-- *********************************************************************
-- **
-- ** BATM Advanced Communications.
-- **
-- *********************************************************************
-- ** Filename: PRVT-SYNC-ETHERNET-MIB.mib
-- ** Project: T-Metro Switches.
-- ** Purpose: Private MIB
-- *********************************************************************
-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
-- WARNING:
--
-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
--
-- This file is the property of BATM Advanced Communications and contains
-- proprietary and confidential information. This file is made
-- available to authorized BATM customers on the express
-- condition that neither it, nor any of the information contained
-- therein, shall be disclosed to third parties or be used for any
-- purpose other than to replace, modify or upgrade firmware and/or
-- software components of BATM manufactured equipment within the
-- authorized customer's network, and that such transfer be
-- completed in accordance with the instructions provided by
-- BATM. Any other use is strictly prohibited.
--
-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
--
-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
--
-- ----------------------------------------------------------------------------

PRVT-SYNC-ETHERNET-MIB DEFINITIONS ::= BEGIN

IMPORTS
    ifIndex
        FROM IF-MIB
    switch
        FROM PRVT-SWITCH-MIB
    Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, 
    Unsigned32
        FROM SNMPv2-SMI
    DateAndTime, RowStatus, TEXTUAL-CONVENTION, TruthValue
        FROM SNMPv2-TC;

prvtSyncEthernetMIB MODULE-IDENTITY
    LAST-UPDATED "201011100000Z"
    ORGANIZATION 
        "BATM Advanced Communication"
    CONTACT-INFO 
        "BATM/Telco Systems Support team
         Email:
         For North America: techsupport@telco.com
         For North Europe: support@batm.de, info@batm.de
         For the rest of the world: techsupport@telco.com"
    DESCRIPTION 
        "This is the MIB module to manage
         synchronization over ethernet."
    REVISION    "201011100000Z"
    DESCRIPTION 
        "Initial"
    ::= { switch 170 }


PrvtSyncEthernetQualityLevelType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION 
        "Clock Quality Levels."
    SYNTAX      INTEGER { prc(2), ssuA(4), ssuB(8), sec(11), dnu(15), 
                    stu(16), prs(17), tnc(20), st2(23), st3(26), smc(28), 
                    st3e(29), prov(30), dus(31), invalid(64), failed(65) }

prvtSyncEthernetMIBNotifications OBJECT IDENTIFIER
    ::= { prvtSyncEthernetMIB 0 }

prvtSyncEthernetMIBObjects OBJECT IDENTIFIER
    ::= { prvtSyncEthernetMIB 1 }

syncEthernetHoldOffTime OBJECT-TYPE
    SYNTAX      Integer32 (300..1800)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Timeout value, in millisseconds, for the hold-off timer."
    ::= { prvtSyncEthernetMIBObjects 1 }

syncEthernetWaitToRestoreTime OBJECT-TYPE
    SYNTAX      Integer32 (0..12)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Timeout value, in minutes, for the wait-to-restore timer."
    ::= { prvtSyncEthernetMIBObjects 2 }

syncEthernetG781OptionMode OBJECT-TYPE
    SYNTAX      INTEGER { option1(1), option2(2) }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Specify which G.781 option mode to operate in."
    ::= { prvtSyncEthernetMIBObjects 3 }

syncEthernetClockSourceTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF SyncEthernetClockSourceEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Source clock synchronization table."
    ::= { prvtSyncEthernetMIBObjects 10 }

syncEthernetClockSourceEntry OBJECT-TYPE
    SYNTAX      SyncEthernetClockSourceEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Source clock synchronization entry."
    INDEX       { ifIndex }
    ::= { syncEthernetClockSourceTable 1 }

SyncEthernetClockSourceEntry ::= SEQUENCE {
    syncEthernetClockSourceRowStatus                    RowStatus,
    syncEthernetClockSourceAdminStatus                  INTEGER,
    syncEthernetClockSourceEsmc                         TruthValue,
    syncEthernetClockSourceFrequency                    Unsigned32,
    syncEthernetClockSourceQuality                      PrvtSyncEthernetQualityLevelType,
    syncEthernetClockSourceQualityChangeNotify          TruthValue,
    syncEthernetClockSourceRecvQualityLevel             PrvtSyncEthernetQualityLevelType,
    syncEthernetClockSourceLastRecvEsmcPduTime          DateAndTime,
    syncEthernetClockSourceLastRecvEsmcErrorPduTime     DateAndTime,
    syncEthernetClockSourceLastRecvEsmcPduType          Unsigned32,
    syncEthernetClockSourceLastRecvLastError            Unsigned32,
    syncEthernetClockSourceNumRecvEsmcPdu               Unsigned32,
    syncEthernetClockSourceNumDiscEsmcPdu               Unsigned32,
    syncEthernetClockSourceNumSignalFail                Unsigned32,
    syncEthernetClockSourceQualityInvalidNotify         TruthValue,
    syncEthernetClockSourceEsmcInvalidNotify            TruthValue
}

syncEthernetClockSourceRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Clock source synchronization table rowstatus."
    ::= { syncEthernetClockSourceEntry 2 }

syncEthernetClockSourceAdminStatus OBJECT-TYPE
    SYNTAX      INTEGER { up(1), down(2) }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Enable clock source."
    ::= { syncEthernetClockSourceEntry 3 }

syncEthernetClockSourceEsmc OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Enable receiving ESMC messages (Synchronization Status Messages).
         Only applicable for BITS clock sources."
    ::= { syncEthernetClockSourceEntry 4 }

syncEthernetClockSourceFrequency OBJECT-TYPE
    SYNTAX      Unsigned32 (0..2431)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Specify input frequency - N*8kHz
         Only applicable for BITS clock sources."
    ::= { syncEthernetClockSourceEntry 5 }

syncEthernetClockSourceQuality OBJECT-TYPE
    SYNTAX      PrvtSyncEthernetQualityLevelType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Specify quality level
         In G781-option I mode, valid values are prs, ssuA, ssuB, dnu.
         In G781-option II mode, valid values are stu, prs, tnc, st2, st3, smc, st3e, dus, prov."
    ::= { syncEthernetClockSourceEntry 6 }

syncEthernetClockSourceQualityChangeNotify OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Enable quality level change notifications"
    ::= { syncEthernetClockSourceEntry 7 }

syncEthernetClockSourceRecvQualityLevel OBJECT-TYPE
    SYNTAX      PrvtSyncEthernetQualityLevelType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The received quality level value."
    ::= { syncEthernetClockSourceEntry 8 }

syncEthernetClockSourceLastRecvEsmcPduTime OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Time elapsed since the last valid ESMC message received"
    ::= { syncEthernetClockSourceEntry 9 }

syncEthernetClockSourceLastRecvEsmcErrorPduTime OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Time elapsed since the last invalid ESMC message received"
    ::= { syncEthernetClockSourceEntry 10 }

syncEthernetClockSourceLastRecvEsmcPduType OBJECT-TYPE
    SYNTAX      Unsigned32 (0..255)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Last received ESMC message type"
    ::= { syncEthernetClockSourceEntry 11 }

syncEthernetClockSourceLastRecvLastError OBJECT-TYPE
    SYNTAX      Unsigned32 (0..255)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Last error code"
    ::= { syncEthernetClockSourceEntry 12 }

syncEthernetClockSourceNumRecvEsmcPdu OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Total number of received ESMC messages"
    ::= { syncEthernetClockSourceEntry 13 }

syncEthernetClockSourceNumDiscEsmcPdu OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Total number of discarded ESMC messages"
    ::= { syncEthernetClockSourceEntry 14 }

syncEthernetClockSourceNumSignalFail OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Total number of generated signal failure events"
    ::= { syncEthernetClockSourceEntry 15 }

syncEthernetClockSourceQualityInvalidNotify OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Enable invalid quality notifications"
    ::= { syncEthernetClockSourceEntry 16 }

syncEthernetClockSourceEsmcInvalidNotify OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Enable invalid ESMC notifications"
    ::= { syncEthernetClockSourceEntry 17 }

syncEthernetClockOutputTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF SyncEthernetClockOutputEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Output clock synchronization table."
    ::= { prvtSyncEthernetMIBObjects 12 }

syncEthernetClockOutputEntry OBJECT-TYPE
    SYNTAX      SyncEthernetClockOutputEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Output clock synchronization entry."
    INDEX       { ifIndex }
    ::= { syncEthernetClockOutputTable 1 }

SyncEthernetClockOutputEntry ::= SEQUENCE {
    syncEthernetClockOutputRowStatus                    RowStatus,
    syncEthernetClockOutputEsmc                         TruthValue,
    syncEthernetClockOutputFrequency                    Unsigned32,
    syncEthernetClockOutputDpll                         Integer32,
    syncEthernetClockOutputQualityLevel                 PrvtSyncEthernetQualityLevelType,
    syncEthernetClockOutputLastQualityLevelChange       DateAndTime,
    syncEthernetClockOutputMsgEvent                     TruthValue,
    syncEthernetClockOutputNumTransmittedEsmcPdu        Unsigned32,
    syncEthernetClockOutputNumTransmittedEventEsmcPdu   Unsigned32
}

syncEthernetClockOutputRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "syncEthernetClockOutput table rowStatus"
    ::= { syncEthernetClockOutputEntry 2 }

syncEthernetClockOutputEsmc OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Enable sending ESMC messages
         Only applicable for BITS clock outputs."
    ::= { syncEthernetClockOutputEntry 3 }

syncEthernetClockOutputFrequency OBJECT-TYPE
    SYNTAX      Unsigned32 (0..2431)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Specify output frequency - N*8kHz
         Only applicable for BITS clock outputs."
    ::= { syncEthernetClockOutputEntry 4 }

syncEthernetClockOutputDpll OBJECT-TYPE
    SYNTAX      Integer32 (0..1)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Assign output clock to DPLL
         Only applicable for BITS clock outputs.
         Must be set to the syncEthernetDpllModuleId value of an existing
         row in syncEthernetDpllTable."
    ::= { syncEthernetClockOutputEntry 5 }

syncEthernetClockOutputQualityLevel OBJECT-TYPE
    SYNTAX      PrvtSyncEthernetQualityLevelType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Last quality level value sent"
    ::= { syncEthernetClockOutputEntry 6 }

syncEthernetClockOutputLastQualityLevelChange OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Time elapsed since the last quality level change"
    ::= { syncEthernetClockOutputEntry 7 }

syncEthernetClockOutputMsgEvent OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Last ESMC message type sent"
    ::= { syncEthernetClockOutputEntry 8 }

syncEthernetClockOutputNumTransmittedEsmcPdu OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Total number of ESMC messages sent"
    ::= { syncEthernetClockOutputEntry 9 }

syncEthernetClockOutputNumTransmittedEventEsmcPdu OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Total number of ESMC messages sent"
    ::= { syncEthernetClockOutputEntry 10 }

syncEthernetDpllTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF SyncEthernetDpllEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Synchronization DPLL table"
    ::= { prvtSyncEthernetMIBObjects 14 }

syncEthernetDpllEntry OBJECT-TYPE
    SYNTAX      SyncEthernetDpllEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Synchronization DPLL entry"
    INDEX       { syncEthernetDpllModuleId }
    ::= { syncEthernetDpllTable 1 }

SyncEthernetDpllEntry ::= SEQUENCE {
    syncEthernetDpllModuleId                        Integer32,
    syncEthernetDpllRowStatus                       RowStatus,
    syncEthernetDpllAdminStatus                     INTEGER,
    syncEthernetDpllReferenceSelection              INTEGER,
    syncEthernetDpllEnableQualityLevel              TruthValue,
    syncEthernetDpllStatusChangeNotify              TruthValue,
    syncEthernetDpllReferenceChangeNotify           TruthValue,
    syncEthernetDpllStatus                          INTEGER,
    syncEthernetDpllStatusLastChange                DateAndTime,
    syncEthernetDpllSystemQualityLevel              PrvtSyncEthernetQualityLevelType,
    syncEthernetDpllSystemQualityLevelLastChange    DateAndTime,
    syncEthernetDpllSelectedReferenceClock          OCTET STRING,
    syncEthernetDpllSelectedReferenceClockChange    DateAndTime
}

syncEthernetDpllModuleId OBJECT-TYPE
    SYNTAX      Integer32 (0..1)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Synchronization DPLL module index"
    ::= { syncEthernetDpllEntry 1 }

syncEthernetDpllRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Synchronization DPLL rowstatus"
    ::= { syncEthernetDpllEntry 2 }

syncEthernetDpllAdminStatus OBJECT-TYPE
    SYNTAX      INTEGER { up(1), down(2) }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Administrative status of the DPLL"
    ::= { syncEthernetDpllEntry 3 }

syncEthernetDpllReferenceSelection OBJECT-TYPE
    SYNTAX      INTEGER { freerun(1), static(2), g781(3) }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Specify reference selection mode"
    ::= { syncEthernetDpllEntry 4 }

syncEthernetDpllEnableQualityLevel OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Enable reference selection based on quality level
         Only applicable when syncEthernetDpllReferenceSelection equals g781."
    ::= { syncEthernetDpllEntry 5 }

syncEthernetDpllStatusChangeNotify OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Enable DPLL status change notifications"
    ::= { syncEthernetDpllEntry 6 }

syncEthernetDpllReferenceChangeNotify OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Enable reference clock change notifications"
    ::= { syncEthernetDpllEntry 7 }

syncEthernetDpllStatus OBJECT-TYPE
    SYNTAX      INTEGER { freerun(0), locked(1), holdover(2), 
                    refFailure(3) }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "DPLL operational status"
    ::= { syncEthernetDpllEntry 8 }

syncEthernetDpllStatusLastChange OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Time since last DPLL status change"
    ::= { syncEthernetDpllEntry 9 }

syncEthernetDpllSystemQualityLevel OBJECT-TYPE
    SYNTAX      PrvtSyncEthernetQualityLevelType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "System quality level"
    ::= { syncEthernetDpllEntry 10 }

syncEthernetDpllSystemQualityLevelLastChange OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Time since last system quality level change"
    ::= { syncEthernetDpllEntry 11 }

syncEthernetDpllSelectedReferenceClock OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The selected reference clock source"
    ::= { syncEthernetDpllEntry 12 }

syncEthernetDpllSelectedReferenceClockChange OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Time since last reference clock change"
    ::= { syncEthernetDpllEntry 13 }

syncEthernetDpllClkRefTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF SyncEthernetDpllClkRefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Synchronization DPLL clock reference table"
    ::= { prvtSyncEthernetMIBObjects 16 }

syncEthernetDpllClkRefEntry OBJECT-TYPE
    SYNTAX      SyncEthernetDpllClkRefEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Synchronization DPLL clock reference entry"
    INDEX       { syncEthernetDpllModuleId, ifIndex }
    ::= { syncEthernetDpllClkRefTable 1 }

SyncEthernetDpllClkRefEntry ::= SEQUENCE {
    syncEthernetDpllClkRefRowStatus     RowStatus,
    syncEthernetDpllClkRefPriority      Unsigned32,
    syncEthernetDpllClkRefLockOut       TruthValue,
    syncEthernetDpllClkRefFailStatus    Integer32
}

syncEthernetDpllClkRefRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Synchronization DPLL clock reference rowstatus"
    ::= { syncEthernetDpllClkRefEntry 2 }

syncEthernetDpllClkRefPriority OBJECT-TYPE
    SYNTAX      Unsigned32 (0..256)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Specify reference clock priority"
    ::= { syncEthernetDpllClkRefEntry 3 }

syncEthernetDpllClkRefLockOut OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Lock reference clock"
    ::= { syncEthernetDpllClkRefEntry 4 }

syncEthernetDpllClkRefFailStatus OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "DPLL reference clock status"
    ::= { syncEthernetDpllClkRefEntry 5 }

syncEthernetInvalidESMC NOTIFICATION-TYPE
    OBJECTS     { syncEthernetClockSourceLastRecvLastError }
    STATUS      current
    DESCRIPTION 
        "Invalid ESMC has been received."
    ::= { prvtSyncEthernetMIBNotifications 1 }

syncEthernetQualityLevelChange NOTIFICATION-TYPE
    OBJECTS     { syncEthernetClockSourceQuality }
    STATUS      current
    DESCRIPTION 
        "Current value of syncEthernetClockSourceQuality has
         been changed."
    ::= { prvtSyncEthernetMIBNotifications 2 }

syncEthernetInvalidQualityLevelReceived NOTIFICATION-TYPE
    OBJECTS     { syncEthernetClockSourceRecvQualityLevel }
    STATUS      current
    DESCRIPTION 
        "Invalid Quality level equals to QL-INVx has been received."
    ::= { prvtSyncEthernetMIBNotifications 3 }

syncEthernetDPLLReferenceChange NOTIFICATION-TYPE
    OBJECTS     { syncEthernetDpllSelectedReferenceClockChange }
    STATUS      current
    DESCRIPTION 
        "DPLL's reference clock changed."
    ::= { prvtSyncEthernetMIBNotifications 4 }

syncEthernetDPLLChanged NOTIFICATION-TYPE
    OBJECTS     { syncEthernetDpllStatus }
    STATUS      current
    DESCRIPTION 
        "Some of the DPLL's operational status changes."
    ::= { prvtSyncEthernetMIBNotifications 5 }

syncEthernetDPLLLockFailed NOTIFICATION-TYPE
    OBJECTS     { syncEthernetDpllClkRefFailStatus }
    STATUS      current
    DESCRIPTION 
        "If after new Reference selection the DPLL can't
         lock onto it, this will affect the Clock Source
         associated with that reference"
    ::= { prvtSyncEthernetMIBNotifications 6 }

END -- end of module PRVT-SYNC-ETHERNET-MIB.