-- ***************************************************************** -- TN-LACP-MIB.mib : TN MPLS-TP private MIB -- -- Copyright (c) 2015 by Transition Networks, Inc. -- All rights reserved. -- -- ***************************************************************** TN-LACP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI TEXTUAL-CONVENTION FROM SNMPv2-TC tnProducts FROM TRANSITION-SMI Counter64 FROM SNMPv2-SMI Unsigned32 FROM SNMPv2-SMI MacAddress FROM SNMPv2-TC TruthValue FROM SNMPv2-TC PortList FROM Q-BRIDGE-MIB TNInterfaceIndex FROM TN-TC TNUnsigned16 FROM TN-TC TNUnsigned8 FROM TN-TC DisplayString FROM SNMPv2-TC ; tnLacpMib MODULE-IDENTITY LAST-UPDATED "201507150000Z" ORGANIZATION "Transition Networks, Inc." CONTACT-INFO "Transition Networks Technical Support 10900 Red Circle Drive Minnetonka, MN 55343 USA Tel: +1-800-526-9267 E-mail: techsupport@transition.com" DESCRIPTION "The mib module for DHCP settings." REVISION "201507150000Z" DESCRIPTION "Initial Revision of this module" ::= { tnProducts 35 } tnLacpConfigPortTable OBJECT-TYPE SYNTAX SEQUENCE OF TNLacpConfigPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table of the LACP port configurations" ::= { tnLacpMib 1 } tnLacpConfigPortEntry OBJECT-TYPE SYNTAX TNLacpConfigPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each port has a set of parameters" INDEX { tnLacpConfigPortInterfaceNo } ::= { tnLacpConfigPortTable 1 } TNLacpConfigPortEntry ::= SEQUENCE { tnLacpConfigPortInterfaceNo TNInterfaceIndex, tnLacpConfigPortDot3adAggrActorAdminMode INTEGER, tnLacpConfigPortDot3adAggrActorKeyMode INTEGER, tnLacpConfigPortDot3adAggrActorAdminKey Unsigned32, tnLacpConfigPortDot3adAggrRole INTEGER, tnLacpConfigPortDot3adAggrTimeout INTEGER, tnLacpConfigPortDot3adAggrPortPriority Unsigned32 } tnLacpConfigPortInterfaceNo OBJECT-TYPE SYNTAX TNInterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Logical interface number." ::= { tnLacpConfigPortEntry 1 } tnLacpConfigPortDot3adAggrActorAdminMode OBJECT-TYPE SYNTAX INTEGER{ disabled (0), enabled (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Control whether port is LACP enabled(1) or disabled(0)." ::= { tnLacpConfigPortEntry 2 } tnLacpConfigPortDot3adAggrActorKeyMode OBJECT-TYPE SYNTAX INTEGER{ auto (0), specific (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Auto setting will set the key as appropriate by the physical link speed, 10Mb = 1, 100Mb = 2, 1Gb = 3. Using the Specific setting, a user-defined value can be entered. Ports with the same Key value can participate in the same aggregation group, while ports with different keys cannot." ::= { tnLacpConfigPortEntry 3 } tnLacpConfigPortDot3adAggrActorAdminKey OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The current administrative value of the Key for the Aggregator. The administrative Key value may differ from the operational Key value for the reasons discussed in 43.6.2. This is a 16-bit, read-write value. The meaning of particular Key values is of local significance" ::= { tnLacpConfigPortEntry 4 } tnLacpConfigPortDot3adAggrRole OBJECT-TYPE SYNTAX INTEGER{ passive (0), active (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Role shows the LACP activity status. The Active(true) will transmit LACP packets each second, while Passive(false) will wait for a LACP packet from a partner" ::= { tnLacpConfigPortEntry 5 } tnLacpConfigPortDot3adAggrTimeout OBJECT-TYPE SYNTAX INTEGER{ slow (0), fast (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Timeout controls the period between BPDU transmissions. Fast(true) will transmit LACP packets each second, while Slow(0) will wait for 30 seconds before sending a LACP packet." ::= { tnLacpConfigPortEntry 6 } tnLacpConfigPortDot3adAggrPortPriority OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The Port Priority controls the priority of the port. If the LACP partner wants to form a larger group than is supported by this device then this parameter will control which ports will be active and which ports will be in a backup role. Lower number means greater priority." ::= { tnLacpConfigPortEntry 7 } tnLacpStatusSystemTable OBJECT-TYPE SYNTAX SEQUENCE OF TNLacpStatusSystemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table of the LACP system status" ::= { tnLacpMib 2 } tnLacpStatusSystemEntry OBJECT-TYPE SYNTAX TNLacpStatusSystemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each lag has a set of parameters" INDEX { tnLacpStatusSystemDot3adAggrID } ::= { tnLacpStatusSystemTable 1 } TNLacpStatusSystemEntry ::= SEQUENCE { tnLacpStatusSystemDot3adAggrID DisplayString, tnLacpStatusSystemDot3adAggrPartnerSystemID MacAddress, tnLacpStatusSystemDot3adAggrPartnerOperKey TNUnsigned16, tnLacpStatusSystemDot3adAggrPartnerOperSystemPriority TNUnsigned16, tnLacpStatusSystemDot3adAggrPartnerStateLastChanged Unsigned32, tnLacpStatusSystemDot3adAggrLocalPorts PortList } tnLacpStatusSystemDot3adAggrID OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The aggregation ID for a particular link aggregation group." ::= { tnLacpStatusSystemEntry 1 } tnLacpStatusSystemDot3adAggrPartnerSystemID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The system ID (MAC address) of the aggregation partner." ::= { tnLacpStatusSystemEntry 2 } tnLacpStatusSystemDot3adAggrPartnerOperKey OBJECT-TYPE SYNTAX TNUnsigned16 MAX-ACCESS read-only STATUS current DESCRIPTION "The Key that the partner has assigned to this aggregation ID." ::= { tnLacpStatusSystemEntry 3 } tnLacpStatusSystemDot3adAggrPartnerOperSystemPriority OBJECT-TYPE SYNTAX TNUnsigned16 MAX-ACCESS read-only STATUS current DESCRIPTION "A 2-octet read-only value indicating the operational value of priority associated with the Partner's System ID. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminSystemPriority if there is no protocol Partner." ::= { tnLacpStatusSystemEntry 4 } tnLacpStatusSystemDot3adAggrPartnerStateLastChanged OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time in second since this aggregation changed" ::= { tnLacpStatusSystemEntry 5 } tnLacpStatusSystemDot3adAggrLocalPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "Local port list" ::= { tnLacpStatusSystemEntry 6 } tnLacpStatusPortTable OBJECT-TYPE SYNTAX SEQUENCE OF TNLacpStatusPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table of the LACP port status" ::= { tnLacpMib 3 } tnLacpStatusPortEntry OBJECT-TYPE SYNTAX TNLacpStatusPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each port has a set of parameters" INDEX { tnLacpStatusPortInterfaceNo } ::= { tnLacpStatusPortTable 1 } TNLacpStatusPortEntry ::= SEQUENCE { tnLacpStatusPortInterfaceNo TNInterfaceIndex, tnLacpStatusPortDot3adAggrActorAdminMode INTEGER, tnLacpStatusPortDot3adAggrActorAdminKey INTEGER, tnLacpStatusPortDot3adAggrActorID DisplayString, tnLacpStatusPortDot3adAggrPartnerSystemID MacAddress, tnLacpStatusPortDot3adAggrPartnerOperPortIndex INTEGER, tnLacpStatusPortDot3adAggrPartnerOperPortPriority TNUnsigned16 } tnLacpStatusPortInterfaceNo OBJECT-TYPE SYNTAX TNInterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Logical interface number." ::= { tnLacpStatusPortEntry 1 } tnLacpStatusPortDot3adAggrActorAdminMode OBJECT-TYPE SYNTAX INTEGER{ no (0), yes (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the current Admin mode of port, if LACP enabled then returns true else returns false." ::= { tnLacpStatusPortEntry 2 } tnLacpStatusPortDot3adAggrActorAdminKey OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the current administrative value of the Key for the Aggregator. The administrative Key value may differ from the operational Key value for the reasons discussed in 43.6.2. This is a 16-bit, read-write value. The meaning of particular Key values is of local significance" ::= { tnLacpStatusPortEntry 3 } tnLacpStatusPortDot3adAggrActorID OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Aggregation ID assigned to this aggregation group." ::= { tnLacpStatusPortEntry 4 } tnLacpStatusPortDot3adAggrPartnerSystemID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The system ID (MAC address) of the aggregation partner." ::= { tnLacpStatusPortEntry 5 } tnLacpStatusPortDot3adAggrPartnerOperPortIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the port index of the partner port connected to this port." ::= { tnLacpStatusPortEntry 6 } tnLacpStatusPortDot3adAggrPartnerOperPortPriority OBJECT-TYPE SYNTAX TNUnsigned16 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the port priority of the port partner port connected to this port." ::= { tnLacpStatusPortEntry 7 } tnLacpStatisticsPortTable OBJECT-TYPE SYNTAX SEQUENCE OF TNLacpStatisticsPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table of the LACP port statistics" ::= { tnLacpMib 4 } tnLacpStatisticsPortEntry OBJECT-TYPE SYNTAX TNLacpStatisticsPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each port has a set of parameters" INDEX { tnLacpStatisticsPortInterfaceNo } ::= { tnLacpStatisticsPortTable 1 } TNLacpStatisticsPortEntry ::= SEQUENCE { tnLacpStatisticsPortInterfaceNo TNInterfaceIndex, tnLacpStatisticsPortDot3adAggrRxFrames Unsigned32, tnLacpStatisticsPortDot3adAggrTxFrames Unsigned32, tnLacpStatisticsPortDot3adAggrRxUnknownFrames Unsigned32, tnLacpStatisticsPortDot3adAggrRxIllegalFrames Unsigned32 } tnLacpStatisticsPortInterfaceNo OBJECT-TYPE SYNTAX TNInterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Logical interface number." ::= { tnLacpStatisticsPortEntry 1 } tnLacpStatisticsPortDot3adAggrRxFrames OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows received LACP frame count." ::= { tnLacpStatisticsPortEntry 2 } tnLacpStatisticsPortDot3adAggrTxFrames OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows transmitted LACP frame count." ::= { tnLacpStatisticsPortEntry 3 } tnLacpStatisticsPortDot3adAggrRxUnknownFrames OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows recevied unknown LACP frame count." ::= { tnLacpStatisticsPortEntry 4 } tnLacpStatisticsPortDot3adAggrRxIllegalFrames OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows recevied illegal LACP frame count." ::= { tnLacpStatisticsPortEntry 5 } END