NETGEAR-ROUTE-POLICY-MIB DEFINITIONS ::= BEGIN

-- Netgear Inc Route-Map MIB
-- Copyright Netgear Inc (200x-2012) All rights reserved.

-- This SNMP Management Information Specification
-- embodies Netgear Inc's confidential and proprietary
-- intellectual property.  Netgear Inc retains all title
-- and ownership in the Specification including any revisions.

-- This Specification is supplied "AS IS", Netgear Inc
-- makes no warranty, either expressed or implied,
-- as to the use, operation, condition, or performance of the
-- Specification.


IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
    Unsigned32 FROM SNMPv2-SMI
    TEXTUAL-CONVENTION, TruthValue, RowStatus FROM SNMPv2-TC
    DisplayString                        FROM RFC1213-MIB
    ifIndex, InterfaceIndex, InterfaceIndexOrZero
                                        FROM IF-MIB
    fastPathRouting                      FROM NETGEAR-ROUTING-MIB;

    fastPathRoutePolicy MODULE-IDENTITY
        LAST-UPDATED "201210010000Z" -- 01 0ctober 2012 12:00:00 GMT
        ORGANIZATION "Netgear Inc"
        CONTACT-INFO ""
        DESCRIPTION
          "The MIB definitions for Route Policy system."
    ::= { fastPathRouting 20 }


-- Textual Convention
   FastpathRoutePolicyAction ::= TEXTUAL-CONVENTION
      STATUS current
      DESCRIPTION
          "Determines whether a Route Map statement
           should be permitted or denied."
      SYNTAX INTEGER {
          permit(1),
          deny(2)
    }
   FastpathRoutePolicyStmtIpPrecedence ::= TEXTUAL-CONVENTION
      STATUS current
      DESCRIPTION
          "Possible values of IP precedence that can be
           configured in a route-map statement."
      SYNTAX INTEGER {
          routine(0),
          priority(1),
          immediate(2),
          flash(3),
          flash-override(4),
          critical(5),
          internet(6),
          network(7),
          invalid(8) 
    }

-- fastpath route policy name table. We create a Route-map statement through this table.

   fastpathRoutePolicyNameTable OBJECT-TYPE
      SYNTAX      SEQUENCE OF FastpathRoutePolicyNameEntry
      MAX-ACCESS  not-accessible
      STATUS      current
      DESCRIPTION
          "Table to configure or fetch current list of route-map statements"
   ::= { fastPathRoutePolicy  1}

   fastpathRoutePolicyNameEntry OBJECT-TYPE
      SYNTAX      FastpathRoutePolicyNameEntry
      MAX-ACCESS  not-accessible
      STATUS      current
      DESCRIPTION
          "Each entry in this table corresponds to a route-map statement"
      INDEX {fastpathRoutePolicyName,fastpathRoutePolicyStmtActionType,fastpathRoutePolicySequence}                 
    ::= { fastpathRoutePolicyNameTable 1 }

   FastpathRoutePolicyNameEntry::= SEQUENCE {
    fastpathRoutePolicyName                  DisplayString,
    fastpathRoutePolicyStmtActionType        FastpathRoutePolicyAction,
    fastpathRoutePolicySequence              Unsigned32,
    fastpathRoutePolicyNameRowStatus         RowStatus
   }

  fastpathRoutePolicyName OBJECT-TYPE
     SYNTAX      DisplayString (SIZE(1..32))
     MAX-ACCESS  read-create
     STATUS  current
     DESCRIPTION
         "The name of a Route Map statement."
  ::= { fastpathRoutePolicyNameEntry 1 }

fastpathRoutePolicyStmtActionType OBJECT-TYPE
    SYNTAX      FastpathRoutePolicyAction
    MAX-ACCESS   read-create
    STATUS  current
    DESCRIPTION
        "The action associated with this route-map statement.
         This can be either Permit/Deny  "
    ::= { fastpathRoutePolicyNameEntry 2 }

fastpathRoutePolicySequence OBJECT-TYPE
    SYNTAX       Unsigned32 (0..65535)
    MAX-ACCESS   read-create
    STATUS  current
    DESCRIPTION
        "Route Maps are linked together using sequence numbers.
         All Route Maps with the same index and with different
         sequence numbers are linked together and processed in
         order of increasing sequence number."
    ::= { fastpathRoutePolicyNameEntry 3 }

  fastpathRoutePolicyNameRowStatus OBJECT-TYPE
     SYNTAX      RowStatus
     MAX-ACCESS  read-create
     STATUS  current
     DESCRIPTION
         "Controls creation and deletion of Row Status entries."
  ::= { fastpathRoutePolicyNameEntry 4 }


--*********************************************************************
--route-map statement table to configure 'match' or 'set' terms
--*********************************************************************
  fastpathRoutePolicyStamentTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF FastpathRoutePolicyStatementEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Table to configure match or set statements in a route-map statement."
    ::= { fastPathRoutePolicy  2 }

fastpathRoutePolicyStatementEntry OBJECT-TYPE
    SYNTAX      FastpathRoutePolicyStatementEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry describes match and set terms in a route-map statement if configured"
    INDEX {fastpathRoutePolicyStmtName,fastpathRoutePolicyStmtSeqNum,fastpathRoutePolicyStmtAction}
    ::= { fastpathRoutePolicyStamentTable 1 }

FastpathRoutePolicyStatementEntry::= SEQUENCE {
    fastpathRoutePolicyStmtName                       DisplayString,
    fastpathRoutePolicyStmtSeqNum                     Unsigned32,
    fastpathRoutePolicyStmtAction                     FastpathRoutePolicyAction,
    fastpathRoutePolicyStmtMatchIpv4AclList           DisplayString,
    fastpathRoutePolicyStmtMatchIpv4AclDelList        DisplayString,
    fastpathRoutePolicyStmtMatchMacAclList            DisplayString,
    fastpathRoutePolicyStmtMatchMacAclDelList         DisplayString,
    fastpathRoutePolicyStmtMatchPacketLengthRangeMin  Unsigned32,
    fastpathRoutePolicyStmtMatchPacketLengthRangeMax  Unsigned32,
    fastpathRoutePolicyStmtSetIpNextHopList           DisplayString,
    fastpathRoutePolicyStmtSetIpNextHopDelList        DisplayString,
    fastpathRoutePolicyStmtSetDefaultIpNextHopList    DisplayString,
    fastpathRoutePolicyStmtSetDefaultIpNextHopDelList DisplayString,
    fastpathRoutePolicyStmtSetIpPrecedence            FastpathRoutePolicyStmtIpPrecedence,
    fastpathRoutePolicyStmtSetIntfNull0               TruthValue   
  }

 fastpathRoutePolicyStmtName OBJECT-TYPE
     SYNTAX      DisplayString (SIZE(1..31))
     MAX-ACCESS  not-accessible 
     STATUS  current
     DESCRIPTION
         "The name of a Route Map."
  ::= { fastpathRoutePolicyStatementEntry 1 }

  fastpathRoutePolicyStmtSeqNum OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible 
    STATUS  current
    DESCRIPTION
        "Route Maps are linked together using sequence numbers.
         All Route Maps with the same index and with different
         sequence numbers are linked together and processed in
         order of increasing sequence number."
    ::= { fastpathRoutePolicyStatementEntry 2 }

  fastpathRoutePolicyStmtAction OBJECT-TYPE
    SYNTAX      FastpathRoutePolicyAction
    MAX-ACCESS  not-accessible 
    STATUS  current
    DESCRIPTION
        "The action associated with this route-map statement.
         This can be either Permit/Deny  "
    ::= { fastpathRoutePolicyStatementEntry 3 }

  fastpathRoutePolicyStmtMatchIpv4AclList OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The string containing a list of IPv4 ACLs. This
         list contains either IPV4 standard ACL/IPV4 extended
         ACL/ named IPv4 ACL. In a single match statement,
         up to a maximum of 16 IPV4 ACLs can be included. "
    ::= { fastpathRoutePolicyStatementEntry 4 }

  fastpathRoutePolicyStmtMatchIpv4AclDelList OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The string containing a list of IPv4 ACLs. This
         list contains either IPV4 standard ACL/IPV4 extended
         ACL/ named IPv4 ACL. In a single match statement,
         up to a maximum of 16 IPV4 ACLs can be included.This
         list is used to delete already configured match list
         of IPv4 ACLs in route-map statement.Earlier this list
         should have configured through MIB object 
         fastpathRoutePolicyStmtMatchIpv4AclList  "
    ::= { fastpathRoutePolicyStatementEntry 5 }

  fastpathRoutePolicyStmtMatchMacAclList OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The string containing a list of MAC ACLs. This
         list contains upto 16 MAC ACL names that can be
         included in a match statement. "
    ::= { fastpathRoutePolicyStatementEntry 6 }

  fastpathRoutePolicyStmtMatchMacAclDelList OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The string containing a list of MAC ACLs. This
         list contains upto 16 MAC ACL names that can be
         included in a match statement. This MIB object is 
         used to delete MAC ACL lists matched in a route-map
         statement via fastpathRoutePolicyStmtMatchMacAclList. "
    ::= { fastpathRoutePolicyStatementEntry 7 }

  fastpathRoutePolicyStmtMatchPacketLengthRangeMin OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Minimum value in the packet length range in a match
         length term. A value of zero is used to disable/remove
         minimum length configuration. "
    ::= { fastpathRoutePolicyStatementEntry 8}

  fastpathRoutePolicyStmtMatchPacketLengthRangeMax OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Maximum value in the packet length range in a match
         length term. A value of zero is used to disable/remove
         maximum length configuration.  "
    ::= { fastpathRoutePolicyStatementEntry 9 }

  fastpathRoutePolicyStmtSetIpNextHopList OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The string containing a list of next-hop IP addresses.
         Upto a maximum of 16 IP addresses can be specified "
    ::= { fastpathRoutePolicyStatementEntry 10 }

  fastpathRoutePolicyStmtSetIpNextHopDelList OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The string containing a list of next-hop IP addresses.
         Upto a maximum of 16 IP addresses can be specified.This
         MIB object is used to delete IP next-hop list configured
         via fastpathRoutePolicyStmtSetIpNextHopList "
    ::= { fastpathRoutePolicyStatementEntry 11 }

  fastpathRoutePolicyStmtSetDefaultIpNextHopList OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The string containing a list of default next-hop IP addresses.
         Upto a maximum of 16 IP addresses can be specified "
    ::= { fastpathRoutePolicyStatementEntry 12 }

  fastpathRoutePolicyStmtSetDefaultIpNextHopDelList OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The string containing a list of default next-hop IP addresses.
         Upto a maximum of 16 IP addresses can be specified.This MIB
         object is used to delete IP default next-hop list configured
         via fastpathRoutePolicyStmtSetDefaultIpNextHopList "
    ::= { fastpathRoutePolicyStatementEntry 13 }

  fastpathRoutePolicyStmtSetIpPrecedence OBJECT-TYPE
    SYNTAX      FastpathRoutePolicyStmtIpPrecedence
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "IP Precedence value to be remarked. This is specified through
         set clause in route-map statement. In order to remove configured precedence value,
         use invalid(8) option. "
    ::= { fastpathRoutePolicyStatementEntry 14 } 
  
   fastpathRoutePolicyStmtSetIntfNull0 OBJECT-TYPE
         SYNTAX      TruthValue
         MAX-ACCESS  read-write
         STATUS      current
         DESCRIPTION
                     "Specifying null0 as an interface in a route-map 
                      statement" 
   ::= { fastpathRoutePolicyStatementEntry 15 }

--******************************************************************************
--Applying Route Maps to interface

--*******************************************************************************
fastpathRoutePolicyIfTable OBJECT-TYPE
         SYNTAX      SEQUENCE OF FastpathRoutePolicyIfEntry
         MAX-ACCESS  not-accessible
         STATUS      current
         DESCRIPTION
                     "A table of interfaces on which route-map is applied."
         ::= { fastPathRoutePolicy  3 }

fastpathRoutePolicyIfEntry OBJECT-TYPE
         SYNTAX      FastpathRoutePolicyIfEntry
         MAX-ACCESS  not-accessible
         STATUS      current
         DESCRIPTION
                     ""
         INDEX       { fastpathRoutePolicyIfIndex,fastpathRoutePolicyIfName}
         ::= { fastpathRoutePolicyIfTable 1 }

FastpathRoutePolicyIfEntry::= SEQUENCE {
    fastpathRoutePolicyIfIndex      InterfaceIndex,
    fastpathRoutePolicyIfName       DisplayString,
    fastpathRoutePolicyIfRowStatus  RowStatus 
  }

  fastpathRoutePolicyIfIndex OBJECT-TYPE
     SYNTAX     InterfaceIndex 
     MAX-ACCESS  read-create
     STATUS  current
     DESCRIPTION
         "Interface to which route-map needs to be applied or Interface from which route-map needs to be removed."
  ::= { fastpathRoutePolicyIfEntry 1 }

  fastpathRoutePolicyIfName OBJECT-TYPE
     SYNTAX      DisplayString (SIZE(1..31))
     MAX-ACCESS  read-create
     STATUS  current
     DESCRIPTION
         "The name of a Route Map."
  ::= { fastpathRoutePolicyIfEntry 2 }

fastpathRoutePolicyIfRowStatus  OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "Controls creation and deletion of Row Status entries."
    ::= { fastpathRoutePolicyIfEntry 3 }
END