-- ***************************************************************** -- UBQS-TC: Ubiquoss MIB Textual Conventions -- -- June 2009, Hyung Eun Park -- -- Copyright (c) 2009 by Ubiquoss, Corp. -- All rights reserved. -- **************************************************************** UBQS-TC DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, Gauge32, Integer32, Unsigned32, Counter64 FROM SNMPv2-SMI TEXTUAL-CONVENTION FROM SNMPv2-TC; -- 2010.11.26, defined bridge id (IEEE 8021) --UbiBridgeId ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "Represents the bridge id. -- bridge id : 1 ~ 32 -- backbone -- beb -- " -- SYNTAX OCTET STRING (SIZE (0..64)) UbiBridgeId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the bridge id. bridge id : 1 ~ 32 default bridge (1000) backbone(1001) " SYNTAX INTEGER { -- looking for better mechanism to represent the bridge id default(1000), backbone(1001) } Layer2Cos ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An integer that is in the range of the layer 2 CoS values. It corresponds to the IEEE 802.1P CoS value which defines eight (2^3) user priority levels. Note: the IEEE 802.1P has been merged into IEEE 802.1D." REFERENCE "IEEE 802.1D, 2004 Edition, Annex G User priorities and traffic classes." SYNTAX Integer32 (0..7 ) UbiNetworkProtocol ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the different types of network layer protocols." SYNTAX INTEGER { ip(1), decnet(2), pup(3), chaos(4), xns(5), x121(6), appletalk(7), clns(8), lat(9), vines(10), cons(11), apollo(12), stun(13), novell(14), qllc(15), snapshot(16), atmIlmi(17), bstun(18), x25pvc(19), ipv6(20), cdm(21), nbf(22), bpxIgx(23), clnsPfx(24), http(25), unknown(65535) } UbiNetworkAddress ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents a network layer address. The length and format of the address is protocol dependent as follows: ip 4 octets decnet 2 octets pup obsolete chaos 2 octets xns 10 octets first 4 octets are the net number last 6 octets are the host number x121 appletalk 3 octets first 2 octets are the net number last octet is the host number clns lat vines 6 octets first 4 octets are the net number last 2 octets are the host number cons apollo 10 octets first 4 octets are the net number last 6 octets are the host number stun 8 octets novell 10 octets first 4 octets are the net number last 6 octets are the host number qllc 6 octets bstun 1 octet - bi-sync serial tunnel snapshot 1 octet atmIlmi 4 octets x25 pvc 2 octets (12 bits) ipv6 16 octets cdm nbf bgpIgx clnsPfx upto 20 octets http upto 70 octets first 4 octets are the IPv4 host address next 2 octets are the TCP port number remaining(1 upto 64) octets are the URI" SYNTAX OCTET STRING Unsigned64 ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An unsigned 64 bit integer. We use SYNTAX Counter64 for the encoding rules." SYNTAX Counter64 InterfaceIndexOrZero ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Either the value 0, or the ifIndex value of an interface in the ifTable." SYNTAX Integer32 (0..2147483647 ) SAPType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Service Access Point - is a term that denotes the means by which a user entity in layer n+1 accesses a service of a provider entity in layer n." SYNTAX Integer32 (0..254 ) CountryCode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents a case-insensitive 2-letter country code taken from ISO-3166. Unrecognized countries are represented as empty string." SYNTAX OCTET STRING (SIZE (0 | 2)) CountryCodeITU ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This textual convention represents a country or area code for non-standard facilities in telematic services." REFERENCE "ITU-T T.35 - Section 3.1 Country Code" SYNTAX Unsigned32 (0..255 ) EntPhysicalIndexOrZero ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This textual convention is an extension of entPhysicalIndex. If non-zero, the object is an entPhysicalIndex. If zero, no appropriate entPhysicalIndex exists. Any additional semantics are object specific." SYNTAX Integer32 (0..2147483647 ) UbiRowOperStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the operational status of an table entry. This textual convention allows explicitly representing the states of rows dependent on rows in other tables. active(1) - Indicates this entry's RowStatus is active and the RowStatus for each dependency is active. activeDependencies(2) - Indicates that the RowStatus for each dependency is active, but the entry's RowStatus is not active. inactiveDependency(3) - Indicates that the RowStatus for at least one dependency is not active. missingDependency(4) - Indicates that at least one dependency does not exist in it's table." SYNTAX INTEGER { active(1), activeDependencies(2), inactiveDependency(3), missingDependency(4) } UbiPort ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TCP or UDP port number range." REFERENCE "Transmission Control Protocol. J. Postel. RFC793, User Datagram Protocol. J. Postel. RFC768" SYNTAX Integer32 (0..65535 ) UbiIpProtocol ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "IP protocol number range." REFERENCE "Internet Protocol. J. Postel. RFC791" SYNTAX Integer32 (0..255 ) UbiLocationClass ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An enumerated value which provides an indication of the general location type of a particular physical and/or logical interface. chassis - a system framework for mounting one or more shelves/slots/cards. shelf - a cabinet that holds one or more slots. slot - card or subSlot holder. subSlot - daughter-card holder. port - a physical port (e.g., a DS1 or DS3 physical port). subPort - a logical port on a physical port (e.g., a DS1 subPort on a DS3 physical port). channel - a logical interface (e.g., a DS0 channel, signaling channel, ATM port, other virtual interfaces). subChannel - a sub-channel on a logical interface." SYNTAX INTEGER { chassis(1), shelf(2), slot(3), subSlot(4), port(5), subPort(6), channel(7), subChannel(8) } UbiLocationSpecifier ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Use this TC to define objects that indicate the physical entity and/or logical interface location of a managed entity on a managed device. In SNMP, a standard mechanism for indicating the physical location of entities is via the ENTITY-MIB. However, that approach is not satisfactory in some cases because: 1. The entity requiring a location-based naming may be associated with an entity which can not be represented as a physical entity in the ENTITY-MIB, 2. NMS applications may desire a more direct name/representation of a physical entity than is available via the ENTITY-MIB, e.g., a physical entity which is named via a hierarchy of levels in the ENTITY-MIB. The value of an object defined using this TC is an ASCII string consisting of zero or more elements separated by commas. Each element is of the form = . An example of this syntax is 'slot=5,port=3'. The syntax of the string is formally specified using ABNF notation (with one exception, noted below), as follows: location-specifier = elem *(',' elem) ; subject to ; size restriction specified in the SYNTAX ; clause below elem = loctype '=' number number = %x00-FFFFFFFF / %d0-4294967295 loctype = 1*32VCHAR It is recommended that loctype use one of the enumerated labels defined for UbiLocationClass. (NOTE: To conform to ABNF notation as defined in RFC2234, substitute the single-quote symbol with a double-quote symbol in the above rules.) A zero length of UbiLocationSpecifier is object-specific and must be defined as part of the description of any object which uses this syntax." REFERENCE "RFC2234, Augmented BNF for syntax specifications: ABNF" SYNTAX OCTET STRING (SIZE (0..255)) UbiInetAddressMask ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Denotes a generic Internet subnet address mask. The Internet subnet address mask is represented as the number of contiguous 1-bit from MSB (most significant bit) of the Internet subnet address mask. A UbiInetAddressMask value is always interpreted within the context of an InetAddressType value. The InetAddressType only object or InetAddressType with InetAddress objects which define the context must be registered immediately before the object which uses the UbiInetAddressMask textual convention. In other words, the object identifiers for the InetAddressType object and the UbiInetAddressMask object MUST have the same length and the last sub-identifier of the InetAddressType object MUST be 1 less than the last sub-identifier of the UbiInetAddressMask object and MUST be 2 less than the last sub-identifier of the UbiInetAddressMask object if an InetAddress object is defined between InetAddressType and UbiInetAddressMask objects. The maximum value of the UbiInetAddressMask TC is 32 for the value 'ipv4(1)' in InetAddressType object and 128 for the value 'ipv6(2)' in InetAddressType object. The value zero is object-specific and must therefore be defined as part of the description of any object which uses this syntax. Examples of the usage of zero might include situations where Internet subnet mask was unknown, or when none subnet masks need to be referenced." REFERENCE "RFC2851, Textual Conventions for Internet Network Addresses." SYNTAX Unsigned32 (0..128 ) UbiAbsZeroBasedCounter32 ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This TC describes an object which counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, it locks at the maximum value of 4,294,967,295 if the counter overflows. This TC may be used only in situations where wrapping is not possible or extremely unlikely situation." SYNTAX Gauge32 UbiSnapShotAbsCounter32 ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This TC describes an object which stores a snap-shot value with the following semantics: objects of this type will take a snap-shot value from their associated UbiAbsZeroBasedCounter32 type objects on creation." SYNTAX Unsigned32 UbiAlarmSeverity ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the perceived alarm severity associated with a service or safety affecting condition and/or event. These are based on ITU severities, except that info(7) is added. cleared(1) - Indicates a previous alarm condition has been cleared. It is not required (unless specifically stated elsewhere on a case by case basis) that an alarm condition that has been cleared will produce a notification or other event containing an alarm severity with this value. indeterminate(2) - Indicates that the severity level cannot be determined. critical(3) - Indicates that a service or safety affecting condition has occurred and an immediate corrective action is required. major(4) - Indicates that a service affecting condition has occurred and an urgent corrective action is required. minor(5) - Indicates the existence of a non-service affecting condition and that corrective action should be taken in order to prevent a more serious (for example, service or safety affecting) condition. warning(6) - Indicates the detection of a potential or impending service or safety affecting condition, before any significant effects have been felt. info(7) - Indicates an alarm condition that does not meet any other severity definition. This can include important, but non-urgent, notices or informational events." REFERENCE "ITU-X.733" SYNTAX INTEGER { cleared(1), indeterminate(2), critical(3), major(4), minor(5), warning(6), info(7) } PerfHighIntervalCount ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A 64 bit counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. This definition is based on CounterBasedGauge64 TEXTUAL CONVENTION defined in RFC2856. The PerfHighIntervalCount type represents a non-negative integer, which may increase or decrease, but shall never exceed a maximum value, nor fall below a minimum value. The maximum value can not be greater than 2^64-1 (18446744073709551615 decimal), and the minimum value can not be smaller than 0. The value of a PerfHighIntervalCount, has its maximum value whenever the information being modeled is greater than or equal to its maximum value, and has its minimum value whenever the information being modeled is smaller than or equal to its minimum value. If the information being modeled subsequently decreases below (increases above) the maximum (minimum) value, the PerfHighIntervalCount also decreases (increases). Note that this TC is not strictly supported in SMIv2, because the 'always increasing' and 'counter wrap' semantics associated with the Counter64 base type are not preserved. It is possible that management applications which rely solely upon the (Counter64) ASN.1 tag to determine object semantics will mistakenly operate upon objects of this type as they would for Counter64 objects. This textual convention represents a limited and short-term solution, and may be deprecated as a long term solution is defined and deployed to replace it." REFERENCE "RFC 2856(HCNUM-TC MIB). RFC 2493(PerfHist-TC-MIB)." SYNTAX Counter64 ConfigIterator ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This object type is a control object type which applies to writable objects in the same SNMP PDU related to the same table containing those objects. It controls an operation which repeatedly applies the specified configuration data to more than one rows in a table. The operation starts from the row specified by the index of the instance and repeats for the number of rows as the value of the object. ConfigIterator object needs to be accompanied by one set of writable objects which are of the same instance to apply to. For example, a SNMP PDU contains { objectA.10 = 1, objectB.10 = 'E1', objectC.10 = 44, objectRepetition.10 = 100 } The SYNTAX of objectRepetition is ConfigIterator. This will apply value 1 to objectA, value 'E1' to objectB, value 44 to objectC in the table starting from row 10 repeatedly for 100 rows. The iteration is based on the number of rows, not based on the value of the index. For sparse tables, the index 10, 20, 30, 110, and 120 counts for 5 rows, the operation will go beyond index 100 in the previous SNMP PDU example. The iteration will stop prematurely when it comes to the following situations: (1) When the number of the rows in the table is less than the designated row indicated by the ConfigIterator object. (2) When it encounters the first error in any row, the operation won't continue to next row. The operation of ConfigIterator object applies only to the writable objects having the same index as the ConfigIterator object in one SNMP PDU. For example, a SNMP PDU contains { objectD.5 = 38, objectE.6 = 'T1', objectF.5 = 'false', objectIterator.5 = 10 } The SYNTAX of objectIterator is ConfigIterator. This will apply value 38 to objectD, value 'false' to objectF in the table starting from row 5 repeatedly for 10 rows. Since the object objectE.6 has different index (6) from the index of objectIterator, the repetition won't be applied to it. However the value of objectE in the row 6 will be set to 'T1' according to regular SNMP SET orperation. If there is row overlapping of the iteration in a SNMP PDU, it will be operated as they are in two different SNMP PDUs. For example, a SNMP PDU contains { objectD.5 = 38, objectD.6 = 40, objectE.6 = 'T1', objectF.5 = 'false', objectIterator.5 = 10 objectIterator.6 = 10 } This will apply value 38 to objectD, value 'false' to objectF starting from row 5 repeatedly for 10 rows, and apply value 40 to objectD, value 'T1' to objectE starting from row 6 repeatedly for 10 rows. The final value of objectD.6 can be 38 or 40, it depends on the SNMP stack of the system starts SNMP SET for the row 5 before the row 6 or the other way around. The object defined as ConfigIterator will be set to value 1 after the iteration operation is kick-off regardless the system has completed the operation to the designated rows or not. Therefore retrieving the value of this object is meaningless. It acts as the one time operation for bulk configuration. The object defined as ConfigIterator has no meaning by itself, it has to be combined with one or more than one writable objects from the same table and within the same SNMP PDU for the repetition operation. For example, a SNMP PDU contains { objectG.2 = 49, objectH.2 = 'AE'h objectIterator.4 = 20 } The SYNTAX of objectIterator is ConfigIterator. Since there are no objects having the same index as the index of objectIterator in the PDU, the result of this SNMP operation will set value 49 to objectG and value 0xAE to objectH of the row 2 only as regular SNMP SET operation. The index of the instance indicates the starting row for the iteration. The order of the iteration depends, for instance, on: (1) physical hardware position, or (2) logical index. It depends on the characters of the table which contains the ConfigIterator object. Iteration can be done through some or all the components of the index for a table. The description of the iterator object in that table should describe which part of the index the iteration is applied to. The operation for this object type is based on the best effort. When the agent receives a SNMP PDU containing this data type, the return status of the SNMP request reflects only the result of the SET operation has applied to the starting row. It may return a SNMP response with SUCCESS status regardless the number of rows for the data actually been deployed later on. Therefore it is possible the data might not be completely deployed to the number of rows designated by the ConfigIterator and the operation stops prematurely due to an error it first encounters after n rows (n < the value of ConfigIterator object). Usually the error report mechanism for this type of operation is accomplished by combining this type of object with the other two objects in the same table: (1) An OwnerString object (2) An object indicates the result of the operation. When issuing this bulk configuration request, the SNMP manager should provide its identifier in (1) object. After issuing the request, it should check the value of (1) object if it is the same with it own name. If they are the same, then the value of the object presents in (2) is the result from the previous operation from this manager. Otherwise, another SNMP manager might issue the bulk configuration to the same table before the previous bulk operation has been completed. These two objects will represent the last bulk operation in the table." SYNTAX Unsigned32 (1..4294967295 ) BulkConfigResult ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This textual convention defines the format of the displayable textual result from the bulk configuration operation specified as ConfigIterator type. The format should be: 'COMPLETION= error occured>/, ERROR=/: ' For example: 'COMPLETION=22/100,ERROR=38/44:Invalid Ds1 line coding for the line type'" SYNTAX OCTET STRING (SIZE (0..255)) ListIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A unique value greater than zero, for each of the list that is defined. The object using this convention should give all the object specific details including the list type." SYNTAX Integer32 (1..2147483647 ) ListIndexOrZero ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This textual convention is an extension of the ListIndex. In addition to the ListIndex range, this also includes 0 in its range of values. This value could be object specific and should be given the description of that object. In most cases, a value 0 means that the it does not represent any lists." SYNTAX Integer32 (0..2147483647 ) TimeIntervalSec ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A period of time, measured in units of 1 second." SYNTAX Unsigned32 TimeIntervalMin ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A period of time, measured in units of 1 minute." SYNTAX Unsigned32 UbiMilliSeconds ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents time unit value in milliseconds." SYNTAX Unsigned32 MicroSeconds ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents time unit value in microseconds." SYNTAX Unsigned32 UbiPortList ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Each octet within this value specifies a set of eight ports. The object defined by this textual convention can specify a port range of 2k ports in its description. Example: 1 - 2048, 2049 - 4096, etc. The first octet represents the first 8 ports of the range of ports specified by the object, the second octet represents the next 8 ports, etc. When a port range is not specified, a default port range of '1 - 2048' is assumed. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. Note that if the length of this string is less than 256 octets, any 'missing' octets are assumed to contain the value zero. An NMS may omit any zero-valued octets from the end of this string in order to reduce SetPDU size, and the agent may also omit zero-valued trailing octets, to reduce the size of GetResponse PDUs." SYNTAX OCTET STRING (SIZE (0..256)) UbiPortListRange ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates the port range. oneto2K(1) indicates that the port number range is from 1 to 2048. twoKto4K(2) indicates that the port number range is from 2049 to 4096. fourKto6K(3) indicates that the port number range is from 4097 to 6144. sixKto8K(4) indicates that the port number range is from 6145 to 8192. eightKto10K(5) indicates that the port number range is from 8193 to 10240. tenKto12K(6) indicates that the port number range is from 10241 to 12288. twelveKto14K(7) indicates that the port number range is from 12289 to 14336. fourteenKto16K(8) indicates that the port number range is from 14337 to 16384. When an object is defined with this textual convention, it must be accompanied by an object of UbiPortList syntax." SYNTAX INTEGER { oneto2k(1), twoKto4K(2), fourKto6K(3), sixKto8K(4), eightKto10K(5), tenKto12K(6), twelveKto14K(7), fourteenKto16K(8) } IfOperStatusReason ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The cause of current operational state of the interface. GLOSSARY: BB - Buffer-to-Buffer. BB_Credit - Buffer-to-Buffer credit, a link level flow control mechanism. B_Port - A Fibre Channel, Bridging port. Class F - A connectionless service with notification on non-delivery between E_Ports, used for control, coordination, and configuration of the Fabric. Class N - Refers to any class of service (different types of frame delivery services) other than Class F. E_D_TOV - Error Detect Timeout Value. ELP - Exchange Link Parameter. E-mode - A fibre channel port providing E_Port functionality. E_Port - A Fabric Expansion Port. EPP - Exchange Peer Parameters. ESC - Exchange Switch Capabilities. Fabric - The set of physically connected fibre channel switches. FC-FS - Fibre Channel Framing and Signaling. FCIP - Fibre Channel over IP protocol. FCOT - Fibre channel optical transmitter. FC-PH - The Fibre Channel Physical and Signaling standard. FCSP - Fibre Channel Security Protocol. Fibre Channel - The primary protocol for building SANs. FICON - An I\O protocol used between IBM (and compatible) mainframes and storage. FLOGI - Fabric Login, used by a node port to establish a session with the fabric. GBIC - Gigabit Interface Converter; a removable transceiver module permitting Fibre Channel and Gigabit Ethernet physical-layer transport. Interconnect_Ports - Switch Ports that assume either the E_Port or B_Port mode are generally referred to as Interconnect_Ports. LIP - Loop Initialization Primitive sequence. LR - Link Reset, the FC-PH defined primitive sequence used to initiate a link reset. NOS - Not Operational Sequence, the FC-PH defined primitive sequence to indicate that the transmitting port has detected a link failure (or) offline condition. Nx_Port - A Fiber Channel Node Port. OLS - Offline Sequence, the FC-PH defined primitive sequence to indicate that the port is entering into offline state. OHMS - Online Health Management System. R_A_TOV - Resource Allocation Timeout Value. RCF - Reconfigure Fabric. Rxbbcredit - Receive BB credit value configured for a FC interface. SAN - Storage Area Network; a network linking computing devices to disk or tape arrays and other devices over Fibre Channel. TE_Port - Trunking E_Port. TOV - Time out value. VSAN - Virtual Storage Area Network. WWN - World Wide Name. xE_Port - A Fiber channel port that can assume either E_Port or TE_Port mode. The enumerated values which provides the cause of the current operational state of the interface are, 'other(1)' - reasons other than defined here. 'none(2)' - no failure. 'hwFailure(3)' - hardware failure. 'loopbackDiagFailure(4)' - loopback diagnostics failure. 'errorDisabled(5)' - the port is not operational due to some error conditions that require administrative attention. 'swFailure(6)' - software failure. 'linkFailure(7)' - physical link failure. 'offline(8)' - physical link is in offline state as defined in the FC-FS standards. 'nonParticipating(9)' - during loop initialization, the port is not allowed to participate in loop operations. 'initializing(10)' - port is being initialized. 'vsanInactive(11)'- port VSAN is inactive. The port becomes operational again when the port VSAN is active. 'adminDown(12)' - ifAdminStatus is 'down'. 'channelAdminDown(13)' - this port is a member of a port channel and that port channel's ifAdminStatus is 'down'. 'channelOperSuspended(14)' - this port is a member of a port channel and its operational parameters are incompatible with the port channel parameters. 'channelConfigurationInProgress(15)' - this port is undergoing a port channel configuration. 'rcfInProgress(16)' - an isolated xE_port is transmitting an reconfigure fabric, requesting a disruptive reconfiguration in an attempt to build a single, non-isolated fabric. Only the Interconnect_Ports can become isolated. 'elpFailureIsolation(17)' - during a port initialization the prospective Interconnect_Ports find incompatible link parameters. 'escFailureIsolation(18) - during a port initialization the prospective Interconnect_Ports are unable to proceed with initialization as a result of ESC. 'domainOverlapIsolation(19)' - there is a overlap in domains while attempting to connect two existing fabrics. 'domainAddrAssignFailureIsolation(20)' - the elected principal switch is not capable of performing domain address manager functions so no Nx_port traffic can be forwarded across switches, hence all Interconnect_Ports in the switch are isolated. 'domainOtherSideEportIsolation(21)' - the peer E_port is isolated. 'domainInvalidRcfReceived(22)' - invalid RCF received. 'domainManagerDisabled(23) - domain manager is disabled. 'zoneMergeFailureIsolation(24)' - the two Interconnect_Ports cannot merge zoning configuration after having exchanged merging request for zoning. 'vsanMismatchIsolation(25)' - this VSAN is not configured on both sides of a trunk port. 'parentDown(26)' - the physical port to which this interface is bound is down. 'srcPortNotBound(27)'- no source port is specified for this interface. 'interfaceRemoved(28)' - interface is being removed. 'fcotNotPresent(29)' - FCOT (GBIC) not present. 'fcotVendorNotSupported(30)' - FCOT (GBIC) vendor is not supported. 'incompatibleAdminMode(31)' - port administrative mode is incompatible with port capabilities. 'incompatibleAdminSpeed(32)' - port speed is incompatible with port capabilities. 'suspendedByMode(33)' - port that belongs to a port channel is suspended due to incompatible operational mode. 'suspendedBySpeed(34)' - port that belongs to a port channel is suspended due to incompatible operational speed. 'suspendedByWwn(35)' - port that belongs to a port channel is suspended due to incompatible remote switch WWN. 'domainMaxReTxFailure(36)' - domain manager failure after maximum retries. 'eppFailure(37)' - trunk negotiation protocol failure after maximum retries. 'portVsanMismatchIsolation(38)' - an attempt is made to connect two switches using non-trunking ports having different port VSANs. 'loopbackIsolation(39)' - port is connected to another port in the same switch. 'upgradeInProgress(40)' - linecard upgrade in progress. 'incompatibleAdminRxBbCredit(41)' - receive BB credit is incompatible. " SYNTAX OCTET STRING (SIZE (0..256)) ------------------------------------------------------------------ -- The fllowing was defined in UBQS_QOS_PIB_MIB ------------------------------------------------------------------ -- Percentage for thresholds, etc. -- Percent ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An integer that is in the range of a percent value." SYNTAX INTEGER (0..100) -- DiffServ Codepoint -- Dscp ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An integer that is in the range of the DiffServ codepoint values." SYNTAX INTEGER (0..63) ------------------------------------------------------------------ -- The fllowing was defined in UBQS_ST_TC_MIB ------------------------------------------------------------------ FcNameIdOrZero ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The World Wide Name (WWN) associated with a Fibre Channel (FC) entity. WWNs were initially defined as 64-bits in length. The latest definition (for future use) is 128-bits long. The zero-length string value is used in circumstances where the WWN is unassigned/unknown." SYNTAX OCTET STRING (SIZE(0 | 8 | 16)) ------------------------------------------------------------------ -- The fllowing was defined in UBQS-FRAME-RELAY-MIB ------------------------------------------------------------------ DlciNumber ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Numerical format of Data Link Connection Identifier (DLCI) in decimal, identical to the 'DLCI' as INTEGER of 0..DLCINumber in RFC1315. The maximum value depends on Frame Relay implementation, which is currently set to be 1023 for 2-octet address format per UNI Implementation Agreement FRF.1." SYNTAX INTEGER (0..1023) END