-- ***************************************************************** -- UBQS-ENVMON-MIB: Ubiquoss Environmental Monitor MIB file -- -- June 2009 by Hyung Eun Park -- -- Copyright (c) 2009 by Ubiquoss, Corp. -- All rights reserved. -- ***************************************************************** -- UBQS-ENVMON-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Gauge32, Integer32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, DisplayString, TruthValue FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF ubiMgmtv2 FROM UBQS-SMI; ubiEnvMonMIB MODULE-IDENTITY LAST-UPDATED "200906250000Z" ORGANIZATION "Ubiquoss Corp." CONTACT-INFO " Ubiquoss Customer Service Postal: 24F Milennium B/D, 467-12, Dogok-Dong, GangNam-Gu, Seoul 135-270 Korea Tel: 82-2-2190-3100" DESCRIPTION "The UBQS-ENVMON-MIB is used for getting the environment information of the system." ::= { ubiMgmtv2 2 } -- ***************************************************************** -- Type Convention -- ***************************************************************** UbiEnvMonState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the state of a device being monitored. Valid values are: normal(1): the environment is good, such as low temperature. warning(2): the environment is bad, such as temperature above normal operation range but not too high. critical(3): the environment is very bad, such as temperature much higher than normal operation limit. shutdown(4): the environment is the worst, the system should be shutdown immediately. notPresent(5): the environmental monitor is not present, such as temperature sensors do not exist. notFunctioning(6): the environmental monitor does not function properly. " SYNTAX INTEGER { normal(1), warning(2), critical(3), shutdown(4), notPresent(5), notFunctioning(6) } -- ***************************************************************** -- ubiEnvMonMIB -- ***************************************************************** ubiEnvMonObjects OBJECT IDENTIFIER ::= { ubiEnvMonMIB 1 } ubiEnvMonMIBNotificationEnables OBJECT IDENTIFIER ::= { ubiEnvMonMIB 2 } ubiEnvMonMIBNotificationPrefix OBJECT IDENTIFIER ::= { ubiEnvMonMIB 3 } ubiEnvMonMIBConformance OBJECT IDENTIFIER ::= { ubiEnvMonMIB 4 } -- ***************************************************************** -- ubiEnvMonTemperatureTable -- ***************************************************************** ubiEnvMonTemperatureTable OBJECT-TYPE SYNTAX SEQUENCE OF UbiEnvMonTemperatureEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of ambient temperature status maintained by the environmental monitor." ::= { ubiEnvMonObjects 1 } ubiEnvMonTemperatureEntry OBJECT-TYPE SYNTAX UbiEnvMonTemperatureEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the ambient temperature status table, representing the status of the associated testpoint maintained by the environmental monitor." INDEX { ubiEnvMonTemperatureIndex } ::= { ubiEnvMonTemperatureTable 1 } UbiEnvMonTemperatureEntry ::= SEQUENCE { ubiEnvMonTemperatureIndex Integer32, ubiEnvMonTemperatureDescr DisplayString, ubiEnvMonTemperatureValue Gauge32, ubiEnvMonTemperatureHighThreshold Integer32, ubiEnvMonTemperatureLowThreshold Integer32, -- ubiEnvMonTemperatureLastShutdown Integer32, ubiEnvMonTemperatureState UbiEnvMonState } ubiEnvMonTemperatureIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique index for the testpoint being instrumented. This index is for SNMP purposes only, and has no intrinsic meaning." ::= { ubiEnvMonTemperatureEntry 1 } ubiEnvMonTemperatureDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Textual description of the testpoint being instrumented." ::= { ubiEnvMonTemperatureEntry 2 } ubiEnvMonTemperatureValue OBJECT-TYPE SYNTAX Gauge32 UNITS "degrees Celsius" MAX-ACCESS read-only STATUS current DESCRIPTION "The current measurement of the testpoint being instrumented." ::= { ubiEnvMonTemperatureEntry 3 } ubiEnvMonTemperatureHighThreshold OBJECT-TYPE SYNTAX Integer32 UNITS "degrees Celsius" MAX-ACCESS read-write STATUS current DESCRIPTION "A high threshold for the temperature. If a particular value isn't set, this object displays the default value." ::= { ubiEnvMonTemperatureEntry 4 } ubiEnvMonTemperatureLowThreshold OBJECT-TYPE SYNTAX Integer32 UNITS "degrees Celsius" MAX-ACCESS read-write STATUS current DESCRIPTION "A low threshold for the temperature. If a particular value isn't set, this object displays the default value." ::= { ubiEnvMonTemperatureEntry 5 } -- ubiEnvMonTemperatureLastShutdown OBJECT-TYPE -- SYNTAX Integer32 -- UNITS "degrees Celsius" -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The value of the associated instance of the object -- ubiEnvMonTemperatureStatusValue at the time an emergency -- shutdown of the managed device was last initiated. " -- ::= { ubiEnvMonTemperatureEntry 5 } ubiEnvMonTemperatureState OBJECT-TYPE SYNTAX UbiEnvMonState MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the testpoint being instrumented. Represents the temperature state of a device being monitored. Valid values are: normal(1): the environment is good, such as low temperature. warning(2): the environment is bad, such as temperature above normal operation range but not too high. critical(3): the environment is very bad, such as temperature much higher than normal operation limit. notPresent(5): the environmental monitor is not present, such as temperature sensors do not exist. " ::= { ubiEnvMonTemperatureEntry 6 } -- ***************************************************************** -- ubiEnvMonFanTable -- **************************************************************** ubiEnvMonFanTable OBJECT-TYPE SYNTAX SEQUENCE OF UbiEnvMonFanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of fan status maintained by the environmental monitor." ::= { ubiEnvMonObjects 2 } ubiEnvMonFanEntry OBJECT-TYPE SYNTAX UbiEnvMonFanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the fan status table, representing the status of the associated fan maintained by the environmental monitor." INDEX { ubiEnvMonFanIndex } ::= { ubiEnvMonFanTable 1 } UbiEnvMonFanEntry ::= SEQUENCE { ubiEnvMonFanIndex Integer32, ubiEnvMonFanDescr DisplayString, ubiEnvMonFanState UbiEnvMonState } ubiEnvMonFanIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique index for the fan being instrumented. This index is for SNMP purposes only, and has no intrinsic meaning." ::= { ubiEnvMonFanEntry 1 } ubiEnvMonFanDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Textual description of the fan being instrumented." ::= { ubiEnvMonFanEntry 2 } ubiEnvMonFanState OBJECT-TYPE SYNTAX UbiEnvMonState MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the fan being instrumented. Represents the fan state of a device being monitored. Valid values are: normal(1): the environment is good, such as low temperature. notPresent(5): the environmental monitor is not present, such as temperature sensors do not exist. notFunctioning(6): the environmental monitor does not function properly. " ::= { ubiEnvMonFanEntry 3 } -- ***************************************************************** -- ubiEnvMonSupplyTable -- **************************************************************** ubiEnvMonSupplyTable OBJECT-TYPE SYNTAX SEQUENCE OF UbiEnvMonSupplyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of power supply status maintained by the environmental monitor card." ::= { ubiEnvMonObjects 3 } ubiEnvMonSupplyEntry OBJECT-TYPE SYNTAX UbiEnvMonSupplyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the power supply status table, representing the status of the associated power supply maintained by the environmental monitor card." INDEX { ubiEnvMonSupplyIndex } ::= { ubiEnvMonSupplyTable 1 } UbiEnvMonSupplyEntry ::= SEQUENCE { ubiEnvMonSupplyIndex Integer32, ubiEnvMonSupplyDescr DisplayString, ubiEnvMonSupplyState UbiEnvMonState, ubiEnvMonSupplySource INTEGER, ubiEnvMonExternalAlarmAc INTEGER, ubiEnvMonExternalAlarmUnit INTEGER } ubiEnvMonSupplyIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique index for the power supply being instrumented. This index is for SNMP purposes only, and has no intrinsic meaning." ::= { ubiEnvMonSupplyEntry 1 } ubiEnvMonSupplyDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Textual description of the power supply being instrumented." ::= { ubiEnvMonSupplyEntry 2 } ubiEnvMonSupplyState OBJECT-TYPE SYNTAX UbiEnvMonState MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the power supply being instrumented. Represents the power state of a device being monitored. Valid values are: normal(1): the environment is good, such as low temperature. notPresent(5): the environmental monitor is not present, such as temperature sensors do not exist. notFunctioning(6): the environmental monitor does not function properly. " ::= { ubiEnvMonSupplyEntry 3 } ubiEnvMonSupplySource OBJECT-TYPE SYNTAX INTEGER { none(0), ac(1), dc(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The power supply source. ac - AC power supply dc - DC power supply" ::= { ubiEnvMonSupplyEntry 4 } ubiEnvMonExternalAlarmAc OBJECT-TYPE SYNTAX INTEGER { normal(1), fail(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The power supply convertor AC. nomal (1) fail (2)" ::= { ubiEnvMonSupplyEntry 5 } ubiEnvMonExternalAlarmUnit OBJECT-TYPE SYNTAX INTEGER { normal(1), fail(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The power supply convertor unit. nomal (1) fail (2)" ::= { ubiEnvMonSupplyEntry 6 } -- ***************************************************************** -- ubiEnvMonSupplyChannelTable -- **************************************************************** ubiEnvMonSupplyChannelTable OBJECT-TYPE SYNTAX SEQUENCE OF UbiEnvMonSupplyChannelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table represents the extension status for DC power supply." ::= { ubiEnvMonObjects 4 } ubiEnvMonSupplyChannelEntry OBJECT-TYPE SYNTAX UbiEnvMonSupplyChannelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table, representing the extended status of the associated DC power supply maintained by the environmental monitor card." INDEX { ubiEnvMonSupplyIndex, ubiEnvMonSupplyChannelType } ::= { ubiEnvMonSupplyChannelTable 1 } UbiEnvMonSupplyChannelEntry ::= SEQUENCE { ubiEnvMonSupplyChannelType INTEGER, ubiEnvMonSupplyChannelState UbiEnvMonState } ubiEnvMonSupplyChannelType OBJECT-TYPE SYNTAX INTEGER { dc_48v_a(1), dc_48v_b(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unique index for the DC power supply channel." ::= { ubiEnvMonSupplyChannelEntry 1 } ubiEnvMonSupplyChannelState OBJECT-TYPE SYNTAX UbiEnvMonState MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the DC power supply channel being instrumented. Represents the power state of a device being monitored. Valid values are: normal(1): the environment is good, such as low temperature. notPresent(5): the environmental monitor is not present, such as temperature sensors do not exist. notFunctioning(6): the environmental monitor does not function properly. " ::= { ubiEnvMonSupplyChannelEntry 2 } -- ***************************************************************** -- ubiEnvMonMIBNotificationEnables -- **************************************************************** ubiEnvMonEnableTempStatusChange OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates whether the system produces the ubiEnvMonTempStatusChangeNotif. A false value prevents temperature notifications from being sent by this entity." DEFVAL { false } ::= { ubiEnvMonMIBNotificationEnables 1 } ubiEnvMonEnableFanStatusChange OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates whether the system produces the ubiEnvMonFanStatusChangeNotif. A false value prevents fan notifications from being sent by this entity." DEFVAL { false } ::= { ubiEnvMonMIBNotificationEnables 2 } ubiEnvMonEnableSupplyStatusChange OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates whether the system produces the ubiEnvMonSuppStatusChangeNotif. A false value prevents redundant supply notifications from being generated by this system." DEFVAL { false } ::= { ubiEnvMonMIBNotificationEnables 3 } ubiEnvMonEnableSupplyChannelStatusChange OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates whether the system produces the ubiEnvMonSuppExtStatusChangeNotif. A false value prevents redundant supply notifications from being generated by this system." DEFVAL { false } ::= { ubiEnvMonMIBNotificationEnables 4 } -- ***************************************************************** -- ubiEnvMonMIBNotificationPrefix -- **************************************************************** -- the following two OBJECT IDENTIFIERS are used to define SNMPv2 Notifications -- that are backward compatible with SNMPv1 Traps. ubiEnvMonMIBNotifications OBJECT IDENTIFIER ::= { ubiEnvMonMIBNotificationPrefix 0 } ubiEnvMonTempStatusChange NOTIFICATION-TYPE OBJECTS { ubiEnvMonTemperatureDescr, ubiEnvMonTemperatureValue, ubiEnvMonTemperatureState } STATUS current DESCRIPTION "A ubiEnvMonTempStatusChangeNotif is sent if there is change in the state of a device being monitored by ubiEnvMonTemperatureState." ::= { ubiEnvMonMIBNotifications 1 } ubiEnvMonFanStatusChange NOTIFICATION-TYPE OBJECTS { ubiEnvMonFanDescr, ubiEnvMonFanState } STATUS current DESCRIPTION "A ubiEnvMonFanStatusChangeNotif is sent if there is change in the state of a device being monitored by ubiEnvMonFanState." ::= { ubiEnvMonMIBNotifications 2 } ubiEnvMonSupplyStatusChange NOTIFICATION-TYPE OBJECTS { ubiEnvMonSupplyDescr, ubiEnvMonSupplyState } STATUS current DESCRIPTION "A ubiEnvMonSupplyStatChangeNotif is sent if there is change in the state of a device being monitored by ubiEnvMonSupplyState." ::= { ubiEnvMonMIBNotifications 3 } ubiEnvMonSupplyChannelStatusChange NOTIFICATION-TYPE OBJECTS { ubiEnvMonSupplyDescr, ubiEnvMonSupplyChannelType, ubiEnvMonSupplyChannelState } STATUS current DESCRIPTION "A ubiEnvMonSuppExtStatusChangeNotif is sent if there is change in the state of a device being monitored by ubiEnvMonSupplyExtChannelStatus." ::= { ubiEnvMonMIBNotifications 4 } -- ***************************************************************** -- ubiEnvMonMIBConformance -- **************************************************************** -- conformance information ubiEnvMonMIBCompliances OBJECT IDENTIFIER ::= { ubiEnvMonMIBConformance 1 } ubiEnvMonMIBGroups OBJECT IDENTIFIER ::= { ubiEnvMonMIBConformance 2 } -- compliance statements ubiEnvMonMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the Ubiquoss Environmental Monitor MIB." MODULE -- this module MANDATORY-GROUPS { ubiEnvMonMIBGroup, ubiEnvMonMIBNotifGroup } GROUP ubiEnvMonMIBGroup DESCRIPTION "The ubiEnvMonMIBGroup is applicable for implementations which need to get the system environment information." GROUP ubiEnvMonMIBNotifGroup DESCRIPTION "The ubiEnvMonMIBNotifGroup must be implemented for system environment that have notification." ::= { ubiEnvMonMIBCompliances 1 } -- units of conformance ubiEnvMonMIBGroup OBJECT-GROUP OBJECTS { ubiEnvMonTemperatureDescr, ubiEnvMonTemperatureValue, ubiEnvMonTemperatureHighThreshold, ubiEnvMonTemperatureLowThreshold, ubiEnvMonTemperatureLastShutdown, ubiEnvMonTemperatureState, ubiEnvMonFanDescr, ubiEnvMonFanState, ubiEnvMonSupplyDescr, ubiEnvMonSupplyState, ubiEnvMonSupplySource, ubiEnvMonSupplyExtChannel, ubiEnvMonSupplyExtChannelState, ubiEnvMonEnableTempStatusChangeNotif, ubiEnvMonEnableFanStatusChangeNotif, ubiEnvMonEnableSuppStatusChangeNotif, ubiEnvMonEnableSuppExtStatusChangeNotif } STATUS current DESCRIPTION "A collection of objects providing environmental monitoring capability to a ubi chassis." ::= { ubiEnvMonMIBGroups 1 } ubiEnvMonMIBNotifGroup NOTIFICATION-GROUP NOTIFICATIONS { ubiEnvMonTempStatusChangeNotif, ubiEnvMonFanStatusChangeNotif, ubiEnvMonSuppStatusChangeNotif, ubiEnvMonSuppExtStatusChangeNotif } STATUS current DESCRIPTION "A notification group providing notification for environmental monitoring. " ::= { ubiEnvMonMIBGroups 2 } END