TPLINK-DDMSTATUS-MIB DEFINITIONS ::= BEGIN

         IMPORTS
            MODULE-IDENTITY, OBJECT-TYPE
          	  	        FROM SNMPv2-SMI
          	ifIndex
						FROM RFC1213-MIB
			DisplayString
						FROM SNMPv2-TC
			tplinkDdmManageMIBObjects
						FROM TPLINK-DDMMANAGE-MIB;
						
		   		ddmStatus MODULE-IDENTITY  
				    LAST-UPDATED    "200908270000Z"
				    ORGANIZATION    "TPLINK"
				    CONTACT-INFO		"www.tplink.com"
				    DESCRIPTION			"The view of DDM status."
				    REVISION        "200908270000Z"
				    DESCRIPTION			"Initial version of this MIB module."
				    ::= { tplinkDdmManageMIBObjects 7 } 
			 												
				ddmStatusTable OBJECT-TYPE
					SYNTAX SEQUENCE OF DDMStatusEntry
					MAX-ACCESS	not-accessible
					STATUS			current
					DESCRIPTION 
					"A table that is used to view the DDM status for specific ports on the Switch."
					::= { ddmStatus 1 }
				
				ddmStatusEntry OBJECT-TYPE
					SYNTAX			DDMStatusEntry
					MAX-ACCESS	not-accessible
					STATUS			current
					DESCRIPTION 
					"A list of information for every port."	
					INDEX { ifIndex }
					::= { ddmStatusTable 1 }
					
				DDMStatusEntry ::=
				SEQUENCE
				{
                    ddmStatusPort				DisplayString(SIZE(0..255)),
					ddmStatusTemperature		DisplayString(SIZE(0..30)),
					ddmStatusVoltage			DisplayString(SIZE(0..30)),
					ddmStatusBiasCurrent		DisplayString(SIZE(0..30)),
					ddmStatusTxPow				DisplayString(SIZE(0..30)),
					ddmStatusRxPow				DisplayString(SIZE(0..30)),
					ddmStatusDataReady			DisplayString(SIZE(0..30)),
					ddmStatusLossSignal			DisplayString(SIZE(0..30)),
					ddmStatusTxFault			DisplayString(SIZE(0..30))
				}
				         
				ddmStatusPort OBJECT-TYPE
					SYNTAX				DisplayString(SIZE(0..255))
					MAX-ACCESS			read-only
					STATUS				current
					DESCRIPTION
					"This object indicates the port number."
					::= { ddmStatusEntry 1 }

				ddmStatusTemperature OBJECT-TYPE
					SYNTAX 				DisplayString(SIZE(0..30)) 
					MAX-ACCESS			read-only
					STATUS				current
					DESCRIPTION		
					"This object indicates the temperature of the port."
					::= { ddmStatusEntry 2 }
				
				ddmStatusVoltage OBJECT-TYPE
					SYNTAX				DisplayString(SIZE(0..30)) 
					MAX-ACCESS			read-only
					STATUS				current
					DESCRIPTION		
					"This object indicates the voltage of the port."
					::=	{ ddmStatusEntry 3 }
		        
				ddmStatusBiasCurrent OBJECT-TYPE
					SYNTAX 				DisplayString(SIZE(0..30)) 
					MAX-ACCESS			read-only
					STATUS				current
					DESCRIPTION		
					"This object indicates the bias current of the port."
					::= { ddmStatusEntry 4 }
				
				ddmStatusTxPow OBJECT-TYPE
					SYNTAX				DisplayString(SIZE(0..30)) 
					MAX-ACCESS			read-only
					STATUS				current
					DESCRIPTION		
					"This object indicates the tx power of the port."
					::=	{ ddmStatusEntry 5 }

				ddmStatusRxPow OBJECT-TYPE
					SYNTAX				DisplayString(SIZE(0..30))
					MAX-ACCESS			read-only
					STATUS				current
					DESCRIPTION
					"This object indicates the rx power of the port."
					::= { ddmStatusEntry 6 }
						
				ddmStatusDataReady OBJECT-TYPE
					SYNTAX				DisplayString(SIZE(0..30))
					MAX-ACCESS			read-only
					STATUS				current
					DESCRIPTION
					"This object indicates whether SFP is operational or not."
					::= { ddmStatusEntry 7 }

				ddmStatusLossSignal OBJECT-TYPE
					SYNTAX				DisplayString(SIZE(0..30))
					MAX-ACCESS			read-only
					STATUS				current
					DESCRIPTION
					"This object indicates whether local SFP reports signal loss or not."
					::= { ddmStatusEntry 8 }

				ddmStatusTxFault OBJECT-TYPE
					SYNTAX				DisplayString(SIZE(0..30))
					MAX-ACCESS			read-only
					STATUS				current
					DESCRIPTION
					"This object indicates whether remote SFP reports signal loss or not."
					::= { ddmStatusEntry 9 }
													
END