-- ********************************************************************* -- ** -- ** BATM Advanced Communications. -- ** -- ********************************************************************* -- ** Filename: PRVT-MPLS-IF-MIB.mib -- ** Project: T-Metro Switches. -- ** Purpose: Private MIB -- ********************************************************************* -- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved. -- WARNING: -- -- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING: -- -- This file is the property of BATM Advanced Communications and contains -- proprietary and confidential information. This file is made -- available to authorized BATM customers on the express -- condition that neither it, nor any of the information contained -- therein, shall be disclosed to third parties or be used for any -- purpose other than to replace, modify or upgrade firmware and/or -- software components of BATM manufactured equipment within the -- authorized customer's network, and that such transfer be -- completed in accordance with the instructions provided by -- BATM. Any other use is strictly prohibited. -- -- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED -- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE -- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED -- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES -- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -- -- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER -- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS -- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR -- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY -- TO USE, THE SOFTWARE CONTAINED IN THIS FILE. -- -- ---------------------------------------------------------------------------- -- PRVT-MPLS-IF-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE,Integer32, Unsigned32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, RowStatus, TruthValue FROM SNMPv2-TC ifIndex,ifEntry FROM IF-MIB InetAddress FROM INET-ADDRESS-MIB mpls FROM PRVT-CR-LDP-MIB; prvtMPLSIfMib MODULE-IDENTITY LAST-UPDATED "200801010000Z" ORGANIZATION "BATM Advanced Communication" CONTACT-INFO " BATM/Telco Systems Support team Email: For North America: techsupport@telco.com For North Europe: support@batm.de, info@batm.de For the rest of the world: techsupport@telco.com" DESCRIPTION "This module includes configuration parameters for MPLS and RSVP interface specific parameters." -- revision history REVISION "200801010000Z" DESCRIPTION "Removed redefined OIDs in private vendor extension definitions." REVISION "200701230000Z" DESCRIPTION "Changed ifaceRsvpHelloTolerance, ifaceRsvpHelloPersist to Unsigned32." REVISION "200606270000Z" DESCRIPTION "Changes the ingress and egress label ranges." REVISION "200601080000Z" DESCRIPTION "Added the global label space object and changed augmentation to ifTable." REVISION "200511110000Z" DESCRIPTION "Initial version." ::= { mpls 6 } -- -------------------------------------------------------------------- -- PRVT-MPLS-MIB organisation -- -------------------------------------------------------------------- prvtMPLSIfaceObjs OBJECT IDENTIFIER ::= { prvtMPLSIfMib 1} prvtMPLSRouteObjs OBJECT IDENTIFIER ::= { prvtMPLSIfMib 2} -- ----------------------------------------------------------------------------- -- Interface objects -- ----------------------------------------------------------------------------- prvtMplsIfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF PrvtMplsIfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains object for configuring MPLS and LDP interface specific parameters." ::= { prvtMPLSIfaceObjs 1 } prvtMplsIfaceEntry OBJECT-TYPE SYNTAX PrvtMplsIfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MPLS/LDP configuration of an IP interface." INDEX { ifIndex } ::= { prvtMplsIfaceTable 1 } PrvtMplsIfaceEntry ::= SEQUENCE { ifaceMplsEnable TruthValue, ifaceMplsPHPEnable TruthValue, ifaceMplsIngressLblRangeLow Integer32, ifaceMplsIngressLblRangeHigh Integer32, ifaceMplsEgressLblRangeLow Integer32, ifaceMplsEgressLblRangeHigh Integer32, ifaceMplsLdpHelloHoldTimer Integer32, ifaceMplsLdpKeepaliveHoldTimer Integer32, ifaceMplsLdpUseGlobalLabelSpace TruthValue } ifaceMplsEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable MPLS on this interface." ::= { prvtMplsIfaceEntry 1 } ifaceMplsPHPEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable Penultimate Hop Popping on this interface." ::= { prvtMplsIfaceEntry 2 } ifaceMplsIngressLblRangeLow OBJECT-TYPE SYNTAX Integer32 (32768..131071) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the lower border of the Ingress Lable Range for this interface." ::= { prvtMplsIfaceEntry 3 } ifaceMplsIngressLblRangeHigh OBJECT-TYPE SYNTAX Integer32 (32768..131071) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the higher border of the Ingress Lable Range for this interface." ::= { prvtMplsIfaceEntry 4 } ifaceMplsEgressLblRangeLow OBJECT-TYPE SYNTAX Integer32 (32768..131071) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the lower border of the Egress Lable Range for this interface." ::= { prvtMplsIfaceEntry 5 } ifaceMplsEgressLblRangeHigh OBJECT-TYPE SYNTAX Integer32 (32768..131071) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the higher border of the Egress Lable Range for this interface." ::= { prvtMplsIfaceEntry 6 } ifaceMplsLdpHelloHoldTimer OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "LDP Hello Hold Time." ::= { prvtMplsIfaceEntry 7 } ifaceMplsLdpKeepaliveHoldTimer OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "LDP Hello Keep-alive Time." ::= { prvtMplsIfaceEntry 8 } ifaceMplsLdpUseGlobalLabelSpace OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Default value is true and correct value is true." ::= { prvtMplsIfaceEntry 9 } prvtRsvpIfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF PrvtRsvpIfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains object for configuring RSVP interface specific parameters." ::= { prvtMPLSIfaceObjs 2 } prvtRsvpIfaceEntry OBJECT-TYPE SYNTAX PrvtRsvpIfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MPLS/LDP configuration of an IP interface." AUGMENTS { ifEntry } ::= { prvtRsvpIfaceTable 1 } PrvtRsvpIfaceEntry ::= SEQUENCE { ifaceRsvpRefreshInterval Integer32, ifaceRsvpRefreshMultiple Integer32, ifaceRsvpSlewNumerator Integer32, ifaceRsvpSlewDenom Integer32, ifaceRsvpBlockadeMultiple Integer32, ifaceRsvpNotifyRRDecay Integer32, ifaceRsvpNotifyRRInterval Integer32, ifaceRsvpNotifyRRLimit Integer32, ifaceRsvpHelloInterval Integer32, ifaceRsvpHelloDecay Integer32, ifaceRsvpHelloTolerance Unsigned32, ifaceRsvpHelloPersist Unsigned32, ifaceRsvpHelloTTL Integer32 } ifaceRsvpRefreshInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The RSVP value, R, which is used to set the average interval between refresh path and resv messages." ::= { prvtRsvpIfaceEntry 1 } ifaceRsvpRefreshMultiple OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The RSVP value, K, which is the number of unresponded Path or Resv refresh attempts which must be made, spaced by the refresh interval before the state is deemed to have timed out." ::= { prvtRsvpIfaceEntry 2} ifaceRsvpSlewNumerator OBJECT-TYPE SYNTAX Integer32 (1..214783647) MAX-ACCESS read-write STATUS current DESCRIPTION "The numerator of the fraction, SlewMax, which is the maximum allowable increase in the refresh interval, R, to prevent state timeout while changing R. R is increased by this fraction until it reaches the new desired value." ::= { prvtRsvpIfaceEntry 3 } ifaceRsvpSlewDenom OBJECT-TYPE SYNTAX Integer32 (1..214783647) MAX-ACCESS read-write STATUS current DESCRIPTION "The denominator of the fraction, SlewMax, which is the maximum allowable increase in the refresh interval, R, to prevent state timeout while changing R. R is increased by this fraction until it reaches the new desired value." ::= { prvtRsvpIfaceEntry 4 } ifaceRsvpBlockadeMultiple OBJECT-TYPE SYNTAX Integer32 (1..214783647) MAX-ACCESS read-write STATUS current DESCRIPTION "The RSVP value, Kb, which is the number of refresh timeout periods after which blockade state is deleted." ::= { prvtRsvpIfaceEntry 5 } ifaceRsvpNotifyRRDecay OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "The percentage increase in the rapid retransmission interval for each consecutive unacknowledged RSVP Notify message. A value of 0 indicates a constant retransmission rate." ::= { prvtRsvpIfaceEntry 6} ifaceRsvpNotifyRRInterval OBJECT-TYPE SYNTAX Integer32 (1..214783647) MAX-ACCESS read-write STATUS current DESCRIPTION "The interval in milliseconds before a Notify message is first resent if no acknowledgement is received." ::= { prvtRsvpIfaceEntry 7 } ifaceRsvpNotifyRRLimit OBJECT-TYPE SYNTAX Integer32 (1..214783647) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of times a Notify message is resent if no acknowledgement is received." ::= { prvtRsvpIfaceEntry 8 } ifaceRsvpHelloInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The interval between sending consecutive Hello messages." ::= { prvtRsvpIfaceEntry 9 } ifaceRsvpHelloDecay OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Percentage increase of hello interval after each Hello message sent when the hello session with the neighbor has timed out." ::= { prvtRsvpIfaceEntry 10} ifaceRsvpHelloTolerance OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The number of hello periods which may pass without receiving a successful Hello message from a partner before the Hello session times out." ::= { prvtRsvpIfaceEntry 11 } ifaceRsvpHelloPersist OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The number of hello periods which may pass after the Hello session times out before Hello messages cease." ::= { prvtRsvpIfaceEntry 12 } ifaceRsvpHelloTTL OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The Time To Live that will be set in the IP header of all Hello packets sent to the neighbor associated with this interface." ::= { prvtRsvpIfaceEntry 13 } prvtMplsRouteProtocolTable OBJECT-TYPE SYNTAX SEQUENCE OF PrvtMplsRouteProtocolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains for configuring the egress and ingress routes for LDP label packets. It supports all CLI route types - bgp, isis, ospf, rip, static, kernel and connected." ::= { prvtMPLSRouteObjs 1 } prvtMplsRouteProtocolEntry OBJECT-TYPE SYNTAX PrvtMplsRouteProtocolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table represents the configuration of a particular route type for ingress or egress." INDEX { prvtMplsRouteDirection, prvtMplsRouteType } ::= { prvtMplsRouteProtocolTable 1 } PrvtMplsRouteProtocolEntry ::= SEQUENCE { prvtMplsRouteDirection INTEGER, prvtMplsRouteType INTEGER, prvtMplsRouteRowStatus RowStatus } prvtMplsRouteDirection OBJECT-TYPE SYNTAX INTEGER { ingress(1), egress(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The direction of the route that will be used to receive or send LDP packets." ::= { prvtMplsRouteProtocolEntry 1 } prvtMplsRouteType OBJECT-TYPE SYNTAX INTEGER { bgp(1), connected(2), isis(3), kernel(4), ospf(5), rip(6), static(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the route which will be used to send or receive LDP packets." ::= { prvtMplsRouteProtocolEntry 2} prvtMplsRouteRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create an entry in the table. Only createAndGo(4) should be used." ::= { prvtMplsRouteProtocolEntry 3 } prvtMplsRouteAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF PrvtMplsRouteAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains for configuring the egress and ingress routes for LDP label packets. It supports all CLI route types - bgp, isis, ospf, rip, static, kernel and connected." ::= { prvtMPLSRouteObjs 2 } prvtMplsRouteAddressEntry OBJECT-TYPE SYNTAX PrvtMplsRouteAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table represents the configuration of a particular route type for ingress or egress." INDEX { prvtMplsAddressDirection, prvtMplsAddressIPAddr, prvtMplsAddressMask } ::= { prvtMplsRouteAddressTable 1 } PrvtMplsRouteAddressEntry ::= SEQUENCE { prvtMplsAddressDirection INTEGER, prvtMplsAddressIPAddr InetAddress, prvtMplsAddressMask Integer32, prvtMplsAddressRowStatus RowStatus } prvtMplsAddressDirection OBJECT-TYPE SYNTAX INTEGER { ingress(1), egress(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The direction of the route that will be used to receive or send LDP packets." ::= { prvtMplsRouteAddressEntry 1 } prvtMplsAddressIPAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the route that will be used to send or receive LDP packets." ::= { prvtMplsRouteAddressEntry 2} prvtMplsAddressMask OBJECT-TYPE SYNTAX Integer32(0..32) MAX-ACCESS read-only STATUS current DESCRIPTION "The mask for the IP address of the route that will be used to send or receive LDP packets." ::= { prvtMplsRouteAddressEntry 3} prvtMplsAddressRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create an entry in the table. Only createAndGo(4) should be used." ::= { prvtMplsRouteAddressEntry 4 } END