-- ********************************************************************* -- ********************************************************************* -- ** Filename: PRVT-L2TUNNELING-MIB.mib -- ** Project: T - Ethernet and Fast Ethernet IP Switches. -- ** Purpose: Private MIB -- ********************************************************************* -- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved. -- WARNING: -- -- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING: -- -- This file is the property of BATM Advanced Communications. -- BATM Advanced Communications retains all title and -- ownership in the Specification, including any revisions. -- BATM Advanced Communications grants all interested parties a non-exclusive -- license to use and distribute an unmodified copy of this -- Specification in connection with management of BATM Advanced Communications -- and Telco Systems products, and without fee, provided that the following -- conditions are met: -- 1. Redistributions of this specification must retain the above copyright -- notice, this list of conditions and the following disclaimer. -- 2. Redistributions in binary form must reproduce the above copyright -- notice, this list of conditions and the following disclaimer in the -- documentation and/or other materials provided with the distribution. -- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse -- or promote products derived from this specification without specific prior written -- permission. -- -- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED -- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE -- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED -- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES -- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER -- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS -- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR -- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY -- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE. PRVT-L2TUNNELING-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF RowStatus FROM SNMPv2-TC sapBaseInfoEntry, sdpInfoEntry, svcId, sapPortId, sapEncapValue, sdpId FROM PRVT-SERV-MIB serviceAccessSwitch FROM PRVT-QOS-MIB; prvtL2TunnelingMIB MODULE-IDENTITY LAST-UPDATED "200910200000Z" ORGANIZATION "BATM Advanced Communication" CONTACT-INFO " BATM/Telco Systems Support team Email: For North America: techsupport@telco.com For North Europe: support@batm.de, info@batm.de For the rest of the world: techsupport@telco.com" DESCRIPTION "This document is the SNMP MIB module to manage tunneling feature, designed for service providers." -- -- Revision History -- REVISION "200910200000Z" DESCRIPTION "Initial version." ::= { serviceAccessSwitch 3 } -- -------------------------------------------------------------------- -- PRVT-L2TUNNELING-MIB organisation -- -------------------------------------------------------------------- prvtL2TunnNotifications OBJECT IDENTIFIER ::= { prvtL2TunnelingMIB 0 } prvtL2TunnObjects OBJECT IDENTIFIER ::= { prvtL2TunnelingMIB 1 } prvtL2TunnConformance OBJECT IDENTIFIER ::= { prvtL2TunnelingMIB 2 } -- -------------------------------------------------------------------- -- PRVT-L2TUNNELING-MIB Textual Conventions -- -------------------------------------------------------------------- -------------------------------------------------------------- --PRVT-L2TUNNELING objects -------------------------------------------------------------- prvtL2TunnEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable L2Tunneling feature" DEFVAL { disable } ::= { prvtL2TunnObjects 1 } -- prvtL2TunnProfileTable prvtL2TunnProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF PrvtL2TunnProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Table that contain all predefined and defined profiles." ::= { prvtL2TunnObjects 2 } prvtL2TunnProfileEntry OBJECT-TYPE SYNTAX PrvtL2TunnProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table contains a TLS tunneling profile" INDEX {prvtL2TunnProfileName } ::= {prvtL2TunnProfileTable 1} PrvtL2TunnProfileEntry ::= SEQUENCE { prvtL2TunnProfileName OCTET STRING , prvtL2TunnProfileRowStatus RowStatus } prvtL2TunnProfileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(33)) MAX-ACCESS read-create STATUS current DESCRIPTION "TLS profile name. There will be three special profiles that will represent predefined policies: - Discard-All, - Tunnel-BPDUs-only - Tunnel-All. " ::= {prvtL2TunnProfileEntry 1} prvtL2TunnProfileRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "TLS profile rowStatus. It is not possible to modify the predefined profiles." ::= {prvtL2TunnProfileEntry 2} --prvtL2ProtocolsTable prvtL2ProtocolsTable OBJECT-TYPE SYNTAX SEQUENCE OF PrvtL2ProtocolsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contain all predefine and custom defined L2Protocols" ::= { prvtL2TunnObjects 3 } prvtL2ProtocolsEntry OBJECT-TYPE SYNTAX PrvtL2ProtocolsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry is a L2 protocol with the replacement multicast MAC addresses. " INDEX{ prvtL2ProtocolName } ::= {prvtL2ProtocolsTable 1} PrvtL2ProtocolsEntry ::= SEQUENCE{ prvtL2ProtocolName OCTET STRING, prvtL2ProtocolEthertype Integer32, prvtL2ProtocolMAC OCTET STRING, prvtL2ReplaceMAC OCTET STRING, prvtL2ProtocolRowStatus RowStatus } prvtL2ProtocolName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (17)) MAX-ACCESS read-create STATUS current DESCRIPTION "L2 Protocol Name. There will the follow default protocol: - xSTP - LACP/LAMP - Link OAM (802.3ah) - Port Authentication (802.1x) - E-LMI - LLDP - All other bridge block of protocols - All Bridges - GARP Block of Protocols - Provider Bridge STP." ::= {prvtL2ProtocolsEntry 1} prvtL2ProtocolEthertype OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Protocol Ethertype." ::= {prvtL2ProtocolsEntry 2} prvtL2ProtocolMAC OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "The protocol Multicast MAC address used for PDU distribution. " ::= {prvtL2ProtocolsEntry 3} prvtL2ReplaceMAC OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "Replacement multicast MAC addresses." ::= {prvtL2ProtocolsEntry 4} prvtL2ProtocolRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "prvtL2CustomProtocols RowStatus used for CREATE/DELETE the custom protocols. It is not possible to modify the predefined protocols." ::= {prvtL2ProtocolsEntry 5} --prvtL2TunnProfMapProtoTable prvtL2TunnProfMapProtoTable OBJECT-TYPE SYNTAX SEQUENCE OF PrvtL2TunnProfMapProtoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Table that contain actions configured for each L2 protcol per TLS tunneling profile." ::= { prvtL2TunnObjects 4 } prvtL2TunnProfMapProtoEntry OBJECT-TYPE SYNTAX PrvtL2TunnProfMapProtoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table contain th action for specified profile and L2 protocol" INDEX {prvtL2TunnProfileName, prvtL2ProtocolName } ::= {prvtL2TunnProfMapProtoTable 1} PrvtL2TunnProfMapProtoEntry ::= SEQUENCE{ prvtL2TunnAction INTEGER } prvtL2TunnAction OBJECT-TYPE SYNTAX INTEGER{ tunnel (1), discard (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Define action discard/tunnel per TLS tunneled protocol " DEFVAL { discard } ::= {prvtL2TunnProfMapProtoEntry 1} --prvtL2TunnSAPPointsTable prvtL2TunnSAPPointsTable OBJECT-TYPE SYNTAX SEQUENCE OF PrvtL2TunnSAPPointsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Table that contain an assigment of a profile to a SAP." ::= { prvtL2TunnObjects 5 } prvtL2TunnSAPPointsEntry OBJECT-TYPE SYNTAX PrvtL2TunnSAPPointsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table contain information about the map between SAP and L2Tunneling profile." AUGMENTS { sapBaseInfoEntry } ::= { prvtL2TunnSAPPointsTable 1 } PrvtL2TunnSAPPointsEntry ::= SEQUENCE{ profileSAP OCTET STRING } profileSAP OBJECT-TYPE SYNTAX OCTET STRING (SIZE(33)) MAX-ACCESS read-write STATUS current DESCRIPTION "Profile Id associated to a SAP point. Setting this object with an empty string will disable the profile." ::= {prvtL2TunnSAPPointsEntry 1} --prvtL2TunnSDPPointsTable prvtL2TunnSDPPointsTable OBJECT-TYPE SYNTAX SEQUENCE OF PrvtL2TunnSDPPointsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Table that contain an assigment of a profile to a SDP." ::= { prvtL2TunnObjects 6 } prvtL2TunnSDPPointsEntry OBJECT-TYPE SYNTAX PrvtL2TunnSDPPointsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table contain information about the map between SDP and L2Tunneling profile." AUGMENTS { sdpInfoEntry } ::= { prvtL2TunnSDPPointsTable 1 } PrvtL2TunnSDPPointsEntry ::= SEQUENCE{ profileSDP OCTET STRING } profileSDP OBJECT-TYPE SYNTAX OCTET STRING (SIZE(33)) MAX-ACCESS read-write STATUS current DESCRIPTION "Profile Id associated to an SDP point. Setting this object with an empty string will disable the profile." ::= {prvtL2TunnSDPPointsEntry 1} prvtL2TunnClearStatistics OBJECT-TYPE SYNTAX INTEGER { none(0), clear(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Clear L2Tunneling statistics for each tunneling point" DEFVAL { none } ::= { prvtL2TunnObjects 7 } --prvtL2TunnSapStatisticsTable prvtL2TunnSapStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF PrvtL2TunnSapStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Table that provide statistics for each tunneling point per protocol." ::= { prvtL2TunnObjects 8 } prvtL2TunnSapStatisticsEntry OBJECT-TYPE SYNTAX PrvtL2TunnSapStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table contain the number of SAP tunneling RX and TX packets ." INDEX {svcId, sapPortId, sapEncapValue, prvtL2ProtocolName} ::= { prvtL2TunnSapStatisticsTable 1 } PrvtL2TunnSapStatisticsEntry ::= SEQUENCE{ l2TunnSapRxPackets Counter32, l2TunnSapTxPackets Counter32 } l2TunnSapRxPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of SAP Rx L2Tunneling packets" ::= { prvtL2TunnSapStatisticsEntry 1} l2TunnSapTxPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of SAP Tx L2Tunneling packets" ::= { prvtL2TunnSapStatisticsEntry 2} --prvtL2TunnSdpStatisticsTable prvtL2TunnSdpStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF PrvtL2TunnSdpStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Table that provide statistics for each tunneling point per protocol." ::= { prvtL2TunnObjects 9 } prvtL2TunnSdpStatisticsEntry OBJECT-TYPE SYNTAX PrvtL2TunnSdpStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table contain the number of SDP tunneling RX and TX packets ." INDEX {svcId, sdpId , prvtL2ProtocolName } ::= { prvtL2TunnSdpStatisticsTable 1 } PrvtL2TunnSdpStatisticsEntry ::= SEQUENCE{ l2TunnSdpRxPackets Counter32, l2TunnSdpTxPackets Counter32 } l2TunnSdpRxPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of SDP Rx L2Tunneling packets" ::= { prvtL2TunnSdpStatisticsEntry 1} l2TunnSdpTxPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of SDP Tx L2Tunneling packets" ::= { prvtL2TunnSdpStatisticsEntry 2} -- ---------------------------------------------------------------------------- -- Conformance Information -- ---------------------------------------------------------------------------- prvtL2TunnCompliances OBJECT IDENTIFIER ::= { prvtL2TunnConformance 1 } prvtL2TunnGroups OBJECT IDENTIFIER ::= { prvtL2TunnConformance 2 } -- compliance statements prvtL2TunnCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for L2Tunneling." MODULE -- this module MANDATORY-GROUPS { prvtL2TunnProtocolGroup, prvtL2TunnProfileGroup, prvtL2TunnPointGroup } ::= { prvtL2TunnCompliances 1 } prvtL2TunnProtocolGroup OBJECT-GROUP OBJECTS {prvtL2ProtocolName, prvtL2ReplaceMAC, prvtL2ProtocolEthertype, prvtL2ProtocolMAC, prvtL2ReplaceMAC, prvtL2ProtocolRowStatus } STATUS current DESCRIPTION "The group of objects regarding Layer 2 protocol with a special MAC address ." ::= { prvtL2TunnGroups 1 } prvtL2TunnProfileGroup OBJECT-GROUP OBJECTS { prvtL2TunnEnable, prvtL2TunnProfileName, prvtL2TunnProfileRowStatus } STATUS current DESCRIPTION "The group of objects used to configure a L2Tunneling profile ." ::= { prvtL2TunnGroups 2 } prvtL2TunnPointGroup OBJECT-GROUP OBJECTS {prvtL2TunnAction, profileSDP, profileSAP, l2TunnSapRxPackets, l2TunnSapTxPackets, l2TunnSdpRxPackets, l2TunnSdpTxPackets } STATUS current DESCRIPTION "The group of objects used L2Tunneling point ." ::= { prvtL2TunnGroups 3 } END