-- This module defines enterprise MIBs for Gateway VPN
-- configuration
-- 
-- Copyright (c) 1999-2004, Juniper Networks, Inc.
-- All rights reserved.

NETSCREEN-VPN-GATEWAY-MIB DEFINITIONS ::= BEGIN

IMPORTS
    netscreenVpn, netscreenVpnMibModule
        FROM NETSCREEN-SMI
    Integer32, IpAddress, MODULE-IDENTITY, OBJECT-TYPE
        FROM SNMPv2-SMI
    DisplayString
        FROM SNMPv2-TC
    ;

netscreenVpnGatewayMibModule MODULE-IDENTITY
    LAST-UPDATED  "200405032022Z" -- May 03, 2004
    ORGANIZATION
        "Juniper Networks, Inc."
    CONTACT-INFO
        "Customer Support

         1194 North Mathilda Avenue 
         Sunnyvale, California 94089-1206
         USA

         Tel: 1-800-638-8296
         E-mail: customerservice@juniper.net
         HTTP://www.juniper.net"
    DESCRIPTION
        "This module defines NetScreen private MIBs for Gateway VPN
         configuration"
    REVISION      "200405030000Z" -- May 03, 2004
    DESCRIPTION
        "Modified copyright and contact information"
    REVISION      "200403030000Z" -- March 03, 2004
    DESCRIPTION
        "Converted to SMIv2 by Longview Software"
    REVISION      "200311130000Z" -- November 13, 2003
    DESCRIPTION
        "Correct spelling mistake"
    REVISION      "200109280000Z" -- September 28, 2001
    DESCRIPTION
        "No comment"
    REVISION      "200105140000Z" -- May 14, 2001
    DESCRIPTION
        "Creation date"
    ::= { netscreenVpnMibModule 4 }

NsVpnGwEntry ::= SEQUENCE
{
    nsVpnGwIndex          Integer32,
    nsVpnGwName           DisplayString,
    nsVpnGwRemoteType     INTEGER,
    nsVpnGwRemoteStaticIp IpAddress,
    nsVpnGwRemotePeerId   DisplayString,
    nsVpnGwDialup         DisplayString,
    nsVpnGwInitMode       INTEGER,
    nsVpnGwPhOnePropOne   DisplayString,
    nsVpnGwPhOnePropTwo   DisplayString,
    nsVpnGwPhOnePropThree DisplayString,
    nsVpnGwPhOnePropFour  DisplayString,
    nsVpnGwCertLocal      DisplayString,
    nsVpnGwPeerCa         DisplayString,
    nsVpnGwPeerType       INTEGER,
    nsVpnGwVsys           Integer32
}

nsVpnGateway OBJECT IDENTIFIER ::= { netscreenVpn 4 }

nsVpnGwTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF NsVpnGwEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "Remote tunnel gateway table collects tunnel gateway
         configurations."
    ::= { nsVpnGateway 1 }

nsVpnGwEntry OBJECT-TYPE
    SYNTAX        NsVpnGwEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "Each entry in the nsVpnGwTable holds a set of configuration
         parameters  associated with an instance of tunnel gateway."
    INDEX
        { nsVpnGwIndex }
    ::= { nsVpnGwTable 1 }

nsVpnGwIndex OBJECT-TYPE
    SYNTAX        Integer32 (0..2147483647)
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "A unique value for ike gateway table.  Its value ranges
         between 0 and 65535 and may not be contiguous."
    ::= { nsVpnGwEntry 1 }

nsVpnGwName OBJECT-TYPE
    SYNTAX        DisplayString (SIZE(0..32))
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Tunnel gateway name."
    ::= { nsVpnGwEntry 2 }

nsVpnGwRemoteType OBJECT-TYPE
    SYNTAX        INTEGER {
        static-ip(0),
        dynamic-ip(1),
        dialup-user(3)
    }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Remote tunnel gateway type.It shows whether the gateway use
         static ip, dynamic ip or dialup user."
    ::= { nsVpnGwEntry 3 }

nsVpnGwRemoteStaticIp OBJECT-TYPE
    SYNTAX        IpAddress
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "ip address of static-ip gateway."
    ::= { nsVpnGwEntry 4 }

nsVpnGwRemotePeerId OBJECT-TYPE
    SYNTAX        DisplayString (SIZE(0..32))
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Remote gateway peer id, which can be used for static-ip and
         dynamic ip gateway. This is optional for the static-ip
         gateway."
    ::= { nsVpnGwEntry 5 }

nsVpnGwDialup OBJECT-TYPE
    SYNTAX        DisplayString (SIZE(0..32))
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Remote gateway dialup user or group"
    ::= { nsVpnGwEntry 6 }

nsVpnGwInitMode OBJECT-TYPE
    SYNTAX        INTEGER {
        main(0),
        aggressive(1)
    }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Phase 1 can take place in either Main mode or Aggressive
         mode."
    ::= { nsVpnGwEntry 7 }

nsVpnGwPhOnePropOne OBJECT-TYPE
    SYNTAX        DisplayString (SIZE(0..32))
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Phase 1 Proposal one."
    ::= { nsVpnGwEntry 8 }

nsVpnGwPhOnePropTwo OBJECT-TYPE
    SYNTAX        DisplayString (SIZE(0..32))
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Phase 1 Proposal two."
    ::= { nsVpnGwEntry 9 }

nsVpnGwPhOnePropThree OBJECT-TYPE
    SYNTAX        DisplayString (SIZE(0..32))
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Phase 1 Proposal three."
    ::= { nsVpnGwEntry 10 }

nsVpnGwPhOnePropFour OBJECT-TYPE
    SYNTAX        DisplayString (SIZE(0..32))
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Phase 1 Proposal four."
    ::= { nsVpnGwEntry 11 }

nsVpnGwCertLocal OBJECT-TYPE
    SYNTAX        DisplayString (SIZE(0..32))
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Local Certificate configuration for preferred
         certification.(optional)"
    ::= { nsVpnGwEntry 12 }

nsVpnGwPeerCa OBJECT-TYPE
    SYNTAX        DisplayString (SIZE(0..32))
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Preferred Peer CA(optional)"
    ::= { nsVpnGwEntry 13 }

nsVpnGwPeerType OBJECT-TYPE
    SYNTAX        INTEGER {
        none(0),
        pkcs7(1),
        pgp(2),
        dns(3),
        x509-sig(4),
        x509-ke(5),
        keerberos(6),
        crl(7),
        arl(8),
        spki(9),
        x509-att(10)
    }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Peer Type(optional)"
    ::= { nsVpnGwEntry 14 }

nsVpnGwVsys OBJECT-TYPE
    SYNTAX        Integer32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "vsys this gateway configuration belongs to."
    ::= { nsVpnGwEntry 15 }

END