-- This module defines enterprise MIBs for VPN IKE info
-- 
-- Copyright (c) 1999-2004, Juniper Networks, Inc.
-- All rights reserved.

NETSCREEN-VPN-IKE-MIB DEFINITIONS ::= BEGIN

IMPORTS
    netscreenVpn, netscreenVpnMibModule
        FROM NETSCREEN-SMI
    Integer32, MODULE-IDENTITY, OBJECT-TYPE
        FROM SNMPv2-SMI
    DisplayString
        FROM SNMPv2-TC
    ;

netscreenVpnIkeMibModule MODULE-IDENTITY
    LAST-UPDATED  "200405032022Z" -- May 03, 2004
    ORGANIZATION
        "Juniper Networks, Inc."
    CONTACT-INFO
        "Customer Support

         1194 North Mathilda Avenue 
         Sunnyvale, California 94089-1206
         USA

         Tel: 1-800-638-8296
         E-mail: customerservice@juniper.net
         HTTP://www.juniper.net"
    DESCRIPTION
        "This module defines the object that are used to monitor 
         VPN IKE info"
    REVISION      "200405030000Z" -- May 03, 2004
    DESCRIPTION
        "Modified copyright and contact information"
    REVISION      "200403030000Z" -- March 03, 2004
    DESCRIPTION
        "Converted to SMIv2 by Longview Software"
    REVISION      "200311130000Z" -- November 13, 2003
    DESCRIPTION
        "Correct spelling mistake"
    REVISION      "200109280000Z" -- September 28, 2001
    DESCRIPTION
        "No comment"
    REVISION      "200105140000Z" -- May 14, 2001
    DESCRIPTION
        "Creation Date"
    ::= { netscreenVpnMibModule 3 }

NsVpnIkeEntry ::= SEQUENCE
{
    nsVpnIkeIndex            Integer32,
    nsVpnIkeName             DisplayString,
    nsVpnIkeReplayProc       INTEGER,
    nsVpnIkeGWTun            DisplayString,
    nsVpnIkePh2ProOne        DisplayString,
    nsVpnIkePh2ProTwo        DisplayString,
    nsVpnIkePh2ProThree      DisplayString,
    nsVpnIkePh2ProFour       DisplayString,
    nsVpnIkeMonitorEnable    INTEGER,
    nsVpnIkeTransMode        INTEGER,
    nsVpnIkeVsys             Integer32
}

nsVpnIke OBJECT IDENTIFIER ::= { netscreenVpn 3 }

nsVpnIkeTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF NsVpnIkeEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "IPSec supports the automated generation and negotiation of
         keys and security associations using the Internet Key
         Exchange(IKE) protocol. This table collects the IKE
         configuration in NetScreen device."
    ::= { nsVpnIke 1 }

nsVpnIkeEntry OBJECT-TYPE
    SYNTAX        NsVpnIkeEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "Each entry in the nsVpnIkeTable holds a set of configuration
         parameters associated with an IKE."
    INDEX
        { nsVpnIkeIndex }
    ::= { nsVpnIkeTable 1 }

nsVpnIkeIndex OBJECT-TYPE
    SYNTAX        Integer32 (0..2147483647)
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "A unique value for  ike table.  Its value ranges between 0 and
         65535 and may not be contiguous."
    ::= { nsVpnIkeEntry 1 }

nsVpnIkeName OBJECT-TYPE
    SYNTAX        DisplayString (SIZE(0..32))
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Each IKE configuration can have a readable name."
    ::= { nsVpnIkeEntry 2 }

nsVpnIkeReplayProc OBJECT-TYPE
    SYNTAX        INTEGER {
        disable(0),
        enabled(1)
    }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Enable Replay Protection"
    ::= { nsVpnIkeEntry 3 }

nsVpnIkeGWTun OBJECT-TYPE
    SYNTAX        DisplayString (SIZE(0..32))
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Remote Gateway Tunnel Name"
    ::= { nsVpnIkeEntry 4 }

nsVpnIkePh2ProOne OBJECT-TYPE
    SYNTAX        DisplayString (SIZE(0..32))
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Phase 2 Proposal one"
    ::= { nsVpnIkeEntry 5 }

nsVpnIkePh2ProTwo OBJECT-TYPE
    SYNTAX        DisplayString (SIZE(0..32))
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Phase 2 Proposal two"
    ::= { nsVpnIkeEntry 6 }

nsVpnIkePh2ProThree OBJECT-TYPE
    SYNTAX        DisplayString (SIZE(0..32))
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Phase 2 Proposal three"
    ::= { nsVpnIkeEntry 7 }

nsVpnIkePh2ProFour OBJECT-TYPE
    SYNTAX        DisplayString (SIZE(0..32))
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Phase 2 Proposal four"
    ::= { nsVpnIkeEntry 8 }

nsVpnIkeMonitorEnable OBJECT-TYPE
    SYNTAX        INTEGER {
        disable(0),
        enabled(1)
    }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Enable to monitor VPN tunnel's link status."
    ::= { nsVpnIkeEntry 9 }

nsVpnIkeTransMode OBJECT-TYPE
    SYNTAX        INTEGER {
        disable(0),
        enabled(1)
    }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Transport Mode   Enable (For L2TP-over-IPSec only)"
    ::= { nsVpnIkeEntry 10 }

nsVpnIkeVsys OBJECT-TYPE
    SYNTAX        Integer32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "vsys the configuration belongs to."
    ::= { nsVpnIkeEntry 11 }

END