-- ********************************************************************* -- ** -- ** BATM Advanced Communications. -- ** -- ********************************************************************* -- ** Filename: PRVT-LMGR-MIB.mib -- ** Project: T-Metro Switches. -- ** Purpose: Private MIB -- ********************************************************************* -- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved. -- WARNING: -- -- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING: -- -- This file is the property of BATM Advanced Communications and contains -- proprietary and confidential information. This file is made -- available to authorized BATM customers on the express -- condition that neither it, nor any of the information contained -- therein, shall be disclosed to third parties or be used for any -- purpose other than to replace, modify or upgrade firmware and/or -- software components of BATM manufactured equipment within the -- authorized customer's network, and that such transfer be -- completed in accordance with the instructions provided by -- BATM. Any other use is strictly prohibited. -- -- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED -- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE -- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED -- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES -- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -- -- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER -- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS -- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR -- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY -- TO USE, THE SOFTWARE CONTAINED IN THIS FILE. -- -- ---------------------------------------------------------------------------- PRVT-LMGR-MIB DEFINITIONS ::= BEGIN IMPORTS InetAddressType FROM INET-ADDRESS-MIB mpls FROM PRVT-SWITCH-MIB IpAddress, MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI RowStatus, TEXTUAL-CONVENTION FROM SNMPv2-TC; prvtLmgrMIB MODULE-IDENTITY LAST-UPDATED "200606110000Z" ORGANIZATION "BATM Advanced Communication" CONTACT-INFO "BATM/Telco Systems Support team Email: For North America: techsupport@telco.com For North Europe: support@batm.de, info@batm.de For the rest of the world: techsupport@telco.com" DESCRIPTION "The MIB module for management of the PRVT-LMGR product." REVISION "200606110000Z" DESCRIPTION "Initial" ::= { mpls 4 } PrvtLmgrAdminStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The desired administrative state of a Label Manager entity." SYNTAX INTEGER { up(1), down(2) } PrvtLmgrOperStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The current operational state of a Label Manager entity. If the operational state is goingDown then a request to activate the Label Manager entity is rejected." SYNTAX INTEGER { up(1), down(2), goingUp(3), goingDown(4), actFailed(5) } PrvtLmgrPartnerStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The state of a Label Manager partner entity." SYNTAX INTEGER { initial(0), activating(1), active(2), deactivating(3), failedOver(4), failed(5), unavailable(6) } PrvtLmgrIndex ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The index value identifying a Label Manager entity." SYNTAX Unsigned32 PrvtLmgrControlModes ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The Control Mode of Label Manager." SYNTAX INTEGER { ordered(1), independent(2) } prvtLmgrObjects OBJECT IDENTIFIER ::= { prvtLmgrMIB 1 } prvtLmgrLsrEntityTable OBJECT-TYPE SYNTAX SEQUENCE OF PrvtLmgrLsrEntityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents an instance of the Label Manager. Each instance is identified by LSR index." ::= { prvtLmgrObjects 2 } prvtLmgrLsrEntityEntry OBJECT-TYPE SYNTAX PrvtLmgrLsrEntityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents a Label Manager entity." INDEX { prvtlmgrLsrEntityLsrIndex } ::= { prvtLmgrLsrEntityTable 1 } PrvtLmgrLsrEntityEntry ::= SEQUENCE { prvtlmgrLsrEntityLsrIndex PrvtLmgrIndex, prvtLmgrLsrEntityRowStatus RowStatus, prvtLmgrLsrEntityAdminStatus PrvtLmgrAdminStatus, prvtLmgrLsrEntityOperStatus PrvtLmgrOperStatus, prvtLmgrLsrEntityLsrId Unsigned32, prvtLmgrLsrEntityTranAddrType InetAddressType, prvtLmgrLsrEntityTranAddrLen Unsigned32, prvtLmgrLsrEntityTranAddr OCTET STRING } prvtlmgrLsrEntityLsrIndex OBJECT-TYPE SYNTAX PrvtLmgrIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "LSR index for this prvtLmgrLsrEntityEntry. This is the entity index passed in the Label Manager create parameters." ::= { prvtLmgrLsrEntityEntry 1 } prvtLmgrLsrEntityRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status for the Label Manager table entry, used to create and destroy table entries. When prvtLmgrLsrEntityRowStatus is 'active' and prvtLmgrLsrEntityAdminStatus is 'up' Label Manager is active and only these two fields and prvtLmgrLsrEntityMinLsiBuffers can be modified." ::= { prvtLmgrLsrEntityEntry 2 } prvtLmgrLsrEntityAdminStatus OBJECT-TYPE SYNTAX PrvtLmgrAdminStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Administrative status for Label Manager. When prvtLmgrLsrEntityRowStatus is 'active' and prvtLmgrLsrEntityAdminStatus is 'up' Label Manager is active and only these two fields and prvtLmgrLsrEntityMinLsiBuffers can be modified." ::= { prvtLmgrLsrEntityEntry 3 } prvtLmgrLsrEntityOperStatus OBJECT-TYPE SYNTAX PrvtLmgrOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational status of the Label Manager entity." ::= { prvtLmgrLsrEntityEntry 4 } prvtLmgrLsrEntityLsrId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "An ID that uniquely identifies this LSR within the network. The LSR ID is typically derived from one of the LSR's IP addresses. It may be used for path vector based loop detection if the signaling protocol in use implements that. A value of zero indicates that no LSR ID has been configured. In this case, the signaling protocol stack should construct a unique LSR ID from the other information that is available to it (such as IP addresses). For example, PRVT-CR-LDP and PRVT-RSVP derive the LSR ID by taking the 32 low bits of the following _transport_address_ field, left padding with zeros if necessary. The LSR ID is only used to identify this LSR on IPv4 networks. See dcLmgrLsrEntityIpv6TranAddr for equivalent function for use in IPv6 networks." ::= { prvtLmgrLsrEntityEntry 5 } prvtLmgrLsrEntityTranAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of the internetwork layer address used as the transport address. Currently this must be IPv4. See dcLmgrLsrEntityIpv6TranAddr, below, for the equivalent field for use in IPv6 networks. The transport address is used by LDP as the source transport address for LDP Hello messages for the global (per-platform) label space. The transport address is used by RSVP as the source address for messages originating on unnumbered interfaces. This object indicates how the value of mplsLdpEntityTransAddr is to be interpreted." ::= { prvtLmgrLsrEntityEntry 6 } prvtLmgrLsrEntityTranAddrLen OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The length of the internetwork layer address used as the transport address for LDP Hello messages in the global label space and for messages originating on unnumbered interfaces in RSVP. Currently this must be an IPv4 address. This object indicates how many elements of the mplsLdpEntityTransAddr array are valid. This value must not exceed _LMGR_LSR_ADDR_LEN_." ::= { prvtLmgrLsrEntityEntry 7 } prvtLmgrLsrEntityTranAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4 | 16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the internetwork layer address used as the transport address for LDP Hello messages in the global label space and for messages originating on unnumbered interfaces in RSVP. This must be an IPv4 address. See dcLmgrLsrEntityIpv6TranAddr, below, for the equivalent field for use in IPv6 networks. If the transport address is not set, then _lsr_id_ must be set to zero. In this case, the transport address and LSR ID are taken from an address on the Interface Information Interface." ::= { prvtLmgrLsrEntityEntry 8 } prvtLmgrLsrLspXcTable OBJECT-TYPE SYNTAX SEQUENCE OF PrvtLmgrLsrLspXcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents an instance of an LSP cross-conect between a single in-segment and a single out-segment." ::= { prvtLmgrObjects 3 } prvtLmgrLsrLspXcEntry OBJECT-TYPE SYNTAX PrvtLmgrLsrLspXcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents an LSP cross connect." INDEX { prvtlmgrLsrEntityLsrIndex, prvtLmgrLsrLspXcIndex, prvtLmgrLsrLspInSegLabel, prvtLmgrLsrLspOutSegIndex } ::= { prvtLmgrLsrLspXcTable 1 } PrvtLmgrLsrLspXcEntry ::= SEQUENCE { prvtLmgrLsrLspXcIndex Unsigned32, prvtLmgrLsrLspInSegIndex Unsigned32, prvtLmgrLsrLspInSegIfIndex Unsigned32, prvtLmgrLsrLspInSegLabel Unsigned32, prvtLmgrLsrLspOutSegIndex Unsigned32, prvtLmgrLsrLspOutSegIfIndex Unsigned32, prvtLmgrLsrLspOutSegLabel Unsigned32, prvtLmgrLsrLspOutSegNextHopAddr IpAddress } prvtLmgrLsrLspXcIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "XC index for this prvtLmgrLsrLspXc. This is the XC index assigned by Label Manager for the LSP." ::= { prvtLmgrLsrLspXcEntry 2 } prvtLmgrLsrLspInSegIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the in segment. This is the index assigned by Label Manager for the in segment." ::= { prvtLmgrLsrLspXcEntry 3 } prvtLmgrLsrLspInSegIfIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "If index for the in segment. This is the If index specified on setting up the in segment." ::= { prvtLmgrLsrLspXcEntry 4 } prvtLmgrLsrLspInSegLabel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Top label for the in segment. This is the Label assigned by Label Manager Label Library for the in segment." ::= { prvtLmgrLsrLspXcEntry 5 } prvtLmgrLsrLspOutSegIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the out segment. This is the index assigned by Label Manager for the out segment." ::= { prvtLmgrLsrLspXcEntry 6 } prvtLmgrLsrLspOutSegIfIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Interface Index for the out segment. This is the interface index specified when setting up the out segment." ::= { prvtLmgrLsrLspXcEntry 7 } prvtLmgrLsrLspOutSegLabel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Top label for the out segment. This is the label specified by the remote LSR for the out segment." ::= { prvtLmgrLsrLspXcEntry 8 } prvtLmgrLsrLspOutSegNextHopAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Next hop address for the out segment. This is the address specified by the remote LSR for the out segment." ::= { prvtLmgrLsrLspXcEntry 9 } END -- end of module PRVT-LMGR-MIB.