RAY-MIB DEFINITIONS ::= BEGIN
    IMPORTS
    	enterprises, IpAddress, Gauge
        	FROM RFC1155-SMI
	MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
	Unsigned32, TimeTicks, Counter32, Gauge32, Integer32, Counter64
		FROM SNMPv2-SMI
	DateAndTime, TEXTUAL-CONVENTION
	FROM SNMPv2-TC
	MODULE-COMPLIANCE, OBJECT-GROUP
		FROM SNMPv2-CONF
	mib-2 FROM SNMPv2-SMI
	snmpTraps  
		FROM SNMPv2-MIB;

ray 	MODULE-IDENTITY
    	LAST-UPDATED 	"201610040000Z"
    	ORGANIZATION 	"Racom s.r.o"
    	CONTACT-INFO
		    	"Racom s.r.o
			Mirova 1283
			592 31 Nove Mesto na Morave
			Czech Republic
			Tel: +420 565 659 511
			Fax: +420 565 659 512
			E-mail: racom@racom.eu"
    	DESCRIPTION	"The MIB module defines management objects for RAy product series. Revision 201610040000Z."
    	REVISION 	"201610040000Z"
    	DESCRIPTION	"Latest version of this MIB module"
	::= { racom 1 }

DisplayString ::= OCTET STRING

PhysAddress ::= OCTET STRING

ServiceState ::= TEXTUAL-CONVENTION
      	STATUS      	current
      	DESCRIPTION	"System service or device state."
      	SYNTAX      	INTEGER {
				na (0),	-- service/device state not available
                  		up (1), -- service is running or device is up
                  		down (2)  -- service is not running or device is down
                  		}

AlarmState ::= TEXTUAL-CONVENTION
      	STATUS      	current
      	DESCRIPTION	"Alarm status."
      	SYNTAX      	INTEGER {
				na (0),	-- alarm state not available
                  		up (1), -- alarm up
                  		down (2), -- alarm down
				ack (3) -- alarm up and acknowledged
                  		}

OptionSetting ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION	"Setting of some options."
	SYNTAX		INTEGER {
				na (0),
				on (1),
				off (2)
				}

ModulationList ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION	"Radio channel modulations numerical list"
	SYNTAX		INTEGER {
				na (0),
				qpsk (1),
				qam16 (2),
				qam32 (3),
				qam64 (4),
				qam128 (5),
				qam256 (6)
				}


racom 		OBJECT IDENTIFIER ::= { enterprises 33555 }

station		OBJECT IDENTIFIER ::= {ray 1}
interface	OBJECT IDENTIFIER ::= {ray 2}
statistic	OBJECT IDENTIFIER ::= {ray 3}
rayTraps 	OBJECT IDENTIFIER ::= {ray 10}
ray2Traps 	OBJECT IDENTIFIER ::= {ray 11}

-- station MIB

product 	OBJECT IDENTIFIER ::= {station 1}
info	 	OBJECT IDENTIFIER ::= {station 2}
status	 	OBJECT IDENTIFIER ::= {station 3}
chassis 	OBJECT IDENTIFIER ::= {station 4}
system		OBJECT IDENTIFIER ::= {station 5}
access		OBJECT IDENTIFIER ::= {station 6}
authorization	OBJECT IDENTIFIER ::= {station 7}
alarm		OBJECT IDENTIFIER ::= {station 8}

-- product MIB

productName OBJECT-TYPE
        SYNTAX          DisplayString (SIZE(0..16))
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Product name."
        ::= { product 1 }

serialNumber OBJECT-TYPE
        SYNTAX          Gauge32 
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Product serial number."
        ::= { product 2 }

unitType OBJECT-TYPE
        SYNTAX          DisplayString (SIZE(0..4))
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Station type (L or H) and number of the Ethernet ports (1 or 2)."
        ::= { product 3 }

-- info MIB

deviceName OBJECT-TYPE
        SYNTAX          DisplayString (SIZE(0..16))
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Station name."
        ::= { info 1 }

swVer OBJECT-TYPE
        SYNTAX          DisplayString (SIZE(0..16))
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Firmware version."
        ::= { info 2 }

swVerRadio OBJECT-TYPE
        SYNTAX          DisplayString (SIZE(0..16))
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Radio firmware version."
        ::= { info 3 }

-- status mib
systemStatus OBJECT-TYPE
        SYNTAX		INTEGER {
				na (0),
                            	ok (1),
			    	warning (2),
                            	alarm (3)
                        	}
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Unit status."
        ::= { status 1 }

lineStatus OBJECT-TYPE
        SYNTAX          INTEGER {
				na (0),
			    	ok (1),
			    	analyzer (2),
			    	connecting (3),
                            	searching (4)
                        	}
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Radio link status. Supported by RAy10 only."
        ::= { status 2 }

peerNumber OBJECT-TYPE
        SYNTAX          Gauge32
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Peer station serial number."
        ::= { status 3 }

rfPowerStatus OBJECT-TYPE
	SYNTAX		INTEGER {
				na (0),
				ok (1),
				fail (2)
				}
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"RF Power amplifier OK/Failure."
	::= { status 4 }

searchModeDisabled OBJECT-TYPE
	SYNTAX		OptionSetting
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Search mode disabled on/off. Supported by RAy10 only."
	::= { status 5 }

ethPeer	OBJECT-TYPE
	SYNTAX		ServiceState
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Peer station user Ethernet link status. Not supported by RAy2."
	::= { status 6 }

securePeerMode OBJECT-TYPE
	SYNTAX		OptionSetting
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Secure peer mode. Not supported by RAy10."
	::= { status 7 }

lineStatusII OBJECT-TYPE
        SYNTAX          INTEGER {
				na (0),
				setup (1),
				single (2),
				connecting (3),
				authorizing (4),
				ok (5),
				analyzer (6)
                        	}
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Radio link status. Not supported by RAy10."
        ::= { status 8 }

eth1Link OBJECT-TYPE
	SYNTAX		ServiceState
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Ethernet 1 link status. Supported by RAy2 only."
	::= { status 9 }

eth2Link OBJECT-TYPE
	SYNTAX		ServiceState
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Ethernet 2 link status. Supported by RAy2 only."
	::= { status 10 }


-- chassis mib
temperatureModem OBJECT-TYPE
        SYNTAX         	Integer32
        MAX-ACCESS	read-only
        STATUS         	current
        DESCRIPTION    	"Modem temperature in hundredths of Celsius (C)."
        ::= { chassis 1 }

temperatureRadio OBJECT-TYPE
        SYNTAX          Integer32
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Radio temperature in hundredths of Celsius (C)."
        ::= { chassis 2}

voltageUnit OBJECT-TYPE
        SYNTAX          Integer32
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Power supply voltage in tenths of Volts (V)."
        ::= { chassis 3 }

voltageSource OBJECT-TYPE
	SYNTAX		INTEGER {
				na (0),
				aux (1),
				poe (2)
				}
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Source of supply voltage. Supported by RAy2 only."
	::= { chassis 4 }


-- system mib
useCpu OBJECT-TYPE
        SYNTAX          INTEGER
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "System use CPU in %."
        ::= { system 1 }

useMemory OBJECT-TYPE
        SYNTAX          INTEGER
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "System use memory in %."
        ::= { system 2 }

useLogStorage OBJECT-TYPE
        SYNTAX          INTEGER
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Use storage for log in %."
        ::= { system 3 }

-- access mib
sshd OBJECT-TYPE
        SYNTAX          INTEGER {
				on (1),
				onlykey (2),
				off (3)
				}
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Management interface: SSH."
        ::= { access 1 }

telnetd OBJECT-TYPE
        SYNTAX          OptionSetting
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Management interface: Telnet."
        ::= { access 2 }

httpd OBJECT-TYPE
        SYNTAX		OptionSetting
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Management interface: HTTP."
        ::= { access 3 }

ip OBJECT-TYPE
	SYNTAX		IpAddress
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Management interface: IP address."
	::= { access 4 }

mac OBJECT-TYPE
	SYNTAX		PhysAddress
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Management interface: MAC address."
	::= { access 5 }

managementVlan OBJECT-TYPE
	SYNTAX		OptionSetting
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Management interface: VLAN on/off."
	::= { access 6 }

managementVlanId OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Management interface: VLAN ID."
	::= { access 7 }

wifiHAP OBJECT-TYPE
        SYNTAX          OptionSetting
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Management interface: WiFi Host Access Point."
        ::= { access 8 }


-- authorization mib
keyTable OBJECT-TYPE
	SYNTAX 		SEQUENCE OF KeyEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"List of product key entries. Supported by RAy10 only."
	::= { authorization 1 }
	
keyEntry OBJECT-TYPE
	SYNTAX		KeyEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"Product key entry. Supported by RAy10 only."
	INDEX		{ keyName }
	::= { keyTable 1 }

KeyEntry ::=
	SEQUENCE {
		keyName	DisplayString
		}

keyName OBJECT-TYPE
	SYNTAX		DisplayString(SIZE(1..64))
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Product key name. Supported by RAy10 only."
	::= { keyEntry 1 }

-- alarm mib
alarmTemperature OBJECT-TYPE
	SYNTAX		AlarmState
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Temperature alarm state. Supported by RAy2 only."
	::= { alarm 1 }

alarmVoltageLow OBJECT-TYPE
	SYNTAX		AlarmState
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Low voltage alarm state. Supported by RAy2 only."
	::= { alarm 2 }

alarmVoltageHigh OBJECT-TYPE
	SYNTAX		AlarmState
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"High voltage alarm state. Supported by RAy2 only."
	::= { alarm 3 }

alarmRss OBJECT-TYPE
	SYNTAX		AlarmState
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"RSS alarm state. Supported by RAy2 only."
	::= { alarm 4 }

alarmSnr OBJECT-TYPE
	SYNTAX		AlarmState
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"SNR alarm state. Supported by RAy2 only."
	::= { alarm 5 }

alarmBer OBJECT-TYPE
	SYNTAX		AlarmState
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"BER alarm state. Supported by RAy2 only."
	::= { alarm 6 }

alarmPeerDisconnected OBJECT-TYPE
	SYNTAX		AlarmState
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Peer disconnect alarm state. Supported by RAy2 only."
	::= { alarm 7 }

alarmEth1Down OBJECT-TYPE
	SYNTAX		AlarmState
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Ethernet 1 Link Down alarm state. Supported by RAy2 only."
	::= { alarm 8 }

alarmEth2Down OBJECT-TYPE
	SYNTAX		AlarmState
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Ethernet 2 Link Down alarm state. Supported by RAy2 only."
	::= { alarm 9 }

alarmRfPowerFail OBJECT-TYPE
	SYNTAX		AlarmState
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"RF Power Fail alarm state. Supported by RAy2 only."
	::= { alarm 10 }

alarmNetBitrate OBJECT-TYPE
	SYNTAX		AlarmState
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Air Speed below Limit alarm state. Supported by RAy2 only."
	::= { alarm 11 }

alarmWifiOn OBJECT-TYPE
	SYNTAX		AlarmState
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"WiFi Host Access Oint on. Supported by RAy2 only."
	::= { alarm 12 }


-- interface mib
ifRadio		OBJECT IDENTIFIER ::= {interface 1}
ifEth		OBJECT IDENTIFIER ::= {interface 2}

-- radio mib
rxChannel OBJECT-TYPE
        SYNTAX          DisplayString (SIZE(0..8))
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Receiver channel ID."
        ::= { ifRadio 1 }

txChannel OBJECT-TYPE
        SYNTAX          DisplayString (SIZE(0..8))
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Transceiver channel ID."
        ::= { ifRadio 2 }

rxFreq OBJECT-TYPE
        SYNTAX          Gauge32
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Receiver frequency in kHz."
        ::= { ifRadio 3 }

txFreq OBJECT-TYPE
        SYNTAX          Gauge32
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Transceiver frequency in kHz."
        ::= { ifRadio 4 }

rxModulation OBJECT-TYPE
        SYNTAX          DisplayString
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Rx modulation text ID."
        ::= { ifRadio 5 }

txModulation OBJECT-TYPE
        SYNTAX          DisplayString
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Tx modulation text ID."
        ::= { ifRadio 6 }

rxModulationIndex OBJECT-TYPE
        SYNTAX          ModulationList
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Rx modulation index."
        ::= { ifRadio 7 }

txModulationIndex OBJECT-TYPE
        SYNTAX          ModulationList
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Tx modulation index."
        ::= { ifRadio 8 }

bandwidth OBJECT-TYPE
        SYNTAX          INTEGER {
				na (0),
                            	bw-28MHz (1),
                            	bw-14MHz (2),
                            	bw-7MHz (3)
                        	}
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Radio channel bandwidth. Supported by RAy10 only."
        ::= { ifRadio 9 }

coding OBJECT-TYPE
        SYNTAX          INTEGER {
				na (0),
                            	low (1),
                            	hi (2)
                        	}
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Channel coding level. Supported by RAy10 only."
        ::= { ifRadio 10 }

matching OBJECT-TYPE
        SYNTAX          OptionSetting
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Channel matching."
        ::= { ifRadio 11 }

rfPowerConfigured OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Configured RF Power in dBm."
	::= { ifRadio 12 }

netBitrate OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Current net bitrate in kbps."
	::= { ifRadio 13 }

maxNetBitrate OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Maximum net bitrate in Mbps."
	::= { ifRadio 14 }

bandwidthKHz OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Radio channel bandwidth in kHz. Not supported by RAy10."
	::= { ifRadio 15 }

channelArrangement OBJECT-TYPE
        SYNTAX          INTEGER {
				na (0),
                            	accp (1),
                            	acap (2),
				ccdp (3)
                        	}
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Channel arrangement. Not supported by RAy10."
	::= { ifRadio 16 }

rfPowerCurrent OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Current RF Power in dBm. Not supported by RAy10."
	::= { ifRadio 17 }

-- ifEth mib

ifEthTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF IfEthEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"List of Ethernet interfaces."
	::= { ifEth 1 }

ifEthEntry OBJECT-TYPE
	SYNTAX		IfEthEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"Ethernet interface entry."
	INDEX		{ speed }
	::= { ifEthTable 1 }

IfEthEntry ::=
	SEQUENCE {
		speed		Integer32,
		duplex		INTEGER,
		mdix		INTEGER,
		autonego	OptionSetting,
		pause		OptionSetting,
		asymPause	OptionSetting
		}
		
speed OBJECT-TYPE
        SYNTAX          Integer32(1..1000000000)
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Ethernet speed."
        ::= { ifEthEntry 1 }
duplex OBJECT-TYPE
        SYNTAX          INTEGER {
				na (0),
                            	full (1),
		            	half (2)
                        	}
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION    	"Ethernet duplex."
        ::= { ifEthEntry 2 }

mdix OBJECT-TYPE
        SYNTAX          INTEGER {
				na (0),
                            	mdi (1),
		            	mdi-x (2)
                        	}
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION    	"Ethernet MDI-X / MDI."
        ::= { ifEthEntry 3 }

autonego OBJECT-TYPE
        SYNTAX          OptionSetting
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Ethernet autonego."
        ::= { ifEthEntry 4 }

pause OBJECT-TYPE
        SYNTAX          OptionSetting
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Ethernet pause."
        ::= { ifEthEntry 5 }

asymPause OBJECT-TYPE
        SYNTAX          OptionSetting
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Ethernet asymmetric pause."
        ::= { ifEthEntry 6 }

prioritized OBJECT-TYPE
        SYNTAX          OptionSetting
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Ethernet prioritized VLAN support. Supported by RAy10 only."
        ::= { ifEth 2 }

vlanId OBJECT-TYPE
        SYNTAX          Integer32
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Ethernet prioritized VLAN ID. Supported by RAy10 only."
        ::= { ifEth 3 }

serviceVlanId OBJECT-TYPE
        SYNTAX          Integer32
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Ethernet service VLAN ID between local and remote station. Not supported by RAy2."
        ::= { ifEth 4 }


-- statistic mib
modemR			OBJECT IDENTIFIER ::= {statistic 1}
radio			OBJECT IDENTIFIER ::= {statistic 2}
ethernet		OBJECT IDENTIFIER ::= {statistic 3}

 -- statistic radiomodem ethernet mib
rxPauseFrames OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Number of received Control frames with a valid PAUSE op-code. Supported by RAy10 only."
        ::= { modemR 1 }

rxControlFrames OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Number of received Control frames. Supported by RAy10 only."
        ::= { modemR 2 }

rxBroadcast OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Number of received packets with a broadcast destination address. Supported by RAy10 only."
        ::= { modemR 3 }

rxMulticast OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Number of received packets with a multicast destination address. Supported by RAy10 only."
        ::= { modemR 4 }

rxDones OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Number of successfully received packets. Supported by RAy10 only."
        ::= { modemR 5 }

rxOutOfRangeErrors OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Number of received frames larger than 1518 bytes (the frame Type/Length field is indicating a value larger than 1518 bytes). Supported by RAy10 only."
        ::= { modemR 6 }

rxCrcErrors OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Number of received frames with the CRC which does not match the internally generated CRC. Supported by RAy10 only."
        ::= { modemR 7 }

rxCodeErrors OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Number of received packets with one or more erroneous nibbles. Supported by RAy10 only."
        ::= { modemR 8 }

rxFalseCarrierErrors OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Rx false carrier errors. Supported by RAy10 only."
        ::= { modemR 9 }

rxDroppedPkts OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Number of dropped packets. Supported by RAy10 only."
        ::= { modemR 10 }

rxHCBytes OBJECT-TYPE
        SYNTAX          Counter64
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Number of received bytes. Supported by RAy10 only."
        ::= { modemR 11 }

txPauseFrames OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Number of transmitted Control frames with a valid PAUSE op-code. Supported by RAy10 only."
        ::= { modemR 12 }

txControlFrames OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Number of transmitted Control frames. Supported by RAy10 only."
        ::= { modemR 13 }

txBroadcast OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Number of transmitted packets with a broadcast destination address. Supported by RAy10 only."
        ::= { modemR 14 }

txMulticast OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Number of transmitted packets with a multicast destination address. Supported by RAy10 only."
        ::= { modemR 15 }

txDones OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Number of successfully transmitted packets. Supported by RAy10 only."
        ::= { modemR 16 }

txLengthCheckErrors OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Number of transmitted packets with the frame Length field (not a Type field) value that does not match the actual data byte length. Supported by RAy10 only."
        ::= { modemR 17 }

txCrcErrors OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Number of transmitted frames with the CRC which does not match the internally generated CRC. Supported by RAy10 only."
        ::= { modemR 18 }

txCollisions OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Tx collisions. Supported by RAy10 only."
        ::= { modemR 19 }

txHCBytes OBJECT-TYPE
        SYNTAX          Counter64
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Number of transmitted bytes. Supported by RAy10 only."
        ::= { modemR 20 }

-- statistic radio mib

rss OBJECT-TYPE
        SYNTAX          Integer32
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Receiving RSS indicator in decimal dBm (-39 -> -3,9)."
        ::= { radio 1 }

snr OBJECT-TYPE
        SYNTAX          Integer32
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Receiving SNR indicator in decimal dB (39 -> 3,9)."
        ::= { radio 2 }

fecBlockCounter OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Total block counter for BER calculation. Block size is 2048 bits. Supported by RAy10 only."
        ::= { radio 3 }
	
fecUncorrectBlockCounter OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Incorrect block counter for BER calculation. Block size is 2048 bits. Supported by RAy10 only."
        ::= { radio 4 }

timeAllConnect OBJECT-TYPE
        SYNTAX          TimeTicks
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Overall link uptime."
        ::= { radio 5 }

timeAllDisconnect OBJECT-TYPE
        SYNTAX          TimeTicks
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Overall link downtime."
        ::= { radio 6 }

timeMaxDisconnect OBJECT-TYPE
        SYNTAX          TimeTicks
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "The longest drop (disconnecting)."
        ::= { radio 7 }
	
numDisconnect OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Number of drops (disconnecting)."
        ::= { radio 8 }

reliability OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Reliability in thousandths of %."
	::= { radio 9 }

linkUptime OBJECT-TYPE
        SYNTAX          TimeTicks
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Current radio link uptime. Not supported by RAy10."
        ::= { radio 10 }

ber OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Bit Error Rate (BER) multiplied by 10^9. Not supported by RAy10."
	::= { radio 11 }

-- statistic Ethernet mib

ethInThroughput OBJECT-TYPE
        SYNTAX          Integer32
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Input Ethernet 1 data port throughput in kbps. Not supported by RAy10."
        ::= { ethernet 1 }

ethOutThroughput OBJECT-TYPE
        SYNTAX          Integer32
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Output Ethernet 1 data port throughput in kbps. Not supported by RAy10."
        ::= { ethernet 2 }

eth2InThroughput OBJECT-TYPE
        SYNTAX          Integer32
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Input Ethernet 2 data port throughput in kbps. Supported by RAy2 only."
        ::= { ethernet 3 }

eth2OutThroughput OBJECT-TYPE
        SYNTAX          Integer32
        MAX-ACCESS	read-only
        STATUS          current
        DESCRIPTION     "Output Ethernet 2 data port throughput in kbps. Supported by RAy2 only."
        ::= { ethernet 4 }


-- definition  traps

airDisconnect NOTIFICATION-TYPE
    OBJECTS { lineStatus }
    STATUS  current
    DESCRIPTION
            "Air line disconnected. Not supported by RAy2."
    ::= { rayTraps 1 }

airConnect NOTIFICATION-TYPE
    OBJECTS { lineStatus }
    STATUS  current
    DESCRIPTION
            "Air line connected after being disconnected. Not supported by RAy2."
    ::= { rayTraps 2 }

airWdog NOTIFICATION-TYPE
    OBJECTS { lineStatus }
    STATUS  current
    DESCRIPTION
            "Air watch dog. Supported by RAy10 only."
    ::= { rayTraps 3 }

tempAlarm NOTIFICATION-TYPE
    OBJECTS { temperatureModem }
    STATUS  current
    DESCRIPTION
            "Temperature exceeded the threshold. Not supported by RAy2."
    ::= { rayTraps 4 }

powerAlarm NOTIFICATION-TYPE
    OBJECTS { voltageUnit }
    STATUS  current
    DESCRIPTION
            "Power voltage is out of the thresholds. Not supported by RAy2."
    ::= { rayTraps 5 }

memoryAlarm NOTIFICATION-TYPE
    OBJECTS { useMemory }
    STATUS  current
    DESCRIPTION
            "Memory use exceeded the threshold. Supported by RAy10 only."
    ::= { rayTraps 6 }

rssAlarm NOTIFICATION-TYPE
    OBJECTS { rss }
    STATUS  current
    DESCRIPTION
            "RSS exceeded the threshold. Not supported by RAy2."
    ::= { rayTraps 7 }

snrAlarm NOTIFICATION-TYPE
    OBJECTS { snr }
    STATUS  current
    DESCRIPTION
            "SNR exceeded the threshold. Not supported by RAy2."
    ::= { rayTraps 8 }

berAlarm NOTIFICATION-TYPE
    OBJECTS { fecUncorrectBlockCounter, fecBlockCounter }
    STATUS  current
    DESCRIPTION
            "BER exceeded the threshold. Not supported by RAy2."
    ::= { rayTraps 9 }

rfPowerFail NOTIFICATION-TYPE
    OBJECTS { rfPowerStatus }
    STATUS  current
    DESCRIPTION
            "RF Power amplifier failure. Not supported."
    ::= { rayTraps 10 }

peerEthLinkDown NOTIFICATION-TYPE
    OBJECTS { ethPeer }
    STATUS  current
    DESCRIPTION
            "Peer station Ethernet link Up/Down. Not supported by RAy2."
    ::= { rayTraps 11 }


-- RAy2 trap definitions
    	
tr2TemperatureAlarm NOTIFICATION-TYPE
    OBJECTS { 	temperatureModem,
    		alarmTemperature }
    STATUS  current
    DESCRIPTION
            "Temperature exceeded the threshold. Supported by RAy2 only."
    ::= { ray2Traps 1 }

tr2VoltageLowAlarm NOTIFICATION-TYPE
    OBJECTS { 	voltageUnit,
    		alarmVoltageLow }
    STATUS  current
    DESCRIPTION
            "Supply voltage below minimal threshold. Supported by RAy2 only."
    ::= { ray2Traps 2 }

tr2VoltageHighAlarm NOTIFICATION-TYPE
    OBJECTS { 	voltageUnit,
    		alarmVoltageHigh }
    STATUS  current
    DESCRIPTION
            "Supply voltage above maximal threshold. Supported by RAy2 only."
    ::= { ray2Traps 3 }

tr2RssAlarm NOTIFICATION-TYPE
    OBJECTS { 	rss,
    		alarmRss }
    STATUS  current
    DESCRIPTION
            "RSS exceeded the threshold. Supported by RAy2 only."
    ::= { ray2Traps 4 }

tr2SnrAlarm NOTIFICATION-TYPE
    OBJECTS { 	snr,
    		alarmSnr }
    STATUS  current
    DESCRIPTION
            "SNR exceeded the threshold. Supported by RAy2 only."
    ::= { ray2Traps 5 }

tr2BerAlarm NOTIFICATION-TYPE
    OBJECTS { 	ber,
		alarmBer }
    STATUS  current
    DESCRIPTION
            "BER exceeded the threshold. Supported by RAy2 only."
    ::= { ray2Traps 6 }

tr2AirDisconnect NOTIFICATION-TYPE
    OBJECTS { 	lineStatusII,
    		alarmPeerDisconnected }
    STATUS  current
    DESCRIPTION
            "Air line disconnected. Supported by RAy2 only."
    ::= { ray2Traps 7 }

tr2AirConnect NOTIFICATION-TYPE
    OBJECTS { 	lineStatusII,
    		alarmPeerDisconnected }
    STATUS  current
    DESCRIPTION
            "Air line connected after being disconnected. Supported by RAy2 (up to fw 2.1.7.0) only."
    ::= { ray2Traps 8 }

tr2Eth1LinkDown NOTIFICATION-TYPE
    OBJECTS { 	eth1Link,
    		alarmEth1Down }
    STATUS  current
    DESCRIPTION
            "Local station Ethernet 1 link Up/Down. Supported by RAy2 only."
    ::= { ray2Traps 9 }

tr2Eth21LinkDown NOTIFICATION-TYPE
    OBJECTS { 	eth2Link,
    		alarmEth2Down }
    STATUS  current
    DESCRIPTION
            "Local station Ethernet 2 link Up/Down. Supported by RAy2 only."
    ::= { ray2Traps 10 }

tr2RfPowerFail NOTIFICATION-TYPE
    OBJECTS { 	rfPowerStatus,
    		alarmRfPowerFail }
    STATUS  current
    DESCRIPTION
            "RF Power amplifier failure. Supported by RAy2 only."
    ::= { ray2Traps 11 }

tr2NetBitrate NOTIFICATION-TYPE
    OBJECTS { 	netBitrate,
    		alarmNetBitrate }
    STATUS  current
    DESCRIPTION
            "Air speed below threshold. Supported by RAy2 only."
    ::= { ray2Traps 12 }

tr2WifiOn NOTIFICATION-TYPE
    OBJECTS { 	wifiHAP,
    		alarmWifiOn }
    STATUS  current
    DESCRIPTION
            "WiFi Host Access Point is on. Supported by RAy2 only."
    ::= { ray2Traps 13 }

END