-- ********************************************************************* -- ** -- ** BATM Advanced Communications. -- ** -- ********************************************************************* -- ** Filename: PRVT-PORTS-AGGREGATION-MIB.mib -- ** Project: T-Metro Switches. -- ** Purpose: Private MIB -- ********************************************************************* -- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved. -- WARNING: -- -- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING: -- -- This file is the property of BATM Advanced Communications and contains -- proprietary and confidential information. This file is made -- available to authorized BATM customers on the express -- condition that neither it, nor any of the information contained -- therein, shall be disclosed to third parties or be used for any -- purpose other than to replace, modify or upgrade firmware and/or -- software components of BATM manufactured equipment within the -- authorized customer's network, and that such transfer be -- completed in accordance with the instructions provided by -- BATM. Any other use is strictly prohibited. -- -- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED -- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE -- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED -- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES -- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -- -- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER -- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS -- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR -- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY -- TO USE, THE SOFTWARE CONTAINED IN THIS FILE. -- -- ---------------------------------------------------------------------------- PRVT-PORTS-AGGREGATION-MIB DEFINITIONS ::= BEGIN IMPORTS InterfaceIndex FROM IF-MIB switch FROM PRVT-SWITCH-MIB Counter64, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue FROM SNMPv2-TC; prvtPortsAggregationMIB MODULE-IDENTITY LAST-UPDATED "201402050000Z" ORGANIZATION "BATM Advanced Communication" CONTACT-INFO "BATM/Telco Systems Support team Email: For North America: techsupport@telco.com For North Europe: support@batm.de, info@batm.de For the rest of the world: techsupport@telco.com" DESCRIPTION "The Ports Aggregation MIB module for managing switch or ipSwitch static and dynamic port aggregation." REVISION "201001070000Z" DESCRIPTION "Initial" ::= { switch 106 } PrvtPortsAggregationMacSecType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The state of a port with regards to MAC count." SYNTAX INTEGER { noViolation(1), watermarkReached(2), maxMacCountReached(3), errorState(4) } prvtPortsAggregationNotifications OBJECT IDENTIFIER ::= { prvtPortsAggregationMIB 0 } prvtPortsAggregationObjects OBJECT IDENTIFIER ::= { prvtPortsAggregationMIB 1 } prvtPortsAggregationDistributionType OBJECT-TYPE SYNTAX INTEGER { l2(1), l3(2), l4(3), mpls(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The LACP distribution type. l2 - MAC address based distribution l3 - IP address based distribution l4 - TCP/UDP IP address based distribution mpls -MPLS label based distribution" ::= { prvtPortsAggregationObjects 1 } portsAggregationTable OBJECT-TYPE SYNTAX SEQUENCE OF PortsAggregationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the status of all the trunks in the system. It can contain two major types: static and dynamic trunks." ::= { prvtPortsAggregationObjects 2 } portsAggregationEntry OBJECT-TYPE SYNTAX PortsAggregationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ports aggregation entry." INDEX { portsAggregationName } ::= { portsAggregationTable 1 } PortsAggregationEntry ::= SEQUENCE { portsAggregationName OCTET STRING, portsAggregationRowStatus RowStatus, portsAggregationDescription OCTET STRING, portsAggregationMode INTEGER, portsAggregationLacpEnable TruthValue, portsAggregationLacpMode INTEGER, portsAggregationLacpAdminKey Unsigned32, portsAggregationLacpId MacAddress, portsAggregationLacpMarker TruthValue, portsAggregationLacpSystemPriority Unsigned32, portsAggregationOperStatus INTEGER, portsAggregationPortCount Unsigned32, portsAggregationUplinkCount Unsigned32, portsAggregationIfInOctets Counter64, portsAggregationIfInUcastPkts Counter64, portsAggregationIfInNUcastPkts Counter64, portsAggregationIfInErrors Counter64, portsAggregationIfInUnknownProtos Counter64, portsAggregationIfOutOctets Counter64, portsAggregationIfOutUcastPkts Counter64, portsAggregationIfOutNUcastPkts Counter64, portsAggregationIfOutErrors Counter64, portsAggregationIfInMulticastPkts Counter64, portsAggregationIfInBroadcastPkts Counter64, portsAggregationIfInDiscardsPkts Counter64, portsAggregationIfOutMulticastPkts Counter64, portsAggregationIfOutBroadcastPkts Counter64, portsAggregationLacpFastRate TruthValue, portsAggregationLacpSelectionCriteria INTEGER, portsAggregationLacpTxOnStandby TruthValue, portsAggregationLacpForceActive Unsigned32, portsAggregationFailoverTime OCTET STRING, portsAggregationMacSecIfProfile OCTET STRING, portsAggregationMacSecIfCurrMacCount Unsigned32, portsAggregationMacSecIfState PrvtPortsAggregationMacSecType, portsAggregationEvPropProfile OCTET STRING } portsAggregationName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..5)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Aggregation Name: pattern ag(([1-9])|([1-9][0-9])|(1[0-9][0-9])|(2[0-5][0-6]))" ::= { portsAggregationEntry 1 } portsAggregationRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Aggregation row status." ::= { portsAggregationEntry 2 } portsAggregationDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "Aggregation description." ::= { portsAggregationEntry 3 } portsAggregationMode OBJECT-TYPE SYNTAX INTEGER { access(1), network(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Aggregation mode." ::= { portsAggregationEntry 4 } portsAggregationLacpEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Link Aggregation Control Protocol (LACP) Configuration" ::= { portsAggregationEntry 5 } portsAggregationLacpMode OBJECT-TYPE SYNTAX INTEGER { passive(1), active(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Aggregation lacp mode." ::= { portsAggregationEntry 6 } portsAggregationLacpAdminKey OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Aggregation administrative key." ::= { portsAggregationEntry 7 } portsAggregationLacpId OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Specify LACP ID (MAC address format)." ::= { portsAggregationEntry 8 } portsAggregationLacpMarker OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Aggregation lacp marker." ::= { portsAggregationEntry 9 } portsAggregationLacpSystemPriority OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Aggregation lacp priority." ::= { portsAggregationEntry 10 } portsAggregationOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Aggregation operational status." ::= { portsAggregationEntry 11 } portsAggregationPortCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Aggregation ports count." ::= { portsAggregationEntry 12 } portsAggregationUplinkCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Aggregation uplink ports count." ::= { portsAggregationEntry 13 } portsAggregationIfInOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received on the interface, including framing characters." ::= { portsAggregationEntry 14 } portsAggregationIfInUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer." ::= { portsAggregationEntry 15 } portsAggregationIfInNUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast or broadcast address at this sub-layer." ::= { portsAggregationEntry 16 } portsAggregationIfInErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character- oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol." ::= { portsAggregationEntry 17 } portsAggregationIfInUnknownProtos OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "For packet-oriented interfaces, the number of packets received via the interface which were discarded because of an unknown or unsupported protocol. For character-oriented or fixed-length interfaces that support protocol multiplexing the number of transmission units received via the interface which were discarded because of an unknown or unsupported protocol. For any interface that does not support protocol multiplexing, this counter will always be 0." ::= { portsAggregationEntry 18 } portsAggregationIfOutOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets transmitted out of the interface, including framing characters." ::= { portsAggregationEntry 19 } portsAggregationIfOutUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent." ::= { portsAggregationEntry 20 } portsAggregationIfOutNUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent." ::= { portsAggregationEntry 21 } portsAggregationIfOutErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not be transmitted because of errors." ::= { portsAggregationEntry 22 } portsAggregationIfInMulticastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses." ::= { portsAggregationEntry 23 } portsAggregationIfInBroadcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer." ::= { portsAggregationEntry 24 } portsAggregationIfInDiscardsPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space." ::= { portsAggregationEntry 25 } portsAggregationIfOutMulticastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { portsAggregationEntry 26 } portsAggregationIfOutBroadcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent." ::= { portsAggregationEntry 27 } portsAggregationLacpFastRate OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Specify LACP transmission interval." ::= { portsAggregationEntry 28 } portsAggregationLacpSelectionCriteria OBJECT-TYPE SYNTAX INTEGER { highest-count(1), highest-weight(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specify LACP active Sub-LAG selection criteria." ::= { portsAggregationEntry 29 } portsAggregationLacpTxOnStandby OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Enable transmission of LACP PDUs on links selected as standby." ::= { portsAggregationEntry 30 } portsAggregationLacpForceActive OBJECT-TYPE SYNTAX Unsigned32 (1..2) MAX-ACCESS read-create STATUS current DESCRIPTION "Force the active Sub-LAG." ::= { portsAggregationEntry 31 } portsAggregationFailoverTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Time since last Sub-LAG failover." ::= { portsAggregationEntry 32 } portsAggregationMacSecIfProfile OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..30)) MAX-ACCESS read-create STATUS current DESCRIPTION "The name of a learning profile from prvtMacSecLrnProfTable." ::= { portsAggregationEntry 33 } portsAggregationMacSecIfCurrMacCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current MAC count for this entry." ::= { portsAggregationEntry 34 } portsAggregationMacSecIfState OBJECT-TYPE SYNTAX PrvtPortsAggregationMacSecType MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of this entry." ::= { portsAggregationEntry 35 } portsAggregationEvPropProfile OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "Event propagation profile name, aplied to this aggregation." ::= { portsAggregationEntry 36 } portsAggregationPortsTable OBJECT-TYPE SYNTAX SEQUENCE OF PortsAggregationPortsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains ports in trunk." ::= { prvtPortsAggregationObjects 3 } portsAggregationPortsEntry OBJECT-TYPE SYNTAX PortsAggregationPortsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ports aggregation entry." INDEX { portsAggregationName, portsAggregationPortsIfIndex } ::= { portsAggregationPortsTable 1 } PortsAggregationPortsEntry ::= SEQUENCE { portsAggregationPortsIfIndex InterfaceIndex, portsAggregationPortsRowStatus RowStatus, portsAggregationPortsPriority Unsigned32, portsAggregationPortsSubLag Unsigned32 } portsAggregationPortsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Aggregation port index." ::= { portsAggregationPortsEntry 1 } portsAggregationPortsRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Aggregation ports row status." ::= { portsAggregationPortsEntry 2 } portsAggregationPortsPriority OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Aggregation port priority." ::= { portsAggregationPortsEntry 3 } portsAggregationPortsSubLag OBJECT-TYPE SYNTAX Unsigned32 (1..2) MAX-ACCESS read-create STATUS current DESCRIPTION "Aggregation port Sub-LAG." ::= { portsAggregationPortsEntry 4 } lagMemberLinkUp NOTIFICATION-TYPE OBJECTS { portsAggregationUplinkCount } STATUS current DESCRIPTION "This notification is generated when a port in lag link becomes up." ::= { prvtPortsAggregationNotifications 1 } lagMemberLinkDown NOTIFICATION-TYPE OBJECTS { portsAggregationUplinkCount } STATUS current DESCRIPTION "This notification is generated when a port in lag link becomes down." ::= { prvtPortsAggregationNotifications 2 } lagMemberAdd NOTIFICATION-TYPE OBJECTS { portsAggregationPortCount } STATUS current DESCRIPTION "This notification is generated when a new port is added to a lag link." ::= { prvtPortsAggregationNotifications 3 } lagMemberRemove NOTIFICATION-TYPE OBJECTS { portsAggregationPortCount } STATUS current DESCRIPTION "This notification is generated when a port is removed from a lag." ::= { prvtPortsAggregationNotifications 4 } lagLinkUp NOTIFICATION-TYPE OBJECTS { portsAggregationOperStatus } STATUS current DESCRIPTION "This notification is generated when lag link becomes up." ::= { prvtPortsAggregationNotifications 5 } lagLinkDown NOTIFICATION-TYPE OBJECTS { portsAggregationOperStatus } STATUS current DESCRIPTION "This notification is generated when lag link becomes down." ::= { prvtPortsAggregationNotifications 6 } portsAggregationWmarkViolation NOTIFICATION-TYPE OBJECTS { portsAggregationName } STATUS current DESCRIPTION "" ::= { prvtPortsAggregationNotifications 7 } portsAggregationViolation NOTIFICATION-TYPE OBJECTS { portsAggregationName } STATUS current DESCRIPTION "" ::= { prvtPortsAggregationNotifications 8 } END -- end of module PRVT-PORTS-AGGREGATION-MIB.