuring/displaying Dot1x -- Monitor Mode details and associated Functionality -- --************************************************************************************** agentDot1xAuthHistoryResultsGroup OBJECT IDENTIFIER ::= { fastPathdot1xAdvanced 5 } agentDot1xPortAuthHistoryResultTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentDot1xPortAuthHistoryResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table to display the dot1x monitor mode results." ::= { agentDot1xAuthHistoryResultsGroup 1 } agentDot1xPortAuthHistoryResultEntry OBJECT-TYPE SYNTAX AgentDot1xPortAuthHistoryResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents Dot1x Authentication results for a Dot1x Authentication History table." INDEX { agentDot1xAuthHistoryResultIfaceIndex, agentDot1xAuthHistoryResultIndex} ::= {agentDot1xPortAuthHistoryResultTable 1 } AgentDot1xPortAuthHistoryResultEntry ::= SEQUENCE { agentDot1xAuthHistoryResultIfaceIndex Unsigned32, agentDot1xAuthHistoryResultIndex Unsigned32, agentDot1xAuthHistoryResultTimeStamp DateAndTime, agentDot1xAuthHistoryResultAge TimeTicks, agentDot1xAuthHistoryResultMacAddress MacAddress, agentDot1xAuthHistoryResultVlanId Unsigned32, agentDot1xAuthHistoryResultAuthStatus INTEGER, agentDot1xAuthHistoryResultAccessStatus INTEGER, agentDot1xAuthHistoryResultFilterID DisplayString, agentDot1xAuthHistoryResultVlanAssigned Unsigned32, agentDot1xAuthHistoryResultVlanAssignedType INTEGER, agentDot1xAuthHistoryResultReasonCode INTEGER } agentDot1xAuthHistoryResultIfaceIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the physical Bridge Port on which dot1x Auth event might be received." ::= { agentDot1xPortAuthHistoryResultEntry 1 } agentDot1xAuthHistoryResultIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Reference to the Dot1x Authentication history table maintained." ::= { agentDot1xPortAuthHistoryResultEntry 2 } agentDot1xAuthHistoryResultTimeStamp OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the exact time of Dot1x Authentication event information occurred maintained in the history table." ::= { agentDot1xPortAuthHistoryResultEntry 3 } agentDot1xAuthHistoryResultAge OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time since the authentication entry was added to the history table. It is displayed in days, hours, minutes, and seconds." ::= { agentDot1xPortAuthHistoryResultEntry 4 } agentDot1xAuthHistoryResultMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the client MAC Address maintained in the Dot1x Authentication history table." ::= { agentDot1xPortAuthHistoryResultEntry 5 } agentDot1xAuthHistoryResultVlanId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the VLANID maintained in the history table. It is the VLANID which is failed to associate to the port during authentication process. The VLANID is identified distinctly by the Reason code for the respective entry. Valid only when the reason code is set to 13 (VLAN assignment failure). In all the other cases, VLANID is set to 0. " ::= { agentDot1xPortAuthHistoryResultEntry 6 } agentDot1xAuthHistoryResultAuthStatus OBJECT-TYPE SYNTAX INTEGER { success(1), failure(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the Dot1x Authentication status (Success or Failure) for the Dot1x Authentication event takes place. " ::= { agentDot1xPortAuthHistoryResultEntry 7 } agentDot1xAuthHistoryResultAccessStatus OBJECT-TYPE SYNTAX INTEGER { granted(1), denied(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " Authentication access status indicates the exact status of the dot1x client. Granted means the client is allowed access to the network using dot1x or monitor mode. Denied means the client is not allowed access to the network." ::= { agentDot1xPortAuthHistoryResultEntry 8 } agentDot1xAuthHistoryResultFilterID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the Filter ID or Diffserv Policy name assigned by the RADIUS server. This value is only valid when the client is in authenticated state." ::= { agentDot1xPortAuthHistoryResultEntry 9 } agentDot1xAuthHistoryResultVlanAssigned OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the VLANID maintained in the history table (It is the VLANID Assigned to a Port or Client authenticate)." ::= { agentDot1xPortAuthHistoryResultEntry 10 } agentDot1xAuthHistoryResultVlanAssignedType OBJECT-TYPE SYNTAX INTEGER { default(1), radius(2), unauthenticatedVlan(3), guestVlan(4), voiceVlan(5), monitorVlan(6), notAssigned(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the VLAN Assigned Reason maintained in the history table." ::= { agentDot1xPortAuthHistoryResultEntry 11 } agentDot1xAuthHistoryResultReasonCode OBJECT-TYPE SYNTAX INTEGER { supplicant-timeout(1), eapol-timeout(2), radius-request-timeout(3), radius-auth-failure(4), radius-auth-comm-failure(5), radius-challenge-process-invalid-nas-port(6), radius-challenge-process-wrong-eap-msg(7), radius-request-send-msg-error(8), radius-accept-process-invalid-nas-port(9), radius-accept-process-wrong-eap-msg(10), radius-accept-filter-assignment-failure(11), radius-accept-diffserv-not-present(12), radius-accept-vlan-assignment-failure(13), vlan-assignment-feature-not-enabled(14), radius-success(15), local-auth-user-not-found(16), local-auth-user-no-access(17), local-auth-md5-validation-failure(18), local-auth-invalid-eap-type(19), local-failure(20), local-success(21), radius-invalid-radius-status(22), guest-vlan-timer-expiry(23), undefined-auth-method(24), reject-auth-method(25), invalid-auth-method(26), auth-method-not-configured(27), unauth-vlan-not-created(28), guest-vlan-not-created(29), radius-accept-invalid-vlan-failure(30) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the Dot1x authentication reason refered by the result index on a port." ::= { agentDot1xPortAuthHistoryResultEntry 12 } agentDot1xAuthHistoryResultsClear OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When set to enable(1), all Dot1x Authentication History information will be reset." DEFVAL { disable } ::= { agentDot1xAuthHistoryResultsGroup 2 } --************************************************************************************** -- agentDot1xPortAuthHistoryResultClearTable -- --************************************************************************************** agentDot1xPortAuthHistoryResultClearTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentDot1xPortAuthHistoryResultClearEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table to clear the dot1x monitor mode results per interface." ::= { agentDot1xAuthHistoryResultsGroup 3 } agentDot1xPortAuthHistoryResultClearEntry OBJECT-TYPE SYNTAX AgentDot1xPortAuthHistoryResultClearEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents to clear the Dot1x Authentication results for a Dot1x Authentication History table." INDEX { agentDot1xAuthHistoryResultIfIndex } ::= {agentDot1xPortAuthHistoryResultClearTable 1 } AgentDot1xPortAuthHistoryResultClearEntry ::= SEQUENCE { agentDot1xAuthHistoryResultIfIndex Unsigned32, agentDot1xPortAuthHistoryResultsClear INTEGER } agentDot1xAuthHistoryResultIfIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the physical Bridge Port on which dot1x Auth event might be received." ::= { agentDot1xPortAuthHistoryResultClearEntry 1 } agentDot1xPortAuthHistoryResultsClear OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When set to enable(1), all Dot1x Authentication History information for the given port will be reset. The value is write-only. Attempt to read will return disable(2)." DEFVAL { disable } ::= { agentDot1xPortAuthHistoryResultClearEntry 2 } END