-- ***************************************************************** -- UBQS-REDUNDANCY-MIB : Ubiquoss Redundancy MIB file -- -- June 2013, Doyle Son -- -- Copyright (c) 2013 by Ubiquoss, Corp. -- All rights reserved. -- -- ***************************************************************** -- UBQS-REDUNDANCY-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, FROM SNMPv2-SMI TEXTUAL-CONVENTION, DisplayString, TimeStamp, TruthValue, PhysAddress FROM SNMPv2-TC ubiMgmtv2 FROM UBQS-SMI InetAddress, InetAddressType, InetAddressPrefixLength, FROM INET-ADDRESS-MIB InterfaceIndex, InterfaceIndexOrZero FROM IF-MIB; ubiRedundancyMIB MODULE-IDENTITY LAST-UPDATED "201306180000Z" ORGANIZATION "Ubiquoss Corp." CONTACT-INFO " Ubiquoss Customer Service Postal: 24F Milennium B/D, 467-12, Dogok-Dong, GangNam-Gu, Seoul 135-270 Korea Tel: 82-2-2190-3100" DESCRIPTION "The UBQS-REDUNDANCY-MIB is used to monitor and configure the redundancy appliances." ::= { ubiMgmtv2 29 } -- *********************************************************** -- TEXTUAL-CONVENTION -- Define the composed syntax -- *********************************************************** RedundancyState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Role states for redundancy. Valid values are : notConfigured (1) The appliance is not configured for redundancy. active (2) The appliance is the active appliance. standby (3) The appliance is warm standby mode activeLostStandby (4) The active appliance is not getting any response from the standby appliance. " SYNTAX INTEGER { notConfigured(1), active (2), standby (3), activeLostStandby(4) } FlashPath ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents 'copy peer'." SYNTAX INTEGER { os1(0), os2(1), config(2) } SwitchOverReason ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Role states for redundancy. Valid values are : none (0) none of the following lossConnWithActive (1) lost connection with active forcedSwitchOver (2) Switchover occurs by force unknown (3) Switchover occurs by unknown reason " SYNTAX INTEGER { none(0), lossConnWithActive (1), forcedSwitchOver (2), unknown (3) } -- *********************************************************** -- ubiRedundancyMIB -- *********************************************************** ubiRedundancyMIBNotificationPrefix OBJECT IDENTIFIER ::= { ubiRedundancyMIB 0 } ubiRedundancyObjects OBJECT IDENTIFIER ::= { ubiRedundancyMIB 1 } ubiRedundancyPeerObjects OBJECT IDENTIFIER ::= { ubiRedundancyMIB 2 } ubiSwitchoverObjects OBJECT IDENTIFIER ::= { ubiRedundancyMIB 3 } ubiRedundancyMIBConformance OBJECT IDENTIFIER ::= { ubiRedundancyMIB 4 } -- *********************************************************** -- ubiEntityAlarmMIBNotifications -- *********************************************************** ubiSwitchOverNotification NOTIFICATION-TYPE OBJECTS { ubiLastSwitchOverTime, ubiLastSwitchOverReason, ubiSwitchOverRedundancySyncState } STATUS current DESCRIPTION "The agent generates this trap when a switchover occurs." ::= { ubiRedundancyMIBNotificationPrefix 1 } ubiRedundancyConnectionStateNotification NOTIFICATION-TYPE OBJECTS { ubiRedundancyConnectionState, } STATUS current DESCRIPTION "The agent generates this trap when the connection state of standby appliance device is changed." ::= { ubiRedundancyMIBNotificationPrefix 2 } ubiRedundancySyncNotification NOTIFICATION-TYPE OBJECTS { ubiRedundancySyncState, } STATUS current DESCRIPTION "The agent generates this trap when the synchronization process with standby SCU is done. This notification occurs after standby is connected." ::= { ubiRedundancyMIBNotificationPrefix 3 } ubiRedundancySyncStateChangeNotification NOTIFICATION-TYPE OBJECTS { ubiRedundancySyncState, } STATUS current DESCRIPTION "The agent generates this trap when the synchronization state has been changed." ::= { ubiRedundancyMIBNotificationPrefix 4 } -- *********************************************************** -- ubiRedundancyObjects -- *********************************************************** ubiRedundancy OBJECT IDENTIFIER ::= { ubiRedundancyObjects 1 } ubiRedundancyReload OBJECT-TYPE SYNTAX INTEGER { both(1), peer(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reload Active/Standby or Peer device." ::= { ubiRedundancy 1 } ubiRedundancyMyRedundancyState OBJECT-TYPE SYNTAX RedundancyState MAX-ACCESS read-only STATUS current DESCRIPTION "The HA redundancy state of this appliance device." ::= { ubiRedundancy 2 } ubiRedundancyConnStateNotificationEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable redundancy connection state notification via SNMP." ::= { ubiRedundancy 4 } -- *********************************************************** -- ubiRedundancyTable -- *********************************************************** ubiRedundancyTable OBJECT-TYPE SYNTAX SEQUENCE OF UbiRedundancyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table keeps the current configuration of the redundancy information of the active and standby units." ::= { ubiRedundancy 3 } ubiRedundancyEntry OBJECT-TYPE SYNTAX UbiRedundancyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing redundancy information of the active and standby units" INDEX { ubiRedundancyIsActivePreferred } ::= { ubiRedundancyTable 1 } UbiRedundancyEntry ::= SEQUENCE { ubiRedundancyIsActivePreferred TruthValue, ubiRedundancyState RedundancyState, ubiRedundancyConnectionState INTEGER, } ubiRedundancyIsActivePreferred OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "This status indicates whether this appliance device is preferred to active or not. Commonly upper(or left) device has this value as True(1) and low(or right) device has this value as False(0). " ::= { ubiRedundancyEntry 1 } ubiRedundancyState OBJECT-TYPE SYNTAX RedundancyState MAX-ACCESS read-only STATUS current DESCRIPTION "The HA redundancy state of the appliance device. Role states for redundancy. Valid values are : notConfigured (1) The appliance is not configured for redundancy. active (2) The appliance is the active appliance. standby (3) The appliance is warm standby mode activeLostStandby (4) The active appliance is not getting any response from the standby appliance. " ::= { ubiRedundancyEntry 2 } ubiRedundancyConnectionState OBJECT-TYPE SYNTAX INTEGER { disconnect(1), connect(2) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The HA redundancy connection state of standby appliance device." ::= { ubiRedundancyEntry 3 } -- *********************************************************** -- ubiRedundancySyncTable -- *********************************************************** ubiRedundancySyncTable OBJECT-TYPE SYNTAX SEQUENCE OF UbiRedundancySyncEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table keeps the information of the redundancy sync state of the active and standby units." ::= { ubiRedundancy 5 } ubiRedundancySyncEntry OBJECT-TYPE SYNTAX UbiRedundancySyncEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing redundancy sync information of the active and standby units" INDEX { ubiRedundancyIsActivePreferred } ::= { ubiRedundancySyncTable 1 } UbiRedundancySyncEntry ::= SEQUENCE { ubiRedundancySyncState INTEGER, ubiRedundancySyncNotificationEnabled TruthValue, ubiRedundancySyncStateChangeNotificationEnabled TruthValue, } ubiRedundancySyncState OBJECT-TYPE SYNTAX INTEGER { sync(1), notSync(2) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The redundancy sync state of active appliance device for standby. This sync state is related with 'redundancy-check' function. ACTIVE periodically checks sync state with STANDBY using this function. Valid values are : sync (1) synchronized with standby. notSync (2) some mismatch occurs with standby." ::= { ubiRedundancySyncEntry 1 } ubiRedundancySyncNotificationEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable redundancy sync notification via SNMP." ::= { ubiRedundancySyncEntry 2 } ubiRedundancySyncStateChangeNotificationEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable redundancy sync state change notification via SNMP." ::= { ubiRedundancySyncEntry 3 } -- *********************************************************** -- ubiRedundancyAddrTable -- *********************************************************** ubiRedundancyAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF UbiRedundancyAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table keeps the current configuration of the address information of the active and standby appliances. There is an entry in this table corresponding to each network interface that is configured for redundancy. Thus, the number of entries in this table corresponds to the number of interfaces configured for redundancy." ::= { ubiRedundancyObjects 2 } ubiRedundancyAddrEntry OBJECT-TYPE SYNTAX UbiRedundancyAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing address information for redundancy configuration on a network interface." INDEX { ubiRedundancyAddrIfIndex, ubiRedundancyAddrMyAddressType } ::= { ubiRedundancyAddrTable 1 } UbiRedundancyAddrEntry ::= SEQUENCE { ubiRedundancyAddrIfIndex InterfaceIndex, ubiRedundancyAddrMyAddressType InetAddressType, ubiRedundancyAddrMyAddress InetAddress, ubiRedundancyAddrPeerAddressType InetAddressType, ubiRedundancyAddrPeerAddress InetAddress } ubiRedundancyAddrIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The index value which uniquely identifies the interface to which this entry is applicable." ::= { ubiRedundancyAddrEntry 1 } ubiRedundancyAddrMyAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of address stored in ubiMyAddressType." ::= { ubiRedundancyAddrEntry 2 } ubiRedundancyAddrMyAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the interface configured for this HA configuration in this appliance. The type of this mib variable is defined in ubiMyAddressType. " ::= { ubiRedundancyAddrEntry 3 } ubiRedundancyAddrPeerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of address stored in ubiPeerAddressType" ::= { ubiRedundancyAddrEntry 4 } ubiRedundancyAddrPeerAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the interface configured for this HA configuration in the peer appliance. The type of this mib variable is defined in ubiPeerAddressType. " ::= { ubiRedundancyAddrEntry 5 } -- *********************************************************** -- ubiRedundancyPeerObjects -- *********************************************************** ubiPeerSysInfo OBJECT IDENTIFIER ::= { ubiRedundancyPeerObjects 1 } ubiPeerResource OBJECT IDENTIFIER ::= { ubiRedundancyPeerObjects 2 } ubiPeerEnvironment OBJECT IDENTIFIER ::= { ubiRedundancyPeerObjects 3 } ubiPeerBootInfo OBJECT IDENTIFIER ::= { ubiRedundancyPeerObjects 4 } -- *********************************************************** -- ubiPeerSysInfo -- *********************************************************** ubiPeerSWVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Software version of the peer HA system" ::= { ubiPeerSysInfo 1 } ubiPeerSerialNumber OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Serial Number of the peer HA system" ::= { ubiPeerSysInfo 2 } ubiPeerPhysicalAddress OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Peer's physical address." ::= { ubiPeerSysInfo 3 } -- *********************************************************** -- ubiPeerResource -- *********************************************************** ubiPeerCpuFiveSec OBJECT-TYPE SYNTAX Counter32 UNITS "%" MAX-ACCESS not-accessible STATUS current DESCRIPTION "CPU busy percentage in the last 5 second period." ::= { ubiPeerResource 1 } ubiPeerCpuOneMin OBJECT-TYPE SYNTAX Counter32 UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "CPU busy percentage in the last 1 minute period." ::= { ubiPeerResource 2 } ubiPeerCpuFiveMin OBJECT-TYPE SYNTAX Counter32 UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "CPU busy percentage in the last 5 minute period." ::= { ubiPeerResource 3 } ubiPeerMemoryAlloc OBJECT-TYPE SYNTAX Counter32 UNITS "kbyte" MAX-ACCESS not-accessible STATUS current DESCRIPTION "Memory allocation usage." ::= { ubiPeerResource 4 } ubiPeerMemoryFree OBJECT-TYPE SYNTAX Counter32 UNITS "kbyte" MAX-ACCESS read-only STATUS current DESCRIPTION "Memory free usage." ::= { ubiPeerResource 5 } ubiPeerMemoryTotal OBJECT-TYPE SYNTAX Counter32 UNITS "kbyte" MAX-ACCESS read-only STATUS current DESCRIPTION "CPU busy percentage in the last 5 minute period." ::= { ubiPeerResource 6 } ubiPeerMemoryFreePercentage OBJECT-TYPE SYNTAX Counter32 UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates available memory allocation space in percentage." ::= { ubiPeerResource 7 } -- *********************************************************** -- ubiPeerEnvironment -- *********************************************************** ubiPeerTemperature OBJECT-TYPE SYNTAX Gauge32 UNITS "'C" MAX-ACCESS read-only STATUS current DESCRIPTION "peer's current temperature." ::= { ubiPeerEnvironment 1 } -- *********************************************************** -- ubiPeerBootInfo -- *********************************************************** ubiPeerNextBootImage OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Booting OS Image's name for peer unit when setting this object, It should be specified the file name with path under /flash directory and Peer's next booting mode will be Flash booting. Valid paths under /flash directory are : - os1/ - os2/ e.g) os1/BootImageName.Z " ::= { ubiPeerBootInfo 1 } ubiPeerImageModify OBJECT IDENTIFIER ::= { ubiPeerBootInfo 2 } -- *********************************************************** -- ubiPeerImageCopyOrErase -- *********************************************************** ubiPeerImagePath OBJECT-TYPE SYNTAX INTEGER { os1(1), os2(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "warning : It operates for only Active unit, not Standby Unit. Path of the file that you want to copy or erase. Represents 'copy (os1:|os2:) peer ' or 'erase (os1:|os2:) peer ' CLIs. for copy operation, path of Active unit and for erase operation, path of Standby unit. " ::= { ubiPeerImageModify 1 } ubiPeerImageFileName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "warning : It operates for only Active unit, not Standby Unit. Name of the file that you want to copy or erase. for copy operation, file name at Active unit and for erase operation, file anme at Standby unit. " ::= { ubiPeerImageModify 2 } ubiPeerImageModifyOperate OBJECT-TYPE SYNTAX INTEGER { copy(1), erase(2) } MAX-ACCESS write-only STATUS current DESCRIPTION "execute to copy or erase configurations." ::= { ubiPeerImageModify 3 } -- *********************************************************** -- ubiSwitchoverObjects -- *********************************************************** ubiSwitchover OBJECT IDENTIFIER ::= { ubiSwitchoverObjects 1 } -- *********************************************************** -- ubiSwitchoverInfo -- *********************************************************** ubiLastSwitchOverReason OBJECT-TYPE SYNTAX SwitchOverReason MAX-ACCESS read-only STATUS current DESCRIPTION "Reason for the most recent switchover. Valid values are : nont (0) none of the following lossConnWithActive (1) lost connection with active forcedSwitchOver (2) Switchover occurs by force unknown (3) Switchover occurs by unknown reason" ::= { ubiSwitchover 1 } ubiLastSwitchOverTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The local date and time when the last switchover event occurred and was logged to the system. " ::= { ubiSwitchover 2 } ubiSwitchoverNotificationEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable switchover notification via SNMP." ::= { ubiSwitchover 3 } ubiSwitchOverRedundancySyncState OBJECT-TYPE SYNTAX INTEGER { sync(1), notSync(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The HA redundancy sync state of the appliance device after switchover. Valid values are : sync (1) SCU synchronization is done . notSync (2) SCU synchronization is fail or still in progress. " ::= { ubiSwitchover 4 } -- *********************************************************** -- ubiRedundancyMIBConformance -- *********************************************************** -- conformance information ubiRedundancyMIBCompliance OBJECT IDENTIFIER ::= { ubiRedundancyMIBConformance 1 } ubiRedundancyMIBGroups OBJECT IDENTIFIER ::= { ubiRedundancyMIBConformance 2 } -- -- compliance statements -- ubiRedundancyMIBCompliances MODULE-COMPLIANCE STATUS current DESCRIPTION "An Redundancy-MIB implementation can implement this group to provide Redundancy properties." MODULE -- this module MANDATORY-GROUPS { ubiRedundancyMIBRedundancyGroup, ubiRedundancyMIBSwitchoverGroup, ubiRedundancyMIBNotificationGroup } GROUP ubiRedundancyMIBRedundancyGroup DESCRIPTION "The ubiRedundancyMIBRedundancyGroup must be implemented for redundancy properties" GROUP ubiRedundancyMIBSwitchoverGroup DESCRIPTION "The ubiRedundancyMIBSwitchoverGroup must be implemented for switchover information" GROUP ubiRedundancyMIBNotificationGroup DESCRIPTION "The ubiRedundancyMIBNotificationGroup must be implemented for redundancy and switchover that have notification" ::= { ubiRedundancyMIBCompliance 1 } -- units of conformance ubiRedundancyMIBRedundancyGroup OBJECT-GROUP OBJECTS { } STATUS current DESCRIPTION "The collection of objects which are used to get the operational state and redundancy state of the modules" ::= { ubiRedundancyMIBGroups 1 } ubiRedundancyMIBSwitchoverGroup OBJECT-GROUP OBJECTS { } STATUS current DESCRIPTION "The collection of objects which are used to get the operational state and redundancy state of the modules" ::= { ubiRedundancyMIBGroups 2 } ubiRedundancyMIBNotificationGroup OBJECT-GROUP OBJECTS { } STATUS current DESCRIPTION "The collection of objects which are used to send a notification." ::= { ubiRedundancyMIBGroups 3 } END