-- ******************************************************************** -- RITTAL GmbH & Co. KG, Herborn -- CMC-III-MIB Version 1.7 -- CMC-III-Processing Unit - 7030.000, 7030.010, 7030.020 -- PDU Metered/Managed/Switched - 7955.xxx -- IoT Interface - 3124.300 -- -- Management Information Base for SNMP Network Management -- -- Copyright 2018 Rittal Herborn. -- All Rights Reserved. -- -- The information in this document is subject to change without notice. -- Refer to document "AGB_Software_Rittal.pdf" -- -- ******************************************************************** -- File : $RCSfile: RITTAL-CMC-III-MIB.txt,v $ -- Rev. : $Revision: 1.7 $ -- Date : $Date: 2018/03/05 $ -- Author : $Author: fis $ -- Id : $Id: RITTAL-CMC-III-MIB.txt,v 1.6 2015/10/09 17:29:40 fis Exp $ -- ******************************************************************** RITTAL-CMC-III-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, Integer32, Unsigned32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF DisplayString FROM SNMPv2-TC sysObjectID FROM SNMPv2-MIB rittal FROM RITTAL-SMI-MIB; cmcIII MODULE-IDENTITY LAST-UPDATED "201803050000Z" ORGANIZATION "RITTAL GmbH & Co. KG" CONTACT-INFO "www.rittal.de RITTAL GmbH & Co. KG Forschung & Entwicklung Auf dem Stuetzelberg D-35745 Herborn Germany, Europe +49(0)2772 5050 info@rittal.de." DESCRIPTION "The MIB module for representing cmcIII SNMP agent." REVISION "201803050000Z" DESCRIPTION "enums added to cmcIIIVarType, enums added to cmcIIIUnitType." REVISION "201708040000Z" DESCRIPTION "cmcIIIModbusAccess, changed enums to 'readonly' and 'readwrite'. 'noaccess' and 'writeonly' no longer supported." REVISION "201602020000Z" DESCRIPTION "added new enums, fixed wrong descriptions." REVISION "201510270000Z" DESCRIPTION "added cmcIIIFiles, cmcIIIVarByTypeTable, cmcIIIVarIntDynTable, cmcIIIUnitLoadTable, cmcIIIUnitMode, cmcIIICapabilityRev, and all members of cmcIIIRadiusMibGroup, cmcIIIWebCamMibGroup." REVISION "201501230000Z" DESCRIPTION "added new enums." REVISION "201407100000Z" DESCRIPTION "matching of SIZEs." REVISION "201311100000Z" DESCRIPTION "added cmcIIIDevAssembly." REVISION "201305010000Z" DESCRIPTION "extended cmcIIILdapMibGroup, added cmcIIIShutdownMibGroup, cmcIIIModbusMibGroup, cmcIIIDrcMibGroup, added OPC UA support." REVISION "201208300000Z" DESCRIPTION "modified object-grouping." REVISION "201109020000Z" DESCRIPTION "SMIv2 Version of cmcIII MIB." REVISION "201104110000Z" DESCRIPTION "Initial Version of cmcIII MIB." -- ::= { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) rittal(2606) 7 } ::= { rittal 7 } -- ***************************************************************************** -- rittal OBJECT IDENTIFIER ::= { enterprises 2606 } -- cmcIII OBJECT IDENTIFIER ::= { rittal 7 } cmcIIINotifications OBJECT IDENTIFIER ::= { cmcIII 0 } cmcIIIMibRev OBJECT IDENTIFIER ::= { cmcIII 1 } cmcIIIUnit OBJECT IDENTIFIER ::= { cmcIII 2 } cmcIIISetup OBJECT IDENTIFIER ::= { cmcIII 3 } cmcIIISetupGeneral OBJECT IDENTIFIER ::= { cmcIIISetup 2 } cmcIIISetupTimer OBJECT IDENTIFIER ::= { cmcIIISetup 3 } cmcIIISetupTrap OBJECT IDENTIFIER ::= { cmcIIISetup 4 } cmcIIISetupSMTP OBJECT IDENTIFIER ::= { cmcIIISetup 5 } cmcIIISetupSMS OBJECT IDENTIFIER ::= { cmcIIISetup 6 } cmcIIISetupSysLog OBJECT IDENTIFIER ::= { cmcIIISetup 7 } cmcIIISetupNTP OBJECT IDENTIFIER ::= { cmcIIISetup 8 } cmcIIISetupLDAP OBJECT IDENTIFIER ::= { cmcIIISetup 9 } cmcIIISetupShutdown OBJECT IDENTIFIER ::= { cmcIIISetup 10 } cmcIIISetupModbus OBJECT IDENTIFIER ::= { cmcIIISetup 11 } cmcIIISetupRadius OBJECT IDENTIFIER ::= { cmcIIISetup 12 } cmcIIISetupWebCam OBJECT IDENTIFIER ::= { cmcIIISetup 13 } cmcIIIDevice OBJECT IDENTIFIER ::= { cmcIII 4 } cmcIIIDevs OBJECT IDENTIFIER ::= { cmcIIIDevice 1 } cmcIIIDevInfo OBJECT IDENTIFIER ::= { cmcIIIDevs 1 } cmcIIIVars OBJECT IDENTIFIER ::= { cmcIIIDevice 2 } cmcIIIVarInfo OBJECT IDENTIFIER ::= { cmcIIIVars 1 } cmcIIIMsgs OBJECT IDENTIFIER ::= { cmcIIIDevice 3 } cmcIIIMsgInfo OBJECT IDENTIFIER ::= { cmcIIIMsgs 1 } cmcIIIDrcs OBJECT IDENTIFIER ::= { cmcIIIDevice 4 } cmcIIIDrcInfo OBJECT IDENTIFIER ::= { cmcIIIDrcs 1 } cmcIIIFiles OBJECT IDENTIFIER ::= { cmcIIIDevice 5 } cmcIIIFileInfo OBJECT IDENTIFIER ::= { cmcIIIFiles 1 } cmcIIIControl OBJECT IDENTIFIER ::= { cmcIII 5 } -- cmcIIIExtAlarm OBJECT IDENTIFIER ::= { cmcIIIControl 4 } cmcIIIConformance OBJECT IDENTIFIER ::= { cmcIII 6 } cmcIIIMibCompliances OBJECT IDENTIFIER ::= { cmcIIIConformance 1 } cmcIIIMibGroups OBJECT IDENTIFIER ::= { cmcIIIConformance 2 } -- cmcIIIProducts OBJECT IDENTIFIER ::= { cmcIII 7 } -- cmcIIICapability OBJECT IDENTIFIER ::= { cmcIII 8 } -- cmcIIITraps OBJECT IDENTIFIER ::= { cmcIII 9 } -- ***************************************************************************** -- CMC-III ComputerMultiControl DK7030.yyy -- -- ***************************************************************************** -- cmcIIIMibRev: -- cmcIIIMibMajRev OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The Major Revision level. A change in the major revision level represents a major change in the architecture of the MIB. A change in the major revision level may indicate a significant change in the information, correct interpretation of data may require a MIB document with the same major revision level." ::= { cmcIIIMibRev 1 } cmcIIIMibMinRev OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The Minor Revision level. A change in the minor revision level may represent some minor additional support, no changes to any pre-existing information has occurred." ::= { cmcIIIMibRev 2 } cmcIIIAgentRev OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The SNMP Agent Revision level." ::= { cmcIIIMibRev 3 } cmcIIICapabilityRev OBJECT-TYPE SYNTAX Unsigned32 (30000..39999) -- = 3 (cmcIII) * 10000 -- + x (0 as default or cmcIIIUnitType * 1000 for specific hardware) -- + cmcIIIMibMajRev -- + cmcIIIMibMinRev MAX-ACCESS read-only STATUS current DESCRIPTION "This agents capabilities as used in RITTAL-CMC-III-CAPABILITY-MIB." ::= { cmcIIIMibRev 4 } -- ============================================================================= -- cmcIIIUnit: -- cmcIIIUnitStatus OBJECT-TYPE SYNTAX INTEGER { ok (1), failed (2), overload (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "General Status of CMCIII PU unit itself (1) OK (2) failed (3) overload (current too high)." ::= { cmcIIIUnit 1 } cmcIIIUnitURL OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) MAX-ACCESS read-only STATUS current DESCRIPTION "URL of CMCIII PU." ::= { cmcIIIUnit 2 } cmcIIIUnitHWRev OBJECT-TYPE SYNTAX DisplayString (SIZE (0..24)) MAX-ACCESS read-only STATUS current DESCRIPTION "Hardware Revision of CMCIII PU." ::= { cmcIIIUnit 3 } cmcIIIUnitFWRev OBJECT-TYPE SYNTAX DisplayString (SIZE (0..24)) MAX-ACCESS read-only STATUS current DESCRIPTION "Firmware Revision of CMCIII PU." ::= { cmcIIIUnit 4 } cmcIIIUnitOSRev OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "Linux Revision of CMCIII PU." ::= { cmcIIIUnit 5 } cmcIIIUnitSerial OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) MAX-ACCESS read-only STATUS current DESCRIPTION "Serial Number of CMCIII PU." ::= { cmcIIIUnit 6 } cmcIIIUnitProd OBJECT-TYPE SYNTAX DisplayString (SIZE (0..24)) MAX-ACCESS read-only STATUS current DESCRIPTION "Production Code of CMCIII PU." ::= { cmcIIIUnit 7 } cmcIIIUnitType OBJECT-TYPE SYNTAX INTEGER { unknown (1), pu (2), compact (3), lcp (4), pdu (5), rms (6), mcs (7), iot (8) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of CMCIII (1) Unit unknown (2) Processing Unit (3) Processing Unit Compact (4) LCP (5) PDU (6) RiMatrix S." ::= { cmcIIIUnit 8 } cmcIIIUnitCurrentSource OBJECT-TYPE SYNTAX INTEGER { unknown (1), acAdapter (2), terminalStrip (3), poe (4), usb (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current source of CMCIII PU (1) unknown (2) AC Adapter Power Supply (3) Terminal Strip (4) poe: Power Over Ethernet (5) usb: Universal Serial Bus." ::= { cmcIIIUnit 9 } cmcIIICan0CurrentConsumption OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximal current consumption required by CANopen fieldbus 1." ::= { cmcIIIUnit 10 } cmcIIICan1CurrentConsumption OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximal current consumption required by CANopen fieldbus 2." ::= { cmcIIIUnit 11 } cmcIIIUnitUpTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Operating time of CMCIII PU in seconds since an epoch." ::= { cmcIIIUnit 12 } cmcIIIUnitMode OBJECT-TYPE SYNTAX INTEGER { localInit (1), start (2), pwrDelay (3), restartBus (4), localOnline (5), collectSlaves (6), reorganizeBus (7), online (8), prepareUpgrade (9), upgradeSensor (10), terminate (11) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current status mode of CMCIII PU and all subsystems (1) local init ini progress (2) start local system first time (3) first start delay (4) restart bus system, reread configuration (5) locally online (6) collect all slaves at the bus (7) reorganize bus (8) up and running (9) prepare for sensor upgrade (10) upgrade sensors (11) gentle termination." ::= { cmcIIIUnit 13 } cmcIIIUnitLoadTable OBJECT-TYPE SYNTAX SEQUENCE OF CmcIIIUnitLoadEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of system load entries." ::= { cmcIIIUnit 14 } cmcIIIUnitLoadEntry OBJECT-TYPE SYNTAX CmcIIIUnitLoadEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of system load table." INDEX { cmcIIIUnitLoadIndex } ::= { cmcIIIUnitLoadTable 1 } CmcIIIUnitLoadEntry ::= SEQUENCE { cmcIIIUnitLoadIndex Unsigned32, cmcIIIUnitLoadAverage Unsigned32 } cmcIIIUnitLoadIndex OBJECT-TYPE SYNTAX Unsigned32 (1..10) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the system load table. These are the past minutes the load is given for." ::= { cmcIIIUnitLoadEntry 1 } cmcIIIUnitLoadAverage OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "System load average multiplied by 100." ::= { cmcIIIUnitLoadEntry 2 } -- ============================================================================= -- cmcIIISetup: -- cmcIIILastChangeSetup OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Last change of configuration according to operating time cmcIIIUnitUpTime." ::= { cmcIIISetup 1 } -- cmcIIISetupGeneral: -- cmcIIISetTempUnit OBJECT-TYPE SYNTAX INTEGER { celsius (1), fahrenheit (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Unit of all temperature values and setpoints." DEFVAL { celsius } ::= { cmcIIISetupGeneral 1 } cmcIIISetBeeper OBJECT-TYPE SYNTAX INTEGER { off (1), on (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Audible alarm in CMCIII unit: (1) beeper is off (general) (2) beeper is on." DEFVAL { off } ::= { cmcIIISetupGeneral 2 } cmcIIIQuitRelay OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable acknowledging currently active alarm relay (with 'C' on CMCIII)." DEFVAL { disabled } ::= { cmcIIISetupGeneral 3 } cmcIIILogicRelay OBJECT-TYPE SYNTAX INTEGER { closeAtAlarm (1), openAtAlarm (2), disabled (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Logic of alarm relay: (1) Relay will pick up in case of an alarm (2) Relay will release in case of an alarm (3) Relay disabled." DEFVAL { closeAtAlarm } ::= { cmcIIISetupGeneral 4 } cmcIIIUnitMsgRelay OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Alarm relay in case of Device Messages (detect, lost, changed..): (1) Relay disabled, relay will not switch in case of a device message (2) Relay enabled, relay will switch in case of a unit message." DEFVAL { disabled } ::= { cmcIIISetupGeneral 5 } cmcIIIFunctionRelay OBJECT-TYPE SYNTAX INTEGER { warningOnly (1), alarmOnly (2), warningOrAlarm (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Logic of alarm relay: (1) Relay will switch in case of a warning only (2) Relay will switch in case of an alarm only (3) Relay will switch in case of an alarm or warning." DEFVAL { warningOnly } ::= { cmcIIISetupGeneral 6 } cmcIIITimeZone OBJECT-TYPE SYNTAX Integer32 (0..74) MAX-ACCESS read-write STATUS current DESCRIPTION "Time Zone 0 : (GMT-12:00) International Date Line West 1 : (GMT-11:00) Midway Island, Samoa 2 : (GMT-10:00) Hawaii 3 : (GMT-09:00) Alaska 4 : (GMT-08:00) Pacific Time (US and Canada), Tijuana 5 : (GMT-07:00) Arizona 6 : (GMT-07:00) Chihuahua, La Paz, Mazatlan 7 : (GMT-07:00) Mountain Time (US & Canada) 8 : (GMT-06:00) Central America 9 : (GMT-06:00) Central Time (US and Canada) 10 : (GMT-06:00) Guadalajara, Mexico City, Monterrey 11 : (GMT-06:00) Saskatchewan 12 : (GMT-05:00) Bogota, Lima, Quito 13 : (GMT-05:00) Eastern Time (Us and Canada) 14 : (GMT-05:00) Indiana (East) 15 : (GMT-04:00) Atlantic Time (Canada) 16 : (GMT-04:00) Caracas, La Paz 17 : (GMT-04:00) Santiago 18 : (GMT-03:30) Newfoundland 19 : (GMT-03:00) Brasilia 20 : (GMT-03:00) Buenos Aires, Georgetown 21 : (GMT-03:00) Greenland 22 : (GMT-02:00) Mid-Atlantic 23 : (GMT-01:00) Azores 24 : (GMT-01:00) Cape Verde Is. 25 : (GMT) Casablanca, Monrovia 26 : (GMT) Greenwich Mean Time : Dublin, Lisbon, London 27 : (GMT+01:00) Amsterdam, Berlin, Bern, Rome, Vienna 28 : (GMT+01:00) Belgrade, Bratislava, Budapest, Prague 29 : (GMT+01:00) Brussels, Copenhagen, Madrid, Paris 30 : (GMT+01:00) Sarajevo, Skopje, Warsaw, Zagreb 31 : (GMT+01:00) West Central Africa 32 : (GMT+02:00) Athens, Istanbul, Minsk 33 : (GMT+02:00) Bucharest 34 : (GMT+02:00) Harare, Pretoria 35 : (GMT+02:00) Helsinki, Kyiv, Sofia 36 : (GMT+02:00) Riga, Tallinn, Vilnius 37 : (GMT+02:00) Jerusalem 38 : (GMT+03:00) Baghdad 39 : (GMT+03:00) Kuwait, Riyadh 40 : (GMT+03:00) Moscow, St. Petersburg, Volgograd 41 : (GMT+03:00) Nairobi 42 : (GMT+03:30) Tehran 43 : (GMT+04:00) Abu Dhabi, Muscat 44 : (GMT+04:00) Baku, Tbilisi, Yerevan 45 : (GMT+04:30) Kabul 46 : (GMT+05:00) Ekaterinburg 47 : (GMT+05:00) Islamabad, Karachi, Tashkent 48 : (GMT+05:30) Chennai, Kolkata, Mumbai, New Delhi 49 : (GMT+05:45) Kathmandu 50 : (GMT+06:00) Almaty, Novosibirsk 51 : (GMT+06:00) Astana, Dhaka 52 : (GMT+06:00) Sri Jayawardenepura 53 : (GMT+06:30) Rangoon 54 : (GMT+07:00) Bangkok, Hanoi, Jakarta 55 : (GMT+07:00) Krasnoyarsk 56 : (GMT+08:00) Beijing, Chongqing, Hong Kong, Urumqi 57 : (GMT+08:00) Irkutsk, Ulaan Bataar 58 : (GMT+08:00) Kuala Lumpur, Singapore 59 : (GMT+08:00) Perth 60 : (GMT+08:00) Taipei 61 : (GMT+09:00) Osaka, Sapporo, Tokyo 62 : (GMT+09:00) Seoul 63 : (GMT+09:00) Yakutsk 64 : (GMT+09:30) Adelaide 65 : (GMT+09:30) Darwin 66 : (GMT+10:00) Brisbane 67 : (GMT+10:00) Canberra, Melbourne, Sydney 68 : (GMT+10:00) Guam, Port Moresby 69 : (GMT+10:00) Hobart 70 : (GMT+10:00) Vladivostok 71 : (GMT+11:00) Magadan, Solomon Is., New Caledonia 72 : (GMT+12:00) Auckland, Wellington 73 : (GMT+12:00) Fiji, Kamchatka, Marshall Is. 74 : (GMT+13:00) Nukualofa." DEFVAL { 27 } ::= { cmcIIISetupGeneral 7 } cmcIIISetupDate OBJECT-TYPE SYNTAX DisplayString (SIZE (10..10)) MAX-ACCESS read-write STATUS current DESCRIPTION "Actual date in format DD.MM.YYYY Use UTC date to set date." ::= { cmcIIISetupGeneral 8 } cmcIIISetupTime OBJECT-TYPE SYNTAX DisplayString (SIZE (8..8)) MAX-ACCESS read-write STATUS current DESCRIPTION "Actual time in format HH:MM:SS, HH (0-23), MM (0-59), SS (0-59). Use UTC time to set time." ::= { cmcIIISetupGeneral 9 } cmcIIIWebAccess OBJECT-TYPE SYNTAX BITS { httpEnabled (0), httpsEnabled (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Web access status: (0) httpEnabled : http protocol is enabled (1) httpsEnabled : https protocol is enabled." DEFVAL { { httpEnabled, httpsEnabled } } ::= { cmcIIISetupGeneral 10 } cmcIIIHttpPort OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "TCP/IP port of HTTP daemon." DEFVAL { 80 } ::= { cmcIIISetupGeneral 11 } cmcIIIHttpsPort OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "TCP/IP port of HTTPS daemon." DEFVAL { 443 } ::= { cmcIIISetupGeneral 12 } cmcIIIFtpAccess OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Ftp access: (1) disabled (2) enabled." DEFVAL { enabled } ::= { cmcIIISetupGeneral 13 } cmcIIIFtpPort OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "TCP/IP port of FTP daemon." DEFVAL { 21 } ::= { cmcIIISetupGeneral 14 } cmcIIISshAccess OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Ssh access: (1) disabled (2) enabled." DEFVAL { enabled } ::= { cmcIIISetupGeneral 15 } cmcIIISshPort OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "TCP/IP port of SSH daemon." DEFVAL { 22 } ::= { cmcIIISetupGeneral 16 } cmcIIITelnetAccess OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Telnet access: (1) disabled (2) enabled." DEFVAL { enabled } ::= { cmcIIISetupGeneral 17 } cmcIIITelnetPort OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "TCP/IP port of telnet daemon." DEFVAL { 23 } ::= { cmcIIISetupGeneral 18 } cmcIIILanguage OBJECT-TYPE SYNTAX INTEGER { english (1), german (2), french (3), spanish (4), portuguese (5), russian (6), chinese (7), japanese (8) } MAX-ACCESS read-write STATUS current DESCRIPTION "Language: (1) English. (2) German, (3) French, (4) Spanish, (5) Portuguese, (6) Russian, (7) Chinese (8) Japanese." DEFVAL { english } ::= { cmcIIISetupGeneral 19 } cmcIIIOpcUaAccess OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "OPC UA access: (1) disabled (2) enabled." DEFVAL { disabled } ::= { cmcIIISetupGeneral 20 } cmcIIIOpcUaPort OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "TCP/IP port of OPC UA daemon." DEFVAL { 4840 } ::= { cmcIIISetupGeneral 21 } -- cmcIIISetupTimer: -- cmcIIINumberOfTimers OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of value table entries=number of outlets available on this unit." ::= { cmcIIISetupTimer 1 } cmcIIITimerTable OBJECT-TYPE SYNTAX SEQUENCE OF CmcIIITimerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Headline of Timer Table." ::= { cmcIIISetupTimer 2 } cmcIIITimerEntry OBJECT-TYPE SYNTAX CmcIIITimerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of Timer Table." INDEX { cmcIIITimerIndex } ::= { cmcIIITimerTable 1 } CmcIIITimerEntry ::= SEQUENCE { cmcIIITimerIndex Unsigned32, cmcIIITimerStatus INTEGER, cmcIIITimerDayOfWeek INTEGER, cmcIIITimeOn DisplayString, cmcIIITimeOff DisplayString, cmcIIITimeControl INTEGER, cmcIIITimerFunction INTEGER } cmcIIITimerIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the list of timer entries. Its value ranges between 1 and the value of cmcIIINumberOfTimers." ::= { cmcIIITimerEntry 1 } cmcIIITimerStatus OBJECT-TYPE SYNTAX INTEGER { switchedOff (1), switchedOn (2), noTime (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Actual status of the timer." ::= { cmcIIITimerEntry 2 } cmcIIITimerDayOfWeek OBJECT-TYPE SYNTAX INTEGER { sun (1), mon (2), tue (3), wed (4), thu (5), fri (6), sat (7), sat2sun (8), mon2fri (9), mon2sun (10) } MAX-ACCESS read-write STATUS current DESCRIPTION "Selection of day of week for timer to switch." ::= { cmcIIITimerEntry 3 } cmcIIITimeOn OBJECT-TYPE SYNTAX DisplayString (SIZE (5..5)) MAX-ACCESS read-write STATUS current DESCRIPTION "Time to switch on current function, Format: HH:MM." ::= { cmcIIITimerEntry 4 } cmcIIITimeOff OBJECT-TYPE SYNTAX DisplayString (SIZE (5..5)) MAX-ACCESS read-write STATUS current DESCRIPTION "Time to switch off current function, Format: HH:MM." ::= { cmcIIITimerEntry 5 } cmcIIITimeControl OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Control via RTC." ::= { cmcIIITimerEntry 6 } cmcIIITimerFunction OBJECT-TYPE SYNTAX INTEGER { disKeypads (1), unlDoors (2), disTrapRec1 (3), disTrapRec2 (4), disTrapRec3 (5), disTrapRec4 (6), disSMS1 (7), disSMS2 (8), disSMS3 (9), disSMS4 (10), schedule1 (11), schedule2 (12), schedule3 (13), schedule4 (14), schedule5 (15), schedule6 (16), schedule7 (17), schedule8 (18) } MAX-ACCESS read-write STATUS current DESCRIPTION "Function which is controlled via timer 1: Unlock of doors via keypad is disabled 2: Doors will be unlocked 3-6: sending traps to this trap receiver will be disabled 7-10: sending SMS to phone number 1..4 will be disabled 11-18: Scheduled alarm off." ::= { cmcIIITimerEntry 7 } -- cmcIIISetupTrapReceiver: -- cmcIIINumberOfTrapReceivers OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of TrapReceiverTable entries. The number of trap receivers." ::= { cmcIIISetupTrap 1 } cmcIIITrapReceiverTable OBJECT-TYPE SYNTAX SEQUENCE OF CmcIIITrapReceiverEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of trap receiver entries." ::= { cmcIIISetupTrap 2 } cmcIIITrapReceiverEntry OBJECT-TYPE SYNTAX CmcIIITrapReceiverEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of trapTable." INDEX { cmcIIITrapReceiverIndex } ::= { cmcIIITrapReceiverTable 1 } CmcIIITrapReceiverEntry ::= SEQUENCE { cmcIIITrapReceiverIndex Unsigned32, cmcIIITrapReceiverStatus INTEGER, cmcIIITrapReceiverIpAddress DisplayString } cmcIIITrapReceiverIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the trap receiver table. Its value ranges between 1 and the value of NumberOfTrapReceivers." ::= { cmcIIITrapReceiverEntry 1 } cmcIIITrapReceiverStatus OBJECT-TYPE SYNTAX INTEGER { disabled (1), snmpv1Trap (2), snmpv2cTrap (3), snmpv2cInform (4), snmpv3Trap (5), snmpv3Inform (6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable SNMP version and trap/inform type or disable trap receiver. Enumeration type snmpv3Inform(6) is not yet supported." DEFVAL { snmpv1Trap } ::= { cmcIIITrapReceiverEntry 2 } cmcIIITrapReceiverIpAddress OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of trap receiver." ::= { cmcIIITrapReceiverEntry 3 } -- cmcIIISetupSMTP: -- cmcIIISmtpStatus OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "SMTP (email) usage: (1) disabled (2) enabled." DEFVAL { disabled } ::= { cmcIIISetupSMTP 1 } cmcIIISmtpServer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of SMTP server." ::= { cmcIIISetupSMTP 2 } cmcIIISmtpPort OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "TCP/IP port of SMTP server." DEFVAL { 25 } ::= { cmcIIISetupSMTP 3 } cmcIIISmtpAuth OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2), enabledTls (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "SMTP authentication usage: (1) disabled (2) enabled (3) enabled with TLS support." DEFVAL { disabled } ::= { cmcIIISetupSMTP 4 } cmcIIISmtpUsername OBJECT-TYPE SYNTAX DisplayString (SIZE (0..50)) MAX-ACCESS read-write STATUS current DESCRIPTION "Username required to authenticate at the SMTP server." ::= { cmcIIISetupSMTP 5 } cmcIIISmtpPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (0..50)) MAX-ACCESS read-write STATUS current DESCRIPTION "Password required to authenticate at the SMTP server." ::= { cmcIIISetupSMTP 6 } cmcIIISmtpSender OBJECT-TYPE SYNTAX DisplayString (SIZE (0..50)) MAX-ACCESS read-write STATUS current DESCRIPTION "Sender address (FROM:) of the SMTP message." ::= { cmcIIISetupSMTP 7 } cmcIIISmtpReply OBJECT-TYPE SYNTAX DisplayString (SIZE (0..50)) MAX-ACCESS read-write STATUS current DESCRIPTION "Reply address (REPLY:) of the SMTP message." ::= { cmcIIISetupSMTP 8 } cmcIIINumberOfSmtpReceivers OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of SmtpReceiverTable entries. The number of SMTP receivers." ::= { cmcIIISetupSMTP 9 } cmcIIISmtpReceiverTable OBJECT-TYPE SYNTAX SEQUENCE OF CmcIIISmtpReceiverEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of SMTP receiver entries." ::= { cmcIIISetupSMTP 10 } cmcIIISmtpReceiverEntry OBJECT-TYPE SYNTAX CmcIIISmtpReceiverEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of SMTPTable." INDEX { cmcIIISmtpReceiverIndex } ::= { cmcIIISmtpReceiverTable 1 } CmcIIISmtpReceiverEntry ::= SEQUENCE { cmcIIISmtpReceiverIndex Unsigned32, cmcIIISmtpReceiverStatus INTEGER, cmcIIISmtpReceiverAddress DisplayString } cmcIIISmtpReceiverIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the SMTP receiver table. Its value ranges between 1 and the value of NumberOfSmtpReceivers." ::= { cmcIIISmtpReceiverEntry 1 } cmcIIISmtpReceiverStatus OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable SMTP receiver." DEFVAL { disabled } ::= { cmcIIISmtpReceiverEntry 2 } cmcIIISmtpReceiverAddress OBJECT-TYPE SYNTAX DisplayString (SIZE (0..50)) MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of SMTP receiver." ::= { cmcIIISmtpReceiverEntry 3 } -- cmcIIISetupSMS: -- cmcIIISmsStatus OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "SMS usage: (1) disabled (2) enabled." DEFVAL { disabled } ::= { cmcIIISetupSMS 1 } cmcIIISmsPIN OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) MAX-ACCESS read-write STATUS current DESCRIPTION "SMS PIN number." ::= { cmcIIISetupSMS 2 } cmcIIISmsService OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) MAX-ACCESS read-write STATUS current DESCRIPTION "SMS service number." ::= { cmcIIISetupSMS 3 } cmcIIISmsMSN OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) MAX-ACCESS read-write STATUS current DESCRIPTION "SMS MSN for ISDN." ::= { cmcIIISetupSMS 4 } cmcIIISmsPreDial OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) MAX-ACCESS read-write STATUS current DESCRIPTION "SMS PreDial number." ::= { cmcIIISetupSMS 5 } cmcIIINumberOfSmsReceivers OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of SmsReceiverTable entries. The number of SMS receivers." ::= { cmcIIISetupSMS 6 } cmcIIISmsReceiverTable OBJECT-TYPE SYNTAX SEQUENCE OF CmcIIISmsReceiverEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of SMS receiver entries." ::= { cmcIIISetupSMS 7 } cmcIIISmsReceiverEntry OBJECT-TYPE SYNTAX CmcIIISmsReceiverEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of SMSTable." INDEX { cmcIIISmsReceiverIndex } ::= { cmcIIISmsReceiverTable 1 } CmcIIISmsReceiverEntry ::= SEQUENCE { cmcIIISmsReceiverIndex Unsigned32, cmcIIISmsReceiverStatus INTEGER, cmcIIISmsReceiverNumber DisplayString } cmcIIISmsReceiverIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the SMS receiver table. Its value ranges between 1 and the value of NumberOfSmsReceivers." ::= { cmcIIISmsReceiverEntry 1 } cmcIIISmsReceiverStatus OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable SMS receiver." DEFVAL { disabled } ::= { cmcIIISmsReceiverEntry 2 } cmcIIISmsReceiverNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) MAX-ACCESS read-write STATUS current DESCRIPTION "Phone number of SMS receiver." ::= { cmcIIISmsReceiverEntry 3 } -- cmcIIISetupSysLog: -- cmcIIISysLogStatus OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "SysLog usage: (1) disabled (2) enabled." DEFVAL { disabled } ::= { cmcIIISetupSysLog 1 } cmcIIISysLogFacility OBJECT-TYPE SYNTAX INTEGER { local0 (1), local1 (2), local2 (3), local3 (4), local4 (5), local5 (6), local6 (7), local7 (8) } MAX-ACCESS read-write STATUS current DESCRIPTION "SysLog facility local0..7." DEFVAL { local0 } ::= { cmcIIISetupSysLog 2 } cmcIIISysLogServer1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of first SysLog server." ::= { cmcIIISetupSysLog 3 } cmcIIISysLogServer2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of second SysLog server." ::= { cmcIIISetupSysLog 4 } -- cmcIIISetupNTP: -- cmcIIINtpStatus OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "NTP usage: (1) disabled (2) enabled." DEFVAL { disabled } ::= { cmcIIISetupNTP 1 } cmcIIINtpTimeZone OBJECT-TYPE SYNTAX Integer32 (0..74) MAX-ACCESS read-write STATUS current DESCRIPTION "NTP time zone, see cmcIIITimeZone for valid time zones." DEFVAL { 27 } ::= { cmcIIISetupNTP 2 } cmcIIINtpServer1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of first NTP server." ::= { cmcIIISetupNTP 3 } cmcIIINtpServer2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of second NTP server." ::= { cmcIIISetupNTP 4 } -- cmcIIISetupLDAP: -- cmcIIILdapStatus OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "LDAP usage: (1) disabled (2) enabled." DEFVAL { disabled } ::= { cmcIIISetupLDAP 1 } cmcIIILdapServer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of LDAP server." ::= { cmcIIISetupLDAP 2 } cmcIIILdapBindDN OBJECT-TYPE SYNTAX DisplayString (SIZE (0..100)) MAX-ACCESS read-write STATUS current DESCRIPTION "LDAP user name." ::= { cmcIIISetupLDAP 3 } cmcIIILdapBindPW OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "LDAP user password." ::= { cmcIIISetupLDAP 4 } cmcIIILdapUserBase OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "LDAP base user." ::= { cmcIIISetupLDAP 5 } cmcIIILdapUserSearch OBJECT-TYPE SYNTAX DisplayString (SIZE (0..200)) MAX-ACCESS read-write STATUS current DESCRIPTION "LDAP searchpath user." ::= { cmcIIISetupLDAP 6 } cmcIIILdapUserAttrib OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "LDAP attribute user." ::= { cmcIIISetupLDAP 7 } cmcIIILdapGroupBase OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "LDAP base group." ::= { cmcIIISetupLDAP 8 } cmcIIILdapGroupSearch OBJECT-TYPE SYNTAX DisplayString (SIZE (0..200)) MAX-ACCESS read-write STATUS current DESCRIPTION "LDAP searchpath group." ::= { cmcIIISetupLDAP 9 } cmcIIILdapGroupAttrib OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "LDAP attribute group." ::= { cmcIIISetupLDAP 10 } -- cmcIIIShutdown: -- cmcIIINumberOfShutdowns OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of cmcIIIShutdownTable entries. The number of shutdown servers." ::= { cmcIIISetupShutdown 1 } cmcIIIShutdownTable OBJECT-TYPE SYNTAX SEQUENCE OF CmcIIIShutdownEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of shutdown entries." ::= { cmcIIISetupShutdown 2 } cmcIIIShutdownEntry OBJECT-TYPE SYNTAX CmcIIIShutdownEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of Shutdown table." INDEX { cmcIIIShutdownIndex } ::= { cmcIIIShutdownTable 1 } CmcIIIShutdownEntry ::= SEQUENCE { cmcIIIShutdownIndex Unsigned32, cmcIIIShutdownServer DisplayString, cmcIIIShutdownName DisplayString, cmcIIIShutdownPort Unsigned32, cmcIIIShutdownDelay Unsigned32, cmcIIIShutdownEnabled INTEGER } cmcIIIShutdownIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the shutdown server table. Its value ranges between 1 and the value of cmcIIINumberOfShutdowns." ::= { cmcIIIShutdownEntry 1 } cmcIIIShutdownServer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "IP address or name of server to shutdown." ::= { cmcIIIShutdownEntry 2 } cmcIIIShutdownName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Name of server to shutdown." ::= { cmcIIIShutdownEntry 3 } cmcIIIShutdownPort OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Port used to shutdown server." DEFVAL { 6003 } ::= { cmcIIIShutdownEntry 4 } cmcIIIShutdownDelay OBJECT-TYPE SYNTAX Unsigned32 (0..999) MAX-ACCESS read-write STATUS current DESCRIPTION "Delay of server shutdown." DEFVAL { 0 } ::= { cmcIIIShutdownEntry 5 } cmcIIIShutdownEnabled OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable this server shutdown entry." DEFVAL { disabled } ::= { cmcIIIShutdownEntry 6 } -- cmcIIISetupModbus: -- cmcIIIModbusStatus OBJECT-TYPE SYNTAX INTEGER { shutdown (1), readonly (2), writeonly (3), readwrite (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Modbus daemon running status: (1) shutdown (2) readonly (3) writeonly (4) readwrite." DEFVAL { readonly } ::= { cmcIIISetupModbus 1 } cmcIIIModbusPort OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "TCP/IP port of Modbus daemon." DEFVAL { 502 } ::= { cmcIIISetupModbus 2 } cmcIIINumberOfModbusSources OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of cmcIIIModbusTable entries. The number of Modbus access settings." ::= { cmcIIISetupModbus 3 } cmcIIIModbusTable OBJECT-TYPE SYNTAX SEQUENCE OF CmcIIIModbusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Modbus entries." ::= { cmcIIISetupModbus 4 } cmcIIIModbusEntry OBJECT-TYPE SYNTAX CmcIIIModbusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of Modbus table." INDEX { cmcIIIModbusIndex } ::= { cmcIIIModbusTable 1 } CmcIIIModbusEntry ::= SEQUENCE { cmcIIIModbusIndex Unsigned32, cmcIIIModbusAccess INTEGER, cmcIIIModbusSource DisplayString } cmcIIIModbusIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the Modbus access table. Its value ranges between 1 and the value of cmcIIINumberOfModbusSources." ::= { cmcIIIModbusEntry 1 } cmcIIIModbusAccess OBJECT-TYPE SYNTAX INTEGER { readonly (1), readwrite (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Modbus access for this source entry: (1) readonly (2) readwrite This access is inferior to cmcIIIModbusStatus, e.g. readwrite access also requires readwrite status." DEFVAL { readonly } ::= { cmcIIIModbusEntry 2 } cmcIIIModbusSource OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Source to restrict Modbus access. It can either be a specific hostname, IP address, or a subnet represented as IP/MASK (e.g. 10.10.10.0/255.255.255.0), or IP/BITS (e.g. 10.10.10.0/24), or the IPv6 equivalents. The same source can be specified in several separate entries (presumably with different access tokens), and the first combination that matches the incoming request will be selected." ::= { cmcIIIModbusEntry 3 } -- cmcIIISetupRadius: -- cmcIIIRadiusStatus OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Radius usage: (1) disabled (2) enabled." DEFVAL { disabled } ::= { cmcIIISetupRadius 1 } cmcIIIRadiusServer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of Radius server." ::= { cmcIIISetupRadius 2 } cmcIIIRadiusPort OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "TCP/IP port of Radius server." DEFVAL { 1812 } ::= { cmcIIISetupRadius 3 } cmcIIIRadiusPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Password required to authenticate at the Radius server." ::= { cmcIIISetupRadius 4 } cmcIIIRadiusGroupMode OBJECT-TYPE SYNTAX INTEGER { manual (1), byAttribute (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Radius group method: (1) manual (2) byAttribute." DEFVAL { manual } ::= { cmcIIISetupRadius 5 } cmcIIIRadiusGroupId OBJECT-TYPE SYNTAX Unsigned32 (1..32) MAX-ACCESS read-write STATUS current DESCRIPTION "Radius group id." ::= { cmcIIISetupRadius 6 } cmcIIIRadiusAuth OBJECT-TYPE SYNTAX INTEGER { auto (1), pap (2), chap (3), mschap (4), md5 (5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Radius authentification method: (1) auto - not supported (2) pap (3) chap (4) mschap (5) md5." DEFVAL { pap } ::= { cmcIIISetupRadius 7 } -- cmcIIISetupWebCam: -- cmcIIIWebCamStatus OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "WebCam usage: (1) disabled (2) enabled." DEFVAL { disabled } ::= { cmcIIISetupWebCam 1 } cmcIIIWebCamServer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of WebCam." ::= { cmcIIISetupWebCam 2 } cmcIIIWebCamUsername OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) MAX-ACCESS read-write STATUS current DESCRIPTION "Username required to authenticate at the WebCam server." ::= { cmcIIISetupWebCam 3 } cmcIIIWebCamPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Password required to authenticate at the WebCam server." ::= { cmcIIISetupWebCam 4 } cmcIIIWebCamIntervall OBJECT-TYPE SYNTAX Unsigned32 (5..100) MAX-ACCESS read-write STATUS current DESCRIPTION "WebCam snapshot intervall in 1/10 seconds." DEFVAL { 10 } ::= { cmcIIISetupWebCam 5 } cmcIIIWebCamNumberofImages OBJECT-TYPE SYNTAX Unsigned32 (1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "WebCam number of images per event." DEFVAL { 8 } ::= { cmcIIISetupWebCam 6 } cmcIIIWebCamDestination OBJECT-TYPE SYNTAX INTEGER { usb (1), sd (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "WebCam storage destination: (1) usb (2) sd." DEFVAL { usb } ::= { cmcIIISetupWebCam 7 } -- ============================================================================= -- cmcIIIDevs: -- cmcIIIOverallDevStatus OBJECT-TYPE SYNTAX INTEGER { ok (1), warning (2), alarm (3), detected (4), lost (5), changed (6), update (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Overall status of all devices." ::= { cmcIIIDevInfo 1 } cmcIIINumberOfDevs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of devices available." ::= { cmcIIIDevInfo 2 } cmcIIILastChangeOverallDevStatus OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of last status change of any device connected to CMCIII PU according to operating time cmcIIIUnitUpTime." ::= { cmcIIIDevInfo 3 } cmcIIILastChangeNumberOfDevs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of last device number change according to operating time cmcIIIUnitUpTime." ::= { cmcIIIDevInfo 4 } cmcIIILastChangeDevSettings OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of last setting change of any device connected to CMCIII PU according to operating time cmcIIIUnitUpTime. This timestamp will be affected by SNMP settings only!" ::= { cmcIIIDevInfo 5 } cmcIIILastChangeDevs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of last device change according to operating time cmcIIIUnitUpTime." ::= { cmcIIIDevInfo 6 } cmcIIIDevTable OBJECT-TYPE SYNTAX SEQUENCE OF CmcIIIDevEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Headline of device table." ::= { cmcIIIDevs 2 } cmcIIIDevEntry OBJECT-TYPE SYNTAX CmcIIIDevEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of device table." INDEX { cmcIIIDevIndex } ::= { cmcIIIDevTable 1 } CmcIIIDevEntry ::= SEQUENCE { cmcIIIDevIndex Unsigned32, cmcIIIDevName DisplayString, cmcIIIDevAlias DisplayString, cmcIIIDevType OBJECT IDENTIFIER, cmcIIIDevNodeID Integer32, cmcIIIDevStatus INTEGER, cmcIIIDevArtNr DisplayString, cmcIIIDevLocation DisplayString, cmcIIIDevBus INTEGER, cmcIIIDevPos Integer32, cmcIIIDevFW DisplayString, cmcIIIDevHW DisplayString, cmcIIIDevSerial DisplayString, cmcIIIDevProductWeek DisplayString, cmcIIIDevLastChange Unsigned32, cmcIIIDevURL DisplayString, cmcIIIDevNumberOfVars Integer32, cmcIIIDevNumberOfMsgs Integer32, cmcIIIDevStatusText DisplayString, cmcIIIDevCurrentMinConsumption Integer32, cmcIIIDevCurrentMaxConsumption Integer32, cmcIIIDevEntPhysicalIndex Integer32, cmcIIIDevAssembly DisplayString } cmcIIIDevIndex OBJECT-TYPE SYNTAX Unsigned32 (1..126) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of device connected to CMCIII PU." ::= { cmcIIIDevEntry 1 } cmcIIIDevName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the device connected to CMCIII PU." ::= { cmcIIIDevEntry 2 } cmcIIIDevAlias OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "Descriptional text for device connected to CMCIII PU." ::= { cmcIIIDevEntry 3 } cmcIIIDevType OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION "Type of device chassis connected to CMCIII PU. The authoritative identification of the device contained in the entity is allocated within the SMI cmcIIIProducts subtree (1.3.6.1.4.1.2606.7.7) and provides an easy and unambiguous means for determining `what kind of box' is connected. E.g.: in cmcIIIProductChassis (1.3.6.1.4.1.2606.7.7.4.x) the placeholder x is used for 1 : Not Available 2 : Internal Device of Processing Unit 3 : Virtual Device 4 : Temperature Sensor 7030.110 5 : Temp/Humidity Sensor 7030.111 6 : Vandalism Sensor 7030.130 7 : Access Sensor 7030.120 8 : Door Lock Device 7030.200, .210 9 : Universal Sensor 7030.190 10: Sensor Gateway 7030.100 11: Power Unit 7030.050 12: Pressure Sensor 7030.150 20-25: Gateways to RS422, RS485." ::= { cmcIIIDevEntry 4 } cmcIIIDevNodeID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Node ID of device connected to CMCIII PU." ::= { cmcIIIDevEntry 5 } cmcIIIDevStatus OBJECT-TYPE SYNTAX INTEGER { notAvail (1), ok (2), detect (3), lost (4), changed (5), error (6), fwUpdate (7), fwUpdateRun (8) } MAX-ACCESS read-only STATUS current DESCRIPTION "General Status of device connected to CMCIII PU (1) Device not available (2) OK (3) Device detected, confirmation required (4) Device lost (disconnected), confirmation required (5) Device changed (6) Error (7) Firmware Update pending (8) Firmware Update running." ::= { cmcIIIDevEntry 6 } cmcIIIDevArtNr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) MAX-ACCESS read-only STATUS current DESCRIPTION "Article number of device connected to CMCIII PU." ::= { cmcIIIDevEntry 7 } cmcIIIDevLocation OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "Location of device connected to CMCIII PU." ::= { cmcIIIDevEntry 8 } cmcIIIDevBus OBJECT-TYPE SYNTAX INTEGER { canBus1 (1), canBus2 (2), virtual (3), modbus (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "CAN bus of device connected to CMCIII PU." ::= { cmcIIIDevEntry 9 } cmcIIIDevPos OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Position (order) of device in CAN bus connected to CMCIII PU." ::= { cmcIIIDevEntry 10 } cmcIIIDevFW OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) MAX-ACCESS read-only STATUS current DESCRIPTION "FW version of device connected to CMCIII PU." ::= { cmcIIIDevEntry 11 } cmcIIIDevHW OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) MAX-ACCESS read-only STATUS current DESCRIPTION "HW version of device connected to CMCIII PU." ::= { cmcIIIDevEntry 12 } cmcIIIDevSerial OBJECT-TYPE SYNTAX DisplayString (SIZE (8..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Serial number of device connected to CMCIII PU." ::= { cmcIIIDevEntry 13 } cmcIIIDevProductWeek OBJECT-TYPE SYNTAX DisplayString (SIZE (8..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Production week of device connected to CMCIII PU." ::= { cmcIIIDevEntry 14 } cmcIIIDevLastChange OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of last change of device connected to CMCIII PU according to operating time cmcIIIUnitUpTime." ::= { cmcIIIDevEntry 15 } cmcIIIDevURL OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) MAX-ACCESS read-only STATUS current DESCRIPTION "URL to device page of CMCIII PU (if available)." ::= { cmcIIIDevEntry 16 } cmcIIIDevNumberOfVars OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of variables available on this device. This variable will give the number of rows of the variable table cmcIIIVarTable belonging to this device." ::= { cmcIIIDevEntry 17 } cmcIIIDevNumberOfMsgs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of messages available in this device. This variable will give the number of rows of the message table cmcIIIMsgTable belonging to this device." ::= { cmcIIIDevEntry 18 } cmcIIIDevStatusText OBJECT-TYPE SYNTAX DisplayString (SIZE (0..160)) MAX-ACCESS read-only STATUS current DESCRIPTION "Latest status of this device." ::= { cmcIIIDevEntry 19 } cmcIIIDevCurrentMinConsumption OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Standby power consumption of device in mA." ::= { cmcIIIDevEntry 20 } cmcIIIDevCurrentMaxConsumption OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximal power consumption of device in mA." ::= { cmcIIIDevEntry 21 } cmcIIIDevEntPhysicalIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Corresponding entPhysicalIndex of this device. 0 if none exists." ::= { cmcIIIDevEntry 22 } cmcIIIDevAssembly OBJECT-TYPE SYNTAX DisplayString (SIZE (0..100)) MAX-ACCESS read-only STATUS current DESCRIPTION "Assembly of this device." ::= { cmcIIIDevEntry 23 } -- ============================================================================= -- cmcIIIVars: -- cmcIIINumberOfVars OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of variables available." ::= { cmcIIIVarInfo 1 } cmcIIILastChangeNumberOfVars OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of last change number of variables according to operating time cmcIIIUnitUpTime." ::= { cmcIIIVarInfo 2 } cmcIIILastChangeVarSettings OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of last setting change according to operating time cmcIIIUnitUpTime This timestamp will be affected by SNMP settings only!" ::= { cmcIIIVarInfo 3 } cmcIIILastChangeVars OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of last variable change according to operating time cmcIIIUnitUpTime." ::= { cmcIIIVarInfo 4 } cmcIIIVarByQualityHide OBJECT-TYPE SYNTAX BITS { -- notInUse is a dummy entry to keep mapping to cmcIIIVarQuality and avoid warnings of MIB checking using smilint! notInUse (0), undefined (1), ok (2), warning (3), alarm (4), info (5), undefinedNoValue(21), okNoValue (22), warningNoValue (23), alarmNoValue (24), infoNoValue (25) } MAX-ACCESS read-write STATUS current DESCRIPTION "Hide entries in cmcIIIVarByQualityTable to reduce table size." DEFVAL {{ ok }} ::= { cmcIIIVarInfo 5 } cmcIIIDynUpdateRate OBJECT-TYPE SYNTAX Unsigned32 (5..86400) MAX-ACCESS read-write STATUS current DESCRIPTION "Update rate in seconds to add/remove entries from cmcIIIVarIntDynTable and cmcIIIVarStrDynTable. Note: cmcIIIDynUpdateHistory (>0) has to be at least twice cmcIIIDynUpdateRate." DEFVAL { 10 } ::= { cmcIIIVarInfo 6 } cmcIIIDynUpdateHistory OBJECT-TYPE SYNTAX Unsigned32 (0 | 10..2419200) MAX-ACCESS read-write STATUS current DESCRIPTION "History range in seconds to restrict data view in cmcIIIVarIntDynTable and cmcIIIVarStrDynTable. The value 0 will disable the history range restriction completly. Note: cmcIIIDynUpdateHistory (>0) has to be at least twice cmcIIIDynUpdateRate." DEFVAL { 300 } ::= { cmcIIIVarInfo 7 } -- table with entry for each variable available on this unit cmcIIIVarTable OBJECT-TYPE SYNTAX SEQUENCE OF CmcIIIVarEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Headline of variable table." ::= { cmcIIIVars 2 } cmcIIIVarEntry OBJECT-TYPE SYNTAX CmcIIIVarEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of variable table." INDEX { cmcIIIVarDeviceIndex,cmcIIIVarIndex } ::= { cmcIIIVarTable 1 } CmcIIIVarEntry ::= SEQUENCE { cmcIIIVarDeviceIndex Unsigned32, cmcIIIVarIndex Unsigned32, cmcIIIVarName DisplayString, cmcIIIVarType INTEGER, cmcIIIVarUnit DisplayString, cmcIIIVarDataType INTEGER, cmcIIIVarScale Integer32, cmcIIIVarConstraints DisplayString, cmcIIIVarSteps Integer32, cmcIIIVarValueStr DisplayString, cmcIIIVarValueInt Integer32, cmcIIIVarLastChange Unsigned32, cmcIIIVarAccess INTEGER, cmcIIIVarQuality INTEGER, cmcIIIVarEntPhysicalIndex Integer32 } cmcIIIVarDeviceIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the device. Its value ranges between 1 and the value of cmcIIINumberOfDevs." ::= { cmcIIIVarEntry 1 } cmcIIIVarIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the list of value entries. Its value ranges between 1 and the value of cmcIIINumberOfVars." ::= { cmcIIIVarEntry 2 } cmcIIIVarName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..50)) MAX-ACCESS read-only STATUS current DESCRIPTION "Clear name of variable." ::= { cmcIIIVarEntry 3 } cmcIIIVarType OBJECT-TYPE SYNTAX INTEGER { description (1), value (2), setHigh (3), setWarn (4), setLow (5), hysteresis (6), status (7), statusEnum (8), setWarnLow (9), unit (10), alarmDur (11), steps (12), configPar (13), category (14), logic (15), logicEnum (16), setCntrl (17), offset (18), type (19), output (20), outputdelay (21), outputaction (22), outdelayExec (23), outputEnum (24), config (25), configNum (26), configLcpFcs (27), assembly (28), configWiring (29), sensitivity (30), accessTime (31), accessLogic (32), position (33), positionEnum (34), pin (35), sequence (36), remote (37), stringValue (38), outputPWM (40), rotation (41), circuit (42), rizoneArray (43), socketType (44), customValue (45), rcmPosition (46), rcmPosEnum (47), rcmResult (48), productDate (50), orderNr (51), devName (52), devLocation (53), currentMin (54), currentMax (55), keycode (80), command (81), commandEnum (82), commandKeypad (83), commandService (84), commandRack (85), commandRCM (86), unitType (90), swVersion (91), serialNumber (92), mountPos (93), mountPosEnum (94), gsmStatus (95), connected (96), connectedEnum (97), grouping (100), scaleValue (110), scaleUnit (111), scaleStart (112), scaleEnd (113), commandCtrl (120), commandCtrlDP (121), commandCtrlWdt (122), fanAffect (123), waterAffect (124), commandDP (125), commandBEP (126), commandMiniCh (127), remoteBEP (128), location (130), building (131), level (132), room (133), row (134), rack (135), operatingTime (136), numberOfRU (137), tagsQuit (138), tagsChanged (139), uid (140), opModeMiniCh (145), opModeBEP (146), ignore (254), illegal (255) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of variable." ::= { cmcIIIVarEntry 4 } cmcIIIVarUnit OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) MAX-ACCESS read-only STATUS current DESCRIPTION "Unit of variable e. g. degree C." ::= { cmcIIIVarEntry 5 } cmcIIIVarDataType OBJECT-TYPE SYNTAX INTEGER { notAvail (1), int (2), string (3), enum (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Datatype of variable." ::= { cmcIIIVarEntry 6 } cmcIIIVarScale OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Scaling factor of variable value, e. g. -100 -> value has to be divided by 100 +100 -> value has to be multiplied by 100." ::= { cmcIIIVarEntry 7 } cmcIIIVarConstraints OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Constraints of value, e. g. [-_ a-zA-Z0-9]+ (if VariableDatatype is 'string')." ::= { cmcIIIVarEntry 8 } cmcIIIVarSteps OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Steps of variable value (resolution)." ::= { cmcIIIVarEntry 9 } cmcIIIVarValueStr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "Value as string, including sign (+/-) and unit (degree C)." ::= { cmcIIIVarEntry 10 } cmcIIIVarValueInt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Value as integer." ::= { cmcIIIVarEntry 11 } cmcIIIVarLastChange OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of last update or change according to operating time cmcIIIUnitUpTime." ::= { cmcIIIVarEntry 12 } cmcIIIVarAccess OBJECT-TYPE SYNTAX INTEGER { none (1), readonly (2), readwrite (3), readwriteswitch (4), readwriteextended(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Access for value." ::= { cmcIIIVarEntry 13 } cmcIIIVarQuality OBJECT-TYPE SYNTAX INTEGER { undefined (1), ok (2), warning (3), alarm (4), info (5), undefinedNoValue(21), okNoValue (22), warningNoValue (23), alarmNoValue (24), infoNoValue (25) } MAX-ACCESS read-only STATUS current DESCRIPTION "Quality of variable." ::= { cmcIIIVarEntry 14 } cmcIIIVarEntPhysicalIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Corresponding entPhysicalIndex of this variable. 0 if none exists." ::= { cmcIIIVarEntry 15 } -- table with entry for each variable available on this unit sorted by cmcIIIVarType cmcIIIVarByTypeTable OBJECT-TYPE SYNTAX SEQUENCE OF CmcIIIVarByTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Headline of variable by type table." ::= { cmcIIIVars 3 } cmcIIIVarByTypeEntry OBJECT-TYPE SYNTAX CmcIIIVarByTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of variable by type table." INDEX { cmcIIIVarByTypeType,cmcIIIVarByTypeDeviceIndex,cmcIIIVarByTypeIndex } ::= { cmcIIIVarByTypeTable 1 } CmcIIIVarByTypeEntry ::= SEQUENCE { cmcIIIVarByTypeType INTEGER, cmcIIIVarByTypeDeviceIndex Unsigned32, cmcIIIVarByTypeIndex Unsigned32, cmcIIIVarByTypeValueStr DisplayString, cmcIIIVarByTypeValueInt Integer32, cmcIIIVarByTypeLastChange Unsigned32 } cmcIIIVarByTypeType OBJECT-TYPE SYNTAX INTEGER { description (1), value (2), setHigh (3), setWarn (4), setLow (5), hysteresis (6), status (7), statusEnum (8), setWarnLow (9), unit (10), alarmDur (11), steps (12), configPar (13), category (14), logic (15), logicEnum (16), setCntrl (17), offset (18), type (19), output (20), outputdelay (21), outputaction (22), outdelayExec (23), outputEnum (24), config (25), configNum (26), configLcpFcs (27), assembly (28), configWiring (29), sensitivity (30), accessTime (31), accessLogic (32), position (33), positionEnum (34), pin (35), sequence (36), remote (37), stringValue (38), outputPWM (40), rotation (41), circuit (42), rizoneArray (43), socketType (44), customValue (45), rcmPosition (46), rcmPosEnum (47), rcmResult (48), productDate (50), orderNr (51), devName (52), devLocation (53), currentMin (54), currentMax (55), keycode (80), command (81), commandEnum (82), commandKeypad (83), commandService (84), commandRack (85), commandRCM (86), unitType (90), swVersion (91), serialNumber (92), mountPos (93), mountPosEnum (94), gsmStatus (95), connected (96), connectedEnum (97), grouping (100), scaleValue (110), scaleUnit (111), scaleStart (112), scaleEnd (113), commandCtrl (120), commandCtrlDP (121), commandCtrlWdt (122), fanAffect (123), waterAffect (124), commandDP (125), commandBEP (126), commandMiniCh (127), remoteBEP (128), location (130), building (131), level (132), room (133), row (134), rack (135), operatingTime (136), numberOfRU (137), tagsQuit (138), tagsChanged (139), uid (140), opModeMiniCh (145), opModeBEP (146), ignore (254), illegal (255) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Type of variable." ::= { cmcIIIVarByTypeEntry 1 } cmcIIIVarByTypeDeviceIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the device. Its value ranges between 1 and the value of cmcIIINumberOfDevs." ::= { cmcIIIVarByTypeEntry 2 } cmcIIIVarByTypeIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the list of value entries. Its value ranges between 1 and the value of cmcIIINumberOfVars." ::= { cmcIIIVarByTypeEntry 3 } cmcIIIVarByTypeValueStr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "Value as string, including sign (+/-) and unit (degree C)." ::= { cmcIIIVarByTypeEntry 4 } cmcIIIVarByTypeValueInt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value as integer." ::= { cmcIIIVarByTypeEntry 5 } cmcIIIVarByTypeLastChange OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of last update or change according to operating time cmcIIIUnitUpTime." ::= { cmcIIIVarByTypeEntry 6 } -- table with entry for each variable available on this unit sorted by cmcIIIVarType cmcIIIVarByQualityTable OBJECT-TYPE SYNTAX SEQUENCE OF CmcIIIVarByQualityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Headline of variable by quality table." ::= { cmcIIIVars 4 } cmcIIIVarByQualityEntry OBJECT-TYPE SYNTAX CmcIIIVarByQualityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of variable by quality table. The view of this table may be reduced using the bits of cmcIIIVarByQualityHide." INDEX { cmcIIIVarByQualityQuality,cmcIIIVarByQualityDeviceIndex,cmcIIIVarByQualityIndex } ::= { cmcIIIVarByQualityTable 1 } CmcIIIVarByQualityEntry ::= SEQUENCE { cmcIIIVarByQualityQuality INTEGER, cmcIIIVarByQualityDeviceIndex Unsigned32, cmcIIIVarByQualityIndex Unsigned32, cmcIIIVarByQualityValueStr DisplayString, cmcIIIVarByQualityValueInt Integer32, cmcIIIVarByQualityLastChange Unsigned32 } cmcIIIVarByQualityQuality OBJECT-TYPE SYNTAX INTEGER { undefined (1), ok (2), warning (3), alarm (4), info (5), undefinedNoValue(21), okNoValue (22), warningNoValue (23), alarmNoValue (24), infoNoValue (25) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Quality of variable." ::= { cmcIIIVarByQualityEntry 1 } cmcIIIVarByQualityDeviceIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the device. Its value ranges between 1 and the value of cmcIIINumberOfDevs." ::= { cmcIIIVarByQualityEntry 2 } cmcIIIVarByQualityIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the list of value entries. Its value ranges between 1 and the value of cmcIIINumberOfVars." ::= { cmcIIIVarByQualityEntry 3 } cmcIIIVarByQualityValueStr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "Value as string, including sign (+/-) and unit (degree C)." ::= { cmcIIIVarByQualityEntry 4 } cmcIIIVarByQualityValueInt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value as integer." ::= { cmcIIIVarByQualityEntry 5 } cmcIIIVarByQualityLastChange OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of last update or change according to operating time cmcIIIUnitUpTime." ::= { cmcIIIVarByQualityEntry 6 } -- table with entry for each dynamic integer variable (cmcIIIVarDataType = int(2) or enum(4)) available on this unit cmcIIIVarIntDynTable OBJECT-TYPE SYNTAX SEQUENCE OF CmcIIIVarIntDynEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Headline of dynamically changed variable table of cmcIIIVarDatatype int(2) or enum(4). This table is updated each cmcIIIVarDynUpdateRate seconds only. This table has variables updated/changed within the last cmcIIIVarDynUpdateHistory seconds only. This table has dynamic integer variables (cmcIIIVarDataType = int(2) or enum(4)) only." ::= { cmcIIIVars 5 } cmcIIIVarIntDynEntry OBJECT-TYPE SYNTAX CmcIIIVarIntDynEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of dynamically changed table." INDEX { cmcIIIVarIntDynDeviceIndex,cmcIIIVarIntDynIndex,cmcIIIVarIntDynLastChange } ::= { cmcIIIVarIntDynTable 1 } CmcIIIVarIntDynEntry ::= SEQUENCE { cmcIIIVarIntDynDeviceIndex Unsigned32, cmcIIIVarIntDynIndex Unsigned32, cmcIIIVarIntDynLastChange Unsigned32, cmcIIIVarIntDynValue Integer32 } cmcIIIVarIntDynDeviceIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the device. Its value ranges between 1 and the value of cmcIIINumberOfDevs." ::= { cmcIIIVarIntDynEntry 1 } cmcIIIVarIntDynIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the list of value entries. Its value ranges between 1 and the value of cmcIIINumberOfVars." ::= { cmcIIIVarIntDynEntry 2 } cmcIIIVarIntDynLastChange OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Timestamp of last update or change according to operating time cmcIIIUnitUpTime. Entries may be restricted by cmcIIIDynUpdateHistory." ::= { cmcIIIVarIntDynEntry 3 } cmcIIIVarIntDynValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value as integer." ::= { cmcIIIVarIntDynEntry 4 } -- table with entry for each dynamic string variable (cmcIIIVarDataType = string(3)) available on this unit cmcIIIVarStrDynTable OBJECT-TYPE SYNTAX SEQUENCE OF CmcIIIVarStrDynEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Headline of dynamically changed variable table of cmcIIIVarDataType string(3). This table is updated each cmcIIIVarDynUpdateRate seconds only. This table has variables updated/changed within the last cmcIIIVarDynUpdateHistory seconds only. This table has dynamic string variables (cmcIIIVarDataType = string(3)) only. Please note, this table will be empty in most cases as strings are rarely changing." ::= { cmcIIIVars 6 } cmcIIIVarStrDynEntry OBJECT-TYPE SYNTAX CmcIIIVarStrDynEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of dynamically changed table." INDEX { cmcIIIVarStrDynDeviceIndex,cmcIIIVarStrDynIndex,cmcIIIVarStrDynLastChange } ::= { cmcIIIVarStrDynTable 1 } CmcIIIVarStrDynEntry ::= SEQUENCE { cmcIIIVarStrDynDeviceIndex Unsigned32, cmcIIIVarStrDynIndex Unsigned32, cmcIIIVarStrDynLastChange Unsigned32, cmcIIIVarStrDynValue DisplayString } cmcIIIVarStrDynDeviceIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the device. Its value ranges between 1 and the value of cmcIIINumberOfDevs." ::= { cmcIIIVarStrDynEntry 1 } cmcIIIVarStrDynIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the list of value entries. Its value ranges between 1 and the value of cmcIIINumberOfVars." ::= { cmcIIIVarStrDynEntry 2 } cmcIIIVarStrDynLastChange OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Timestamp of last update or change according to operating time cmcIIIUnitUpTime. Entries may be restricted by cmcIIIDynUpdateHistory." ::= { cmcIIIVarStrDynEntry 3 } cmcIIIVarStrDynValue OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "Value as string." ::= { cmcIIIVarStrDynEntry 4 } -- ============================================================================= -- cmcIIIMsgs: -- cmcIIIOverallMsgStatus OBJECT-TYPE SYNTAX INTEGER { ok (1), warning (2), alarm (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Overall message status of device." ::= { cmcIIIMsgInfo 1 } cmcIIINumberOfMsgs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of messages. All status vars available in cmcIIIVarTable will cause a message in cmcIIIMsgTable." ::= { cmcIIIMsgInfo 2 } cmcIIILastChangeOverallMsgStatus OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of last status change according to operating time cmcIIIUnitUpTime." ::= { cmcIIIMsgInfo 3 } cmcIIILastChangeNumberOfMsgs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of last message number change according to operating time cmcIIIUnitUpTime." ::= { cmcIIIMsgInfo 4 } cmcIIILastChangeMsgSettings OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of last setting change according to operating time cmcIIIUnitUpTime This timestamp will be affected by SNMP settings only!" ::= { cmcIIIMsgInfo 5 } -- table with entry for each alarm available on this unit cmcIIIMsgTable OBJECT-TYPE SYNTAX SEQUENCE OF CmcIIIMsgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Headline of message table." ::= { cmcIIIMsgs 2 } cmcIIIMsgEntry OBJECT-TYPE SYNTAX CmcIIIMsgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of message table." INDEX { cmcIIIMsgDeviceIndex,cmcIIIMsgIndex } ::= { cmcIIIMsgTable 1 } CmcIIIMsgEntry ::= SEQUENCE { cmcIIIMsgDeviceIndex Unsigned32, cmcIIIMsgIndex Unsigned32, cmcIIIMsgText DisplayString, cmcIIIMsgStatus INTEGER, cmcIIIMsgRelay INTEGER, cmcIIIMsgBeeper INTEGER, cmcIIIMsgTrap BITS, cmcIIIMsgSMTP BITS, cmcIIIMsgSMS BITS, cmcIIIMsgQuit INTEGER, cmcIIIMsgDelay Unsigned32, cmcIIIMsgSchedAlarmOff Integer32, cmcIIIMsgQuality INTEGER, cmcIIIMsgVarIdx Integer32, cmcIIIMsgVarValueIdx Integer32, cmcIIIMsgStatusText DisplayString } cmcIIIMsgDeviceIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the device. Its value ranges between 1 and the value of cmcIIINumberOfDevs." ::= { cmcIIIMsgEntry 1 } cmcIIIMsgIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the list of message entries. Its value ranges between 1 and the value of cmcIIINumberOfMsgs." ::= { cmcIIIMsgEntry 2 } cmcIIIMsgText OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "Text for each message (entry in the table)." ::= { cmcIIIMsgEntry 3 } cmcIIIMsgStatus OBJECT-TYPE SYNTAX INTEGER { notAvail (1), configChanged (2), error (3), ok (4), alarm (5), highWarn (6), lowAlarm (7), highAlarm (8), lowWarn (9), setOff (10), setOn (11), open (12), closed (13), locked (14), unlRemote (15), doorOpen (16), service (17), standby (18), busy (19), noAccess (20), lost (21), detected (22), lowVoltage (23), probeopen (24), probeshort (25), calibration (26), inactive (27), active (28), noPower (29), readOnly (30), exchanged (31), valveOpen (32), warning (33), remote (34) } MAX-ACCESS read-only STATUS current DESCRIPTION "Actual message status 1: not available 2: configuration has changed (sensor new, changed, lost) 3: error 4: OK 5: alarm, e.g. smoke, vibration... 6: warning of analog value, value reached high warning threshold 7: analog value too low, value reached low threshold (Alarm) 8: analog value too high, value reached high threshold (Alarm) 9: warning of analog value, value reached low warning threshold 10: output is set to OFF 11: output is set to ON 12: door is open 13: door is closed 14: door is locked 15: door is unlocked by remote input, e.g. external card reader 16: door is unlocked by reader or keypad connected 17: door is unlocked by SNMP set command 18: door is unlocked by WEB 19: door is unlocked by timer 20: no access, wrong key code or card number 21: lost 22: detected 23: battery low, wireless sensor 24: sensor cable broken 25: sensor cable short 26: sensor calibration in progress 27: sensor is inactive 28: sensor is active 29: no Power (PSM) 30: read only (SD, USB-Stick) 31: control boards of LCP exchanged 32: valve open (info) 33: warning 34: remote control." ::= { cmcIIIMsgEntry 4 } cmcIIIMsgRelay OBJECT-TYPE SYNTAX INTEGER { disable (1), enable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setup of Alarm relay for this message/alarm 1: no switching of alarm relay 2: switching of alarm relay." DEFVAL { enable } ::= { cmcIIIMsgEntry 5 } cmcIIIMsgBeeper OBJECT-TYPE SYNTAX INTEGER { disable (1), enable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setup of Alarm beeper for this alarm 1: no audible alarm 2: audible alarm." DEFVAL { enable } ::= { cmcIIIMsgEntry 6 } cmcIIIMsgTrap OBJECT-TYPE SYNTAX BITS { receiver1 (0), receiver2 (1), receiver3 (2), receiver4 (3), receiver5 (4), receiver6 (5), receiver7 (6), receiver8 (7), receiver9 (8), receiver10 (9), receiver11 (10), receiver12 (11), receiver13 (12), receiver14 (13), receiver15 (14), receiver16 (15) } MAX-ACCESS read-write STATUS current DESCRIPTION "Each bit is representing an entry of cmcIIITrapReceiverTable. If the corresponding cmcIIITrapReceiverStatus is enabled setting this bit enables sending messages to this receiver." ::= { cmcIIIMsgEntry 7 } cmcIIIMsgSMTP OBJECT-TYPE SYNTAX BITS { receiver1 (0), receiver2 (1), receiver3 (2), receiver4 (3), receiver5 (4), receiver6 (5), receiver7 (6), receiver8 (7), receiver9 (8), receiver10 (9), receiver11 (10), receiver12 (11), receiver13 (12), receiver14 (13), receiver15 (14), receiver16 (15) } MAX-ACCESS read-write STATUS current DESCRIPTION "Each bit is representing an entry of cmcIIISmtpReceiverTable. If the corresponding cmcIIISmtpReceiverStatus is enabled setting this bit enables sending messages to this receiver." ::= { cmcIIIMsgEntry 8 } cmcIIIMsgSMS OBJECT-TYPE SYNTAX BITS { receiver1 (0), receiver2 (1), receiver3 (2), receiver4 (3), receiver5 (4), receiver6 (5), receiver7 (6), receiver8 (7), receiver9 (8), receiver10 (9), receiver11 (10), receiver12 (11), receiver13 (12), receiver14 (13), receiver15 (14), receiver16 (15) } MAX-ACCESS read-write STATUS current DESCRIPTION "Each bit is representing an entry of cmcIIISmsReceiverTable. If the corresponding cmcIIISmsReceiverStatus is enabled setting this bit enables sending messages to this receiver." ::= { cmcIIIMsgEntry 9 } cmcIIIMsgQuit OBJECT-TYPE SYNTAX INTEGER { auto (1), manual (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset of this alarm 1: auto 2: manual, alarm needs confirmation, e. g. with 'C' key." DEFVAL { auto } ::= { cmcIIIMsgEntry 10 } cmcIIIMsgDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Delay of alarm condition." ::= { cmcIIIMsgEntry 11 } cmcIIIMsgSchedAlarmOff OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Alarm condition disabled by scheduler." ::= { cmcIIIMsgEntry 12 } cmcIIIMsgQuality OBJECT-TYPE SYNTAX INTEGER { undefined (1), ok (2), warning (3), alarm (4), info (5), undefinedNoValue(21), okNoValue (22), warningNoValue (23), alarmNoValue (24), infoNoValue (25) } MAX-ACCESS read-only STATUS current DESCRIPTION "Quality of variable." ::= { cmcIIIMsgEntry 13 } cmcIIIMsgVarIdx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Index of variable 'Status' in variable table generating this message." ::= { cmcIIIMsgEntry 14 } cmcIIIMsgVarValueIdx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Index of variable 'Value' in the variable table." ::= { cmcIIIMsgEntry 15 } cmcIIIMsgStatusText OBJECT-TYPE SYNTAX DisplayString (SIZE (0..160)) MAX-ACCESS read-only STATUS current DESCRIPTION "Message status text." ::= { cmcIIIMsgEntry 16 } -- ============================================================================= -- cmcIIIDrcs: -- cmcIIIOverallDrcStatus OBJECT-TYPE SYNTAX INTEGER { ok (1), warning (2), alarm (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Overall DRC status of devices." ::= { cmcIIIDrcInfo 1 } cmcIIINumberOfDrcs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of DRCs available." ::= { cmcIIIDrcInfo 2 } cmcIIIOverallLastChangeDrcStatus OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Overall timestamp of last DRC change according to operating time cmcIIIUnitUpTime." ::= { cmcIIIDrcInfo 3 } cmcIIILastChangeNumberOfDrcs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Overall timestamp of last DRC number change according to operating time cmcIIIUnitUpTime." ::= { cmcIIIDrcInfo 4 } cmcIIIOverallDrcUtilization OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Percentage of occupied RUs." ::= { cmcIIIDrcInfo 5 } cmcIIIOverallDrcPower OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Power in Watts, calculated from all cmcIIITotalDrcPower -values." ::= { cmcIIIDrcInfo 6 } -- table with entry for each DRC available on this unit cmcIIIDrcTable OBJECT-TYPE SYNTAX SEQUENCE OF CmcIIIDrcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Headline of DRC table." ::= { cmcIIIDrcs 2 } cmcIIIDrcEntry OBJECT-TYPE SYNTAX CmcIIIDrcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of DRC table." INDEX { cmcIIIDrcIndex } ::= { cmcIIIDrcTable 1 } CmcIIIDrcEntry ::= SEQUENCE { cmcIIIDrcIndex Unsigned32, cmcIIIDrcStatus INTEGER, cmcIIILastChangeDrcStatus Unsigned32, cmcIIIDrcUnitName DisplayString, cmcIIIDrcLocation DisplayString, cmcIIIDrcBuilding DisplayString, cmcIIIDrcLevel DisplayString, cmcIIIDrcRoom DisplayString, cmcIIIDrcRow DisplayString, cmcIIIDrcRackNr DisplayString, cmcIIIDrcMfgDate DisplayString, cmcIIIDrcSerialNr Unsigned32, cmcIIIDrcOpHours Unsigned32, cmcIIIDrcNumberOfRU Unsigned32, cmcIIIDrcUtilization Unsigned32, cmcIIITotalDrcPower Unsigned32, cmcIIIDrcSwController DisplayString, cmcIIIDrcSwBootloader DisplayString, cmcIIIDrcFwController DisplayString, cmcIIIDrcSwAntenna DisplayString, cmcIIIDrcSwAntennaBL DisplayString, cmcIIIDrcCommand INTEGER } cmcIIIDrcIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the DRC. Its value ranges between 1 and the value of cmcIIINumberOfDrcs." ::= { cmcIIIDrcEntry 1 } cmcIIIDrcStatus OBJECT-TYPE SYNTAX INTEGER { notAvail (1), configChanged (2), error (3), ok (4), alarm (5), service (17), lost (21), detected (22) } MAX-ACCESS read-only STATUS current DESCRIPTION "DRC status of device." ::= { cmcIIIDrcEntry 2 } cmcIIILastChangeDrcStatus OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of last DRC change according to operating time cmcIIIUnitUpTime." ::= { cmcIIIDrcEntry 3 } cmcIIIDrcUnitName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..10)) MAX-ACCESS read-write STATUS current DESCRIPTION "Unit of Installation of DRC." ::= { cmcIIIDrcEntry 4 } cmcIIIDrcLocation OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Location of Installation of DRC." ::= { cmcIIIDrcEntry 5 } cmcIIIDrcBuilding OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Building of Installation of DRC." ::= { cmcIIIDrcEntry 6 } cmcIIIDrcLevel OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Level of Installation of DRC." ::= { cmcIIIDrcEntry 7 } cmcIIIDrcRoom OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Room of Installation of DRC." ::= { cmcIIIDrcEntry 8 } cmcIIIDrcRow OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "Row of Installation of DRC." ::= { cmcIIIDrcEntry 9 } cmcIIIDrcRackNr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) MAX-ACCESS read-write STATUS current DESCRIPTION "Rack number of Installation of DRC." ::= { cmcIIIDrcEntry 10 } cmcIIIDrcMfgDate OBJECT-TYPE SYNTAX DisplayString (SIZE(0..10)) MAX-ACCESS read-only STATUS current DESCRIPTION "Manufacture date of DRC, format DD.MM.YYYY." ::= { cmcIIIDrcEntry 11 } cmcIIIDrcSerialNr OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Serial number of DRC." ::= { cmcIIIDrcEntry 12 } cmcIIIDrcOpHours OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Operational hours of DRC." ::= { cmcIIIDrcEntry 13 } cmcIIIDrcNumberOfRU OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of RUs." ::= { cmcIIIDrcEntry 14 } cmcIIIDrcUtilization OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Percentage of occupied RUs." ::= { cmcIIIDrcEntry 15 } cmcIIITotalDrcPower OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Power in Watts, calculated from all cmcIIIDrcPower -values." ::= { cmcIIIDrcEntry 16 } cmcIIIDrcSwController OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Software version of controller." ::= { cmcIIIDrcEntry 17 } cmcIIIDrcSwBootloader OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Software version of controller bootloader." ::= { cmcIIIDrcEntry 18 } cmcIIIDrcFwController OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Firmware version of controller." ::= { cmcIIIDrcEntry 19 } cmcIIIDrcSwAntenna OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Software version of antenna module." ::= { cmcIIIDrcEntry 20 } cmcIIIDrcSwAntennaBL OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Software version of antenna modul bootloader." ::= { cmcIIIDrcEntry 21 } cmcIIIDrcCommand OBJECT-TYPE SYNTAX INTEGER { noQuit (1), quit (2), ledAuto (3), ledOnOccupied (4), ledOnFreeRU (5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Command (to) send to the DRC 1: no Quit command 2: Quit command 3: LED auto, LED will show status of TAG (detected, lost..) 4: LEDs of occupied RUs will be switched on 5: LEDs of free RUs will be switched on." DEFVAL { noQuit } ::= { cmcIIIDrcEntry 22 } -- table with entry for each DRC Tag available on this unit cmcIIITagTable OBJECT-TYPE SYNTAX SEQUENCE OF CmcIIITagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Headline of DRC Tag table." ::= { cmcIIIDrcs 3 } cmcIIITagEntry OBJECT-TYPE SYNTAX CmcIIITagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of tag table." INDEX { cmcIIITagDrcIndex,cmcIIITagRuIndex } ::= { cmcIIITagTable 1 } CmcIIITagEntry ::= SEQUENCE { cmcIIITagDrcIndex Unsigned32, cmcIIITagRuIndex Unsigned32, cmcIIITagStatus INTEGER, cmcIIITagUID DisplayString, cmcIIITagPosition Unsigned32, cmcIIITagUnitFormfactor Unsigned32, cmcIIITagOffset Unsigned32, cmcIIITagRuPosition Unsigned32, cmcIIITagDeviceClass INTEGER, cmcIIITagDescName DisplayString, cmcIIITagManufacturer DisplayString, cmcIIITagType DisplayString, cmcIIITagSerialNumber DisplayString, cmcIIITagVendor DisplayString, cmcIIITagMac1 DisplayString, cmcIIITagMac2 DisplayString, cmcIIITagService DisplayString, cmcIIITagDeviceName DisplayString, cmcIIITagInventoryCode DisplayString, cmcIIITagPower Unsigned32, cmcIIITagCurrent Unsigned32, cmcIIITagVoltage Unsigned32, cmcIIITagLastService DisplayString, cmcIIITagNextService DisplayString, cmcIIITagLastUpdate DisplayString, cmcIIITagNextUpdate DisplayString, cmcIIITagInitialStart DisplayString, cmcIIITagCustom DisplayString, cmcIIITagCommand INTEGER, cmcIIITagStart Unsigned32, cmcIIITagEnd Unsigned32, cmcIIITagAntennaMap Unsigned32 } cmcIIITagDrcIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the DRC. Its value ranges between 1 and the value of cmcIIINumberOfDrcs." ::= { cmcIIITagEntry 1 } cmcIIITagRuIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the RU of this DRC. This is the RU for this tag." ::= { cmcIIITagEntry 2 } cmcIIITagStatus OBJECT-TYPE SYNTAX INTEGER { notAvail (1), configChanged (2), error (3), ok (4), alarm (5), service (17), lost (21), detected (22) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the unit at this RU." ::= { cmcIIITagEntry 3 } cmcIIITagUID OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "UID of the tag of the unit mounted at this position (RU)." ::= { cmcIIITagEntry 4 } cmcIIITagPosition OBJECT-TYPE SYNTAX Unsigned32 (0..9999) MAX-ACCESS read-only STATUS current DESCRIPTION "Tag position within this RU, 0,1 or 2. 0: topmost position 1: middle position 2: lowermost position." ::= { cmcIIITagEntry 5 } cmcIIITagUnitFormfactor OBJECT-TYPE SYNTAX Unsigned32 (0..9999) MAX-ACCESS read-write STATUS current DESCRIPTION "Formfactor of the chassis (number of RUs)." ::= { cmcIIITagEntry 6 } cmcIIITagOffset OBJECT-TYPE SYNTAX Unsigned32 (0..9999) MAX-ACCESS read-write STATUS current DESCRIPTION "Tag offset. Offset of the tag related to the topmost position (in one-third of a RU)." ::= { cmcIIITagEntry 7 } cmcIIITagRuPosition OBJECT-TYPE SYNTAX Unsigned32 (0..9999) MAX-ACCESS read-only STATUS current DESCRIPTION "Position (RU) of the chassis." ::= { cmcIIITagEntry 8 } cmcIIITagDeviceClass OBJECT-TYPE SYNTAX INTEGER { notDefined (1), blankingPlate (2), componentShelf (3), cableRouting (4), patchPanelCatX (5), patchPanelFibreOptic(6), ups (7), powerSupply (8), kvm (9), switch (10), monitorKeyboardDrawer(11), monitor (12), server (13), storage (14) } MAX-ACCESS read-write STATUS current DESCRIPTION "Class of the device." DEFVAL { notDefined } ::= { cmcIIITagEntry 9 } cmcIIITagDescName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Description name of the unit at this RU." ::= { cmcIIITagEntry 10 } cmcIIITagManufacturer OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "Manufacturer of the unit at this RU." ::= { cmcIIITagEntry 11 } cmcIIITagType OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "Type Name of the unit at this RU." ::= { cmcIIITagEntry 12 } cmcIIITagSerialNumber OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "Serial number of the Unit at this RU." ::= { cmcIIITagEntry 13 } cmcIIITagVendor OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "Vendor of the unit at this RU." ::= { cmcIIITagEntry 14 } cmcIIITagMac1 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..17)) MAX-ACCESS read-write STATUS current DESCRIPTION "MAC address 1 of the Unit at this RU." ::= { cmcIIITagEntry 15 } cmcIIITagMac2 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..17)) MAX-ACCESS read-write STATUS current DESCRIPTION "MAC address 2 of the unit at this RU." ::= { cmcIIITagEntry 16 } cmcIIITagService OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Vendor contact of the unit at this RU." ::= { cmcIIITagEntry 17 } cmcIIITagDeviceName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Name of Unit at this RU." ::= { cmcIIITagEntry 18 } cmcIIITagInventoryCode OBJECT-TYPE SYNTAX DisplayString (SIZE(0..200)) MAX-ACCESS read-write STATUS current DESCRIPTION "Inventory code of the unit at this RU." ::= { cmcIIITagEntry 19 } cmcIIITagPower OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Power in Watts of the unit at this RU." ::= { cmcIIITagEntry 20 } cmcIIITagCurrent OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Current in Amperes*10 of the unit at this RU." ::= { cmcIIITagEntry 21 } cmcIIITagVoltage OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Voltage in Volts of the unit at this RU." ::= { cmcIIITagEntry 22 } cmcIIITagLastService OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "Last service of the unit at this RU." ::= { cmcIIITagEntry 23 } cmcIIITagNextService OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "Next service of the Unit at this RU." ::= { cmcIIITagEntry 24 } cmcIIITagLastUpdate OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Last update of the unit at this RU." ::= { cmcIIITagEntry 25 } cmcIIITagNextUpdate OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Next update of the unit at this RU." ::= { cmcIIITagEntry 26 } cmcIIITagInitialStart OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) MAX-ACCESS read-write STATUS current DESCRIPTION "Initial start (YYYYMMDD) of the unit at this RU." ::= { cmcIIITagEntry 27 } cmcIIITagCustom OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "Custom field of the unit at this RU." ::= { cmcIIITagEntry 28 } cmcIIITagCommand OBJECT-TYPE SYNTAX INTEGER { noQuit (1), quit (2), ledAuto (3), ledOn (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Command (to) send to the unit at this RU." DEFVAL { noQuit } ::= { cmcIIITagEntry 29 } cmcIIITagStart OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Start position (bottom) of the chassis of this tag. The resolution is one-third of a RU." ::= { cmcIIITagEntry 30 } cmcIIITagEnd OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "End position (top) of the chassis of this tag. The resolution is one-third of a RU." ::= { cmcIIITagEntry 31 } cmcIIITagAntennaMap OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Tag position mapping to the antennas. The resolution is one-third of a RU, one RU has three antennas. Position 1 is at the bottom of the rack. This value ranges from 1 to cmcIIIDrcNumberOfRU*3." ::= { cmcIIITagEntry 32 } -- ============================================================================= -- cmcIIIFiles: -- cmcIIINumberOfFiles OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Files available." ::= { cmcIIIFileInfo 1 } cmcIIILastChangeFiles OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Overall timestamp of last file change according to operating time cmcIIIUnitUpTime." ::= { cmcIIIFileInfo 2 } cmcIIILastChangeNumberOfFiles OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Overall timestamp of last file number change according to operating time cmcIIIUnitUpTime." ::= { cmcIIIFileInfo 3 } -- table with entry for each file available on this unit cmcIIIFileTable OBJECT-TYPE SYNTAX SEQUENCE OF CmcIIIFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Headline of file table." ::= { cmcIIIFiles 2 } cmcIIIFileEntry OBJECT-TYPE SYNTAX CmcIIIFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of file table." INDEX { cmcIIIFileIndex } ::= { cmcIIIFileTable 1 } CmcIIIFileEntry ::= SEQUENCE { cmcIIIFileIndex Unsigned32, cmcIIILastChangeFile Unsigned32, cmcIIIFileSize Unsigned32, cmcIIIFileChecksum Unsigned32, cmcIIIFileName DisplayString } cmcIIIFileIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the file. Its value ranges between 1 and the value of cmcIIINumberOfFiles." ::= { cmcIIIFileEntry 1 } cmcIIILastChangeFile OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of last file change according to operating time cmcIIIUnitUpTime." ::= { cmcIIIFileEntry 2 } cmcIIIFileSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Size of the file in bytes." ::= { cmcIIIFileEntry 3 } cmcIIIFileChecksum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Checksum of the file." ::= { cmcIIIFileEntry 4 } cmcIIIFileName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the file." ::= { cmcIIIFileEntry 5 } -- ============================================================================= -- cmcIIIControl: -- cmcIIIQuitUnit OBJECT-TYPE SYNTAX INTEGER { noQuit (1), quit (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Command to quit (acknowledge) alarms of CMCIII unit. Setting to 'quit' (2) will have same result as pressing 'C' on CMCIII. Variable is automatically set back to 'noQuit' (1)." DEFVAL { noQuit } ::= { cmcIIIControl 1 } cmcIIISmsQueue OBJECT-TYPE SYNTAX DisplayString (SIZE (0..180)) MAX-ACCESS read-write STATUS current DESCRIPTION "Fast track to send a SMS message based on configuration of cmcIIISetupSMS. Message format: MessageText TabulatorAsSeparator ReceiverPhoneNumber e.g.: Hello World!\t0123456789" ::= { cmcIIIControl 2 } -- ***************************************************************************** -- Traps and Notifications: -- alarmSensorDevice NOTIFICATION-TYPE OBJECTS { cmcIIIDevName, cmcIIIMsgText, cmcIIIMsgStatus, cmcIIIMsgStatusText } STATUS current DESCRIPTION "Alarm of sensors of device." -- -- #CATEGORY "Status Events." -- #TYPE "Sensor unit alarm." -- #SUMMARY "Device: %s, Message %s, Status: %s, Text: %s." -- #ARGUMENTS {0,1,2,3} -- #SEVERITY MAJOR -- #TIMEINDEX 6 -- #STATE OPERATIONAL -- ::= { cmcIIINotifications 1 } alarmDevice NOTIFICATION-TYPE OBJECTS { cmcIIIDevName, cmcIIIDevAlias, cmcIIIDevStatus, cmcIIIDevStatusText } STATUS current DESCRIPTION "Alarm of device." -- -- #CATEGORY "Status Events." -- #TYPE "Device alarm." -- #SUMMARY "Device: %s, Alias %s, Status: %s, Text: %s." -- #ARGUMENTS {0,1,2,3} -- #SEVERITY MAJOR -- #TIMEINDEX 6 -- #STATE OPERATIONAL -- ::= { cmcIIINotifications 2 } reConfigAgent NOTIFICATION-TYPE OBJECTS { sysObjectID } STATUS current DESCRIPTION "Agent reconfiguration." -- -- #CATEGORY "Status Events." -- #TYPE "Agent status." -- #SUMMARY "Agent type: %s, Status: configuration has changed." -- #ARGUMENTS {0} -- #SEVERITY INFORMATIONAL -- #TIMEINDEX 6 -- #STATE OPERATIONAL -- ::= { cmcIIINotifications 3 } shutdownAgent NOTIFICATION-TYPE OBJECTS { sysObjectID } STATUS current DESCRIPTION "Agent shutdown." -- -- #CATEGORY "Status Events." -- #TYPE "Agent status." -- #SUMMARY "Agent type: %s, Status: shutdown." -- #ARGUMENTS {0} -- #SEVERITY SEVERE -- #TIMEINDEX 6 -- #STATE NONOPERATIONAL -- ::= { cmcIIINotifications 4 } -- ***************************************************************************** -- Compliance Statements -- cmcIIIMibCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The core compliance statement for all cmcIII implementations." MODULE MANDATORY-GROUPS { cmcIIITrapGroup, cmcIIINotificationGroup, cmcIIIInfoMibGroup, cmcIIISetupMibGroup, cmcIIIDeviceMibGroup } GROUP cmcIIITrapGroup DESCRIPTION "trap handling." GROUP cmcIIINotificationGroup DESCRIPTION "notification handling." GROUP cmcIIIInfoMibGroup DESCRIPTION "base information handling." GROUP cmcIIISetupMibGroup DESCRIPTION "setup handling." GROUP cmcIIIDeviceMibGroup DESCRIPTION "device handling." GROUP cmcIIIDrcMibGroup DESCRIPTION "DRC handling." GROUP cmcIIIFileMibGroup DESCRIPTION "File handling." GROUP cmcIIIControlMibGroup DESCRIPTION "device control." GROUP cmcIIIRelayMibGroup DESCRIPTION "relay handling." GROUP cmcIIISmsMibGroup DESCRIPTION "SMS handling." GROUP cmcIIISmtpMibGroup DESCRIPTION "SMTP handling." GROUP cmcIIISyslogMibGroup DESCRIPTION "syslog handling." GROUP cmcIIITimerMibGroup DESCRIPTION "timer handling." GROUP cmcIIILdapMibGroup DESCRIPTION "LDAP handling." GROUP cmcIIINtpMibGroup DESCRIPTION "NTP handling." GROUP cmcIIIShutdownMibGroup DESCRIPTION "Shutdown server handling." GROUP cmcIIIModbusMibGroup DESCRIPTION "Modbus access handling." GROUP cmcIIIRadiusMibGroup DESCRIPTION "Radius handling." GROUP cmcIIIWebCamMibGroup DESCRIPTION "WebCam handling." ::= { cmcIIIMibCompliances 1 } -- ***************************************************************************** -- Conformance Groups -- cmcIIITrapGroup OBJECT-GROUP OBJECTS { cmcIIIDevName, cmcIIIDevAlias, cmcIIIDevStatus, cmcIIIDevStatusText, cmcIIIMsgText, cmcIIIMsgStatus, cmcIIIMsgStatusText } STATUS current DESCRIPTION "Conformance group for objects contained in cmcIII notifications." ::= { cmcIIIMibGroups 1 } cmcIIINotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { alarmSensorDevice, alarmDevice, reConfigAgent, shutdownAgent } STATUS current DESCRIPTION "The cmcIII MIB notification group." ::= { cmcIIIMibGroups 2 } cmcIIIInfoMibGroup OBJECT-GROUP OBJECTS { cmcIIIMibMajRev, cmcIIIMibMinRev, cmcIIIAgentRev, cmcIIICapabilityRev, cmcIIIUnitStatus, cmcIIIUnitURL, cmcIIIUnitHWRev, cmcIIIUnitFWRev, cmcIIIUnitOSRev, cmcIIIUnitSerial, cmcIIIUnitProd, cmcIIIUnitType, cmcIIIUnitCurrentSource, cmcIIICan0CurrentConsumption, cmcIIICan1CurrentConsumption, cmcIIIUnitUpTime, cmcIIIUnitMode, cmcIIIUnitLoadAverage } STATUS current DESCRIPTION "Conformance group for all cmcIII base information." ::= { cmcIIIMibGroups 3 } cmcIIISetupMibGroup OBJECT-GROUP OBJECTS { cmcIIILastChangeSetup, cmcIIISetTempUnit, cmcIIITimeZone, cmcIIISetupDate, cmcIIISetupTime, cmcIIIWebAccess, cmcIIIHttpPort, cmcIIIHttpsPort, cmcIIIFtpAccess, cmcIIIFtpPort, cmcIIISshAccess, cmcIIISshPort, cmcIIITelnetAccess, cmcIIITelnetPort, cmcIIILanguage, cmcIIIOpcUaAccess, cmcIIIOpcUaPort, cmcIIINumberOfTrapReceivers, cmcIIITrapReceiverStatus, cmcIIITrapReceiverIpAddress } STATUS current DESCRIPTION "Conformance group for default cmcIII setup operations." ::= { cmcIIIMibGroups 4 } cmcIIIDeviceMibGroup OBJECT-GROUP OBJECTS { cmcIIIOverallDevStatus, cmcIIINumberOfDevs, cmcIIILastChangeOverallDevStatus, cmcIIILastChangeNumberOfDevs, cmcIIILastChangeDevSettings, cmcIIILastChangeDevs, cmcIIIDevName, cmcIIIDevAlias, cmcIIIDevType, cmcIIIDevNodeID, cmcIIIDevStatus, cmcIIIDevArtNr, cmcIIIDevLocation, cmcIIIDevBus, cmcIIIDevPos, cmcIIIDevFW, cmcIIIDevHW, cmcIIIDevSerial, cmcIIIDevProductWeek, cmcIIIDevLastChange, cmcIIIDevURL, cmcIIIDevNumberOfVars, cmcIIIDevNumberOfMsgs, cmcIIIDevStatusText, cmcIIIDevCurrentMinConsumption, cmcIIIDevCurrentMaxConsumption, cmcIIIDevEntPhysicalIndex, cmcIIIDevAssembly, cmcIIINumberOfVars, cmcIIILastChangeNumberOfVars, cmcIIILastChangeVarSettings, cmcIIILastChangeVars, cmcIIIVarByQualityHide, cmcIIIDynUpdateRate, cmcIIIDynUpdateHistory, cmcIIIVarName, cmcIIIVarType, cmcIIIVarUnit, cmcIIIVarDataType, cmcIIIVarScale, cmcIIIVarConstraints, cmcIIIVarSteps, cmcIIIVarValueStr, cmcIIIVarValueInt, cmcIIIVarAccess, cmcIIIVarLastChange, cmcIIIVarQuality, cmcIIIVarEntPhysicalIndex, cmcIIIVarByTypeValueStr, cmcIIIVarByTypeValueInt, cmcIIIVarByTypeLastChange, cmcIIIVarByQualityValueStr, cmcIIIVarByQualityValueInt, cmcIIIVarByQualityLastChange, cmcIIIVarIntDynValue, cmcIIIVarStrDynValue, cmcIIIOverallMsgStatus, cmcIIINumberOfMsgs, cmcIIILastChangeOverallMsgStatus, cmcIIILastChangeNumberOfMsgs, cmcIIILastChangeMsgSettings, cmcIIIMsgText, cmcIIIMsgStatus, cmcIIIMsgTrap, cmcIIIMsgSMTP, cmcIIIMsgQuit, cmcIIIMsgDelay, cmcIIIMsgSchedAlarmOff, cmcIIIMsgQuality, cmcIIIMsgVarIdx, cmcIIIMsgVarValueIdx, cmcIIIMsgStatusText } STATUS current DESCRIPTION "Conformance group for all cmcIII device information." ::= { cmcIIIMibGroups 5 } cmcIIIControlMibGroup OBJECT-GROUP OBJECTS { cmcIIIQuitUnit } STATUS current DESCRIPTION "Conformance group for all cmcIII control operations." ::= { cmcIIIMibGroups 6 } cmcIIIRelayMibGroup OBJECT-GROUP OBJECTS { cmcIIISetBeeper, cmcIIIQuitRelay, cmcIIILogicRelay, cmcIIIUnitMsgRelay, cmcIIIFunctionRelay, cmcIIIMsgRelay, cmcIIIMsgBeeper } STATUS current DESCRIPTION "Conformance group for cmcIII relay and beeper operations." ::= { cmcIIIMibGroups 7 } cmcIIISmsMibGroup OBJECT-GROUP OBJECTS { cmcIIISmsStatus, cmcIIISmsPIN, cmcIIISmsService, cmcIIISmsMSN, cmcIIISmsPreDial, cmcIIINumberOfSmsReceivers, cmcIIISmsReceiverStatus, cmcIIISmsReceiverNumber, cmcIIIMsgSMS, cmcIIISmsQueue } STATUS current DESCRIPTION "Conformance group for cmcIII SMS operations." ::= { cmcIIIMibGroups 8 } cmcIIISmtpMibGroup OBJECT-GROUP OBJECTS { cmcIIISmtpStatus, cmcIIISmtpServer, cmcIIISmtpPort, cmcIIISmtpAuth, cmcIIISmtpUsername, cmcIIISmtpPassword, cmcIIISmtpSender, cmcIIISmtpReply, cmcIIINumberOfSmtpReceivers, cmcIIISmtpReceiverStatus, cmcIIISmtpReceiverAddress } STATUS current DESCRIPTION "Conformance group for cmcIII SMTP operations." ::= { cmcIIIMibGroups 9 } cmcIIISyslogMibGroup OBJECT-GROUP OBJECTS { cmcIIISysLogStatus, cmcIIISysLogFacility, cmcIIISysLogServer1, cmcIIISysLogServer2 } STATUS current DESCRIPTION "Conformance group for cmcIII syslog operations." ::= { cmcIIIMibGroups 10 } cmcIIITimerMibGroup OBJECT-GROUP OBJECTS { cmcIIINumberOfTimers, cmcIIITimerStatus, cmcIIITimerDayOfWeek, cmcIIITimeOn, cmcIIITimeOff, cmcIIITimeControl, cmcIIITimerFunction } STATUS current DESCRIPTION "Conformance group for cmcIII timer operations." ::= { cmcIIIMibGroups 11 } cmcIIILdapMibGroup OBJECT-GROUP OBJECTS { cmcIIILdapStatus, cmcIIILdapServer, cmcIIILdapBindDN, cmcIIILdapBindPW, cmcIIILdapUserBase, cmcIIILdapUserSearch, cmcIIILdapUserAttrib, cmcIIILdapGroupBase, cmcIIILdapGroupSearch, cmcIIILdapGroupAttrib } STATUS current DESCRIPTION "Conformance group for cmcIII LDAP operations." ::= { cmcIIIMibGroups 12 } cmcIIINtpMibGroup OBJECT-GROUP OBJECTS { cmcIIINtpStatus, cmcIIINtpTimeZone, cmcIIINtpServer1, cmcIIINtpServer2 } STATUS current DESCRIPTION "Conformance group for cmcIII NTP operations." ::= { cmcIIIMibGroups 13 } cmcIIIShutdownMibGroup OBJECT-GROUP OBJECTS { cmcIIINumberOfShutdowns, cmcIIIShutdownServer, cmcIIIShutdownName, cmcIIIShutdownPort, cmcIIIShutdownDelay, cmcIIIShutdownEnabled } STATUS current DESCRIPTION "Conformance group for cmcIII shutdown server operations." ::= { cmcIIIMibGroups 14 } cmcIIIModbusMibGroup OBJECT-GROUP OBJECTS { cmcIIIModbusStatus, cmcIIIModbusPort, cmcIIINumberOfModbusSources, cmcIIIModbusAccess, cmcIIIModbusSource } STATUS current DESCRIPTION "Conformance group for cmcIII modbus operations." ::= { cmcIIIMibGroups 15 } cmcIIIDrcMibGroup OBJECT-GROUP OBJECTS { cmcIIIOverallDrcStatus, cmcIIINumberOfDrcs, cmcIIIOverallLastChangeDrcStatus, cmcIIILastChangeNumberOfDrcs, cmcIIIOverallDrcUtilization, cmcIIIOverallDrcPower, cmcIIIDrcStatus, cmcIIILastChangeDrcStatus, cmcIIIDrcUnitName, cmcIIIDrcLocation, cmcIIIDrcBuilding, cmcIIIDrcLevel, cmcIIIDrcRoom, cmcIIIDrcRow, cmcIIIDrcRackNr, cmcIIIDrcMfgDate, cmcIIIDrcSerialNr, cmcIIIDrcOpHours, cmcIIIDrcNumberOfRU, cmcIIIDrcUtilization, cmcIIITotalDrcPower, cmcIIIDrcSwController, cmcIIIDrcSwBootloader, cmcIIIDrcFwController, cmcIIIDrcSwAntenna, cmcIIIDrcSwAntennaBL, cmcIIIDrcCommand, cmcIIITagStatus, cmcIIITagUID, cmcIIITagPosition, cmcIIITagUnitFormfactor, cmcIIITagOffset, cmcIIITagRuPosition, cmcIIITagDeviceClass, cmcIIITagDescName, cmcIIITagManufacturer, cmcIIITagType, cmcIIITagSerialNumber, cmcIIITagVendor, cmcIIITagMac1, cmcIIITagMac2, cmcIIITagService, cmcIIITagDeviceName, cmcIIITagInventoryCode, cmcIIITagPower, cmcIIITagCurrent, cmcIIITagVoltage, cmcIIITagLastService, cmcIIITagNextService, cmcIIITagLastUpdate, cmcIIITagNextUpdate, cmcIIITagInitialStart, cmcIIITagCustom, cmcIIITagCommand, cmcIIITagStart, cmcIIITagEnd, cmcIIITagAntennaMap } STATUS current DESCRIPTION "Conformance group for cmcIII Drc operations." ::= { cmcIIIMibGroups 16 } cmcIIIFileMibGroup OBJECT-GROUP OBJECTS { cmcIIINumberOfFiles, cmcIIILastChangeFiles, cmcIIILastChangeNumberOfFiles, cmcIIILastChangeFile, cmcIIIFileSize, cmcIIIFileChecksum, cmcIIIFileName } STATUS current DESCRIPTION "Conformance group for cmcIII files." ::= { cmcIIIMibGroups 17 } cmcIIIRadiusMibGroup OBJECT-GROUP OBJECTS { cmcIIIRadiusStatus, cmcIIIRadiusServer, cmcIIIRadiusPort, cmcIIIRadiusPassword, cmcIIIRadiusGroupMode, cmcIIIRadiusGroupId, cmcIIIRadiusAuth } STATUS current DESCRIPTION "Conformance group for cmcIII Radius operations." ::= { cmcIIIMibGroups 18 } cmcIIIWebCamMibGroup OBJECT-GROUP OBJECTS { cmcIIIWebCamStatus, cmcIIIWebCamServer, cmcIIIWebCamUsername, cmcIIIWebCamPassword, cmcIIIWebCamIntervall, cmcIIIWebCamNumberofImages, cmcIIIWebCamDestination } STATUS current DESCRIPTION "Conformance group for cmcIII WebCam operations." ::= { cmcIIIMibGroups 19 } -- ***************************************************************************** -- Capabilities -- -- please refer to RITTAL-CMCIII-CAPABILITY-MIB definitions -- -- ***************************************************************************** END