-- ---------------------------------------------------------------------------- -- -- SIAE MICROELETTRONICA s.p.a. -- -- Via Michelangelo Buonarroti, 21 -- 20093 - Cologno Monzese -- Milano -- ITALY -- -- ---------------------------------------------------------------------------- -- ---------------------------------------------------------------------------- SIAE-SENSOR-TEMP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32 FROM SNMPv2-SMI DisplayString FROM SNMPv2-TC siaeMib FROM SIAE-TREE-MIB AlarmStatus, AlarmSeverityCode FROM SIAE-ALARM-MIB; sensorTemp MODULE-IDENTITY LAST-UPDATED "201605030000Z" ORGANIZATION "SIAE MICROELETTRONICA spa" CONTACT-INFO "SIAE MICROELETTONICA s.p.a. Via Michelangelo Buonarroti, 21 20093 - Cologno Monzese Milano - ITALY Phone : +39-02-27325-1 E-mail: tbd@siaemic.com " DESCRIPTION "Management information for equipment heat. " REVISION "201605030000Z" DESCRIPTION "MIB version 01.00.01 - Added sensorTempMonitorTable and sensorTempMonitorSystemControl - Added DEFVAL clause to sensorTempAlarmThreshold1Severity and sensorTempAlarmThreshold2Severity " REVISION "201403310000Z" DESCRIPTION "Initial version 01.00.00 " ::= { siaeMib 77 } ---------------------------------------------------------------------------------- -- Temperature Sensors Management information ---------------------------------------------------------------------------------- -- -- This MIB is used to describe the temperature devices available on the equipment. -- Each device represents a temperature sensor. It displays the current temperature. -- Each records has got 2 thresholds passing one of them an indication is generated. -- When at least one device has got a pass indication an alarm rises. -- The alarm drops when the temperature is 5°C under the threshold which generates the -- indication. -- ---------------------------------------------------------------------------------- ------ Beginning -------------------------------------------------------------- sensorTempMibVersion OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Numerical version of this module. The string version of this MIB have the following format: XX.YY.ZZ so, for example, the value 1 should be interpreted as 00.00.01 and the value 10001 should be interpreted as 01.00.01." ::= {sensorTemp 1} ------- Begin of sensorTempTable -- sensorTempTable OBJECT-TYPE SYNTAX SEQUENCE OF SensorTempEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with sensorTemp device entries" ::= {sensorTemp 2} sensorTempEntry OBJECT-TYPE SYNTAX SensorTempEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Temperature Sensor entry" INDEX {sensorTempIndex} ::= {sensorTempTable 1} SensorTempEntry ::= SEQUENCE { sensorTempIndex Integer32, sensorTempValue Integer32, sensorTempThreshold1 Integer32, sensorTempThreshold2 Integer32, sensorTempHysteresis1 Integer32, sensorTempHysteresis2 Integer32, sensorTempStatus1 INTEGER, sensorTempStatus2 INTEGER, sensorTempLabel DisplayString } sensorTempIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Temperature Sensor index. " ::= {sensorTempEntry 1} sensorTempValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of the temperature (in Celsius). " ::= {sensorTempEntry 2} sensorTempThreshold1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object can not be modified. It reports the temperature threshold 1. When sensorTempValue exceeds this value sensorTempStatus1 becomes Active. When threshold has been exceed status returns stand-by only when sensorTempValue goes under sensorTempHysteresis1. " ::= {sensorTempEntry 3} sensorTempThreshold2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object can not be modified. It reports the temperature threshold 2. When sensorTempValue exceeds this value sensorTempStatus2 becomes Active. When threshold has been exceed status returns stand-by only when sensorTempValue goes under sensorTempHysteresis2. " ::= {sensorTempEntry 4} sensorTempHysteresis1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object can not be modified. It reports the temperature hysteresis 1. When sensorTempStatus1 is Active it represents the value under which returns cleared. " ::= {sensorTempEntry 5} sensorTempHysteresis2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object can not be modified. It reports the temperature hysteresis 2. When sensorTempStatus1 is Active it represents the value under which returns cleared. " ::= {sensorTempEntry 6} sensorTempStatus1 OBJECT-TYPE SYNTAX INTEGER { cleared (1), alarmed (2), hysteresis (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to manage temperature related to sensorTempThreshold1. Values mean: cleared: sensorTempValue is lower than threshold1 active: sensorTempValue is greater than threshold1 hysteresis: sensorTempValue is between threshold1 and hysteresis1 but previuosly greater than thresold1. " ::= {sensorTempEntry 7} sensorTempStatus2 OBJECT-TYPE SYNTAX INTEGER { cleared (1), alarmed (2), hysteresis (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to manage temperature related to sensorTempThreshold2. Values mean: cleared: sensorTempValue is lower than threshold2 active: sensorTempValue is greater than threshold2 hysteresis: sensorTempValue is between threshold2 and hysteresis2 but previuosly greater than thresold2. " ::= {sensorTempEntry 8} sensorTempLabel OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "A textual string containing information on sensorTemp sensor. " ::= {sensorTempEntry 9} -- ------- End of sensorTempTable sensorTempAlarmThreshold1 OBJECT-TYPE SYNTAX AlarmStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to notiy alarm if at least one entry in the sensorTemp table has got sensorTempStatus1 alarmed." ::= {sensorTemp 3} sensorTempAlarmThreshold2 OBJECT-TYPE SYNTAX AlarmStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to notiy alarm if at least one entry in the sensorTemp table has got sensorTempStatus2 alarmed." ::= {sensorTemp 4} sensorTempAlarmThreshold1Severity OBJECT-TYPE SYNTAX AlarmSeverityCode MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to change severity of sensorTempAlarmThreshold1." DEFVAL { warningTrapEnable } ::= {sensorTemp 5} sensorTempAlarmThreshold2Severity OBJECT-TYPE SYNTAX AlarmSeverityCode MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to change severity of sensorTempAlarmThreshold2." DEFVAL { criticalTrapEnable } ::= {sensorTemp 6} ---------------------------------------------------------------------------------- -- TEMP-MONITOR feature ---------------------------------------------------------------------------------- -- -- For each temperature sensor shown in sensorTempMonitorTable it is possible -- to register a record every 15 min. Each record includes, along with some -- auxiliary information, the min, max and average temperature observed in -- the period of time. The registered data can be exported to the SNMP manager -- by using SIAE-PMFTP-MIB. -- ---------------------------------------------------------------------------------- ------- Begin of sensorTempMonitorTable -- sensorTempMonitorTable OBJECT-TYPE SYNTAX SEQUENCE OF SensorTempMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with sensorTempMonitor entries" ::= {sensorTemp 7} sensorTempMonitorEntry OBJECT-TYPE SYNTAX SensorTempMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Temperature Sensor Monitor entry" INDEX {sensorTempIndex} ::= {sensorTempMonitorTable 1} SensorTempMonitorEntry ::= SEQUENCE { sensorTempMonitorAdminStatus INTEGER, sensorTempMonitorOperStatus INTEGER, sensorTempMonitorMinTemp Integer32, sensorTempMonitorMaxTemp Integer32, sensorTempMonitorAverageTemp Integer32 } sensorTempMonitorAdminStatus OBJECT-TYPE SYNTAX INTEGER { up (1), down (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The desired state of the temperatuure monitor. When a managed system initializes, all the temperature monitors start with sensorTempMonitorAdminStatus in the down(2) state, it's a default state also. As a result of either explicit management action or per configuration information retained by the managed system, sensorTempMonitorAdminStatus is then changed to the up(1) state (or remains in the down(2) state). " DEFVAL { down } ::= {sensorTempMonitorEntry 1} sensorTempMonitorOperStatus OBJECT-TYPE SYNTAX INTEGER { up (1), down (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the temperatuure monitor. Usually this object report the same value of sensorTempMonitorAdminStatus. When there is some problem related to the temperature sensor, this object shown the down(2) value even if sensorTempMonitorAdminStatus is set to up(1). " ::= {sensorTempMonitorEntry 2} sensorTempMonitorMinTemp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum value of the temperature measured in the last actual 900 seconds. The value is expressed in degrees Celsius. " ::= {sensorTempMonitorEntry 3} sensorTempMonitorMaxTemp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum value of the temperature measured in the last actual 900 seconds. The value is expressed in degrees Celsius. " ::= {sensorTempMonitorEntry 4} sensorTempMonitorAverageTemp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average value of the temperature measured in the last actual 900 seconds. The value is expressed in tenth of degrees Celsius. " ::= {sensorTempMonitorEntry 5} -- ------- End of sensorTempMonitorTable sensorTempMonitorSystemControl OBJECT-TYPE SYNTAX INTEGER { start(1), shutdown(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative system control status requested by management for the TEMP-MONITOR feature. The value 'start'(1) indicates that TEMP-MONITOR should be supported in the device on all temperature sensors that have this capability (Those shown in sensorTempMonitorTable). The value shutdown(2) indicates that TEMP-MONITOR should be shutdown in the device on all temperature sensors. " DEFVAL { shutdown } ::= { sensorTemp 8 } ------ End group ----------------------------------------------------------------- END