-- ********************************************************************* -- ********************************************************************* -- ** Filename: PRVT-PW-TDM-MIB -- ** Project: T - Ethernet and Fast Ethernet IP Switches. -- ** Purpose: Private MIB -- ********************************************************************* -- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved. -- WARNING: -- -- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING: -- -- This file is the property of BATM Advanced Communications. -- BATM Advanced Communications retains all title and -- ownership in the Specification, including any revisions. -- BATM Advanced Communications grants all interested parties a non-exclusive -- license to use and distribute an unmodified copy of this -- Specification in connection with management of BATM Advanced Communications -- and Telco Systems products, and without fee, provided that the following -- conditions are met: -- 1. Redistributions of this specification must retain the above copyright -- notice, this list of conditions and the following disclaimer. -- 2. Redistributions in binary form must reproduce the above copyright -- notice, this list of conditions and the following disclaimer in the -- documentation and/or other materials provided with the distribution. -- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse -- or promote products derived from this specification without specific prior written -- permission. -- -- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED -- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE -- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED -- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES -- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER -- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS -- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR -- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY -- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE. PRVT-PW-TDM-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, Unsigned32, Gauge32, IpAddress FROM SNMPv2-SMI MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP FROM SNMPv2-CONF TEXTUAL-CONVENTION, TruthValue, RowStatus, StorageType, TimeStamp FROM SNMPv2-TC NOTIFICATION-TYPE, transmission FROM SNMPv2-SMI -- [RFC2578] InterfaceIndexOrZero FROM IF-MIB PerfCurrentCount, PerfIntervalCount FROM PerfHist-TC-MIB PortList FROM Q-BRIDGE-MIB switch FROM PRVT-SWITCH-MIB; -- The TDM MIB prvtPwVcTDMMIB MODULE-IDENTITY LAST-UPDATED "200907070000Z" ORGANIZATION "BATM Advanced Communication" CONTACT-INFO "BATM/Telco Systems Support team Email: For North America: techsupport@telco.com For North Europe: support@batm.de, info@batm.de For the rest of the world: techsupport@telco.com" DESCRIPTION "This MIB contains managed object definitions for encapsulating TDM (T1,E1, T3, E3, NxDS0) as pseudo-wires over packet-switching networks (PSN)." -- revision history REVISION "201902270000Z" DESCRIPTION "Update interval values for : prvtPwVcTDMCfgPeerPort prvtPwVcTDMCfgLocalPort prvtPwVcTDMCfgOosPort prvtPwVcTDMCfgPeerOosPort" REVISION "200907070000Z" DESCRIPTION "Change the range for prvtPwVcTDMCfgChannelGroup in order to support all configurable channels group for OC3 module" REVISION "200907010000Z" DESCRIPTION "Added prvtPwVcTDMCfgRtpOosPayload and prvtPwVcTDMCfgRtpPayload objects." REVISION "200903060000Z" DESCRIPTION "Added MPLS objects." REVISION "200903050000Z" DESCRIPTION "Added Destination Oos Port " REVISION "200902180000Z" DESCRIPTION "Added prvtPwVcTDMCfgIpTos, prvtPwVcTDMCfgIpOosTos" REVISION "200901150000Z" DESCRIPTION "Added prvtPwVcTDMCfgInterface, prvtTDMChannelGrpOC3TimeSlots" REVISION "200806190000Z" DESCRIPTION "Added prvtPwVcTDMClearCircuitStatistics, prvtPwVcTDMCfgRtp, prvtPwVcTDMCfgOosPort, prvtPwVcTDMCfgPayloadSuppression" REVISION "200607240000Z" DESCRIPTION "Added Oos Ecid and Vlan priotity objects." ::= { prvtPwVc 2 } prvtPwVc OBJECT IDENTIFIER ::= { switch 200 } -- Local Textual conventions PrvtPwVcTDMCfgIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Index into any of the relevant prvtPwVcXXXCfgTable." SYNTAX Unsigned32 TimeSlotList ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Each octet within this value specifies a time slot included in the give channel group. There should be 32 bits of 4 octets for each port of the CES module. Note that if the line type is set to T1 only the first 24 bits of each 4 octests can be set. The most significant bit of the list indicates timeslot 1 of port 1, the 33th bit - timeslot 1 of port 2, etc. If the bit is set, the port is included in the given channel group." SYNTAX OCTET STRING PrvtPwVcTDMCfgInterface ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Interface of the given circuit used in TDM config for OC3 modules " SYNTAX IpAddress InterfaceTimeSlot ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The first 4 octets of this value represent the interface of the given channel group P.K.L.M.The last 32 bits of the 4 octets represent a bitmask of the time slots" SYNTAX OCTET STRING -- Tables, Scalars prvtPwVcTDMObjects OBJECT IDENTIFIER ::= { prvtPwVcTDMMIB 1 } -- Notifications prvtPwVcTDMTraps OBJECT IDENTIFIER ::= { prvtPwVcTDMMIB 2 } -- Conformance prvtPwVcTDMConformance OBJECT IDENTIFIER ::= { prvtPwVcTDMMIB 3 } -- TDM PW table prvtPwVcTDMTable OBJECT-TYPE SYNTAX SEQUENCE OF PrvtPwVcTDMEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains basic information including ifIndex, and pointers to entries in the relevant TDM config tables for this TDM PW." ::= { prvtPwVcTDMObjects 1 } prvtPwVcTDMEntry OBJECT-TYPE SYNTAX PrvtPwVcTDMEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is indexed by the same index that was created for the associated entry in the PW Table (in the PW-STD-MIB). An entry is created in this table by the agent for every entry in the prvtPwVcTable with a prvtPwVcType of 'TDM'." INDEX { prvtPwVcTDMModuleId, prvtPwVcTDMCircuitId } ::= { prvtPwVcTDMTable 1 } PrvtPwVcTDMEntry ::= SEQUENCE { prvtPwVcTDMModuleId INTEGER, prvtPwVcTDMCircuitId INTEGER, prvtPwVcTDMType INTEGER, prvtPwVcRelTDMCfgIndex PrvtPwVcTDMCfgIndex, prvtPwVcTDMTimeElapsed Integer32, prvtPwVcTDMValidIntervals Integer32, prvtPwVcTDMCurrentIndications BITS, prvtPwVcTDMLatchedIndications BITS, prvtPwVcTDMLastEsTimeStamp TimeStamp, prvtPwVcTDMEmulationMode INTEGER, prvtPwVcTDMOperStatus INTEGER, prvtPwVcTDMClearCircuitStatistics INTEGER } prvtPwVcTDMModuleId OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The ID of the CES Module where the crcuit is configured. " ::= { prvtPwVcTDMEntry 1 } prvtPwVcTDMCircuitId OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The ID of the CES Circuit that this PW represents. " ::= { prvtPwVcTDMEntry 2 } prvtPwVcTDMType OBJECT-TYPE SYNTAX INTEGER { other (1), ds1 (2), e1 (3), ds3 (4), e3 (5), octetAlignedT1 (6), nXds0 (7), nXds0WithCASe1 (8), nXds0WithCASds1Esf (9), nXds0WithCASds1Sf (10) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the type of TDM PW. The connection assumed to be symmetrical having the same value at both ends. To identify structured vs. unstructured type for DS1 and E1, dsx1LineType and dsx1SignalMode [DS1MIB] should be referenced. DS3 and E3 are always unstructured. " DEFVAL { e1 } ::= { prvtPwVcTDMEntry 3 } prvtPwVcRelTDMCfgIndex OBJECT-TYPE SYNTAX PrvtPwVcTDMCfgIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Index to the relevant TDM configuration table entry that appears in one of the related MIB modules such as SAToP,TDMoIP or CESoPSN. It is likely that multiple TDM PWs of the same characteristic will share a single configuration entry of the relevant type." ::= { prvtPwVcTDMEntry 4 } prvtPwVcTDMTimeElapsed OBJECT-TYPE SYNTAX Integer32 (1..900) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds, including partial seconds, that have elapsed since the beginning of the current measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value." ::= { prvtPwVcTDMEntry 5} prvtPwVcTDMValidIntervals OBJECT-TYPE SYNTAX Integer32 (0..96) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of previous 15-minute intervals for which data was collected. An agent with TDM capability must be capable of supporting at least n intervals. The minimum value of n is 4, The default of n is 32 and the maximum value of n is 96. The value will be unless the measurement was (re-) started within the last (*15) minutes, in which case the value will be the number of complete 15 minute intervals for which the agent has at least some data. In certain cases(e.g., in the case where the agent is a proxy) it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available. " ::= { prvtPwVcTDMEntry 6} prvtPwVcTDMCurrentIndications OBJECT-TYPE SYNTAX BITS { other ( 0), strayPacket ( 1), malformedPacket ( 2), excessivePktLossRate( 3), bufferOverrun ( 4), bufferUnderrun ( 5), remotePktLoss ( 6), packetLoss ( 7), tdmFault ( 8), packetsLbitCounter ( 9), packetsRbitCounter (10) } MAX-ACCESS read-only STATUS current DESCRIPTION "The following defects should be detected and reported upon request: -Stray packets MAY be detected by the PSN and multiplexing layers. Stray packets MUST be discarded by the CE-bound IWF and their detection MUST NOT affect mechanisms for detection of packet loss. -Malformed packets are detected by mismatch between the expected packet size (taking the value of the L bit into account) and the actual packet size inferred from the PSN and multiplexing layers. Malformed in-order packets MUST be discarded by the CE-bound IWF and replacement data generated as for lost packets. -Excessive packet loss rate is detected by computing the average packet loss rate over the value of prvtPwVcTDMAvePktLossTimeWindow and comparing it with a preconfigured threshold [SATOP]. -Buffer overrun is detected in the normal operation state when the CE bound IWF's jitter buffer cannot accommodate newly arrived packets. -Remote packet loss is indicated by reception of packets with their R bit set. -Packet misorder is detected by looking at the Sequence number provided by the control word. -TDM Fault, if L bit in the control word is set, it indicates that TDM data carried in the payload is invalid due an attachment circuit fault. When the L bit is set the payload MAY be omitted in order to conserve bandwidth. Note: the algorithm used to capture these indications is implementation specific." ::= { prvtPwVcTDMEntry 7} prvtPwVcTDMLatchedIndications OBJECT-TYPE SYNTAX BITS { other ( 0), staryPacket ( 1), malformedPacket ( 2), excessivePktLossRate( 3), bufferOverrun ( 4), bufferUnderrun ( 5), remotePktLoss ( 6), packetLoss ( 7), tdmFault ( 8), packetsLbitCounter ( 9), packetsRbitCounter (10) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of TDM indicators when the TDM PW last declared an error second (either as ES, SES or a second with errors inside a UAS) condition. At this time, only LOPS can create a failure. Since indicators other than LOPS are useful, all are latched here. For bit definitions, see prvtPwVcTDMCurrentIndications above. Note: the algorithm used to latch these indications when entering an defect state is implementation specific." ::= { prvtPwVcTDMEntry 8} prvtPwVcTDMLastEsTimeStamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime on the most recent occasion at which the TDM PW entered the ES or SES state." ::= { prvtPwVcTDMEntry 9} prvtPwVcTDMEmulationMode OBJECT-TYPE SYNTAX INTEGER { undefined ( 0), structured ( 1), unstuctured ( 2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The circuit emulation mode." ::= {prvtPwVcTDMEntry 10 } prvtPwVcTDMOperStatus OBJECT-TYPE SYNTAX INTEGER { up (1), down (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status of the circuit." ::= {prvtPwVcTDMEntry 11 } prvtPwVcTDMClearCircuitStatistics OBJECT-TYPE SYNTAX INTEGER { none ( 0 ), clear ( 1 ) } MAX-ACCESS read-write STATUS current DESCRIPTION "Clear circuit statistics." ::= {prvtPwVcTDMEntry 12 } -- End of TDM PW table -- PW Generic TDM PW Configuration Table prvtPwVcTDMCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF PrvtPwVcTDMCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains a set of parameters that may be referenced by one or more TDM PWs in prvtPwVcTDMTable." ::= { prvtPwVcTDMObjects 3 } prvtPwVcTDMCfgEntry OBJECT-TYPE SYNTAX PrvtPwVcTDMCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "These parameters define the characteristics of a TDM PW. They are grouped here to ease NMS burden. Once an entry is created here it may be re-used by many PWs." INDEX { prvtPwVcTDMModuleId,prvtPwVcTDMCircuitId } ::= { prvtPwVcTDMCfgTable 1 } PrvtPwVcTDMCfgEntry ::= SEQUENCE { prvtPwVcTDMCfgPayloadSize Unsigned32, prvtPwVcTDMCfgPktReorder TruthValue, prvtPwVcTDMCfgRtpHdrUsed TruthValue, prvtPwVcTDMCfgJtrBfrDepth Unsigned32, prvtPwVcTDMCfgChannelGroup INTEGER, prvtPwVcTDMCfgPorts OCTET STRING, prvtPwVcTDMCfgPeerIpType INTEGER, prvtPwVcTDMCfgPeerIpAddress IpAddress, prvtPwVcTDMCfgPeerPort INTEGER, prvtPwVcTDMCfgPeerMAC OCTET STRING, prvtPwVcTDMCfgPeerEcid INTEGER, prvtPwVcTDMCfgPeerOosEcid INTEGER, prvtPwVcTDMCfgVlanId INTEGER, prvtPwVcTDMCfgVlanPrio INTEGER, prvtPwVcTDMCfgLocalPort INTEGER, prvtPwVcTDMCfgEcid INTEGER, prvtPwVcTDMCfgOosEcid INTEGER, prvtPwVcTDMCfgProtocol INTEGER, prvtPwVcTDMCfgAdminStatus INTEGER, prvtPwVcTDMCfgRowStatus RowStatus, prvtPwVcTDMCfgRtp INTEGER, prvtPwVcTDMCfgOosPort Unsigned32, prvtPwVcTDMCfgPayloadSuppression INTEGER, prvtPwVcTDMCfgInterface PrvtPwVcTDMCfgInterface, prvtPwVcTDMCfgIpTos INTEGER, prvtPwVcTDMCfgIpOosTos INTEGER, prvtPwVcTDMCfgPeerOosPort INTEGER, prvtPwVcTDMCfgMplsLocalLabel Unsigned32, prvtPwVcTDMCfgMplsPeerLabel Unsigned32, prvtPwVcTDMCfgMplsTTL INTEGER, prvtPwVcTDMCfgMplsExp INTEGER, prvtPwVcTDMCfgMplsOosLocalLabel Unsigned32, prvtPwVcTDMCfgMplsOosPeerLabel Unsigned32, prvtPwVcTDMCfgMplsOosTTL INTEGER, prvtPwVcTDMCfgMplsOosExp INTEGER , prvtPwVcTDMCfgRtpOosPayload INTEGER, prvtPwVcTDMCfgRtpPayload INTEGER } prvtPwVcTDMCfgPayloadSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object indicates the PayLoad Size to be defined during the PW setUp. Upon TX, implementation must be capable of carrying that amount of data. Upon RX, When the LEN field is set to 0, the payload of packet MUST assume this size, and if the actual packet size is inconsistent with this length, the packet MUST be considered to be malformed. " ::= { prvtPwVcTDMCfgEntry 1 } prvtPwVcTDMCfgPktReorder OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If set True: as CE bound packets are queued in the jitter buffer, out of order packets are re-ordered. The maximum sequence number differential (i.e., the range in which re-sequencing can occur) is dependant on the depth of the jitter buffer. See prvtPwVcTDMCfgJtrBfrDepth. NOTE: Some implementations may not support this feature. The agent is then required to set this False." ::= { prvtPwVcTDMCfgEntry 2 } prvtPwVcTDMCfgRtpHdrUsed OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If set False: an RTP header is not pre-pended to the TDM packet." REFERENCE "See [SATOP]" DEFVAL { false } ::= { prvtPwVcTDMCfgEntry 3 } prvtPwVcTDMCfgJtrBfrDepth OBJECT-TYPE SYNTAX Unsigned32 (1..200) UNITS "millisecond" MAX-ACCESS read-create STATUS current DESCRIPTION "The size of the Jitter buffer SHOULD be defined to a value that is capable to allow accommodation to the PSN-specific packet delay variation. If configured to a value not supported by the implementation, the agent MUST return an error code 'jtrBfrDepth' in 'prvtPwVcTDMConfigError ' NOTE: jitter buffers are a limited resource to be managed." DEFVAL { 3 } ::= { prvtPwVcTDMCfgEntry 4 } prvtPwVcTDMCfgChannelGroup OBJECT-TYPE SYNTAX INTEGER (1..128) MAX-ACCESS read-create STATUS current DESCRIPTION "The circuit's channel group. This object is only valid if structured emulation mode is used. If a group is not set the value of the object is 0." ::= { prvtPwVcTDMCfgEntry 5 } prvtPwVcTDMCfgPorts OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "A bitmap of themodule's TDM ports belongng to the circuit. " ::= { prvtPwVcTDMCfgEntry 6 } prvtPwVcTDMCfgPeerIpType OBJECT-TYPE SYNTAX INTEGER { ipv4(4), ipv6(6), dns(16) } MAX-ACCESS read-create STATUS current DESCRIPTION "The type of the peer's IP address. " ::= { prvtPwVcTDMCfgEntry 7 } prvtPwVcTDMCfgPeerIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The peer's IP address. " ::= { prvtPwVcTDMCfgEntry 8 } prvtPwVcTDMCfgPeerPort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The connection port. " ::= { prvtPwVcTDMCfgEntry 9 } prvtPwVcTDMCfgPeerMAC OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "The Peer MAC address. This object is only valid for Metro-Ethernet and Mpls circuits. If an IP address is configured for the circuit, this object will display the resolved MAC address." ::= { prvtPwVcTDMCfgEntry 10 } prvtPwVcTDMCfgPeerEcid OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "The peer circuit identifier. This object is only valid if the Circuit protocol is metro-ethernet. " ::= { prvtPwVcTDMCfgEntry 11 } prvtPwVcTDMCfgPeerOosEcid OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "The peer circuit identifier for the out-of-band signaling. This value is valid only when the object prvtPwVcTDMCfgEcid is set and when the current protocol is metro-ethernet" ::= { prvtPwVcTDMCfgEntry 12 } prvtPwVcTDMCfgVlanId OBJECT-TYPE SYNTAX INTEGER (2..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "The circuit Vlan ID. " ::= { prvtPwVcTDMCfgEntry 13 } prvtPwVcTDMCfgVlanPrio OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "The prioirty for the VLAN set here, when the protocol for the circuit is metro-ethernet" ::= { prvtPwVcTDMCfgEntry 14 } prvtPwVcTDMCfgLocalPort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Local UDP port. " ::= { prvtPwVcTDMCfgEntry 15 } prvtPwVcTDMCfgEcid OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "The local circuit identifier. This object is only valid if the Circuit protocol is metro-ethernet. " ::= { prvtPwVcTDMCfgEntry 16 } prvtPwVcTDMCfgOosEcid OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "The local circuit identifier for the out-of-band signaling. This value is valid only when the object prvtPwVcTDMCfgEcid is set and when the current protocol is metro-ethernet" ::= { prvtPwVcTDMCfgEntry 17 } prvtPwVcTDMCfgProtocol OBJECT-TYPE SYNTAX INTEGER { undefined(0), satop(1), cesopsn(2), metro-ethernet(3), mpls (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The emulation protocol." ::= { prvtPwVcTDMCfgEntry 18 } prvtPwVcTDMCfgAdminStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative status of the circuit." ::= { prvtPwVcTDMCfgEntry 19 } prvtPwVcTDMCfgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This field is used to create and destroy TDM circuits." ::= { prvtPwVcTDMCfgEntry 20 } prvtPwVcTDMCfgRtp OBJECT-TYPE SYNTAX INTEGER { true ( 1 ), false ( 2 ) } MAX-ACCESS read-create STATUS current DESCRIPTION "TRTP header." ::= { prvtPwVcTDMCfgEntry 21 } prvtPwVcTDMCfgOosPort OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Oos port." ::= { prvtPwVcTDMCfgEntry 22 } prvtPwVcTDMCfgPayloadSuppression OBJECT-TYPE SYNTAX INTEGER { enable ( 1 ), disable ( 2 ) } MAX-ACCESS read-create STATUS current DESCRIPTION "Controls payload suppression. Object does not require module to be restarted." ::= { prvtPwVcTDMCfgEntry 23 } prvtPwVcTDMCfgInterface OBJECT-TYPE SYNTAX PrvtPwVcTDMCfgInterface MAX-ACCESS read-create STATUS current DESCRIPTION "Interface used for configuring OC3 TDM circuits P - Port Number, K,L,M standard numbering of SONET/SDH." ::= {prvtPwVcTDMCfgEntry 24} prvtPwVcTDMCfgIpTos OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "Set/Show IP TOS information" ::= { prvtPwVcTDMCfgEntry 25 } prvtPwVcTDMCfgIpOosTos OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "Set/Show IP Out Of Stream information" ::= { prvtPwVcTDMCfgEntry 26 } prvtPwVcTDMCfgPeerOosPort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This field is used to SET Destination Oos Port" ::= { prvtPwVcTDMCfgEntry 27 } prvtPwVcTDMCfgMplsLocalLabel OBJECT-TYPE SYNTAX Unsigned32 (0..1048575) MAX-ACCESS read-create STATUS current DESCRIPTION "The local circuit identifier. This object is only valid if the Circuit protocol is MPLS " DEFVAL { 15 } ::= { prvtPwVcTDMCfgEntry 28 } prvtPwVcTDMCfgMplsPeerLabel OBJECT-TYPE SYNTAX Unsigned32 (0..1048575) MAX-ACCESS read-create STATUS current DESCRIPTION "The peer circuit identifier. This object is only valid if the Circuit protocol is MPLS " DEFVAL { 15 } ::= { prvtPwVcTDMCfgEntry 29 } prvtPwVcTDMCfgMplsTTL OBJECT-TYPE SYNTAX INTEGER (2..255) MAX-ACCESS read-create STATUS current DESCRIPTION "MPLS TTL " DEFVAL { 255 } ::= { prvtPwVcTDMCfgEntry 30 } prvtPwVcTDMCfgMplsExp OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "MPLS EXP " DEFVAL { 0 } ::= { prvtPwVcTDMCfgEntry 31 } prvtPwVcTDMCfgMplsOosLocalLabel OBJECT-TYPE SYNTAX Unsigned32 (0..1048575) MAX-ACCESS read-create STATUS current DESCRIPTION "The local circuit identifier for the out-of-band signaling. This object is only valid if the Circuit protocol is MPLS " DEFVAL { 255 } ::= { prvtPwVcTDMCfgEntry 32 } prvtPwVcTDMCfgMplsOosPeerLabel OBJECT-TYPE SYNTAX Unsigned32 (0..1048575) MAX-ACCESS read-create STATUS current DESCRIPTION "The peer circuit identifier for the out-of-band signaling. This object is only valid if the Circuit protocol is MPLS " DEFVAL { 255 } ::= { prvtPwVcTDMCfgEntry 33 } prvtPwVcTDMCfgMplsOosTTL OBJECT-TYPE SYNTAX INTEGER (2..255) MAX-ACCESS read-create STATUS current DESCRIPTION "MPLS TTL for the out-of-band signaling." DEFVAL { 255 } ::= { prvtPwVcTDMCfgEntry 34 } prvtPwVcTDMCfgMplsOosExp OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "MPLS EXP for the out-of-band signaling." DEFVAL { 0 } ::= { prvtPwVcTDMCfgEntry 35 } prvtPwVcTDMCfgRtpOosPayload OBJECT-TYPE SYNTAX INTEGER (0..127) MAX-ACCESS read-create STATUS current DESCRIPTION "This field is used to SET RTP Oos payload type." ::= { prvtPwVcTDMCfgEntry 36 } prvtPwVcTDMCfgRtpPayload OBJECT-TYPE SYNTAX INTEGER (0..127) MAX-ACCESS read-create STATUS current DESCRIPTION "This field is used to SET RTP payload type." ::= { prvtPwVcTDMCfgEntry 37 } -- Channel group table -- prvtTDMChannelGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF PrvtTDMChannelGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the set of available channel groups." ::= { prvtPwVcTDMObjects 4 } prvtTDMChannelGrpEntry OBJECT-TYPE SYNTAX PrvtTDMChannelGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "These parameters are used to configure a CES channel group." INDEX { prvtTDMChannelGrpModuleID, prvtTDMChannelGrpID } ::= { prvtTDMChannelGrpTable 1 } PrvtTDMChannelGrpEntry ::= SEQUENCE { prvtTDMChannelGrpModuleID Unsigned32, prvtTDMChannelGrpID Unsigned32, prvtTDMChannelGrpCfgError INTEGER, prvtTDMChannelGrpTimeSlots TimeSlotList, prvtTDMChannelGrpOC3TimeSlots InterfaceTimeSlot } prvtTDMChannelGrpModuleID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the module to which this channel group belongs. " ::= { prvtTDMChannelGrpEntry 1 } prvtTDMChannelGrpID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The channel group ID." ::= { prvtTDMChannelGrpEntry 2 } prvtTDMChannelGrpCfgError OBJECT-TYPE SYNTAX INTEGER { noError(0), channelGroupAtached(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object displays the correctness of the configuration. If it has a value of channelGroupAtached(1) this channel group has been attached to a circuit and the new configuration cannot be applied." ::= { prvtTDMChannelGrpEntry 3 } prvtTDMChannelGrpTimeSlots OBJECT-TYPE SYNTAX TimeSlotList MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to configure which time slots are members of the given channel group." ::= { prvtTDMChannelGrpEntry 4 } prvtTDMChannelGrpOC3TimeSlots OBJECT-TYPE SYNTAX InterfaceTimeSlot MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to configure interface and time slots for the given channel group in OC3 module." ::= { prvtTDMChannelGrpEntry 5 } -- END of Table -- TDM PW Performance Current Table. prvtPwVcTDMPerfCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF PrvtPwVcTDMPerfCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The current 15 minute interval counts are in this table. This table provides per TDM PW performance information." ::= { prvtPwVcTDMObjects 5 } prvtPwVcTDMPerfCurrentEntry OBJECT-TYPE SYNTAX PrvtPwVcTDMPerfCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table is created by the agent for every prvtPwVcTDM entry. After 15 minutes, the contents of this table entry are copied to a new entry in the prvtPwVcTDMPerfInterval table and the counts in this entry are reset to zero." INDEX { prvtPwVcTDMModuleId,prvtPwVcTDMCircuitId } ::= { prvtPwVcTDMPerfCurrentTable 1 } PrvtPwVcTDMPerfCurrentEntry ::= SEQUENCE { prvtPwVcTDMPerfCurrentPktsOoseq Counter32, prvtPwVcTDMPerfCurrentJtrBfrUnderruns Counter32, prvtPwVcTDMPerfCurrentJtrBfrOverruns Counter32, prvtPwVcTDMPerfCurrentMalformedPkt Counter32, prvtPwVcTDMPerfCurrentNearEndFC Counter32, prvtPwVcTDMPerfCurrentFarEndFC Counter32 } prvtPwVcTDMPerfCurrentPktsOoseq OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets detected out of sequence (via TDM header sequence numbers), but successfully re-ordered. Note: some implementations may not support this Feature." ::= { prvtPwVcTDMPerfCurrentEntry 1 } prvtPwVcTDMPerfCurrentJtrBfrUnderruns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times a packet needed to be played out and the jitter buffer was empty." ::= { prvtPwVcTDMPerfCurrentEntry 2 } prvtPwVcTDMPerfCurrentJtrBfrOverruns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets detected out of range (via TDM header sequence numbers), and could not be re- ordered, or could not fit in the jitter buffer." ::= { prvtPwVcTDMPerfCurrentEntry 3 } prvtPwVcTDMPerfCurrentMalformedPkt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets detected with unexpected size, or bad headers' stack" ::= { prvtPwVcTDMPerfCurrentEntry 4 } prvtPwVcTDMPerfCurrentNearEndFC OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of local packet failures." ::= { prvtPwVcTDMPerfCurrentEntry 5 } prvtPwVcTDMPerfCurrentFarEndFC OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of remote packet failures." ::= { prvtPwVcTDMPerfCurrentEntry 6 } -- End TDM PW Performance Current Interval Table -- TDM PW Performance Interval Table. prvtPwVcTDMPerfIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF PrvtPwVcTDMPerfIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides performance information per TDM PW similar to the prvtPwVcTDMPerfCurrentTable above. However, these counts represent historical 15 minute intervals. Typically, this table will have a maximum of 96 entries for a 24 hour period, but is not limited to this. " ::= { prvtPwVcTDMObjects 6 } prvtPwVcTDMPerfIntervalEntry OBJECT-TYPE SYNTAX PrvtPwVcTDMPerfIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table is created by the agent for every prvtPwVcTDMPerfCurrentEntry that is 15 minutes old. The contents of the Current entry are copied to the new entry here. The Current entry, then resets its counts to zero for the next current 15 minute interval. " INDEX { prvtPwVcTDMModuleId,prvtPwVcTDMCircuitId, prvtPwVcTDMPerfIntervalNumber } ::= { prvtPwVcTDMPerfIntervalTable 1 } PrvtPwVcTDMPerfIntervalEntry ::= SEQUENCE { prvtPwVcTDMPerfIntervalNumber Unsigned32, prvtPwVcTDMPerfIntervalValidData TruthValue, prvtPwVcTDMPerfIntervalDuration Integer32, prvtPwVcTDMPerfIntervalPktsOoseq Counter32, prvtPwVcTDMPerfIntervalJtrBfrUnderruns Counter32, prvtPwVcTDMPerfIntervalJtrBfrOverruns Counter32, prvtPwVcTDMPerfIntervalMalformedPkt Counter32, prvtPwVcTDMPerfIntervalNearEndFC Counter32, prvtPwVcTDMPerfIntervalFarEndFC Counter32 } prvtPwVcTDMPerfIntervalNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "A number (normally between 1 and 96 to cover a 24 hour period) which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1. The minimum range of N is 1 through 4. The default range is 1 through 32. The maximum value of N is 1 through 96." ::= { prvtPwVcTDMPerfIntervalEntry 1 } prvtPwVcTDMPerfIntervalValidData OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates if the data for this interval is valid." ::= { prvtPwVcTDMPerfIntervalEntry 2 } prvtPwVcTDMPerfIntervalDuration OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The duration of a particular interval in seconds, Adjustments in the system's time-of-day clock, may cause the interval to be greater or less than, the normal value. Therefore this actual interval value is provided." ::= { prvtPwVcTDMPerfIntervalEntry 3 } prvtPwVcTDMPerfIntervalPktsOoseq OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets detected out of sequence (via TDM header sequence numbers), but successfully re-ordered. Note: some implementations mat not support this feature." ::= { prvtPwVcTDMPerfIntervalEntry 4 } prvtPwVcTDMPerfIntervalJtrBfrUnderruns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times a packet needed to be played out and the jitter buffer was empty." ::= { prvtPwVcTDMPerfIntervalEntry 5 } prvtPwVcTDMPerfIntervalJtrBfrOverruns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets detected out of range (via TDM header sequence numbers), and could not be re- ordered, or could not fit in the jitter buffer." ::= { prvtPwVcTDMPerfIntervalEntry 6 } prvtPwVcTDMPerfIntervalMalformedPkt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets detected with unexpected size, or bad headers' stack" ::= { prvtPwVcTDMPerfIntervalEntry 7 } prvtPwVcTDMPerfIntervalNearEndFC OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of local packet failures." ::= { prvtPwVcTDMPerfIntervalEntry 8 } prvtPwVcTDMPerfIntervalFarEndFC OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of remote packet failures." ::= { prvtPwVcTDMPerfIntervalEntry 9 } -- End TDM PW Performance Interval Table -- TDM PW Performance Table prvtPwVcTDMPerfTable OBJECT-TYPE SYNTAX SEQUENCE OF PrvtPwVcTDMPerfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides performance information per TDM PW similar to the prvtPwVcTDMPerfIntervalTable above. However, these counters represent complete historical information. " ::= { prvtPwVcTDMObjects 7 } prvtPwVcTDMPerfEntry OBJECT-TYPE SYNTAX PrvtPwVcTDMPerfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry is created in this table by the agent for every entry in the prvtPwVcTDM table." INDEX { prvtPwVcTDMModuleId,prvtPwVcTDMCircuitId } ::= { prvtPwVcTDMPerfTable 1 } PrvtPwVcTDMPerfEntry ::= SEQUENCE { prvtPwVcTDMPerfPktsOoseq Counter32, prvtPwVcTDMPerfJtrBfrUnderruns Counter32, prvtPwVcTDMPerfJtrBfrOverruns Counter32, prvtPwVcTDMPerfMalformedPkt Counter32, prvtPwVcTDMPerfNearEndFC Counter32, prvtPwVcTDMPerfFarEndFC Counter32, prvtPwVcTDMPerfDiscontinuityTime TimeStamp } prvtPwVcTDMPerfPktsOoseq OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets detected out of sequence (via TDM header sequence numbers), but successfully re-ordered. Note: some implementations may not support this feature." ::= { prvtPwVcTDMPerfEntry 1 } prvtPwVcTDMPerfJtrBfrUnderruns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times a packet needed to be played out and the jitter buffer was empty." ::= { prvtPwVcTDMPerfEntry 2 } prvtPwVcTDMPerfJtrBfrOverruns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets detected out of range (via TDM header sequence numbers), and could not be re- ordered, or could not fit in the jitter buffer." ::= { prvtPwVcTDMPerfEntry 3 } prvtPwVcTDMPerfMalformedPkt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets detected with unexpected size, or bad headers' stack." ::= { prvtPwVcTDMPerfEntry 4 } prvtPwVcTDMPerfDiscontinuityTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime on the most recent occasion at which any one or more of this segment's Counter32 suffered a discontinuity. If no such discontinuities have occurred since the last re- initialization of the local management subsystem, then this object contains a zero value." ::= { prvtPwVcTDMPerfEntry 5 } prvtPwVcTDMPerfNearEndFC OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of local packet failures." ::= { prvtPwVcTDMPerfEntry 6 } prvtPwVcTDMPerfFarEndFC OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of remote packet failures." ::= { prvtPwVcTDMPerfEntry 7 } -- End of PW TDM Performance table -- TDM PW Alarm Table prvtPwVcTDMAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF PrvtPwVcTDMAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains object for configuring and displaying CES Circuits TCA thresholds." ::= { prvtPwVcTDMObjects 8 } prvtPwVcTDMAlarmEntry OBJECT-TYPE SYNTAX PrvtPwVcTDMAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { prvtPwVcTDMModuleId, prvtPwVcTDMCircuitId, prvtPwVcTDMAlarmIndex } ::= { prvtPwVcTDMAlarmTable 1 } PrvtPwVcTDMAlarmEntry ::= SEQUENCE { prvtPwVcTDMAlarmIndex Gauge32, prvtPwVcTDMAlarmVariable OBJECT IDENTIFIER, prvtPwVcTDMAlarmThreshold INTEGER, prvtPwVcTDMAlarmValue INTEGER } prvtPwVcTDMAlarmIndex OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " An integer uniquely identifying an alarm entry." ::= { prvtPwVcTDMAlarmEntry 1 } prvtPwVcTDMAlarmVariable OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION "The OID of the variable whose value is being monitored. Depending on the time interval, the error condition and the modue and circuit ID, this points to an object from an entry in prvtPwVcTDMPerfCurrentTable or prvtPwVcTDMPerfTable." ::= { prvtPwVcTDMAlarmEntry 2 } prvtPwVcTDMAlarmThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The alarm condition threshold for this alarm entry. The alarm is triggered if the value of the object pointed by prvtPwVcTDMAlarmVariable remains above this threshold for more than 3 seconds." ::= { prvtPwVcTDMAlarmEntry 3 } prvtPwVcTDMAlarmValue OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object pointed to by prvtPwVcTDMAlarmVariable, present for notification purposes." ::= { prvtPwVcTDMAlarmEntry 4 } prvtPwVcTDMAlarm NOTIFICATION-TYPE OBJECTS { prvtPwVcTDMAlarmVariable, prvtPwVcTDMAlarmThreshold, prvtPwVcTDMAlarmValue } STATUS current DESCRIPTION "This notification is sent when the value of a TDM port error condition statistic has exceeded the configured threshold, or the value has dropped back below the threshold." ::= {prvtPwVcTDMTraps 1} prvtPwVcTDMStatusChange NOTIFICATION-TYPE OBJECTS { prvtPwVcTDMOperStatus, prvtPwVcTDMCfgAdminStatus } STATUS current DESCRIPTION "This notification is sent when the operational or administrative status of circuit changes." ::= {prvtPwVcTDMTraps 2} -- End of PW TDM Performance table -- Conformance Information prvtPwVcTDMGroups OBJECT IDENTIFIER ::= { prvtPwVcTDMConformance 1 } prvtPwVcTDMCompliances OBJECT IDENTIFIER ::= { prvtPwVcTDMConformance 2 } prvtPwTDMModuleCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for agent that support PW over TDM PSN operation." MODULE -- this module MANDATORY-GROUPS { prvtPwVcTDMGroup, prvtPwVcTDMPerfCurrentGroup, prvtPwVcTDMPerfIntervalGroup, prvtPwVcTDMPerfGroup, prvtPwVcTDMNotificationsGroup } OBJECT prvtPwVcTDMCfgPktReorder MIN-ACCESS read-only DESCRIPTION "The ability to set the packet reordering is not required." OBJECT prvtPwVcTDMCfgRtpHdrUsed MIN-ACCESS read-only DESCRIPTION "The ability to set the whether to use the RTP header or not is not required." ::= { prvtPwVcTDMCompliances 1 } -- Units of conformance. prvtPwVcTDMGroup OBJECT-GROUP OBJECTS { prvtPwVcTDMType, prvtPwVcRelTDMCfgIndex, prvtPwVcTDMTimeElapsed, prvtPwVcTDMValidIntervals, prvtPwVcTDMCurrentIndications, prvtPwVcTDMLatchedIndications, prvtPwVcTDMLastEsTimeStamp, prvtPwVcTDMCfgPayloadSize, prvtPwVcTDMCfgPktReorder, prvtPwVcTDMCfgRtpHdrUsed, prvtPwVcTDMCfgJtrBfrDepth } STATUS current DESCRIPTION "Collection of objects for basic TDM PW config and status." ::= { prvtPwVcTDMGroups 1 } prvtPwVcTDMPerfCurrentGroup OBJECT-GROUP OBJECTS { prvtPwVcTDMPerfCurrentPktsOoseq, prvtPwVcTDMPerfCurrentJtrBfrUnderruns, prvtPwVcTDMPerfCurrentJtrBfrOverruns, prvtPwVcTDMPerfCurrentMalformedPkt, prvtPwVcTDMPerfNearEndFC, prvtPwVcTDMPerfFarEndFC } STATUS current DESCRIPTION "Collection of current statistics objects for TDM PWs." ::= { prvtPwVcTDMGroups 2 } prvtPwVcTDMPerfIntervalGroup OBJECT-GROUP OBJECTS { prvtPwVcTDMPerfIntervalPktsOoseq, prvtPwVcTDMPerfIntervalJtrBfrUnderruns, prvtPwVcTDMPerfIntervalJtrBfrOverruns, prvtPwVcTDMPerfIntervalMalformedPkt, prvtPwVcTDMPerfNearEndFC, prvtPwVcTDMPerfFarEndFC, prvtPwVcTDMPerfIntervalValidData, prvtPwVcTDMPerfIntervalDuration } STATUS current DESCRIPTION "Collection of Interval statistics objects for TDM PWs." ::= { prvtPwVcTDMGroups 3 } prvtPwVcTDMPerfGroup OBJECT-GROUP OBJECTS { prvtPwVcTDMPerfPktsOoseq, prvtPwVcTDMPerfJtrBfrUnderruns, prvtPwVcTDMPerfJtrBfrOverruns, prvtPwVcTDMPerfMalformedPkt, prvtPwVcTDMPerfNearEndFC, prvtPwVcTDMPerfFarEndFC, prvtPwVcTDMPerfDiscontinuityTime } STATUS current DESCRIPTION "Collection of running statistics objects for TDM PWs." ::= { prvtPwVcTDMGroups 4 } prvtPwVcTDMNotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { prvtPwVcTDMAlarm, prvtPwVcTDMStatusChange } STATUS current DESCRIPTION "The group of supported notifications." ::= { prvtPwVcTDMGroups 5 } END