NETGEAR-UDLD-MIB DEFINITIONS ::= BEGIN

-- Netgear Switching MIB
-- Copyright Netgear Inc (2007) All rights reserved.

-- This SNMP Management Information Specification
-- embodies Netgear Inc's confidential and proprietary
-- intellectual property. Netgear Inc retains all title
-- and ownership in the Specification including any revisions.

-- This Specification is supplied "AS IS", Netgear Inc
-- makes no warranty, either expressed or implied,
-- as to the use, operation, condition, or performance of the
-- Specification.

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32                 FROM SNMPv2-SMI
    TEXTUAL-CONVENTION, TruthValue                                      FROM SNMPv2-TC
    lb6m                                                            FROM QUANTA-LB6M-REF-MIB
    DisplayString                                                       FROM RFC1213-MIB
    ifIndex                                                             FROM IF-MIB;
   
    fastPathUdld MODULE-IDENTITY
        LAST-UPDATED "200712030000Z" -- 03 December 2007 12:00:00 GMT
        ORGANIZATION "Netgear Inc"
        CONTACT-INFO ""
        DESCRIPTION
          "The Netgear Private MIB for FastPath UDLD."

        -- Revision history.
        REVISION
          "200802240000Z" -- 22 February 2008 12:00:00 GMT
        DESCRIPTION
          "Initial version."
        ::= { lb6m 54 }

agentUdldMIBObjects  OBJECT IDENTIFIER ::= { fastPathUdld 1 }
agentUdldGlobal      OBJECT IDENTIFIER ::= { agentUdldMIBObjects 1 }
agentUdldInterface   OBJECT IDENTIFIER ::= { agentUdldMIBObjects 2 }

-- ***************************************************************************
--
-- The UDLD Global Group
-- Manage Global UDLD settings.
--
-- ***************************************************************************

agentUdldGlobalMode OBJECT-TYPE
     SYNTAX      INTEGER {
                          enable(1),
                          disable(2)
                 } 
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION
                "Indicates the mode of UDLDP feature on the device.
                 enable -- Unidirectional Link Detection Protocol is 
                           enabled on the device.

                 disable -- Unidirectional Link Detection Protocol is
                            disabled on the device."
        ::= { agentUdldGlobal 1 }
        
agentUdldMessageInterval OBJECT-TYPE
        SYNTAX      INTEGER  (7..90)
        UNITS       "seconds"
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
                    "Indicates interval in seconds at which each port
                     sends a packet to all of its neighbors at
                     steady state when the link has been identified as
                     bidirectional."
        ::= { agentUdldGlobal 2 }
        
agentUdldTimeoutInterval OBJECT-TYPE
        SYNTAX      INTEGER  (5..60)
        UNITS       "seconds"
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
                    "Indicates Timeout interval in seconds."
        ::= { agentUdldGlobal 3 }

agentUdldReset OBJECT-TYPE
    SYNTAX      INTEGER {
                normalOperation(0),
                reset(1)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "Resets all interfaces that have been shutdown by UDLD. On read OID will always be 0."
    ::= { agentUdldGlobal  4 }

-- ****************************************************************************
--
-- The UDLD Interface Group
-- Manage UDLD on interface.
--
-- ****************************************************************************

agentUdldInterfaceTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF UdldInterfaceEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
                "The table containing the status 
                 of UDLDP on the device's interfaces."
        ::= { agentUdldInterface 1 }

agentUdldInterfaceEntry OBJECT-TYPE
        SYNTAX      UdldInterfaceEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
                  " An entry exists for each interface that supports 
                   UDLDP."
        INDEX { ifIndex }
        ::= { agentUdldInterfaceTable 1 }

UdldInterfaceEntry ::= SEQUENCE {
      agentUdldInterfaceOperStatus     INTEGER,
      agentUdldInterfaceAdminMode      INTEGER,
      agentUdldInterfaceAggresiveMode  TruthValue
}

agentUdldInterfaceOperStatus OBJECT-TYPE
        SYNTAX        INTEGER {
                                shutdown(1), 
                                undetermined(2),
                                biDirectional(3), 
                                notApplicable(4),
                                undetermined-LinkDown(5)
                              }
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION
               " This mib object contains the following values,
                 which has the meaning as:
                 'shutdown'      - An Unidirectional link  has been 
                                   detected and the port has been disabled.
                 'undetermined'  - Unidirectional Link Detection  
                                   protocol has not collected enough
                                   information to determine if the 
                                   link is bidirectional or not.
                 'biDirectional' - A bidirectional link has been 
                                   detected.
                 'notApplicable' - Unidirectional Link Detection 
                                   Protocol is disabled. 
                 'undetermined-LinkDown' - The port would transition into 
                                   this state when the port link physically 
                                   goes down due to any reasons other than 
                                   the port been put into D-Disable mode
                                   by UDLD protocol on the switch.
                "
        ::= { agentUdldInterfaceEntry 1}

agentUdldInterfaceAdminMode  OBJECT-TYPE
        SYNTAX        INTEGER {
                          enable(1),
                          disable(2)
                      }
        MAX-ACCESS    read-write
        STATUS        current
        DESCRIPTION
                "Indicates the Administrative mode of Unidirectional 
                 Link Detection Protocol Feature configured on this 
                 interface.
                 
                 enable -- Unidirectional Link Detection Protocol is 
                           enabled on this interface.

                 disable -- Unidirectional Link Detection Protocol is
                            disabled on this interface."
        ::= { agentUdldInterfaceEntry 2}

agentUdldInterfaceAggresiveMode OBJECT-TYPE
     SYNTAX      TruthValue 
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION
                "Indicates the mode of UDLDP feature on the interface.
                 TRUE -- Aggressive mode is enabled on the interface.

                 FALSE -- Aggressive mode is disabled on the interface."

        ::= { agentUdldInterfaceEntry 3}

END