--File Name : TERRA-DEFINITIONS-MIB
--Date      : Thu Aug 21 10:17:18 EEST 2008
--Author    : Tadas Leskevicius

TERRA-DEFINITIONS-MIB DEFINITIONS ::= BEGIN
    IMPORTS
    TEXTUAL-CONVENTION
        FROM SNMPv2-TC
    terraRoot
        FROM TERRA-SMI
    Unsigned32, MODULE-IDENTITY, Gauge32, Integer32
        FROM SNMPv2-SMI;

    terraDefIdentMib MODULE-IDENTITY
        LAST-UPDATED        "199807280000Z"
        ORGANIZATION        "TERRA Electronics"
        CONTACT-INFO        "design@terraelectronics.com"
        DESCRIPTION         ""

        REVISION            ""
        DESCRIPTION         ""
        ::= { terraRoot 3 }

    --TEXTUAL-CONVENTIONS --
    DefTenthdBm ::= TEXTUAL-CONVENTION
        DISPLAY-HINT        "d-1"
        STATUS              current
        DESCRIPTION         "This data type represents power levels that are
                            normally expressed in dBm. Units are in tenths
                            of a dBm; for example, -5.1 dBm will be represented
                            as -51."
        SYNTAX              Integer32 (-100..200)

    DefTenthVolt ::= TEXTUAL-CONVENTION
        DISPLAY-HINT        "d-1"
        STATUS              current
        DESCRIPTION         "This data type represents voltage levels that
                            are normally expressed in volts. Units are in
                            tenths of a volt; for example, -48.1 volts will
                            be represented as -481."
        SYNTAX              Gauge32

    DefOnOffStatus ::= TEXTUAL-CONVENTION
        STATUS              current
        DESCRIPTION         "An enumerated value that provides a status of
                            a particular hardware or software parameter that
                            usually represent some sort of switch.
                            
                            A value off(1) indicates the switch is off.
                            
                            A value on(2) indicates the switch is on."
        SYNTAX              INTEGER {
                                off( 1 ),
                                on( 2 )
                            }

    DefHundredthNanoMeter ::= TEXTUAL-CONVENTION
        DISPLAY-HINT        "d-2"
        STATUS              current
        DESCRIPTION         "This data type represents wavelength values that
                            are normally expressed in nano meters. Units
                            are in hundredths of a NanoMeter; for example,
                            1550.56 nm will be represented as 155056."
        SYNTAX              Unsigned32

    DefFaultStatus ::= TEXTUAL-CONVENTION
        STATUS              current
        DESCRIPTION         "An enumerated value that provides a fault status
                            of a particular hardware or software parameter
                            that usually represent some sort of condition.
                            
                            A value normal(1) indicates the normal condition.
                            
                            
                            A value fault(2) indicates the fault condition."
        SYNTAX              INTEGER {
                                normal( 1 ),
                                fault( 2 )
                            }

    DefMilliAmp ::= TEXTUAL-CONVENTION
        DISPLAY-HINT        "d-3"
        STATUS              current
        DESCRIPTION         "This data type represents current levels that
                            are normally expressed in amperes. Units are
                            in milliamperes; for example, 2.1 Amperes would
                            be expressed as 2100."
        SYNTAX              Gauge32

    DefTenthAmp ::= TEXTUAL-CONVENTION
        DISPLAY-HINT        "d-1"
        STATUS              current
        DESCRIPTION         "This data type represents current levels that
                            are normally expressed in Amperes. Units are
                            in tenths of a Ampere; for example, 1.1 Amperes
                            will be represented as 11."
        SYNTAX              Gauge32

    DefOnOffControl ::= TEXTUAL-CONVENTION
        STATUS              current
        DESCRIPTION         "An enumerated value that provides a control of
                            a particular hardware or software parameter that
                            usually represent some sort of switch.
                            
                            A SET request with a value off(1) will cause
                            the switch to be shut off.
                            
                            A SET request with a value on(2) will cause the
                            switch to be turned on.
                            
                            A value meaningless(3) will be implemented by
                            the variables that represent a switch with write-only
                            access. A GET request for the value of the write-only
                            variable shall return a value meaningless(3).
                            
                            
                            A SET request with a value meaningless(3) for
                            the variable with write access shall have no
                            effect and no exception is generated.
                            
                            A value may be used by the variables with both
                            read-write and write-only access."
        SYNTAX              INTEGER {
                                off( 1 ),
                                on( 2 ),
                                meaningless( 3 )
                            }

    DefTenthCentigrade ::= TEXTUAL-CONVENTION
        DISPLAY-HINT        "d-1"
        STATUS              current
        DESCRIPTION         "This data type represents temperature values that
                            are normally expressed in Centigrade. Units are
                            in tenths of a Centigrade; for example, -5.1
                            Centigrade will be represented as -51."
        SYNTAX              Gauge32

    DefTenthdBuV ::= TEXTUAL-CONVENTION
        DISPLAY-HINT        "d-1"
        STATUS              current
        DESCRIPTION         "This data type represents power levels that are
                            normally expressed in dBmV. Units are in tenths
                            of a dBmV; for example, -5.1 dBmV will be represented
                            as -51."
        SYNTAX              Integer32 (-100..200)

    DefTenthdB ::= TEXTUAL-CONVENTION
        DISPLAY-HINT        "d-1"
        STATUS              current
        DESCRIPTION         "This data type represents power levels that are
                            normally expressed in dB. Units are in tenths
                            of a dB; for example, -5.1 dB will be represented
                            as -51."
        SYNTAX              Integer32 (-100..200)

    DefStatus ::= TEXTUAL-CONVENTION
        STATUS              current
        DESCRIPTION         "This data type represents base device status (error)
                            bits ( 0 represents normal condition, 1 - represents
                            fault condition)."
        SYNTAX              INTEGER (0..1)

    DefRelayState ::= TEXTUAL-CONVENTION
        STATUS              current
        DESCRIPTION         "Represents relay contact state. A value closed
                            (0) defines closed contact state, value opened
                            (1) - opened state."
        SYNTAX              INTEGER (0..1)



END