-- This module defines enterprise MIBs for VPN IP pool
-- 
-- Copyright (c) 1999-2004, Juniper Networks, Inc.
-- All rights reserved.

NETSCREEN-IPPOOL-MIB DEFINITIONS ::= BEGIN

IMPORTS
    netscreenVpn, netscreenVpnMibModule
        FROM NETSCREEN-SMI
    Integer32, IpAddress, MODULE-IDENTITY, OBJECT-TYPE
        FROM SNMPv2-SMI
    DisplayString
        FROM SNMPv2-TC
    ;

netscreenIppoolMibModule MODULE-IDENTITY
    LAST-UPDATED  "200405032022Z" -- May 03, 2004
    ORGANIZATION
        "Juniper Networks, Inc."
    CONTACT-INFO
        "Customer Support

         1194 North Mathilda Avenue 
         Sunnyvale, California 94089-1206
         USA

         Tel: 1-800-638-8296
         E-mail: customerservice@juniper.net
         HTTP://www.juniper.net"
    DESCRIPTION
        "This module defines the object that are used to monitor 
         VPN IP pool"
    REVISION      "200405030000Z" -- May 03, 2004
    DESCRIPTION
        "Modified copyright and contact information"
    REVISION      "200403030000Z" -- March 03, 2004
    DESCRIPTION
        "Converted to SMIv2 by Longview Software"
    REVISION      "200311130000Z" -- November 13, 2003
    DESCRIPTION
        "Correct spelling mistake"
    REVISION      "200109280000Z" -- September 28, 2001
    DESCRIPTION
        "no comment"
    REVISION      "200008270000Z" -- August 27, 2000
    DESCRIPTION
        "Creation date"
    ::= { netscreenVpnMibModule 9 }

NsVpnIpPoolEntry ::= SEQUENCE
{
    nsVpnIpPoolIndex   Integer32,
    nsVpnIpPoolName    DisplayString,
    nsVpnIpPoolStartIp IpAddress,
    nsVpnIpPoolEndIp   IpAddress,
    nsVpnIpPoolIpUsed  Integer32
}

nsVpnIpPool OBJECT IDENTIFIER ::= { netscreenVpn 9 }

nsVpnIpPoolTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF NsVpnIpPoolEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "This table collects all ip pool configuration in NetScreen
         device."
    ::= { nsVpnIpPool 1 }

nsVpnIpPoolEntry OBJECT-TYPE
    SYNTAX        NsVpnIpPoolEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "Each entry in the nsVpnIpPoolEntry holds a set of
         configuration parameters associated with an instance IP pool."
    INDEX
        { nsVpnIpPoolIndex }
    ::= { nsVpnIpPoolTable 1 }

nsVpnIpPoolIndex OBJECT-TYPE
    SYNTAX        Integer32 (0..2147483647)
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "A unique value for ip pool.  Its value ranges between 0 and
         65535 and may not be contiguous."
    ::= { nsVpnIpPoolEntry 1 }

nsVpnIpPoolName OBJECT-TYPE
    SYNTAX        DisplayString (SIZE(0..32))
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "ip pool name"
    ::= { nsVpnIpPoolEntry 2 }

nsVpnIpPoolStartIp OBJECT-TYPE
    SYNTAX        IpAddress
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "IP pool's start ip address."
    ::= { nsVpnIpPoolEntry 3 }

nsVpnIpPoolEndIp OBJECT-TYPE
    SYNTAX        IpAddress
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "IP pool's end ip address."
    ::= { nsVpnIpPoolEntry 4 }

nsVpnIpPoolIpUsed OBJECT-TYPE
    SYNTAX        Integer32 
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Total number of addresses in use from this pool." 
    ::= { nsVpnIpPoolEntry 5 }

END