-- MibName=raisecomSynce
-- *****************************************************************
-- Version 1.0 Created 2010.12.30 by hongding
-- This version of MIB is created just for the Management of fan .
--
-- Copyright(c) 2002-2012 by RAISECOM TECH, Ltd. 
-- All rights reserved.
--
-- modify history 
-- 01,20120418,yangzhonghong, ITS00020700,change the enum values of the raisecomFanCardState node  
-- 01,20121206,guokai, ESW00006977,add raisecomFanMonitorTrapSendEnable
-- *****************************************************************
RAISECOM-FANMONITOR-MIB  DEFINITIONS ::= BEGIN

IMPORTS
        raisecomSystem
            FROM RAISECOM-SYSTEM-MIB     
          TruthValue
              FROM SNMPv2-TC
        Integer32,Unsigned32,Counter32                         
        	FROM SNMPv2-SMI;

	raisecomFanMonitor MODULE-IDENTITY
        LAST-UPDATED    "201012270000Z"
        ORGANIZATION    "Raisecom, Inc."
        CONTACT-INFO
                "       Raise Systems

                Postal: Beijing,
                        China

                   Tel: 86-010-82884499

                E-mail: support@raisecom.com"
        DESCRIPTION
                "Configuration of fanMonitor object." 
-- -------------------------------------------------------------
-- modify history
-- -------------------------------------------------------------       
        REVISION    "201012300000Z"
        DESCRIPTION "The initial revision of this MIB."
                ::= { raisecomSystem 5}         

-- -------------------------------------------------------------
-- groups in the raisecomFanMonitor MIB
-- -------------------------------------------------------------
raisecomFanMonitorNotification  OBJECT IDENTIFIER ::= { raisecomFanMonitor 1 }  
raisecomFanMonitorMibObjects    OBJECT IDENTIFIER ::= { raisecomFanMonitor 2 }  

-- -------------------------------------------------------------
-- raisecomFanMonitorNotification
-- -------------------------------------------------------------    
    raisecomFanSpeedNormal NOTIFICATION-TYPE
        OBJECTS { raisecomFanIndex,
                  raisecomFanSpeedValue
                }
        STATUS current
        DESCRIPTION
                "The trap notification occur when fan state translating from abnormal to normal."            
        ::= { raisecomFanMonitorNotification 1 }  
        
	raisecomFanSpeedAbnormal NOTIFICATION-TYPE
        OBJECTS { raisecomFanIndex,
                  raisecomFanSpeedValue,
                  raisecomFanSpeedDueValue
                }
        STATUS current
        DESCRIPTION
                "The trap notification occur when fan state translatingfrom normal to abnormal."
        ::= { raisecomFanMonitorNotification 2 }    
        
    raisecomFanCardUp NOTIFICATION-TYPE
        OBJECTS { raisecomFanCardState }
        STATUS current
        DESCRIPTION
                "The trap notification occur when fan card state translating from down to up."
        ::= { raisecomFanMonitorNotification 3 }    
        
    raisecomFanCardDown NOTIFICATION-TYPE
        OBJECTS { raisecomFanCardState }
        STATUS current
        DESCRIPTION
                "The trap notification occur when fan card state translating from up to down."
        ::= { raisecomFanMonitorNotification 4 } 
-- -------------------------------------------------------------
-- raisecomFanMonitorMibObjects
-- -------------------------------------------------------------  
raisecomFanMonitorGlobalGroup   OBJECT IDENTIFIER ::= { raisecomFanMonitorMibObjects 1 }   

-- -------------------------------------------------------------
-- raisecomFanMonitorGlobalGroup
-- -------------------------------------------------------------          
    raisecomFanMonitorMode OBJECT-TYPE
        SYNTAX	INTEGER
        {
        	enforce(1),
    		auto(2)     	
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
           	"An integer value that specify the current monitor mode.
           	ENFORCE(1) means that the fan speed need to set manully;
           	AUTO(2) means that the fan speed will ajusted autoly according 
           	to the temperature"
        ::= { raisecomFanMonitorGlobalGroup 1 } 
        
	raisecomFanMonitorSpdLevel OBJECT-TYPE
        SYNTAX	Unsigned32(1..4)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
           	"Specify the speed level of fan in enforce mode."  
        ::= { raisecomFanMonitorGlobalGroup 2 }
        
	raisecomFanMonitorNumber OBJECT-TYPE
        SYNTAX	Unsigned32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
           	"Specify the number of fan being monitorred."  
        ::= { raisecomFanMonitorGlobalGroup 3 } 
        
	raisecomFanMonitorLevlNumber OBJECT-TYPE
        SYNTAX	Unsigned32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
           	"Specify the total number of fan speed levels."  
        ::= { raisecomFanMonitorGlobalGroup 4 }

      
    raisecomFanCardState OBJECT-TYPE  
        SYNTAX	INTEGER
        {
        	all-down(1),
        	all-up(2),
    		card1-up(3),
    		card2-up(4)    		     	
        }
        MAX-ACCESS  read-only        
        STATUS      current
        DESCRIPTION
           	"Specify the current state of fan cards.
			 all_down(1) means that all fan cards are down;
			 all_up(2) means that all fan cards are up;
			 card1_up(3) means that fan card 1 is up, the others are down;
			 card2_up(4) means that fan card 2 is up, the others are down." 
        ::= { raisecomFanMonitorGlobalGroup 5 }
        
    raisecomFanCardSerialNumber OBJECT-TYPE  
        SYNTAX  OCTET STRING
        MAX-ACCESS  read-only        
        STATUS      current
        DESCRIPTION
           	"specify the identical serial number of current fan card,this 
           	string number will be set when device leaving factory" 
        ::= { raisecomFanMonitorGlobalGroup 6 }   
        
   raisecomFanMonitorTrapSendEnable  OBJECT-TYPE 
	SYNTAX   INTEGER  
	 { 
	     disable(0), 
	     enable (1)
	 }
	MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "Specifies the status of sending trap"  
   ::= {raisecomFanMonitorGlobalGroup  7 }        
                        
-- -------------------------------------------------------------
-- raisecomFanMonitorStateTable
-- -------------------------------------------------------------
    raisecomFanMonitorStateTable OBJECT-TYPE
        SYNTAX SEQUENCE OF RaisecomFanMonitorStateEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Fan monitor state table."
        ::= { raisecomFanMonitorMibObjects 2 }

    raisecomFanMonitorStateEntry OBJECT-TYPE
        SYNTAX RaisecomFanMonitorStateEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Fan monitor state entry."
        INDEX { raisecomFanIndex }
        ::= { raisecomFanMonitorStateTable 1 }

    RaisecomFanMonitorStateEntry ::= SEQUENCE {
        raisecomFanIndex               Unsigned32,
        raisecomFanSpeedValue          Unsigned32,
        raisecomFanWorkState            INTEGER,
        raisecomFanSpeedCurrentLevel   Unsigned32  
    }
    
    raisecomFanIndex OBJECT-TYPE
        SYNTAX  Unsigned32  
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Specify the sequence number of fan."
        ::= { raisecomFanMonitorStateEntry 1 } 
        
    raisecomFanSpeedValue OBJECT-TYPE
        SYNTAX  Unsigned32
	    MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Specify the actural speed of the current fan."
        ::= { raisecomFanMonitorStateEntry 2 }
    
    raisecomFanWorkState OBJECT-TYPE
        SYNTAX  INTEGER
		{
			normal(1),
			abnormal(2)
		}
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Specify the current state of fan
            normal(1) means the current fan operate normally;
            abnormal(2) means the current fan operate abnormally"
        ::= { raisecomFanMonitorStateEntry 3 }    
        
     raisecomFanSpeedCurrentLevel OBJECT-TYPE
        SYNTAX  Unsigned32(1..4)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Specify the temperature scale border that match the speed levle,
            based on this scale border,the current fan speed will ajusted autoly
            according to the current temperature" 
        ::= { raisecomFanMonitorStateEntry 4 }           
-- -------------------------------------------------------------
-- raisecomFanSpeedLevelTable
-- -------------------------------------------------------------
    raisecomFanSpeedLevelTable OBJECT-TYPE
        SYNTAX SEQUENCE OF RaisecomFanSpeedLevelEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "fan speed level information table."
        ::= { raisecomFanMonitorMibObjects 3 }

    raisecomFanSpeedLevelEntry OBJECT-TYPE
        SYNTAX RaisecomFanSpeedLevelEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "fan speed level information entry."
        INDEX { raisecomFanSpeedLevelIndex }
        ::= { raisecomFanSpeedLevelTable 1 }

    RaisecomFanSpeedLevelEntry ::= SEQUENCE { 
        raisecomFanSpeedLevelIndex              Unsigned32,
        raisecomFanSpeedDueValue               Unsigned32,
        raisecomFanSpeedTemperatureScale       Unsigned32
    }
        
    raisecomFanSpeedLevelIndex OBJECT-TYPE
        SYNTAX  Unsigned32
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Specify the fan speed level index."  
        ::= { raisecomFanSpeedLevelEntry 1 }    
    
    raisecomFanSpeedDueValue OBJECT-TYPE
        SYNTAX  Unsigned32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Specify the speed value that match the fan levle index.
            this value can ben get from a new or normal fan ,not an used
            fan ,because the used fan may be aged" 
        ::= { raisecomFanSpeedLevelEntry 2 }   
 
     raisecomFanSpeedTemperatureScale OBJECT-TYPE
        SYNTAX  Unsigned32(45..75)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Specify the temperature scale border that match the speed levle,
            based on this scale border,the current fan speed will ajusted autoly
            according to the current temperature" 
        ::= { raisecomFanSpeedLevelEntry 3 }    
                 
END