--MibName=rosMgmtAlarm -- ***************************************************************** -- ROSMGMT-ALARM-MGMT-MIB.mib: ROSMGMT ALARM MIB -- -- April 2011, yangguodong -- -- Copyright (c) 1996-2011 by Raisecom Technology Co., Ltd. -- All rights reserved. -- -- ***************************************************************** -- ROSMGMT-ALARM-MGMT-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY,OBJECT-TYPE, Unsigned32,Integer32 FROM SNMPv2-SMI -- [RFC2578] TEXTUAL-CONVENTION,TruthValue FROM SNMPv2-TC -- [RFC2579] SnmpAdminString FROM SNMP-FRAMEWORK-MIB -- [RFC3411] ifIndex FROM IF-MIB rosMgmt FROM RAISECOM-BASE-MIB; rosMgmtAlarmMgmt MODULE-IDENTITY LAST-UPDATED "202006180000Z" -- 18 June 2020 00:00:00 GMT ORGANIZATION "Raisecom Technology Co., Ltd." CONTACT-INFO "Raisecom Science & Technology Co., ltd. E-mail: support@rosMgmt.com ." DESCRIPTION "This MIB module contains managed object definitions for MPLS. " REVISION "202006180000Z" -- 18 June 2020 00:00:00 GMT DESCRIPTION "Add alarm reversal mode to automatically flip state." REVISION "201103120000Z" -- 12 March 2011 00:00:00 GMT DESCRIPTION "ROSMGMT ALARM MIB initial version." ::= { rosMgmt 34 } --rosMgmtAlarmMgmt 0 notification rosMgmtAlarmMgmtObejcts OBJECT IDENTIFIER ::= { rosMgmtAlarmMgmt 1 } --rosMgmtAlarmMgmt 2 conformance group -- User-defined types AlarmStorageMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes how to store alarm active table when the alarm table was full.When the storage mode is stop,the new raised alarm will be discarded.It will not insert to alarm active table. If the storage mode is loop,the oldest row in alarm active table will be deleted and the the newly raiseco alarm will be inserted to the alarm active table." SYNTAX INTEGER { stop(1), -- eh? loop(2) -- e.g., in RAM } AlarmInverseMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the mode of alarm inverse " SYNTAX INTEGER { none(1), -- inverse mode is non auto(2), -- inverse mode is auto manual(3), -- inverse mode is manual autofinish(4) -- inverse mode is auto finish } --end user defined type --start of alarm config rosMgmtAlarmMgmtScalarGroup OBJECT IDENTIFIER ::= { rosMgmtAlarmMgmtObejcts 1 } rosMgmtAlarmMgmtRaiseDelay OBJECT-TYPE SYNTAX Integer32 (0..600) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The approximate period from the time a alarm was raised to a time this alarm was reported." DEFVAL { 0 } ::= { rosMgmtAlarmMgmtScalarGroup 1} rosMgmtAlarmMgmtClearDelay OBJECT-TYPE SYNTAX Integer32 (0..600) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The approximate period from the time a alarm was cleared to a time this alarm report." DEFVAL { 0 } ::= { rosMgmtAlarmMgmtScalarGroup 2 } rosMgmtAlarmMgmtActiveStoreMode OBJECT-TYPE SYNTAX AlarmStorageMode MAX-ACCESS read-write STATUS current DESCRIPTION "The storage mode of the alarm active table" ::= { rosMgmtAlarmMgmtScalarGroup 3 } rosMgmtAlarmMgmtInhibitEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or Disable Alarm Inhibit" DEFVAL { true } ::= { rosMgmtAlarmMgmtScalarGroup 4 } rosMgmtAlarmMgmtSyslogEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or Disable write syslog when an alarm raise" DEFVAL { true } ::= { rosMgmtAlarmMgmtScalarGroup 5 } rosMgmtAlarmMgmtActiveClear OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "clear active alarm according to the active table third index" ::= { rosMgmtAlarmMgmtScalarGroup 6 } rosMgmtAlarmMgmtConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF RosMgmtAlarmMgmtConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies the information of alarm configuration." ::= { rosMgmtAlarmMgmtObejcts 2 } rosMgmtAlarmMgmtConfigEntry OBJECT-TYPE SYNTAX RosMgmtAlarmMgmtConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in this table represents the configuration of specified alarm." INDEX { rosMgmtAlarmMgmtId,ifIndex } ::= { rosMgmtAlarmMgmtConfigTable 1 } RosMgmtAlarmMgmtConfigEntry ::= SEQUENCE { rosMgmtAlarmMgmtId Unsigned32, rosMgmtAlarmMgmtClear TruthValue, rosMgmtAlarmMgmtReportEnable TruthValue, rosMgmtAlarmMgmtMonitorEnable TruthValue, rosMgmtAlarmMgmtInverseMode AlarmInverseMode, rosMgmtAlarmMgmtModuleName SnmpAdminString, rosMgmtAlarmMgmtGroupName SnmpAdminString } rosMgmtAlarmMgmtId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "First index of alarm config table which is equal to alarm group Id" ::= { rosMgmtAlarmMgmtConfigEntry 1 } rosMgmtAlarmMgmtClear OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The swith of alarm clear,when open the swith the related active alarm entry will be deleted from alarm active table" DEFVAL { false } ::= { rosMgmtAlarmMgmtConfigEntry 2 } rosMgmtAlarmMgmtReportEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable Alarm Report" DEFVAL { true } ::= { rosMgmtAlarmMgmtConfigEntry 3 } rosMgmtAlarmMgmtMonitorEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable alarm monitor" DEFVAL { true } ::= { rosMgmtAlarmMgmtConfigEntry 4 } rosMgmtAlarmMgmtInverseMode OBJECT-TYPE SYNTAX AlarmInverseMode MAX-ACCESS read-write STATUS current DESCRIPTION "The mode of alarm inverse" DEFVAL { none } ::= { rosMgmtAlarmMgmtConfigEntry 5 } rosMgmtAlarmMgmtModuleName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The module name which this alarm belongs to." ::= { rosMgmtAlarmMgmtConfigEntry 6 } rosMgmtAlarmMgmtGroupName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of alarm group." ::= { rosMgmtAlarmMgmtConfigEntry 7 } rosMgmtAlarmMgmtCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF RosMgmtAlarmMgmtCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies the information of alarm configuration." ::= { rosMgmtAlarmMgmtObejcts 3 } rosMgmtAlarmMgmtCfgEntry OBJECT-TYPE SYNTAX RosMgmtAlarmMgmtCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in this table represents the configuration of specified alarm." INDEX { rosMgmtAlarmMgmtCfgAlarmType,rosMgmtAlarmMgmtCfgAlarmResType,rosMgmtAlarmMgmtCfgAlarmRes} ::= { rosMgmtAlarmMgmtCfgTable 1 } RosMgmtAlarmMgmtCfgEntry ::= SEQUENCE { rosMgmtAlarmMgmtCfgAlarmType Unsigned32, rosMgmtAlarmMgmtCfgAlarmResType INTEGER, rosMgmtAlarmMgmtCfgAlarmRes Unsigned32, rosMgmtAlarmMgmtCfgClear TruthValue, rosMgmtAlarmMgmtCfgMonitorEnable TruthValue, rosMgmtAlarmMgmtCfgReportEnable TruthValue, rosMgmtAlarmMgmtCfgInverseMode AlarmInverseMode } rosMgmtAlarmMgmtCfgAlarmType OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Third index of alarm Mgmt config table.The type of Alarm." ::= { rosMgmtAlarmMgmtCfgEntry 1 } rosMgmtAlarmMgmtCfgAlarmResType OBJECT-TYPE SYNTAX INTEGER { slotindex(1), --告警源:板卡 pwindex(2), --告警源：PW lspindex(3), --告警源：LSP loifindex(4), --告警源：LOOPBACK口 agifindex(5), --告警源：AG口 apifindex(6), --告警源：AP口 obifindex(7), --告警源：OUTBAND口 tdmifindex(8), --告警源：TDM口 tunnelifindex(9), --告警源：TRUNK口 vlanifindex(10), --告警源：VLAN口 subifindex(11), --告警源：SUBIF口 portindex(12), --告警源：端口 apagsubifindex(13), --告警源：AP,AG,子接口 powerindex(14), --告警源：电源 fanindex(15), --告警源：风扇 boardindex(16), --告警源：板卡，电源，风扇 cfmindex(17), erpsindex(18), apsindex(19), bfdindex(20), ldpindex(21), lsaindex(22), ifindex(23), cpuindex(24), tdmsubifindex(25), tdmtdmsubifindex(26), stmifindex(27), stmsubifindex(28), stmsubtdmtdmsubindex(29), stmvcindex(30), eponifindex(31), eonuifindex(32), eonusubifindex(33), apeponifindex(34), apagvlansubifindex(35) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "First index of alarm Mgmt config table.The type of Alarm Resoure." ::= { rosMgmtAlarmMgmtCfgEntry 2 } rosMgmtAlarmMgmtCfgAlarmRes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Second index of alarm Mgmt config table.The value of Alarm Resoure." ::= { rosMgmtAlarmMgmtCfgEntry 3 } rosMgmtAlarmMgmtCfgClear OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The swith of alarm clear,when open the swith, the related active alarm entry will be deleted from alarm active table." DEFVAL { false } ::= { rosMgmtAlarmMgmtCfgEntry 4 } rosMgmtAlarmMgmtCfgMonitorEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable alarm Monitor." DEFVAL { true } ::= { rosMgmtAlarmMgmtCfgEntry 5 } rosMgmtAlarmMgmtCfgReportEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable alarm Report." DEFVAL { true } ::= { rosMgmtAlarmMgmtCfgEntry 6 } rosMgmtAlarmMgmtCfgInverseMode OBJECT-TYPE SYNTAX AlarmInverseMode MAX-ACCESS read-write STATUS current DESCRIPTION "Alarm Inverse Mode." DEFVAL { none } ::= { rosMgmtAlarmMgmtCfgEntry 7 } --end of alarm config rosMgmtAlarmMgmtMonitorLevel OBJECT-TYPE SYNTAX INTEGER { clear(1), indeterminate(2), critical(3), major(4), minor(5), warning(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The level of Alarm Monitor." DEFVAL { minor } ::= { rosMgmtAlarmMgmtScalarGroup 7} rosMgmtAlarmMgmtClearLevel OBJECT-TYPE SYNTAX INTEGER { clear(1), indeterminate(2), critical(3), major(4), minor(5), warning(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The level of Alarm Monitor." ::= { rosMgmtAlarmMgmtScalarGroup 8} rosMgmtAlarmMgmtMonitor OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or Disable Alarm Monitor." DEFVAL { true } ::= { rosMgmtAlarmMgmtScalarGroup 9 } rosMgmtAlarmMgmtCorrelationInhibit OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or Disable Alarm CorrelationInhibit." DEFVAL { true } ::= { rosMgmtAlarmMgmtScalarGroup 10 } rosMgmtAlarmMgmtReport OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or Disable Alarm Report." DEFVAL { true } ::= { rosMgmtAlarmMgmtScalarGroup 11 } -- rosMgmtAlarmMgmtCfgOutPutTable OBJECT-TYPE -- SYNTAX SEQUENCE OF RaisecomAlarmMgmtCfgOutPutEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "This table specifies the information of alarm configuration." -- ::= { rosMgmtAlarmMgmtObejcts 14 } -- -- rosMgmtAlarmMgmtCfgOutPutEntry OBJECT-TYPE -- SYNTAX RaisecomAlarmMgmtCfgOutPutEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "A row in this table represents the configuration of specified alarm." -- INDEX { rosMgmtAlarmMgmtAlarmOutputGroupIndex, rosMgmtAlarmMgmtAlarmOutputType} -- ::= { rosMgmtAlarmMgmtCfgOutPutTable 1 } -- -- RaisecomAlarmMgmtCfgOutPutEntry ::= SEQUENCE { -- rosMgmtAlarmMgmtAlarmOutputGroupIndex INTEGER, -- rosMgmtAlarmMgmtAlarmOutputType Unsigned32, -- rosMgmtAlarmMgmtAlarmOutputRowStatus TruthValue -- } -- -- rosMgmtAlarmMgmtAlarmOutputGroupIndex OBJECT-TYPE -- SYNTAX INTEGER (1..2) -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "The index of alarm Mgmt OutputGroup table." -- ::= { rosMgmtAlarmMgmtCfgOutPutEntry 1} -- -- rosMgmtAlarmMgmtAlarmOutputType OBJECT-TYPE -- SYNTAX Unsigned32 -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "Third index of alarm Mgmt config table.The type of Alarm." -- ::= { rosMgmtAlarmMgmtCfgOutPutEntry 2 } -- -- rosMgmtAlarmMgmtAlarmOutputRowStatus OBJECT-TYPE -- SYNTAX TruthValue -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Enable or disable Alarm Output" -- DEFVAL { true } -- ::= { rosMgmtAlarmMgmtCfgOutPutEntry 3} -- -- -- rosMgmtAlarmMgmtCfgOutPutGroupTable OBJECT-TYPE -- SYNTAX SEQUENCE OF RaisecomAlarmMgmtCfgOutPutGroupEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "This table specifies the information of alarm configuration." -- ::= { rosMgmtAlarmMgmtObejcts 15 } -- -- rosMgmtAlarmMgmtCfgOutPutGroupEntry OBJECT-TYPE -- SYNTAX RaisecomAlarmMgmtCfgOutPutGroupEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "A row in this table represents the configuration of specified alarm." -- INDEX { rosMgmtAlarmMgmtAlarmOutputgrpIndex} -- ::= { rosMgmtAlarmMgmtCfgOutPutGroupTable 1 } -- -- RaisecomAlarmMgmtCfgOutPutGroupEntry ::= SEQUENCE { -- rosMgmtAlarmMgmtAlarmOutputgrpIndex INTEGER, -- rosMgmtAlarmMgmtAlarmOutputEnable EnableVar -- } -- -- rosMgmtAlarmMgmtAlarmOutputgrpIndex OBJECT-TYPE -- SYNTAX INTEGER (1..2) -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "The index of alarm Mgmt OutputGroup table." -- ::= { rosMgmtAlarmMgmtCfgOutPutGroupEntry 1} -- -- rosMgmtAlarmMgmtAlarmOutputEnable OBJECT-TYPE -- SYNTAX EnableVar -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Third index of alarm Mgmt config table.The type of Alarm." -- ::= { rosMgmtAlarmMgmtCfgOutPutGroupEntry 2 } END