-- ===========================================================================
-- Riedo Networks (RNX) UPDU MIB
-- ===========================================================================

RNX-UPDU-MIB DEFINITIONS ::= BEGIN

IMPORTS
	MODULE-IDENTITY,
	OBJECT-TYPE,
	Counter64,
	Integer32,
	enterprises
		FROM SNMPv2-SMI
	TEXTUAL-CONVENTION
		FROM SNMPv2-TC
	MODULE-COMPLIANCE,
	OBJECT-GROUP
		FROM SNMPv2-CONF;

rnx	MODULE-IDENTITY
	LAST-UPDATED	"202209090000Z"
	ORGANIZATION	"Riedo Networks Ltd."
	CONTACT-INFO	"Riedo Networks Ltd."
	DESCRIPTION	"UPDU MIB"

	REVISION	"202209090000Z"
		DESCRIPTION	"Add upduMeterDataQuality."
	REVISION	"202207060000Z"
		DESCRIPTION	"Add upduMeterDescription."
	REVISION	"202206220000Z"
		DESCRIPTION	"Add upduMeterSystemName, upduMeterCustomName."
	REVISION	"202012160000Z"
		DESCRIPTION	"Add upduSensorTable."
	REVISION	"202006180000Z"
		DESCRIPTION	"Initial version."
	::= { enterprises 55108 }

upduMib OBJECT IDENTIFIER
	::= { rnx 1 }

-- ===========================================================================
-- Textual conventions
-- ===========================================================================

Watts ::= TEXTUAL-CONVENTION
	DISPLAY-HINT	"d"
	STATUS		current
	DESCRIPTION
		"Watts"
	SYNTAX		Integer32

VoltAmpereReactives ::= TEXTUAL-CONVENTION
	DISPLAY-HINT	"d"
	STATUS		current
	DESCRIPTION
		"Volt-ampere reactives"
	SYNTAX		Integer32

VoltAmperes ::= TEXTUAL-CONVENTION
	DISPLAY-HINT	"d"
	STATUS		current
	DESCRIPTION
		"Volt-amperes"
	SYNTAX		Integer32

WattHours ::= TEXTUAL-CONVENTION
	DISPLAY-HINT	"d"
	STATUS		current
	DESCRIPTION
		"Watt hours"
	SYNTAX		Counter64

VoltAmpereReactiveHours ::= TEXTUAL-CONVENTION
	DISPLAY-HINT	"d"
	STATUS		current
	DESCRIPTION
		"Volt-ampere reactive hours"
	SYNTAX		Counter64

MilliAmperes ::= TEXTUAL-CONVENTION
	DISPLAY-HINT	"d"
	STATUS		current
	DESCRIPTION
		"Milli-amperes"
	SYNTAX		Integer32

TenthMilliAmperes ::= TEXTUAL-CONVENTION
	DISPLAY-HINT	"d"
	STATUS		current
	DESCRIPTION
		"Tenth of Milli-amperes"
	SYNTAX		Integer32

MilliVolts ::= TEXTUAL-CONVENTION
	DISPLAY-HINT	"d"
	STATUS		current
	DESCRIPTION
		"Milli-volts"
	SYNTAX		Integer32

TenthDegreesCelsius ::= TEXTUAL-CONVENTION
	DISPLAY-HINT	"d"
	STATUS		current
	DESCRIPTION
		"Deci-degrees celsius"
	SYNTAX		Integer32

Permil ::= TEXTUAL-CONVENTION
	DISPLAY-HINT	"d"
	STATUS		current
	DESCRIPTION
		"Per mil"
	SYNTAX		Integer32

-- ===========================================================================
-- Subtrees
-- ===========================================================================

upduInfo OBJECT IDENTIFIER
	::= { upduMib 1 }

upduInventory OBJECT IDENTIFIER
	::= { upduMib 2 }

upduMeasurements OBJECT IDENTIFIER
	::= { upduMib 3 }

upduControl OBJECT IDENTIFIER
	::= { upduMib 4 }

upduConformance OBJECT IDENTIFIER
	::= { upduMib 5 }

-- ===========================================================================
-- Info: UPDU information
-- ===========================================================================

upduInfoPartNumber OBJECT-TYPE
	SYNTAX		OCTET STRING
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Part number"
	::= { upduInfo 1 }

upduInfoSerialNumber OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Serial number"
	::= { upduInfo 2 }

upduInfoLotNumber OBJECT-TYPE
	SYNTAX		OCTET STRING
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Lot number"
	::= { upduInfo 3 }

-- ===========================================================================
-- Inventory: Per module information
-- ===========================================================================

upduModuleTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF UpduModuleEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"A list of module entries."
	::= { upduInventory 1 }

upduModuleEntry OBJECT-TYPE
	SYNTAX		UpduModuleEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"An entry containing information for a particular module."
	INDEX		{ upduModuleIndex }
	::= { upduModuleTable 1 }

UpduModuleEntry ::= SEQUENCE {
		upduModuleIndex		Integer32,
		upduModuleType		INTEGER,
		upduModulePartNumber	OCTET STRING,
		upduModuleSerialNumber	Integer32,
		upduModuleLotNumber	OCTET STRING
	}

upduModuleIndex OBJECT-TYPE
	SYNTAX		Integer32 (0..8)
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Module index."
	::= { upduModuleEntry 1 }

upduModuleType OBJECT-TYPE
	SYNTAX		INTEGER {
			unknown (0),
			icm (1),
			meterModule (2)
	}
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Module type: tells what type of module it is."
	::= { upduModuleEntry 2 }

upduModulePartNumber OBJECT-TYPE
	SYNTAX		OCTET STRING
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Part number"
	::= { upduModuleEntry 3 }

upduModuleSerialNumber OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Module serial number."
	::= { upduModuleEntry 4 }

upduModuleLotNumber OBJECT-TYPE
	SYNTAX		OCTET STRING
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Module lot number."
	::= { upduModuleEntry 5 }

-- ===========================================================================
-- Measurements: Per meter data
-- ===========================================================================

upduMeterTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF UpduMeterEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Holds information about each Power module."
	::= { upduMeasurements 1 }

upduMeterEntry OBJECT-TYPE
	SYNTAX		UpduMeterEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"An entry provides a power data"
	INDEX {
		upduModuleIndex,
		upduMeterIndex
	}
	::= { upduMeterTable 1 }

UpduMeterEntry ::= SEQUENCE {
		upduMeterIndex		Integer32,
		upduMeterName		OCTET STRING,
		upduMeterType		INTEGER,
		upduMeterEnergyP	WattHours,
		upduMeterEnergyR1	VoltAmpereReactiveHours,
		upduMeterEnergyR4	VoltAmpereReactiveHours,
		upduMeterPowerP		Watts,
		upduMeterPowerQ		VoltAmpereReactives,
		upduMeterPowerS		VoltAmperes,
		upduMeterUrms		MilliVolts,
		upduMeterIrms		MilliAmperes,
		upduMeterSystemName     OCTET STRING,
		upduMeterCustomName     OCTET STRING,
	        upduMeterDescription    OCTET STRING,
		upduMeterDataQuality    INTEGER
	}

upduMeterIndex OBJECT-TYPE
	SYNTAX		Integer32 (0..11)
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Number of the meter on the Module."
	::= { upduMeterEntry 1 }

upduMeterName OBJECT-TYPE
	SYNTAX		OCTET STRING (SIZE(0..15))
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Meter name."
	::= { upduMeterEntry 2 }

upduMeterType OBJECT-TYPE
	SYNTAX		INTEGER {
			pduTotal (0),
			pduTotalCalc (1),
			phaseTotal (2),
			phaseTotalCalc (3),
			moduleTotal (4),
			moduleTotalCalc (5),
			outlet (6),
			outletGroup (7)
	}
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Meter type: Tell if the meter is per-phase, per PDU,
		per module or for a single outlet or outlet group. For
		pduTotalCalc, phaseTotalCalc, moduleTotalCalc, the
		total is calculated (sum of the measurements of the
		underlying objects). For the other totals, it is
		measured."
	::= { upduMeterEntry 3 }

upduMeterEnergyP OBJECT-TYPE
	SYNTAX		WattHours
	UNITS		"Wh"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Positive active energy in watt hours."
	::= { upduMeterEntry 4 }

upduMeterEnergyR1 OBJECT-TYPE
	SYNTAX		VoltAmpereReactiveHours
	UNITS		"varh"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Reactive energy from quadrant R1 in volt-ampere reactives hours."
	::= { upduMeterEntry 5 }

upduMeterEnergyR4 OBJECT-TYPE
	SYNTAX		VoltAmpereReactiveHours
	UNITS		"varh"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Reactive energy from quadrant R4 in volt-ampere reactives hours."
	::= { upduMeterEntry 6 }

upduMeterPowerP OBJECT-TYPE
	SYNTAX		Watts
	UNITS		"W"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Active power at a given instant."
	::= { upduMeterEntry 7 }

upduMeterPowerQ OBJECT-TYPE
	SYNTAX		VoltAmpereReactives
	UNITS		"var"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Reactive power at a given instant."
	::= { upduMeterEntry 8 }

upduMeterPowerS OBJECT-TYPE
	SYNTAX		VoltAmperes
	UNITS		"VA"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Apparent power at a given instant."
	::= { upduMeterEntry 9 }

upduMeterUrms OBJECT-TYPE
	SYNTAX		MilliVolts
	UNITS		"mV"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"RMS voltage at a given instant."
	::= { upduMeterEntry 10 }

upduMeterIrms OBJECT-TYPE
	SYNTAX		MilliAmperes
	UNITS		"mA"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"RMS current at a given instant."
	::= { upduMeterEntry 11 }

upduMeterSystemName OBJECT-TYPE
	SYNTAX		OCTET STRING
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"System-defined object name."
	::= { upduMeterEntry 12 }

upduMeterCustomName OBJECT-TYPE
	SYNTAX		OCTET STRING (SIZE(0..23))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION
		"User-configured unique object name. Write access has to be
		explicitly enabled in the UPDU configuration (see SNMP
		options)."
	::= { upduMeterEntry 13 }

upduMeterDescription OBJECT-TYPE
	SYNTAX		OCTET STRING (SIZE(0..127))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION
		"User-configured description. Write access has to be
		explicitly enabled in the UPDU configuration (see SNMP
		options)."
	::= { upduMeterEntry 14 }

upduMeterDataQuality OBJECT-TYPE
	SYNTAX		INTEGER {
			ok (0),
			expired (1),
			noData (2)
	}
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Describes the measurement data quality: ok if all is
		well and measurements are up to date, expired when
		measurements are not updated and represent the last
		known measurement, noData when no measurements of that
		meter are available (e.g. because of a missing license).
		When noData, 0 is returned for all measurement values."
	::= { upduMeterEntry 15 }

-- ===========================================================================
-- Measurements: Per sensor data
-- ===========================================================================

upduSensorTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF UpduSensorEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Holds information about sensors connected to the PDU."
	::= { upduMeasurements 2 }

upduSensorEntry OBJECT-TYPE
	SYNTAX		UpduSensorEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Holds the information related to one specific sensor."
	INDEX	{ upduSensorPort }
	::= { upduSensorTable 1 }

UpduSensorEntry ::= SEQUENCE {
		upduSensorPort					Integer32,
		upduSensorPortName				OCTET STRING,
		upduSensorType					INTEGER,
		upduSensorTemperatureCelsius	TenthDegreesCelsius,
		upduSensorHumidity				Permil
	}

upduSensorPort OBJECT-TYPE
	SYNTAX		Integer32 (1..3)
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Sensor port number."
	::= { upduSensorEntry 1 }

upduSensorPortName OBJECT-TYPE
	SYNTAX		OCTET STRING
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Sensor port name as printed on the front plate."
	::= { upduSensorEntry 2 }

upduSensorType OBJECT-TYPE
	SYNTAX		INTEGER {
		none (0),
		temp (1),
		tempHumidity (2)
	}
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Sensor type."
	::= { upduSensorEntry 3 }

upduSensorTemperatureCelsius OBJECT-TYPE
	SYNTAX		TenthDegreesCelsius
	UNITS		"deg-C/10"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Temperature in tenth degrees."
	::= { upduSensorEntry 4 }

upduSensorHumidity OBJECT-TYPE
	SYNTAX		Permil
	UNITS		"/1000"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Relative humidity in per mil. Set to 0 for temperature only sensor."
	::= { upduSensorEntry 5 }


-- ===========================================================================
-- Measurements: Per RCM data
-- ===========================================================================

upduRcmTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF UpduRcmEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Holds information about embedded residual current monitors."
	::= { upduMeasurements 3 }

upduRcmEntry OBJECT-TYPE
	SYNTAX		UpduRcmEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"An entry provides Residual current data"
	INDEX {
		upduModuleIndex,
		upduRcmIndex
	}
	::= { upduRcmTable 1 }

UpduRcmEntry ::= SEQUENCE {
		upduRcmIndex			Integer32,
		upduRcmName				OCTET STRING,
		upduRcmCurrentRms		TenthMilliAmperes,
		upduRcmCurrentDc		TenthMilliAmperes,
		upduRcmSensorQuality	INTEGER
	}

upduRcmIndex OBJECT-TYPE
	SYNTAX		Integer32 (0..11)
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"RCM index."
	::= { upduRcmEntry 1 }

upduRcmName OBJECT-TYPE
	SYNTAX		OCTET STRING (SIZE(0..15))
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"RCM name."
	::= { upduRcmEntry 2 }

upduRcmCurrentRms OBJECT-TYPE
	SYNTAX		TenthMilliAmperes
	UNITS		"mA/10"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"RMS residual current."
	::= { upduRcmEntry 3 }

upduRcmCurrentDc OBJECT-TYPE
	SYNTAX		TenthMilliAmperes
	UNITS		"mA/10"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"DC residual current."
	::= { upduRcmEntry 4 }

upduRcmSensorQuality OBJECT-TYPE
	SYNTAX		INTEGER {
		ok (0),
		nodata (1),
		timeout (2),
		internalerror (3),
		selftestfailed (4)
	}
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"RCM sensor health"
	::= { upduRcmEntry 5 }

-- ===========================================================================
-- Control: Relay status
-- ===========================================================================

upduRelayTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF UpduRelayEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Holds Relay state."
	::= { upduControl 1 }

upduRelayEntry OBJECT-TYPE
	SYNTAX		UpduRelayEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"An entry provides the status for a relay."
	INDEX {
		upduModuleIndex,
		upduRelayIndex
	}
	::= { upduRelayTable 1 }

UpduRelayEntry ::= SEQUENCE {
		upduRelayIndex		Integer32,
		upduRelayMeterNames	OCTET STRING,
		upduRelayAdminStatus	INTEGER,
		upduRelayOperStatus	INTEGER,
		upduRelayCondition	INTEGER
	}

upduRelayIndex OBJECT-TYPE
	SYNTAX		Integer32 (1..12)
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Relay index."
	::= { upduRelayEntry 1 }

upduRelayMeterNames OBJECT-TYPE
	SYNTAX		OCTET STRING (SIZE(0..255))
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Comma-separated list of meter names this relay controls."
	::= { upduRelayEntry 2 }

upduRelayAdminStatus OBJECT-TYPE
	SYNTAX		INTEGER {
			off (0),
			on (1),
			unknown(2)
	}
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION
		"Defines the desired state of the relay."
	::= { upduRelayEntry 3 }

upduRelayOperStatus OBJECT-TYPE
	SYNTAX		INTEGER {
			off (0),
			on (1),
			unknown(2)
	}
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Defines the operational state of the relay."
	::= { upduRelayEntry 4 }

upduRelayCondition OBJECT-TYPE
	SYNTAX		INTEGER {
			ok (0),
			failed (1),
			unknown(2)
	}
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Gives the relay condition. Ok if the desired state
		corresponds to the operational state, failed if it
		differs and unknown if the operational state is not
		known."
	::= { upduRelayEntry 5 }

-- ===========================================================================
-- Compliance groups
-- ===========================================================================

upduMibCompliances OBJECT IDENTIFIER ::= { upduConformance 1 }

upduMibGroups OBJECT IDENTIFIER ::= { upduConformance 2 }

upduMibCompliance MODULE-COMPLIANCE
	STATUS		current
	DESCRIPTION
		"The compliance statement for SNMP entities which
		implement the RNX-UPDU-MIB."
	MODULE
	MANDATORY-GROUPS {
		upduMibGroupRev1
	}
	::= { upduMibCompliances 1 }

upduMibGroupRev1 OBJECT-GROUP
	OBJECTS {
		upduInfoPartNumber,
		upduInfoSerialNumber,
		upduInfoLotNumber,
		upduModuleType,
		upduModulePartNumber,
		upduModuleSerialNumber,
		upduModuleLotNumber,
		upduMeterName,
		upduMeterType,
		upduMeterEnergyP,
		upduMeterEnergyR1,
		upduMeterEnergyR4,
		upduMeterPowerP,
		upduMeterPowerQ,
		upduMeterPowerS,
		upduMeterUrms,
		upduMeterIrms,
		upduMeterSystemName,
		upduMeterCustomName,
		upduMeterDescription,
		upduMeterDataQuality,
		upduRelayMeterNames,
		upduRelayAdminStatus,
		upduRelayOperStatus,
		upduRelayCondition,
		upduSensorPortName,
		upduSensorType,
		upduSensorTemperatureCelsius,
		upduSensorHumidity,
		upduRcmName,
		upduRcmCurrentRms,
		upduRcmCurrentDc,
		upduRcmSensorQuality
	}
	STATUS		current
	DESCRIPTION
		"rev 1"
	::= { upduMibGroups 1 }

END