-- *****************************************************************
-- TN-PROV-MIB.my : TN Provision(backup/restore) MIB
--
-- Copyright (c) 2009 by Transition Networks, Inc.
-- All rights reserved.
--
-- *****************************************************************
TN-PROV-MIB DEFINITIONS ::= BEGIN

IMPORTS
    DisplayString
                FROM SNMPv2-TC
    MODULE-IDENTITY,
    NOTIFICATION-TYPE,
    OBJECT-TYPE,
    Unsigned32
        FROM SNMPv2-SMI
    entPhysicalIndex FROM ENTITY-MIB
    InetAddressType,InetAddress 
        FROM INET-ADDRESS-MIB
    MODULE-COMPLIANCE,
    OBJECT-GROUP,
    NOTIFICATION-GROUP
        FROM SNMPv2-CONF
    tnProducts
        FROM TRANSITION-SMI;

tnProvMIB MODULE-IDENTITY
    LAST-UPDATED    "201204051930Z"
    ORGANIZATION    "Transition Networks, Inc."
    CONTACT-INFO
            "Transition Networks
                  Technical Support

                  10900 Red Circle Drive
                  Minnetonka, MN 55343 USA
                  Tel: +1-800-526-9267

                  E-mail: techsupport@transition.com"
    DESCRIPTION
        "The mib for configuration backup and restore of the device."
    REVISION        "201204200000Z"
    DESCRIPTION
        "Initial version of this MIB module."
    ::= { tnProducts 110 }

tnProvObjects  OBJECT IDENTIFIER
    ::= { tnProvMIB 1 }

tnProvGroup       OBJECT IDENTIFIER ::= { tnProvObjects 1 }

tnProvTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF TnProvEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table displays and sets backup/restore configuration of
         individual device."
    ::= { tnProvGroup 1 }

tnProvEntry OBJECT-TYPE
    SYNTAX          TnProvEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This entry represents a provision configuration of individual
        device."
    INDEX           { entPhysicalIndex }
    ::= { tnProvTable 1 }

TnProvEntry ::= SEQUENCE {
        tnProvType                    INTEGER,
        tnProvAddrType                InetAddressType,
        tnProvAddr                    InetAddress,
        tnProvFile                    DisplayString,
        tnProvDstFile                 DisplayString,
        tnProvOper                    INTEGER,
        tnProvResult                  INTEGER
}

tnProvType    OBJECT-TYPE
    SYNTAX     INTEGER {
                  backup(1),
                  restore(2),
                  saveStartupConfig(3),
                  activate(4),
                  delete(5)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "Provision operation type:
         backup/download(1) : backup/download the configuration of the device.
         restore/upload(2) : restore/upload the configuration onto the device.
         saveStartupConfig(3) : copies running-config to startup-config, thereby ensuring
                                that the currently active configuration will be used at
                                the next reboot.
         activate(4) : It is possible to activate any of the configuration files present
                       on the switch, except for running-config which represents the
                       currently active configuration.
         delete(5) : It is possible to delete any of the writable files stored in flash,
                     including startup-config. If this is done and the switch is rebooted
                     without a prior Save operation, this effectively resets the switch
                     to default configuration. running-config and default-config cannot be
                     deleted.
        "
    ::= { tnProvEntry 1 }

tnProvAddrType  OBJECT-TYPE
    SYNTAX          InetAddressType
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "The target device IP address type. "
    ::= { tnProvEntry 2 }
    
tnProvAddr  OBJECT-TYPE
    SYNTAX          InetAddress
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "The target device IP address. "
    ::= { tnProvEntry 3 }

tnProvFile  OBJECT-TYPE
    SYNTAX          DisplayString 
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "tnProvFile is used to specify the configuration file. This field is used in combination with tnProvType as below:

         For Download/backup(1), source file name on the switch.
         For Upload/restore(2),  source file name on the ftp server.
         For saveStartupConfig(3), it is ignored.
         For activate(4), it is the file on the switch to be actiavted (except running-config file).
         For delete(5), it is the file wname to be delete from the switch.
        "
    ::= { tnProvEntry 4 }


    

tnProvOper    OBJECT-TYPE
    SYNTAX     INTEGER { start(1), doNothing(2) }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "Provision operation type:
         start(1) : start provision operation.
         doNothing(2) : just read value.
         tnProvOper should be the last object to be set for the operation.
         That means when you set it to 'start', the operation specified in tnProvType will
         be triggerd. "
    ::= { tnProvEntry 5 }

tnProvResult    OBJECT-TYPE
    SYNTAX     INTEGER { success(1), fail(2), inProgress(3) }
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "Provision operation type:
         success(1) : provision process succeeded.
         fail(2) : provision process failed.
         inProgress(3): provision is in progress.
        "
    ::= { tnProvEntry 6 }

tnProvDstFile  OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "tnProvDstFile specifies the target file name.
         For Download/backup(1), destination file name on the ftp server.
         For Upload/restore(2),  destination file name on the switch.
         For saveStartupConfig(3), it is ignored.
         For activate(4), it is ignored.
         For delete(5), it is ignored.
        "
    ::= { tnProvEntry 7 }
END