--MibName=ROSMGMT-OPTICAL-TRANSCEIVER-MIB.mib
-- *****************************************************************
-- ROSMGMT-OPTICAL-TRANSCEIVER-MIB.mib
--
-- Copyright(c) 2003-2005 by RAISECOM TECH, Ltd. 
-- All rights reserved.
-- *****************************************************************       

-- *****************************************************************
-- Modi Report£ºFormat: <number>, <time>, <author>, <desc> 
-- 01, 20110623, yangzhognhong, change the value of the node raisecomOpticalTransceiverMediaType 
--                              for SFP+ development
--
-- *****************************************************************


ROSMGMT-OPTICAL-TRANSCEIVER-MIB DEFINITIONS ::= BEGIN

IMPORTS
    Integer32, Unsigned32,
    MODULE-IDENTITY,
    NOTIFICATION-TYPE,
    OBJECT-TYPE,TimeTicks               FROM SNMPv2-SMI
	rosMgmt                             FROM RAISECOM-BASE-MIB
    TEXTUAL-CONVENTION,
    TruthValue                          FROM SNMPv2-TC
--    OBJECT-GROUP                        FROM SNMPv2-CONF
    ifIndex                             FROM IF-MIB;   
--    raisecomNotificationLocation        FROM RAISECOM-COMMON-MANAGEMENT-MIB
--    ClearVar                            FROM SWITCH-TC;

rosMgmtOpticalTransceiver MODULE-IDENTITY
    LAST-UPDATED   "202004160000Z"
    ORGANIZATION   "Raisecom, Inc."
    CONTACT-INFO  
                "       Raise Systems
                        
                Postal: Beijing,
                        China

                   Tel: 86-010-82884499

                E-mail: chenyu@raisecom.com"
    DESCRIPTION
        "This MIB module defines objects to monitor optical
        characteristics on the optical interfaces in a network element. "
        REVISION   "202004160000Z"
        DESCRIPTION
            "The initial revision of this MIB."
        ::={ rosMgmt 18 }
           
rosMgmtOpticalTransceiverNotifications   OBJECT IDENTIFIER ::= { rosMgmtOpticalTransceiver 0 }
rosMgmtOpticalTransceiverObjects         OBJECT IDENTIFIER ::= { rosMgmtOpticalTransceiver 1 }
rosMgmtOpticalTransceiverConformance     OBJECT IDENTIFIER ::= { rosMgmtOpticalTransceiver 2 }


rosMgmtOpticalTransceiverAbsentTrap NOTIFICATION-TYPE
    OBJECTS     { rosMgmtOpticalTransceiverHwInfoAbsStatus,
                  rosMgmtOpticalTransceiverSpecificationCheckStatus }
    STATUS      current
    DESCRIPTION
        "This notification is sent when the optical module is removed from the device.

        This notification may be suppressed under the following
        conditions:
        - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
        "
    ::={ rosMgmtOpticalTransceiverNotifications 1 }

rosMgmtOpticalTransceiverPresentTrap  NOTIFICATION-TYPE
    OBJECTS     { rosMgmtOpticalTransceiverHwInfoAbsStatus,
                  rosMgmtOpticalTransceiverSpecificationCheckStatus }
    STATUS      current
    DESCRIPTION
        "This notification is sent when the optical module is plugged into the device.

        This notification may be suppressed under the following
        conditions:
        - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
        "
    ::={ rosMgmtOpticalTransceiverNotifications 2 }

rosMgmtOpticalTransceiverNRAlarmTrap  NOTIFICATION-TYPE
    OBJECTS     { rosMgmtOpticalTransceiverHwInfoNRStatus }
    STATUS      current
    DESCRIPTION
        "This notification is sent when the transmitted or received data of optical module is invalid.

        This notification may be suppressed under the following
        conditions:
        - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
        "
    ::={ rosMgmtOpticalTransceiverNotifications 3 }

rosMgmtOpticalTransceiverNRNormalTrap  NOTIFICATION-TYPE
    OBJECTS     { rosMgmtOpticalTransceiverHwInfoNRStatus  }
    STATUS      current
    DESCRIPTION
        "This notification is sent when the transmitted or received data of optical module is valid.

        This notification may be suppressed under the following
        conditions:
        - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
        "
    ::={ rosMgmtOpticalTransceiverNotifications 4 }

rosMgmtOpticalTransceiverRxLosAlarmTrap  NOTIFICATION-TYPE
    OBJECTS     { rosMgmtOpticalTransceiverHwInfoRxLosStatus }
    STATUS      current
    DESCRIPTION
        "This notification is sent when the optical module receiving signal is lost.

        This notification may be suppressed under the following
        conditions:
        - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
        "
    ::={ rosMgmtOpticalTransceiverNotifications 5 }

rosMgmtOpticalTransceiverRxLosNormaTrap   NOTIFICATION-TYPE
    OBJECTS     {rosMgmtOpticalTransceiverHwInfoRxLosStatus  }
    STATUS      current
    DESCRIPTION
        "This notification is sent when the optical module receiving signal is back to normal.

        This notification may be suppressed under the following
        conditions:
        - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
        "
    ::={ rosMgmtOpticalTransceiverNotifications 6 }

--raisecomOpticalTransceiverCheckPwdFailureTrap  NOTIFICATION-TYPE
--    STATUS      current
--    DESCRIPTION
--        "This notification is sent when the optical module password checking is failed.

--        This notification may be suppressed under the following
--        conditions:
--        - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
--        "
--    ::={ rosMgmtOpticalTransceiverNotifications 7 }

--raisecomOpticalTransceiverCheckPwdSucceedTrap  NOTIFICATION-TYPE
--    STATUS      current
--    DESCRIPTION
--        "This notification is sent when the optical module password cheching is successful.

--        This notification may be suppressed under the following
--        conditions:
--        - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
--        "
--    ::={ rosMgmtOpticalTransceiverNotifications 8 }

rosMgmtOpticalTransceiverParamAlarmTrap    NOTIFICATION-TYPE
    OBJECTS     {  rosMgmtOpticalTransceiverParameterValue,
                   rosMgmtOpticalTransceiverParamAlarmStatus  }
    STATUS      current
    DESCRIPTION
        "This notification is sent when the optical module parameter value increase to above 
         the high alarm threshold or dicrease to under the low alarm threshold.


        This notification may be suppressed under the following
        conditions:
        - depending on the value of the rosMgmtOpticalNotifyEnable and rosMgmtOpticalPortNotifyEnable objects.
        "
    ::={ rosMgmtOpticalTransceiverNotifications 7 }

rosMgmtOpticalTransceiverParamAlarmNormalTrap   NOTIFICATION-TYPE
    OBJECTS     {  rosMgmtOpticalTransceiverParameterValue,
                   rosMgmtOpticalTransceiverParamAlarmStatus  }
    STATUS      current
    DESCRIPTION
        "This notification is sent when the optical module parameter value dicrease to
 	     under the high alarm threshold or increase to above the low alarm threshold.

        This notification may be suppressed under the following
        conditions:
        - depending on the value of the rosMgmtOpticalNotifyEnable and rosMgmtOpticalPortNotifyEnable objects.
        "
    ::={ rosMgmtOpticalTransceiverNotifications 8 }

rosMgmtOpticalTransceiverParamWarningTrap   NOTIFICATION-TYPE
    OBJECTS     {  rosMgmtOpticalTransceiverParameterValue,
                   rosMgmtOpticalTransceiverParamAlarmStatus  }
    STATUS      current
    DESCRIPTION
        "This notification is sent when the optical module parameter value increase to above 
     	the high warning threshold or dicrease to under the low warning threshold.

        This notification may be suppressed under the following
        conditions:
        - depending on the value of the rosMgmtOpticalNotifyEnable and rosMgmtOpticalPortNotifyEnable objects.
        "
    ::={ rosMgmtOpticalTransceiverNotifications 9 }

rosMgmtOpticalTransceiverParamWarningNormalTrap   NOTIFICATION-TYPE
    OBJECTS     {  rosMgmtOpticalTransceiverParameterValue,
                   rosMgmtOpticalTransceiverParamAlarmStatus  }
    STATUS      current
    DESCRIPTION
        "This notification is sent when the optical module parameter value dicrease to
    	under the high warning threshold or increase to above the low warning threshold.   
    	
        This notification may be suppressed under the following
        conditions:
        - depending on the value of the rosMgmtOpticalNotifyEnable and rosMgmtOpticalPortNotifyEnable objects.
        "
    ::={ rosMgmtOpticalTransceiverNotifications 10 }

rosMgmtOpticalTransceiverLaserBackLightAlarmTrap   NOTIFICATION-TYPE
    OBJECTS     {  rosMgmtOpticalTransceiverParameterValue,
                   rosMgmtOpticalTransceiverParamAlarmStatus  }
    STATUS      current
    DESCRIPTION
        "This notification is sent when the optical module password cheching is successful.

        This notification may be suppressed under the following
        conditions:
        - depending on the value of the rosMgmtOpticalNotifyEnable and rosMgmtOpticalPortNotifyEnable objects.
        "
    ::={ rosMgmtOpticalTransceiverNotifications 11 }

rosMgmtOpticalTransceiverLaserBackLightAlarmNormalTrap   NOTIFICATION-TYPE
    OBJECTS     {  rosMgmtOpticalTransceiverParameterValue,
                   rosMgmtOpticalTransceiverParamAlarmStatus  }

    STATUS      current
    DESCRIPTION
        "This notification is sent when the optical module password cheching is successful.

        This notification may be suppressed under the following
        conditions:
        - depending on the value of the rosMgmtOpticalNotifyEnable and rosMgmtOpticalPortNotifyEnable objects.
        "
    ::={ rosMgmtOpticalTransceiverNotifications 12 }
   
rosMgmtOpticalTransceiverLaserLifeAlarmTrap   NOTIFICATION-TYPE
    OBJECTS     {  rosMgmtOpticalTransceiverParameterValue,
                   rosMgmtOpticalTransceiverParamAlarmStatus  }

    STATUS      current
    DESCRIPTION
        "This notification is sent when the optical module password cheching is successful.

        This notification may be suppressed under the following
        conditions:
        - depending on the value of the rosMgmtOpticalNotifyEnable and rosMgmtOpticalPortNotifyEnable objects.
        "
    ::={ rosMgmtOpticalTransceiverNotifications 13 }
   
rosMgmtOpticalTransceiverLaserLifeAlarmNormalTrap   NOTIFICATION-TYPE
    OBJECTS     {  rosMgmtOpticalTransceiverParameterValue,
                   rosMgmtOpticalTransceiverParamAlarmStatus  }

    STATUS      current
    DESCRIPTION
        "This notification is sent when the optical module password cheching is successful.

        This notification may be suppressed under the following
        conditions:
        - depending on the value of the rosMgmtOpticalNotifyEnable and rosMgmtOpticalPortNotifyEnable objects.
        "
    ::={ rosMgmtOpticalTransceiverNotifications 14 }

rosMgmtOpticalTransceiverParamLowAlarmTrap    NOTIFICATION-TYPE
    OBJECTS     {  rosMgmtOpticalTransceiverParameterValue,
                   rosMgmtOpticalTransceiverParamAlarmStatus  }
    STATUS      current
    DESCRIPTION
        "This notification is sent when the optical module parameter value increase to above 
         the high alarm threshold or dicrease to under the low alarm threshold.


        This notification may be suppressed under the following
        conditions:
        - depending on the value of the rosMgmtOpticalNotifyEnable and rosMgmtOpticalPortNotifyEnable objects.
        "
    ::={ rosMgmtOpticalTransceiverNotifications 15 }


rosMgmtOpticalTransceiverParamLowAlarmNormalTrap    NOTIFICATION-TYPE
    OBJECTS     {  rosMgmtOpticalTransceiverParameterValue,
                   rosMgmtOpticalTransceiverParamAlarmStatus  }
    STATUS      current
    DESCRIPTION
        "This notification is sent when the optical module parameter value increase to above 
         the high alarm threshold or dicrease to under the low alarm threshold.


        This notification may be suppressed under the following
        conditions:
        - depending on the value of the rosMgmtOpticalNotifyEnable and rosMgmtOpticalPortNotifyEnable objects.
        "
    ::={ rosMgmtOpticalTransceiverNotifications 16 } 
    
rosMgmtOpticalTransceiverParamLowWarningTrap    NOTIFICATION-TYPE
    OBJECTS     {  rosMgmtOpticalTransceiverParameterValue,
                   rosMgmtOpticalTransceiverParamAlarmStatus  }
    STATUS      current
    DESCRIPTION
        "This notification is sent when the optical module parameter value increase to above 
         the high alarm threshold or dicrease to under the low alarm threshold.


        This notification may be suppressed under the following
        conditions:
        - depending on the value of the rosMgmtOpticalNotifyEnable and rosMgmtOpticalPortNotifyEnable objects.
        "
    ::={ rosMgmtOpticalTransceiverNotifications 17 }

rosMgmtOpticalTransceiverParamLowWarningNormalTrap    NOTIFICATION-TYPE
    OBJECTS     {  rosMgmtOpticalTransceiverParameterValue,
                   rosMgmtOpticalTransceiverParamAlarmStatus  }
    STATUS      current
    DESCRIPTION
        "This notification is sent when the optical module parameter value increase to above 
         the high alarm threshold or dicrease to under the low alarm threshold.


        This notification may be suppressed under the following
        conditions:
        - depending on the value of the rosMgmtOpticalNotifyEnable and rosMgmtOpticalPortNotifyEnable objects.
        "
    ::={ rosMgmtOpticalTransceiverNotifications 18 }

rosMgmtOpticalTransceiverTxFaultTrap   NOTIFICATION-TYPE
    OBJECTS     {  rosMgmtOpticalTransceiverTxFaultStatus  }
    STATUS      current
    DESCRIPTION
        "This notification is sent when the SFP optical module occures Tx-fault signal.

        This notification may be suppressed under the following
        conditions:
        - depending on the value of the rosMgmtOpticalNotifyEnable and rosMgmtOpticalPortNotifyEnable objects.
        "
    ::={ rosMgmtOpticalTransceiverNotifications 19 }
    
rosMgmtOpticalTransceiverTxNormalTrap   NOTIFICATION-TYPE
    OBJECTS     {  rosMgmtOpticalTransceiverTxFaultStatus }
    STATUS      current
    DESCRIPTION
        "This notification is sent when the SFP optical module cancels the Tx-fault signal.

        This notification may be suppressed under the following
        conditions:
        - depending on the value of the rosMgmtOpticalNotifyEnable and rosMgmtOpticalPortNotifyEnable objects.
        "
    ::={ rosMgmtOpticalTransceiverNotifications 20 }
        
-- Textual Conventions
EnableVar ::= TEXTUAL-CONVENTION                                
    STATUS      current
    DESCRIPTION
        "enable or disable a function."
    SYNTAX    INTEGER {
                       enable(1),
                       disable(2)
                      } 
     	
OpticalParameterType ::= TEXTUAL-CONVENTION
    STATUS    current
    DESCRIPTION
        "This value indicates the optical parameter that is
        being monitored. Valid values are -OpticalParameterType 

        transceiverTemperature(1)   		:transceiver temperature
        txbiasCurrent(2)         		:TX bias current
        txPower(3)       			:TX output power
        rxPower(4)       			:RX received optical power
        laserTemperature(5)     		:laser temperature
        p5V0supplyVoltage(6)     		:+5V supply voltage
        p3V3supplyVoltage(7)    		:+3.3V supply voltage
        p1V8supplyVoltage(8)     		:+1.8V supply voltage
        n5V2supplyVoltage(9)    		:-5.2V supply voltage
        apdBiasVoltage(10)    		:APD bias voltage
        p5V0supplyCurrent(11)     		:+5V supply currnet
        p3V3supplyCurrent(12)    		:+3.3V supply currnet
        p1V8supplyCurrent(13)     		:+1.8V supply currnet
        n5V2supplyCurrent(14)     		:-5.2V supply currnet
        tecCurrent(15)          		:TEC currnet
        laserWavelength(16)      		:laser wavelength

       " 
        
    SYNTAX    INTEGER {
			        transceiverTemperature (1),   
        			txbiasCurrent (2),          
        			txPower (3),       
       			    rxPower (4),       
        			laserTemperature(5),     
        			p5V0supplyVoltage(6),     
        			p3V3supplyVoltage(7),    
        			p1V8supplyVoltage(8),     
        			n5V2supplyVoltage(9),     
        			apdBiasVoltage(10),     
        			p5V0supplyCurrent(11),     
        			p3V3supplyCurrent(12),    
        			p1V8supplyCurrent(13),     
        			n5V2supplyCurrent(14),    
        			tecCurrent(15),          
       			    laserWavelength(16)
   
              }


OpticalParameterValue ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d-2"
    STATUS    current
    DESCRIPTION
        "The value of the optical parameter that is being monitored.
              The range of values varies depending on the type of optical  parameter being monitored,
        as identified by a corresponding object with syntax OpticalParameterType.
              When the optical parameter being monitored is 'XXTemperature',the supported range 
        is from -40000 to 125000, in units of  1/1000 degrees centigrade.
        Example: A value of 23500 represents a temperature reading of 23.5 degrees C.
        The temperature is shown in unit of degrees centigrade, and the precision is 0.1.        
              When the optical parameter being monitored is 'txbiasCurrent',the supported range
        is from 0 to 131000, in units of 1/1000 mA.
        Example: A value of 1000 represents a TX bias current reading of 1.0mA. 
        The 'txbiasCurrent'is shown in unit of mA, and the precision is 0.1.
              When the optical parameter being monitored is 'txPower',the supported range
       is from -40000 to 8200, in units of 1/1000 dbm.
        Example: A value of 77800 represents a TX output power reading of 7.78 dBm.
        The 'txPower' is shown in unit of dBm, and the precision is 0.1.
              When the optical parameter being monitored is 'rxPower',the supported range
        is from -40000 to 8200, in units of 1/1000 dbm.
        Example: A value of 7780 represents a RX received optical power reading of 7.78 dBm. 
        The 'rxPower' is shown in unit of dBm, and the precision is 0.1.
              When the optical parameter being monitored is 'XXsupplyVoltage',the supported range
        is from 0 to 6550, in units of 1/1000 V. 
		Example: A value of 6000 represents a XX supply Voltage eading of 6.00V.
		The 'XXsupplyVoltage'is shown in unit of V, and the precision is 0.01.
              When the optical parameter being monitored is 'apdBiasVoltage,the supported range
        is from 0 to 655300 , in units of 1/1000 V . 
		Example: A value of 600000 represents a APD BiasVoltage reading of 600.0V.
		The 'apdBiasVoltage' is shown in unit of V, and the precision is 0.1.
              When the optical parameter being monitored is 'XXsupplyCurrent',the supported range
        is from 0 to 6553600, in units of 1/1000 mA . 
        Example: A value of 6000000 represents a XX supply current reading of 6000.0mA. 
        The 'XXsupplyCurrent' is shown in unit of mA, and the precision is 0.1.
              When the optical parameter being monitored is 'tecCurrent',the supported range
        is from 0 to 6553600, in units of 1/1000 mA . 
        Example: A value of 6000000 represents a TEC Current reading of 6000.0mA.
        The 'tecCurrent' is shown in unit of mA, and the precision is 0.1.
              When the optical parameter being monitored is 'laserWavelength,the supported range
        is from 0 to 3276750, in units of 1/1000 nm . 
        Example: A value of 3000000 represents a laser wavelength reading of 3000.0nm.
        The 'laserWavelength'is shown in unit of nm, and the precision is 0.01.
      "
    SYNTAX    Integer32 (-1000000 | -40000..6553600)

OpticalPMPeriod ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "This value indicates the time period over which performance
        monitoring data has been collected."
    SYNTAX      INTEGER {
                    fifteenMin(1),
                    twentyFourHour(2)
                } 
                
-- MIB Scalar Group Definitions

rosMgmtOpticalTransceiverScalarGroup       OBJECT IDENTIFIER ::=
                                        {rosMgmtOpticalTransceiverObjects 1 }   
                                        
rosMgmtOpticalTransceiverNotifyEnable OBJECT-TYPE
    SYNTAX      EnableVar
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object specifies the generation of device notifications,
         enable or disable.  
         
         this object belongs to xfp and sfp.
        "
    DEFVAL { disable }
    ::={ rosMgmtOpticalTransceiverScalarGroup 1 }

rosMgmtOpticalTransceiverDDMEnable OBJECT-TYPE
    SYNTAX      EnableVar
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Enable or disable digitaldiagnotic on the device.
        
        this object belongs to xfp and sfp.
        "
    DEFVAL { disable}
    ::={ rosMgmtOpticalTransceiverScalarGroup 2 }

rosMgmtOpticalTransceiverCheckPwdEnable OBJECT-TYPE
    SYNTAX      EnableVar
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object specifies the status of password checking on the device,
         enable or disable. 
         
         this object belongs to xfp.
        "
    DEFVAL { disable}
    ::={ rosMgmtOpticalTransceiverScalarGroup 3 }

rosMgmtOpticalTransceiverPollInterval OBJECT-TYPE
    SYNTAX        Integer32  (5..15)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object specifies the value of poll-interval on the device.
        
        this object belongs to xfp and sfp.
        "
    ::={ rosMgmtOpticalTransceiverScalarGroup 4 }

rosMgmtOpticalTransceiverCRCCheckEnable OBJECT-TYPE
    SYNTAX      EnableVar
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object specifies the status of crc checking on the device,
         enable or disable. 
         
         this object belongs to sfp and xfp.
        "
    DEFVAL { disable}
    ::={ rosMgmtOpticalTransceiverScalarGroup 5 }    
-- MIB Object Definitions

rosMgmtOpticalTransceiverCfgObjects        OBJECT IDENTIFIER ::=
                                        {rosMgmtOpticalTransceiverObjects 2 }

-- groups in this MIB module   
rosMgmtOpticalTransceiverInfoGroup               OBJECT IDENTIFIER ::=
                                        {rosMgmtOpticalTransceiverCfgObjects 1 }

rosMgmtOpticalTransceiverDDMGroup                OBJECT IDENTIFIER ::=
                                        {rosMgmtOpticalTransceiverCfgObjects 2 }

rosMgmtOpticalTransceiverPMGroup                 OBJECT IDENTIFIER ::=
                                        {rosMgmtOpticalTransceiverCfgObjects 3 }  
                                        
rosMgmtOpticalTransceiverStatusGroup             OBJECT IDENTIFIER ::=
                                        {rosMgmtOpticalTransceiverCfgObjects 4 }

-- rosMgmtOpticalTransceiverInfoTable

rosMgmtOpticalTransceiverInfoTable OBJECT-TYPE
        SYNTAX SEQUENCE OF RosMgmtOpticalTransceiverInfoEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Trancetver information Table."
        ::= { rosMgmtOpticalTransceiverInfoGroup 1 }

rosMgmtOpticalTransceiverInfoEntry OBJECT-TYPE
    SYNTAX      RosMgmtOpticalTransceiverInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry in the rosMgmtOpticalTransceiverInfoTable."
    INDEX        { ifIndex }
    ::={ rosMgmtOpticalTransceiverInfoTable 1 }


RosMgmtOpticalTransceiverInfoEntry ::= SEQUENCE {
	rosMgmtOpticalTransceiverType                   INTEGER,
	rosMgmtOpticalTransceiverConnectorType          INTEGER,
	rosMgmtOpticalTransceiverVendorName             OCTET STRING,
	rosMgmtOpticalTransceiverVendorPN               OCTET STRING,
	rosMgmtOpticalTransceiverVendorSN               OCTET STRING,
	rosMgmtOpticalTransceiverMediaType              INTEGER,
	rosMgmtOpticalTransceiverTransmissionDistance   Integer32,  
	rosMgmtOpticalTransceiverAbility                Unsigned32,
	rosMgmtOpticalTransceiverDDM                    INTEGER,
	rosMgmtOpticalTransceiverCalibrationType        INTEGER,
	rosMgmtOpticalTransceiverRSSI                   INTEGER,
	rosMgmtOpticalTransceiverVendorRev              OCTET STRING,
	rosMgmtOpticalTransceiverBRMax                  Integer32,
	rosMgmtOpticalTransceiverBRMin                  Integer32,
	rosMgmtOpticalTransceiverWavelengthContrl       INTEGER,	 
	rosMgmtOpticalTransceiverWavelength             Integer32,
	rosMgmtOpticalTransceiverWaveTolerance          Integer32,
	rosMgmtOpticalTransceiverCompatibility          OCTET STRING,
	rosMgmtOpticalTransceiverPowerDissipation       INTEGER,
	rosMgmtOpticalTransceiverCDR                    INTEGER,
	rosMgmtOpticalTransceiverRefClock               INTEGER,
	rosMgmtOpticalTransceiverTransmitterType        INTEGER,
	rosMgmtOpticalTransceiverCooled	                INTEGER,
	rosMgmtOpticalTransceiverTunalbe                INTEGER,
	rosMgmtOpticalTransceiverDetectorType           INTEGER,
	rosMgmtOpticalTransceiverLineLoopBack           INTEGER,
	rosMgmtOpticalTransceiverXFILoopBack            INTEGER,
	rosMgmtOpticalTransceiverVps                    INTEGER,
	rosMgmtOpticalTransceiverTxDis                  INTEGER,
	rosMgmtOpticalTransceiverStandby                INTEGER,
	rosMgmtOpticalTransceiverInVpsLowPower          INTEGER,
	rosMgmtOpticalTransceiverOutVpsLowPower         INTEGER,
	rosMgmtOpticalTransceiverFEC                    INTEGER,
	rosMgmtOpticalTransceiverCMU                    INTEGER,
	rosMgmtOpticalTransceiverBR                     INTEGER

}

rosMgmtOpticalTransceiverType OBJECT-TYPE
		SYNTAX  INTEGER{ 
						unknown(1),
	 			        gbic(2),
	       			    soldered(3),
						sfp(4),
						xbi(5),
						xenpak(6),
						xfp(7),
						xff(8),
						xfpe(9),
						xpak(10),
						x2(11),
						sfpj(12),
						qsfp(14),
						qsfp28(18)						
	       			   }
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"This object specifies the physical type of the transceiver, 
			such as xfp or sfp , and so on.
			
			this object belongs to xfp and sfp.
			"
		::= { rosMgmtOpticalTransceiverInfoEntry 1 }
		
rosMgmtOpticalTransceiverConnectorType OBJECT-TYPE
		SYNTAX  INTEGER
		{
 			unknown(1),
       		sc (2),
			db9(3),
			hssdc(4),
			bnctnc(5),
			fibercoaxialhead(6),
			fiberjack(7),
			lc(8),
			mtrj(9),
			mu(10),
			sg(11),  
			fiberpigtail(12),
			mpoparalleloptic(13),
			hssdcII (14),
			copper (15),
			rj45 (16)
       	}
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"This object specifies the connector type of the transceiver,
             unknown, sc, db9, hssdc, bnc_tnc, fiber_coaxial_head, fiber_outlet, 
             lc, mt_rj, mu, sg, fiber_pigtail, mpo_parallel_optic , hssdcII, 
             copper, rj45. 
             
             this object belongs to xfp and sfp.
			"
		::= { rosMgmtOpticalTransceiverInfoEntry 2 }
				
rosMgmtOpticalTransceiverVendorName OBJECT-TYPE
		SYNTAX	OCTET STRING
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"Vendor name of the interface.
			
			 this object belongs to xfp and sfp.
			"
		::= { rosMgmtOpticalTransceiverInfoEntry 3 }
		
rosMgmtOpticalTransceiverVendorPN OBJECT-TYPE
		SYNTAX	OCTET STRING
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"Vendor part number of the interface.
			
			this object belongs to xfp and sfp.
			"
		::= { rosMgmtOpticalTransceiverInfoEntry 4 }
		
rosMgmtOpticalTransceiverVendorSN OBJECT-TYPE
		SYNTAX	OCTET STRING
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"Vendor serial number of the interface.
			
			this object belongs to xfp and sfp.
			"
		::= { rosMgmtOpticalTransceiverInfoEntry 5 }
		
rosMgmtOpticalTransceiverMediaType OBJECT-TYPE
	   SYNTAX INTEGER
       {
            singlemode(1),
            multimodeE50(2),
            multimode50(3),
            multimode625(4),
            copper(5),
            singlemodeKm(6), 
            multimodeOM3(7),
            multimodeOM3Qsfp(8), 
            multimodeOM2Qsfp(9), 
            multimodeOM1Qsfp(10), 
            multimodeOM4Qsfp(11)
        }
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"Types of the fiber, 
            single_mode, multi_modeE50, multi_mode50,multi_mode625,copper,
            single_modeKm,multi_modeOM3,multi_modeOM3Qsfp,multi_modeOM2Qsfp, 
            multi_modeOM1Qsfp,multi_modeOM4Qsfp. 
            
            this object belongs to xfp, sfp and qsfp.
			"
		::= { rosMgmtOpticalTransceiverInfoEntry 6 }
		
rosMgmtOpticalTransceiverTransmissionDistance OBJECT-TYPE
		SYNTAX	Integer32
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"The max distance which the interface could transmit,
             measured in meter.
             The object will be shown in unit of Km, and the precision is 0.001.
             
             this object belongs to xfp and sfp.
            "
		::= { rosMgmtOpticalTransceiverInfoEntry 7 }		

rosMgmtOpticalTransceiverAbility  OBJECT-TYPE
		SYNTAX	Unsigned32
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"This object specifies the ability of optical module digitaldiagnotic
			 funtion. Currently, the digitaldiagnotic objects of our optical module 
			 inculde 16 parameters.   
			 
			 this object has 32 bits, each bit represents a digital diagnotic parameter.
			 if the bit value is 0, it means that the optical module does not provide 
			 digital diagnotic funtion for relative parameter.if the bit value is 1,it 
			 means that the optical module provides digital diagnotic funtion for
			 relative parameter.
			 
			 this object belongs to xfp and sfp.
			 
			 The relation between parameters and bits is following: 
			32...16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1:
			The relation between parameters and bits is following: 
			32...16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1:			
			| 1bit                 | 2bit                 | 3bit                 | 4bit           
			| APD Bias voltage     | 0(reserve)           | TEC Current          | Laser temperature

			| 5bit                 | 6bit                 |7bit                  | 8bit
			| Laser wavelength     | +5V Supply voltage   | +3.3V Supply voltage | +1.8V Supply voltage

			| 9bit                 | 10bit                |11bit                 | 12bit
			| -5.2V Supply voltage | +5V Supply current   | 0(None)              | 0(None)

			| 13bit                | 14bit                | 15bit                | 16bit 
			| +3.3V Supply current | +1.8V Supply current | -5.2V Supply current | temperature

			| 17bit                | 18bit                | 19bit                | 20bit ~ 32bit 
			| Laser bias current   | Rx power             |Tx power              |  0

            But when the optical module is sfp, the 6 bit will represents 
            the supplyVoltage of sfp.
            "
		::= { rosMgmtOpticalTransceiverInfoEntry 8 }		      
		
rosMgmtOpticalTransceiverDDM     OBJECT-TYPE
		SYNTAX  INTEGER{
	 			        support(1),
	       			    notsupport(2)
	       			   }
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"This object specifies if the transceiver supports on digital diagnostic function, 
			support or not support.To the xfp, the default value of this object is support.
			
			this object belongs to xfp and sfp.
			"
		::= { rosMgmtOpticalTransceiverInfoEntry 9 }
		
rosMgmtOpticalTransceiverCalibrationType   OBJECT-TYPE
		SYNTAX  INTEGER{ 
						unknown(1),
	 			        internal(2),
	       			    external(3)
	      			   }
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"This object specifies the calibration type of the transceiver, 
			internal, external, unknown.
			
			this object belongs to xfp and sfp.
			"
		::= { rosMgmtOpticalTransceiverInfoEntry 10 }
		
rosMgmtOpticalTransceiverRSSI   OBJECT-TYPE
		SYNTAX  INTEGER{
	 			        support(1),
	       			    notsupport(2)
	       			   }
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"This object specifies the calibration type of the transceiver, 
			support or not support.
			
			this object belongs to xfp and sfp.
			"
		::= { rosMgmtOpticalTransceiverInfoEntry 11 }
 
rosMgmtOpticalTransceiverVendorRev    OBJECT-TYPE
		SYNTAX	OCTET STRING
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			" the version number of the transceiver.
			 this object belongs to xfp and sfp.
			"
		::= { rosMgmtOpticalTransceiverInfoEntry 12 }   

rosMgmtOpticalTransceiverBRMax      OBJECT-TYPE
		SYNTAX	Integer32 
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			" the min data rate of the transceiver,mesured in Mbps .
			  this object belongs to xfp and sfp.

			The object will be shown in unit of Gbps, and the precision is 0.1.
			"
		::= { rosMgmtOpticalTransceiverInfoEntry 13 } 
		
rosMgmtOpticalTransceiverBRMin       OBJECT-TYPE
		SYNTAX	Integer32 
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			" the min data rate of the transceiver,mesured in Mbps.
			
			  this object belongs to xfp and sfp.To the sfp, 
			  the min data rate value is equal to the max data rate value. 
			  
			  The object will be shown in unit of Gbps, and the precision is 0.1.
			 "
		::= { rosMgmtOpticalTransceiverInfoEntry 14 }  

rosMgmtOpticalTransceiverWavelengthContrl   OBJECT-TYPE
		SYNTAX	INTEGER
		{
	       support(1),
     	   notsupport (2)
        }
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"if the transceiver supports on wavelength control
			support,notsupport.
			this object belongs to xfp.
			"
		::= { rosMgmtOpticalTransceiverInfoEntry 15 }

rosMgmtOpticalTransceiverWavelength OBJECT-TYPE
		SYNTAX	Integer32
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"Wavelength of the interface, measured in pm(0.001nm).
			 this object belongs to xfp.
			 The object will be shown in unit of nm, and the precision is 0.01.
			"
		::= { rosMgmtOpticalTransceiverInfoEntry 16 }

rosMgmtOpticalTransceiverWaveTolerance   OBJECT-TYPE
		SYNTAX	Integer32
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"the range of laser wavelength from nominal wavelength,mesured in pm(0.001*nm).
			 this object belongs to xfp.
			 The object will be shown in unit of nm, and the precision is 0.01.
			"
		::= { rosMgmtOpticalTransceiverInfoEntry 17 }    

rosMgmtOpticalTransceiverCompatibility   OBJECT-TYPE
		SYNTAX	OCTET STRING
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"the compatibility type that the transceiver supports,such as 10GBASE-SR.
			this object belongs to xfp.
			"
		::= { rosMgmtOpticalTransceiverInfoEntry 18 } 

rosMgmtOpticalTransceiverPowerDissipation   OBJECT-TYPE
		SYNTAX	INTEGER
		{
 			p1W5(1),
       		p2W5(2),
			p3W5(3),
			exceed(4)
       	}
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"the max power dissipation of the transceiver, 
			p1W5,p2W5,p3W5,exceed3W5.
			this object belongs to xfp.
			"
		::= { rosMgmtOpticalTransceiverInfoEntry 19 } 

rosMgmtOpticalTransceiverCDR             OBJECT-TYPE
		SYNTAX	INTEGER
		{
 		   support(1),
           notsupport(2)
        }
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"the optical module supports on CDR fundtion.
			support,notsupport.
			this object belongs to xfp.
			"
		::= { rosMgmtOpticalTransceiverInfoEntry 20 } 

rosMgmtOpticalTransceiverRefClock           OBJECT-TYPE
		SYNTAX	INTEGER
		{
 	       required(1),
     	   notrequired (2)
        }
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			" if the transceiver requires outside reference clock
			required,notrequired.
			this object belongs to xfp.
			"
		::= { rosMgmtOpticalTransceiverInfoEntry 21 }
		
rosMgmtOpticalTransceiverTransmitterType     OBJECT-TYPE
		SYNTAX  INTEGER
		{
			vcsel850nm(1),
			vcsel1310nm(2),
			vcsel1550nm(3),
			fp1310nm(4),
			dfb1310nm(5),
			dfb1550nm(6),
			eml1310nm(7),
			eml1550nm(8),
			copperothers(9)
       }

		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"The transmitter type of the transceiver,such as 850 nm VCSEL.
			this object belongs to xfp.
			"
		::= { rosMgmtOpticalTransceiverInfoEntry 22 }
		
rosMgmtOpticalTransceiverCooled	         OBJECT-TYPE
		SYNTAX	INTEGER
		{
 	       cooled(1),
     	   uncooled (2)
        }
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"The transmitter cooled type of the transceiver
			 cooled,uncooled.
			 this object belongs to xfp.
			 "
		::= { rosMgmtOpticalTransceiverInfoEntry 24 }
		
rosMgmtOpticalTransceiverTunalbe            OBJECT-TYPE
		SYNTAX	INTEGER
		{
 	       tunable (1),
    	   untunable (2)
        }
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"The transmitter tunable type of the transceiver
			tunable,untunable.
			this object belongs to xfp.
			"
		::= { rosMgmtOpticalTransceiverInfoEntry 25 }
		
rosMgmtOpticalTransceiverDetectorType       OBJECT-TYPE
		SYNTAX	INTEGER
		{
	       pin(1),
		   apd(2)
	    }
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"The detector type of the transceiver
			 pin, apd.
			 this object belongs to xfp.
			 "
		::= { rosMgmtOpticalTransceiverInfoEntry 26 }
		
rosMgmtOpticalTransceiverLineLoopBack       OBJECT-TYPE
		SYNTAX	INTEGER
		{
 			support(1),
       		notsupport(2)
       	}
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"The transceiver support status of sideline loop-back control
			support,notsupport.
			this object belongs to xfp.
			"
		::= { rosMgmtOpticalTransceiverInfoEntry 27 }
		
rosMgmtOpticalTransceiverXFILoopBack        OBJECT-TYPE
		SYNTAX	INTEGER
		{
 			support(1),
       		notsupport(2)
       	}
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"The transceiver support status of XFI loop-back control
			support,notsupport.
			this object belongs to xfp.
			"
		::= { rosMgmtOpticalTransceiverInfoEntry 28 }
		
rosMgmtOpticalTransceiverVps                OBJECT-TYPE
		SYNTAX	INTEGER
		{
 			support(1),
       		notsupport(2)
       	}
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"This object specifies if the optical module supports on VPS
			support,notsupport.
			this object belongs to xfp.
			"
		::= { rosMgmtOpticalTransceiverInfoEntry 29 }
		
rosMgmtOpticalTransceiverTxDis              OBJECT-TYPE
		SYNTAX	INTEGER
		{
 			support(1),
       		notsupport(2)
       	}
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"The transceiver support status of software control the transmitter status
			support,notsupport.
			this object belongs to xfp.
			"
		::= { rosMgmtOpticalTransceiverInfoEntry 30 }
		
rosMgmtOpticalTransceiverStandby              OBJECT-TYPE
		SYNTAX	INTEGER
		{
 			support(1),
       		notsupport(2)
       	}
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"The transceiver support status of software control the standby mode.
			support,notsupport.
			this object belongs to xfp.
			"
		::= { rosMgmtOpticalTransceiverInfoEntry 31 }
		
rosMgmtOpticalTransceiverInVpsLowPower      OBJECT-TYPE
		SYNTAX	INTEGER
		{
 			support(1),
       		notsupport(2)
       	}
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"The VPS in low power support status of the transceiver
			support,notsupport.
			this object belongs to xfp.
			"
		::= { rosMgmtOpticalTransceiverInfoEntry 32 }
		
rosMgmtOpticalTransceiverOutVpsLowPower     OBJECT-TYPE
		SYNTAX	INTEGER
		{
 			support(1),
       		notsupport(2)
       	}
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"The VPS out low power support status of the transceiver
			support,notsupport.
			this object belongs to xfp.
			"
		::= { rosMgmtOpticalTransceiverInfoEntry 33 }
		
rosMgmtOpticalTransceiverFEC                OBJECT-TYPE
		SYNTAX	INTEGER
		{
 			support(1),
       		notsupport(2)
       	}
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"The FEC support status of transceiver
			support,notsupport.
			this object belongs to xfp.
			"
		::= { rosMgmtOpticalTransceiverInfoEntry 34 }
		
rosMgmtOpticalTransceiverCMU                OBJECT-TYPE
		SYNTAX	INTEGER
		{
 			support(1),
       		notsupport(2)
       	}
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"The CMU support status of transceiver
			support,notsupport.
			this object belongs to xfp.
			"
		::= { rosMgmtOpticalTransceiverInfoEntry 35 }
		
rosMgmtOpticalTransceiverBR OBJECT-TYPE
		SYNTAX  INTEGER
		{
 			unknown(0),
 			bitrate125Mbps(1),
       		bitrate155Mbps (2),
			bitrate622Mbps(6),
			bitrate1250Mbps(12),  
			bitrate1DOT25Gbps(13),
			bitrate2DOT5Gbps(19),
			bitrate10GbpsOr100Gbps1(103),
			bitrate100Gbps2(114),
			bitrate25Gbps(255)
       	}
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"This object specifies the Nominal bitrate of the transceiver,
             125Mbps, 155Mbps, 622Mbps, 1.25Gbps, 2.5Gbps, 10Gbps, 100Gbps, 25Gbps. 
             
             this object belongs to xfp and sfp and qsfp and qsfp28.
			"
		::= { rosMgmtOpticalTransceiverInfoEntry 36 }
		
-- rosMgmtOpticalDDMTable

rosMgmtOpticalTransceiverDDMTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF RosMgmtOpticalTransceiverDDMEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table provides objects to monitor optical
        parameters in a network element. "
    ::={ rosMgmtOpticalTransceiverDDMGroup 1 }

rosMgmtOpticalTransceiverDDMEntry OBJECT-TYPE
    SYNTAX      RosMgmtOpticalTransceiverDDMEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry in the rosMgmtOpticalTransceiverMonTable provides objects to
        monitor an optical parameter at an optical interface.
        "
    INDEX        { 	ifIndex, 
		rosMgmtOpticalTransceiverParameterType
	}
    ::={ rosMgmtOpticalTransceiverDDMTable 1 }
                         
RosMgmtOpticalTransceiverDDMEntry ::= SEQUENCE {
    rosMgmtOpticalTransceiverParameterType               OpticalParameterType,
--    rosMgmtOpticalTransceiverOPType		          INTEGER,
    rosMgmtOpticalTransceiverParameterValue              OpticalParameterValue,
    rosMgmtOpticalTransceiverParamHighAlarmThresh        OpticalParameterValue,
    rosMgmtOpticalTransceiverParamHighWarningThresh      OpticalParameterValue,
    rosMgmtOpticalTransceiverParamLowAlarmThresh         OpticalParameterValue,
    rosMgmtOpticalTransceiverParamLowWarningThresh       OpticalParameterValue,
    rosMgmtOpticalTransceiverParamAlarmStatus            INTEGER,
    rosMgmtOpticalTransceiverParamAlarmLastValue         OpticalParameterValue,
    rosMgmtOpticalTransceiverParamAlarmLastChange        TimeTicks,
    rosMgmtOpticalTransceiverDDM15MinValidIntervals      Unsigned32,
    rosMgmtOpticalTransceiverDDM24HrValidIntervals       Unsigned32,
    rosMgmtOpticalTransceiverDDMValidStatus              INTEGER,
    rosMgmtOpticalTransceiverQsfpParameterValue              OCTET STRING,
    rosMgmtOpticalTransceiverQsfpParamHighAlarmThresh        OCTET STRING,
    rosMgmtOpticalTransceiverQsfpParamHighWarningThresh      OCTET STRING,
    rosMgmtOpticalTransceiverQsfpParamLowAlarmThresh         OCTET STRING,
    rosMgmtOpticalTransceiverQsfpParamLowWarningThresh       OCTET STRING,
    rosMgmtOpticalTransceiverQsfpParamAlarmStatus            OCTET STRING,
    rosMgmtOpticalTransceiverQsfpParamAlarmLastValue         OCTET STRING,
    rosMgmtOpticalTransceiverQsfpParamAlarmLastChange        OCTET STRING,
    rosMgmtOpticalTransceiverQsfpDDM15MinValidIntervals      OCTET STRING,
    rosMgmtOpticalTransceiverQsfpDDM24HrValidIntervals       OCTET STRING,
    rosMgmtOpticalTransceiverQsfpDDMValidStatus              OCTET STRING 
}

rosMgmtOpticalTransceiverParameterType OBJECT-TYPE
    SYNTAX      OpticalParameterType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This object specifies the optical parameter that is being
        monitored in this entry.
        This object belongs to xfp/sfp.
		"
    ::={ rosMgmtOpticalTransceiverDDMEntry 1 }
 
--rosMgmtOpticalTransceiverOPType OBJECT-TYPE 
--	 SYNTAX	INTEGER
--	{
--		others(1),
--		sfp(2),
--		xfp(3),
--		sfpj(4),
--		qsfp(5)
--	}

--    MAX-ACCESS  read-only
--    STATUS      current
--    DESCRIPTION
--        "This object specifies the optical type "
--    ::={ rosMgmtOpticalTransceiverDDMEntry 2 }

rosMgmtOpticalTransceiverParameterValue OBJECT-TYPE
    SYNTAX      OpticalParameterValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object gives the value measured for the particular
        optical parameter specified by the rosMgmtOpticalMonParameterType
        object.
        This object belongs to xfp/sfp.
		"
    ::={ rosMgmtOpticalTransceiverDDMEntry 2 }

rosMgmtOpticalTransceiverParamHighAlarmThresh OBJECT-TYPE
    SYNTAX      OpticalParameterValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object gives the high alarm threshold on the
        optical parameter being monitored.

        An alarm condition will be raised if the value given by
        rosMgmtOpticalParameterValue goes from below the value of 
        this object to above the value of this object, or if
        the initial value of rosMgmtOpticalParameterValue exceeds the value
        of this object. This alarm will be indicated in the 
        rosMgmtOpticalParamAlarmStatus object.
        This object belongs to xfp/sfp.
		"
    ::={ rosMgmtOpticalTransceiverDDMEntry 3 }

rosMgmtOpticalTransceiverParamHighWarningThresh OBJECT-TYPE
    SYNTAX      OpticalParameterValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object is used to set a high warning threshold on
        the optical parameter being monitored.

        A threshold crossing condition will be indicated if the value
        given by rosMgmtOpticalParameterValue goes from below the value
        of this object to above the value of this
        object, or if the initial value of rosMgmtOpticalParameterValue
        exceeds the value of this object. This alarm will be indicated in the 
        rosMgmtOpticalParamAlarmStatus object.
        This object belongs to xfp/sfp.
        "
    ::={ rosMgmtOpticalTransceiverDDMEntry 4 }

rosMgmtOpticalTransceiverParamLowAlarmThresh OBJECT-TYPE
    SYNTAX      OpticalParameterValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object is used to set a low alarm threshold on the
        optical parameter being monitored.

        An alarm condition will be raised if the value given by
        rosMgmtOpticalParameterValue goes from above the value of
        this object to below the value of this object, or if
        the initial value of rosMgmtOpticalParameterValue is lower than the
        value of this object. This alarm
        will be indicated in the rosMgmtOpticalParamAlarmStatus object ..
        This object belongs to xfp/sfp.
		"
    ::={ rosMgmtOpticalTransceiverDDMEntry 5 }

rosMgmtOpticalTransceiverParamLowWarningThresh OBJECT-TYPE
    SYNTAX      OpticalParameterValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object is used to set a low warning threshold on
        the optical parameter being monitored.

        A threshold crossing condition will be indicated if the value
        given by rosMgmtOpticalParameterValue goes from above the value
        of this object to below the value of this
        object, or if the initial value of rosMgmtOpticalParameterValue
        object is lower than the value of this object. For
        network elements in the status
        indications, this threshold violation will be indicated in the
        rosMgmtOpticalParamAlarmStatus object .
        This object belongs to xfp/sfp.
		"
    ::={ rosMgmtOpticalTransceiverDDMEntry 6 }

rosMgmtOpticalTransceiverParamAlarmStatus OBJECT-TYPE
    SYNTAX      INTEGER {
    		              normal(1),
    		              highalarm(2),
                          highwarning(3),
                          lowalarm(4),
                          lowwarning(5)           
                      }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object is used to indicate the current status of
        the thresholds for the monitored optical parameter
        on the interface.

           If a threshold is currently being exceeded on the   
           interface, the object  will be set. Otherwise, 
           the object will be set to 1.
           This object belongs to xfp/sfp.
		"
    ::={ rosMgmtOpticalTransceiverDDMEntry 7 }

rosMgmtOpticalTransceiverParamAlarmLastValue OBJECT-TYPE
    SYNTAX      OpticalParameterValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object indicates the optical parameter value at the last time
        a threshold related to a particular optical parameter was
        exceeded on the interface.
        If no threshold value is currently being
        exceeded, then the value '-1000000' is returned.
        
        This object belongs to xfp/sfp.
		"
    ::={ rosMgmtOpticalTransceiverDDMEntry 8 }

rosMgmtOpticalTransceiverParamAlarmLastChange OBJECT-TYPE
    SYNTAX      TimeTicks
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the value of sysUpTime at the last time
        a threshold related to a particular optical parameter was
        exceeded on the interface.
        
        This object belongs to xfp/sfp.
		"
    ::={ rosMgmtOpticalTransceiverDDMEntry 9 }

rosMgmtOpticalTransceiverDDM15MinValidIntervals OBJECT-TYPE
    SYNTAX      Unsigned32 (0..96)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object gives the number of previous 15 minute
        intervals for which valid performance monitoring data
        has been stored on the interface.

        The value of this object will be n (where n is the maximum
        number of 15 minute intervals supported at this interface),
        unless the measurement was (re-)started within the last
        (nx15) minutes, in which case the value will be the
        number of previous 15 minute intervals for which the agent
        has some data.
        
        This object belongs to xfp/sfp.
		"
    ::={ rosMgmtOpticalTransceiverDDMEntry 10 }

rosMgmtOpticalTransceiverDDM24HrValidIntervals OBJECT-TYPE
    SYNTAX      Unsigned32 (0..7)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object gives the number of previous 24 hour intervals
         for which valid performance monitoring data has been stored
          on the interface. The max value of this object is 7, it 
          means that the user can look up 7days history information.  
          This object belongs to xfp/sfp.
        "
    ::={ rosMgmtOpticalTransceiverDDMEntry 11 }
       
rosMgmtOpticalTransceiverDDMValidStatus OBJECT-TYPE
    SYNTAX      INTEGER {
                    valid(1),
                    invalid(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object indicates the parameter row is valid or invalid.
        The object value is 'valide' when the module is present and 
        supporting digitaldiagnotic. The object value is 'invalid' 
        when the module is absent, or when the module is present and
        not supporting digitaldiagnotic. 
        This object belongs to xfp/sfp.
       "
    ::={ rosMgmtOpticalTransceiverDDMEntry 12 }
rosMgmtOpticalTransceiverQsfpParameterValue OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object gives the value measured for the particular
        optical parameter specified by the rosMgmtOpticalMonParameterType
        object.
        This object belongs to Qsfp.
		"
    ::={ rosMgmtOpticalTransceiverDDMEntry 13 }

rosMgmtOpticalTransceiverQsfpParamHighAlarmThresh OBJECT-TYPE
    SYNTAX      OCTET STRING 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object gives the high alarm threshold on the
        optical parameter being monitored.

        An alarm condition will be raised if the value given by
        rosMgmtOpticalParameterValue goes from below the value of 
        this object to above the value of this object, or if
        the initial value of rosMgmtOpticalParameterValue exceeds the value
        of this object. This alarm will be indicated in the 
        rosMgmtOpticalParamAlarmStatus object.
        This object belongs to Qsfp.
		"
    ::={ rosMgmtOpticalTransceiverDDMEntry 14 }

rosMgmtOpticalTransceiverQsfpParamHighWarningThresh OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object is used to set a high warning threshold on
        the optical parameter being monitored.

        A threshold crossing condition will be indicated if the value
        given by rosMgmtOpticalParameterValue goes from below the value
        of this object to above the value of this
        object, or if the initial value of rosMgmtOpticalParameterValue
        exceeds the value of this object. This alarm will be indicated in the 
        rosMgmtOpticalParamAlarmStatus object.
        This object belongs to Qsfp.
        "
    ::={ rosMgmtOpticalTransceiverDDMEntry 15 }

rosMgmtOpticalTransceiverQsfpParamLowAlarmThresh OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object is used to set a low alarm threshold on the
        optical parameter being monitored.

        An alarm condition will be raised if the value given by
        rosMgmtOpticalParameterValue goes from above the value of
        this object to below the value of this object, or if
        the initial value of rosMgmtOpticalParameterValue is lower than the
        value of this object. This alarm
        will be indicated in the rosMgmtOpticalParamAlarmStatus object ..
        This object belongs to Qsfp.
		"
    ::={ rosMgmtOpticalTransceiverDDMEntry 16 }

rosMgmtOpticalTransceiverQsfpParamLowWarningThresh OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object is used to set a low warning threshold on
        the optical parameter being monitored.

        A threshold crossing condition will be indicated if the value
        given by rosMgmtOpticalParameterValue goes from above the value
        of this object to below the value of this
        object, or if the initial value of rosMgmtOpticalParameterValue
        object is lower than the value of this object. For
        network elements in the status
        indications, this threshold violation will be indicated in the
        rosMgmtOpticalParamAlarmStatus object .
        This object belongs to Qsfp.
		"
    ::={ rosMgmtOpticalTransceiverDDMEntry 17 }

rosMgmtOpticalTransceiverQsfpParamAlarmStatus OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object is used to indicate the current status of
        the thresholds for the monitored optical parameter
        on the interface.

           If a threshold is currently being exceeded on the   
           interface, the object  will be set. Otherwise, 
           the object will be set to 1.
           This object belongs to Qsfp.
		"
    ::={ rosMgmtOpticalTransceiverDDMEntry 18 }

rosMgmtOpticalTransceiverQsfpParamAlarmLastValue OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object indicates the optical parameter value at the last time
        a threshold related to a particular optical parameter was
        exceeded on the interface.
        If no threshold value is currently being
        exceeded, then the value '-1000000' is returned.
        
        This object belongs to Qsfp.
		"
    ::={ rosMgmtOpticalTransceiverDDMEntry 19 }

rosMgmtOpticalTransceiverQsfpParamAlarmLastChange OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the value of sysUpTime at the last time
        a threshold related to a particular optical parameter was
        exceeded on the interface.
        
        This object belongs to Qsfp.
		"
    ::={ rosMgmtOpticalTransceiverDDMEntry 20 }

rosMgmtOpticalTransceiverQsfpDDM15MinValidIntervals OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object gives the number of previous 15 minute
        intervals for which valid performance monitoring data
        has been stored on the interface.

        The value of this object will be n (where n is the maximum
        number of 15 minute intervals supported at this interface),
        unless the measurement was (re-)started within the last
        (nx15) minutes, in which case the value will be the
        number of previous 15 minute intervals for which the agent
        has some data.
        
        This object belongs to Qsfp.
		"
    ::={ rosMgmtOpticalTransceiverDDMEntry 21 }

rosMgmtOpticalTransceiverQsfpDDM24HrValidIntervals OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object gives the number of previous 24 hour intervals
         for which valid performance monitoring data has been stored
          on the interface. The max value of this object is 7, it 
          means that the user can look up 7days history information.  
          This object belongs to Qsfp.
        "
    ::={ rosMgmtOpticalTransceiverDDMEntry 22 }
       
rosMgmtOpticalTransceiverQsfpDDMValidStatus OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object indicates the parameter row is valid or invalid.
        The object value is 'valide' when the module is present and 
        supporting digitaldiagnotic. The object value is 'invalid' 
        when the module is absent, or when the module is present and
        not supporting digitaldiagnotic. 
        This object belongs to Qsfp.
       "
    ::={ rosMgmtOpticalTransceiverDDMEntry 23 }

-- rosMgmtOpticalTransceiverPMCurrent Table
rosMgmtOpticalTransceiverPMCurrentTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF RosMgmtOpticalTransceiverPMCurrentEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains performance monitoring data for the
        various optical parameters, collected over the current 15
        minute or the current 24 hour interval."
    ::={ rosMgmtOpticalTransceiverPMGroup 1 }

rosMgmtOpticalTransceiverPMCurrentEntry OBJECT-TYPE
    SYNTAX      RosMgmtOpticalTransceiverPMCurrentEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry in the rosMgmtOpticalTransceiverPMCurrentTable. It contains
        performance monitoring data for a monitored optical
        parameter at an interface, collected over the current 15
        minute or the current 24 hour interval.
        "
    INDEX       { ifIndex,                  
                  rosMgmtOpticalTransceiverPMCurrentPeriod,
				  rosMgmtOpticalTransceiverPMCurrentParamType }
    ::={ rosMgmtOpticalTransceiverPMCurrentTable 1 }

RosMgmtOpticalTransceiverPMCurrentEntry ::= SEQUENCE {
    rosMgmtOpticalTransceiverPMCurrentPeriod             OpticalPMPeriod,
    rosMgmtOpticalTransceiverPMCurrentParamType          OpticalParameterType,
--    rosMgmtOpticalTransceiverPMType          		  INTEGER,
    rosMgmtOpticalTransceiverPMCurrentMaxParam           OpticalParameterValue,
    rosMgmtOpticalTransceiverPMCurrentMinParam           OpticalParameterValue,
    rosMgmtOpticalTransceiverPMCurrentMeanParam          OpticalParameterValue,
    rosMgmtOpticalTransceiverQsfpPMCurrentMaxParam           OCTET STRING,
    rosMgmtOpticalTransceiverQsfpPMCurrentMinParam           OCTET STRING,
    rosMgmtOpticalTransceiverQsfpPMCurrentMeanParam          OCTET STRING
}

rosMgmtOpticalTransceiverPMCurrentPeriod OBJECT-TYPE
    SYNTAX      OpticalPMPeriod
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This object indicates whether the optical parameter values
        given in this entry are collected over the current 15 minute or
        the current 24 hour interval.
        This object belongs to xfp/sfp.
		"
    ::={ rosMgmtOpticalTransceiverPMCurrentEntry 1 }

rosMgmtOpticalTransceiverPMCurrentParamType OBJECT-TYPE
    SYNTAX      OpticalParameterType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This object specifies the optical parameter that is being
        monitored, in this entry.
        This object belongs to xfp/sfp.
		"
    ::={ rosMgmtOpticalTransceiverPMCurrentEntry 2 }
-- rosMgmtOpticalTransceiverPMType OBJECT-TYPE
--	 SYNTAX	INTEGER
--	{
--		others(1),
--		sfp(2),
--		xfp(3),
--		sfpj(4),
--		qsfp(5)
--	}

--    MAX-ACCESS  read-only
--    STATUS      current
--    DESCRIPTION
--        "This object specifies the optical type "
--    ::={ rosMgmtOpticalTransceiverPMCurrentEntry 3 }

rosMgmtOpticalTransceiverPMCurrentMaxParam OBJECT-TYPE
    SYNTAX      OpticalParameterValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object gives the maximum value measured for the monitored
        optical parameter, in the current 15 minute or the current
        24 hour interval.
        This object belongs to xfp/sfp.
		"
    ::={ rosMgmtOpticalTransceiverPMCurrentEntry 3 }

rosMgmtOpticalTransceiverPMCurrentMinParam OBJECT-TYPE
    SYNTAX      OpticalParameterValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object gives the minimum value measured for the monitored
        optical parameter, in the current 15 minute or the current
        24 hour interval.
        This object belongs to xfp/sfp.
		"
    ::={ rosMgmtOpticalTransceiverPMCurrentEntry 4 }

rosMgmtOpticalTransceiverPMCurrentMeanParam OBJECT-TYPE
    SYNTAX      OpticalParameterValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object gives the average value of the monitored
        optical parameter, in the current 15 minute or the current
        24 hour interval.
        This object belongs to xfp/sfp.
		"
    ::={ rosMgmtOpticalTransceiverPMCurrentEntry 5 }  
rosMgmtOpticalTransceiverQsfpPMCurrentMaxParam OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object gives the maximum value measured for the monitored
        optical parameter, in the current 15 minute or the current
        24 hour interval.
        This object belongs to Qsfp
		"
    ::={ rosMgmtOpticalTransceiverPMCurrentEntry 6 }

rosMgmtOpticalTransceiverQsfpPMCurrentMinParam OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object gives the minimum value measured for the monitored
        optical parameter, in the current 15 minute or the current
        24 hour interval.
        This object belongs to Qsfp.
		"
    ::={ rosMgmtOpticalTransceiverPMCurrentEntry 7 }

rosMgmtOpticalTransceiverQsfpPMCurrentMeanParam OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object gives the average value of the monitored
        optical parameter, in the current 15 minute or the current
        24 hour interval.
        This object belongs to Qsfp.
		"
    ::={ rosMgmtOpticalTransceiverPMCurrentEntry 8 }


-- rosMgmtOpticalTransceiverPMInterval Table

rosMgmtOpticalTransceiverPMIntervalTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF RosMgmtOpticalTransceiverPMIntervalEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table stores performance monitoring data for the
        various optical parameters, collected over previous
        intervals.

        This table can have entries for one complete 24 hour
        interval and up to 96 complete 15 minute
        intervals. A system is required to store at least
        4 completed 15 minute intervals. The number of valid
        15 minute intervals in this table is indicated by the
        rosMgmtOpticalTransceiverDDM15MinValidIntervals object 
        and the number of valid 24 hour intervals is indicated by the
        rosMgmtOpticalTransceiverDDM24HrValidIntervals object.
        
        when the optical module is removed from the device, the relative 
        history records will be cleaned.
        "
    ::={ rosMgmtOpticalTransceiverPMGroup 2 }

rosMgmtOpticalTransceiverPMIntervalEntry OBJECT-TYPE
    SYNTAX      RosMgmtOpticalTransceiverPMIntervalEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry in the rosMgmtOpticalTransceiverPMIntervalTable. It contains
        performance monitoring data for an optical parameter,
        collected over a previous interval.
        "
    INDEX      { ifIndex,
    			 rosMgmtOpticalTransceiverPMIntervalPeriod,
                 rosMgmtOpticalTransceiverPMIntervalNumber,                 
                 rosMgmtOpticalTransceiverPMIntervalParamType }
    ::={ rosMgmtOpticalTransceiverPMIntervalTable 1 }

RosMgmtOpticalTransceiverPMIntervalEntry ::= SEQUENCE {
    rosMgmtOpticalTransceiverPMIntervalPeriod            OpticalPMPeriod,
    rosMgmtOpticalTransceiverPMIntervalNumber            Integer32,
    rosMgmtOpticalTransceiverPMIntervalParamType         OpticalParameterType, 
--    rosMgmtOpticalTransceiverPMIntervalType	          INTEGER,
    rosMgmtOpticalTransceiverPMIntervalMaxParam          OpticalParameterValue,
    rosMgmtOpticalTransceiverPMIntervalMinParam          OpticalParameterValue,
    rosMgmtOpticalTransceiverPMIntervalMeanParam         OpticalParameterValue,
    rosMgmtOpticalTransceiverQsfpPMIntervalMaxParam          OCTET STRING,
    rosMgmtOpticalTransceiverQsfpPMIntervalMinParam          OCTET STRING,
    rosMgmtOpticalTransceiverQsfpPMIntervalMeanParam         OCTET STRING

    }

rosMgmtOpticalTransceiverPMIntervalPeriod OBJECT-TYPE
    SYNTAX      OpticalPMPeriod
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This object indicates whether the optical parameter values,
        given in this entry, are collected over a period of 15 minutes
        or 24 hours.
        This object belongs to xfp/sfp.
		"
    ::={ rosMgmtOpticalTransceiverPMIntervalEntry 1 }

rosMgmtOpticalTransceiverPMIntervalNumber OBJECT-TYPE
    SYNTAX      Integer32 (1..96)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A number between 1 and 96, which identifies the
         interval for which the set of optical parameter values is
         available. The interval identified by 1 is the most recently
         completed 15 minute or 24 hour interval, and the interval
         identified by N is the interval immediately preceding the one
         identified by N-1.
         This object belongs to xfp/sfp.
		"
    ::={ rosMgmtOpticalTransceiverPMIntervalEntry 2 }

rosMgmtOpticalTransceiverPMIntervalParamType OBJECT-TYPE
    SYNTAX      OpticalParameterType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This object specifies the optical parameter that is being
        monitored, in this entry.
        This object belongs to xfp/sfp.
 		"
    ::={ rosMgmtOpticalTransceiverPMIntervalEntry 3 }
    
--rosMgmtOpticalTransceiverPMIntervalType OBJECT-TYPE
--	 SYNTAX	INTEGER
--	{
--		others(1),
--		sfp(2),
--		xfp(3),
--		sfpj(4),
--		qsfp(5)
--	}

--    MAX-ACCESS  read-only
--    STATUS      current
--    DESCRIPTION
--        "This object specifies the optical type "
--    ::={ rosMgmtOpticalTransceiverPMIntervalEntry 4 }

rosMgmtOpticalTransceiverPMIntervalMaxParam OBJECT-TYPE
    SYNTAX      OpticalParameterValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object gives the maximum value measured for the optical
        parameter, in a particular 15 minute or 24 hour interval.
        This object belongs to xfp/sfp.
		"
    ::={ rosMgmtOpticalTransceiverPMIntervalEntry 4 }

rosMgmtOpticalTransceiverPMIntervalMinParam OBJECT-TYPE
    SYNTAX      OpticalParameterValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object gives the minimum value measured for the optical
        parameter, in a particular 15 minute or 24 hour interval.
        This object belongs to xfp/sfp.
		"
    ::={ rosMgmtOpticalTransceiverPMIntervalEntry 5 }

rosMgmtOpticalTransceiverPMIntervalMeanParam OBJECT-TYPE
    SYNTAX      OpticalParameterValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object gives the average value of the measured optical
        parameter, in a particular 15 minute or 24 hour interval.
        This object belongs to xfp/sfp.
		"
    ::={ rosMgmtOpticalTransceiverPMIntervalEntry 6 }
rosMgmtOpticalTransceiverQsfpPMIntervalMaxParam OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object gives the maximum value measured for the optical
        parameter, in a particular 15 minute or 24 hour interval.
        This object belongs to Qsfp.
		"
    ::={ rosMgmtOpticalTransceiverPMIntervalEntry 7 }

rosMgmtOpticalTransceiverQsfpPMIntervalMinParam OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object gives the minimum value measured for the optical
        parameter, in a particular 15 minute or 24 hour interval.
        This object belongs to Qsfp.
		"
    ::={ rosMgmtOpticalTransceiverPMIntervalEntry 8 }

rosMgmtOpticalTransceiverQsfpPMIntervalMeanParam OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object gives the average value of the measured optical
        parameter, in a particular 15 minute or 24 hour interval.
        This object belongs to Qsfp.
		"
    ::={ rosMgmtOpticalTransceiverPMIntervalEntry 9 }

-- rosMgmtOpticalTransceiverCurrentStatus Table
rosMgmtOpticalTransceiverCurrentStatusTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF RosMgmtOpticalTransceiverCurrentStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table stores the hard ware information and the information
        set by user of the transceiver. 
        This object belongs to xfp/sfp.
        "
    ::={ rosMgmtOpticalTransceiverStatusGroup 1 }

rosMgmtOpticalTransceiverCurrentStatusEntry OBJECT-TYPE
    SYNTAX      RosMgmtOpticalTransceiverCurrentStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry in the rosMgmtOpticalTransceiverCurrentStatusTable. It contains
        performance monitoring data for an optical parameter,
        collected over a previous interval.
        This object belongs to xfp/sfp.
        "
    INDEX      { ifIndex   }
    ::={ rosMgmtOpticalTransceiverCurrentStatusTable 1 }

RosMgmtOpticalTransceiverCurrentStatusEntry ::= SEQUENCE {
    rosMgmtOpticalTransceiverHwInfoAbsStatus            INTEGER,
    rosMgmtOpticalTransceiverHwInfoNRStatus            INTEGER,
    rosMgmtOpticalTransceiverHwInfoRxLosStatus         INTEGER,
    rosMgmtOpticalTransceiverHwInfoStandby          INTEGER,
    rosMgmtOpticalTransceiverHwInfoLaser            INTEGER,
    rosMgmtOpticalTransceiverWaveLengthError         Integer32,    
    rosMgmtOpticalTransceiverUserWaveLength          Integer32, 
    rosMgmtOpticalTransceiverUserDataRate                Integer32,
    rosMgmtOpticalTransceiverUserLineLoopBack            INTEGER,
    rosMgmtOpticalTransceiverUserXFILoopBack             INTEGER,
    rosMgmtOpticalTransceiverPortNotifyEnable            EnableVar,
    rosMgmtOpticalTransceiverPortDDMEnable               EnableVar,
    rosMgmtOpticalTransceiverPortCheckPwdEnable          EnableVar,
    rosMgmtOpticalTransceiverTxFaultCount                Integer32, 
    rosMgmtOpticalTransceiverTxFaultCountClear           TruthValue,
    rosMgmtOpticalTransceiverSpecificationCheckStatus    INTEGER,
    rosMgmtOpticalTransceiverTxFaultStatus               INTEGER,
	
    rosMgmtOpticalTransceiverPortCRCCheckEnable          EnableVar,
    rosMgmtOpticalTransceiverBaseCRCCheckStatus          INTEGER,
    rosMgmtOpticalTransceiverStaticDdmCRCCheckStatus     INTEGER,  
    rosMgmtOpticalTransceiverDynamicDdmCRCCheckStatus    INTEGER
    }

rosMgmtOpticalTransceiverHwInfoAbsStatus         OBJECT-TYPE
    SYNTAX      INTEGER
    {
 		absent(1),
    	present(2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies if the optical module is absent
        present,absent.
        This object belongs to xfp and sfp."
    ::={ rosMgmtOpticalTransceiverCurrentStatusEntry 1 }

rosMgmtOpticalTransceiverHwInfoNRStatus          OBJECT-TYPE
    SYNTAX      INTEGER
    {
    	ready(1),
       	notready(2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies if the optical module is ready for operation.
        ready,notready.
        This object belongs to xfp.
        "
    ::={ rosMgmtOpticalTransceiverCurrentStatusEntry 2 }

rosMgmtOpticalTransceiverHwInfoRxLosStatus      OBJECT-TYPE
    SYNTAX      INTEGER
    {
    	 normal(1),
       	 loss(2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies if the optical module operation losses the receiving signal
        normal,loss.
        This object belongs to xfp.
        "
    ::={ rosMgmtOpticalTransceiverCurrentStatusEntry 3 }

rosMgmtOpticalTransceiverHwInfoStandby       OBJECT-TYPE
    SYNTAX      INTEGER
    {
 		normal(1),
       	standby(2)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object specifies if the optical module works under standby mode.
        normal,standby.
        This object belongs to xfp.
        "
    ::={ rosMgmtOpticalTransceiverCurrentStatusEntry 4 }

rosMgmtOpticalTransceiverHwInfoLaser       OBJECT-TYPE
    SYNTAX      INTEGER
    {
 		on(1),
       	off(2)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object specifies if the optical module laser is turned on
        on,off.
        This object belongs to xfp.
        "
    ::={ rosMgmtOpticalTransceiverCurrentStatusEntry 5 }

rosMgmtOpticalTransceiverWaveLengthError         OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies error between the actual wavelength 
        and the wavelength set by the user,measured in pm.
        This object belongs to xfp.
        The object will be shown in unit of nm, and the precision is 0.001.
       "
    ::={ rosMgmtOpticalTransceiverCurrentStatusEntry 6 }   

rosMgmtOpticalTransceiverUserWaveLength          OBJECT-TYPE
    SYNTAX      Integer32(0..3276800)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object specifies the wavelength value of the optical module set by user,measured in pm.
         This object belongs to xfp.
         The object will be shown in unit of nm, and the precision is 0.01.
        "
    ::={ rosMgmtOpticalTransceiverCurrentStatusEntry 7 }
                                
                                 
rosMgmtOpticalTransceiverUserDataRate                OBJECT-TYPE
    SYNTAX      Integer32(9500..12500) 
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object specifies the data rate of the optical module set by user,measured in Mbps.
         This object belongs to xfp.
         The object will be shown in unit of Gbps, and the precision is 0.1.
        "
    ::={ rosMgmtOpticalTransceiverCurrentStatusEntry 8 }    
     
rosMgmtOpticalTransceiverUserLineLoopBack            OBJECT-TYPE
    SYNTAX      INTEGER
	{
 		normal(1),
       	lineLoopback(2)
	}
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object specifies if the sideline loop-back is tuned on , 
        user can change the loop back mode through the object.
        normal,lineLoopback.
        This object belongs to xfp.
        "
    ::={ rosMgmtOpticalTransceiverCurrentStatusEntry 9 }
    
rosMgmtOpticalTransceiverUserXFILoopBack             OBJECT-TYPE
    SYNTAX      INTEGER
	{
 		normal(1),
       	xfiLoopback(2)
	}
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object specifies if the XFI loop-back is tuned on 
        user can change the loop back mode through the object.
        normal,xfiLoopback.
        This object belongs to xfp.
        "
    ::={ rosMgmtOpticalTransceiverCurrentStatusEntry 10 }    

rosMgmtOpticalTransceiverPortNotifyEnable OBJECT-TYPE
    SYNTAX      EnableVar
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object specifies the generation of a port notifications,
         enable or disable.  
         This object belongs to xfp and sfp.
        "
    DEFVAL { enable}
    ::={ rosMgmtOpticalTransceiverCurrentStatusEntry 11 }

rosMgmtOpticalTransceiverPortDDMEnable OBJECT-TYPE
    SYNTAX      EnableVar
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object specifies the status of digitaldiagnotic on a port, 
         enable or disable.  
         This object belongs to xfp and sfp.
        "
    DEFVAL { enable}
    ::={ rosMgmtOpticalTransceiverCurrentStatusEntry 12 }

rosMgmtOpticalTransceiverPortCheckPwdEnable OBJECT-TYPE
    SYNTAX      EnableVar
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object specifies the status of password checking on a port, 
        enable or disable.  
        This object belongs to xfp.
        "
    DEFVAL { enable}
    ::={ rosMgmtOpticalTransceiverCurrentStatusEntry 13 }  
    
    rosMgmtOpticalTransceiverTxFaultCount OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of tx-fault signals."
    ::={ rosMgmtOpticalTransceiverCurrentStatusEntry 14 }  
    
    rosMgmtOpticalTransceiverTxFaultCountClear OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object specifies clear the statistcs of tx-fault signals."
    ::={ rosMgmtOpticalTransceiverCurrentStatusEntry 15 } 
    
    rosMgmtOpticalTransceiverSpecificationCheckStatus OBJECT-TYPE
    SYNTAX      INTEGER{none(0),accord(1),notaccord(2)}
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the check status, accord(0)specifies 
        the optical module accord with industrial. not-accord(2)
        specifies the optical module not accord with industrial."
    ::={ rosMgmtOpticalTransceiverCurrentStatusEntry 16 } 
    
    rosMgmtOpticalTransceiverTxFaultStatus OBJECT-TYPE
    SYNTAX      INTEGER{normal(1),txfault(2)}
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the tx-fault status."
    ::={ rosMgmtOpticalTransceiverCurrentStatusEntry 17 }
	
    rosMgmtOpticalTransceiverPortCRCCheckEnable OBJECT-TYPE
    SYNTAX      EnableVar   
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object specifies the status of CRC checking on a port, enable or disable.
         This object belongs to sfp and xfp"
    ::={ rosMgmtOpticalTransceiverCurrentStatusEntry 18 }  
    
    rosMgmtOpticalTransceiverBaseCRCCheckStatus OBJECT-TYPE
    SYNTAX      INTEGER
    {
           none(0),
           pass(1),
           notpass(2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the result of base information crc checking."
    ::={ rosMgmtOpticalTransceiverCurrentStatusEntry 19 } 

    rosMgmtOpticalTransceiverStaticDdmCRCCheckStatus OBJECT-TYPE
    SYNTAX      INTEGER
    {
           none(0),
           pass(1),
           notpass(2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the result of static ddm crc checking."
    ::={ rosMgmtOpticalTransceiverCurrentStatusEntry 20 }  
    
    rosMgmtOpticalTransceiverDynamicDdmCRCCheckStatus OBJECT-TYPE
    SYNTAX      INTEGER
    {
           none(0),
           pass(1),
           notpass(2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the result of Dynamic ddm crc checking."
    ::={ rosMgmtOpticalTransceiverCurrentStatusEntry 21 }  
    
END