-- ***************************************************************** -- TN-PROTECTION-MIB.my : TN Ethernet Protection MIB -- -- april 2012, Tony Lei -- -- Copyright (c) 2012 by TN, Inc. -- -- All rights reserved. -- ***************************************************************** TN-XSTP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF TEXTUAL-CONVENTION, TruthValue, RowStatus, DisplayString FROM SNMPv2-TC IEEE8021PbbComponentIdentifier, IEEE8021BridgePortNumber FROM IEEE8021-TC-MIB ieee8021MstpEntry, ieee8021MstpCistEntry, ieee8021MstpCistPortEntry, ieee8021MstpPortEntry FROM IEEE8021-MSTP-MIB tnProducts FROM TRANSITION-SMI; tnXSTPMIB MODULE-IDENTITY LAST-UPDATED "201207061930Z" ORGANIZATION "Transition Networks, Inc." CONTACT-INFO "Transition Networks Technical Support 10900 Red Circle Drive Minnetonka, MN 55343 USA Tel: +1-800-526-9267 E-mail: techsupport@transition.com" DESCRIPTION "TBD" REVISION "201204200000Z" DESCRIPTION "Initial version of this MIB module." ::= { tnProducts 111 } tnXSTPMIBNotifications OBJECT IDENTIFIER ::= { tnXSTPMIB 1 } tnXSTPMgmtObjects OBJECT IDENTIFIER ::= { tnXSTPMIB 2 } tnXSTPMIBConformance OBJECT IDENTIFIER ::= { tnXSTPMIB 3 } --cist table tnExtMstpCistTable OBJECT-TYPE SYNTAX SEQUENCE OF TnExtMstpCistEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Common and Internal Spanning Tree (CIST) Table. Each row in the table represents information regarding a Bridge's Bridge Protocol Entity for the CIST." ::= { tnXSTPMgmtObjects 1} tnExtMstpCistEntry OBJECT-TYPE SYNTAX TnExtMstpCistEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A extension MSTP Cist Table entry" AUGMENTS { ieee8021MstpCistEntry } ::= { tnExtMstpCistTable 1 } TnExtMstpCistEntry ::= SEQUENCE { tnExtMstpCistBpduFiltering TruthValue, tnExtMstpCistBpduGuard TruthValue, tnExtMstpCistRecoveryTimeout Integer32 } tnExtMstpCistBpduFiltering OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object control whether a port explicitly configured as Edge will transmit and receive BPDUs" ::= { tnExtMstpCistEntry 1 } tnExtMstpCistBpduGuard OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object control whether a port explicitly configured as Edge will disable itself upon reception of a BPDU.The port will enter the error-disabled state, and will be removed from the active topology." ::= { tnExtMstpCistEntry 2 } tnExtMstpCistRecoveryTimeout OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The time to pass before a port in the error-disabled state can be enabled. Valid values are between 30 and 86400 seconds (24 hours). And 0 means disabled" ::= { tnExtMstpCistEntry 3 } -- MSTP table tnExtMstpTable OBJECT-TYPE SYNTAX SEQUENCE OF TnExtMstpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "In an MSTP Bridge, the MSTP Table. Each row in the Table represents information regarding a Bridge's Bridge Protocol Entity for the specified Spanning Tree instance." ::= { tnXSTPMgmtObjects 2 } tnExtMstpEntry OBJECT-TYPE SYNTAX TnExtMstpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A extension MSTP Table entry." AUGMENTS { ieee8021MstpEntry } ::= { tnExtMstpTable 1 } TnExtMstpEntry ::= SEQUENCE { tnExtMstpVids0 OCTET STRING, tnExtMstpVids1 OCTET STRING, tnExtMstpVids2 OCTET STRING, tnExtMstpVids3 OCTET STRING } tnExtMstpVids0 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(128)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object contains the first 1024 bits of the 4096 bit vector indicating which VIDs are assigned to this MSTID. The high order bit of the first octet corresponds to the first bit of the vector, while the low order bit of the last octet corresponds to the last bit of this portion of the vector. A bit that is on (equal to 1) indicates that the corresponding VID is assigned to this MSTID." ::= { tnExtMstpEntry 1 } tnExtMstpVids1 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(128)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object contains the second 1024 bits of the 4096 bit vector indicating which VIDs are assigned to this MSTID. The high order bit of the first octet corresponds to the first bit of this portion of the vector, while the low order bit of the last octet corresponds to the last bit of this portion of the vector. A bit that is on (equal to 1) indicates that the corresponding VID is assigned to this MSTID." ::= { tnExtMstpEntry 2 } tnExtMstpVids2 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(128)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object contains the third 1024 bits of the 4096 bit vector indicating which VIDs are assigned to this MSTID. The high order bit of the first octet corresponds to the first bit of this portion of the vector, while the low order bit of the last octet corresponds to the last bit of this portion of the vector. A bit that is on (equal to 1) indicates that the corresponding VID is assigned to this MSTID." ::= { tnExtMstpEntry 3 } tnExtMstpVids3 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(128)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object contains the fourth 1024 bits of the 4096 bit vector indicating which VIDs are assigned to this MSTID. The high order bit of the first octet corresponds to the first bit of this portion of the vector, while the low order bit of the last octet corresponds to the last bit of this portion of the vector. A bit that is on (equal to 1) indicates that the corresponding VID is assigned to this MSTID." ::= { tnExtMstpEntry 4 } -- MSTP cist port table tnExtMstpCistPortTable OBJECT-TYPE SYNTAX SEQUENCE OF TnExtMstpCistPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The CIST Port Table. Each row in the Table represents information regarding a specific Port within the Bridge's Bridge Protocol Entity, for the CIST." ::= { tnXSTPMgmtObjects 3 } tnExtMstpCistPortEntry OBJECT-TYPE SYNTAX TnExtMstpCistPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A extension MSTP Cist Port Table entry." AUGMENTS { ieee8021MstpCistPortEntry } ::= { tnExtMstpCistPortTable 1 } TnExtMstpCistPortEntry ::= SEQUENCE { tnExtMstpCistPortBpduGuard TruthValue, tnExtMstpCistPortAutoEdge TruthValue, } tnExtMstpCistPortBpduGuard OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If enabled, causes the port to disable itself upon receiving valid BPDU's. Contrary to the similar bridge setting, the port Edge status does not effect this setting. A port entering error-disabled state due to this setting is subject to the bridge Port Error Recovery setting as well." ::= { tnExtMstpCistPortEntry 1 } tnExtMstpCistPortAutoEdge OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Controls whether the bridge should enable automatic edge detection on the bridge port. This allows operEdge to be derived from whether BPDU's are received on the port or not." ::= { tnExtMstpCistPortEntry 2 } -- MSTP port table tnExtMstpPortTable OBJECT-TYPE SYNTAX SEQUENCE OF TnExtMstpPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MSTP Port Table. Each row in the Table represents information regarding a specific Port within the Bridge's Bridge Protocol Entity, for a given MSTI. The values of all writable objects in this table MUST be retained across reinitializations of the management system. Note that entries will exist in this table only for bridge components for which the corresponding instance of ieee8021SpanningTreeVersion (from the IEEE8021-SPANNING-TREE-MIB) has a value of mstp(2)" ::= { tnXSTPMgmtObjects 4 } tnExtMstpPortEntry OBJECT-TYPE SYNTAX TnExtMstpPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A extension MSTP Port Table entry" AUGMENTS { ieee8021MstpPortEntry } ::= { tnExtMstpPortTable 1 } TnExtMstpPortEntry ::= SEQUENCE { tnExtMstpPortAdminPathCost Integer32 } tnExtMstpPortAdminPathCost OBJECT-TYPE SYNTAX Integer32 (0..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION "The administratively assigned value for the contribution of this port to the path cost of paths toward the spanning tree root. Writing a value of '0' assigns the automatically calculated default Path Cost value to the port. If the default Path Cost is being used, this object returns '0' when read." ::= { tnExtMstpPortEntry 1 } -- ============================================================= -- tnMSTPPortStatsTable: -- ============================================================= tnXstpPortStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF TnXstpPortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The STP Port statistics Table." ::= { tnXSTPMgmtObjects 5 } tnXstpPortStatsEntry OBJECT-TYPE SYNTAX TnXstpPortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A XSTP port statistics Table entry." INDEX { tnXstpPortStatsComponentId , tnXstpPortStatsPort } ::= { tnXstpPortStatsTable 1 } TnXstpPortStatsEntry ::= SEQUENCE { tnXstpPortStatsComponentId IEEE8021PbbComponentIdentifier, tnXstpPortStatsPort IEEE8021BridgePortNumber, tnXstpPortStatsMstpTx Integer32, tnXstpPortStatsRstpTx Integer32, tnXstpPortStatsStpTx Integer32, tnXstpPortStatsTcnTx Integer32, tnXstpPortStatsMstpRx Integer32, tnXstpPortStatsRstpRx Integer32, tnXstpPortStatsStpRx Integer32, tnXstpPortStatsTcnRx Integer32, tnXstpPortStatsUnknown Integer32, tnXstpPortStatsLllegal Integer32, tnXstpPortStatsClear TruthValue } tnXstpPortStatsComponentId OBJECT-TYPE SYNTAX IEEE8021PbbComponentIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "The component identifier is used to distinguish between the multiple virtual bridge instances within a PBB. In simple situations where there is only a single component the default value is 1" ::= { tnXstpPortStatsEntry 1 } tnXstpPortStatsPort OBJECT-TYPE SYNTAX IEEE8021BridgePortNumber MAX-ACCESS not-accessible STATUS current DESCRIPTION "The port number of the port for which this entry contains Spanning Tree Protocol management information. " ::= { tnXstpPortStatsEntry 2 } tnXstpPortStatsMstpTx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MSTP Configuration BPDU's transmitted on the port." ::= { tnXstpPortStatsEntry 3 } tnXstpPortStatsRstpTx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RSTP Configuration BPDU's transmitted on the port." ::= { tnXstpPortStatsEntry 4 } tnXstpPortStatsStpTx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of STP Configuration BPDU's transmitted on the port." ::= { tnXstpPortStatsEntry 5 } tnXstpPortStatsTcnTx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of TCN Configuration BPDU's transmitted on the port." ::= { tnXstpPortStatsEntry 6 } tnXstpPortStatsMstpRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MSTP Configuration BPDU's received on the port." ::= { tnXstpPortStatsEntry 7 } tnXstpPortStatsRstpRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RSTP Configuration BPDU's received on the port." ::= { tnXstpPortStatsEntry 8 } tnXstpPortStatsStpRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of STP Configuration BPDU's received on the port." ::= { tnXstpPortStatsEntry 9 } tnXstpPortStatsTcnRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of TCN Configuration BPDU's received on the port." ::= { tnXstpPortStatsEntry 10 } tnXstpPortStatsUnknown OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of unkown BPDU's received on the port." ::= { tnXstpPortStatsEntry 11 } tnXstpPortStatsLllegal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of lllegal BPDU's received on the port." ::= { tnXstpPortStatsEntry 12 } tnXstpPortStatsClear OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Clear the stats" ::= { tnXstpPortStatsEntry 13 } END