NETGEAR-ROUTING6-MIB DEFINITIONS ::= BEGIN -- Netgear Routing MIB -- Copyright Netgear Inc (2007) All rights reserved. -- This SNMP Management Information Specification -- embodies Netgear Inc's confidential and proprietary -- intellectual property. Netgear Inc retains all title -- and ownership in the Specification including any revisions. -- This Specification is supplied "AS IS", Netgear Inc -- makes no warranty, either expressed or implied, -- as to the use, operation, condition, or performance of the -- Specification. IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Counter32, Unsigned32, Integer32, Gauge32 FROM SNMPv2-SMI DisplayString, PhysAddress, TruthValue, TimeStamp, VariablePointer, RowPointer, RowStatus, MacAddress FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF Ipv6IfIndex, Ipv6Address, Ipv6AddressPrefix, Ipv6AddressIfIdentifier, Ipv6IfIndexOrZero FROM IPV6-TC lb6m FROM QUANTA-LB6M-REF-MIB; fastPathRoutingIpv6 MODULE-IDENTITY LAST-UPDATED "201101260000Z" -- 26 Jan 2011 12:00:00 GMT ORGANIZATION "Netgear Inc" CONTACT-INFO "" DESCRIPTION "The Netgear Private MIB for FastPath Ipv6 Routing" -- Revision history. REVISION "201101260000Z" -- 26 Jan 2011 12:00:00 GMT DESCRIPTION "Postal address updated." REVISION "200705230000Z" -- 23 May 2007 12:00:00 GMT DESCRIPTION "Netgear branding related changes." REVISION "200509211700Z" -- 21 Sept 2005 12:00 PM EST DESCRIPTION "Updated for release" ::= { lb6m 30 } --************************************************************************************** -- agentIpv6Group -- --************************************************************************************** agentIpv6Group OBJECT IDENTIFIER ::= { fastPathRoutingIpv6 1 } agentIpv6RoutingMode OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Administratively enables/disables ipv6 unicast routing on the switch." ::= { agentIpv6Group 1 } --************************************************************************************** -- agentIpv6InterfaceTable -- --************************************************************************************** agentIpv6InterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentIpv6InterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { agentIpv6Group 2 } agentIpv6InterfaceEntry OBJECT-TYPE SYNTAX AgentIpv6InterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { agentIpv6InterfaceIfIndex } ::= { agentIpv6InterfaceTable 1 } AgentIpv6InterfaceEntry ::= SEQUENCE { agentIpv6InterfaceIfIndex Integer32, agentIpv6InterfaceMtuValue Unsigned32, agentIpv6InterfaceDadTransmits Integer32, agentIpv6InterfaceLinkLocalOnly INTEGER, agentIpv6InterfaceIcmpUnreachables INTEGER, agentIpv6InterfaceAutoconfig INTEGER, agentIpv6InterfaceDhcpClient INTEGER, agentIpv6InterfaceIcmpRedirects INTEGER } agentIpv6InterfaceIfIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The IfIndex associated with this instance." ::= { agentIpv6InterfaceEntry 1 } agentIpv6InterfaceMtuValue OBJECT-TYPE SYNTAX Unsigned32 (0|1280..1500) MAX-ACCESS read-write STATUS current DESCRIPTION "Configures the MTU value for this interface.If it is not yet configured, retrieving the value of this object results in a zero value. Setting the value zero to this object effectively un-configures the MTU." ::= { agentIpv6InterfaceEntry 2 } agentIpv6InterfaceDadTransmits OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Configures the dad transmits value for this interface." ::= { agentIpv6InterfaceEntry 3 } agentIpv6InterfaceLinkLocalOnly OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When enabled, interface is capable of ipv6 operation without a global address. In this case, an eui-64 based link-local address is used. " DEFVAL { disable } ::= { agentIpv6InterfaceEntry 4 } agentIpv6InterfaceIcmpUnreachables OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If this object is enable, it indicates that ICMPv6 unreachables can be sent on this interface." ::= { agentIpv6InterfaceEntry 5 } agentIpv6InterfaceAutoconfig OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If this object is enabled, it indicates that the IPv6 address is automatically generated using IPv6 stateless address auto configuration." ::= { agentIpv6InterfaceEntry 6 } agentIpv6InterfaceDhcpClient OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If this object is enabled, the interface uses DHCPv6 Client protocol to acquire an IPv6 address." ::= { agentIpv6InterfaceEntry 7 } agentIpv6InterfaceIcmpRedirects OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable the sending of ICMPv6 redirect messages in the redirect scenario where the forwarded packet is sent out through the same interface on which the packet was received. " DEFVAL { enable } ::= { agentIpv6InterfaceEntry 8 } --************************************************************************************** -- agentIpv6RouterAdvertisementTable -- --************************************************************************************** agentIpv6RouterAdvertisementTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentIpv6RouterAdvertisementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "There is no global administrative flag for router advertisement. The global routing flag (agentIpv6RoutingMode) will be used for this purpose. If routing is disabled, router advertisement is disabled as well." ::= { agentIpv6Group 3 } agentIpv6RouterAdvertisementEntry OBJECT-TYPE SYNTAX AgentIpv6RouterAdvertisementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { agentIpv6RouterAdvertisementIfIndex } ::= { agentIpv6RouterAdvertisementTable 1 } AgentIpv6RouterAdvertisementEntry ::= SEQUENCE { agentIpv6RouterAdvertisementIfIndex Integer32, agentIpv6RouterAdvertisementSuppressMode INTEGER, agentIpv6RouterAdvertisementMaxAdvertisementInterval Integer32, agentIpv6RouterAdvertisementAdvertisementLifetime Integer32, agentIpv6RouterAdvertisementNbrSolicitInterval Integer32, agentIpv6RouterAdvertisementReachableTime Integer32, agentIpv6RouterAdvertisementManagedFlag INTEGER, agentIpv6RouterAdvertisementOtherFlag INTEGER, agentIpv6RouterAdvertisementHopLimitUnspecifiedMode INTEGER } agentIpv6RouterAdvertisementIfIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Interface Number to configure Router Advertisement on." ::= { agentIpv6RouterAdvertisementEntry 1 } agentIpv6RouterAdvertisementSuppressMode OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable router advertisement suppression on the interface." DEFVAL { disable } ::= { agentIpv6RouterAdvertisementEntry 2 } agentIpv6RouterAdvertisementMaxAdvertisementInterval OBJECT-TYPE SYNTAX Integer32 (4..1800) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum time allowed between sending router advertisements from the interface." DEFVAL { 600 } ::= { agentIpv6RouterAdvertisementEntry 3 } agentIpv6RouterAdvertisementAdvertisementLifetime OBJECT-TYPE SYNTAX Integer32 (4..65520) MAX-ACCESS read-write STATUS current DESCRIPTION "Value of lifetime field of router advertisement sent from the interface. This value must be greater than or equal to agentIpv6RouterAdvertisementMaxAdvertisementInterval." DEFVAL { 1800 } ::= { agentIpv6RouterAdvertisementEntry 4 } agentIpv6RouterAdvertisementNbrSolicitInterval OBJECT-TYPE SYNTAX Integer32 (0..3600000) MAX-ACCESS read-write STATUS current DESCRIPTION "Value of retrans time field of router advertisement sent from the interface. A value of 0 means this router does not specifiy the interval." DEFVAL { 0 } ::= { agentIpv6RouterAdvertisementEntry 5 } agentIpv6RouterAdvertisementReachableTime OBJECT-TYPE SYNTAX Integer32 (0..3600000) MAX-ACCESS read-write STATUS current DESCRIPTION "Value of reachable time field of router advertisement sent from the interface. A value of 0 means this router does not specifiy the interval." DEFVAL { 0 } ::= { agentIpv6RouterAdvertisementEntry 6 } agentIpv6RouterAdvertisementManagedFlag OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Value of managed config field of router advertisement sent from the interface." DEFVAL { disable } ::= { agentIpv6RouterAdvertisementEntry 7 } agentIpv6RouterAdvertisementOtherFlag OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Value of other config field of router advertisement sent from the interface." DEFVAL { disable } ::= { agentIpv6RouterAdvertisementEntry 8 } agentIpv6RouterAdvertisementHopLimitUnspecifiedMode OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures the router to send Router Advertisements on an interface with unspecified (0) Current Hop Limit value. This will tell the hosts on that link to ignore the Hop Limit from this Router." DEFVAL { disable } ::= { agentIpv6RouterAdvertisementEntry 9 } -- Address Prefix table -- The IPv6 Address Prefix table contains information on -- the entity's IPv6 Address Prefixes that are associated -- with IPv6 interfaces. agentIpv6AddrPrefixTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentIpv6AddrPrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The list of IPv6 address prefixes of IPv6 interfaces." ::= { agentIpv6Group 4 } agentIpv6AddrPrefixEntry OBJECT-TYPE SYNTAX AgentIpv6AddrPrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An interface entry containing objects of a particular IPv6 address prefix." INDEX { agentIpv6InterfaceIfIndex, agentIpv6AddrPrefix, agentIpv6AddrPrefixLength } ::= { agentIpv6AddrPrefixTable 1 } AgentIpv6AddrPrefixEntry ::= SEQUENCE { agentIpv6AddrPrefix Ipv6AddressPrefix, agentIpv6AddrPrefixLength INTEGER, agentIpv6AddrPrefixOnLinkFlag TruthValue, agentIpv6AddrPrefixAutonomousFlag TruthValue, agentIpv6AddrPrefixAdvPreferredLifetime Unsigned32, agentIpv6AddrPrefixAdvValidLifetime Unsigned32 } agentIpv6AddrPrefix OBJECT-TYPE SYNTAX Ipv6AddressPrefix MAX-ACCESS not-accessible STATUS current DESCRIPTION "The prefix associated with the this interface." ::= { agentIpv6AddrPrefixEntry 1 } agentIpv6AddrPrefixLength OBJECT-TYPE SYNTAX INTEGER (0..128) UNITS "bits" MAX-ACCESS not-accessible STATUS current DESCRIPTION "The length of the prefix (in bits)." ::= { agentIpv6AddrPrefixEntry 2 } agentIpv6AddrPrefixOnLinkFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object has the value 'true(1)', if this prefix can be used for on-link determination and the value 'false(2)' otherwise." ::= { agentIpv6AddrPrefixEntry 3 } agentIpv6AddrPrefixAutonomousFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Autonomous address configuration flag. When true(1), indicates that this prefix can be used for autonomous address configuration (i.e. can be used to form a local interface address). If false(2), it is not used to autoconfigure a local interface address." ::= { agentIpv6AddrPrefixEntry 4 } agentIpv6AddrPrefixAdvPreferredLifetime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "It is the length of time in seconds that this prefix will remain preferred, i.e. time until deprecation. A value of 4,294,967,295 represents infinity. The address generated from a deprecated prefix should no longer be used as a source address in new communications, but packets received on such an interface are processed as expected." ::= { agentIpv6AddrPrefixEntry 5 } agentIpv6AddrPrefixAdvValidLifetime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "It is the length of time in seconds that this prefix will remain valid, i.e. time until invalidation. A value of 4,294,967,295 represents infinity. The address generated from an invalidated prefix should not appear as the destination or source address of a packet." ::= { agentIpv6AddrPrefixEntry 6 } -- the IPv6 Address table -- The IPv6 address table contains this node's IPv6 -- addressing information. agentIpv6AddrTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentIpv6AddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of addressing information relevant to this node's interface addresses." ::= { agentIpv6Group 5 } agentIpv6AddrEntry OBJECT-TYPE SYNTAX AgentIpv6AddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The addressing information for one of this node's interface addresses." INDEX { agentIpv6InterfaceIfIndex, agentIpv6AddrAddress } ::= { agentIpv6AddrTable 1 } AgentIpv6AddrEntry ::= SEQUENCE { agentIpv6AddrAddress Ipv6Address, agentIpv6AddrPfxLength INTEGER, agentIpv6AddrEui64Flag TruthValue, agentIpv6AddrStatus RowStatus } agentIpv6AddrAddress OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPv6 address to which this entry's addressing information pertains." ::= { agentIpv6AddrEntry 1 } agentIpv6AddrPfxLength OBJECT-TYPE SYNTAX INTEGER(0..128) UNITS "bits" MAX-ACCESS read-create STATUS current DESCRIPTION "The length of the prefix (in bits) associated with the IPv6 address of this entry." ::= { agentIpv6AddrEntry 2 } agentIpv6AddrEui64Flag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object has the value 'true(1)', if this address uses and eui-64 generated interface identifier and the value 'false(2)' otherwise." ::= { agentIpv6AddrEntry 3 } agentIpv6AddrStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Creates a new entry in the Address table. Allowed values are: createAndGo(4) - Creates an entry in this table, associating the address with a given interface. The agentIpv6NetMask object must be set during creation. destroy(6) - Removes the associated address from the interface." ::= { agentIpv6AddrEntry 4 } -- IPv6 Static Routing table agentIpv6StaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentIpv6StaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IPv6 Static Routing table. This table contains an entry for each valid IPv6 static unicast route that can be used for packet forwarding determination." ::= { agentIpv6Group 6 } agentIpv6StaticRouteEntry OBJECT-TYPE SYNTAX AgentIpv6StaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A routing entry." INDEX { agentIpv6StaticRouteDest, agentIpv6StaticRoutePfxLength, agentIpv6StaticRouteIfIndex, agentIpv6StaticRouteNextHop } ::= { agentIpv6StaticRouteTable 1 } AgentIpv6StaticRouteEntry ::= SEQUENCE { agentIpv6StaticRouteDest Ipv6AddressPrefix, agentIpv6StaticRoutePfxLength INTEGER, agentIpv6StaticRouteIfIndex Ipv6IfIndexOrZero, agentIpv6StaticRouteNextHop Ipv6Address, agentIpv6StaticRoutePreference INTEGER, agentIpv6StaticRouteStatus RowStatus } agentIpv6StaticRouteDest OBJECT-TYPE SYNTAX Ipv6AddressPrefix MAX-ACCESS not-accessible STATUS current DESCRIPTION "The destination IPv6 address of this route. This object may not take a Multicast address value." ::= { agentIpv6StaticRouteEntry 1 } agentIpv6StaticRoutePfxLength OBJECT-TYPE SYNTAX INTEGER(0..128) UNITS "bits" MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the prefix length of the destination address." ::= { agentIpv6StaticRouteEntry 2 } agentIpv6StaticRouteIfIndex OBJECT-TYPE SYNTAX Ipv6IfIndexOrZero MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ipv6IfIndex. For routes with global address next hop this value can be zero." ::= { agentIpv6StaticRouteEntry 3 } agentIpv6StaticRouteNextHop OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address of the next system en route. " ::= { agentIpv6StaticRouteEntry 4 } agentIpv6StaticRoutePreference OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The routing preference metric for this route. A lower value is more preferred." DEFVAL { 1 } ::= { agentIpv6StaticRouteEntry 5 } agentIpv6StaticRouteStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Creates a new entry in the Address table. Allowed values are: createAndGo(4) - Creates an entry in this table. destroy(6) - Removes the associated route from the interface." ::= { agentIpv6StaticRouteEntry 6 } --************************************************************************************** -- agentIpv6ServicePortGroup -- --************************************************************************************** agentIpv6ServicePortGroup OBJECT IDENTIFIER ::= { agentIpv6Group 7 } -- IPv6 Service Port Prefix Table agentIpv6ServicePortPrefixTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentIpv6ServicePortPrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IPv6 Service Port Prefix Table. This table contains an entry for each valid IPv6 prefix configured on the Service Port." ::= { agentIpv6ServicePortGroup 1 } agentIpv6ServicePortPrefixEntry OBJECT-TYPE SYNTAX AgentIpv6ServicePortPrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An IPv6 Service Port Prefix entry." INDEX { agentIpv6ServicePortPrefixIndex } ::= { agentIpv6ServicePortPrefixTable 1 } AgentIpv6ServicePortPrefixEntry ::= SEQUENCE { agentIpv6ServicePortPrefixIndex Unsigned32, agentIpv6ServicePortPrefix Ipv6Address, agentIpv6ServicePortPrefixLength Unsigned32 } agentIpv6ServicePortPrefixIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the Ipv6 Prefix Address configured on the Service Port. Removal of a row will cause index values to be reassigned." ::= { agentIpv6ServicePortPrefixEntry 1 } agentIpv6ServicePortPrefix OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-only STATUS current DESCRIPTION "The Ipv6 Prefix Address configured on the Service Port." ::= { agentIpv6ServicePortPrefixEntry 2 } agentIpv6ServicePortPrefixLength OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The length of the IPv6 Prefix Address." ::= { agentIpv6ServicePortPrefixEntry 3 } -- IPv6 Service Port Default Router Table agentIpv6ServicePortDefaultRouterTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentIpv6ServicePortDefaultRouterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IPv6 Service Port Default Router Table. This table contains an entry for each valid IPv6 Default Router configured on the Service Port." ::= { agentIpv6ServicePortGroup 2 } agentIpv6ServicePortDefaultRouterEntry OBJECT-TYPE SYNTAX AgentIpv6ServicePortDefaultRouterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An IPv6 Service Port Default Router entry." INDEX { agentIpv6ServicePortDefaultRouterIndex } ::= { agentIpv6ServicePortDefaultRouterTable 1 } AgentIpv6ServicePortDefaultRouterEntry ::= SEQUENCE { agentIpv6ServicePortDefaultRouterIndex Unsigned32, agentIpv6ServicePortDefaultRouter Ipv6Address } agentIpv6ServicePortDefaultRouterIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the IPv6 Default Router Address configured on the Service Port. Removal of a row will cause index values to be reassigned." ::= { agentIpv6ServicePortDefaultRouterEntry 1 } agentIpv6ServicePortDefaultRouter OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-only STATUS current DESCRIPTION "The Address of the IPv6 Default Router configured on the Service Port." ::= { agentIpv6ServicePortDefaultRouterEntry 2 } -- IPv6 Service Port Neighbor Table agentIpv6ServicePortNbrTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentIpv6ServicePortNbrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IPv6 Service Port Neighbor Table. This table contains an entry for each valid IPv6 Neighbor configured on the Service Port." ::= { agentIpv6ServicePortGroup 3 } agentIpv6ServicePortNbrEntry OBJECT-TYPE SYNTAX AgentIpv6ServicePortNbrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An IPv6 Service Port Neighbor entry." INDEX { agentIpv6ServicePortNbrAddr } ::= { agentIpv6ServicePortNbrTable 1 } AgentIpv6ServicePortNbrEntry ::= SEQUENCE { agentIpv6ServicePortNbrAddr Ipv6Address, agentIpv6ServicePortNbrPhysAddr MacAddress, agentIpv6ServicePortNbrState INTEGER, agentIpv6ServicePortNbrUpdated TimeStamp, agentIpv6ServicePortNbrIsRouter TruthValue, agentIpv6ServicePortNbrType INTEGER } agentIpv6ServicePortNbrAddr OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Ipv6 Address of a neighbor switch visible to the Service Port." ::= { agentIpv6ServicePortNbrEntry 1 } agentIpv6ServicePortNbrPhysAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MacAddress of the neighboring switch." ::= { agentIpv6ServicePortNbrEntry 2 } agentIpv6ServicePortNbrState OBJECT-TYPE SYNTAX INTEGER { reachable(1), stale(2), delay(3), probe(4), unknown(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the neighboring switch: reachable(1) - The neighbor is reachable by this switch. stale(2) - Information about the neighbor is scheduled for deletion. delay(3) - No information has been received from neighbor during delay period. probe(4) - Switch is attempting to probe for this neighbor. unknown(6) - Unknown status." ::= { agentIpv6ServicePortNbrEntry 3 } agentIpv6ServicePortNbrUpdated OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The last sysUpTime that this neighbor has been updated." ::= { agentIpv6ServicePortNbrEntry 4 } agentIpv6ServicePortNbrIsRouter OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Returns true(1) if the neighbor machine is a router, false(2) otherwise." ::= { agentIpv6ServicePortNbrEntry 5 } agentIpv6ServicePortNbrType OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following dynamic(2), -- dynamically resolved static(3), -- statically configured local(4) -- local interface } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the mapping. The 'dynamic(2)' type indicates that the IPv6 address to physical addresses mapping has been dynamically resolved using the IPv6 Neighbor Discovery protocol. The static(3)' types indicates that the mapping has been statically configured. The local(4) indicates that the mapping is provided for an entity's own interface address." ::= { agentIpv6ServicePortNbrEntry 6 } -- IPv6 Service Port Static Neighbor Config Table agentIpv6ServicePortNbrCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentIpv6ServicePortNbrCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains an entry for each static IPv6 Neighbor on the Service Port." ::= { agentIpv6ServicePortGroup 4 } agentIpv6ServicePortNbrCfgEntry OBJECT-TYPE SYNTAX AgentIpv6ServicePortNbrCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the static IPv6 Neighbor on the Service Port." INDEX { agentIpv6ServicePortNbrCfgAddr } ::= { agentIpv6ServicePortNbrCfgTable 1 } AgentIpv6ServicePortNbrCfgEntry ::= SEQUENCE { agentIpv6ServicePortNbrCfgAddr Ipv6Address, agentIpv6ServicePortNbrCfgPhysAddr MacAddress, agentIpv6ServicePortNbrCfgEntryStatus RowStatus } agentIpv6ServicePortNbrCfgAddr OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Ipv6 Address of a static neighbor on the Service Port." ::= { agentIpv6ServicePortNbrCfgEntry 1 } agentIpv6ServicePortNbrCfgPhysAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The MAC Address of a static neighbor on the Service Port." ::= { agentIpv6ServicePortNbrCfgEntry 2 } agentIpv6ServicePortNbrCfgEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Create or delete the static neighbor entry on the Service Port. The configured static neighbor entry is always active." ::= { agentIpv6ServicePortNbrCfgEntry 3 } --************************************************************************************** -- agentIpv6IcmpGroup -- --************************************************************************************** agentIpv6IcmpControlGroup OBJECT IDENTIFIER ::= { agentIpv6Group 8 } agentIpv6IcmpRateLimitInterval OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the time interval between tokens being placed in the bucket for ICMP Ratelimit." ::= { agentIpv6IcmpControlGroup 1 } agentIpv6IcmpRateLimitBurstSize OBJECT-TYPE SYNTAX Integer32 (1..200) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the number of tokens to be placed after timeout." ::= { agentIpv6IcmpControlGroup 2 } --************************************************************************************** -- agentDhcp6ClientParametersTable -- --************************************************************************************** agentDhcp6ClientParametersTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentDhcp6ClientParametersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about the DHCPv6 Client parameters on the interfaces." ::= { agentIpv6Group 9 } agentDhcp6ClientParametersEntry OBJECT-TYPE SYNTAX AgentDhcp6ClientParametersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "DHCPv6 Client information on an interface." INDEX { agentDhcp6ClientInterfaceIndex } ::= { agentDhcp6ClientParametersTable 1 } AgentDhcp6ClientParametersEntry ::= SEQUENCE { agentDhcp6ClientInterfaceIndex Unsigned32, agentDhcp6ClientPrefix Ipv6AddressPrefix, agentDhcp6ClientPrefixlength INTEGER, agentDhcp6ClientState INTEGER, agentDhcp6ClientServerDUID DisplayString, agentDhcp6ClientT1Time Unsigned32, agentDhcp6ClientT2Time Unsigned32, agentDhcp6ClientIAID Unsigned32, agentDhcp6ClientPreferredLifeTime Unsigned32, agentDhcp6ClientValidLifeTime Unsigned32, agentDhcp6ClientRenewTime Unsigned32, agentDhcp6ClientExpireTime Unsigned32 } agentDhcp6ClientInterfaceIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Interface index on which the IPv6 address is leased by the DHCPv6 Server." ::= { agentDhcp6ClientParametersEntry 1 } agentDhcp6ClientPrefix OBJECT-TYPE SYNTAX Ipv6AddressPrefix MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 Prefix leased by the DHCPv6 Server." ::= { agentDhcp6ClientParametersEntry 2 } agentDhcp6ClientPrefixlength OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The Prefix length corresponding to the IPv6 Prefix leased by the DHCPv6 Server." ::= { agentDhcp6ClientParametersEntry 3 } agentDhcp6ClientState OBJECT-TYPE SYNTAX INTEGER{ inactive(0), solicit(1), request(2), active(3), renew(4), rebind(5), release(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The State of the DHCPv6 Client on this interface." ::= { agentDhcp6ClientParametersEntry 4 } agentDhcp6ClientServerDUID OBJECT-TYPE SYNTAX DisplayString (SIZE(1..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The DHCPv6 Unique Identifier of the DHCPv6 Server on this interface." ::= { agentDhcp6ClientParametersEntry 5 } agentDhcp6ClientT1Time OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The T1 (in seconds) time as indicated by the DHCPv6 Server. T1 value indicates the time interval after which the address is requested for renewal." ::= { agentDhcp6ClientParametersEntry 6 } agentDhcp6ClientT2Time OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The T2 (in seconds) time as indicated by the DHCPv6 Server. T2 value indicates the time interval after which the Client sends Rebind message to the Server incase there are no replies to the Renew messages." ::= { agentDhcp6ClientParametersEntry 7 } agentDhcp6ClientIAID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "An identifier for an identity association chosen by this Client." ::= { agentDhcp6ClientParametersEntry 8 } agentDhcp6ClientPreferredLifeTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time (in seconds) that the IPv6 address is leased by the DHCPv6 Server." ::= { agentDhcp6ClientParametersEntry 9 } agentDhcp6ClientValidLifeTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time (in seconds) that the IPv6 address is leased by the DHCPv6 Server." ::= { agentDhcp6ClientParametersEntry 10 } agentDhcp6ClientRenewTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time (in seconds) remaining to send a DHCPv6 Renew request to DHCPv6 Server for the leased address." ::= { agentDhcp6ClientParametersEntry 11 } agentDhcp6ClientExpireTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time (in seconds) when the DHCPv6 leased address expires." ::= { agentDhcp6ClientParametersEntry 12 } --**************************************************************** -- agentIpv6RoutingTableSummaryGroup -- --**************************************************************** agentIpv6RoutingTableSummaryGroup OBJECT IDENTIFIER ::= { agentIpv6Group 10 } agentIpv6ConnectedRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of connected routes in the IPv6 routing table." ::= { agentIpv6RoutingTableSummaryGroup 1 } agentIpv6StaticRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of static routes in the IPv6 routing table." ::= { agentIpv6RoutingTableSummaryGroup 2 } agentIpv66to4Routes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of 6to4 routes in the IPv6 routing table." ::= { agentIpv6RoutingTableSummaryGroup 3 } agentIpv6OspfRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of OSPFv2 routes in the IPv6 routing table." ::= { agentIpv6RoutingTableSummaryGroup 4 } agentIpv6OspfIntraRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of OSPFv2 intra-area routes in the IPv6 routing table." ::= { agentIpv6RoutingTableSummaryGroup 5 } agentIpv6OspfInterRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of OSPFv2 inter-area routes in the IPv6 routing table." ::= { agentIpv6RoutingTableSummaryGroup 6 } agentIpv6OspfExt1Routes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of OSPFv2 external type 1 routes in the IPv6 routing table." ::= { agentIpv6RoutingTableSummaryGroup 7 } agentIpv6OspfExt2Routes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of OSPFv2 external type 2 routes in the IPv6 routing table." ::= { agentIpv6RoutingTableSummaryGroup 8 } agentIpv6BgpRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of BGP routes in the IPv6 routing table." ::= { agentIpv6RoutingTableSummaryGroup 9 } agentIpv6EbgpRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of external BGP routes in the IPv6 routing table." ::= { agentIpv6RoutingTableSummaryGroup 10 } agentIpv6IbgpRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of internal BGP routes in the IPv6 routing table." ::= { agentIpv6RoutingTableSummaryGroup 11 } agentIpv6LocalBgpRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of local BGP routes in the IPv6 routing table." ::= { agentIpv6RoutingTableSummaryGroup 12 } agentIpv6RejectRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of reject routes in the IPv6 routing table." ::= { agentIpv6RoutingTableSummaryGroup 13 } agentIpv6TotalRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of routes in the IPv6 routing table." ::= { agentIpv6RoutingTableSummaryGroup 14 } agentIpv6BestRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IPv6 routes in the forwarding table." ::= { agentIpv6RoutingTableSummaryGroup 15 } agentIpv6BestRoutesHigh OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The highest number of IPv6 routes in the forwarding table." ::= { agentIpv6RoutingTableSummaryGroup 16 } agentIpv6AlternateRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of alternate routes in the IPv6 routing table. An alternate route is less preferred than the best route and is not used for forwarding." ::= { agentIpv6RoutingTableSummaryGroup 17 } agentIpv6RouteAdds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of routes added to the IPv6 routing table." ::= { agentIpv6RoutingTableSummaryGroup 18 } agentIpv6RouteModifies OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of routes changed in the IPv6 routing table." ::= { agentIpv6RoutingTableSummaryGroup 19 } agentIpv6RouteDeletes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of routes removed from the IPv6 routing table." ::= { agentIpv6RoutingTableSummaryGroup 20 } agentIpv6UnresolvedRouteAdds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IPv6 route adds that failed because none of the route's next hops were on a local subnet." ::= { agentIpv6RoutingTableSummaryGroup 21 } agentIpv6InvalidRouteAdds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IPv6 routes adds that failed because the route was invalid." ::= { agentIpv6RoutingTableSummaryGroup 22 } agentIpv6FailedRouteAdds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IPv6 routes adds that failed because of a resource limitation in the routing table" ::= { agentIpv6RoutingTableSummaryGroup 23 } agentIpv6ReservedLocals OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IPv6 routing table entries reserved for a local subnet on a routing interface that is down. " ::= { agentIpv6RoutingTableSummaryGroup 24 } agentIpv6UniqueNextHops OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of distinct next hops used among all IPv6 routes currently in the routing table. These include local interfaces for local routes and neighbors for indirect routes." ::= { agentIpv6RoutingTableSummaryGroup 25 } agentIpv6UniqueNextHopsHigh OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The highest count of unique next hops since counters were last cleared." ::= { agentIpv6RoutingTableSummaryGroup 26 } agentIpv6NextHopGroups OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of next hop groups in use by one or more routes. Each next hop group includes one or more next hops." ::= { agentIpv6RoutingTableSummaryGroup 27 } agentIpv6NextHopGroupsHigh OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The highest count of next hop groups since counters were last cleared." ::= { agentIpv6RoutingTableSummaryGroup 28 } agentIpv6EcmpGroups OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of next hop groups with multiple next hops." ::= { agentIpv6RoutingTableSummaryGroup 29 } agentIpv6EcmpGroupsHigh OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The high water mark of the number of ECMP groups." ::= { agentIpv6RoutingTableSummaryGroup 30 } agentIpv6EcmpRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of IPv6 routes with multiple next hops." ::= { agentIpv6RoutingTableSummaryGroup 31 } agentIpv6TruncEcmpRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ECMP routes that are currently installed in the forwarding table with just one next hop. The forwarding table may limit the number of ECMP routes or the number of ECMP groups. When an ECMP route cannot be installed because such a limit is reached, the route is installed with a single next hop." ::= { agentIpv6RoutingTableSummaryGroup 32 } agentIpv6EcmpRetries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ECMP routes that have been installed in the forwarding table after initially being installed with a single next hop." ::= { agentIpv6RoutingTableSummaryGroup 33 } --**************************************************************** -- agentIpv6EcmpCountTable -- --************************************************************ agentIpv6EcmpCountTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentIpv6EcmpCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A count of the number of routes with each number of ECMP next hops. A walk of this table only returns the entries with a non-zero value for agentIpv6EcmpRouteCount." ::= { agentIpv6Group 11 } agentIpv6EcmpCountEntry OBJECT-TYPE SYNTAX AgentIpv6EcmpCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of IPv6 routes with a given number of next hops." INDEX { agentIpv6EcmpNextHopCount } ::= { agentIpv6EcmpCountTable 1 } AgentIpv6EcmpCountEntry ::= SEQUENCE { agentIpv6EcmpNextHopCount Unsigned32, agentIpv6EcmpRouteCount Gauge32 } agentIpv6EcmpNextHopCount OBJECT-TYPE SYNTAX Unsigned32 (0..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The number of next hops in a route. From 0 to the maximum number of next hops in an ECMP route. The maximum varies by platform." ::= { agentIpv6EcmpCountEntry 1 } agentIpv6EcmpRouteCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IPv6 routes with agentIpv6EcmpNextHopCount next hops." ::= { agentIpv6EcmpCountEntry 2 } --**************************************************************** -- agentIpv6NetworkPortGroup -- --**************************************************************** agentIpv6NetworkPortGroup OBJECT IDENTIFIER ::= { agentIpv6Group 12 } -- IPv6 Network Port Neighbor Table agentIpv6NetworkPortNbrTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentIpv6NetworkPortNbrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IPv6 Network Port Neighbor Table. This table contains an entry for each valid IPv6 Neighbor configured on the Network Port." ::= { agentIpv6NetworkPortGroup 1 } agentIpv6NetworkPortNbrEntry OBJECT-TYPE SYNTAX AgentIpv6NetworkPortNbrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An IPv6 Network Port Neighbor entry." INDEX { agentIpv6NetworkPortNbrAddr } ::= { agentIpv6NetworkPortNbrTable 1 } AgentIpv6NetworkPortNbrEntry ::= SEQUENCE { agentIpv6NetworkPortNbrAddr Ipv6Address, agentIpv6NetworkPortNbrPhysAddr MacAddress, agentIpv6NetworkPortNbrState INTEGER, agentIpv6NetworkPortNbrUpdated TimeStamp, agentIpv6NetworkPortNbrIsRouter TruthValue, agentIpv6NetworkPortNbrType INTEGER } agentIpv6NetworkPortNbrAddr OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Ipv6 Address of a neighbor switch visible to the Network Port." ::= { agentIpv6NetworkPortNbrEntry 1 } agentIpv6NetworkPortNbrPhysAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MacAddress of the neighboring switch." ::= { agentIpv6NetworkPortNbrEntry 2 } agentIpv6NetworkPortNbrState OBJECT-TYPE SYNTAX INTEGER { reachable(1), stale(2), delay(3), probe(4), unknown(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the neighboring switch: reachable(1) - The neighbor is reachable by this switch. stale(2) - Information about the neighbor is scheduled for deletion. delay(3) - No information has been received from neighbor during delay period. probe(4) - Switch is attempting to probe for this neighbor. unknown(6) - Unknown status." ::= { agentIpv6NetworkPortNbrEntry 3 } agentIpv6NetworkPortNbrUpdated OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The last sysUpTime that this neighbor has been updated." ::= { agentIpv6NetworkPortNbrEntry 4 } agentIpv6NetworkPortNbrIsRouter OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Returns true(1) if the neighbor machine is a router, false(2) otherwise." ::= { agentIpv6NetworkPortNbrEntry 5 } agentIpv6NetworkPortNbrType OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following dynamic(2), -- dynamically resolved static(3), -- statically configured local(4) -- local interface } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the mapping. The 'dynamic(2)' type indicates that the IPv6 address to physical addresses mapping has been dynamically resolved using the IPv6 Neighbor Discovery protocol. The static(3)' types indicates that the mapping has been statically configured. The local(4) indicates that the mapping is provided for an entity's own interface address." ::= { agentIpv6NetworkPortNbrEntry 6 } -- IPv6 Network Port Static Neighbor Config Table agentIpv6NetworkPortNbrCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentIpv6NetworkPortNbrCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains an entry for each static IPv6 Neighbor on the Network Port." ::= { agentIpv6NetworkPortGroup 2 } agentIpv6NetworkPortNbrCfgEntry OBJECT-TYPE SYNTAX AgentIpv6NetworkPortNbrCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the static IPv6 Neighbor on the Network Port." INDEX { agentIpv6NetworkPortNbrCfgAddr } ::= { agentIpv6NetworkPortNbrCfgTable 1 } AgentIpv6NetworkPortNbrCfgEntry ::= SEQUENCE { agentIpv6NetworkPortNbrCfgAddr Ipv6Address, agentIpv6NetworkPortNbrCfgPhysAddr MacAddress, agentIpv6NetworkPortNbrCfgEntryStatus RowStatus } agentIpv6NetworkPortNbrCfgAddr OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Ipv6 Address of a static neighbor on the Network Port." ::= { agentIpv6NetworkPortNbrCfgEntry 1 } agentIpv6NetworkPortNbrCfgPhysAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The MAC Address of a static neighbor on the Network Port." ::= { agentIpv6NetworkPortNbrCfgEntry 2 } agentIpv6NetworkPortNbrCfgEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Create or delete the static neighbor entry on the Network Port. The configured static neighbor entry is always active." ::= { agentIpv6NetworkPortNbrCfgEntry 3 } -- IPv6 Static Neighbor Config table agentIpv6NbrCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentIpv6NbrCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains an entry for each static IPv6 Neighbor on the Network Port." ::= { agentIpv6Group 13 } agentIpv6NbrCfgEntry OBJECT-TYPE SYNTAX AgentIpv6NbrCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the static IPv6 Neighbor on the Network Port." INDEX { agentIpv6IfIndex, agentIpv6NbrCfgAddr } ::= { agentIpv6NbrCfgTable 1 } AgentIpv6NbrCfgEntry ::= SEQUENCE { agentIpv6IfIndex Ipv6IfIndex, agentIpv6NbrCfgAddr Ipv6Address, agentIpv6NbrCfgPhysAddr MacAddress, agentIpv6NbrCfgEntryStatus RowStatus } agentIpv6IfIndex OBJECT-TYPE SYNTAX Ipv6IfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique non-zero value identifying the particular IPv6 interface." ::= { agentIpv6NbrCfgEntry 1 } agentIpv6NbrCfgAddr OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Ipv6 Address of a static neighbor on the Routing or Host interface." ::= { agentIpv6NbrCfgEntry 2 } agentIpv6NbrCfgPhysAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The MAC Address of a static neighbor on the Routing or Host interface." ::= { agentIpv6NbrCfgEntry 3 } agentIpv6NbrCfgEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Create or delete the static neighbor entry on the Routing or Host interface. The configured static neighbor entry is always active." ::= { agentIpv6NbrCfgEntry 4 } --*********************************************************************************** -- IPv6 NUD related parameters -- --*********************************************************************************** agentIpv6NeighborsDynamicRenew OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables/disables the periodic NUD (neighbor unreachability detection) to be run on the existing IPv6 neighbor entries based on the activity of the entries in the hardware. If the setting is disabled, only those entries that are actively used in the hardware are triggered for NUD. If the setting is enabled, all the entries are triggered for NUD irrespective of their usage in the hardware." DEFVAL { disable } ::= { agentIpv6Group 14 } agentIpv6UnresolvedDataRateLimit OBJECT-TYPE SYNTAX Integer32 (50..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "The rate in packets-per-second for the number of IPv6 data packets trapped to CPU when the packet fails to be forwarded in the hardware due to unresolved hardware address of the destined IPv6 node." DEFVAL { 1024 } ::= { agentIpv6Group 15 } agentIpv6NUDMaxUnicastSolicits OBJECT-TYPE SYNTAX Integer32 (3..10) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of unicast Neighbor Solicitations sent during neighbor resolution or during NUD (neighbor unreachabililty detection) before switching to multicast Neighbor Solicitations." DEFVAL { 3 } ::= { agentIpv6Group 16 } agentIpv6NUDMaxMulticastSolicits OBJECT-TYPE SYNTAX Integer32 (3..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of multicast Neighbor Solicitations sent during neighbor resolution or during NUD (neighbor unreachabililty detection)." DEFVAL { 3 } ::= { agentIpv6Group 17 } agentIpv6NUDBackoffMultiple OBJECT-TYPE SYNTAX Integer32 (1..5) MAX-ACCESS read-write STATUS current DESCRIPTION "The exponential backoff multiple to be used in the calculation of the next timeout value for Neighbor Solicitation transmission during NUD (neighbor unreachabililty detection) following the exponential backoff algorithm. The next timeout value is limited to a maximum value of 60 seconds if the value with exponential backoff calculation is greater than 60 seconds." DEFVAL { 1 } ::= { agentIpv6Group 18 } END