-- ********************************************************************* -- ** -- ** BATM Advanced Communications. -- ** -- ********************************************************************* -- ** Filename: PRVT-MPLS-TE-MIB.mib -- ** Project: T-Metro Switches. -- ** Purpose: Private MIB -- ********************************************************************* -- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved. -- WARNING: -- -- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING: -- -- This file is the property of BATM Advanced Communications and contains -- proprietary and confidential information. This file is made -- available to authorized BATM customers on the express -- condition that neither it, nor any of the information contained -- therein, shall be disclosed to third parties or be used for any -- purpose other than to replace, modify or upgrade firmware and/or -- software components of BATM manufactured equipment within the -- authorized customer's network, and that such transfer be -- completed in accordance with the instructions provided by -- BATM. Any other use is strictly prohibited. -- -- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED -- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE -- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED -- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES -- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -- -- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER -- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS -- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR -- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY -- TO USE, THE SOFTWARE CONTAINED IN THIS FILE. -- -- ---------------------------------------------------------------------------- PRVT-MPLS-TE-MIB DEFINITIONS ::= BEGIN IMPORTS mpls FROM PRVT-SWITCH-MIB prvtMplsTeMibEntityIndex FROM PRVT-TEMIB-ENTITY-MIB Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI RowStatus, TEXTUAL-CONVENTION, TruthValue FROM SNMPv2-TC; prvtMplsTeMIB MODULE-IDENTITY LAST-UPDATED "200902100000Z" ORGANIZATION "BATM Advanced Communication" CONTACT-INFO "BATM/Telco Systems Support team Email: For North America: techsupport@telco.com For North Europe: support@batm.de, info@batm.de For the rest of the world: techsupport@telco.com" DESCRIPTION "This MIB module contains managed object definitions for MPLS Traffic Engineering (TE) as defined in: Extensions to RSVP for LSP Tunnels, Awduche et al, Internet Draft , August 2000; Constraint-Based LSP Setup using LDP, B. Jamoussi, Internet Draft , July 2000; Requirements for Traffic Engineering Over MPLS, Awduche, D., J. Malcolm, J., Agogbua, J., O'Dell, M., J. McManus, , September 1999." REVISION "200902100000Z" DESCRIPTION "Initial version." ::= { mpls 2 } MplsPathIndexOrZero ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "A unique identifier used to identify a specific path used by a tunnel. A value of 0 (zero) means that no path is in use." SYNTAX Unsigned32 (0..4294967295) MplsTunnelInstanceIndex ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The tunnel entry with instance index 0 should refer to the configured tunnel interface (if one exists). Values greater than 0, but less than or equal to 65535, should be used to indicate signaled (or backup) tunnel LSP instances. For tunnel LSPs signaled using RSVP, this value should correspond to the RSVP LSP ID used for the RSVP-TE LSP. Values greater than 65535 apply to FRR detour instances." SYNTAX Unsigned32 (0..4294967295) TeHopAddressAS ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "Represents a two or four octet AS number. The AS number is represented in network byte order (MSB first). A two-octet AS number has the two MSB octets set to zero." REFERENCE "Textual Conventions for Internet Network Addresses, [RFC3291]." SYNTAX Unsigned32 TeHopAddressUnnum ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "Represents an unnumbered interface: octets contents encoding 1-4 unnumbered interface network-byte order The corresponding TeHopAddressType value is unnum(4)." SYNTAX Unsigned32 TeHopAddress ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Denotes a generic Tunnel hop address, that is, the address of a node which an LSP traverses, including the source and destination nodes. An address may be very concrete, for example, an IPv4 host address (i.e., with prefix length 32); if this IPv4 address is an interface address, then that particular interface must be traversed. An address may also specify an 'abstract node', for example, an IPv4 address with prefix length less than 32, in which case, the LSP can traverse any node whose address falls in that range. An address may also specify an Autonomous System (AS), in which case the LSP can traverse any node that falls within that AS. A TeHopAddress value is always interpreted within the context of an TeHopAddressType value. Every usage of the TeHopAddress TEXTUAL-CONVENTION is required to specify the TeHopAddressType object which provides the context. It is suggested that the TeHopAddressType object is logically registered before the object(s) which use the TeHopAddress TEXTUAL-CONVENTION if they appear in the same logical row. The value of a TeHopAddress object must always be consistent with the value of the associated TeHopAddressType object. Attempts to set a TeHopAddress object to a value which is inconsistent with the associated TeHopAddressType must fail with an inconsistentValue error." SYNTAX OCTET STRING (SIZE(0..32)) TeHopAddressType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A value that represents a type of address for a Traffic Engineered (TE) Tunnel hop. unknown(0) An unknown address type. This value MUST be used if the value of the corresponding TeHopAddress object is a zero-length string. It may also be used to indicate a TeHopAddress which is not in one of the formats defined below. ipv4(1) An IPv4 network address as defined by the InetAddressIPv4 TEXTUAL-CONVENTION [RFC3291]. ipv6(2) A global IPv6 address as defined by the InetAddressIPv6 TEXTUAL-CONVENTION [RFC3291]. asnumber(3) An Autonomous System (AS) number as defined by the TeHopAddressAS TEXTUAL-CONVENTION. unnum(4) An unnumbered interface index as defined by the TeHopAddressUnnum TEXTUAL-CONVENTION. lspid(5) An LSP ID for TE Tunnels (RFC3212) as defined by the MplsLSPID TEXTUAL-CONVENTION. -- private Addition unnumv6(6) An unnumbered IPv6 interface index as defined by the TeHopAddressUnnumV6 TEXTUAL-CONVENTION. -- End private Addition Each definition of a concrete TeHopAddressType value must be accompanied by a definition of a TEXTUAL-CONVENTION for use with that TeHopAddress. To support future extensions, the TeHopAddressType TEXTUAL-CONVENTION SHOULD NOT be sub-typed in object type definitions. It MAY be sub-typed in compliance statements in order to require only a subset of these address types for a compliant implementation. Implementations must ensure that TeHopAddressType objects and any dependent objects (e.g., TeHopAddress objects) are consistent. An inconsistentValue error must be generated if an attempt to change a TeHopAddressType object would, for example, lead to an undefined TeHopAddress value that is not defined herein. In particular, TeHopAddressType/TeHopAddress pairs must be changed together if the address type changes (e.g., from ipv6(2) to ipv4(1))." REFERENCE "TEXTUAL-CONVENTIONs for Internet Network Addresses, RFC3291. Constraint-Based LSP Setup using LDP, [RFC3212]" SYNTAX INTEGER { unknown(0), ipv4(1), ipv6(2), asnumber(3), unnum(4), lspid(5), unnumv6(6) } MplsOwner ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This object indicates the local network management subsystem that originally created the object(s) in question. The values of this enumeration are defined as follows: unknown(1) - the local network management subsystem cannot discern which component created the object. other(2) - the local network management subsystem is able to discern which component created the object, but the component is not listed within the following choices, e.g., command line interface (cli). snmp(3) - The Simple Network Management Protocol was used to configure this object initially. ldp(4) - The Label Distribution Protocol was used to configure this object initially. crldp(5) - The Constraint-Based Label Distribution Protocol was used to configure this object initially. rsvpTe(6) - The Resource Reservation Protocol was used to configure this object initially. policyAgent(7) - A policy agent (perhaps in combination with one of the above protocols) was used to configure this object initially. mplsVpn(8) - This label was configured for MPLS/BGP VPNs as defined in RFC2547. cli(9) - The CLI was used to configure this object initially. dynamic(10) - The tunnel has been created dynamically. An object created by any of the above choices MAY be modified or destroyed by the same or a different choice." SYNTAX INTEGER { unknown(1), other(2), snmp(3), ldp(4), crldp(5), rsvpTe(6), policyAgent(7), mplsVpn(8), cli(9), dynamic(10) } MplsPathIndex ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "A unique value to index (by Path number) an entry in a table." SYNTAX Unsigned32 (1..4294967295) MplsTunnelAffinity ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "Describes the configured 32-bit Include-any, include-all, or exclude-all constraint for constraint-based link selection." REFERENCE "RSVP-TE: Extensions to RSVP for LSP Tunnels, RFC3209, Section 4.7.4." SYNTAX Unsigned32 (0..4294967295) MplsLSPID ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A unique identifier within an MPLS network that is assigned to each LSP. This is assigned at the head end of the LSP and can be used by all LSRs to identify this LSP. This value is piggybacked by the signaling protocol when this LSP is signaled within the network. This identifier can then be used at each LSR to identify which labels are being swapped to other labels for this LSP. This object can also be used to disambiguate LSPs that share the same RSVP sessions between the same source and destination. For LSPs established using CR-LDP, the LSPID is composed of the ingress LSR Router ID (or any of its own IPv4 addresses) and a locally unique CR-LSP ID to that LSR. The first two bytes carry the CR-LSPID, and the remaining 4 bytes carry the Router ID. The LSPID is useful in network management, in CR-LSP repair, and in using an already established CR-LSP as a hop in an ER-TLV. For LSPs signaled using RSVP-TE, the LSP ID is defined as a 16-bit (2 byte) identifier used in the SENDER_TEMPLATE and the FILTER_SPEC that can be changed to allow a sender to share resources with itself. The length of this object should only be 2 or 6 bytes. If the length of this octet string is 2 bytes, then it must identify an RSVP-TE LSPID, or it is 6 bytes, it must contain a CR-LDP LSPID." REFERENCE "RSVP-TE: Extensions to RSVP for LSP Tunnels, [RFC3209]. Constraint-Based LSP Setup using LDP, [RFC3212]." SYNTAX OCTET STRING (SIZE(2 | 6 | 32)) MplsBurstSize ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The number of octets of MPLS data that the stream may send back-to-back without concern for policing. The value of zero indicates that an implementation does not support Burst Size." SYNTAX Unsigned32 (0..4294967295) MplsBitRate ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "If the value of this object is greater than zero, then this represents the bandwidth of this MPLS interface (or Label Switched Path) in units of '1,000 bits per second'. The value, when greater than zero, represents the bandwidth of this MPLS interface (rounded to the nearest 1,000) in units of 1,000 bits per second. If the bandwidth of the MPLS interface is between ((n * 1000) - 500) and ((n * 1000) + 499), the value of this object is n, such that n > 0. If the value of this object is 0 (zero), this means that the traffic over this MPLS interface is considered to be best effort." SYNTAX Unsigned32 (0..4294967295) MplsExtendedTunnelIdOctetType ::= TEXTUAL-CONVENTION DISPLAY-HINT "1d.1d.1d.1d" STATUS current DESCRIPTION "A unique identifier for an MPLS Tunnel. This represents an IPv4 address of the ingress or egress LSR for the tunnel. This value is derived from the Extended Tunnel Id in RSVP or the Ingress Router ID for CR-LDP. Currently, only octet string sizes of 4 are supported. String sizes of 16 are reserved for future use." REFERENCE "RSVP-TE: Extensions to RSVP for LSP Tunnels, [RFC3209]. Constraint-Based LSP Setup using LDP, [RFC3212]." SYNTAX OCTET STRING (SIZE(4 | 16)) MplsTunnelStorageType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Same as StorageType from SNMPv2-TC, except with unknown(0)." SYNTAX INTEGER { unknown(0), other(1), volatile(2), nonVolatile(3), permanent(4), readOnly(5) } MplsTunnelInterfaceIndexOrZero ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "This textual convention is an extension of the IF-MIB::InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits the additional value of zero. The value zero is object-specific and must therefore be defined as part of the description of any object which uses this syntax. Examples of the usage of zero might include situations where interface was unknown, or when none or all interfaces need to be referenced." SYNTAX Integer32 (0..2147483647) MplsGeneralizedLabelType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The label types that are defined for Generalized MPLS." SYNTAX INTEGER { notValid(0), mplsLabel(1), generalizedLabel(2), wavebandLabel(3) } MplsTunnelPrivateDataSyntax ::= TEXTUAL-CONVENTION DISPLAY-HINT "1x:" STATUS current DESCRIPTION "Represents private data field." SYNTAX OCTET STRING (SIZE(0..24)) MplsTunnelTNAAddress ::= TEXTUAL-CONVENTION DISPLAY-HINT "1x:" STATUS current DESCRIPTION "TNA address of a tunnel." SYNTAX OCTET STRING (SIZE(0..20)) MplsGeneralizedLabel ::= TEXTUAL-CONVENTION DISPLAY-HINT "1x:" STATUS current DESCRIPTION "This value represents a generalized MPLS Label. The label contents are specific to the label being represented. Wherever an MplsGeneralizedLabel is copied to or from a signaling protocol message, it is copied byte for byte as is. Therefore, if the octet string is intended to represent multibyte values, it encodes those values in network (big-endian) byte order. This interpretation applies in particular to the non-generalized MPLS labels (32 bits) used in ATM, FR and generic MPLS networks." SYNTAX OCTET STRING (SIZE(0..255)) MplsTeObjectReservedTC ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "TC for mplsTeObjectReserved* objects." SYNTAX Integer32 mplsTeNotifications OBJECT IDENTIFIER ::= { prvtMplsTeMIB 0 } mplsTeObjects OBJECT IDENTIFIER ::= { prvtMplsTeMIB 1 } mplsTeObjectReserved1 OBJECT-TYPE SYNTAX MplsTeObjectReservedTC MAX-ACCESS read-write STATUS current DESCRIPTION "This object is reserved for future use." ::= { mplsTeObjects 1 } mplsManTunnelTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsManTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The mplsManTunnelTable allows new MPLS tunnels to be created between an LSR and a remote endpoint, and existing tunnels to be reconfigured or removed. Note that only point-to-point tunnel segments are supported, although multi-point-to-point and point- to-multi-point connections are supported by an LSR acting as a cross-connect. Each MPLS tunnel can thus have one out-segment originating at this LSR and/or one in-segment terminating at this LSR. To configure tunnels where the ingress and egress routers are identified by IPv6 addresses, the following approach is used. - The mplsManTunnelIngressLSRId and mplsManTunnelEgressLSRId fields are set to 32-bit identifiers for the ingress and egress routers. - mplsManTunnelHopTableIndex must be set to a non-zero value. - The first hop in the hop table for the tunnel path must be set to a global scope IPv6 address of the local router. - The last entry in the hop table must be set to a global scope IPv6 address of the egress router." ::= { mplsTeObjects 2 } mplsManTunnelEntry OBJECT-TYPE SYNTAX MplsManTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table represents an MPLS tunnel. An entry can be created by a network administrator or by an SNMP agent as instructed by an MPLS signaling protocol. Whenever a new entry is created with mplsManTunnelIsIf set to true(1), then a corresponding entry is created in ifTable as well (see RFC 2233). The ifType of this entry is mplsTunnel(150)." INDEX { prvtMplsTeMibEntityIndex, mplsManTunnelIndex, mplsManTunnelInstance } ::= { mplsManTunnelTable 1 } MplsManTunnelEntry ::= SEQUENCE { mplsManTunnelIndex Integer32, mplsManTunnelInstance MplsTunnelInstanceIndex, mplsManTunnelRowStatus RowStatus, mplsManTunnelIngressLSRId MplsExtendedTunnelIdOctetType, mplsManTunnelEgressLSRId MplsExtendedTunnelIdOctetType, mplsManTunnelName OCTET STRING, mplsManTunnelDescr OCTET STRING, mplsManTunnelIfIndex MplsTunnelInterfaceIndexOrZero, mplsManTunnelSetupPrio Integer32, mplsManTunnelHoldingPrio Integer32, mplsManTunnelSessionAttributes BITS, mplsManTunnelLocalProtectInUse TruthValue, mplsManTunnelHopTableIndex MplsPathIndexOrZero, mplsManTunnelPathInUse MplsPathIndexOrZero, mplsManTunnelIncludeAnyAffinity MplsTunnelAffinity, mplsManTunnelIncludeAllAffinity MplsTunnelAffinity, mplsManTunnelExcludeAnyAffinity MplsTunnelAffinity, mplsManTunnelAdminStatus INTEGER, mplsManTunnelOperStatus INTEGER, mplsManTunnelAttributes BITS, mplsManTunnelPathComp INTEGER, mplsManTunnelFastRerouteMode INTEGER, mplsManTunnelBackupSetupPrio Integer32, mplsManTunnelBackupHoldingPrio Integer32, mplsManTunnelBackupIncAny MplsTunnelAffinity, mplsManTunnelBackupIncAll MplsTunnelAffinity, mplsManTunnelBackupExcAny MplsTunnelAffinity, mplsManTunnelBackupBandwidth MplsBitRate, mplsManTunnelBackupMaxHops Unsigned32, mplsManTunnelMtu Integer32, mplsManTunnelRebuildTimer Unsigned32, mplsManTunnelOperStatusFlags BITS, mplsManTunnelGuardedDest IpAddress, mplsManTunnelMBBTimeOut Integer32, mplsManTunnelOwner MplsOwner, mplsManTunnelARHopTableIndex MplsPathIndexOrZero, mplsManTunnelCHopTableIndex MplsPathIndexOrZero } mplsManTunnelIndex OBJECT-TYPE SYNTAX Integer32 (1..32638) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Uniquely identifies this row." ::= { mplsManTunnelEntry 1 } mplsManTunnelInstance OBJECT-TYPE SYNTAX MplsTunnelInstanceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Uniquely identifies an instance of a tunnel. It is useful to identify multiple instances of tunnels for the purposes of backup and parallel tunnels." ::= { mplsManTunnelEntry 2 } mplsManTunnelRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified by the agent except mplsManTunnelAdminStatus, mplsManTunnelRowStatus and mplsManTunnelStorageType." ::= { mplsManTunnelEntry 3 } mplsManTunnelIngressLSRId OBJECT-TYPE SYNTAX MplsExtendedTunnelIdOctetType MAX-ACCESS read-create STATUS current DESCRIPTION "Identity of the ingress LSR associated with this tunnel instance. When the MPLS signalling protocol is rsvp(2) this value SHOULD be equal to the Tunnel Sender Address in the Sender Template object and MAY be equal to the Extended Tunnel Id field in the SESSION object. When the MPLS signalling protocol is crldp(3) this value SHOULD be equal to the Ingress LSR Router ID field in the LSPID TLV object." REFERENCE "1. RSVP-TE: Extensions to RSVP for LSP Tunnels, Awduche et al, RFC 3209, December 2001 2. Constraint-Based LSP Setup using LDP, Jamoussi (Editor), RFC 3212, January 2002" ::= { mplsManTunnelEntry 4 } mplsManTunnelEgressLSRId OBJECT-TYPE SYNTAX MplsExtendedTunnelIdOctetType MAX-ACCESS read-create STATUS current DESCRIPTION "Identity of the egress LSR associated with this tunnel instance." ::= { mplsManTunnelEntry 5 } mplsManTunnelName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The canonical name assigned to the tunnel. This name can be used to refer to the tunnel on the LSRs console port. Also see the description of ifName in RFC 2863." REFERENCE "RFC 2863 - The Interfaces Group MIB, McCloghrie, K., and F. Kastenholtz, June 2000" ::= { mplsManTunnelEntry 6 } mplsManTunnelDescr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "A textual string containing information about the tunnel. If there is no description this object contains a zero length string. This object may not be signaled by MPLS signaling protocols, consequentally the value of this object at transit and egress LSRs MAY be automatically generated or absent." ::= { mplsManTunnelEntry 7 } mplsManTunnelIfIndex OBJECT-TYPE SYNTAX MplsTunnelInterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "If mplsManTunnelIsIf is set to true, then this value contains the LSR-assigned ifIndex which corresponds to an entry in the interfaces table. Otherwise this variable should contain the value of zero indicating that a valid ifIndex was not assigned to this tunnel interface." REFERENCE "RFC 2863 - The Interfaces Group MIB, McCloghrie, K., and F. Kastenholtz, June 2000" ::= { mplsManTunnelEntry 8 } mplsManTunnelSetupPrio OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the setup priority of this tunnel." REFERENCE "1. RSVP-TE: Extensions to RSVP for LSP Tunnels, Awduche et al, RFC 3209, December 2001 2. Constraint-Based LSP Setup using LDP, Jamoussi (Editor), RFC 3212, January 2002" ::= { mplsManTunnelEntry 9 } mplsManTunnelHoldingPrio OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the holding priority for this tunnel." REFERENCE "1. RSVP-TE: Extensions to RSVP for LSP Tunnels, Awduche et al, RFC 3209, December 2001 2. Constraint-Based LSP Setup using LDP, Jamoussi (Editor), RFC 3212, January 2002" ::= { mplsManTunnelEntry 10 } mplsManTunnelSessionAttributes OBJECT-TYPE SYNTAX BITS { fastReroute(0), mergingPermitted(1), isPersistent(2), isPinned(3), recordRoute(4), reserved5(5), bandwidthProtect(6), nodeProtect(7) } MAX-ACCESS read-create STATUS current DESCRIPTION "This bitmask indicates optional session values for this tunnel. The following describes these bit fields: fastReroute This flag indicates that any tunnel hop may choose to reroute this tunnel without tearing it down. This flag permits transit routers to use a local repair mechanism which may result in violation of the explicit routing of this tunnel. When a fault is detected on an adjacent downstream link or node, a transit router can reroute traffic for fast service restoration. mergingPermitted This flag permits transit routers to merge this session with other RSVP sessions for the purpose of reducing resource overhead on downstream transit routers, thereby providing better network scalability. isPersistent Indicates whether this tunnel should be restored automatically after a failure occurs. isPinned This flag indicates whether the loose- routed hops of this tunnel are to be pinned. recordRoute This flag indicates if the signaling protocol should remember the tunnel path after it has been signaled. -- recordLabels This flag indicates if the -- signaling protocol should record labels as well as -- the tunnel path. bandwidthProtect This flag indicates whether fast reroute bandwidth protection is desired. nodeProtect This flag indicates whether fast reroute node protection is desired." REFERENCE "1. RSVP-TE: Extensions to RSVP for LSP Tunnels, Awduche et al, RFC 3209, December 2001." ::= { mplsManTunnelEntry 11 } mplsManTunnelLocalProtectInUse OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates that the local repair mechanism is in use to maintain this tunnel (usually in the face of an outage of the link it was previously routed over)." ::= { mplsManTunnelEntry 12 } mplsManTunnelHopTableIndex OBJECT-TYPE SYNTAX MplsPathIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "Index into the mplsTunnelManHopTable entry that specifies the explicit route hops for this tunnel. This object is meaningful only at the head-end of the tunnel. For UNI tunnels, this field should be set to 0. For tunnels with no configured explicit route hops, this field should be set to 0. In this case, the tunnel is routed using mplsTunnelEgressLSRId." ::= { mplsManTunnelEntry 13 } mplsManTunnelPathInUse OBJECT-TYPE SYNTAX MplsPathIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "This value denotes the configured path that was chosen for this tunnel. This value reflects the secondary index into mplsTunnelManHopTable. This path may not exactly match the one in mplsTunnelARHopTable due to the fact that some CSPF modification may have taken place. See mplsTunnelARHopTable for the actual path being taken by the tunnel. A value of zero denotes that no path is currently in use or available. For UNI tunnels, this field should be set to 0. For tunnels with no configued explicit route hops, this field should be set to 0." ::= { mplsManTunnelEntry 14 } mplsManTunnelIncludeAnyAffinity OBJECT-TYPE SYNTAX MplsTunnelAffinity MAX-ACCESS read-create STATUS current DESCRIPTION "A link satisfies the include-any constraint if and only if the constraint is zero, or the link and the constraint have a resource class in common. The field is a bitmask. Every request does not overwrite the previous one. 0 value resets the field." REFERENCE "1. RSVP-TE: Extensions to RSVP for LSP Tunnels, Awduche et al, RFC 3209, December 2001." ::= { mplsManTunnelEntry 15 } mplsManTunnelIncludeAllAffinity OBJECT-TYPE SYNTAX MplsTunnelAffinity MAX-ACCESS read-create STATUS current DESCRIPTION "A link satisfies the include-all constraint if and only if the link contains all of the administrative groups specified in the constraint. The field is a bitmask. Every request does not overwrite the previous one. 0 value resets the field." REFERENCE "1. RSVP-TE: Extensions to RSVP for LSP Tunnels, Awduche et al, RFC 3209, December 2001." ::= { mplsManTunnelEntry 16 } mplsManTunnelExcludeAnyAffinity OBJECT-TYPE SYNTAX MplsTunnelAffinity MAX-ACCESS read-create STATUS current DESCRIPTION "A link satisfies the exclude-any constraint if and only if the link contains none of the administrative groups specified in the constraint. The field is a bitmask. Every request does not overwrite the previous one. 0 value resets the field." REFERENCE "1. RSVP-TE: Extensions to RSVP for LSP Tunnels, Awduche et al, RFC 3209, December 2001." ::= { mplsManTunnelEntry 17 } mplsManTunnelAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the desired operational status of this tunnel." ::= { mplsManTunnelEntry 18 } mplsManTunnelOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3), unknown(4), dormant(5), notPresent(6), lowerLayerDown(7), resignaling(8), suppressed(9), preempted(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the actual operational status of this tunnel, which is typically but not limited to, a function of the state of individual segments of this tunnel." ::= { mplsManTunnelEntry 19 } mplsManTunnelAttributes OBJECT-TYPE SYNTAX BITS { reserved0(0), reserved1(1), reserved2(2), reserved3(3), reserved4(4), labelRecordingDesired(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "This bitmask indicates optional parameters for this tunnel. These bits should be taken in addition to those defined in mplsManTunnelSessionAttributes in order to determine the full set of options to be signaled (for example SESSION_ATTRIBUTES flags in RSVP-TE). The following describes these bitfields: labelRecordingDesired This flag indicates that label information should be included when doing a route record. This bit is not valid unless the recordRoute bit is set in the mplsManTunnelSessionAttributes object." REFERENCE "RSVP-TE: Extensions to RSVP for LSP Tunnels, Awduche et al., RFC 3209, December 2001." ::= { mplsManTunnelEntry 20 } mplsManTunnelPathComp OBJECT-TYPE SYNTAX INTEGER { dynamicFull(1), explicit(2), dynamicPartial(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This value instructs the source node on how to perform path computation on the explicit route specified by the associated entries in the mplsTunnelManHopTable. dynamicFull The user specifies at least the source and destination of the path and expects that the CSPF will calculate the remainder of the path. explicit The user specifies the entire path for the tunnel to take. This path may contain strict or loose hops. Evaluation of the explicit route will be performed hop by hop through the network. dynamicPartial The user specifies at least the source and destination of the path and expects that the CSPF will calculate the remainder of the path. The path computed by CSPF is allowed to be only partially computed allowing the remainder of the path to be filled in across the network. This object deprecates mplsTunnelManHopEntryPathComp." ::= { mplsManTunnelEntry 21 } mplsManTunnelFastRerouteMode OBJECT-TYPE SYNTAX INTEGER { noFastReroute(0), detourFastReroute(1), facilityFastReroute(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates whether or not this tunnel should be protected by a fast reroute mechanism, and if so which method should be used. noFastReroute - no fast reroute protection. detourFastReroute - fast reroute protection using the one-to-one detour backup method. facilityFastReroute - fast reroute protection using the facility backup method. Fast reroute is only available for uni-directional LSPs." ::= { mplsManTunnelEntry 22 } mplsManTunnelBackupSetupPrio OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "Setup priority for backup tunnels set up to protect this tunnel. This field is only valid if the mplsManTunnelFastRerouteMode above is not noFastReroute." ::= { mplsManTunnelEntry 23 } mplsManTunnelBackupHoldingPrio OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "Holding priority for backup tunnels set up to protect this tunnel. This field is only valid if the mplsManTunnelFastRerouteMode above is not noFastReroute." ::= { mplsManTunnelEntry 24 } mplsManTunnelBackupIncAny OBJECT-TYPE SYNTAX MplsTunnelAffinity MAX-ACCESS read-create STATUS current DESCRIPTION "Include-any resource affinity for backup tunnels set up to protect this tunnel. A link satisfies the include-any constraint if and only if the constraint is zero, or the link and the constraint have a resource class in common. This field is only valid if the mplsManTunnelFastRerouteMode above is not noFastReroute." ::= { mplsManTunnelEntry 25 } mplsManTunnelBackupIncAll OBJECT-TYPE SYNTAX MplsTunnelAffinity MAX-ACCESS read-create STATUS current DESCRIPTION "Include-all resource affinity for backup tunnels set up to protect this tunnel. A link satisfies the include-all constraint if and only if the link contains all of the adminstrative groups specified in the constraint. This field is only valid if the mplsManTunnelFastRerouteMode above is not noFastReroute." ::= { mplsManTunnelEntry 26 } mplsManTunnelBackupExcAny OBJECT-TYPE SYNTAX MplsTunnelAffinity MAX-ACCESS read-create STATUS current DESCRIPTION "Exclude-any resource affinity for backup tunnels set up to protect this tunnel. A link satisfies the exclude-any constraint if and only if the constraint is zero, or the link and the constraint have a resource class in common. This field is only valid if the mplsManTunnelFastRerouteMode above is not noFastReroute." ::= { mplsManTunnelEntry 27 } mplsManTunnelBackupBandwidth OBJECT-TYPE SYNTAX MplsBitRate UNITS "1000s of bits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The estimated bandwidth required for backup tunnels, in units of 1000 bits/second. A value of zero indicates best-effort. This field is only valid if the mplsManTunnelFastRerouteMode above is not noFastReroute." ::= { mplsManTunnelEntry 28 } mplsManTunnelBackupMaxHops OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of extra hops the backup path is allowed to take, from a Point of Local Repair (PLR) to a Merge Point (MP), with PLR and MP excluded in counting. A hop-limit of 0 means only direct links between PLR and MP can be used. This field is only valid if the mplsManTunnelFastRerouteMode above is not noFastReroute." ::= { mplsManTunnelEntry 29 } mplsManTunnelMtu OBJECT-TYPE SYNTAX Integer32 (64..12288) MAX-ACCESS read-create STATUS current DESCRIPTION "Maximal transfer unit of the tunnel" ::= { mplsManTunnelEntry 30 } mplsManTunnelRebuildTimer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Defines a period in minutes (0..1440), after which the tunnel will be unconditionally rebuild. The maximal valid value is 1440 minutes (24 hours)" ::= { mplsManTunnelEntry 31 } mplsManTunnelOperStatusFlags OBJECT-TYPE SYNTAX BITS { empty(0), tunnelResignalling(1), tunnelSuppressed(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Flags to extend the information of the tunnel state For the behaviour - bits meaning: tunnelResignalling (1) - This status shows that currently the tunnel has been resignalled. The resignalling state of a tunnel should be considered together with the mplsManTunnelOperStatus attribute value of the same tunnel. tunnelSuppressed (2) - This status shows that the tunnel has been established, but a higher priority tunnel is active and in use. This tunnel can be activated, once the higher protocol tunnel fails by any reason, and in this case the tunnelSuppressed status will be cleared." ::= { mplsManTunnelEntry 32 } mplsManTunnelGuardedDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The guarded destination object specifies which IP destination address the current tunnel protects used with the fast reroute feature. The tunnel must not be fast reroute enabled." ::= { mplsManTunnelEntry 33 } mplsManTunnelMBBTimeOut OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the timer configuration (in minutes) for Make-before-break (MBB). The default value of this object is 10 minutes." ::= { mplsManTunnelEntry 34 } mplsManTunnelOwner OBJECT-TYPE SYNTAX MplsOwner MAX-ACCESS read-only STATUS current DESCRIPTION "Denotes the entity that created and is responsible for managing this tunnel. This column is automatically filled by the agent on creation of a row." ::= { mplsManTunnelEntry 35 } mplsManTunnelARHopTableIndex OBJECT-TYPE SYNTAX MplsPathIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "Index into the mplsTunnelARHopTable entry that specifies the actual hops traversed by the tunnel. This is automatically updated by the agent when the actual hops becomes available." ::= { mplsManTunnelEntry 36 } mplsManTunnelCHopTableIndex OBJECT-TYPE SYNTAX MplsPathIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "Index into the mplsTunnelCHopTable entry that specifies the computed hops traversed by the tunnel. This is automatically updated by the agent when computed hops become available or when computed hops get modified." ::= { mplsManTunnelEntry 37 } mplsTeObjectReserved3 OBJECT-TYPE SYNTAX MplsTeObjectReservedTC MAX-ACCESS read-write STATUS current DESCRIPTION "This object is reserved for future use." ::= { mplsTeObjects 3 } mplsAutoTunnelTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsAutoTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Similar to mplsManTunnelTable but for automatic tunnels." ::= { mplsTeObjects 4 } mplsAutoTunnelEntry OBJECT-TYPE SYNTAX MplsAutoTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." INDEX { prvtMplsTeMibEntityIndex, mplsAutoTunnelIndex, mplsAutoTunnelInstance } ::= { mplsAutoTunnelTable 1 } MplsAutoTunnelEntry ::= SEQUENCE { mplsAutoTunnelIndex Integer32, mplsAutoTunnelInstance MplsTunnelInstanceIndex, mplsAutoTunnelRowStatus RowStatus, mplsAutoTunnelIngressLSRId MplsExtendedTunnelIdOctetType, mplsAutoTunnelEgressLSRId MplsExtendedTunnelIdOctetType, mplsAutoTunnelName OCTET STRING, mplsAutoTunnelDescr OCTET STRING, mplsAutoTunnelIfIndex MplsTunnelInterfaceIndexOrZero, mplsAutoTunnelSetupPrio Integer32, mplsAutoTunnelHoldingPrio Integer32, mplsAutoTunnelSessionAttributes BITS, mplsAutoTunnelLocalProtectInUse TruthValue, mplsAutoTunnelHopTableIndex MplsPathIndexOrZero, mplsAutoTunnelPathInUse MplsPathIndexOrZero, mplsAutoTunnelIncludeAnyAffinity MplsTunnelAffinity, mplsAutoTunnelIncludeAllAffinity MplsTunnelAffinity, mplsAutoTunnelExcludeAnyAffinity MplsTunnelAffinity, mplsAutoTunnelOperStatus INTEGER, mplsAutoTunnelAttributes BITS, mplsAutoTunnelPathComp INTEGER, mplsAutoTunnelFastRerouteMode INTEGER, mplsAutoTunnelBackupSetupPrio Integer32, mplsAutoTunnelBackupHoldingPrio Integer32, mplsAutoTunnelBackupIncAny MplsTunnelAffinity, mplsAutoTunnelBackupIncAll MplsTunnelAffinity, mplsAutoTunnelBackupExcAny MplsTunnelAffinity, mplsAutoTunnelBackupBandwidth MplsBitRate, mplsAutoTunnelBackupMaxHops Unsigned32, mplsAutoTunnelMtu Integer32, mplsAutoTunnelRebuildTimer Unsigned32, mplsAutoTunnelOperStatusFlags BITS, mplsAutoTunnelGuardedDest IpAddress, mplsAutoTunnelMBBTimeOut Integer32, mplsAutoTunnelOwner MplsOwner, mplsAutoTunnelARHopTableIndex MplsPathIndexOrZero, mplsAutoTunnelCHopTableIndex MplsPathIndexOrZero } mplsAutoTunnelIndex OBJECT-TYPE SYNTAX Integer32 (32639..32767) MAX-ACCESS not-accessible STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsAutoTunnelEntry 1 } mplsAutoTunnelInstance OBJECT-TYPE SYNTAX MplsTunnelInstanceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsAutoTunnelEntry 2 } mplsAutoTunnelRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsAutoTunnelEntry 3 } mplsAutoTunnelIngressLSRId OBJECT-TYPE SYNTAX MplsExtendedTunnelIdOctetType MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsAutoTunnelEntry 4 } mplsAutoTunnelEgressLSRId OBJECT-TYPE SYNTAX MplsExtendedTunnelIdOctetType MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsAutoTunnelEntry 5 } mplsAutoTunnelName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsAutoTunnelEntry 6 } mplsAutoTunnelDescr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsAutoTunnelEntry 7 } mplsAutoTunnelIfIndex OBJECT-TYPE SYNTAX MplsTunnelInterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsAutoTunnelEntry 8 } mplsAutoTunnelSetupPrio OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsAutoTunnelEntry 9 } mplsAutoTunnelHoldingPrio OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsAutoTunnelEntry 10 } mplsAutoTunnelSessionAttributes OBJECT-TYPE SYNTAX BITS { fastReroute(0), mergingPermitted(1), isPersistent(2), isPinned(3), recordRoute(4), reserved5(5), bandwidthProtect(6), nodeProtect(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsAutoTunnelEntry 11 } mplsAutoTunnelLocalProtectInUse OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsAutoTunnelEntry 12 } mplsAutoTunnelHopTableIndex OBJECT-TYPE SYNTAX MplsPathIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsAutoTunnelEntry 14 } mplsAutoTunnelPathInUse OBJECT-TYPE SYNTAX MplsPathIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsAutoTunnelEntry 15 } mplsAutoTunnelIncludeAnyAffinity OBJECT-TYPE SYNTAX MplsTunnelAffinity MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsAutoTunnelEntry 16 } mplsAutoTunnelIncludeAllAffinity OBJECT-TYPE SYNTAX MplsTunnelAffinity MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsAutoTunnelEntry 17 } mplsAutoTunnelExcludeAnyAffinity OBJECT-TYPE SYNTAX MplsTunnelAffinity MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsAutoTunnelEntry 18 } mplsAutoTunnelOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3), unknown(4), dormant(5), notPresent(6), lowerLayerDown(7), resignaling(8), suppressed(9), preempted(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsAutoTunnelEntry 19 } mplsAutoTunnelAttributes OBJECT-TYPE SYNTAX BITS { reserved0(0), reserved1(1), reserved2(2), reserved3(3), reserved4(4), labelRecordingDesired(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsAutoTunnelEntry 20 } mplsAutoTunnelPathComp OBJECT-TYPE SYNTAX INTEGER { dynamicFull(1), explicit(2), dynamicPartial(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsAutoTunnelEntry 21 } mplsAutoTunnelFastRerouteMode OBJECT-TYPE SYNTAX INTEGER { noFastReroute(0), detourFastReroute(1), facilityFastReroute(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsAutoTunnelEntry 22 } mplsAutoTunnelBackupSetupPrio OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsAutoTunnelEntry 23 } mplsAutoTunnelBackupHoldingPrio OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsAutoTunnelEntry 24 } mplsAutoTunnelBackupIncAny OBJECT-TYPE SYNTAX MplsTunnelAffinity MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsAutoTunnelEntry 25 } mplsAutoTunnelBackupIncAll OBJECT-TYPE SYNTAX MplsTunnelAffinity MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsAutoTunnelEntry 26 } mplsAutoTunnelBackupExcAny OBJECT-TYPE SYNTAX MplsTunnelAffinity MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsAutoTunnelEntry 27 } mplsAutoTunnelBackupBandwidth OBJECT-TYPE SYNTAX MplsBitRate UNITS "1000s of bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsAutoTunnelEntry 28 } mplsAutoTunnelBackupMaxHops OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsAutoTunnelEntry 29 } mplsAutoTunnelMtu OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsAutoTunnelEntry 30 } mplsAutoTunnelRebuildTimer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The period, in seconds, after which the tunnel will be rebuilt." ::= { mplsAutoTunnelEntry 31 } mplsAutoTunnelOperStatusFlags OBJECT-TYPE SYNTAX BITS { empty(0), tunnelResignalling(1), tunnelSuppressed(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsAutoTunnelEntry 32 } mplsAutoTunnelGuardedDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsAutoTunnelEntry 33 } mplsAutoTunnelMBBTimeOut OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsAutoTunnelEntry 34 } mplsAutoTunnelOwner OBJECT-TYPE SYNTAX MplsOwner MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsAutoTunnelEntry 35 } mplsAutoTunnelARHopTableIndex OBJECT-TYPE SYNTAX MplsPathIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsAutoTunnelEntry 36 } mplsAutoTunnelCHopTableIndex OBJECT-TYPE SYNTAX MplsPathIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsAutoTunnelEntry 37 } mplsTeObjectReserved5 OBJECT-TYPE SYNTAX MplsTeObjectReservedTC MAX-ACCESS read-write STATUS current DESCRIPTION "This object is reserved for future use." ::= { mplsTeObjects 5 } mplsDynTunnelTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsDynTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Similar to mplsManTunnelTable but for dynamic tunnels." ::= { mplsTeObjects 6 } mplsDynTunnelEntry OBJECT-TYPE SYNTAX MplsDynTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." INDEX { prvtMplsTeMibEntityIndex, mplsDynTunnelIndex, mplsDynTunnelInstance } ::= { mplsDynTunnelTable 1 } MplsDynTunnelEntry ::= SEQUENCE { mplsDynTunnelIndex Integer32, mplsDynTunnelInstance MplsTunnelInstanceIndex, mplsDynTunnelIngressLSRId MplsExtendedTunnelIdOctetType, mplsDynTunnelEgressLSRId MplsExtendedTunnelIdOctetType, mplsDynTunnelName OCTET STRING, mplsDynTunnelDescr OCTET STRING, mplsDynTunnelIfIndex MplsTunnelInterfaceIndexOrZero, mplsDynTunnelSetupPrio Integer32, mplsDynTunnelHoldingPrio Integer32, mplsDynTunnelSessionAttributes BITS, mplsDynTunnelLocalProtectInUse TruthValue, mplsDynTunnelHopTableIndex MplsPathIndexOrZero, mplsDynTunnelPathInUse MplsPathIndexOrZero, mplsDynTunnelIncludeAnyAffinity MplsTunnelAffinity, mplsDynTunnelIncludeAllAffinity MplsTunnelAffinity, mplsDynTunnelExcludeAnyAffinity MplsTunnelAffinity, mplsDynTunnelAdminStatus INTEGER, mplsDynTunnelOperStatus INTEGER, mplsDynTunnelAttributes BITS, mplsDynTunnelPathComp INTEGER, mplsDynTunnelFastRerouteMode INTEGER, mplsDynTunnelBackupSetupPrio Integer32, mplsDynTunnelBackupHoldingPrio Integer32, mplsDynTunnelBackupIncAny MplsTunnelAffinity, mplsDynTunnelBackupIncAll MplsTunnelAffinity, mplsDynTunnelBackupExcAny MplsTunnelAffinity, mplsDynTunnelBackupBandwidth MplsBitRate, mplsDynTunnelBackupMaxHops Unsigned32, mplsDynTunnelMtu Integer32, mplsDynTunnelRebuildTimer Unsigned32, mplsDynTunnelOperStatusFlags BITS, mplsDynTunnelGuardedDest IpAddress, mplsDynTunnelMBBTimeOut Integer32, mplsDynTunnelOwner MplsOwner, mplsDynTunnelARHopTableIndex MplsPathIndexOrZero, mplsDynTunnelCHopTableIndex MplsPathIndexOrZero } mplsDynTunnelIndex OBJECT-TYPE SYNTAX Integer32 (32768..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsDynTunnelEntry 1 } mplsDynTunnelInstance OBJECT-TYPE SYNTAX MplsTunnelInstanceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsDynTunnelEntry 2 } mplsDynTunnelIngressLSRId OBJECT-TYPE SYNTAX MplsExtendedTunnelIdOctetType MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsDynTunnelEntry 3 } mplsDynTunnelEgressLSRId OBJECT-TYPE SYNTAX MplsExtendedTunnelIdOctetType MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsDynTunnelEntry 4 } mplsDynTunnelName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsDynTunnelEntry 5 } mplsDynTunnelDescr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsDynTunnelEntry 6 } mplsDynTunnelIfIndex OBJECT-TYPE SYNTAX MplsTunnelInterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsDynTunnelEntry 7 } mplsDynTunnelSetupPrio OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsDynTunnelEntry 8 } mplsDynTunnelHoldingPrio OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsDynTunnelEntry 9 } mplsDynTunnelSessionAttributes OBJECT-TYPE SYNTAX BITS { fastReroute(0), mergingPermitted(1), isPersistent(2), isPinned(3), recordRoute(4), reserved5(5), bandwidthProtect(6), nodeProtect(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsDynTunnelEntry 10 } mplsDynTunnelLocalProtectInUse OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsDynTunnelEntry 11 } mplsDynTunnelHopTableIndex OBJECT-TYPE SYNTAX MplsPathIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsDynTunnelEntry 12 } mplsDynTunnelPathInUse OBJECT-TYPE SYNTAX MplsPathIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsDynTunnelEntry 13 } mplsDynTunnelIncludeAnyAffinity OBJECT-TYPE SYNTAX MplsTunnelAffinity MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsDynTunnelEntry 14 } mplsDynTunnelIncludeAllAffinity OBJECT-TYPE SYNTAX MplsTunnelAffinity MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsDynTunnelEntry 15 } mplsDynTunnelExcludeAnyAffinity OBJECT-TYPE SYNTAX MplsTunnelAffinity MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsDynTunnelEntry 16 } mplsDynTunnelAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsDynTunnelEntry 17 } mplsDynTunnelOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3), unknown(4), dormant(5), notPresent(6), lowerLayerDown(7), resignaling(8), suppressed(9), preempted(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsDynTunnelEntry 18 } mplsDynTunnelAttributes OBJECT-TYPE SYNTAX BITS { reserved0(0), reserved1(1), reserved2(2), reserved3(3), reserved4(4), labelRecordingDesired(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsDynTunnelEntry 19 } mplsDynTunnelPathComp OBJECT-TYPE SYNTAX INTEGER { dynamicFull(1), explicit(2), dynamicPartial(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsDynTunnelEntry 20 } mplsDynTunnelFastRerouteMode OBJECT-TYPE SYNTAX INTEGER { noFastReroute(0), detourFastReroute(1), facilityFastReroute(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsDynTunnelEntry 21 } mplsDynTunnelBackupSetupPrio OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsDynTunnelEntry 22 } mplsDynTunnelBackupHoldingPrio OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsDynTunnelEntry 23 } mplsDynTunnelBackupIncAny OBJECT-TYPE SYNTAX MplsTunnelAffinity MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsDynTunnelEntry 24 } mplsDynTunnelBackupIncAll OBJECT-TYPE SYNTAX MplsTunnelAffinity MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsDynTunnelEntry 25 } mplsDynTunnelBackupExcAny OBJECT-TYPE SYNTAX MplsTunnelAffinity MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsDynTunnelEntry 26 } mplsDynTunnelBackupBandwidth OBJECT-TYPE SYNTAX MplsBitRate UNITS "1000s of bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsDynTunnelEntry 27 } mplsDynTunnelBackupMaxHops OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsDynTunnelEntry 28 } mplsDynTunnelMtu OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsDynTunnelEntry 29 } mplsDynTunnelRebuildTimer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsDynTunnelEntry 30 } mplsDynTunnelOperStatusFlags OBJECT-TYPE SYNTAX BITS { empty(0), tunnelResignalling(1), tunnelSuppressed(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsDynTunnelEntry 31 } mplsDynTunnelGuardedDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsDynTunnelEntry 32 } mplsDynTunnelMBBTimeOut OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsDynTunnelEntry 33 } mplsDynTunnelOwner OBJECT-TYPE SYNTAX MplsOwner MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsDynTunnelEntry 34 } mplsDynTunnelARHopTableIndex OBJECT-TYPE SYNTAX MplsPathIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsDynTunnelEntry 35 } mplsDynTunnelCHopTableIndex OBJECT-TYPE SYNTAX MplsPathIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsManTunnelTable." ::= { mplsDynTunnelEntry 36 } mplsTeObjectReserved7 OBJECT-TYPE SYNTAX MplsTeObjectReservedTC MAX-ACCESS read-write STATUS current DESCRIPTION "This object is reserved for future use." ::= { mplsTeObjects 7 } mplsTunnelManHopTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsTunnelManHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The mplsTunnelManHopTable is used to indicate the hops, strict or loose, for an MPLS tunnel defined in mplsManTunnelTable, when it is established via signaling, for the outgoing direction of the tunnel. Each row in this table is indexed by mplsTunnelManHopListIndex. Each row also has a secondary index mplsTunnelManHopIndex corresponding to the next hop that this row corresponds to. The first row in the table is the first hop after the origination point of the tunnel. In case we want to specify a particular interface on the originating LSR of an outgoing tunnel by which we want packets to exit the LSR, we specify this as the first hop for this tunnel in mplsTunnelManHopTable." ::= { mplsTeObjects 8 } mplsTunnelManHopEntry OBJECT-TYPE SYNTAX MplsTunnelManHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table represents a tunnel hop. An entry is created by a network administrator for signaled ERLSP set up by an MPLS signaling protocol." INDEX { prvtMplsTeMibEntityIndex, mplsTunnelManHopListIndex, mplsTunnelManHopPathOptionIndex, mplsTunnelManHopIndex } ::= { mplsTunnelManHopTable 1 } MplsTunnelManHopEntry ::= SEQUENCE { mplsTunnelManHopListIndex MplsPathIndex, mplsTunnelManHopPathOptionIndex MplsPathIndex, mplsTunnelManHopIndex MplsPathIndex, mplsTunnelManHopRowStatus RowStatus, mplsTunnelManHopEnable TruthValue, mplsTunnelManHopAddrType TeHopAddressType, mplsTunnelManHopIpAddr TeHopAddress, mplsTunnelManHopIpPrefixLen Unsigned32, mplsTunnelManHopType INTEGER, mplsTunnelManHopInclude TruthValue } mplsTunnelManHopListIndex OBJECT-TYPE SYNTAX MplsPathIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Primary index into this table identifying a particular explicit route object." ::= { mplsTunnelManHopEntry 1 } mplsTunnelManHopPathOptionIndex OBJECT-TYPE SYNTAX MplsPathIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Secondary index into this table identifying a particular group of hops representing a particular configured path. This is otherwise known as a path option." ::= { mplsTunnelManHopEntry 2 } mplsTunnelManHopIndex OBJECT-TYPE SYNTAX MplsPathIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Secondary index into this table identifying a particular hop." ::= { mplsTunnelManHopEntry 3 } mplsTunnelManHopRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified by the agent except mplsTunnelManHopRowStatus and mplsTunnelManHopStorageType." ::= { mplsTunnelManHopEntry 4 } mplsTunnelManHopEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Administratively enable or disable the hop." ::= { mplsTunnelManHopEntry 5 } mplsTunnelManHopAddrType OBJECT-TYPE SYNTAX TeHopAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The Hop Address Type of this tunnel hop. The value of this object cannot be changed if the value of the corresponding mplsTunnelManHopRowStatus object is 'active'. Note that lspid(5) is a valid option only for tunnels signaled via CRLDP." ::= { mplsTunnelManHopEntry 6 } mplsTunnelManHopIpAddr OBJECT-TYPE SYNTAX TeHopAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The Tunnel Hop Address for this tunnel hop. The type of this address is determined by the value of the corresponding mplsTunnelManHopAddrType. The value of this object cannot be changed if the value of the corresponding mplsTunnelManHopRowStatus object is 'active'." ::= { mplsTunnelManHopEntry 7 } mplsTunnelManHopIpPrefixLen OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "If mplsTunnelManHopAddrType is set to ipv4(1) or ipv6(2), then this value will contain an appropriate prefix length for the IP address in object mplsTunnelManHopIpAddr. Otherwise this value is irrelevant and should be ignored." ::= { mplsTunnelManHopEntry 8 } mplsTunnelManHopType OBJECT-TYPE SYNTAX INTEGER { strict(1), loose(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Denotes whether this tunnel hop is routed in a strict or loose fashion. The value of this object has no meaning if the mplsTunnelManHopInclude object is set to 'false'." ::= { mplsTunnelManHopEntry 9 } mplsTunnelManHopInclude OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If this value is set to true, then this indicates that this hop must be included in the tunnel's path. If this value is set to 'false', then this hop must be avoided when calculating the path for this tunnel. The default value of this object is 'true', so that by default all indicated hops are included in the CSPF path computation. If this object is set to 'false' the value of mplsTunnelManHopType should be ignored." ::= { mplsTunnelManHopEntry 10 } mplsTeObjectReserved9 OBJECT-TYPE SYNTAX MplsTeObjectReservedTC MAX-ACCESS read-write STATUS current DESCRIPTION "This object is reserved for future use." ::= { mplsTeObjects 9 } mplsTunnelAutoHopTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsTunnelAutoHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Similar to mplsTunnelManHopTable but for automatic tunnels." ::= { mplsTeObjects 10 } mplsTunnelAutoHopEntry OBJECT-TYPE SYNTAX MplsTunnelAutoHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "See similar object in mplsTunnelManHopTable." INDEX { prvtMplsTeMibEntityIndex, mplsTunnelAutoHopListIndex, mplsTunnelAutoHopPathOptionIndex, mplsTunnelAutoHopIndex } ::= { mplsTunnelAutoHopTable 1 } MplsTunnelAutoHopEntry ::= SEQUENCE { mplsTunnelAutoHopListIndex MplsPathIndex, mplsTunnelAutoHopPathOptionIndex MplsPathIndex, mplsTunnelAutoHopIndex MplsPathIndex, mplsTunnelAutoHopAddrType TeHopAddressType, mplsTunnelAutoHopIpAddr TeHopAddress, mplsTunnelAutoHopIpPrefixLen Unsigned32, mplsTunnelAutoHopType INTEGER, mplsTunnelAutoHopInclude TruthValue } mplsTunnelAutoHopListIndex OBJECT-TYPE SYNTAX MplsPathIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "See similar object in mplsTunnelManHopTable." ::= { mplsTunnelAutoHopEntry 1 } mplsTunnelAutoHopPathOptionIndex OBJECT-TYPE SYNTAX MplsPathIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "See similar object in mplsTunnelManHopTable." ::= { mplsTunnelAutoHopEntry 2 } mplsTunnelAutoHopIndex OBJECT-TYPE SYNTAX MplsPathIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "See similar object in mplsTunnelManHopTable." ::= { mplsTunnelAutoHopEntry 3 } mplsTunnelAutoHopAddrType OBJECT-TYPE SYNTAX TeHopAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsTunnelManHopTable." ::= { mplsTunnelAutoHopEntry 4 } mplsTunnelAutoHopIpAddr OBJECT-TYPE SYNTAX TeHopAddress MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsTunnelManHopTable." ::= { mplsTunnelAutoHopEntry 5 } mplsTunnelAutoHopIpPrefixLen OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsTunnelManHopTable." ::= { mplsTunnelAutoHopEntry 6 } mplsTunnelAutoHopType OBJECT-TYPE SYNTAX INTEGER { strict(1), loose(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsTunnelManHopTable." ::= { mplsTunnelAutoHopEntry 7 } mplsTunnelAutoHopInclude OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsTunnelManHopTable." ::= { mplsTunnelAutoHopEntry 8 } mplsTeObjectReserved11 OBJECT-TYPE SYNTAX MplsTeObjectReservedTC MAX-ACCESS read-write STATUS current DESCRIPTION "This object is reserved for future use." ::= { mplsTeObjects 11 } mplsTunnelManResTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsTunnelManResEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The mplsTunnelManResTable allows a manager to specify which resources are desired for an MPLS tunnel within the mplsManTunnelTable. This table also allows several tunnels to point to a single entry in this table, implying that these tunnels should share resources." ::= { mplsTeObjects 12 } mplsTunnelManResEntry OBJECT-TYPE SYNTAX MplsTunnelManResEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table represents a set of resources for an MPLS tunnel. An entry can be created by a network administrator or by an SNMP agent as instructed by any MPLS signaling protocol." INDEX { prvtMplsTeMibEntityIndex, mplsTunnelManResIndex } ::= { mplsTunnelManResTable 1 } MplsTunnelManResEntry ::= SEQUENCE { mplsTunnelManResIndex Unsigned32, mplsTunnelManResRowStatus RowStatus, mplsTunnelManResMaxRate MplsBitRate, mplsTunnelManResMeanRate MplsBitRate, mplsTunnelManResMaxBurstSize MplsBurstSize, mplsTunnelManResMeanBurstSize MplsBurstSize, mplsTunnelManResExBurstSize MplsBurstSize } mplsTunnelManResIndex OBJECT-TYPE SYNTAX Unsigned32 (1..1073610751) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Uniquely identifies this row." ::= { mplsTunnelManResEntry 1 } mplsTunnelManResRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used to create, modify, and/or delete a row in this table." ::= { mplsTunnelManResEntry 2 } mplsTunnelManResMaxRate OBJECT-TYPE SYNTAX MplsBitRate UNITS "1000s of bits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum rate in units of 1000 bits/second. Note that setting mplsTunnelManResMaxRate, mplsTunnelManResMeanRate, and mplsTunnelManResMaxBurstSize to 0 indicates best-effort treatment. This object is copied to an instance of mplsTrafficParamMaxRate in mplsTrafficParamTable the OID of which is copied into the corresponding mplsInSegmentTrafficParamPtr. If the ingress node sets a maximum rate of positive infinity, the egress node will return a value of positive infinity on the MIB GET response. This special value may not be used when setting the maximum rate with this MIB." ::= { mplsTunnelManResEntry 3 } mplsTunnelManResMeanRate OBJECT-TYPE SYNTAX MplsBitRate UNITS "1000s of bits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The mean rate in units of 1000 bits/second. This object is copied into an instance of mplsTrafficParamMeanRate in the mplsTrafficParamTable. The OID of this table entry is then copied into the corresponding mplsInSegmentTrafficParamPtr. When resource allocation is performed as requested by this TSpec object, it is copied into an entry in mplsTrafficParamTable [LSRMIB]: mplsTunnelInMeanRate to mplsTrafficParamMeanRate. The OID of this entry is copied to mplsInSegmentTrafficParamPtr of the corresponding in-segment entry." ::= { mplsTunnelManResEntry 4 } mplsTunnelManResMaxBurstSize OBJECT-TYPE SYNTAX MplsBurstSize UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum burst size in bytes. This object is copied to mplsInSegmentMaxBurstSize of the corresponding in-segment. When resource allocation is performed as requested by this TSpec object, it is copied into an entry in mplsTrafficParamTable [LSRMIB]: mplsTunnelInMaxBurstSize to mplsTrafficParamMaxBurstSize. The OID of this entry is copied to mplsInSegmentTrafficParamPtr of the corresponding in-segment entry." ::= { mplsTunnelManResEntry 5 } mplsTunnelManResMeanBurstSize OBJECT-TYPE SYNTAX MplsBurstSize UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The mean burst size in bytes. The implementations which do not implement this variable must return 0 for this value and must not allow a user to set this value." ::= { mplsTunnelManResEntry 6 } mplsTunnelManResExBurstSize OBJECT-TYPE SYNTAX MplsBurstSize UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The Excess burst size in bytes. The implementations which do not implement this variable must return noSuchObject(0) exception for this object and must not allow a user to set this value." REFERENCE "CR-LDP Specification, Section 4.3." ::= { mplsTunnelManResEntry 7 } mplsTeObjectReserved13 OBJECT-TYPE SYNTAX MplsTeObjectReservedTC MAX-ACCESS read-write STATUS current DESCRIPTION "This object is reserved for future use." ::= { mplsTeObjects 13 } mplsTunnelAutoResTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsTunnelAutoResEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Similar to mplsTunnelManResTable but for automatic tunnels." ::= { mplsTeObjects 14 } mplsTunnelAutoResEntry OBJECT-TYPE SYNTAX MplsTunnelAutoResEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "See similar object in mplsTunnelManResTable." INDEX { prvtMplsTeMibEntityIndex, mplsTunnelAutoResIndex } ::= { mplsTunnelAutoResTable 1 } MplsTunnelAutoResEntry ::= SEQUENCE { mplsTunnelAutoResIndex Unsigned32, mplsTunnelAutoResMaxRate MplsBitRate, mplsTunnelAutoResMeanRate MplsBitRate, mplsTunnelAutoResMaxBurstSize MplsBurstSize, mplsTunnelAutoResMeanBurstSize MplsBurstSize, mplsTunnelAutoResExBurstSize MplsBurstSize } mplsTunnelAutoResIndex OBJECT-TYPE SYNTAX Unsigned32 (1073610752..1073741823) MAX-ACCESS not-accessible STATUS current DESCRIPTION "See similar object in mplsTunnelManResTable." ::= { mplsTunnelAutoResEntry 1 } mplsTunnelAutoResMaxRate OBJECT-TYPE SYNTAX MplsBitRate UNITS "1000s of bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsTunnelManResTable." ::= { mplsTunnelAutoResEntry 2 } mplsTunnelAutoResMeanRate OBJECT-TYPE SYNTAX MplsBitRate UNITS "1000s of bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsTunnelManResTable." ::= { mplsTunnelAutoResEntry 3 } mplsTunnelAutoResMaxBurstSize OBJECT-TYPE SYNTAX MplsBurstSize UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsTunnelManResTable." ::= { mplsTunnelAutoResEntry 4 } mplsTunnelAutoResMeanBurstSize OBJECT-TYPE SYNTAX MplsBurstSize UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsTunnelManResTable." ::= { mplsTunnelAutoResEntry 5 } mplsTunnelAutoResExBurstSize OBJECT-TYPE SYNTAX MplsBurstSize UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsTunnelManResTable." ::= { mplsTunnelAutoResEntry 6 } mplsTeObjectReserved15 OBJECT-TYPE SYNTAX MplsTeObjectReservedTC MAX-ACCESS read-write STATUS current DESCRIPTION "This object is reserved for future use." ::= { mplsTeObjects 15 } mplsTunnelDynResTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsTunnelDynResEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Similar to mplsTunnelManResTable but for dynamic tunnels." ::= { mplsTeObjects 16 } mplsTunnelDynResEntry OBJECT-TYPE SYNTAX MplsTunnelDynResEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "See similar object in mplsTunnelManResTable." INDEX { prvtMplsTeMibEntityIndex, mplsTunnelDynResIndex } ::= { mplsTunnelDynResTable 1 } MplsTunnelDynResEntry ::= SEQUENCE { mplsTunnelDynResIndex Unsigned32, mplsTunnelDynResMaxRate MplsBitRate, mplsTunnelDynResMeanRate MplsBitRate, mplsTunnelDynResMaxBurstSize MplsBurstSize, mplsTunnelDynResMeanBurstSize MplsBurstSize, mplsTunnelDynResExBurstSize MplsBurstSize, mplsTunnelDynResStorageType MplsTunnelStorageType } mplsTunnelDynResIndex OBJECT-TYPE SYNTAX Unsigned32 (1073741824..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "See similar object in mplsTunnelManResTable." ::= { mplsTunnelDynResEntry 1 } mplsTunnelDynResMaxRate OBJECT-TYPE SYNTAX MplsBitRate UNITS "1000s of bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsTunnelManResTable." ::= { mplsTunnelDynResEntry 2 } mplsTunnelDynResMeanRate OBJECT-TYPE SYNTAX MplsBitRate UNITS "1000s of bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsTunnelManResTable." ::= { mplsTunnelDynResEntry 3 } mplsTunnelDynResMaxBurstSize OBJECT-TYPE SYNTAX MplsBurstSize UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsTunnelManResTable." ::= { mplsTunnelDynResEntry 4 } mplsTunnelDynResMeanBurstSize OBJECT-TYPE SYNTAX MplsBurstSize UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsTunnelManResTable." ::= { mplsTunnelDynResEntry 5 } mplsTunnelDynResExBurstSize OBJECT-TYPE SYNTAX MplsBurstSize UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsTunnelManResTable." ::= { mplsTunnelDynResEntry 6 } mplsTunnelDynResStorageType OBJECT-TYPE SYNTAX MplsTunnelStorageType MAX-ACCESS read-only STATUS current DESCRIPTION "See similar object in mplsTunnelManResTable." ::= { mplsTunnelDynResEntry 7 } mplsTeObjectReserved17 OBJECT-TYPE SYNTAX MplsTeObjectReservedTC MAX-ACCESS read-write STATUS current DESCRIPTION "This object is reserved for future use." ::= { mplsTeObjects 17 } mplsTunnelARHopTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsTunnelARHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The mplsTunnelARHopTable is used to indicate the hops, strict or loose, for an MPLS tunnel defined in any of the three mplsTunnelTables, as reported by the MPLS signaling protocol, for the outgoing direction of the tunnel. Each row in this table is indexed by mplsTunnelARHopListIndex. Each row also has a secondary index mplsTunnelARHopIndex, corresponding to the next hop that this row corresponds to. The first row in the table is the first hop after the origination point of the tunnel. In case we want to specify a particular interface on the originating LSR of an outgoing tunnel by which we want packets to exit the LSR, we specify this as the first hop for this tunnel in mplsTunnelARHopTable. Please note that since the information necessary to build entries within this table are not provided by some MPLS signaling protocols, implementation of this table is optional. Furthermore, since the information in this table is actually provided by the MPLS signaling protocol after the path has been set-up, the entries in this table are provided only for observation, and hence, all variables in this table are accessible exclusively as read-only." ::= { mplsTeObjects 18 } mplsTunnelARHopEntry OBJECT-TYPE SYNTAX MplsTunnelARHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table represents a tunnel hop. An entry is created by a network administrator for signaled ERLSP set up by an MPLS signaling protocol." INDEX { prvtMplsTeMibEntityIndex, mplsTunnelARHopListIndex, mplsTunnelARHopIndex } ::= { mplsTunnelARHopTable 1 } MplsTunnelARHopEntry ::= SEQUENCE { mplsTunnelARHopListIndex MplsPathIndex, mplsTunnelARHopIndex MplsPathIndex, mplsTunnelARHopAddrType TeHopAddressType, mplsTunnelARHopIpAddr TeHopAddress } mplsTunnelARHopListIndex OBJECT-TYPE SYNTAX MplsPathIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Primary index into this table identifying a particular recorded hop list." ::= { mplsTunnelARHopEntry 1 } mplsTunnelARHopIndex OBJECT-TYPE SYNTAX MplsPathIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Secondary index into this table identifying the particular hop." ::= { mplsTunnelARHopEntry 2 } mplsTunnelARHopAddrType OBJECT-TYPE SYNTAX TeHopAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The Hop Address Type of this tunnel hop. If the type value is set to ipv4(1) or ipv6(2). The tunnel path can be determin using mplsTunnelARHopIpAddr object. mplsTunnelARHopAddrUnnum and mplsTunnelARHopLspId should not be used. If the type value is set to unnum(4) or unnumv6(6). The tunnel path can be determin using mplsTunnelARHopAddrUnnum object. mplsTunnelARHopIpAddr and mplsTunnelARHopLspId should not be used. Note that lspid(5) is a valid option only for tunnels signaled via CRLDP. The tunnel path can be determin using mplsTunnelARHopLspId object. mplsTunnelARHopIpAddr and mplsTunnelARHopAddrUnnum should not be used. Currently only ipv4(1) type is supported" ::= { mplsTunnelARHopEntry 3 } mplsTunnelARHopIpAddr OBJECT-TYPE SYNTAX TeHopAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Tunnel Hop Address for this tunnel hop. The type of this address is determined by the value of the corresponding mplsTunnelARHopAddrType. If mplsTunnelARHopAddrType is set to ipv4(1) or ipv6(2), then this value contains the LSR Router ID of the unnumbered interface. Otherwise the agent SHOULD set this object to the zero-length string and the manager should ignore this object." ::= { mplsTunnelARHopEntry 4 } mplsTeObjectReserved19 OBJECT-TYPE SYNTAX MplsTeObjectReservedTC MAX-ACCESS read-write STATUS current DESCRIPTION "This object is reserved for future use." ::= { mplsTeObjects 19 } mplsTunnelCHopTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsTunnelCHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The mplsTunnelCHopTable is used to indicate the hops, strict or loose, for an MPLS tunnel defined in any of three mplsManTunnelTables, as computed by a constraint-based routing protocol, based on the mplsTunnelManHopTable for the outgoing direction of the tunnel. Each row in this table is indexed by mplsTunnelCHopListIndex. Each row also has a secondary index mplsTunnelCHopIndex, corresponding to the next hop that this row corresponds to. The first row in the table is the first hop after the origination point of the tunnel. In case we want to specify a particular interface on the originating LSR of an outgoing tunnel by which we want packets to exit the LSR, we specify this as the first hop for this tunnel in mplsTunnelCHopTable. Please note that since the information necessary to build entries within this table may not be supported by some LSRs, implementation of this table is optional. Furthermore, since the information in this table is actually provided by routing protocol after the path has been computed, the entries in this table are provided only for observation, and hence, all variables in this table are accessible exclusively as read-only." ::= { mplsTeObjects 20 } mplsTunnelCHopEntry OBJECT-TYPE SYNTAX MplsTunnelCHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table represents a tunnel hop. An entry in this table is created by a constraint- based routing protocol based on the hops specified in the corresponding mplsTunnelManHopTable." INDEX { prvtMplsTeMibEntityIndex, mplsTunnelCHopListIndex, mplsTunnelCHopIndex } ::= { mplsTunnelCHopTable 1 } MplsTunnelCHopEntry ::= SEQUENCE { mplsTunnelCHopListIndex MplsPathIndex, mplsTunnelCHopIndex MplsPathIndex, mplsTunnelCHopAddrType TeHopAddressType, mplsTunnelCHopIpAddr TeHopAddress, mplsTunnelCHopIpPrefixLen Unsigned32, mplsTunnelCHopType INTEGER } mplsTunnelCHopListIndex OBJECT-TYPE SYNTAX MplsPathIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Primary index into this table identifying a particular computed hop list." ::= { mplsTunnelCHopEntry 1 } mplsTunnelCHopIndex OBJECT-TYPE SYNTAX MplsPathIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Secondary index into this table identifying the particular hop." ::= { mplsTunnelCHopEntry 2 } mplsTunnelCHopAddrType OBJECT-TYPE SYNTAX TeHopAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The Hop Address Type of this tunnel hop. Note that lspid(5) is a valid option only for tunnels signaled via CRLDP." ::= { mplsTunnelCHopEntry 3 } mplsTunnelCHopIpAddr OBJECT-TYPE SYNTAX TeHopAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Tunnel Hop Address for this tunnel hop. The type of this address is determined by the value of the corresponding mplsTunnelCHopAddrType. If mplsTunnelCHopAddrType is set to unnum(4) or unnumv6(6), then this value will contain the LSR Router ID of the unnumbered interface. Otherwise the agent should set this object to the zero-length string and the manager SHOULD ignore this object." ::= { mplsTunnelCHopEntry 4 } mplsTunnelCHopIpPrefixLen OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "If mplsTunnelCHopAddrType is set to ipv4(1) or ipv6(2), then this value will contain an appropriate prefix length for the IP address in object mplsTunnelCHopIpAddr. Otherwise this value is irrelevant and should be ignored." ::= { mplsTunnelCHopEntry 5 } mplsTunnelCHopType OBJECT-TYPE SYNTAX INTEGER { strict(1), loose(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Denotes whether this is tunnel hop is routed in a strict or loose fashion." ::= { mplsTunnelCHopEntry 6 } mplsTeObjectReserved21 OBJECT-TYPE SYNTAX MplsTeObjectReservedTC MAX-ACCESS read-write STATUS current DESCRIPTION "This object is reserved for future use." ::= { mplsTeObjects 21 } prvtMplsTunnelTrapEnableTable OBJECT-TYPE SYNTAX SEQUENCE OF PrvtMplsTunnelTrapEnableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The prvtMplsTunnelTrapEnable Table allows a manager to enable or disable TRAPs." ::= { mplsTeObjects 22 } prvtMplsTunnelTrapEnableEntry OBJECT-TYPE SYNTAX PrvtMplsTunnelTrapEnableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table is used to configure trap support for this instance of TE-MIB" INDEX { prvtMplsTeMibEntityIndex } ::= { prvtMplsTunnelTrapEnableTable 1 } PrvtMplsTunnelTrapEnableEntry ::= SEQUENCE { prvtMplsTunnelTrapEnableValue TruthValue } prvtMplsTunnelTrapEnableValue OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If this object is true, then it enables the generation of mplsTunnelUp and mplsTunnelDown traps, otherwise these traps are not emitted." ::= { prvtMplsTunnelTrapEnableEntry 1 } mplsManTunnelUp NOTIFICATION-TYPE OBJECTS { mplsManTunnelAdminStatus, mplsManTunnelOperStatus, mplsManTunnelName } STATUS current DESCRIPTION "This notification is generated when a mplsManTunnelOperStatus object for one of the configured tunnels is about to leave the down state and transition into some other state (but not into the notPresent state). This other state is indicated by the included value of mplsManTunnelOperStatus. This structure is the same as the generic AMB_MPLS_TUNNEL_TRAP_COMMON." ::= { mplsTeNotifications 1 } mplsManTunnelDown NOTIFICATION-TYPE OBJECTS { mplsManTunnelAdminStatus, mplsManTunnelOperStatus, mplsManTunnelName } STATUS current DESCRIPTION "This notification is generated when a mplsManTunnelOperStatus object for one of the configured tunnels is about to enter the down state from some other state (but not from the notPresent state). This other state is indicated by the included value of mplsManTunnelOperStatus. This structure is the same as the generic AMB_MPLS_TUNNEL_TRAP_COMMON." ::= { mplsTeNotifications 2 } mplsAutoTunnelUp NOTIFICATION-TYPE OBJECTS { mplsAutoTunnelOperStatus, mplsAutoTunnelName } STATUS current DESCRIPTION "This notification is generated when a mplsAutoTunnelOperStatus object for one of the configured tunnels is about to leave the down state and transition into some other state (but not into the notPresent state). This other state is indicated by the included value of mplsAutoTunnelOperStatus. This structure is the same as the generic AMB_MPLS_TUNNEL_TRAP_COMMON." ::= { mplsTeNotifications 3 } mplsAutoTunnelDown NOTIFICATION-TYPE OBJECTS { mplsAutoTunnelOperStatus, mplsAutoTunnelName } STATUS current DESCRIPTION "This notification is generated when a mplsAutoTunnelOperStatus object for one of the configured tunnels is about to enter the down state from some other state (but not from the notPresent state). This other state is indicated by the included value of mplsAutoTunnelOperStatus. This structure is the same as the generic AMB_MPLS_TUNNEL_TRAP_COMMON." ::= { mplsTeNotifications 4 } mplsDynTunnelUp NOTIFICATION-TYPE OBJECTS { mplsDynTunnelAdminStatus, mplsDynTunnelOperStatus, mplsDynTunnelName } STATUS current DESCRIPTION "This notification is generated when a mplsDynTunnelOperStatus object for one of the configured tunnels is about to leave the down state and transition into some other state (but not into the notPresent state). This other state is indicated by the included value of mplsDynTunnelOperStatus. This structure is the same as the generic AMB_MPLS_TUNNEL_TRAP_COMMON." ::= { mplsTeNotifications 5 } mplsDynTunnelDown NOTIFICATION-TYPE OBJECTS { mplsDynTunnelAdminStatus, mplsDynTunnelOperStatus, mplsDynTunnelName } STATUS current DESCRIPTION "This notification is generated when a mplsDynTunnelOperStatus object for one of the configured tunnels is about to enter the down state from some other state (but not from the notPresent state). This other state is indicated by the included value of mplsDynTunnelOperStatus. This structure is the same as the generic AMB_MPLS_TUNNEL_TRAP_COMMON." ::= { mplsTeNotifications 6 } mplsManTunnelReoptimized NOTIFICATION-TYPE OBJECTS { mplsManTunnelAdminStatus, mplsManTunnelOperStatus, mplsManTunnelARHopTableIndex, mplsManTunnelName } STATUS current DESCRIPTION "This notification is generated when a tunnel is reoptimized. If the mplsTunnelARHopTable is used, then this tunnel instance's entry in the mplsTunnelARHopTable MAY contain the new path for this tunnel some time after this trap is issued by the agent. This structure is the same as the generic AMB_MPLS_TUNNEL_TRAP_COMMON." ::= { mplsTeNotifications 7 } END -- end of module PRVT-MPLS-TE-MIB.