-- *********************************************************************
-- *********************************************************************
-- ** Filename: PRVT-SERV-MIB.mib
-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
-- ** Purpose: Private MIB
-- *********************************************************************
-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
-- WARNING:
--
-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
--
-- This file is the property of BATM Advanced Communications.
-- BATM Advanced Communications retains all title and
-- ownership in the Specification, including any revisions.

-- BATM Advanced Communications grants all interested parties a non-exclusive
-- license to use and distribute an unmodified copy of this
-- Specification in connection with management of BATM Advanced Communications 
-- and Telco Systems products, and without fee, provided that the following
-- conditions are met:
-- 1. Redistributions of this specification must retain the above copyright
-- notice, this list of conditions and the following disclaimer.
-- 2. Redistributions in binary form must reproduce the above copyright
-- notice, this list of conditions and the following disclaimer in the
-- documentation and/or other materials provided with the distribution.
-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
-- or promote products derived from this specification without specific prior written
-- permission.
--
-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
PRVT-SERV-MIB DEFINITIONS ::= BEGIN

IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
Integer32,
Unsigned32,
IpAddress,
Counter32
FROM SNMPv2-SMI

MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF

TEXTUAL-CONVENTION,
DisplayString,
RowStatus,
TimeStamp,
TruthValue
FROM SNMPv2-TC

TNamedItemOrEmpty,
TNetworkPolicyIdOrNone,
TSapIngressPolicyIdOrNone,
TSapEgressPolicyIdOrNone,
TNamedItem,
serviceAccessSwitch
FROM PRVT-QOS-MIB;


prvtServicesMIB MODULE-IDENTITY
LAST-UPDATED "200908070000Z"
ORGANIZATION "BATM Advanced Communication"
CONTACT-INFO
" BATM/Telco Systems Support team
Email: 
For North America: techsupport@telco.com
For North Europe: support@batm.de, info@batm.de
For the rest of the world: techsupport@telco.com"
DESCRIPTION
"This document is the SNMP MIB module to manage and provision
the various services of the T-Metro system."

-- 
-- Revision History
--
REVISION "200908070000Z"
DESCRIPTION "Added prefix prvt to Services' traps."
REVISION "200903260000Z"
DESCRIPTION "Added object for Revert timer"
REVISION "200903240000Z"
DESCRIPTION "Changed svcVPLSUplinkTable. Corrected various descriptions. Corrected types for some HQOS objects."
REVISION "200902170000Z"
DESCRIPTION "Removed references to undefined OBJECT-GROUPs."
REVISION "200810090000Z"
DESCRIPTION "Fixed the range of sdpGroupIdentifier."
REVISION "200804100000Z"
DESCRIPTION "changed svcVplsMode values. Added sapLearnMode."
REVISION "200803060000Z"
DESCRIPTION "changed description of svcAdminStatus."
REVISION "200801110000Z"
DESCRIPTION "changed sdpOperStatus values."
REVISION "200801090000Z"
DESCRIPTION "added sdpBindVlanTag."
REVISION "200801070000Z"
DESCRIPTION "Fixed the range of sdpGroupIdentifier."
REVISION "200706280000Z" 
DESCRIPTION "Returned for backward compatibility svcMtu; Clarified few attributes descripton."
REVISION "200609020000Z" 
DESCRIPTION "Lots of changes:
1. Index for the service table is changed.
2. Few objects from the service tables are moved in sdp
3. svcVCId is have now more generic usage. so it's name is changed to svcVPNId
4. The descriptions for some objects are enhanced"
REVISION "200607020000Z" 
DESCRIPTION "Fixed the range of sdpGroupIdentifier."
REVISION "200602040000Z" 
DESCRIPTION "Fixed the range of the svcMtu object and changed the description of svcRowStatus."
REVISION "200511090000Z" 
DESCRIPTION "Initial version."


::= { serviceAccessSwitch 2 }


-- --------------------------------------------------------------------
-- PRVT-SERV-MIB organisation
-- --------------------------------------------------------------------

prvtTMServObjs OBJECT IDENTIFIER ::= { prvtServicesMIB 1}
prvtTMCustObjs OBJECT IDENTIFIER ::= { prvtTMServObjs 1 }
prvtTMSvcObjs OBJECT IDENTIFIER ::= { prvtTMServObjs 2 }
prvtTMSapObjs OBJECT IDENTIFIER ::= { prvtTMServObjs 3 }
prvtTMSdpObjs OBJECT IDENTIFIER ::= { prvtTMServObjs 4 } 

prvtTMServVPLSGlobals OBJECT IDENTIFIER ::= { prvtTMSvcObjs 3 } 

prvtServNotifications OBJECT IDENTIFIER ::= { prvtServicesMIB 2 }
prvtCustNotif OBJECT IDENTIFIER ::= { prvtServNotifications 1 }
prvtSvcNotif OBJECT IDENTIFIER ::= { prvtServNotifications 2 }
prvtSapNotif OBJECT IDENTIFIER ::= { prvtServNotifications 3 }
prvtSdpNotif OBJECT IDENTIFIER ::= { prvtServNotifications 4 }

prvtCustTraps OBJECT IDENTIFIER ::= { prvtCustNotif 0 }
prvtSvcTraps OBJECT IDENTIFIER ::= { prvtSvcNotif 0 }
prvtSapTraps OBJECT IDENTIFIER ::= { prvtSapNotif 0 }
prvtSdpTraps OBJECT IDENTIFIER ::= { prvtSdpNotif 0 }


prvtTMServConformance OBJECT IDENTIFIER ::= { prvtServicesMIB 3 }
prvtTMCustConformance OBJECT IDENTIFIER ::= { prvtTMServConformance 1 }
prvtTMSvcConformance OBJECT IDENTIFIER ::= { prvtTMServConformance 2 }
prvtTMSapConformance OBJECT IDENTIFIER ::= { prvtTMServConformance 3 }
prvtTMSdpConformance OBJECT IDENTIFIER ::= { prvtTMServConformance 4 }
prvtTMTstpConformance OBJECT IDENTIFIER ::= { prvtTMServConformance 5 }

-- --------------------------------------------------------------------
-- BETM-SERV-MIB Textual Conventions
-- --------------------------------------------------------------------

ServiceAdminStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "ServiceAdminStatus data type is an enumerated integer that
describes the values used to identify the administrative
state of a service."
REFERENCE "Administrative Status"
SYNTAX INTEGER {
up(1),
down(2)
}

ServiceOperStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "ServiceOperStatus data type is an enumerated integer that
describes the values used to identify the current operational
state of a service."
REFERENCE "Operational status"
SYNTAX INTEGER {
up(1),
down(2)
}
ServObjName ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "ASCII string used to name various service
objects."
SYNTAX OCTET STRING (SIZE (0..32))

ServObjDesc ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "ASCII string used to describe various service
objects."
SYNTAX OCTET STRING (SIZE (0..256)) 

ServType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "This textual convention is used to specify the
type of a given service."
SYNTAX INTEGER {
epipe(1), -- Ethernet pipe
p3pipe(2), -- POS pipe
tls(3), -- Virtual private LAN service
vprn(4), -- Virtual private routed network
ies(5), -- Internet enhanced service
mirror(6), -- Mirror service
apipe(7), -- ATM pipe service
fpipe(8), -- FR pipe service 
vpws(9), -- VPWS service
vpls-pe(10), -- VPLS service Provider Edge 
vpls-mtu(11) -- VPLS service Multitenant Unit 
}

VpnId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "A number used to identify a VPN. In general
each service corresponds to a single VPN, but
under some circumstances a VPN may be composed
of multiple services."
SYNTAX Unsigned32 (0|1..4294967295)

SdpIdType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "A 16-bit number used to identify a Service
Distribution Point. This ID must be unique only
within the ESR where it is defined. The value 0
is used as the null ID."
SYNTAX Unsigned32 (0|1..17407)

TMEncapVal ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A valid Vlan ID in the range 1-4093, or 65535."
SYNTAX Unsigned32

TSapEgrQueueId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The value used to uniquely identify a SAP egress queue.
The actual valid values are those defined in the given
SAP egress QoS policy."
SYNTAX Unsigned32 (1..8) 

TSapIngQueueId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The value used to uniquely identify a SAP ingress queue.
The actual valid values are those defined in the given
SAP ingress QoS policy."
SYNTAX Unsigned32 (1..32) 

-- --------------------------------------------------------------------
-- Objects in the PRVT-SERV-MIB
-- --------------------------------------------------------------------

custNumEntries OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current number of customer records configured
in this device."
::= { prvtTMCustObjs 1 }

--
-- Customer Table
--

custInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF CustInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains customer information."
::= { prvtTMCustObjs 2 }

custInfoEntry OBJECT-TYPE
SYNTAX CustInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Information about a specific customer."
INDEX { custName }
::= { custInfoTable 1 }

CustInfoEntry ::= SEQUENCE { 
custName ServObjName,
custRowStatus RowStatus,
custContact ServObjDesc,
custPhone ServObjDesc,
custLastMgmtChange TimeStamp
}

custName OBJECT-TYPE
SYNTAX ServObjName
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The name of this customer."
DEFVAL { "" }
::= { custInfoEntry 1 }

custRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object indicates the status of this row."
::= { custInfoEntry 2 }

custContact OBJECT-TYPE
SYNTAX ServObjDesc
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The name of the primary contact person for
this customer."
DEFVAL { "" }
::= { custInfoEntry 3 }

custPhone OBJECT-TYPE
SYNTAX ServObjDesc
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The phone/pager number used to reach the
primary contact person."
DEFVAL { "" }
::= { custInfoEntry 4 }

custLastMgmtChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sysUpTime at the time of the
most recent management-initiated change to
this customer."
::= { custInfoEntry 5 }


custMultiServiceSiteTable OBJECT-TYPE
SYNTAX SEQUENCE OF CustMultiServiceSiteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Customer-multi-service-site-table."
::= { prvtTMCustObjs 3 }

custMultiServiceSiteEntry OBJECT-TYPE
SYNTAX CustMultiServiceSiteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Information about a specific customer's
multi-service site."
INDEX { custMultSvcSiteName }
::= { custMultiServiceSiteTable 1 }

CustMultiServiceSiteEntry ::= SEQUENCE {
custMultSvcSiteName DisplayString,
custMultSvcSiteRowStatus RowStatus,
custMultSvcSiteDescription ServObjDesc,
custMultSvcSiteIngressSchedulerPolicy ServObjName,
custMultSvcSiteEgressSchedulerPolicy ServObjName,
custMultSvcSiteLastMgmtChange TimeStamp
}

custMultSvcSiteName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..9))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Customer-multi-service-site-name."
::= { custMultiServiceSiteEntry 1 }

custMultSvcSiteRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Customer-multi-service-site rowStatus."
::= { custMultiServiceSiteEntry 2 }

custMultSvcSiteDescription OBJECT-TYPE
SYNTAX ServObjDesc
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Generic information about this customer's
Multi-Service Site."
DEFVAL { ''H }
::= { custMultiServiceSiteEntry 3 }


custMultSvcSiteIngressSchedulerPolicy OBJECT-TYPE
SYNTAX ServObjName
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The ingress QoS scheduler policy assigned
to this Multi-Service Site."
DEFVAL { ''H }
::= { custMultiServiceSiteEntry 4 }

custMultSvcSiteEgressSchedulerPolicy OBJECT-TYPE
SYNTAX ServObjName
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The egress QoS scheduler policy assigned
to this Multi-Service Site."
DEFVAL { ''H }
::= { custMultiServiceSiteEntry 5 }

custMultSvcSiteLastMgmtChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sysUpTime at the time of the
most recent management-initiated change to
this multi-service site."
::= { custMultiServiceSiteEntry 6 }

--
-- Customer Multi-Service Site Ingress Statistics Table
--

custMultiSvcSiteIngQosSchedStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CustMultiSvcSiteIngQosSchedStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains ingress QoS scheduler
statistics for the customer multi service site."
::= { prvtTMCustObjs 4 }

custMultiSvcSiteIngQosSchedStatsEntry OBJECT-TYPE
SYNTAX CustMultiSvcSiteIngQosSchedStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Ingress statistics about a specific customer
multi service site ingress scheduler."
INDEX {custMultSvcSiteName, IMPLIED custIngQosSchedName }
::= { custMultiSvcSiteIngQosSchedStatsTable 1 }

CustMultiSvcSiteIngQosSchedStatsEntry ::= SEQUENCE {
custIngQosSchedName TNamedItem,
custIngQosSchedStatsForwardedPackets Counter32,
custIngQosSchedStatsForwardedOctets Counter32
}

custIngQosSchedName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of the ingress QoS scheduler of
this customer multi service site."
::= { custMultiSvcSiteIngQosSchedStatsEntry 1 }

custIngQosSchedStatsForwardedPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of forwarded packets, as
determined by the customer multi service
site ingress scheduler policy."
::= { custMultiSvcSiteIngQosSchedStatsEntry 2 }

custIngQosSchedStatsForwardedOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of forwarded octets, as
determined by the customer multi service
site ingress scheduler policy."
::= { custMultiSvcSiteIngQosSchedStatsEntry 3 }

--
-- Customer Multi-Service Site Egress Statistics Table
--

custMultiSvcSiteEgrQosSchedStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CustMultiSvcSiteEgrQosSchedStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains egress QoS scheduler
statistics for the customer multi service site."
::= { prvtTMCustObjs 5 }

custMultiSvcSiteEgrQosSchedStatsEntry OBJECT-TYPE
SYNTAX CustMultiSvcSiteEgrQosSchedStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Egress statistics about a specific customer
multi service site egress scheduler."
INDEX { custMultSvcSiteName, IMPLIED custEgrQosSchedName }
::= { custMultiSvcSiteEgrQosSchedStatsTable 1 }

CustMultiSvcSiteEgrQosSchedStatsEntry ::= SEQUENCE {
custEgrQosSchedName TNamedItem,
custEgrQosSchedStatsForwardedPackets Counter32,
custEgrQosSchedStatsForwardedOctets Counter32
}

custEgrQosSchedName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of the egress QoS scheduler of
this customer multi service site."
::= { custMultiSvcSiteEgrQosSchedStatsEntry 1 }

custEgrQosSchedStatsForwardedPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of forwarded packets, as
determined by the customer multi service
site egress scheduler policy."
::= { custMultiSvcSiteEgrQosSchedStatsEntry 2 }

custEgrQosSchedStatsForwardedOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of forwarded octets, as
determined by the customer multi service
site egress scheduler policy."
::= { custMultiSvcSiteEgrQosSchedStatsEntry 3 }

--
-- Customer Multi-Service Site Ingress Statistics Table
-- with specific portId
--

custIngQosPortIdSchedStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CustIngQosPortIdSchedStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION 
"The custIngQosPortIdSchedStatsTable contains ingress QoS scheduler
statistics for the customer multi service site."
::= { prvtTMCustObjs 6 }

custIngQosPortIdSchedStatsEntry OBJECT-TYPE
SYNTAX CustIngQosPortIdSchedStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION 
"Each entry represents the ingress statistics about a specific customer
multi service site ingress scheduler. Entries are created when 
a scheduler policy is applied to an MSS."
INDEX { custMultSvcSiteName,
custIngQosPortIdSchedName, custIngQosAssignmentPortId }
::= { custIngQosPortIdSchedStatsTable 1 }

CustIngQosPortIdSchedStatsEntry ::= SEQUENCE {
custIngQosPortIdSchedName TNamedItem,
custIngQosAssignmentPortId Integer32,
custIngQosPortSchedFwdPkts Counter32,
custIngQosPortSchedFwdOctets Counter32
}

custIngQosPortIdSchedName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION 
"The value of custIngQosPortIdSchedName is used as an index 
of the ingress QoS scheduler of this customer multi service site."
::= { custIngQosPortIdSchedStatsEntry 1 }

custIngQosAssignmentPortId OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION 
"The value of custIngQosAssignmentPortId is used as an index
of the ingress QoS scheduler of this customer multi service site.
When an MSS assignment is an aps/ccag/lag in 'link' mode, each 
member-port of the aps/ccag/lag has its own scheduler. This object
refers to the portId of these member-ports."
::= {custIngQosPortIdSchedStatsEntry 2}

custIngQosPortSchedFwdPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION 
"The value of custIngQosPortSchedStatsFwdPkts represents the
number of forwarded packets, as determined by the customer multi service
site ingress scheduler policy."
::= { custIngQosPortIdSchedStatsEntry 3 }

custIngQosPortSchedFwdOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION 
"The value of custIngQosPortSchedStatsFwdOctets represents the
number of forwarded octets, as determined by the customer multi service
site ingress scheduler policy."
::= { custIngQosPortIdSchedStatsEntry 4 }

--
-- Customer Multi-Service Site Egress Statistics Table
-- with specific portId
--

custEgrQosPortIdSchedStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CustEgrQosPortIdSchedStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The custEgrQosPortIdSchedStatsTable contains egress QoS scheduler
statistics for the customer multi service site."
::= { prvtTMCustObjs 7 }

custEgrQosPortIdSchedStatsEntry OBJECT-TYPE
SYNTAX CustEgrQosPortIdSchedStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION 
"Each row entry represents the egress statistics for a customer
multi-service-site egress scheduler. Entries are created when 
a scheduler policy is applied to an MSS."
INDEX { custMultSvcSiteName,
custEgrQosPortIdSchedName, custEgrQosAssignmentPortId }
::= { custEgrQosPortIdSchedStatsTable 1 }

CustEgrQosPortIdSchedStatsEntry ::= SEQUENCE {
custEgrQosPortIdSchedName TNamedItem,
custEgrQosAssignmentPortId Integer32,
custEgrQosPortSchedFwdPkts Counter32,
custEgrQosPortSchedFwdOctets Counter32
}

custEgrQosPortIdSchedName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION 
"The value of custEgrQosPortIdSchedName is used as an index 
of the egress QoS scheduler of this customer multi service site."
::= { custEgrQosPortIdSchedStatsEntry 1}

custEgrQosAssignmentPortId OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION 
"The value of custEgrQosAssignmentPortId is used as an index
of the egress QoS scheduler of this customer multi service site.
When an MSS assignment is an aps/ccag/lag in 'link' mode, each 
member-port of the aps/ccag/lag has its own scheduler. This object
refers to the portId of these member-ports."
::= { custEgrQosPortIdSchedStatsEntry 2}

custEgrQosPortSchedFwdPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION 
"The value of custEgrQosPortSchedStatsFwdPkts represents the
number of forwarded packets, as determined by the customer multi service
site egress scheduler policy."
::= { custEgrQosPortIdSchedStatsEntry 3 }

custEgrQosPortSchedFwdOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of custEgrQosPortSchedStatsFwdOctets represents the
number of forwarded octets, as determined by the customer multi service
site egress scheduler policy."
::= { custEgrQosPortIdSchedStatsEntry 4 }

--
-- Customer traps
--

prvtCustCreated NOTIFICATION-TYPE
OBJECTS {
custName
}
STATUS current
DESCRIPTION "This trap is sent when a new row is created
in the custInfoTable."
::= { prvtCustTraps 1 }

prvtCustDeleted NOTIFICATION-TYPE
OBJECTS {
custName
}
STATUS current
DESCRIPTION "This trap is sent when an existing row is
deleted from the custInfoTable."
::= { prvtCustTraps 2 }

-- --------------------------------------------------------------------
-- prvtTMSvcObjs group
-- --------------------------------------------------------------------

svcNumEntries OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current number of services configured on
this node."
::= { prvtTMSvcObjs 1 }

--
-- Base Service Table
--

svcBaseInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SvcBaseInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains basic service information."
::= { prvtTMSvcObjs 2 }

svcBaseInfoEntry OBJECT-TYPE
SYNTAX SvcBaseInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Basic information about a specific service."
INDEX { svcId }
::= { svcBaseInfoTable 1 }

SvcBaseInfoEntry ::= SEQUENCE { 
svcId Integer32,
svcVpnId VpnId,
svcRowStatus RowStatus,
svcType ServType,
svcDescription ServObjDesc, 
svcMtu Integer32,
svcAdminStatus ServiceAdminStatus,
svcOperStatus ServiceOperStatus,
svcNumSaps Integer32,
svcNumSdps Integer32,
svcLastMgmtChange TimeStamp,
svcLastStatusChange TimeStamp,
svcEnableSecureSaps TruthValue,
svcCustName ServObjName,
svcRevertTimer Unsigned32
}
svcId OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The service ID."
DEFVAL { 0 }
::= { svcBaseInfoEntry 1 }

svcVpnId OBJECT-TYPE
SYNTAX VpnId
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object specifies the ID used by Service Provider(SP). 
It will have different format according to the type of 
service. 
This filed is mandatory. If all mandatory fields are 
set, the row status object is automatically changed from notReady(3)
to notInService(2) state
"
::= { svcBaseInfoEntry 2}

svcRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object indicates the status of this row. The
values supported during a set operation are 
createAndWait(5), destroy(6), active(1), notInSertvice(2). 
Service can be deleted any time. The transition between
svcRowStatus active(1) and notInService(2) states 
are rejected if svcAdminStatus is up(1). "
::= { svcBaseInfoEntry 3 } 

svcType OBJECT-TYPE
SYNTAX ServType
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The service type: e.g. EtherPipe, TLS, etc. Currently only 
vpls-pe(11), vpls-mtu(12), vpws-pe(9) and vpws-mtu(10) types 
are supported. 
This field is mandatory. 
Note: For VPLS service, vpls-mtu is supported only."
::= { svcBaseInfoEntry 4 }

svcDescription OBJECT-TYPE
SYNTAX ServObjDesc
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Generic information about this service."
DEFVAL { "" }
::= { svcBaseInfoEntry 5 } 

svcMtu OBJECT-TYPE
SYNTAX Integer32 (512..9216)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Not supported object"
::= { svcBaseInfoEntry 6 }

svcAdminStatus OBJECT-TYPE
SYNTAX ServiceAdminStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The desired state of this service. 
1. The transition from down(2) state to up(1) state can 
be done only if svcRowStatus is either active(1) or 
notInSercvice(2). 
2. The transition from up(1) to down(2) state has to be 
done in order to modify svcRowStatus object. "
DEFVAL { down }
::= { svcBaseInfoEntry 7 }

svcOperStatus OBJECT-TYPE
SYNTAX ServiceOperStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operating state of this service."
::= { svcBaseInfoEntry 8 }

svcNumSaps OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of SAPs defined on this service."
::= { svcBaseInfoEntry 9 }

svcNumSdps OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of SDPs bound to this service."
::= { svcBaseInfoEntry 10 }

svcLastMgmtChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sysUpTime at the time of the
most recent management-initiated change to
this service."
::= { svcBaseInfoEntry 11}

svcLastStatusChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sysUpTime at the time of the
most recent operating status change to his
service."
::= { svcBaseInfoEntry 12 } 

svcEnableSecureSaps OBJECT-TYPE 
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Used to configure the SAPs to forward only traffic from the uplink ports." 
DEFVAL { false } 
::= { svcBaseInfoEntry 13 } 

svcCustName OBJECT-TYPE
SYNTAX ServObjName
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The name of the customer this service belongs to."
DEFVAL { "" }
::= { svcBaseInfoEntry 14 }

svcRevertTimer OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Delay before switching to primary pseudowire in seconds" 
::= { svcBaseInfoEntry 15 }

--
-- VPLS Global parameters
--

svcVplsMode OBJECT-TYPE
SYNTAX INTEGER {
disable ( 0 ),
qualified ( 1 ),
unqualified ( 2 ),
enable ( 3 )
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object is used to configure whether VPLS operates in 
qualified or unqualified mode. Qualified and unqualified are not supported,
when having per port qualified/unqualified." 
DEFVAL { unqualified } 
::= { prvtTMServVPLSGlobals 1 } 

svcVPLSUplinkTable OBJECT-TYPE
SYNTAX SEQUENCE OF SvcVPLSUplinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains information about the VPLS uplink ports."
::= { prvtTMServVPLSGlobals 2 }

svcVPLSUplinkEntry OBJECT-TYPE
SYNTAX SvcVPLSUplinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A particular VPLS uplink port."
INDEX { svcVPLSUplinkPortID }
::= { svcVPLSUplinkTable 1 }

SvcVPLSUplinkEntry ::= SEQUENCE {
svcVPLSUplinkPortID Integer32,
svcVPLSUplinkIfIndex Integer32,
svcVPLSUplinkNetworkPolicy TNetworkPolicyIdOrNone,
svcVPLSUplinkNetworkQueueEgressPolicy TNamedItemOrEmpty,
svcVPLSUplinkShaperProfile Integer32
}

svcVPLSUplinkPortID OBJECT-TYPE
SYNTAX Integer32 (0..2147483647) 
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Unique uplink port index."
::= { svcVPLSUplinkEntry 1 } 

svcVPLSUplinkIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The ifIndex of the uplink port."
::= { svcVPLSUplinkEntry 2 } 

svcVPLSUplinkNetworkPolicy OBJECT-TYPE
SYNTAX TNetworkPolicyIdOrNone
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The network scheduler policy applied to the port."
::= { svcVPLSUplinkEntry 3 }

svcVPLSUplinkNetworkQueueEgressPolicy OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The network egress queue applied to the port."
::= { svcVPLSUplinkEntry 4 }

svcVPLSUplinkShaperProfile OBJECT-TYPE
SYNTAX Integer32 (0..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The ID of the shaping profile applied to the port.
0 indicates no shaping profile."
::= { svcVPLSUplinkEntry 5 }

--
-- Service traps
--

prvtSvcCreated NOTIFICATION-TYPE
OBJECTS {
svcId
}
STATUS current
DESCRIPTION "This trap is sent when a new row is created
in the svcBaseInfoTable."
::= { prvtSvcTraps 1 }

prvtSvcDeleted NOTIFICATION-TYPE
OBJECTS {
svcId 
}
STATUS current
DESCRIPTION "This trap is sent when an existing row is
deleted from the svcBaseInfoTable."
::= { prvtSvcTraps 2 }

prvtSvcStatusChanged NOTIFICATION-TYPE
OBJECTS { 
svcId,
svcVpnId,
svcAdminStatus,
svcOperStatus
}
STATUS current
DESCRIPTION "The scvStatusChanged notification is generated when
there is a change in the administrative or operating
status of a service."
::= { prvtSvcTraps 3 }

-- --------------------------------------------------------------------
-- prvtTMSapObjs group
-- --------------------------------------------------------------------

sapNumEntries OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current number of SAPs configured in this
device."
::= { prvtTMSapObjs 1 }

--
-- Base SAP Table
--

sapBaseInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapBaseInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains basic SAP information."
::= { prvtTMSapObjs 2 }

sapBaseInfoEntry OBJECT-TYPE
SYNTAX SapBaseInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Information about a specific SAP."
INDEX { svcId, sapPortId, sapEncapValue }
::= { sapBaseInfoTable 1 }

SapBaseInfoEntry ::= SEQUENCE {
sapPortId INTEGER,
sapEncapValue TMEncapVal,
sapRowStatus RowStatus,
sapType ServType,
sapDescription ServObjDesc,
sapAdminStatus ServiceAdminStatus,
sapOperStatus INTEGER,
sapLastMgmtChange TimeStamp,
sapOperFlags BITS, 
sapCustMultSvcSiteName DisplayString,
sapIngressQosPolicyId TSapIngressPolicyIdOrNone,
sapEgressQosPolicyId TSapEgressPolicyIdOrNone,
sapIngressQosSchedulerPolicy TNamedItemOrEmpty,
sapEgressQosSchedulerPolicy TNamedItemOrEmpty,
sapLearnMode INTEGER
}

sapPortId OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The ID of the access port where this SAP
is defined."
::= { sapBaseInfoEntry 1 }

sapEncapValue OBJECT-TYPE
SYNTAX TMEncapVal
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the label used to identify this
SAP on the access port specified by sapPortId."
::= { sapBaseInfoEntry 2 }

sapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object indicates the status of this row. The
values supported during a set operation are createAndGo(4) 
active(1), notInService(2) and destroy(6).
Saps can be deleted any time. The transition between
svcRowStatus active(1) and notInService(2) states 
are rejected if sapAdminStatus is up(1). 
"
::= { sapBaseInfoEntry 3 }

sapType OBJECT-TYPE
SYNTAX ServType 
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the type of service where
this SAP is defined."
::= { sapBaseInfoEntry 4 }

sapDescription OBJECT-TYPE
SYNTAX ServObjDesc
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Generic information about this SAP."
DEFVAL { "" }
::= { sapBaseInfoEntry 5 }

sapAdminStatus OBJECT-TYPE
SYNTAX ServiceAdminStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The desired state of this SAP. 
1. The value of this object depends on the value of svcAdminStatus 
for the service this sap belongs to. If the sap is created and 
its service has svcAdminStatus set to down(2), its own admin status 
will be down(2), otherwise sapAdminStatus will be up(1).
2. If sapRowStatus is in notInService state, the sapAdminStatus 
transition from down(2) to up(1) state will automaticaly change the 
value of the sapRowStatus object to active(1)"
DEFVAL { up }
::= { sapBaseInfoEntry 6 }

sapOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
ingressQosMismatch(3),
egressQosMismatch(4),
svcAdminDown(5),
portMtuTooSmall(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operating state of this SAP, showing also the reason for the
current operation state

Values ingressQosMismatch(3),egressQosMismatch(4),svcAdminDown(5) 
and portMtuTooSmall(6) are not supported"
::= { sapBaseInfoEntry 7 }

sapLastMgmtChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sysUpTime at the time of the
most recent management-initiated change to
this SAP."
::= { sapBaseInfoEntry 8 }

sapOperFlags OBJECT-TYPE
SYNTAX BITS {
sapAdminDown(0), -- SAP is admin down
svcAdminDown(1), -- Service is admin down
portOperDown(2) -- Access port is oper down
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object specifies all the conditions that
affect the operating status of this SAP."
::= { sapBaseInfoEntry 9 } 

sapCustMultSvcSiteName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..9))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of this object, when not null, indicates
the Multi-Service Site this SAP is a member of. This
information is used to configure the ingress and
egress QoS schedulers for this SAP."
DEFVAL { ''H }
::= { sapBaseInfoEntry 11 }

sapIngressQosPolicyId OBJECT-TYPE
SYNTAX TSapIngressPolicyIdOrNone
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The row index in the hqosSapIngressTable
corresponding to this ingress QoS
policy, or zero if no policy is specified."
DEFVAL { 0 }
::= { sapBaseInfoEntry 12 }

sapEgressQosPolicyId OBJECT-TYPE
SYNTAX TSapEgressPolicyIdOrNone
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The row index in the hqosSapEgressTable
corresponding to this egress QoS policy,
or zero if no policy is specified."
DEFVAL { 0 }
::= { sapBaseInfoEntry 13 }

sapIngressQosSchedulerPolicy OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object can be set only when sapCustMultSvcSite
is null. It indicates the ingress QoS scheduler for
this SAP."
DEFVAL { ''H }
::= { sapBaseInfoEntry 14 }

sapEgressQosSchedulerPolicy OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object can be set only when sapCustMultSvcSite
is null. It indicates the egress QoS scheduler for
this SAP."
DEFVAL { ''H }
::= { sapBaseInfoEntry 15 }

sapLearnMode OBJECT-TYPE
SYNTAX INTEGER {
qualified ( 1 ),
unqualified ( 2 )
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Sap learning mode. Currently supported as read-only."
::= { sapBaseInfoEntry 16 }

prvtSapCreated NOTIFICATION-TYPE
OBJECTS {
svcId,
sapPortId,
sapEncapValue
}
STATUS current
DESCRIPTION "This trap is sent when a new row is created
in the sapBaseInfoTable."
::= { prvtSapTraps 1 }

prvtSapDeleted NOTIFICATION-TYPE
OBJECTS {
svcId,
sapPortId,
sapEncapValue
}
STATUS current
DESCRIPTION "This trap is sent when an existing row is
deleted from the sapBaseInfoTable."
::= { prvtSapTraps 2 }

prvtSapStatusChanged NOTIFICATION-TYPE
OBJECTS {
svcId,
sapPortId,
sapEncapValue,
sapAdminStatus,
sapOperStatus
}
STATUS current
DESCRIPTION "The sapStatusChanged notification is generated
when there is a change in the administrative or
operating status of an SAP."
::= { prvtSapTraps 3 } 

--
-- Ingress QoS Queue SAP Statistics Table
--

sapIngQosQueueStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapIngQosQueueStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains ingress QoS queue SAP
statistics."
::= { prvtTMSapObjs 3 }

sapIngQosQueueStatsEntry OBJECT-TYPE
SYNTAX SapIngQosQueueStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Ingress statistics about a specific SAP's
QoS queue."
INDEX { svcId, sapPortId, sapEncapValue, sapIngQosQueueId }
::= { sapIngQosQueueStatsTable 1 }

SapIngQosQueueStatsEntry ::= SEQUENCE {
sapIngQosQueueId TSapIngQueueId,
sapIngQosQueueStatsOfferedHiPrioPackets Counter32,
sapIngQosQueueStatsOfferedLoPrioPackets Counter32,
sapIngQosQueueStatsOfferedHiPrioOctets Counter32,
sapIngQosQueueStatsOfferedLoPrioOctets Counter32,
sapIngQosQueueStatsForwardedInProfPackets Counter32,
sapIngQosQueueStatsForwardedOutProfPackets Counter32,
sapIngQosQueueStatsForwardedInProfOctets Counter32,
sapIngQosQueueStatsForwardedOutProfOctets Counter32,
sapIngQosQueueStatsDroppedPackets Counter32,
sapIngQosQueueStatsDroppedOctets Counter32,
sapIngQosCustName ServObjName
}

sapIngQosQueueId OBJECT-TYPE
SYNTAX TSapIngQueueId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of the ingress QoS queue of
this SAP."
::= { sapIngQosQueueStatsEntry 1 }

sapIngQosQueueStatsOfferedHiPrioPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of high priority packets,
as determined by the SAP ingress QoS
policy, offered by the service queue."
::= { sapIngQosQueueStatsEntry 2 }

sapIngQosQueueStatsOfferedLoPrioPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of low priority packets,
as determined by the SAP ingress QoS
policy, offered by the service queue."
::= { sapIngQosQueueStatsEntry 3 }

sapIngQosQueueStatsOfferedHiPrioOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of high priority octets,
as determined by the SAP ingress QoS
policy, offered by the service queue."
::= { sapIngQosQueueStatsEntry 4 }

sapIngQosQueueStatsOfferedLoPrioOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of low priority octets,
as determined by the SAP ingress QoS
policy, offered by the service queue."
::= { sapIngQosQueueStatsEntry 5 }

sapIngQosQueueStatsForwardedInProfPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of in-profile packets
(rate below CIR) forwarded by the
ingress service queue."
::= { sapIngQosQueueStatsEntry 6 }

sapIngQosQueueStatsForwardedOutProfPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of out-of-profile packets
(rate above CIR) forwarded by the
ingress service queue."
::= { sapIngQosQueueStatsEntry 7 }

sapIngQosQueueStatsForwardedInProfOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of in-profile octets
(rate below CIR) forwarded by the
ingress service queue."
::= { sapIngQosQueueStatsEntry 8 }

sapIngQosQueueStatsForwardedOutProfOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of out-of-profile octets
(rate above CIR) forwarded by the
ingress service queue."
::= { sapIngQosQueueStatsEntry 9 }

sapIngQosQueueStatsDroppedOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of octets
discarded in the egress queue."
::= { sapIngQosQueueStatsEntry 10 }

sapIngQosQueueStatsDroppedPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of in-profile packets
discarded by the Ingess queue."
::= { sapIngQosQueueStatsEntry 11 }

sapIngQosCustName OBJECT-TYPE
SYNTAX ServObjName
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Customer Name of the site this SAP belongs to."
::= { sapIngQosQueueStatsEntry 12 }

--
-- Egress QoS Queue SAP Statistics Table
--

sapEgrQosQueueStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapEgrQosQueueStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains egress QoS queue SAP
statistics."
::= { prvtTMSapObjs 4 }

sapEgrQosQueueStatsEntry OBJECT-TYPE
SYNTAX SapEgrQosQueueStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Egress statistics about a specific SAP's
QoS queue."
INDEX { svcId, sapPortId, sapEncapValue, sapEgrQosQueueId }
::= { sapEgrQosQueueStatsTable 1 }

SapEgrQosQueueStatsEntry ::= SEQUENCE {
sapEgrQosQueueId TSapEgrQueueId,
sapEgrQosQueueStatsForwardedInProfPackets Counter32,
sapEgrQosQueueStatsForwardedOutProfPackets Counter32,
sapEgrQosQueueStatsForwardedInProfOctets Counter32,
sapEgrQosQueueStatsForwardedOutProfOctets Counter32,
sapEgrQosQueueStatsDroppedPackets Counter32,
sapEgrQosQueueStatsDroppedOctets Counter32,
sapEgrQosCustName ServObjName
}

sapEgrQosQueueId OBJECT-TYPE
SYNTAX TSapEgrQueueId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of the egress QoS queue of
this SAP."
::= { sapEgrQosQueueStatsEntry 1 }

sapEgrQosQueueStatsForwardedInProfPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of in-profile packets
(rate below CIR) forwarded by the
egress queue."
::= { sapEgrQosQueueStatsEntry 2 }

sapEgrQosQueueStatsForwardedOutProfPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of out-of-profile packets
(rate above CIR) forwarded by the
egress queue."
::= { sapEgrQosQueueStatsEntry 3 }

sapEgrQosQueueStatsForwardedInProfOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of in-profile octets
(rate below CIR) forwarded by the
egress queue."
::= { sapEgrQosQueueStatsEntry 4 }

sapEgrQosQueueStatsForwardedOutProfOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of out-of-profile octets
(rate above CIR) forwarded by the
egress queue."
::= { sapEgrQosQueueStatsEntry 5 }

sapEgrQosQueueStatsDroppedOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of octets
discarded in the egress queue."
::= { sapEgrQosQueueStatsEntry 6 }

sapEgrQosQueueStatsDroppedPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of in-profile packets
discarded by the egress queue."
::= { sapEgrQosQueueStatsEntry 7 }

sapEgrQosCustName OBJECT-TYPE
SYNTAX ServObjName
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Customer Name of the site this SAP belongs to."
::= { sapEgrQosQueueStatsEntry 8 }

--
-- Ingress QoS Scheduler SAP Statistics Table
--

sapIngQosSchedStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapIngQosSchedStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains ingress QoS queue SAP
statistics."
::= { prvtTMSapObjs 5 }

sapIngQosSchedStatsEntry OBJECT-TYPE
SYNTAX SapIngQosSchedStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Ingress statistics about a specific SAP's
QoS queue."
INDEX { svcId, sapPortId, sapEncapValue,
IMPLIED sapIngQosSchedName }
::= { sapIngQosSchedStatsTable 1 }

SapIngQosSchedStatsEntry ::= SEQUENCE {
sapIngQosSchedName TNamedItem,
sapIngQosSchedStatsForwardedPackets Counter32,
sapIngQosSchedStatsForwardedOctets Counter32,
sapIngQosSchedCustName ServObjName
}

sapIngQosSchedName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of the ingress QoS scheduler of
this SAP."
::= { sapIngQosSchedStatsEntry 1 }

sapIngQosSchedStatsForwardedPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of forwarded packets, as
determined by the SAP ingress scheduler
policy, offered by the Pchip to the
Qchip."
::= { sapIngQosSchedStatsEntry 2 }

sapIngQosSchedStatsForwardedOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of forwarded octets,as
determined by the SAP ingress schduler
policy, offered by the Pchip to the
Qchip."
::= { sapIngQosSchedStatsEntry 3 }

sapIngQosSchedCustName OBJECT-TYPE
SYNTAX ServObjName
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Customer Name of the site this SAP belongs to."
::= { sapIngQosSchedStatsEntry 4 }

--
-- Egress QoS Scheduler SAP Statistics Table
--

sapEgrQosSchedStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapEgrQosSchedStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains ingress QoS queue SAP
statistics."
::= { prvtTMSapObjs 6 }

sapEgrQosSchedStatsEntry OBJECT-TYPE
SYNTAX SapEgrQosSchedStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Egress statistics about a specific SAP's
QoS queue."
INDEX { svcId, sapPortId, sapEncapValue,
IMPLIED sapEgrQosSchedName }
::= { sapEgrQosSchedStatsTable 1 }

SapEgrQosSchedStatsEntry ::= SEQUENCE {
sapEgrQosSchedName TNamedItem,
sapEgrQosSchedStatsForwardedPackets Counter32,
sapEgrQosSchedStatsForwardedOctets Counter32,
sapEgrQosSchedCustName ServObjName
}

sapEgrQosSchedName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of the egress QoS scheduler of
this SAP."
::= { sapEgrQosSchedStatsEntry 1 }

sapEgrQosSchedStatsForwardedPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of forwarded packets by the
egress Qchip, as determined by the SAP
egress scheduler policy."
::= { sapEgrQosSchedStatsEntry 2 }

sapEgrQosSchedStatsForwardedOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of forwarded octets by the
egress Qchip, as determined by the SAP
egress scheduler policy."
::= { sapEgrQosSchedStatsEntry 3 }

sapEgrQosSchedCustName OBJECT-TYPE
SYNTAX ServObjName
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Customer Name of the site this SAP belongs to."
::= { sapEgrQosSchedStatsEntry 4 }

-- --------------------------------------------------------------------
-- prvtTMSdpObjs group
-- --------------------------------------------------------------------

sdpNumEntries OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current number of SDPs configured in this
device."
::= { prvtTMSdpObjs 1 }

sdpNextFreeId OBJECT-TYPE
SYNTAX SdpIdType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The next available value for sdpId."
::= { prvtTMSdpObjs 2 }

--
-- SDP Table
--

sdpInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains SDP information."
::= { prvtTMSdpObjs 3 }

sdpInfoEntry OBJECT-TYPE
SYNTAX SdpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Information about a specific SDP."
INDEX { svcId, sdpId }
::= { sdpInfoTable 1 }

SdpInfoEntry ::= SEQUENCE {
sdpId SdpIdType,
sdpRowStatus RowStatus,
sdpDelivery INTEGER,
sdpFarEndIpAddress IpAddress,
sdpDescription ServObjDesc,
sdpLabelSignaling INTEGER,
sdpAdminStatus ServiceAdminStatus,
sdpOperStatus INTEGER,
sdpLastMgmtChange TimeStamp,
sdpLdpEnabled TruthValue,
sdpOperFlags BITS,
sdpLastStatusChange TimeStamp,
sdpAdminIngressLabel Unsigned32,
sdpAdminEgressLabel Unsigned32,
sdpAdminIsBackup TruthValue,
sdpOperIsBackup TruthValue,
sdpOutInterface Integer32,
sdpGroupIdentifier Unsigned32,
sdpTransportTunnelName DisplayString ,
sdpVCType INTEGER,
sdpType INTEGER,
sdpMtu Integer32,
sdpBindVlanTag Unsigned32,
sdpIsPwStatusSignalingEnable TruthValue,
sdpEpsAdminIsPrimary TruthValue,
sdpEpsAdminIsSecondary TruthValue
}

sdpId OBJECT-TYPE
SYNTAX SdpIdType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "SDP identifier."
::= { sdpInfoEntry 1 }

sdpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object indicates the status of this row. 
1. The values supported during a set operation are 
createAndWait(5), destroy(6), active(1), notInSertvice(2). 
Sdps can be deleted any time. The transition between
active(1) and notInService(2) states are rejected if 
sdpAdminStatus is up(1). 
"
::= { sdpInfoEntry 2 }

sdpDelivery OBJECT-TYPE
SYNTAX INTEGER {
gre(1),
mpls(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object specifies the type of delivery used
by this SDP.
NOTE! Currently we support only mpls. The modification 
of this obect will be rejected. " 
DEFVAL { mpls }
::= { sdpInfoEntry 3 }

sdpFarEndIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object specifies the IP address of the
remote end of the GRE or MPLS tunnel defined
by this SDP. 

This field is mandatory. If all mandatory fields are set, the 
row status object is automatically changed from notReady(3)
to notInService(2) state.
"
::= { sdpInfoEntry 4 }

sdpDescription OBJECT-TYPE
SYNTAX ServObjDesc
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Generic information about this SDP."
DEFVAL { "" }
::= { sdpInfoEntry 5 }

sdpLabelSignaling OBJECT-TYPE
SYNTAX INTEGER {
none(1),
tldp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object specifies the signaling protocol
used to obtain the ingress and egress labels
used in frames transmitted and received on
this SDP. When the value of this object is
none(1) then the labels are manually assigned
at the time the SDP is configured. The
value of this object can only be changed while
the admin status of the SDP is down(2).

This field is mandatory. If all mandatory fields are set, the 
row status object is automatically changed from notReady(3)
to notInService(2) state
"
DEFVAL { tldp }
::= { sdpInfoEntry 6 }

sdpAdminStatus OBJECT-TYPE
SYNTAX ServiceAdminStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The desired state of this SDP.
1. The value of this object depends on the value of svcAdminStatus. 
It will be rejected to set sdpAdminStatus to up(1), when svcAdminStatus
is set to down(2).
2. If sdpRowStatus is in notInService state, the transition of sdpAdminStatus 
from down(2) to up(1) state will also automaticaly change the 
value of the sdpRowStatus object to active(1)
"
DEFVAL { down }
::= { sdpInfoEntry 7 }

sdpOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
goingUp (3),
tunnelDown (4),
transportSelected (5),
supressed (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operating state of this SDP. 
1. Sdp is up and running.
2. Initial state. Entry is inactive.
3. Peers are ready to select transport.
4. There is no suitable transport.
5. SDP is not operational due to local/remote SAP down or remote SDP has no transport.
6. Sdp is up and ready to carry user traffic but it is not used at the moment (backup).
"
::= { sdpInfoEntry 8 }

sdpLastMgmtChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sysUpTime at the time of the
most recent management-initiated change to
this SDP."
::= { sdpInfoEntry 9 }

sdpLdpEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "When the value of this object is true(1)
the transport LSP's are signalled by LDP,
as opposed to being provisioned static or
RSVP-signalled LSP's. This object applies
only to MPLS SDP's."
DEFVAL { false }
::= { sdpInfoEntry 10 }

sdpOperFlags OBJECT-TYPE
SYNTAX BITS {
sdpAdminDown(0),
signalingSessionDown(1),
transportTunnelDown(2),
invalidEgressInterface(3),
noSystemIpAddress(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object specifies all the conditions that
affect the operating status of this SDP."
::= { sdpInfoEntry 11 }

sdpLastStatusChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sysUpTime at the time of the
most recent operating status change to this
SDP."
::= { sdpInfoEntry 12 }

sdpAdminIngressLabel OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1 | 2048..18431)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The static MPLS VC label used by the far-end device
to send packets to this device in this service via
this SDP."
DEFVAL { 0 }
::= { sdpInfoEntry 13 }

sdpAdminEgressLabel OBJECT-TYPE
SYNTAX Unsigned32 (0 | 16..1048575)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The static MPLS VC label used by this device to send
packets to the far-end device in this service via
this SDP."
DEFVAL { 0 }
::= { sdpInfoEntry 14 }

sdpAdminIsBackup OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object is used in administratively to specify the preferred primary or backup state of this SDP.
A value of false means this is the primary SDP.
This field is mandatory if svcType is set to vpls-mtu(12) or vpws-mtu(10). 
The sdpType must be set to spoke(2). If all mandatory fields are 
set, the row status object is automatically changed from notReady(3) to 
notInService(2) state."
DEFVAL { false }
::= { sdpInfoEntry 15 }

sdpOperIsBackup OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "It represents the current operational state of this SDP as either active or backup. 
A value of false means this is the active SDP. A value of true means that this SDP is
in backup suppressed state."
DEFVAL { false }
::= { sdpInfoEntry 16 }

sdpOutInterface OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object is valid only if the type of service is tls(3). 
The ifIndex of the desired outbound interface for this SDP.

This field is currently not supported. Its modification 
will be rejected. 

The default value is 0
"
DEFVAL { 0 }
::= { sdpInfoEntry 17 } 

sdpGroupIdentifier OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object is valid only if the type of service is tls(3). 
The Group ID for this SDP. SDP's bound to the same service must have the same Group ID's."
DEFVAL { 0 }
::= { sdpInfoEntry 18 } 

sdpTransportTunnelName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Optional transport tunnel name. For the SDP to be operational an entry must exist in 
mplsTunnelTable with this name."
DEFVAL { "" }
::= { sdpInfoEntry 19 } 

sdpVCType OBJECT-TYPE
SYNTAX INTEGER
{ 
ethernet-vlan(4),
ethernet(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "VC Type of the service."
::= { sdpInfoEntry 20} 

sdpType OBJECT-TYPE
SYNTAX INTEGER
{
invalidType(0),
generic(1),
spoke(2),
mesh(3),
hub(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The type of this SDP.

Currently the only supported sdp types are spoke(2) and mesh(3)

This field is mandatory. If svcType is set to vpls-mtu(12) or vpws-mtu(10), 
trying to set sdpType to mesh(3) will be rejected(Wring configuration). 
If all mandatory fields are set, the row status object is automatically 
changed from notReady(3) to notInService(2) state.
"
::= { sdpInfoEntry 21}

sdpMtu OBJECT-TYPE
SYNTAX Integer32 (512..9216)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The largest frame size (in octets) that this
SDP can handle"
::= { sdpInfoEntry 22}

sdpBindVlanTag OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write 

STATUS current
DESCRIPTION "Outgoing vlan."
::= { sdpInfoEntry 23}

sdpIsPwStatusSignalingEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies if PW-status signalling is enabled per given SDP."
::= { sdpInfoEntry 24}

sdpEpsAdminIsPrimary OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "Administrative primary status if the specified SDP. If set to true, the SDP is the primary-link of the protection."
    DEFVAL { false }
::= { sdpInfoEntry 25 }

sdpEpsAdminIsSecondary OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "Administrative secondary status if the specified SDP. If set to true, the SDP is the secondary-link of the protection."
    DEFVAL { false }
::= { sdpInfoEntry 26 }

---notifications

prvtSdpCreated NOTIFICATION-TYPE
OBJECTS {
svcId, sdpId
}
STATUS current
DESCRIPTION "This trap is sent when a new row is created
in the sdpInfoTable."
::= { prvtSdpTraps 1 }

prvtSdpDeleted NOTIFICATION-TYPE
OBJECTS {
svcId, sdpId
}
STATUS current
DESCRIPTION "This trap is sent when an existing row is
deleted from the sdpInfoTable."
::= { prvtSdpTraps 2 }

prvtSdpStatusChanged NOTIFICATION-TYPE
OBJECTS {
svcId,
sdpId,
sdpAdminStatus,
sdpOperStatus
}
STATUS current
DESCRIPTION "The sdpStatusChanged notification is generated
when there is a change in the administrative or
operating status of an SDP."
::= { prvtSdpTraps 3 }

-- ----------------------------------------------------------------------------
-- Conformance Information
-- ----------------------------------------------------------------------------

prvtTMCustCompliances OBJECT IDENTIFIER ::= { prvtTMCustConformance 1 }
prvtTMCustGroups OBJECT IDENTIFIER ::= { prvtTMCustConformance 2 }

prvtTMSvcCompliances OBJECT IDENTIFIER ::= { prvtTMSvcConformance 1 }
prvtTMSvcGroups OBJECT IDENTIFIER ::= { prvtTMSvcConformance 2 }

prvtTMSapCompliances OBJECT IDENTIFIER ::= { prvtTMSapConformance 1 }
prvtTMSapGroups OBJECT IDENTIFIER ::= { prvtTMSapConformance 2 }

prvtTMSdpCompliances OBJECT IDENTIFIER ::= { prvtTMSdpConformance 1 }
prvtTMSdpGroups OBJECT IDENTIFIER ::= { prvtTMSdpConformance 2 }

-- ----------------------------------------------
-- Compliance Statements
-- ----------------------------------------------

prvtTMCustCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for management of services customers
on T-Metro series systems."
MODULE -- this module
MANDATORY-GROUPS
{
prvtTMCustGlobalGroup 
}
::= { prvtTMCustCompliances 1 }

prvtTMSvcCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for management of services
on T-Metro series systems."
MODULE -- this module
MANDATORY-GROUPS
{
prvtTMSvcGlobalGroup,
prvtTMSvcNotificationGroup
}
::= { prvtTMSvcCompliances 1 }

prvtTMSapCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for management of services SAPs
on T-Metro series systems."
MODULE -- this module
MANDATORY-GROUPS {
prvtTMSapGlobalGroup,
prvtTMSapNotificationGroup
}
::= { prvtTMSapCompliances 1 }

prvtTMSdpCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for management of services SDPs
on T-Metro series systems."
MODULE -- this module
MANDATORY-GROUPS {
prvtTMSdpGlobalGroup
}
::= { prvtTMSdpCompliances 1 }

-- ----------------------------------------------
-- customer OBJECT-GROUPs
-- ----------------------------------------------

prvtTMCustGlobalGroup OBJECT-GROUP
OBJECTS {
custNumEntries,
custName,
custRowStatus,
custContact,
custPhone,
custLastMgmtChange
}
STATUS current
DESCRIPTION
"The group of objects supporting management of Services customers
general capabilities on T-Metro series systems."
::= { prvtTMCustGroups 1 }

-- ----------------------------------------------
-- Services OBJECT-GROUPs
-- ----------------------------------------------

prvtTMSvcGlobalGroup OBJECT-GROUP
OBJECTS {
svcNumEntries,
svcId,
svcRowStatus,
svcType,
svcDescription,
svcAdminStatus,
svcOperStatus,
svcNumSaps,
svcNumSdps,
svcLastMgmtChange,
svcVpnId
}
STATUS current
DESCRIPTION
"The group of objects supporting management of Svc general
capabilities on T-Metro series systems."
::= { prvtTMSvcGroups 1 }

prvtTMSvcNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
prvtSvcCreated,
prvtSvcDeleted
}
STATUS current
DESCRIPTION
"The group of notifications supporting the Services
on T-Metro series systems."
::= { prvtTMSvcGroups 2 }

-- ----------------------------------------------
-- Service SAP OBJECT-GROUPs
-- ----------------------------------------------

prvtTMSapGlobalGroup OBJECT-GROUP
OBJECTS {
sapNumEntries,
sapPortId,
sapEncapValue,
sapRowStatus,
sapType,
sapDescription,
sapAdminStatus,
sapOperStatus,
sapIngressQosPolicyId,
sapEgressQosPolicyId,
sapLastMgmtChange
}
STATUS current
DESCRIPTION
"The group of objects supporting management of Services SAP general
capabilities on T-Metro series systems."
::= { prvtTMSapGroups 1 }

prvtTMSapNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
prvtSapStatusChanged,
prvtSapCreated,
prvtSapDeleted
}
STATUS current
DESCRIPTION
"The group of notifications supporting the Sap feature
on T-Metro series systems."
::= { prvtTMSapGroups 2 }

-- ----------------------------------------------
-- Service SDP OBJECT-GROUPs
-- ----------------------------------------------

prvtTMSdpGlobalGroup OBJECT-GROUP
OBJECTS {
sdpNumEntries,
sdpId,
sdpNextFreeId,
sdpRowStatus,
sdpDelivery,
sdpFarEndIpAddress,
sdpDescription,
sdpLabelSignaling,
sdpAdminStatus,
sdpOperStatus,
sdpLastMgmtChange,
sdpLdpEnabled 
}
STATUS current
DESCRIPTION
"The group of objects supporting management of Services SDP general
capabilities on T-Metro series systems."
::= { prvtTMSdpGroups 1 }

END