-- *********************************************************************
-- **
-- ** BATM Advanced Communications.
-- **
-- *********************************************************************
-- ** Filename: PRVT-RAPS-MIB.mib
-- ** Project: T-Metro Switches.
-- ** Purpose: Private MIB
-- *********************************************************************
-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
-- WARNING:
--
-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
--
-- This file is the property of BATM Advanced Communications and contains
-- proprietary and confidential information. This file is made
-- available to authorized BATM customers on the express
-- condition that neither it, nor any of the information contained
-- therein, shall be disclosed to third parties or be used for any
-- purpose other than to replace, modify or upgrade firmware and/or
-- software components of BATM manufactured equipment within the
-- authorized customer's network, and that such transfer be
-- completed in accordance with the instructions provided by
-- BATM. Any other use is strictly prohibited.
--
-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
--
-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
--
-- ----------------------------------------------------------------------------

PRVT-RAPS-MIB DEFINITIONS ::= BEGIN

IMPORTS
    InterfaceIndex, ifIndex
        FROM IF-MIB
    serviceAccessSwitch
        FROM PRVT-SWITCH-MIB
    Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, 
    Unsigned32
        FROM SNMPv2-SMI
    DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue
        FROM SNMPv2-TC;

prvtRapsMIB MODULE-IDENTITY
    LAST-UPDATED "201011110000Z"
    ORGANIZATION 
        "BATM Advanced Communication"
    CONTACT-INFO 
        "BATM/Telco Systems Support team
         Email:
         For North America: techsupport@telco.com
         For North Europe: support@batm.de, info@batm.de
         For the rest of the world: techsupport@telco.com"
    DESCRIPTION 
        "The SNMP MIB module for Ring Automatic Protection Switching (G.8032)."
    REVISION    "201011110000Z"
    DESCRIPTION 
        "Added description for rings and subrings."
    REVISION    "201003080000Z"
    DESCRIPTION 
        "Initial version."
    ::= { serviceAccessSwitch 4 }


PrvtRapsInstIndexType ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS      current
    DESCRIPTION 
        "A Ring APS instance index."
    SYNTAX      Unsigned32 (1..10)

PrvtRapsRingIdType ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS      current
    DESCRIPTION 
        "Ring identifier."
    SYNTAX      Integer32 (1..255)

PrvtRapsVlanIdType ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS      current
    DESCRIPTION 
        "VLAN identifier"
    SYNTAX      Integer32 (1..4094)

PrvtRapsLinkOperStatusType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION 
        "Operational status of a link."
    SYNTAX      INTEGER { up(0), blocked(1), failed(2), na(3) }

PrvtRapsMepIdType ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS      current
    DESCRIPTION 
        "A maintenance entity group end point identifier."
    SYNTAX      Integer32 (1..8191)

PrvtRapsLinkAggIdType ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS      current
    DESCRIPTION 
        "A link aggregation identifier."
    SYNTAX      Integer32 (1..14)

PrvtRapsHoldOffType ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS      current
    DESCRIPTION 
        "Hold-off timer value in milliseconds.
         Valid values are increments of 100 milliseconds."
    SYNTAX      Integer32 (0..10000)

PrvtRapsWaitTimerType ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS      current
    DESCRIPTION 
        "Wait to Restore timer value in minutes."
    SYNTAX      Integer32 (1..12)

PrvtRapsCfmLevelType ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS      current
    DESCRIPTION 
        "Connectivity Fault Management level."
    SYNTAX      Integer32 (0..7)

PrvtRapsGuardTimerType ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS      current
    DESCRIPTION 
        "Guard timer value in milliseconds.
         Valid values are increments of 10 milliseconds."
    SYNTAX      Integer32 (10..2000)

PrvtRapsBlockTimerType ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS      current
    DESCRIPTION 
        "Wait to Block timer value in milliseconds.
         This time is actually the Guard Timer + 5 seconds."
    SYNTAX      Integer32 (5010..7000)

PrvtRapsModeType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION 
        "The G.8032 mode."
    SYNTAX      INTEGER { version1(1), version2(2) }

PrvtRapsRoleType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION 
        "The role of a node inside a ring."
    SYNTAX      INTEGER { simpleNode(0), rplNeighbor(1), rplOwner(2) }

PrvtRapsInstStatusType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION 
        "R-APS instance operational status."
    SYNTAX      INTEGER { up(1), down(2) }

PrvtRapsStatesType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION 
        "R-APS instance states."
    SYNTAX      INTEGER { init(0), idle(1), protection(2), 
                    manualSwitch(3), forcedSwitch(4), pending(5) }

PrvtRapsReceivedCommandType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION 
        "Request/State field of received R-APS message."
    SYNTAX      INTEGER { noRequest(0), manualSwitch(7), signalFail(11), 
                    forcedSwitch(13), event(14), na(16) }

PrvtRapsReceivedInfoType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION 
        "Bits field of received R-APS message."
    SYNTAX      BITS { bpr(0), dnf(1), rp(2) }

PrvtRapsTopPriCmdType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION 
        "Top Priority Request and Status Values."
    SYNTAX      INTEGER { clear(0), forcedSwitch(1), 
                    remoteForcedSwitch(2), signalFail(3), 
                    signalFailRecover(4), remoteSignalFail(5), 
                    remoteManualSwitch(6), manualSwitch(7), wtrExpire(8), 
                    wtrRunning(9), wtbExpire(10), wtbRunning(11), 
                    noRequestRplBlocked(12), noRequest(13), na(14) }

PrvtRapsActionType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION 
        "Used to perform an action.
         Setting to 'performAction' will cause the action to be performed.
         Setting to 'idle' (or any other value except 'performAction') has
         no effect (no action is performed).
         Reads will always return 'idle'."
    SYNTAX      INTEGER { idle(1), performAction(2) }

PrvtRapsIfIndexOrAgIdType ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS      current
    DESCRIPTION 
        "The ifIndex of a physical port or the ID of a LAG interface.
         LAG interfaces have values 1..14.
         Physical ports (ifIndex) have values > 1000."
    SYNTAX      Integer32 (1..2147483647)

PrvtRapsMonitoringMethodType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION 
        "Ethernet ring protection monitoring methods"
    SYNTAX      INTEGER { ccm(1), link-status(2) }

prvtRapsMIBNotifications OBJECT IDENTIFIER
    ::= { prvtRapsMIB 0 }

prvtRapsMIBObjects OBJECT IDENTIFIER
    ::= { prvtRapsMIB 1 }

prvtRapsInstTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PrvtRapsInstEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "R-APS Instance table.
         Each entry in this table defines an instance of a Ring APS."
    ::= { prvtRapsMIBObjects 1 }

prvtRapsInstEntry OBJECT-TYPE
    SYNTAX      PrvtRapsInstEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "An entry in prvtRapsInstTable."
    INDEX       { prvtRapsInstIndex }
    ::= { prvtRapsInstTable 1 }

PrvtRapsInstEntry ::= SEQUENCE {
    prvtRapsInstIndex               PrvtRapsInstIndexType,
    prvtRapsInstRowStatus           RowStatus,
    prvtRapsInstMode                PrvtRapsModeType,
    prvtRapsInstRingId              PrvtRapsRingIdType,
    prvtRapsInstRole                PrvtRapsRoleType,
    prvtRapsInstControlVlan         PrvtRapsVlanIdType,
    prvtRapsInstCfmDomainLevel      PrvtRapsCfmLevelType,
    prvtRapsInstRevertiveMode       TruthValue,
    prvtRapsInstDisableVirtChan     TruthValue,
    prvtRapsInstHoldOffTimer        PrvtRapsHoldOffType,
    prvtRapsInstWaitToRestoreTimer  PrvtRapsWaitTimerType,
    prvtRapsInstGuardTimer          PrvtRapsGuardTimerType,
    prvtRapsInstWaitToBlockTimer    PrvtRapsBlockTimerType,
    prvtRapsInstShutdown            TruthValue,
    prvtRapsInstClear               PrvtRapsActionType,
    prvtRapsInstOperStatus          PrvtRapsInstStatusType,
    prvtRapsInstRapsState           PrvtRapsStatesType,
    prvtRapsInstTopPriCmd           PrvtRapsTopPriCmdType,
    prvtRapsInstDescription         DisplayString,
    prvtRapsInstControlProtocol     INTEGER
}

prvtRapsInstIndex OBJECT-TYPE
    SYNTAX      PrvtRapsInstIndexType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "An arbitrary index uniquely identifying a Ring APS instance."
    ::= { prvtRapsInstEntry 1 }

prvtRapsInstRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The RowStatus for this R-APS instance."
    ::= { prvtRapsInstEntry 2 }

prvtRapsInstMode OBJECT-TYPE
    SYNTAX      PrvtRapsModeType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The G.8032 mode for this R-APS instance.
         Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps').
         In version 1 mode (prvtRapsInstMode equals 'version1'),
         ring ID (prvtRapsInstRingId) must be 1."
    ::= { prvtRapsInstEntry 3 }

prvtRapsInstRingId OBJECT-TYPE
    SYNTAX      PrvtRapsRingIdType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The Ring ID for this R-APS instance.
         Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps').
         In version 1 mode (prvtRapsInstMode equals 'version1'),
         ring ID (prvtRapsInstRingId) must be 1."
    ::= { prvtRapsInstEntry 4 }

prvtRapsInstRole OBJECT-TYPE
    SYNTAX      PrvtRapsRoleType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The role of the node for this R-APS instance.
         Must perform shutdown to change this object."
    ::= { prvtRapsInstEntry 5 }

prvtRapsInstControlVlan OBJECT-TYPE
    SYNTAX      PrvtRapsVlanIdType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The control VLAN for this R-APS instance.
         When main ring's control protocol is vpls (prvtRapsInstControlProtocol equals 'vpls'), this
         should be set equal to the ring's instance ID (prvtRapsInstIndex).
         This object must be set to the ID of an existing VLAN.
         Each R-APS instance must use a unique VLAN for the control VLAN.
         Must perform shutdown to change this object."
    ::= { prvtRapsInstEntry 6 }

prvtRapsInstCfmDomainLevel OBJECT-TYPE
    SYNTAX      PrvtRapsCfmLevelType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The CFM domain level for this R-APS instance.
         Must perform shutdown to change this object."
    ::= { prvtRapsInstEntry 7 }

prvtRapsInstRevertiveMode OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Set to 'true' to select revertive behavior for this R-APS instance.
         Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps').
         Non-revertive behavior is not available in version 1 mode."
    ::= { prvtRapsInstEntry 8 }

prvtRapsInstDisableVirtChan OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Set to 'true' to select that the node is part of a sub-ring without
         a RAPS virtual channel.
         Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps').
         Must be set 'false' when in version 1 mode."
    ::= { prvtRapsInstEntry 9 }

prvtRapsInstHoldOffTimer OBJECT-TYPE
    SYNTAX      PrvtRapsHoldOffType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The hold-off timer time-out value for this R-APS instance.
         Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps')."
    ::= { prvtRapsInstEntry 10 }

prvtRapsInstWaitToRestoreTimer OBJECT-TYPE
    SYNTAX      PrvtRapsWaitTimerType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The wait-to-restore timer time-out value for this R-APS instance.
         Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps')."
    ::= { prvtRapsInstEntry 11 }

prvtRapsInstGuardTimer OBJECT-TYPE
    SYNTAX      PrvtRapsGuardTimerType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The guard timer time-out value for this R-APS instance.
         Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps')."
    ::= { prvtRapsInstEntry 12 }

prvtRapsInstWaitToBlockTimer OBJECT-TYPE
    SYNTAX      PrvtRapsBlockTimerType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The wait to block timer time-out value for this sub-ring."
    ::= { prvtRapsInstEntry 13 }

prvtRapsInstShutdown OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Set to 'true' to de-activate this R-APS instance."
    ::= { prvtRapsInstEntry 14 }

prvtRapsInstClear OBJECT-TYPE
    SYNTAX      PrvtRapsActionType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Sends the Clear command to this R-APS instance."
    ::= { prvtRapsInstEntry 15 }

prvtRapsInstOperStatus OBJECT-TYPE
    SYNTAX      PrvtRapsInstStatusType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The operational status of this R-APS instance."
    ::= { prvtRapsInstEntry 16 }

prvtRapsInstRapsState OBJECT-TYPE
    SYNTAX      PrvtRapsStatesType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The current state for this R-APS instance."
    ::= { prvtRapsInstEntry 17 }

prvtRapsInstTopPriCmd OBJECT-TYPE
    SYNTAX      PrvtRapsTopPriCmdType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The received Top Priority Request and Status value for this R-APS instance."
    ::= { prvtRapsInstEntry 18 }

prvtRapsInstDescription OBJECT-TYPE
    SYNTAX      DisplayString (SIZE(0..255))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "RAPS instance description."
    ::= { prvtRapsInstEntry 19 }

prvtRapsInstControlProtocol OBJECT-TYPE
    SYNTAX      INTEGER { raps(0), vpls(1) }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The protocol that controls the main ring."
    DEFVAL      { raps }
    ::= { prvtRapsInstEntry 20 }

prvtRapsInstMonVlanTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PrvtRapsInstMonVlanEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Monitor VLAN Table
         Each entry in this table defines a VLAN that will be monitored.
         Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps')."
    ::= { prvtRapsMIBObjects 2 }

prvtRapsInstMonVlanEntry OBJECT-TYPE
    SYNTAX      PrvtRapsInstMonVlanEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "An entry in prvtRapsInstMonVlanTable."
    INDEX       { prvtRapsInstIndex, prvtRapsInstMonVlanId }
    ::= { prvtRapsInstMonVlanTable 1 }

PrvtRapsInstMonVlanEntry ::= SEQUENCE {
    prvtRapsInstMonVlanId           PrvtRapsVlanIdType,
    prvtRapsInstMonVlanRowStatus    RowStatus
}

prvtRapsInstMonVlanId OBJECT-TYPE
    SYNTAX      PrvtRapsVlanIdType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Uniquely identifies a VLAN to be monitored.
         This object must be the ID of an existing VLAN.
         Must not be the same VLAN as the control VLAN (prvtRapsInstControlVlan)."
    ::= { prvtRapsInstMonVlanEntry 1 }

prvtRapsInstMonVlanRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The RowStatus for this monitored VLAN."
    ::= { prvtRapsInstMonVlanEntry 2 }

prvtRapsInstRingPortTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PrvtRapsInstRingPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "R-APS Instance Ring Port Table.
         Each entry in this table defines a port belonging to a R-APS instance.
         Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps').
         Exactly two interfaces must be defined per instance. This includes physical
         ports (defined in prvtRapsInstRingPortTable) and LAG interfaces (defined
         in prvtRapsInstRingLagTable). In the case when one physical port and one
         LAG interface is used, the two port index values must be unique (i.e.
         prvtRapsInstRingPortIndex must not equal prvtRapsInstRingLagIndex)"
    ::= { prvtRapsMIBObjects 3 }

prvtRapsInstRingPortEntry OBJECT-TYPE
    SYNTAX      PrvtRapsInstRingPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "An entry in prvtRapsInstRingPortTable."
    INDEX       { prvtRapsInstIndex, prvtRapsInstRingPortIndex }
    ::= { prvtRapsInstRingPortTable 1 }

PrvtRapsInstRingPortEntry ::= SEQUENCE {
    prvtRapsInstRingPortIndex               Unsigned32,
    prvtRapsInstRingPortRowStatus           RowStatus,
    prvtRapsInstRingPortIfIndex             InterfaceIndex,
    prvtRapsInstRingPortMep                 PrvtRapsMepIdType,
    prvtRapsInstRingPortRpl                 TruthValue,
    prvtRapsInstRingPortManSwitch           PrvtRapsActionType,
    prvtRapsInstRingPortForcedSwitch        PrvtRapsActionType,
    prvtRapsInstRingPortMonitoringMethod    PrvtRapsMonitoringMethodType
}

prvtRapsInstRingPortIndex OBJECT-TYPE
    SYNTAX      Unsigned32 (0..1)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "An arbitrary index uniquely identifying a physical port belonging to a
         R-APS instance.
         When a physical port and a LAG port are used in the same R-APS instance,
         the two ports must use unique index values (i.e.
         prvtRapsInstRingPortIndex must not equal prvtRapsInstRingLagIndex)."
    ::= { prvtRapsInstRingPortEntry 1 }

prvtRapsInstRingPortRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The RowStatus for this ring port."
    ::= { prvtRapsInstRingPortEntry 2 }

prvtRapsInstRingPortIfIndex OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The ifIndex of the physical port assigned to this ring port.
         No two ports within the same ring instance can use the same physical port."
    ::= { prvtRapsInstRingPortEntry 3 }

prvtRapsInstRingPortMep OBJECT-TYPE
    SYNTAX      PrvtRapsMepIdType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The peer maintenance entity group end point ID that should monitor this ring port.
         No two ports within the same ring instance can use the same MEP ID."
    ::= { prvtRapsInstRingPortEntry 4 }

prvtRapsInstRingPortRpl OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Set to 'true' to define this ring port as a Ring Protection Link port.
         Exactly one RPL port must be defined when ring role (prvtRapsInstRole)
         is not 'simpleNode'.
         In 'simpleNode' role, no RPL ports must be defined."
    ::= { prvtRapsInstRingPortEntry 5 }

prvtRapsInstRingPortManSwitch OBJECT-TYPE
    SYNTAX      PrvtRapsActionType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Send the Manual Switch command to this ring port."
    ::= { prvtRapsInstRingPortEntry 6 }

prvtRapsInstRingPortForcedSwitch OBJECT-TYPE
    SYNTAX      PrvtRapsActionType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Send the Forced Switch command to this ring port."
    ::= { prvtRapsInstRingPortEntry 7 }

prvtRapsInstRingPortMonitoringMethod OBJECT-TYPE
    SYNTAX      PrvtRapsMonitoringMethodType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Ethernet ring protection monitoring methods"
    ::= { prvtRapsInstRingPortEntry 8 }

prvtRapsInstRingLagTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PrvtRapsInstRingLagEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "R-APS Instance Ring LAG Table
         Each entry in this table defines a Link Aggregation Group interface belonging
         to a R-APS instance.
         Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps').
         Exactly two interfaces must be defined per instance. This includes physical
         ports (defined in prvtRapsInstRingPortTable) and LAG interfaces (defined
         in prvtRapsInstRingLagTable)."
    ::= { prvtRapsMIBObjects 4 }

prvtRapsInstRingLagEntry OBJECT-TYPE
    SYNTAX      PrvtRapsInstRingLagEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "An entry in prvtRapsInstRingLagTable."
    INDEX       { prvtRapsInstIndex, prvtRapsInstRingLagIndex }
    ::= { prvtRapsInstRingLagTable 1 }

PrvtRapsInstRingLagEntry ::= SEQUENCE {
    prvtRapsInstRingLagIndex            Unsigned32,
    prvtRapsInstRingLagRowStatus        RowStatus,
    prvtRapsInstRingLagId               PrvtRapsLinkAggIdType,
    prvtRapsInstRingLagMep              PrvtRapsMepIdType,
    prvtRapsInstRingLagRpl              TruthValue,
    prvtRapsInstRingLagManSwitch        PrvtRapsActionType,
    prvtRapsInstRingLagForcedSwitch     PrvtRapsActionType
}

prvtRapsInstRingLagIndex OBJECT-TYPE
    SYNTAX      Unsigned32 (0..1)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "An arbitrary index uniquely identifying a LAG interface belonging to a
         R-APS instance.
         When a physical port and a LAG port are used in the same R-APS instance,
         the two ports must use unique index values (i.e.
         prvtRapsInstRingPortIndex must not equal prvtRapsInstRingLagIndex)."
    ::= { prvtRapsInstRingLagEntry 1 }

prvtRapsInstRingLagRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The RowStatus for this LAG interface."
    ::= { prvtRapsInstRingLagEntry 2 }

prvtRapsInstRingLagId OBJECT-TYPE
    SYNTAX      PrvtRapsLinkAggIdType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The ID of a LAG interface belonging to a R-APS instance.
         This object must be set to the ID of an existing LAG interface.
         No two LAG ports within the same ring instance can use the same LAG port."
    ::= { prvtRapsInstRingLagEntry 3 }

prvtRapsInstRingLagMep OBJECT-TYPE
    SYNTAX      PrvtRapsMepIdType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The peer maintenance entity group end point ID that should monitor this LAG interface.
         No two LAG ports within the same ring instance can use the same MEP ID."
    ::= { prvtRapsInstRingLagEntry 4 }

prvtRapsInstRingLagRpl OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Set to 'true' to define this ring LAG port as a Ring Protection Link port.
         Exactly one RPL port must be defined when ring role (prvtRapsInstRole)
         is not 'simpleNode'.
         In 'simpleNode' role, no RPL ports must be defined."
    ::= { prvtRapsInstRingLagEntry 5 }

prvtRapsInstRingLagManSwitch OBJECT-TYPE
    SYNTAX      PrvtRapsActionType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Send the Manual Switch command to this LAG interface."
    ::= { prvtRapsInstRingLagEntry 6 }

prvtRapsInstRingLagForcedSwitch OBJECT-TYPE
    SYNTAX      PrvtRapsActionType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Send the Forced Switch command to this LAG interface."
    ::= { prvtRapsInstRingLagEntry 7 }

prvtRapsInstPortStatusTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PrvtRapsInstPortStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "R-APS Instance Port Status Table
         Each entry in this table gives status information concerning a
         particular port (physical port or LAG interface port) belonging
         to a R-APS instance."
    ::= { prvtRapsMIBObjects 5 }

prvtRapsInstPortStatusEntry OBJECT-TYPE
    SYNTAX      PrvtRapsInstPortStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "An entry in prvtRapsInstPortStatusTable."
    INDEX       { prvtRapsInstIndex, prvtRapsInstPortStatusIfIndex }
    ::= { prvtRapsInstPortStatusTable 1 }

PrvtRapsInstPortStatusEntry ::= SEQUENCE {
    prvtRapsInstPortStatusIfIndex       PrvtRapsIfIndexOrAgIdType,
    prvtRapsInstPortStatusLink          PrvtRapsLinkOperStatusType,
    prvtRapsInstPortStatusRemoteMep     PrvtRapsMepIdType,
    prvtRapsInstPortStatusRcvdNodeId    MacAddress,
    prvtRapsInstPortStatusRcvdCmd       PrvtRapsReceivedCommandType,
    prvtRapsInstPortStatusRcvdInfo      PrvtRapsReceivedInfoType
}

prvtRapsInstPortStatusIfIndex OBJECT-TYPE
    SYNTAX      PrvtRapsIfIndexOrAgIdType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Uniquely identifies a physical port (ifIndex) or a LAG port (LAG ID)
         belonging to a R-APS instance."
    ::= { prvtRapsInstPortStatusEntry 1 }

prvtRapsInstPortStatusLink OBJECT-TYPE
    SYNTAX      PrvtRapsLinkOperStatusType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The operational status of this port."
    ::= { prvtRapsInstPortStatusEntry 2 }

prvtRapsInstPortStatusRemoteMep OBJECT-TYPE
    SYNTAX      PrvtRapsMepIdType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The maintenance entity group end point ID for the remote port connected to this port."
    ::= { prvtRapsInstPortStatusEntry 3 }

prvtRapsInstPortStatusRcvdNodeId OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The MAC address of the remote R-APS device connected to this port."
    ::= { prvtRapsInstPortStatusEntry 4 }

prvtRapsInstPortStatusRcvdCmd OBJECT-TYPE
    SYNTAX      PrvtRapsReceivedCommandType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The command received on this port."
    ::= { prvtRapsInstPortStatusEntry 5 }

prvtRapsInstPortStatusRcvdInfo OBJECT-TYPE
    SYNTAX      PrvtRapsReceivedInfoType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The info received on this port."
    ::= { prvtRapsInstPortStatusEntry 6 }

prvtRapsInstSubRingTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PrvtRapsInstSubRingEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "R-APS Instance Sub-ring Table
         Each entry in this table defines a sub-ring belonging to a R-APS instance.
         Sub-rings are not available in version 1 mode."
    ::= { prvtRapsMIBObjects 6 }

prvtRapsInstSubRingEntry OBJECT-TYPE
    SYNTAX      PrvtRapsInstSubRingEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "An entry in prvtRapsInstSubRingTable."
    INDEX       { prvtRapsInstIndex, prvtRapsInstSubRingIndex }
    ::= { prvtRapsInstSubRingTable 1 }

PrvtRapsInstSubRingEntry ::= SEQUENCE {
    prvtRapsInstSubRingIndex            PrvtRapsInstIndexType,
    prvtRapsInstSubRingRowStatus        RowStatus,
    prvtRapsInstSubRingId               PrvtRapsRingIdType,
    prvtRapsInstSubRingRole             PrvtRapsRoleType,
    prvtRapsInstSubRingVirtChanVlan     PrvtRapsVlanIdType,
    prvtRapsInstSubRingRevertiveMode    TruthValue,
    prvtRapsInstSubRingHoldOffTimer     PrvtRapsHoldOffType,
    prvtRapsInstSubRingWaitTimer        PrvtRapsWaitTimerType,
    prvtRapsInstSubRingGuardTimer       PrvtRapsGuardTimerType,
    prvtRapsInstSubRingBlockTimer       PrvtRapsBlockTimerType,
    prvtRapsInstSubRingPropTopChng      TruthValue,
    prvtRapsInstSubRingShutdown         TruthValue,
    prvtRapsInstSubRingClear            PrvtRapsActionType,
    prvtRapsInstSubRingManualSwitch     PrvtRapsActionType,
    prvtRapsInstSubRingForcedSwitch     PrvtRapsActionType,
    prvtRapsInstSubRingOperStatus       PrvtRapsInstStatusType,
    prvtRapsInstSubRingRapsState        PrvtRapsStatesType,
    prvtRapsInstSubRingTopPriCmd        PrvtRapsTopPriCmdType,
    prvtRapsInstSubRingPortName         OCTET STRING,
    prvtRapsInstSubRingLinkStatus       PrvtRapsLinkOperStatusType,
    prvtRapsInstSubRingRcvdNodeId       MacAddress,
    prvtRapsInstSubRingRcvdCmd          PrvtRapsReceivedCommandType,
    prvtRapsInstSubRingRcvdInfo         PrvtRapsReceivedInfoType,
    prvtRapsInstSubRingDescription      DisplayString,
    prvtRapsInstSubRingVcRcvdNodeId     MacAddress,
    prvtRapsInstSubRingVcRcvdCmd        PrvtRapsReceivedCommandType,
    prvtRapsInstSubRingVcRcvdInfo       PrvtRapsReceivedInfoType,
    prvtRapsInstSubRingVirtChanSvc      Unsigned32,
    prvtRapsInstSubRingControlVlan      PrvtRapsVlanIdType
}

prvtRapsInstSubRingIndex OBJECT-TYPE
    SYNTAX      PrvtRapsInstIndexType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "An arbitrary index uniquely identifying a sub-ring for this R-APS instance."
    ::= { prvtRapsInstSubRingEntry 1 }

prvtRapsInstSubRingRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The RowStatus for this sub-ring."
    ::= { prvtRapsInstSubRingEntry 2 }

prvtRapsInstSubRingId OBJECT-TYPE
    SYNTAX      PrvtRapsRingIdType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The ring ID for this sub-ring."
    ::= { prvtRapsInstSubRingEntry 3 }

prvtRapsInstSubRingRole OBJECT-TYPE
    SYNTAX      PrvtRapsRoleType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The role of the node inside this sub-ring.
         Must perform shutdown to change this object."
    ::= { prvtRapsInstSubRingEntry 4 }

prvtRapsInstSubRingVirtChanVlan OBJECT-TYPE
    SYNTAX      PrvtRapsVlanIdType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Configures the virtual channel VLAN for this sub-ring.
         Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps').
         Must be a VLAN from the prvtRapsInstMonVlanTable.
         No two sub-rings can use the same VLAN for the virtual channel VLAN."
    ::= { prvtRapsInstSubRingEntry 5 }

prvtRapsInstSubRingRevertiveMode OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Set to 'true' to select revertive behavior for this sub-ring."
    ::= { prvtRapsInstSubRingEntry 6 }

prvtRapsInstSubRingHoldOffTimer OBJECT-TYPE
    SYNTAX      PrvtRapsHoldOffType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The hold-off timer time-out value for this sub-ring."
    ::= { prvtRapsInstSubRingEntry 7 }

prvtRapsInstSubRingWaitTimer OBJECT-TYPE
    SYNTAX      PrvtRapsWaitTimerType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The wait-to-restore timer time-out value for this sub-ring."
    ::= { prvtRapsInstSubRingEntry 8 }

prvtRapsInstSubRingGuardTimer OBJECT-TYPE
    SYNTAX      PrvtRapsGuardTimerType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The guard timer time-out value for this sub-ring."
    ::= { prvtRapsInstSubRingEntry 9 }

prvtRapsInstSubRingBlockTimer OBJECT-TYPE
    SYNTAX      PrvtRapsBlockTimerType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The wait to block timer time-out value for this sub-ring."
    ::= { prvtRapsInstSubRingEntry 10 }

prvtRapsInstSubRingPropTopChng OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Set to 'true' to enable topology change propagation for this sub-ring."
    ::= { prvtRapsInstSubRingEntry 11 }

prvtRapsInstSubRingShutdown OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Set to 'true' to de-activate this sub-ring."
    ::= { prvtRapsInstSubRingEntry 12 }

prvtRapsInstSubRingClear OBJECT-TYPE
    SYNTAX      PrvtRapsActionType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Send the Clear command to this sub-ring."
    ::= { prvtRapsInstSubRingEntry 13 }

prvtRapsInstSubRingManualSwitch OBJECT-TYPE
    SYNTAX      PrvtRapsActionType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Send the Manual Switch command to this sub-ring."
    ::= { prvtRapsInstSubRingEntry 14 }

prvtRapsInstSubRingForcedSwitch OBJECT-TYPE
    SYNTAX      PrvtRapsActionType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Send the Forced Switch command to this sub-ring."
    ::= { prvtRapsInstSubRingEntry 15 }

prvtRapsInstSubRingOperStatus OBJECT-TYPE
    SYNTAX      PrvtRapsInstStatusType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The operational status of this sub-ring."
    ::= { prvtRapsInstSubRingEntry 16 }

prvtRapsInstSubRingRapsState OBJECT-TYPE
    SYNTAX      PrvtRapsStatesType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The current state of this sub-ring."
    ::= { prvtRapsInstSubRingEntry 17 }

prvtRapsInstSubRingTopPriCmd OBJECT-TYPE
    SYNTAX      PrvtRapsTopPriCmdType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The received Top Priority Request and Status value for this sub-ring."
    ::= { prvtRapsInstSubRingEntry 18 }

prvtRapsInstSubRingPortName OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The textual name of the port belonging to this sub-ring.
         For a physical port, the format is U/S/P.
         For a LAG interface, the format is agX."
    ::= { prvtRapsInstSubRingEntry 19 }

prvtRapsInstSubRingLinkStatus OBJECT-TYPE
    SYNTAX      PrvtRapsLinkOperStatusType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The operational status of the port belonging to this sub-ring."
    ::= { prvtRapsInstSubRingEntry 20 }

prvtRapsInstSubRingRcvdNodeId OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The MAC address of the remote R-APS device connected to the port belonging to this sub-ring."
    ::= { prvtRapsInstSubRingEntry 21 }

prvtRapsInstSubRingRcvdCmd OBJECT-TYPE
    SYNTAX      PrvtRapsReceivedCommandType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The command received on the port belonging to this sub-ring."
    ::= { prvtRapsInstSubRingEntry 22 }

prvtRapsInstSubRingRcvdInfo OBJECT-TYPE
    SYNTAX      PrvtRapsReceivedInfoType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The info received on the port belonging to this sub-ring."
    ::= { prvtRapsInstSubRingEntry 23 }

prvtRapsInstSubRingDescription OBJECT-TYPE
    SYNTAX      DisplayString (SIZE(0..255))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "RAPS instance sub-ring description."
    ::= { prvtRapsInstSubRingEntry 24 }

prvtRapsInstSubRingVcRcvdNodeId OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The MAC address of the remote R-APS device connected through the virtual channel."
    ::= { prvtRapsInstSubRingEntry 25 }

prvtRapsInstSubRingVcRcvdCmd OBJECT-TYPE
    SYNTAX      PrvtRapsReceivedCommandType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The command received through the virtual channel belonging to this sub-ring."
    ::= { prvtRapsInstSubRingEntry 26 }

prvtRapsInstSubRingVcRcvdInfo OBJECT-TYPE
    SYNTAX      PrvtRapsReceivedInfoType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The info received through the virtual channel belonging to this sub-ring."
    ::= { prvtRapsInstSubRingEntry 27 }

prvtRapsInstSubRingVirtChanSvc OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967294)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Configure the virtual channel service for this sub-ring.
         Only applicable when main ring's control protocol is vpls (prvtRapsInstControlProtocol equals 'vpls').
         Must be a service ID from PRVT-SERV-MIB::serviceId.
         No two sub-rings can use the same service ID for the virtual channel service."
    ::= { prvtRapsInstSubRingEntry 28 }

prvtRapsInstSubRingControlVlan OBJECT-TYPE
    SYNTAX      PrvtRapsVlanIdType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The control VLAN for this sub-ring.
         This object must be set to the ID of an existing VLAN.
         Must not be the same VLAN as a monitored VLAN in any instance.
         Must perform shutdown to change this object."
    ::= { prvtRapsInstSubRingEntry 29 }

prvtRapsInstSubRingPortTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PrvtRapsInstSubRingPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "R-APS Instance Sub-ring port Table
         An entry in this table defines a physical port belonging to a sub-ring.
         Exactly one interface must be defined per sub-ring. This includes physical
         ports (defined in prvtRapsInstSubRingPortTable) and LAG interfaces (defined
         in prvtRapsInstSubRingLagTable).
         A sub-ring port can not be part of the main ring."
    ::= { prvtRapsMIBObjects 7 }

prvtRapsInstSubRingPortEntry OBJECT-TYPE
    SYNTAX      PrvtRapsInstSubRingPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "An entry in prvtRapsInstSubRingPortTable."
    INDEX       { prvtRapsInstIndex, prvtRapsInstSubRingIndex, ifIndex }
    ::= { prvtRapsInstSubRingPortTable 1 }

PrvtRapsInstSubRingPortEntry ::= SEQUENCE {
    prvtRapsInstSubRingPortRowStatus            RowStatus,
    prvtRapsInstSubRingPortMep                  PrvtRapsMepIdType,
    prvtRapsInstSubRingPortRpl                  TruthValue,
    prvtRapsInstSubRingPortMonitoringMethod     PrvtRapsMonitoringMethodType
}

prvtRapsInstSubRingPortRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The RowStatus for this sub-ring port."
    ::= { prvtRapsInstSubRingPortEntry 1 }

prvtRapsInstSubRingPortMep OBJECT-TYPE
    SYNTAX      PrvtRapsMepIdType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The peer maintenance entity group end point ID that should monitor this sub-ring port.
         A sub-ring MEP can not be used in another ring."
    ::= { prvtRapsInstSubRingPortEntry 2 }

prvtRapsInstSubRingPortRpl OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Set to 'true' to define this sub-ring port as a Ring Protection Link port.
         Exactly one RPL port must be defined when sub-ring role (prvtRapsInstSubRingRole)
         is not 'simpleNode'.
         In 'simpleNode' role, no RPL ports must be defined."
    ::= { prvtRapsInstSubRingPortEntry 3 }

prvtRapsInstSubRingPortMonitoringMethod OBJECT-TYPE
    SYNTAX      PrvtRapsMonitoringMethodType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Ethernet ring protection monitoring methods"
    ::= { prvtRapsInstSubRingPortEntry 4 }

prvtRapsInstSubRingLagTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PrvtRapsInstSubRingLagEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "R-APS Instance Sub-ring LAG interface Table
         An entry in this table defines a LAG interface belonging to a sub-ring.
         Exactly one interface must be defined per sub-ring. This includes physical
         ports (defined in prvtRapsInstSubRingPortTable) and LAG interfaces (defined
         in prvtRapsInstSubRingLagTable)."
    ::= { prvtRapsMIBObjects 8 }

prvtRapsInstSubRingLagEntry OBJECT-TYPE
    SYNTAX      PrvtRapsInstSubRingLagEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "An entry in prvtRapsInstSubRingLagTable."
    INDEX       { prvtRapsInstIndex, prvtRapsInstSubRingIndex, 
                  prvtRapsInstSubRingLagId }
    ::= { prvtRapsInstSubRingLagTable 1 }

PrvtRapsInstSubRingLagEntry ::= SEQUENCE {
    prvtRapsInstSubRingLagId                PrvtRapsLinkAggIdType,
    prvtRapsInstSubRingLagRowStatus         RowStatus,
    prvtRapsInstSubRingLagMep               PrvtRapsMepIdType,
    prvtRapsInstSubRingLagRpl               TruthValue,
    prvtRapsInstSubRingLagMonitoringMethod  PrvtRapsMonitoringMethodType
}

prvtRapsInstSubRingLagId OBJECT-TYPE
    SYNTAX      PrvtRapsLinkAggIdType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Uniquely identifies a LAG interface belonging to a sub-ring.
         Must be set to the LAG ID of an existing LAG interface.
         A sub-ring LAG port can not be part of the main ring."
    ::= { prvtRapsInstSubRingLagEntry 1 }

prvtRapsInstSubRingLagRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The RowStatus for this sub-ring LAG interface."
    ::= { prvtRapsInstSubRingLagEntry 2 }

prvtRapsInstSubRingLagMep OBJECT-TYPE
    SYNTAX      PrvtRapsMepIdType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The peer maintenance entity group end point ID that should monitor this sub-ring LAG interface.
         A sub-ring MEP can not be used in another ring."
    ::= { prvtRapsInstSubRingLagEntry 3 }

prvtRapsInstSubRingLagRpl OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Set to 'true' to define this sub-ring LAG port as a Ring Protection Link port.
         Exactly one RPL port must be defined when sub-ring role (prvtRapsInstSubRingRole)
         is not 'simpleNode'.
         In 'simpleNode' role, no RPL ports must be defined."
    ::= { prvtRapsInstSubRingLagEntry 4 }

prvtRapsInstSubRingLagMonitoringMethod OBJECT-TYPE
    SYNTAX      PrvtRapsMonitoringMethodType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Ethernet ring protection monitoring methods"
    ::= { prvtRapsInstSubRingLagEntry 5 }

prvtRapsDefectAlarm NOTIFICATION-TYPE
    OBJECTS     { prvtRapsInstOperStatus, prvtRapsInstControlVlan }
    STATUS      current
    DESCRIPTION 
        "This trap will be sent by any instance when it notices a defect.
         So far only the situation when two or more RPL-owners are defined
         in the ring is identified as a defect. This scenario is noticed when
         the instance with the RPL-Owner role receives a RAPS packet with the
         RB bit set in its status field from a different NodeID than its own.
         The management entity receiving the notification can identify
         the system from the network source address of the
         notification."
    ::= { prvtRapsMIBNotifications 1 }

prvtRapsSwitchoverAlarm NOTIFICATION-TYPE
    OBJECTS     { prvtRapsInstRapsState, prvtRapsInstControlVlan }
    STATUS      current
    DESCRIPTION 
        "This trap will be sent by any instance when it changes state.
         The management entity receiving the notification can identify
         the system from the network source address of the
         notification"
    ::= { prvtRapsMIBNotifications 2 }

prvtRapsInstSubRingDefectAlarm NOTIFICATION-TYPE
    OBJECTS     { prvtRapsInstSubRingOperStatus, 
                  prvtRapsInstSubRingControlVlan }
    STATUS      current
    DESCRIPTION 
        "This trap will be sent by any subring instance when it notices a defect.
         So far only the situation when two or more RPL-owners are defined
         in the ring is identified as a defect. This scenario is noticed when
         the instance with the RPL-Owner role receives a RAPS packet with the
         RB bit set in its status field from a different NodeID than its own.
         The management entity receiving the notification can identify
         the system from the network source address of the
         notification, and can identify the instance reporting the change
         by the indices in the OID of the prvtRapsInstSubRingOperStatus
         variable in the notification."
    ::= { prvtRapsMIBNotifications 3 }

prvtRapsInstSubRingSwitchoverAlarm NOTIFICATION-TYPE
    OBJECTS     { prvtRapsInstSubRingRapsState, 
                  prvtRapsInstSubRingControlVlan }
    STATUS      current
    DESCRIPTION 
        "This trap will be sent by any subring instance when it changes state.
         The management entity receiving the notification can identify
         the system from the network source address of the
         notification, and can identify the instance reporting the change
         by the indices in the OID of the prvtRapsInstSubRingRapsState
         variable in the notification."
    ::= { prvtRapsMIBNotifications 4 }

END -- end of module PRVT-RAPS-MIB.