RADLAN-TIMESYNCHRONIZATION-MIB DEFINITIONS ::= BEGIN IMPORTS rnd FROM RADLAN-MIB TruthValue FROM RADLAN-SNMPv2 DisplayString FROM SNMPv2-TC-v1 Unsigned32, Integer32, IpAddress FROM SNMPv2-SMI MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI TEXTUAL-CONVENTION, RowStatus FROM SNMPv2-TC; rlTimeSynchronization MODULE-IDENTITY LAST-UPDATED "200408030024Z" ORGANIZATION "Radlan Computer Communication Ltd." CONTACT-INFO "radlan.com" DESCRIPTION "The MIB module describes the private MIB for SNTP & TIME definitions." REVISION "200311230024Z" DESCRIPTION "Initial revision" ::= { rnd 92 } rlTimeSyncMethodMode OBJECT IDENTIFIER ::= { rlTimeSynchronization 1 } rlSntpNtpClient OBJECT IDENTIFIER ::= { rlTimeSynchronization 2 } rlSntpNtpConfig OBJECT IDENTIFIER ::= { rlSntpNtpClient 1 } rlSntpConfig OBJECT IDENTIFIER ::= { rlSntpNtpClient 2 } rlNtpConfig OBJECT IDENTIFIER ::= { rlSntpNtpClient 3 } -- -- Textual Conventions -- NTPTimeStamp ::= TEXTUAL-CONVENTION DISPLAY-HINT "4d.4d" STATUS current DESCRIPTION "NTP timestamps are represented as a 64-bit unsigned fixed-point number, in seconds relative to 00:00 on 1 January 1900. The integer part is in the first 32 bits and the fraction part is in the last 32 bits." REFERENCE "D.L. Mills, 'Network Time Protocol (Version 3)', RFC-1305, March 1992, Section 3.1" SYNTAX OCTET STRING (SIZE (8)) NTPSignedTimeValue ::= TEXTUAL-CONVENTION DISPLAY-HINT "2d.2d" STATUS current DESCRIPTION "The time in seconds that could represent signed quantities like time delay with respect to some source. This textual-convention is specific to RADLAN implementation of NTP where 32-bit integers are used for such quantities. The signed integer part is in the first 16 bits and the fraction part is in the last 16 bits." SYNTAX OCTET STRING (SIZE (4)) NTPStratum ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates the stratum of the clock. The stratum defines the accuracy of a time server. Higher the stratum, lower the accuracy. 0, unspecified 1, primary reference (e.g., calibrated atomic clock, radio clock) 2-255, secondary reference (via NTP)" REFERENCE "D.L. Mills, 'Network Time Protocol (Version 3)', RFC-1305, March 1992, Section 2.2" SYNTAX Integer32 (0..255) -- ---------------------------------------------------------------------- -- Global TimeSyncMethod -- ---------------------------------------------------------------------- rlTimeSyncMibVersion OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "TimeSync Mib Version." ::= { rlTimeSyncMethodMode 1 } rndTimeSyncManagedTime OBJECT-TYPE SYNTAX DisplayString (SIZE(6)) MAX-ACCESS read-write STATUS current DESCRIPTION "The time will be sent in the format hhmmss" ::= { rlTimeSyncMethodMode 2 } rndTimeSyncManagedDate OBJECT-TYPE SYNTAX DisplayString (SIZE(6)) MAX-ACCESS read-write STATUS current DESCRIPTION "The date will be sent in the format ddmmyy" ::= { rlTimeSyncMethodMode 3 } rndTimeSyncManagedDateTime OBJECT-TYPE SYNTAX DisplayString (SIZE(12)) MAX-ACCESS read-write STATUS current DESCRIPTION "The date and time will be sent in the format ddmmyyhhmmss" ::= { rlTimeSyncMethodMode 4 } rlTimeSyncMethod OBJECT-TYPE SYNTAX INTEGER { none(1), sntp(2), ntp(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Method to be used for time synchronization in the device." DEFVAL { none } ::= { rlTimeSyncMethodMode 5 } rlTimeZone OBJECT-TYPE SYNTAX DisplayString (SIZE(1..6)) MAX-ACCESS read-write STATUS current DESCRIPTION "Offset from Greenwich time (format [+/-]hh:mm)." ::= {rlTimeSyncMethodMode 6 } rlTimeZoneCode OBJECT-TYPE SYNTAX DisplayString (SIZE(0..4)) MAX-ACCESS read-write STATUS current DESCRIPTION "Code definition for current TimeZone." ::= {rlTimeSyncMethodMode 7 } rlDaylightSavingTimeMode OBJECT-TYPE SYNTAX INTEGER { recurring(1), date(2), none(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Daylight Saving Time - Recurring/Date/None." DEFVAL { none } ::= { rlTimeSyncMethodMode 8 } rlDaylightSavingTimeStart OBJECT-TYPE SYNTAX OCTET STRING (SIZE(14)) MAX-ACCESS read-write STATUS current DESCRIPTION "Daylight Saving Time start date. In recurring mode: week wday month hh:mm In date mode: month day year hh:mm week: 0-6 (0=First, 6=Last) wday: 1-7 (Sunday-Saturday) month: 1-12 (January-December) day: 1-31 year: 0-99 (2000-2099) hh: 0-23 (hours) mm: 0-59 (minutes)" ::= { rlTimeSyncMethodMode 9 } rlDaylightSavingTimeEnd OBJECT-TYPE SYNTAX OCTET STRING (SIZE(14)) MAX-ACCESS read-write STATUS current DESCRIPTION "Daylight Saving Time end date. In recurring mode: week wday month hh:mm In date mode: month day year hh:mm week: 0-6 (0=First, 6=Last) wday: 1-7 (Sunday-Saturday) month: 1-12 (January-December) day: 1-31 year: 0-99 (2000-2099) hh: 0-23 (hours) mm: 0-59 (minutes)" ::= { rlTimeSyncMethodMode 10 } rlDaylightSavingTimeOffset OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Daylight Saving Time - The number of minutes to add to the clock during summer time." DEFVAL { 60 } ::= { rlTimeSyncMethodMode 11 } rlDaylightSavingTimeCode OBJECT-TYPE SYNTAX DisplayString (SIZE(0..4)) MAX-ACCESS read-write STATUS current DESCRIPTION "Code definition for current Daylight Saving Time." ::= {rlTimeSyncMethodMode 12 } rlTZDSTOffset OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Local Time Zone and Daylight Saving Time offset in seconds." ::= { rlTimeSyncMethodMode 13 } -- ---------------------------------------------------------------------- -- SNTP/NTP client configuration parameters -- ---------------------------------------------------------------------- rlSntpNtpMibVersion OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "SntpNtp Mib Version." ::= { rlSntpNtpConfig 1 } rlSntpNtpConfigMode OBJECT-TYPE SYNTAX INTEGER { none(1), unicast(2), anycast(3), multicast(4), unicastAnycast(5), unicastMulticast(6), anycastMulticast(7), unicastAnycastMulticast(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current configuration operational mode of SNTP/NTP client." DEFVAL { none } ::= { rlSntpNtpConfig 2 } rlSntpNtpConfigSysStratum OBJECT-TYPE SYNTAX NTPStratum MAX-ACCESS read-only STATUS current DESCRIPTION "The stratum of the local clock. If the value is set to 1, i.e., this is a primary reference, then the Primary-Clock procedure described in Section 3.4.6, in RFC-1305 is invoked." ::= { rlSntpNtpConfig 3 } rlSntpNtpConfigPollInterval OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Period of time (in seconds) between succesive attempts to perform an update via SNTP." DEFVAL { 1024 } ::= { rlSntpNtpConfig 4 } rlSntpNtpConfigPrimaryPollSrvAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Ip Address of a trusted SNTP server for polling." ::= { rlSntpNtpConfig 5 } rlSntpNtpConfigPrimaryPollSrvMrid OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The mrid of the primary server." ::= { rlSntpNtpConfig 6 } rlSntpNtpConfigPrimaryPollSrvIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The interface addressed of the primary server." ::= { rlSntpNtpConfig 7 } rlSntpNtpConfigPrimaryPollSrvStratum OBJECT-TYPE SYNTAX NTPStratum MAX-ACCESS read-only STATUS current DESCRIPTION "The stratum of the primary polling server." ::= { rlSntpNtpConfig 8 } rlSntpNtpConfigSyncSrvAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Ip Address of the synced server." ::= { rlSntpNtpConfig 9 } rlSntpNtpConfigSyncSrvMrid OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The mrid of the synced server." ::= { rlSntpNtpConfig 10 } rlSntpNtpConfigSyncSrvIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The interface addressed of the synced server." ::= { rlSntpNtpConfig 11 } rlSntpNtpConfigSyncSrvType OBJECT-TYPE SYNTAX INTEGER { none(1), unicast(2), anycast(3), broadcast(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Synced server type." DEFVAL { none } ::= { rlSntpNtpConfig 12 } rlSntpNtpConfigSyncSrvStratum OBJECT-TYPE SYNTAX NTPStratum MAX-ACCESS read-only STATUS current DESCRIPTION "The stratum of the synced server." ::= { rlSntpNtpConfig 13 } rlSntpNtpConfigRetryTimeout OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "SNTP/NTP requests Retry Interval." ::= { rlSntpNtpConfig 14 } rlSntpNtpConfigRetryCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "SNTP/NTP requests Retry Count." ::= { rlSntpNtpConfig 15 } -- ---------------------------------------------------------------------- -- SNTP client configuration parameters -- ---------------------------------------------------------------------- rlSntpClientMode OBJECT-TYPE SYNTAX INTEGER { none(1), active(2), passive(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current operational mode of SNTP client." DEFVAL { none } ::= { rlSntpConfig 1 } rlSntpUnicastAdminState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "SNTP Unicast Administrative state - Enable/Disable SNTP. In case of reinitializing polling or time synchronization this MIB is modified. The MIB can be enabled even thought it is already enabled." DEFVAL { disabled } ::= { rlSntpConfig 2 } rlSntpBroadcastAdminState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "SNTP Broadcast Administrative state - Enable/Disable SNTP. In case of reinitializing polling or time synchronization this MIB is modified. The MIB can be enabled even thought it is already enabled." DEFVAL { disabled } ::= { rlSntpConfig 3 } rlSntpAnycastAdminState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "SNTP Anycast Administrative state - Enable/Disable SNTP. In case of reinitializing polling or time synchronization this MIB is modified. The MIB can be enabled even thought it is already enabled." DEFVAL { disabled } ::= { rlSntpConfig 4 } rlSntpUnicastPollState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "SNTP Unicast poll state - TRUE for polled." DEFVAL { false } ::= { rlSntpConfig 5 } rlSntpBroadcastPollState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "SNTP Broadcast poll state - TRUE for polled." DEFVAL { false } ::= { rlSntpConfig 6 } rlSntpAnycastPollState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "SNTP Anycast poll state - TRUE for polled." DEFVAL { false } ::= { rlSntpConfig 7 } rlSntpAuthenticationState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "SNTP authentication state- Enable/Disable SNTP." DEFVAL { disabled } ::= { rlSntpConfig 8 } rlTimeValidFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Is time valid." DEFVAL { false } ::= { rlSntpConfig 9 } -- ---------------------------------------------------------------------- -- Table for configuring Interfaces (Broadcast) -- ---------------------------------------------------------------------- rlSntpConfigBroadcastTable OBJECT-TYPE SYNTAX SEQUENCE OF RlSntpBroadcastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing broadcast mode information per interface." ::= { rlSntpConfig 10 } rlSntpBroadcastEntry OBJECT-TYPE SYNTAX RlSntpBroadcastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Private paramters for interface: sntp status, broadcast mode." INDEX { rlSntpBroadcastIfIndex } ::= { rlSntpConfigBroadcastTable 1 } RlSntpBroadcastEntry ::= SEQUENCE { rlSntpBroadcastIfIndex INTEGER, rlSntpBroadcastIfAdminState INTEGER, rlSntpBroadcastMode INTEGER, rlSntpBroadcastPolled TruthValue, rlSntpBroadcastAddress IpAddress, rlSntpBroadcastStratum NTPStratum, rlSntpBroadcastLastResp NTPTimeStamp, rlSntpBroadcastStatus INTEGER, rlSntpBroadcastOffset NTPTimeStamp, rlSntpBroadcastDelay NTPSignedTimeValue, rlSntpBroadcastRowStatus RowStatus } rlSntpBroadcastIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface addressed by this entry." ::= {rlSntpBroadcastEntry 1} rlSntpBroadcastIfAdminState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "SNTP interface Adminstrative state- Enable/Disable SNTP. In case of reinitializing polling or time synchronization this MIB is modified. The MIB can be enabled even thought it is already enabled." DEFVAL { disabled } ::= { rlSntpBroadcastEntry 2 } rlSntpBroadcastMode OBJECT-TYPE SYNTAX INTEGER { none(1), receive(2), send(3), receiveSend(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "SNTP/NTP Broadcast Mode. none - no broadcast SNTP packets are received or sent. Receive - host only receive SNTP packets that were sent to broadcast address (were not directed to the host). This is multicast mode in the RFC. Send - host only send SNTP packets and wait for replies directed to the host. This is anycast mode in the RFC. ReceiveSend - host receive broadcast messages (destination is broadcast address in the received messages) and send SNTP packets to wait for replies directed to the host (destination address of the reply is the host address). This mode combines anycast and multicast modes in the RFC." DEFVAL { receiveSend } ::= { rlSntpBroadcastEntry 3 } rlSntpBroadcastPolled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "TRUE if participating in polling cycle, else FALSE." DEFVAL { false } ::= { rlSntpBroadcastEntry 4 } rlSntpBroadcastAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Ip Address of a trusted SNTP server." ::= { rlSntpBroadcastEntry 5 } rlSntpBroadcastStratum OBJECT-TYPE SYNTAX NTPStratum MAX-ACCESS read-only STATUS current DESCRIPTION "The stratum of this server." ::= { rlSntpBroadcastEntry 6 } rlSntpBroadcastLastResp OBJECT-TYPE SYNTAX NTPTimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "SNTP Broadcast Last Response Time" ::= { rlSntpBroadcastEntry 7 } rlSntpBroadcastStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), inProcess(2), up(3), down(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Operational State of the remote IP Address of the SNTP Broadcast. unknown - requests were not sent yet. inProcess - replies were not received yet. up - server sent SNTP packets. down - server stopped sending SNTP packets." DEFVAL { unknown } ::= { rlSntpBroadcastEntry 8 } rlSntpBroadcastOffset OBJECT-TYPE SYNTAX NTPTimeStamp UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The estimated offset of the server's clock relative to the local clock, in seconds. The host determines the value of this object using the algorithm described in RFC 2030." ::= { rlSntpBroadcastEntry 9 } rlSntpBroadcastDelay OBJECT-TYPE SYNTAX NTPSignedTimeValue UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The estimated round-trip delay of the server's clock relative to the local clock over the network path between them, in seconds. The host determines the value of this object using the algorithm described in RFC 2030." ::= { rlSntpBroadcastEntry 10 } rlSntpBroadcastRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The Status of this SNTP broadcast interface information." ::= { rlSntpBroadcastEntry 11 } rlSntpConfigAnycastTable OBJECT-TYPE SYNTAX SEQUENCE OF RlSntpAnycastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing anycast information per interface." ::= { rlSntpConfig 11 } rlSntpAnycastEntry OBJECT-TYPE SYNTAX RlSntpAnycastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Private paramters for interface: server info." INDEX { rlSntpAnycastIfIndex } ::= { rlSntpConfigAnycastTable 1 } RlSntpAnycastEntry ::= SEQUENCE { rlSntpAnycastIfIndex INTEGER, rlSntpAnycastAddress IpAddress, rlSntpAnycastStratum NTPStratum, rlSntpAnycastLastResp NTPTimeStamp, rlSntpAnycastStatus INTEGER, rlSntpAnycastOffset NTPTimeStamp, rlSntpAnycastDelay NTPSignedTimeValue, rlSntpAnycastRowStatus RowStatus } rlSntpAnycastIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface addressed by this entry." ::= {rlSntpAnycastEntry 1} rlSntpAnycastAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Ip Address of a trusted SNTP server." ::= { rlSntpAnycastEntry 2 } rlSntpAnycastStratum OBJECT-TYPE SYNTAX NTPStratum MAX-ACCESS read-only STATUS current DESCRIPTION "The stratum of this server." ::= { rlSntpAnycastEntry 3 } rlSntpAnycastLastResp OBJECT-TYPE SYNTAX NTPTimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "SNTP Anycast Last Response Time" ::= { rlSntpAnycastEntry 4 } rlSntpAnycastStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), inProcess(2), up(3), down(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Operational State of the remote IP Address of the SNTP Anycast. unknown - requests were not sent yet. inProcess - replies were not received yet. up - server sent SNTP packets. down - server stopped sending SNTP packets." DEFVAL { unknown } ::= { rlSntpAnycastEntry 5 } rlSntpAnycastOffset OBJECT-TYPE SYNTAX NTPTimeStamp UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The estimated offset of the server's clock relative to the local clock, in seconds. The host determines the value of this object using the algorithm described in RFC 2030." ::= { rlSntpAnycastEntry 6 } rlSntpAnycastDelay OBJECT-TYPE SYNTAX NTPSignedTimeValue UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The estimated round-trip delay of the server's clock relative to the local clock over the network path between them, in seconds. The host determines the value of this object using the algorithm described in RFC 2030." ::= { rlSntpAnycastEntry 7 } rlSntpAnycastRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The Status of this SNTP anycast interface information." ::= { rlSntpAnycastEntry 8 } -- ---------------------------------------------------------------------- -- Table for configuring Servers (Unicast) -- ---------------------------------------------------------------------- rlSntpConfigServerTable OBJECT-TYPE SYNTAX SEQUENCE OF RlSntpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing trusted SNTP servers to be queried in unicast or broadcast mode." ::= { rlSntpConfig 12 } rlSntpServerEntry OBJECT-TYPE SYNTAX RlSntpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A trusted server." INDEX { rlSntpServerAddress } ::= { rlSntpConfigServerTable 1 } RlSntpServerEntry ::= SEQUENCE { rlSntpServerAddress IpAddress, rlSntpServerPolled TruthValue, rlSntpServerStratum NTPStratum, rlSntpServerLastResp NTPTimeStamp, rlSntpServerStatus INTEGER, rlSntpServersOffset NTPTimeStamp, rlSntpServersDelay NTPSignedTimeValue, rlSntpServersKeyIdentifier Unsigned32, rlSntpServerRowStatus RowStatus } rlSntpServerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ip Address of a trusted SNTP server." ::= { rlSntpServerEntry 1 } rlSntpServerPolled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "TRUE if participating in polling cycle, else FALSE." DEFVAL { false } ::= { rlSntpServerEntry 2 } rlSntpServerStratum OBJECT-TYPE SYNTAX NTPStratum MAX-ACCESS read-only STATUS current DESCRIPTION "The stratum of this server." ::= { rlSntpServerEntry 3 } rlSntpServerLastResp OBJECT-TYPE SYNTAX NTPTimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "SNTP Server Last Response Time" ::= { rlSntpServerEntry 4 } rlSntpServerStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), inProcess(2), up(3), down(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Operational State of the remote IP Address of the SNTP Server. unknown - requests were not sent yet. inProcess - replies were not received yet. up - server sent SNTP packets. down - server stopped sending SNTP packets." DEFVAL { unknown } ::= { rlSntpServerEntry 5 } rlSntpServersOffset OBJECT-TYPE SYNTAX NTPTimeStamp UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The estimated offset of the server's clock relative to the local clock, in seconds. The host determines the value of this object using the algorithm described in RFC 2030." ::= { rlSntpServerEntry 6 } rlSntpServersDelay OBJECT-TYPE SYNTAX NTPSignedTimeValue UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The estimated round-trip delay of the server's clock relative to the local clock over the network path between them, in seconds. The host determines the value of this object using the algorithm described in RFC 2030." ::= { rlSntpServerEntry 7 } rlSntpServersKeyIdentifier OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Authentication key identifier. The valid range is 1-4294967295. Value zero, means no authentication is being done." ::= { rlSntpServerEntry 8 } rlSntpServerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The Status of this SNTP server information." ::= { rlSntpServerEntry 9 } -- ---------------------------------------------------------------------- -- Table for configuring authentication keys -- ---------------------------------------------------------------------- rlSntpConfigAuthenticationTable OBJECT-TYPE SYNTAX SEQUENCE OF RlSntpAuthenticationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table authentication keys." ::= { rlSntpConfig 13 } rlSntpAuthenticationEntry OBJECT-TYPE SYNTAX RlSntpAuthenticationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Keys information for authenticationof NTP packets." INDEX { rlSntpAuthenticationKeyID } ::= { rlSntpConfigAuthenticationTable 1 } RlSntpAuthenticationEntry ::= SEQUENCE { rlSntpAuthenticationKeyID Unsigned32 (1..4294967295), rlSntpAuthenticationKeyValue DisplayString, rlSntpAuthenticationKeyState INTEGER, rlSntpAuthenticationRowStatus RowStatus } rlSntpAuthenticationKeyID OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "The key identifier. Valid rabge for key identifier is 1-4294967295." ::= {rlSntpAuthenticationEntry 1} rlSntpAuthenticationKeyValue OBJECT-TYPE SYNTAX DisplayString (SIZE(1..8)) MAX-ACCESS read-write STATUS current DESCRIPTION "Key value." ::= { rlSntpAuthenticationEntry 2 } rlSntpAuthenticationKeyState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Authentication key state - Enable/Disable key." DEFVAL { disabled } ::= { rlSntpAuthenticationEntry 3 } rlSntpAuthenticationRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The Status of this Authentication key information." ::= { rlSntpAuthenticationEntry 4 } END