-- ***************************************************************** -- TN-MAC-MIB.my : TN MAC TABLE MIB -- -- Copyright (c) 2013 by Transition Networks, Inc. -- All rights reserved. -- -- ************************************************************************************************* TN-MAC-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, Unsigned32, Integer32 FROM SNMPv2-SMI RowStatus, TruthValue, MacAddress FROM SNMPv2-TC -- [RFC2579] PortList, VlanId FROM Q-BRIDGE-MIB ifIndex FROM IF-MIB tnProducts FROM TRANSITION-SMI; tnMacMib MODULE-IDENTITY LAST-UPDATED "201306180000Z" ORGANIZATION "Transition Networks, Inc." CONTACT-INFO "Transition Networks Technical Support 10900 Red Circle Drive Minnetonka, MN 55343 USA Tel: +1-800-526-9267 E-mail: techsupport@transition.com " DESCRIPTION "The mib module for managing configuration of MAC. " ::= { tnProducts 142 } -- -- main body -- tnMacMibNotifications OBJECT IDENTIFIER ::= { tnMacMib 0 } tnMacMibObjects OBJECT IDENTIFIER ::= { tnMacMib 1 } tnMacMibConformance OBJECT IDENTIFIER ::= { tnMacMib 2 } --Aging Configuration tnMacAgeAutomaticConfig OBJECT IDENTIFIER ::= { tnMacMibObjects 1 } tnMacAgeAutomaticAgingDisable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Disable the automatic aging of dynamic entries." ::= { tnMacAgeAutomaticConfig 1 } tnMacAgeAutomaticAgingTime OBJECT-TYPE SYNTAX Integer32(10..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure aging time by entering a value here in seconds. The allowed range is 10 to 1000000 seconds. " ::= { tnMacAgeAutomaticConfig 2 } -- MAC Table Learning tnMacLearningTable OBJECT-TYPE SYNTAX SEQUENCE OF TnMacLearningEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table displays MAC table learning." ::= { tnMacMibObjects 2 } tnMacLearningEntry OBJECT-TYPE SYNTAX TnMacLearningEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry represents MAC table learning in each port." INDEX { ifIndex } ::= { tnMacLearningTable 1 } TnMacLearningEntry ::= SEQUENCE { tnMacTablePortLearning INTEGER } tnMacTablePortLearning OBJECT-TYPE SYNTAX INTEGER { auto(1), disable(2), secure(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "If the learning mode for a given port is greyed out, another module is in control of the mode, so that it cannot be changed by the user. An example of such a module is the MAC-Based Authentication under 802.1X. Each port can do learning based upon the following settings: Auto Learning is done automatically as soon as a frame with unknown SMAC is received. Disable No learning is done. Secure Only static MAC entries are learned, all other frames are dropped. Note: Make sure that the link used for managing the switch is added to the Static Mac Table before changing to secure learning mode, otherwise the management link is lost and can only be restored by using another non-secure port or by connecting to the switch via the serial interface. " ::= { tnMacLearningEntry 1 } -- Static MAC Table Configuration tnMacStaticConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF TnMacStaticConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The static entries in the MAC table are shown in this table. The static MAC table can contain 64 entries." ::= { tnMacMibObjects 3 } tnMacStaticConfigEntry OBJECT-TYPE SYNTAX TnMacStaticConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The static entries in the MAC table are shown in this table." INDEX { tnStaticMacVlanId, tnStaticMacAddress } ::= { tnMacStaticConfigTable 1 } TnMacStaticConfigEntry ::= SEQUENCE { tnStaticMacVlanId VlanId, tnStaticMacAddress MacAddress, tnStaticMacPortMembers PortList, tnStaticMacStatus RowStatus } tnStaticMacVlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VLAN ID of the entry." ::= { tnMacStaticConfigEntry 1 } tnStaticMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MAC address of the entry." ::= { tnMacStaticConfigEntry 2 } tnStaticMacPortMembers OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "Checkmarks indicate which ports are members of the entry. Check or uncheck as needed to modify the entry." ::= { tnMacStaticConfigEntry 3 } tnStaticMacStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated. " ::= { tnMacStaticConfigEntry 4 } -- MAC Address Table tnMacAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF TnMacAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Navigating the MAC Table." ::= { tnMacMibObjects 4 } tnMacAddressEntry OBJECT-TYPE SYNTAX TnMacAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entriy represents a MAC address." INDEX { tnMacType, tnMacVlan, tnMacAddress } ::= { tnMacAddressTable 1 } TnMacAddressEntry ::= SEQUENCE { tnMacType INTEGER, tnMacVlan VlanId, tnMacAddress MacAddress, tnMacPortMembers PortList } tnMacType OBJECT-TYPE SYNTAX INTEGER { static(1), dynamic(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates whether the entry is a static or a dynamic entry. " ::= { tnMacAddressEntry 1 } tnMacVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VLAN ID of the entry. " ::= { tnMacAddressEntry 2 } tnMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MAC address of the entry. " ::= { tnMacAddressEntry 3 } tnMacPortMembers OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "The ports that are members of the entry. The value of this object in high 8 bits describe the status from the first port to last port. In low 8 bits, the valus of first bit is the status of port mgmt, while the second is the status of port cpu, the default value of other bits are zero. " ::= { tnMacAddressEntry 4 } tnMacDynamicClear OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Flush all dynamic entries if the value is true. " ::= { tnMacMibObjects 5 } END