-- ***************************************************************** -- UBQS-LAG-MIB.: Ubiquoss LAG MIB -- -- Dec 2010, Park Hyung Eun -- -- Copyright (c) 2010 by Ubiquoss, Corp. -- All rights reserved. -- ***************************************************************** -- UBQS-LAG-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP, FROM SNMPv2-CONF TEXTUAL-CONVENTION, RowStatus, FROM SNMPv2-TC ifIndex, InterfaceIndex, FROM IF-MIB DisplayString, FROM RFC1213-MIB UbiPortList, FROM UBQS-TC ubiMgmtv2 FROM UBQS-SMI; ubiLagMIB MODULE-IDENTITY LAST-UPDATED "201012070000Z" ORGANIZATION "Ubiquoss Corp." CONTACT-INFO " Ubiquoss Customer Service Postal: 24F Milennium B/D, 467-12, Dogok-Dong, GangNam-Gu, Seoul 135-270 Korea Tel: 82-2-2190-3100" DESCRIPTION "Link Aggregation MIB module for managing 802.3ad" ::= { ubiMgmtv2 16 } -- ***************************************************************** -- Textual Conventions -- ***************************************************************** UbiLagList ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The type of aggregation load-balance" SYNTAX BITS { src-mac(1), dst-mac(2), src-dst-mac(3), src-ip(4), dst-ip(5), src-dst-ip(6), src-port(7), dst-port(8), src-dst-port(9) } -- ***************************************************************** -- ubiLagMIBObjects -- ***************************************************************** ubiLagMIBNotificationsPrefix OBJECT IDENTIFIER ::= { ubiLagMIB 0 } ubiLagMIBObjects OBJECT IDENTIFIER ::= { ubiLagMIB 1 } ubiLagMIBConformance OBJECT IDENTIFIER ::= { ubiLagMIB 2 } ubiAgg OBJECT IDENTIFIER ::= { ubiLagMIBObjects 1 } -- ***************************************************************** -- ubiLagNotification -- ***************************************************************** ubiBackupIntfMIBNotifications OBJECT IDENTIFIER ::= { ubiLagMIBNotificationsPrefix 1 } ubiBackupIntfSwitchover NOTIFICATION-TYPE OBJECTS { ubiReduIfIndex, ubiReduBackupIfIndex, ubiReduIfName, ubiReduLink, ubiReduMode, ubiReduRvt, ubiReduBackupIf } STATUS current DESCRIPTION "Backup Interface Switchover Notifiaction" ::= { ubiBackupIntfMIBNotifications 1 } -- ***************************************************************** -- ubiAggTable -- ***************************************************************** ubiAggTable OBJECT-TYPE SYNTAX SEQUENCE OF UbiAggEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains the generic aggregation information." ::= { ubiAgg 1 } ubiAggEntry OBJECT-TYPE SYNTAX UbiAggEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information for each aggregation." INDEX { ubiLagAggId } ::= { ubiAggTable 1 } UbiAggEntry ::= SEQUENCE { ubiAggId Integer32, ubiAggDelete INTEGER } ubiAggId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Aggregation ID" ::= { ubiAggEntry 1 } ubiAggDelete OBJECT-TYPE SYNTAX INTEGER { none(0), set(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Remove the particular aggregation. If it is success to remove the entry, the corresponding port information is deleted from ubiAggPortTable." ::= { ubiAggEntry 2 } -- ***************************************************************** -- ubiAggPortTable -- ***************************************************************** ubiAggPortTable OBJECT-TYPE SYNTAX SEQUENCE OF UbiAggPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains the aggregation port information." ::= { ubiAgg 2 } ubiAggPortEntry OBJECT-TYPE SYNTAX UbiAggPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information for each aggregation port." INDEX { ubiLagAggId, ifIndex } ::= { ubiAggPortTable 1 } UbiAggPortEntry ::= SEQUENCE { ubiAggPortAggMode INTEGER, ubiAggPortRowStatus RowStatus } ubiAggPortAggMode OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following on(2), off(3), active(4), passive(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "The mode of aggregation that needed to create the particular aggregation and set the aggregation port." ::= { ubiAggPortEntry 1 } ubiAggPortRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of aggregation row. The createAndGo(4)can create the aggregation and set the particular port to that aggregation. The destroy(6) can unset the particular port from the aggregation. If you want to remove the aggregation, set ubiAggDelete." ::= { ubiAggPortEntry 2 } -- ***************************************************************** -- ubiLagLoadBalanceTable -- ***************************************************************** ubiLagLoadBalanceTable OBJECT-TYPE SYNTAX SEQUENCE OF UbiLagLoadBalanceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains the aggregation load-balance information." ::= { ubiAgg 3 } ubiLagLoadBalanceEntry OBJECT-TYPE SYNTAX UbiLagLoadBalanceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information for aggregation load-balance." INDEX { ubiLagLoadBalanceAggId } ::= { ubiLagLoadBalanceTable 1 } UbiLagLoadBalanceEntry ::= SEQUENCE { ubiLagLoadBalanceAggId INTEGER, ubiLagLoadBalanceMode UbiLagList } ubiLagLoadBalanceAggId OBJECT-TYPE SYNTAX INTEGER(0..256) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object consists of two cases. First case is '0' that means global configuration. In this case, all ports inside a switch are affected by load-balance configured globally. Second case is '1-256' that means aggregator id. In this case, load-balance configuration affects particular port only. Two case couldn't be used together." ::= { ubiLagLoadBalanceEntry 1 } ubiLagLoadBalanceMode OBJECT-TYPE SYNTAX UbiLagList MAX-ACCESS read-write STATUS current DESCRIPTION "The mode of port-group load-balance" ::= { ubiLagLoadBalanceEntry 2 } -- ***************************************************************** -- ubiRedundancyPort -- ***************************************************************** ubiRedundancyPort OBJECT IDENTIFIER ::= { ubiLagMIBObjects 2 } -- ***************************************************************** -- ubiRedundancyPortTable -- ***************************************************************** ubiRedundancyPortTable OBJECT-TYPE SYNTAX SEQUENCE OF UbiRedundancyPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains the redundancy port information." ::= { ubiRedundancyPort 1 } ubiRedundancyPortEntry OBJECT-TYPE SYNTAX UbiRedundancyPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information for redundancy prot." INDEX { ubiReduIfIndex } ::= { ubiRedundancyPortTable 1 } UbiRedundancyPortEntry ::= SEQUENCE { ubiReduIfIndex InterfaceIndex, ubiReduBackupIfIndex InterfaceIndex, ubiReduIfName DisplayString, ubiReduLink INTEGER, ubiReduMode INTEGER, ubiReduRvt INTEGER, ubiReduBackupIf DisplayString, ubiReduStatus INTEGER, ubiReduWtr INTEGER, ubiReduHoldoff INTEGER, ubiReduRowStatus RowStatus } ubiReduIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Ifindex of Backup Interface" ::= { ubiRedundancyPortEntry 1 } ubiReduBackupIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Backup Interce Ifindex" ::= { ubiRedundancyPortEntry 2 } ubiReduIfName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "interface name of Backup Interface" ::= { ubiRedundancyPortEntry 3 } ubiReduLink OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Link of Backup interface 1 : up 2 : down " ::= { ubiRedundancyPortEntry 4 } ubiReduMode OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "mode of backup interface 0 : none 1 : primary 2 : secondary " ::= { ubiRedundancyPortEntry 5 } ubiReduRvt OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "revert mode of backup interface 0 : Off 1 : On " ::= { ubiRedundancyPortEntry 6 } ubiReduBackupIf OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "backup interface name of backup interface" ::= { ubiRedundancyPortEntry 7 } ubiReduStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "state of backup interface 0 : none 1 : normal operation 2 : backup mode 3 : wait to backup 4 : wait to revert 5 : both down 6 : disable " ::= { ubiRedundancyPortEntry 8 } ubiReduWtr OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Wtr of backup interface 1..720 : Set 0 : Unset " ::= { ubiRedundancyPortEntry 9 } ubiReduHoldoff OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Holdoff of backup interface 1..10 : Set 0 : Unset" ::= { ubiRedundancyPortEntry 10 } ubiReduRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of backup interface row. The createAndGo(4)can create the backup interface and set the particular port to that backup interface. The destroy(6) can unset the particular port from the backup interface. If you want to remove the backup interface, set backup interface Delete." ::= { ubiRedundancyPortEntry 11 } -- ***************************************************************** -- ubiLagMIBConformance -- ***************************************************************** -- Conformance Information ubiLagMIBCompliances OBJECT IDENTIFIER ::= { ubiLagMIBConformance 1 } ubiLagMIBGroups OBJECT IDENTIFIER ::= { ubiLagMIBConformance 2 } -- compliance statements ubiLagMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for Lag implementations." MODULE -- this module MANDATORY-GROUPS { ubiAggGroup } ::= { ubiLagMIBCompliances 1 } -- units of conformance ubiAggGroup OBJECT-GROUP OBJECTS { ubiAggDelete, ubiAggId, ubiAggAdminStatus, ubiAggRowStatus } STATUS current DESCRIPTION "A collection of objects that provide aggregation creation or deletion." ::= { ubiLagMIBGroups 1 } END