SAF-INTEGRAE-MIB DEFINITIONS ::= BEGIN -- Definitions for include by other SAF Tehnika mib modules IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Gauge32, Counter64, TimeTicks FROM SNMPv2-SMI -- [RFC2578] pointToPoint FROM SAF-ENTERPRISE DateAndTime, TEXTUAL-CONVENTION FROM SNMPv2-TC DisplayString, PhysAddress FROM RFC1213-MIB safIntegra FROM SAF-INTEGRA-MIB OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF -- [RFC2580] IpAddress FROM SNMPv2-SMI -- [RFC2578] IANAifType FROM IANAifType-MIB; -- saf OBJECT IDENTIFIER ::= { enterprises 7571 } -- microwaveRadio OBJECT IDENTIFIER ::= { tehnika 1 } -- pointToPoint OBJECT IDENTIFIER ::= { microwaveRadio 1 } -- safIntegra OBJECT IDENTIFIER ::= { pointToPoint 7 } integraE MODULE-IDENTITY LAST-UPDATED "202004250000Z" -- 25 apr 2020 ORGANIZATION "SAF Tehnika" CONTACT-INFO "SAF Tehnika technical support " DESCRIPTION "SAF Integra-E device management base" -- Revision history REVISION "202004250000Z" -- 25 apr 2020 DESCRIPTION "ACMB min/max modem modulation read-only support" REVISION "202004220000Z" -- 22 apr 2020 DESCRIPTION "ATPC read-only support" REVISION "202001140000Z" -- 14 jan 2020 DESCRIPTION "Added LSP/Backup port status." REVISION "201911210000Z" -- 21 nov 2019 DESCRIPTION "Added system service sensors." REVISION "201906110000Z" -- 11 jun 2019 DESCRIPTION "Added device fan error status." REVISION "201904230000Z" -- 23 apr 2019 DESCRIPTION "Added device type, serial number and product code." REVISION "201903120000Z" -- 12 mar 2019 DESCRIPTION "Changed integraEifPortSpeed to integraEifPortHighSpeed, that will use Mbps instead of bps." REVISION "201902040000Z" -- 04 feb 2019 DESCRIPTION "FEC load parameter type changed to Integer32" REVISION "201811150000Z" -- 15 nov 2018 DESCRIPTION "FEC locked modem parameter added" REVISION "201811140000Z" -- 14 nov 2018 DESCRIPTION "Public Release 1.0" ::= { safIntegra 9 } FixedDiv20 ::= TEXTUAL-CONVENTION DISPLAY-HINT "d-2" STATUS current DESCRIPTION "Fixed point, two decimals" SYNTAX Integer32 FixedDiv10 ::= TEXTUAL-CONVENTION DISPLAY-HINT "d-1" STATUS current DESCRIPTION "Fixed point, two decimals" SYNTAX Integer32 integraEtimestamp OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Last data update time" ::= { integraE 1 } integraEradio OBJECT IDENTIFIER ::= { integraE 2 } integraEradioTxPower OBJECT-TYPE SYNTAX Integer32 UNITS "dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "Output power of radio transmitter" ::= { integraEradio 1 } integraEradioTxFrequency OBJECT-TYPE SYNTAX Integer32 UNITS "kHz" MAX-ACCESS read-write STATUS current DESCRIPTION "Frequency of radio transmitter" ::= { integraEradio 2 } integraEradioRxLevel OBJECT-TYPE SYNTAX Integer32 UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Level of the received signal" ::= { integraEradio 3 } integraEradioSide OBJECT-TYPE SYNTAX INTEGER { high(1), low(2), error(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Radio side: Low/High" ::= { integraEradio 4 } integraEradioTxMute OBJECT-TYPE SYNTAX INTEGER { on(1), off(2), error(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of 'Tx mute' 1 - Tx is muted, 2 - Tx is not muted. 3 - Status information unavailable" ::= { integraEradio 5 } integraEradioDuplexShift OBJECT-TYPE SYNTAX Integer32 UNITS "kHz" MAX-ACCESS read-only STATUS current DESCRIPTION "Utilized duplex shift in kHz" ::= { integraEradio 6 } integraEradioRxFrequency OBJECT-TYPE SYNTAX Integer32 UNITS "kHz" MAX-ACCESS read-only STATUS current DESCRIPTION "Frequency of radio receiver" ::= { integraEradio 7 } integraEradioTemperature OBJECT-TYPE SYNTAX FixedDiv10 UNITS "C" MAX-ACCESS read-only STATUS current DESCRIPTION "Radio module temperature" ::= { integraEradio 8 } integraEradioTxMuteDuration OBJECT-TYPE SYNTAX Integer32(0..214748364) UNITS "s" MAX-ACCESS read-write STATUS current DESCRIPTION "Time remaning for Tx to be muted in seconds. To turn mute on send number of seconds between 10 and MAX. To turn mute off send 0. GET will retrieve remaining duration for mute or 0 if Tx mute is turned off." ::= { integraEradio 9 } --Settable radio parameter range values integraEradioRangesTable OBJECT-TYPE SYNTAX SEQUENCE OF IntegraEradioRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Network interface port status data." ::= { integraEradio 10 } integraEradioRangeEntry OBJECT-TYPE SYNTAX IntegraEradioRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing network physical port status info." INDEX { integraEradioRangeEntryIndex } ::= { integraEradioRangesTable 1 } IntegraEradioRangeEntry ::= SEQUENCE { integraEradioRangeEntryIndex Integer32, integraEradioRangeDescr DisplayString, integraEradioRangeTxPower Integer32, integraEradioRangeTxFrequency Integer32 } integraEradioRangeEntryIndex OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value, greater than zero, for each range entry. Starts with 1 and is equal to a number of all range parameters." ::= { integraEradioRangeEntry 1 } integraEradioRangeDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "'Minimal' and 'maximal' labels" ::= { integraEradioRangeEntry 2 } integraEradioRangeTxPower OBJECT-TYPE SYNTAX Integer32 UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Output power ranges for radio transmitter" ::= { integraEradioRangeEntry 3 } integraEradioRangeTxFrequency OBJECT-TYPE SYNTAX Integer32 UNITS "kHz" MAX-ACCESS read-only STATUS current DESCRIPTION "Frequency ranges for radio transmitter" ::= { integraEradioRangeEntry 4 } integraEradioPLL OBJECT-TYPE SYNTAX INTEGER { error(1), ok(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "PLL state of local-oscillator generator" ::= { integraEradio 11 } integraEradioRxLevelState OBJECT-TYPE SYNTAX INTEGER { ok(1), low(2), high(3), error(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Received signal level state" ::= { integraEradio 12 } integraEradioAtpcState OBJECT-TYPE SYNTAX INTEGER { off(1), on(2), unknown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "ATPC state" ::= { integraEradio 13 } integraEradioAtpcUpdatePeriod OBJECT-TYPE SYNTAX Integer32(0..214748364) UNITS "s" MAX-ACCESS read-only STATUS current DESCRIPTION "ATPC update period" ::= { integraEradio 14 } integraEradioAtpcRxLevelMin OBJECT-TYPE SYNTAX Integer32 UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "ATPC Minimal level of the received signal" ::= { integraEradio 15 } integraEradioAtpcRxLevelMax OBJECT-TYPE SYNTAX Integer32 UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "ATPC Maximal level of the received signal" ::= { integraEradio 16 } integraEmodem OBJECT IDENTIFIER ::= { integraE 3 } integraEmodemAcquireStatus OBJECT-TYPE SYNTAX INTEGER { acquireInProgress(1), acquireLocked(2), acquireFailed(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is the current status of modem data acquire when queried modem status. For detailed info use modemAcquireLastStatusDetails." ::= { integraEmodem 1 } integraEmodemNormalizedMse OBJECT-TYPE SYNTAX FixedDiv10 UNITS "dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Current normalized MSE value" ::= { integraEmodem 2 } -- ldpcDecoderStress OBJECT-TYPE integraEmodemFECload OBJECT-TYPE SYNTAX FixedDiv10 UNITS "dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Decoder stress or FEC load value" ::= { integraEmodem 3 } integraEmodemFEClocked OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2), unknown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "FEC locked status" ::= { integraEmodem 4 } integraEmodemAcquireLastStatusDetails OBJECT-TYPE SYNTAX INTEGER { acquireLocked(1), acquireSweep(4), acquireMSEerror(5), acquireBITerror(6), acquireStopped(12), acquireSMerror(13) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is the last status of successfull or unsuccessful modem data acquire" ::= { integraEmodem 5 } integraEmodemTemperature OBJECT-TYPE SYNTAX FixedDiv10 UNITS "C" MAX-ACCESS read-only STATUS current DESCRIPTION "Modem DSP temperature" ::= { integraEmodem 6 } integraEmodemBandwidth OBJECT-TYPE SYNTAX Integer32 UNITS "kHz" MAX-ACCESS read-only STATUS current DESCRIPTION "Signal bandwidth" ::= { integraEmodem 7 } integraEmodemModulation OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Modulation (preferred)" ::= { integraEmodem 8 } integraEmodemRxModulation OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current (actual) Rx Modulation" ::= { integraEmodem 9 } integraEmodemTxModulation OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current (actual) Tx Modulation" ::= { integraEmodem 10 } integraEmodemRxCapacity OBJECT-TYPE SYNTAX Integer32 UNITS "kb/s" MAX-ACCESS read-only STATUS current DESCRIPTION "Rx ethernet capacity in kilobits per second" ::= { integraEmodem 11 } integraEmodemTxCapacity OBJECT-TYPE SYNTAX Integer32 UNITS "kb/s" MAX-ACCESS read-only STATUS current DESCRIPTION "Tx ethernet capacity in kilobits per second" ::= { integraEmodem 12 } integraEmodemACMBengine OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), error(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "ACMB engine status" ::= { integraEmodem 13 } integraEmodemCarrierOffset OBJECT-TYPE SYNTAX Integer32 UNITS "Hz" MAX-ACCESS read-only STATUS current DESCRIPTION "Modem carrier offset" ::= { integraEmodem 14 } integraEmodemCountTime OBJECT-TYPE SYNTAX Counter64 UNITS "s" MAX-ACCESS read-only STATUS current DESCRIPTION "Modem performance count time" ::= { integraEmodem 15 } integraEmodemErroredBlock OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Modem performance errored blocks" ::= { integraEmodem 16 } integraEmodemErroredSecond OBJECT-TYPE SYNTAX Counter64 UNITS "s" MAX-ACCESS read-only STATUS current DESCRIPTION "Modem performance errored seconds" ::= { integraEmodem 17 } integraEmodemSeverelyErroredSecond OBJECT-TYPE SYNTAX Counter64 UNITS "s" MAX-ACCESS read-only STATUS current DESCRIPTION "Modem performance severely errored seconds" ::= { integraEmodem 18 } integraEmodemBackgroundBlockError OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Modem performance background block errors" ::= { integraEmodem 19 } integraEmodemTotalBlockNumber OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Modem performance total block number" ::= { integraEmodem 20 } integraEmodemErroredSecondRatio OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Modem performance errored second ratio" ::= { integraEmodem 21 } integraEmodemSeverelyErroredSecondRatio OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Modem performance severely errored second ratio" ::= { integraEmodem 22 } integraEmodemBackgroundBlockErrorRatio OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Modem performance background block error ratio" ::= { integraEmodem 23 } integraEmodemUptime OBJECT-TYPE SYNTAX Counter64 UNITS "s" MAX-ACCESS read-only STATUS current DESCRIPTION "Modem performance : uptime" ::= { integraEmodem 24 } integraEmodemUnavailtime OBJECT-TYPE SYNTAX Counter64 UNITS "s" MAX-ACCESS read-only STATUS current DESCRIPTION "Modem performance : unavailtime" ::= { integraEmodem 25 } integraEmodemModulationACMBmin OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Minimal modulation for ACMB enabled profile" ::= { integraEmodem 26 } integraEmodemModulationACMBmax OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Maximal modulation for ACMB enabled profile" ::= { integraEmodem 27 } integraEsystem OBJECT IDENTIFIER ::= { integraE 4 } integraEsysCPUtemperature OBJECT-TYPE SYNTAX FixedDiv10 UNITS "C" MAX-ACCESS read-only STATUS current DESCRIPTION "System CPU temperature" ::= { integraEsystem 2 } integraEsysLicenseExpire OBJECT-TYPE SYNTAX Gauge32 UNITS "s" MAX-ACCESS read-only STATUS current DESCRIPTION "License expires after number of seconds. In the case of -1, check licenseGenStatus status" ::= { integraEsystem 3 } integraEsysLicenseGenStatus OBJECT-TYPE SYNTAX INTEGER { ok(1), expired(2), unknown(3), unlimitedTime(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "License General status." ::= { integraEsystem 4 } integraEsysPSUvoltage OBJECT-TYPE SYNTAX Integer32 UNITS "mV" MAX-ACCESS read-only STATUS current DESCRIPTION "Power voltage in mV" ::= { integraEsystem 5 } integraEsysPSUcurrent OBJECT-TYPE SYNTAX Integer32 UNITS "mA" MAX-ACCESS read-only STATUS current DESCRIPTION "Power current in mA" ::= { integraEsystem 6 } integraEsysPSUpower OBJECT-TYPE SYNTAX Integer32 UNITS "mW" MAX-ACCESS read-only STATUS current DESCRIPTION "Power consumption in mW" ::= { integraEsystem 7 } integraEsysBoardTemperature OBJECT-TYPE SYNTAX FixedDiv10 UNITS "C" MAX-ACCESS read-only STATUS current DESCRIPTION "System temperature" ::= { integraEsystem 8 } integraEsysFreeMemory OBJECT-TYPE SYNTAX FixedDiv10 UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "System free memory" ::= { integraEsystem 9 } integraEsysCPUidle OBJECT-TYPE SYNTAX FixedDiv10 UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "System CPU idle" ::= { integraEsystem 10 } integraEsysDeviceType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Device type name" ::= { integraEsystem 11 } integraEsysDeviceSerial OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Device serial number" ::= { integraEsystem 12 } integraEsysDeviceProductModel OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Device product model code" ::= { integraEsystem 13 } integraEsysFanError OBJECT-TYPE SYNTAX BITS { no(0), fan1(1), unknown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Device fan 1 error status" ::= { integraEsystem 14 } -- service sensors integraEsysXADCtemperature OBJECT-TYPE SYNTAX FixedDiv10 UNITS "C" MAX-ACCESS read-only STATUS current DESCRIPTION "XADC Temperature" ::= { integraEsystem 15 } integraEsysVCCint OBJECT-TYPE SYNTAX FixedDiv20 UNITS "V" MAX-ACCESS read-only STATUS current DESCRIPTION "Vcc INT" ::= { integraEsystem 16 } integraEsysVCCaux OBJECT-TYPE SYNTAX FixedDiv20 UNITS "V" MAX-ACCESS read-only STATUS current DESCRIPTION "Vcc AUX" ::= { integraEsystem 17 } integraEsysVCCbram OBJECT-TYPE SYNTAX FixedDiv20 UNITS "V" MAX-ACCESS read-only STATUS current DESCRIPTION "Vcc BRAM" ::= { integraEsystem 18 } integraEsysVCCpint OBJECT-TYPE SYNTAX FixedDiv20 UNITS "V" MAX-ACCESS read-only STATUS current DESCRIPTION "Vcc PINT" ::= { integraEsystem 19 } integraEsysVCCpaux OBJECT-TYPE SYNTAX FixedDiv20 UNITS "V" MAX-ACCESS read-only STATUS current DESCRIPTION "Vcc PAUX" ::= { integraEsystem 20 } integraEsysVCCoddr OBJECT-TYPE SYNTAX FixedDiv20 UNITS "V" MAX-ACCESS read-only STATUS current DESCRIPTION "Vcc ODDR" ::= { integraEsystem 21 } integraEsysXadc6v0AvddMdmAna OBJECT-TYPE SYNTAX FixedDiv20 UNITS "V" MAX-ACCESS read-only STATUS current DESCRIPTION "XADC_6V0_AVDD_M - Modem Analog" ::= { integraEsystem 22 } integraEsysXadc1v0AvddSwAna OBJECT-TYPE SYNTAX FixedDiv20 UNITS "V" MAX-ACCESS read-only STATUS current DESCRIPTION "XADC_1V0_AVDD_S - Switch Analog" ::= { integraEsystem 23 } integraEsysXadc1v0AvddMdmAna OBJECT-TYPE SYNTAX FixedDiv20 UNITS "V" MAX-ACCESS read-only STATUS current DESCRIPTION "XADC_1V0_AVDD_M - Modem Analog" ::= { integraEsystem 24 } integraEsysXadc1v0DvddMdmDig OBJECT-TYPE SYNTAX FixedDiv20 UNITS "V" MAX-ACCESS read-only STATUS current DESCRIPTION "XADC_1V0_DVDD_M - Modem Digital" ::= { integraEsystem 25 } integraEsysXadc1v0CoreMdmDig OBJECT-TYPE SYNTAX FixedDiv20 UNITS "V" MAX-ACCESS read-only STATUS current DESCRIPTION "XADC_1V0_CORE_M - Modem Digital" ::= { integraEsystem 26 } integraEsysXadc2v5EnvAdcAvddMdmAna OBJECT-TYPE SYNTAX FixedDiv20 UNITS "V" MAX-ACCESS read-only STATUS current DESCRIPTION "XADC_2V5_ENVADC_AVDD - Modem Analog" ::= { integraEsystem 27 } integraEsysXadc1v0CoreSwDig OBJECT-TYPE SYNTAX FixedDiv20 UNITS "V" MAX-ACCESS read-only STATUS current DESCRIPTION "XADC_1V0_CORE_S - Switch Digital" ::= { integraEsystem 28 } integraEsysXadc5v0IqAvddMdmAna OBJECT-TYPE SYNTAX FixedDiv20 UNITS "V" MAX-ACCESS read-only STATUS current DESCRIPTION "XADC_5V0_IQ_AVDD - Modem Analog" ::= { integraEsystem 29 } integraEsysXadc2v5WbDacClAvddMdmAna OBJECT-TYPE SYNTAX FixedDiv20 UNITS "V" MAX-ACCESS read-only STATUS current DESCRIPTION "XADC_2V5_WBDAC_CL_AVDD - Modem Analog" ::= { integraEsystem 30 } integraEsysXadc1v2VccPhyDig OBJECT-TYPE SYNTAX FixedDiv20 UNITS "V" MAX-ACCESS read-only STATUS current DESCRIPTION "XADC_1V2_VCC - PHY Digital" ::= { integraEsystem 31 } integraEsysXadc4v6AfeDacAvddMdmAna OBJECT-TYPE SYNTAX FixedDiv20 UNITS "V" MAX-ACCESS read-only STATUS current DESCRIPTION "XADC_4V6_AFE_DAC_AVDD - Modem Analog" ::= { integraEsystem 32 } integraEsysXadc2v5WbDacAvddMdmAna OBJECT-TYPE SYNTAX FixedDiv20 UNITS "V" MAX-ACCESS read-only STATUS current DESCRIPTION "XADC_2V5_WBDAC_AVDD - Modem Analog" ::= { integraEsystem 33 } integraEsysXadc2v5VccSysDig OBJECT-TYPE SYNTAX FixedDiv20 UNITS "V" MAX-ACCESS read-only STATUS current DESCRIPTION "XADC_2V5_VCC - System Digital" ::= { integraEsystem 34 } integraEsysXadc3v3VccSysDig OBJECT-TYPE SYNTAX FixedDiv20 UNITS "V" MAX-ACCESS read-only STATUS current DESCRIPTION "XADC_3V3_VCC - System Digital" ::= { integraEsystem 35 } integraEsysXadc1v5Ddr3Sw OBJECT-TYPE SYNTAX FixedDiv20 UNITS "V" MAX-ACCESS read-only STATUS current DESCRIPTION "XADC_1V5_DDR3_S - Switch DDR3" ::= { integraEsystem 36 } integraEsysXadc2v5WbAdcAvddMdmAna OBJECT-TYPE SYNTAX FixedDiv20 UNITS "V" MAX-ACCESS read-only STATUS current DESCRIPTION "XADC_2V5_WBADC_AVDD - Modem Analog" ::= { integraEsystem 37 } integraEsysXadc2v5WbDacPllAvddMdmAna OBJECT-TYPE SYNTAX FixedDiv20 UNITS "V" MAX-ACCESS read-only STATUS current DESCRIPTION "XADC_2V5_WBDAC_PLL_AVDD - Modem Analog" ::= { integraEsystem 38 } -- Ethernet integraEethernet OBJECT IDENTIFIER ::= { integraE 5 } -- Port status integraEifStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF IntegraEifPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Network interface port status data." ::= { integraEethernet 1 } integraEifPortEntry OBJECT-TYPE SYNTAX IntegraEifPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing network physical port status info." INDEX { integraEifPortStatIndex } ::= { integraEifStatusTable 1 } IntegraEifPortEntry ::= SEQUENCE { integraEifPortStatIndex Integer32, integraEifPortStatDescr DisplayString, integraEifPortType IANAifType, integraEifPortMtu Integer32, integraEifPortHighSpeed Gauge32, integraEifPortPhysAddress PhysAddress, integraEifPortAdminStatus INTEGER, integraEifPortOperStatus INTEGER, integraEifPortLastChange TimeTicks, integraEifPortAutoneg INTEGER, integraEifPortDuplex INTEGER, integraEifPortSyncEthActive INTEGER, integraEifPortSyncEthPrio Integer32, integraEifPortFlowControl INTEGER } integraEifPortStatIndex OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value, greater than zero, for each physical network interface. It is recommended that values are assigned contiguously starting from 1." ::= { integraEifPortEntry 1 } integraEifPortStatDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Physical network interface description. LAN1 is electrical, LAN2 and LAN3 are SFP and WAN is radio port." ::= { integraEifPortEntry 2 } integraEifPortType OBJECT-TYPE SYNTAX IANAifType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack." ::= { integraEifPortEntry 3 } integraEifPortMtu OBJECT-TYPE SYNTAX Integer32 UNITS "B" MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum transmission unit value in bytes." ::= { integraEifPortEntry 4 } integraEifPortHighSpeed OBJECT-TYPE SYNTAX Gauge32 UNITS "Mbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Link speed in 1 000 000 * bits per second." ::= { integraEifPortEntry 5 } integraEifPortPhysAddress OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length." ::= { integraEifPortEntry 6 } integraEifPortAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), unknown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Desired state of network interfaces. Interfaces can be enabled(1), disabled(2), unknown(3) (no info received)." ::= { integraEifPortEntry 7 } integraEifPortOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), unknown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Actual state of interfaces. Link can be up(1), down(2) or in unknown(3) state." ::= { integraEifPortEntry 8 } integraEifPortLastChange OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter value is always 0 at the moment." ::= { integraEifPortEntry 9 } integraEifPortAutoneg OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), unknown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Auto-negotiation status. Unknown means no info was received." ::= { integraEifPortEntry 10 } integraEifPortDuplex OBJECT-TYPE SYNTAX INTEGER { full(1), half(2), unknown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Duplex status for the interface." ::= { integraEifPortEntry 11 } integraEifPortSyncEthActive OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Synchronous Ethernet status. Can be active(1) or inactive(0)." ::= { integraEifPortEntry 12 } integraEifPortSyncEthPrio OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Synchronous Ethernet priority." ::= { integraEifPortEntry 13 } integraEifPortFlowControl OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), unknown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Flow control status." ::= { integraEifPortEntry 14 } -- Port statistics integraEifStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF IntegraEifPortStcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Network interface port statistics data." ::= { integraEethernet 2 } integraEifPortStcEntry OBJECT-TYPE SYNTAX IntegraEifPortStcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing network physical port statistics counter data." INDEX { integraEifPortStcIndex } ::= { integraEifStatisticsTable 1 } IntegraEifPortStcEntry ::= SEQUENCE { integraEifPortStcIndex Integer32, integraEifPortStcDescr DisplayString, integraEifTimePassed TimeTicks, integraEifIngressPackets Counter64, integraEifIngressBytes Counter64, integraEifEgressPackets Counter64, integraEifEgressBytes Counter64, integraEifEtherStatsMulticastPkts Counter64, integraEifEtherStatsBroadcastPkts Counter64, integraEifEtherStatsPkts64Octets Counter64, integraEifEtherStatsPkts65to127Octets Counter64, integraEifEtherStatsPkts128to255Octets Counter64, integraEifEtherStatsPkts256to511Octets Counter64, integraEifEtherStatsPkts512to1023Octets Counter64, integraEifEtherStatsPkts1024to1518Octets Counter64, integraEifEtherStatsOversizePkts Counter64, integraEifEtherRxOversizePkts Counter64, integraEifEtherTxOversizePkts Counter64, integraEifEtherStatsOctets Counter64, integraEifEtherStatsPkts Counter64, integraEifEtherStatsTXNoErrors Counter64, integraEifEtherStatsRXNoErrors Counter64, integraEifEtherStatsPkts1519to1522Octets Counter64, integraEifIfInOctets Counter64, integraEifIfOutOctets Counter64, integraEifDot1dTpPortInFrames Counter64, integraEifDot1dTpPortOutFrames Counter64, integraEifReceivedPkts64Octets Counter64, integraEifTransmittedPkts64Octets Counter64, integraEifReceivedPkts65to127Octets Counter64, integraEifTransmittedPkts65to127Octets Counter64, integraEifReceivedPkts128to255Octets Counter64, integraEifTransmittedPkts128to255Octets Counter64, integraEifReceivedPkts256to511Octets Counter64, integraEifTransmittedPkts256to511Octets Counter64, integraEifReceivedPkts512to1023Octets Counter64, integraEifTransmittedPkts512to1023Octets Counter64, integraEifReceivedPkts1024to1518Octets Counter64, integraEifTransmittedPkts1024to1518Octets Counter64, integraEifIfInBroadcastPkts Counter64, integraEifIfOutBroadcastPkts Counter64, integraEifIfInMulticastPkts Counter64, integraEifIfOutMulticastPkts Counter64, integraEifDot3InPauseFrames Counter64, integraEifDot3OutPauseFrames Counter64, integraEifEtherStatsUndersizePkts Counter64, integraEifEtherStatsFragments Counter64, integraEifEtherStatsCRCAlignErrors Counter64, integraEifEtherStatsJabbers Counter64, integraEifIngressBPS Integer32, integraEifIngressPPS Integer32, integraEifEgressBPS Integer32, integraEifEgressPPS Integer32, integraEifAllCoSQoutPackets Counter64, integraEifAllCoSQoutBytes Counter64, integraEifAllCoSQdroppedPackets Counter64, integraEifAllCoSQdroppedBytes Counter64, integraEifProcessedRxPackets Counter64, integraEifProcessedRxBytes Counter64 } integraEifPortStcIndex OBJECT-TYPE SYNTAX Integer32 (1..5) MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value, greater than zero, for each physical network interface. It is recommended that values are assigned contiguously starting from 1." ::= { integraEifPortStcEntry 1 } integraEifPortStcDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Physical network interface description. LAN1 is electrical, LAN2 and LAN3 are SFP, WAN is radio port and MNG is internal management interface." ::= { integraEifPortStcEntry 2 } integraEifTimePassed OBJECT-TYPE SYNTAX TimeTicks UNITS "s/100" MAX-ACCESS read-only STATUS current DESCRIPTION "Statistics collection time." ::= { integraEifPortStcEntry 3 } integraEifIngressPackets OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "Packets that ingress on the port." ::= { integraEifPortStcEntry 4 } integraEifIngressBytes OBJECT-TYPE SYNTAX Counter64 UNITS "B" MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes that ingress on the port." ::= { integraEifPortStcEntry 5 } integraEifEgressPackets OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "Packets that egress on the port." ::= { integraEifPortStcEntry 6 } integraEifEgressBytes OBJECT-TYPE SYNTAX Counter64 UNITS "B" MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes that egress on the port." ::= { integraEifPortStcEntry 7 } integraEifEtherStatsMulticastPkts OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of good packets (both received and transmitted) that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address." ::= { integraEifPortStcEntry 8 } integraEifEtherStatsBroadcastPkts OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of good packets (both received and transmitted) that were directed to the broadcast address. Note that this does not include multicast packets." ::= { integraEifPortStcEntry 9 } integraEifEtherStatsPkts64Octets OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) (both received and transmitted) that were 64 octets in length (excluding framing bits but including FCS octets)." ::= { integraEifPortStcEntry 10 } integraEifEtherStatsPkts65to127Octets OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) (both received and transmitted) that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets)." ::= { integraEifPortStcEntry 11 } integraEifEtherStatsPkts128to255Octets OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) (both received and transmitted) that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets)." ::= { integraEifPortStcEntry 12 } integraEifEtherStatsPkts256to511Octets OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) (both received and transmitted) that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets)." ::= { integraEifPortStcEntry 13 } integraEifEtherStatsPkts512to1023Octets OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) (both received and transmitted) that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets)." ::= { integraEifPortStcEntry 14 } integraEifEtherStatsPkts1024to1518Octets OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) (both received and transmitted) that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets)." ::= { integraEifPortStcEntry 15 } integraEifEtherStatsOversizePkts OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets (both received and transmitted) that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed." ::= { integraEifPortStcEntry 16 } integraEifEtherRxOversizePkts OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets received that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed." ::= { integraEifPortStcEntry 17 } integraEifEtherTxOversizePkts OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets transmitted that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed." ::= { integraEifPortStcEntry 18 } integraEifEtherStatsOctets OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of octets of data (including those in bad packets) both received and transmitted." ::= { integraEifPortStcEntry 19 } integraEifEtherStatsPkts OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets (including bad packets) both received and transmitted." ::= { integraEifPortStcEntry 20 } integraEifEtherStatsTXNoErrors OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets that were transmitted without errors." ::= { integraEifPortStcEntry 21 } integraEifEtherStatsRXNoErrors OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets that were received without errors." ::= { integraEifPortStcEntry 22 } integraEifEtherStatsPkts1519to1522Octets OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) (both received and transmitted) that were between 1519 and 1522 octets in length inclusive (excluding framing bits but including FCS octets)." ::= { integraEifPortStcEntry 23 } integraEifIfInOctets OBJECT-TYPE SYNTAX Counter64 UNITS "octet" MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of octets of data (including those in bad packets) that were received." ::= { integraEifPortStcEntry 24 } integraEifIfOutOctets OBJECT-TYPE SYNTAX Counter64 UNITS "octet" MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of octets of data (including those in bad packets) that were transmitted." ::= { integraEifPortStcEntry 25 } integraEifDot1dTpPortInFrames OBJECT-TYPE SYNTAX Counter64 UNITS "frame" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames that have been received by this port from its segment." ::= { integraEifPortStcEntry 26 } integraEifDot1dTpPortOutFrames OBJECT-TYPE SYNTAX Counter64 UNITS "frame" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames that have been transmitted by this port to its segment." ::= { integraEifPortStcEntry 27 } integraEifReceivedPkts64Octets OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of received packets that were 64 octets in length (excluding framing bits but including FCS octets)." ::= { integraEifPortStcEntry 28 } integraEifTransmittedPkts64Octets OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of transmitted packets that were 64 octets in length (excluding framing bits but including FCS octets)." ::= { integraEifPortStcEntry 29 } integraEifReceivedPkts65to127Octets OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of received packets that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets)." ::= { integraEifPortStcEntry 30 } integraEifTransmittedPkts65to127Octets OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of transmitted packets that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets)." ::= { integraEifPortStcEntry 31 } integraEifReceivedPkts128to255Octets OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of received packets that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets)." ::= { integraEifPortStcEntry 32 } integraEifTransmittedPkts128to255Octets OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of transmitted packets that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets)." ::= { integraEifPortStcEntry 33 } integraEifReceivedPkts256to511Octets OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of received packets that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets)." ::= { integraEifPortStcEntry 34 } integraEifTransmittedPkts256to511Octets OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of transmitted packets that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets)." ::= { integraEifPortStcEntry 35 } integraEifReceivedPkts512to1023Octets OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of received packets that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets)." ::= { integraEifPortStcEntry 36 } integraEifTransmittedPkts512to1023Octets OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of transmitted packets that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets)." ::= { integraEifPortStcEntry 37 } integraEifReceivedPkts1024to1518Octets OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of received packets that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets)." ::= { integraEifPortStcEntry 38 } integraEifTransmittedPkts1024to1518Octets OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of transmitted packets that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets)." ::= { integraEifPortStcEntry 39 } integraEifIfInBroadcastPkts OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of received good packets that were directed to the broadcast address. Note that this does not include multicast packets." ::= { integraEifPortStcEntry 40 } integraEifIfOutBroadcastPkts OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of transmitted good packets that were directed to the broadcast address. Note that this does not include multicast packets." ::= { integraEifPortStcEntry 41 } integraEifIfInMulticastPkts OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of received good packets that were directed to a multicast address. Note that this number does not include broadcast packets." ::= { integraEifPortStcEntry 42 } integraEifIfOutMulticastPkts OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of transmitted good packets that were directed to a multicast address. Note that this number does not include broadcast packets." ::= { integraEifPortStcEntry 43 } integraEifDot3InPauseFrames OBJECT-TYPE SYNTAX Counter64 UNITS "frame" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of MAC Control frames received on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface is operating in half-duplex mode." ::= { integraEifPortStcEntry 44 } integraEifDot3OutPauseFrames OBJECT-TYPE SYNTAX Counter64 UNITS "frame" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of MAC Control frames transmitted on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface is operating in half-duplex mode." ::= { integraEifPortStcEntry 45 } integraEifEtherStatsUndersizePkts OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed." ::= { integraEifPortStcEntry 46 } integraEifEtherStatsFragments OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that it is entirely normal for etherStatsFragments to increment. This is because it counts both runts (which are normal occurrences due to collisions) and noise hits." ::= { integraEifPortStcEntry 47 } integraEifEtherStatsCRCAlignErrors OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error)." ::= { integraEifPortStcEntry 48 } integraEifEtherStatsJabbers OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms." ::= { integraEifPortStcEntry 49 } integraEifIngressBPS OBJECT-TYPE SYNTAX Integer32 UNITS "Bps" MAX-ACCESS read-only STATUS current DESCRIPTION "Ingoing data transfer rate in bytes per second." ::= { integraEifPortStcEntry 50 } integraEifIngressPPS OBJECT-TYPE SYNTAX Integer32 UNITS "pps" MAX-ACCESS read-only STATUS current DESCRIPTION "Ingoing data transfer rate in packets per second." ::= { integraEifPortStcEntry 51 } integraEifEgressBPS OBJECT-TYPE SYNTAX Integer32 UNITS "Bps" MAX-ACCESS read-only STATUS current DESCRIPTION "Outgoing data transfer rate in bytes per second." ::= { integraEifPortStcEntry 52 } integraEifEgressPPS OBJECT-TYPE SYNTAX Integer32 UNITS "pps" MAX-ACCESS read-only STATUS current DESCRIPTION "Outgoing data transfer rate in packets per second." ::= { integraEifPortStcEntry 53 } integraEifAllCoSQoutPackets OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "All CoSQ outgoing packets." ::= { integraEifPortStcEntry 54 } integraEifAllCoSQoutBytes OBJECT-TYPE SYNTAX Counter64 UNITS "B" MAX-ACCESS read-only STATUS current DESCRIPTION "All CoSQ outgoing bytes." ::= { integraEifPortStcEntry 55 } integraEifAllCoSQdroppedPackets OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "All CoSQ dropped packets." ::= { integraEifPortStcEntry 56 } integraEifAllCoSQdroppedBytes OBJECT-TYPE SYNTAX Counter64 UNITS "B" MAX-ACCESS read-only STATUS current DESCRIPTION "All CoSQ dropped bytes." ::= { integraEifPortStcEntry 57 } integraEifProcessedRxPackets OBJECT-TYPE SYNTAX Counter64 UNITS "packet" MAX-ACCESS read-only STATUS current DESCRIPTION "Processed received packets." ::= { integraEifPortStcEntry 58 } integraEifProcessedRxBytes OBJECT-TYPE SYNTAX Counter64 UNITS "B" MAX-ACCESS read-only STATUS current DESCRIPTION "Processed received bytes." ::= { integraEifPortStcEntry 59 } integraEifLspPortAdminState OBJECT-TYPE SYNTAX INTEGER { disabled(1), lsp(2), backup(3), unknown(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "LSP port status." ::= { integraEethernet 3 } integraEifLspPortList OBJECT-TYPE SYNTAX BITS { none(0), lan1(1), lan2(2), lan3(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "LSP port status." ::= { integraEethernet 4 } integraEifLspPortStatus OBJECT-TYPE SYNTAX INTEGER { lspPortOK(1), lspPortDownBlockedByLSP(2), backupNoLink(3), backupLinkActive(4), backupLinkReady(5), unknown(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "LSP port status." ::= { integraEethernet 5 } -- Configuration applying/saving objects integraEexecuteConfig OBJECT-TYPE SYNTAX INTEGER { execute(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object can only be set to 1. It initiates new running configuration applying using values, that have been set before. Setting it when no new changes are available will do nothing and return an error. GET will return 0 if there were no errors, while executing configuration or will return a bitmask, that shows which SET requests have failed. Those failed requests will be shown bit wise from LSB as follows: BIT0 radioTxMuteDuration BIT1 radioTxFrequency BIT2 radioTxPower" ::= { integraE 6 } integraEneedStore OBJECT-TYPE SYNTAX INTEGER { no(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object shows if there is unsaved, but executed (running) configuration. Unsaved changes will be lost after device reboot. Unsaved entities are shown bit wise, starting from LSB as follows: BIT0 Aggregation BIT1 Event log BIT2 Modem BIT3 Network BIT4 Performance BIT5 Radio BIT6 SNMP BIT7 Synchronous Ethernet BIT8 System" ::= { integraE 7 } integraEstoreConfig OBJECT-TYPE SYNTAX INTEGER { store(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object can only be set to 1. It initiates saving of running configuration. It will only work if there are unsaved, but executed (running) changes (configuration). Setting it when no new running configuration is available will do nothing and return an error." ::= { integraE 8 } -- IP settings integraEnetCfg OBJECT IDENTIFIER ::= { integraE 9 } integraEnetCfgIPaddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Local IP address" ::= { integraEnetCfg 1 } integraEnetCfgIPmask OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Local IP mask" ::= { integraEnetCfg 2 } integraEnetCfgIPgateway OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "IP gateway Send '0' or '255.255.255.255' to clear." ::= { integraEnetCfg 3 } integraEnetCfgRemoteIPaddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Remote IP address" ::= { integraEnetCfg 4 } -- Conformance integraEConformance OBJECT IDENTIFIER ::= { integraE 10 } integraECompliances OBJECT IDENTIFIER ::= { integraEConformance 1 } integraECompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP engine which implements the SAF Tehnika Integra-E device." MODULE -- this module MANDATORY-GROUPS { integraEMiscGroup, integraERadioGroup, integraEModemGroup, integraESystemGroup, integraEEthernetGeneralGroup, integraEEthernetMiiPortGroup } ::= { integraECompliances 1 } integraEGroups OBJECT IDENTIFIER ::= { integraEConformance 2 } integraEMiscGroup OBJECT-GROUP OBJECTS { integraEtimestamp } STATUS current DESCRIPTION "misc data" ::= { integraEGroups 1 } integraERadioGroup OBJECT-GROUP OBJECTS { integraEradioTxPower, integraEradioTxFrequency, integraEradioRxLevel, integraEradioSide, integraEradioTxMute, integraEradioDuplexShift, integraEradioRxFrequency, integraEradioTemperature, integraEradioTxMuteDuration, integraEradioRangeEntryIndex, integraEradioRangeDescr, integraEradioRangeTxPower, integraEradioRangeTxFrequency, integraEradioPLL, integraEradioRxLevelState, integraEradioAtpcState, integraEradioAtpcUpdatePeriod, integraEradioAtpcRxLevelMin, integraEradioAtpcRxLevelMax } STATUS current DESCRIPTION "Radio group." ::= { integraEGroups 2 } integraEModemGroup OBJECT-GROUP OBJECTS { integraEmodemAcquireStatus, integraEmodemNormalizedMse, integraEmodemFECload, integraEmodemFEClocked, integraEmodemAcquireLastStatusDetails, integraEmodemTemperature, integraEmodemBandwidth, integraEmodemModulation, integraEmodemRxModulation, integraEmodemTxModulation, integraEmodemRxCapacity, integraEmodemTxCapacity, integraEmodemACMBengine, integraEmodemCarrierOffset, integraEmodemCountTime, integraEmodemErroredBlock, integraEmodemErroredSecond, integraEmodemSeverelyErroredSecond, integraEmodemBackgroundBlockError, integraEmodemTotalBlockNumber, integraEmodemErroredSecondRatio, integraEmodemSeverelyErroredSecondRatio, integraEmodemBackgroundBlockErrorRatio, integraEmodemUptime, integraEmodemUnavailtime, integraEmodemModulationACMBmin, integraEmodemModulationACMBmax } STATUS current DESCRIPTION "Modem group." ::= { integraEGroups 3 } integraESystemGroup OBJECT-GROUP OBJECTS { integraEsysCPUtemperature, integraEsysLicenseExpire, integraEsysLicenseGenStatus, integraEsysPSUvoltage, integraEsysPSUcurrent, integraEsysPSUpower, integraEsysBoardTemperature, integraEsysFreeMemory, integraEsysCPUidle, integraEsysDeviceType, integraEsysDeviceSerial, integraEsysDeviceProductModel, integraEsysFanError, integraEexecuteConfig, integraEneedStore, integraEstoreConfig, integraEsysXADCtemperature, integraEsysVCCint, integraEsysVCCaux, integraEsysVCCbram, integraEsysVCCpint, integraEsysVCCpaux, integraEsysVCCoddr, integraEsysXadc6v0AvddMdmAna, integraEsysXadc1v0AvddSwAna, integraEsysXadc1v0AvddMdmAna, integraEsysXadc1v0DvddMdmDig, integraEsysXadc1v0CoreMdmDig, integraEsysXadc2v5EnvAdcAvddMdmAna, integraEsysXadc1v0CoreSwDig, integraEsysXadc5v0IqAvddMdmAna, integraEsysXadc2v5WbDacClAvddMdmAna, integraEsysXadc1v2VccPhyDig, integraEsysXadc4v6AfeDacAvddMdmAna, integraEsysXadc2v5WbDacAvddMdmAna, integraEsysXadc2v5VccSysDig, integraEsysXadc3v3VccSysDig, integraEsysXadc1v5Ddr3Sw, integraEsysXadc2v5WbAdcAvddMdmAna, integraEsysXadc2v5WbDacPllAvddMdmAna } STATUS current DESCRIPTION "System group." ::= { integraEGroups 4 } integraEEthernetGeneralGroup OBJECT-GROUP OBJECTS { integraEifPortStatIndex, integraEifPortStatDescr, integraEifPortType, integraEifPortMtu, integraEifPortHighSpeed, integraEifPortPhysAddress, integraEifPortAdminStatus, integraEifPortOperStatus, integraEifPortLastChange, integraEifPortAutoneg, integraEifPortDuplex, integraEifPortSyncEthActive, integraEifPortSyncEthPrio, integraEifPortFlowControl, integraEifPortStcIndex, integraEifPortStcDescr, integraEifTimePassed, integraEifIngressPackets, integraEifIngressBytes, integraEifEgressPackets, integraEifEgressBytes, integraEifEtherRxOversizePkts, integraEifEtherTxOversizePkts, integraEifReceivedPkts64Octets, integraEifTransmittedPkts64Octets, integraEifReceivedPkts65to127Octets, integraEifTransmittedPkts65to127Octets, integraEifReceivedPkts128to255Octets, integraEifTransmittedPkts128to255Octets, integraEifReceivedPkts256to511Octets, integraEifTransmittedPkts256to511Octets, integraEifReceivedPkts512to1023Octets, integraEifTransmittedPkts512to1023Octets, integraEifReceivedPkts1024to1518Octets, integraEifTransmittedPkts1024to1518Octets, integraEifIfInBroadcastPkts, integraEifIfOutBroadcastPkts, integraEifIfInMulticastPkts, integraEifIfOutMulticastPkts, integraEifIngressBPS, integraEifIngressPPS, integraEifEgressBPS, integraEifEgressPPS, integraEifAllCoSQoutPackets, integraEifAllCoSQoutBytes, integraEifAllCoSQdroppedPackets, integraEifAllCoSQdroppedBytes, integraEifProcessedRxPackets, integraEifProcessedRxBytes, integraEnetCfgIPaddress, integraEnetCfgIPmask, integraEnetCfgIPgateway, integraEnetCfgRemoteIPaddress, integraEifLspPortAdminState, integraEifLspPortList, integraEifLspPortStatus } STATUS current DESCRIPTION "A collection to objects, providing info applicable to all network interfaces." ::= { integraEGroups 5 } integraEEthernetMiiPortGroup OBJECT-GROUP OBJECTS { integraEifEtherStatsMulticastPkts, integraEifEtherStatsBroadcastPkts, integraEifEtherStatsPkts64Octets, integraEifEtherStatsPkts65to127Octets, integraEifEtherStatsPkts128to255Octets, integraEifEtherStatsPkts256to511Octets, integraEifEtherStatsPkts512to1023Octets, integraEifEtherStatsPkts1024to1518Octets, integraEifEtherStatsOversizePkts, integraEifEtherStatsOctets, integraEifEtherStatsPkts, integraEifEtherStatsTXNoErrors, integraEifEtherStatsRXNoErrors, integraEifEtherStatsPkts1519to1522Octets, integraEifIfInOctets, integraEifIfOutOctets, integraEifDot1dTpPortInFrames, integraEifDot1dTpPortOutFrames, integraEifDot3InPauseFrames, integraEifDot3OutPauseFrames, integraEifEtherStatsUndersizePkts, integraEifEtherStatsFragments, integraEifEtherStatsCRCAlignErrors, integraEifEtherStatsJabbers } STATUS current DESCRIPTION "A collection of objects, providing info applicable only to MII group interfaces." ::= { integraEGroups 6 } END