UHP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, IpAddress, Integer32, enterprises, Counter32, Gauge32 FROM SNMPv2-SMI DisplayString FROM SNMPv2-TC; uhpV32 MODULE-IDENTITY LAST-UPDATED "201811021200Z" ORGANIZATION "UHP Networks" CONTACT-INFO "www.uhp.net" DESCRIPTION "UHP terminal MIB" REVISION "201810251200Z" DESCRIPTION "UHP terminal MIB" ::= { uhp 22 } uhp OBJECT IDENTIFIER ::= { enterprises 8000 } control OBJECT IDENTIFIER ::= { uhpV32 1 } demod1 OBJECT IDENTIFIER ::= { uhpV32 2 } demod2 OBJECT IDENTIFIER ::= { uhpV32 3 } modulator OBJECT IDENTIFIER ::= { uhpV32 4 } tdma OBJECT IDENTIFIER ::= { uhpV32 5 } router OBJECT IDENTIFIER ::= { uhpV32 6 } shaper OBJECT IDENTIFIER ::= { uhpV32 7 } system OBJECT IDENTIFIER ::= { uhpV32 8 } mobile OBJECT IDENTIFIER ::= { uhpV32 9 } -- Control saveConfig OBJECT-TYPE SYNTAX INTEGER { nosave(0), save0(1), save1(2), save2(3), save3(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Save current profile to EEPROM profile 0-3. Profile 0 is automativally loaded on restart by default." ::= { control 1 } reboot OBJECT-TYPE SYNTAX INTEGER { noreboot(1), reboot(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reboot device immediately." ::= { control 2 } command OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Issue a command to command-line interface." ::= { control 3 } configEdit OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Profile or global config editing and viewing Complex input format, only for manufacturer." ::= { control 4 } profile OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Get current profile or run specified profile (1-8)." ::= { control 5 } -- Demod1 lbandSNR1 OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Signal to noise ratio at L-band demodulator input measured in 0.1 dB units." ::= { demod1 1 } lbandOffset1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frequency offset value in KHz between PLL frequency and carrier real frequency." ::= { demod1 2 } inLvl1 OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current input level x -10dBm" ::= { demod1 3 } inBytes1 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Demodulator1 traffic in bytes (indexed by ACM channel)" ::= { demod1 4 } -- Demod2 lbandSNR2 OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Signal to noise ratio at L-band demodulator input measured in 0.1 dB units." ::= { demod2 1 } lbandOffset2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frequency offset value in KHz between PLL frequency and carrier real frequency." ::= { demod2 2 } inLvl2 OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current input level x -10dBm" ::= { demod2 3 } inBytes2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Demodulator2 traffic in bytes (indexed by ACM channel)" ::= { demod2 4 } -- Modulator prioAll OBJECT IDENTIFIER ::= { modulator 1 } outBytesA OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator traffic in bytes (indexed by ACM channel)" ::= { prioAll 1 } outPktsA OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator traffic in packets (indexed by ACM channel)" ::= { prioAll 2 } dropsA OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator dropped packets (indexed by ACM channel)" ::= { prioAll 3 } queueLenBA OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator queue length in bytes (indexed by ACM channel)" ::= { prioAll 4 } queueLenPA OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator queue length in packets (indexed by ACM channel)" ::= { prioAll 5 } numStations OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of stations per ACM channel (indexed by ACM channel)" ::= { prioAll 6 } prioP1 OBJECT IDENTIFIER ::= { modulator 2 } outBytesP1 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator P1(Low) priority traffic in bytes (indexed by ACM channel)" ::= { prioP1 1 } outPktsP1 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator P1(Low) priority traffic in packets (indexed by ACM channel)" ::= { prioP1 2 } dropsP1 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator P1(Low) priority dropped packets (indexed by ACM channel)" ::= { prioP1 3 } queueLenBP1 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator P1(Low) priority queue length in bytes (indexed by ACM channel)" ::= { prioP1 4 } queueLenPP1 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator P1(Low) priority queue length in packets (indexed by ACM channel)" ::= { prioP1 5 } prioP4 OBJECT IDENTIFIER ::= { modulator 3 } outBytesP4 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator P4(Med) priority traffic in bytes (indexed by ACM channel)" ::= { prioP4 1 } outPktsP4 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator P4(Med) priority traffic in packets (indexed by ACM channel)" ::= { prioP4 2 } dropsP4 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator P4(Med) priority dropped packets (indexed by ACM channel)" ::= { prioP4 3 } queueLenBP4 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator P4(Med) priority queue length in bytes (indexed by ACM channel)" ::= { prioP4 4 } queueLenPP4 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator P4(Med) priority queue length in packets (indexed by ACM channel)" ::= { prioP4 5 } prioP7 OBJECT IDENTIFIER ::= { modulator 4 } outBytesP7 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator P7(High) priority traffic in bytes (indexed by ACM channel)" ::= { prioP7 1 } outPktsP7 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator P7(High) priority traffic in packets (indexed by ACM channel)" ::= { prioP7 2 } dropsP7 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator P7(High) priority dropped packets (indexed by ACM channel)" ::= { prioP7 3 } queueLenBP7 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator P7(High) priority queue length in bytes (indexed by ACM channel)" ::= { prioP7 4 } queueLenPP7 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator P7(High) priority queue length in packets (indexed by ACM channel)" ::= { prioP7 5 } prioCtrl OBJECT IDENTIFIER ::= { modulator 5 } outBytesC OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator control traffic in bytes (index 1 only)" ::= { prioCtrl 1 } outPktsC OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator control traffic in packets (index 1 only)" ::= { prioCtrl 2 } level OBJECT IDENTIFIER ::= { modulator 6 } txLevel OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current TX level x -10dBm" ::= { level 1 } txLevelDelta OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current TX level delta from set level x -10dBm" ::= { level 2 } txMaxLevel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max TLC level x -10dBm" ::= { level 3 } prioP2 OBJECT IDENTIFIER ::= { modulator 7 } outBytesP2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator P2 priority traffic in bytes (indexed by ACM channel)" ::= { prioP2 1 } outPktsP2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator P2 priority traffic in packets (indexed by ACM channel)" ::= { prioP2 2 } dropsP2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator P2 priority dropped packets (indexed by ACM channel)" ::= { prioP2 3 } queueLenBP2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator P2 priority queue length in bytes (indexed by ACM channel)" ::= { prioP2 4 } queueLenPP2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator P2 priority queue length in packets (indexed by ACM channel)" ::= { prioP2 5 } prioP3 OBJECT IDENTIFIER ::= { modulator 8 } outBytesP3 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator P3 priority traffic in bytes (indexed by ACM channel)" ::= { prioP3 1 } outPktsP3 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator P3 priority traffic in packets (indexed by ACM channel)" ::= { prioP3 2 } dropsP3 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator P3 priority dropped packets (indexed by ACM channel)" ::= { prioP3 3 } queueLenBP3 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator P3 priority queue length in bytes (indexed by ACM channel)" ::= { prioP3 4 } queueLenPP3 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator P3 priority queue length in packets (indexed by ACM channel)" ::= { prioP3 5 } prioP5 OBJECT IDENTIFIER ::= { modulator 9 } outBytesP5 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator P5 priority traffic in bytes (indexed by ACM channel)" ::= { prioP5 1 } outPktsP5 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator P5 priority traffic in packets (indexed by ACM channel)" ::= { prioP5 2 } dropsP5 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator P5 priority dropped packets (indexed by ACM channel)" ::= { prioP5 3 } queueLenBP5 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator P5 priority queue length in bytes (indexed by ACM channel)" ::= { prioP5 4 } queueLenPP5 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator P5 priority queue length in packets (indexed by ACM channel)" ::= { prioP5 5 } prioP6 OBJECT IDENTIFIER ::= { modulator 10 } outBytesP6 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator P6 priority traffic in bytes (indexed by ACM channel)" ::= { prioP6 1 } outPktsP6 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator P6 priority traffic in packets (indexed by ACM channel)" ::= { prioP6 2 } dropsP6 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator P6 priority dropped packets (indexed by ACM channel)" ::= { prioP6 3 } queueLenBP6 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator P6 priority queue length in bytes (indexed by ACM channel)" ::= { prioP6 4 } queueLenPP6 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modulator P6 priority queue length in packets (indexed by ACM channel)" ::= { prioP6 5 } -- Router unroutedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets, router couldn't route anywhere (though they could have been tunneled)." ::= { router 1 } unroutedSource OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Last source IP address of unrouted packet." ::= { router 2 } unroutedDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Last destination IP address of unrouted packet." ::= { router 3 } outVlanBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes, transmitted via VLAN. Requires index, which is VLAN number." ::= { router 4 } inVlanBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes, received via VLAN. Requires index, which is VLAN number." ::= { router 5 } outSvlanBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes, transmitted via SVLAN. Requires index, which is SVLAN number." ::= { router 6 } inSvlanBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes, received via SVLAN. Requires index, which is SVLAN number." ::= { router 7 } inSvlanPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets, received via SVLAN. Requires index, which is SVLAN number." ::= { router 8 } -- TDMA tts OBJECT IDENTIFIER ::= { tdma 1 } inroute OBJECT IDENTIFIER ::= { tdma 2 } server OBJECT IDENTIFIER ::= { tdma 3 } remTable OBJECT IDENTIFIER ::= { tdma 4 } station OBJECT IDENTIFIER ::= { tdma 5 } -- TTS tdelta OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "HUB/Outroute - TTS value Inroute/remote - Timers delta between local station and hub In 10MHz ticks. Developers only" ::= { tts 1 } tdtConfidence OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "HUB/Outroute - TTS confidence value 0-64 Inroute/remote - Tdelta confidence 0-64" ::= { tts 2 } softErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of soft errors of TTS/Tdelta measurement algorithm. Soft errors mean current value is outside averaged window." ::= { tts 3 } hardErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of hard errors of TTS/Tdelta measurement algorithm." ::= { tts 4 } hubTTS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "HUB TTS value in 10MHz ticks" ::= { tts 5 } hubTTSconfidence OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "HUB TTS confidence value 0-64. It is requested from remotes or inroutes" ::= { tts 6 } remoteTTS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Remote TTS value with compensations in 10MHz ticks. Developers only" ::= { tts 7 } -- Inroute netState OBJECT-TYPE SYNTAX INTEGER { off(0), init(1), noConfig(2), useConfig(3), redundant(4), startRX(5), cotmPointing(6), startHubTX(7), noRX(8), identify(9), getNetConfig(10), calcDelays(11), startTDMA(12), startTX(13), acquisition(14), adjustment(15), noStations(16), operation(17) } MAX-ACCESS read-only STATUS current DESCRIPTION "Operation sequence level" ::= { inroute 1 } frameDelay OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Delay in frames between TX and RX processing. Developers only" ::= { inroute 2 } sectionBW OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bandwidth in Bits/second of single slot in frame" ::= { inroute 3 } netRequest OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sum of all requests of all stations (slots)" ::= { inroute 4 } freeSlots OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of free-allocated slots in current frame" ::= { inroute 5 } netLoad OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Network load in % (values, greater than 100% mean overload)" ::= { inroute 6 } -- Server serverStatus OBJECT-TYPE SYNTAX INTEGER { off(0), init(1), noConfig(2), useConfig(3), redundant(4), startRX(5), cotmPointing(6), startHubTX(7), noRX(8), identify(9), getNetConfig(10), calcDelays(11), startTDMA(12), startTX(13), acquisition(14), adjustment(15), noStations(16), operation(17) } MAX-ACCESS read-only STATUS current DESCRIPTION "Server reply status" ::= { server 1 } frameDuration OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frame duration in 10M ticks" ::= { server 2 } -- Remotes statistics table ( No SNMP_NEXT, direct remotes 1-252 addressing by index) rxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Summary number of bytes, received from this remote" ::= { remTable 1 } p1Bytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of P1(Low) priority bytes, received from this remote" ::= { remTable 2 } p4Bytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of P4(Med) priority bytes, received from this remote" ::= { remTable 3 } p7Bytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of P7(High) priority bytes, received from this remote" ::= { remTable 4 } crcErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of CRC errors, during reception of this remote" ::= { remTable 5 } carrierToNoise OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Receive carrier-to-noise ratio of this remote in 0.1 dB steps" ::= { remTable 6 } freqOffset OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Receive Frequency offset of this remote in Hz" ::= { remTable 7 } remRecvHub OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "How this remote receives the hub in 0.1 dB steps" ::= { remTable 8 } linkState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), off(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Link state of this remote" ::= { remTable 9 } lastHeard OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Time in seconds since last burst was received from remote. Developers only" ::= { remTable 10 } downTimes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "How many times remote changed state to DOWN" ::= { remTable 11 } totalRequest OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current non-real-time + real-time request from remote" ::= { remTable 12 } nrtRequest OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current non-real-time request from remote" ::= { remTable 13 } rtmRequest OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current real-time request from remote" ::= { remTable 14 } currentFP OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of sections, allocated in current frame plan for remote" ::= { remTable 15 } txLvl OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current transmit level x -0.1 dBm (1:360 -> -0.1:-36 dBm)" ::= { remTable 16 } faults OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Station faults bitmap: 1-service monitoring local warning (LWRN);2-service monitoring local alarm (LFLT);4-service monitoring network warning (NWRN);8-service monitoring network alarm (NFLT);0x10 system fault (SYST);0x20 reboot fault (REBT);0x40 LAN down (LAN);0x80 RX offset fault (OFFS);0x100 CRC errors (CRC);0x200 TLC fault (TLC)" ::= { remTable 17 } p2Bytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of P2 priority bytes, received from this remote" ::= { remTable 18 } p3Bytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of P3 priority bytes, received from this remote" ::= { remTable 19 } p5Bytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of P5 priority bytes, received from this remote" ::= { remTable 20 } p6Bytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of P6 priority bytes, received from this remote" ::= { remTable 21 } -- Station data stationState OBJECT-TYPE SYNTAX INTEGER { off(0), init(1), noConfig(2), useConfig(3), redundant(4), startRX(5), cotmPointing(6), startHubTX(7), noRX(8), identify(9), getNetConfig(10), calcDelays(11), startTDMA(12), startTX(13), acquisition(14), adjustment(15), noStations(16), operation(17) } MAX-ACCESS read-only STATUS current DESCRIPTION "Remote initialization sequence level" ::= { station 1 } remnrtRequest OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Request for non-real-time bandwidth in sections" ::= { station 2 } remrtRequest OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Request for real-time bandwidth in sections" ::= { station 3 } fpLost OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Lost frame plans number" ::= { station 4 } lvlOffset OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Offset between reference level and C/N level on hub. Developers only" ::= { station 5 } lvlAdjust OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "TX power level adjustment value in 0.1 dB steps" ::= { station 6 } frqOffset OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frequency offset on hub. Developers only" ::= { station 7 } frqAdjust OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "TX frequency adjustment value in Hz. Developers only" ::= { station 8 } timeOffset OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timing offset on hub in symbols" ::= { station 9 } timeAdjust OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "TX timing adjustment value in 10M ticks" ::= { station 10 } -- Traffic Shaper stats ( No SNMP_NEXT, direct stream 0-500 addressing by index) streamSpeed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current speed in Kbits per second of current stream" ::= { shaper 1 } streamP1Speed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current speed in Kbits per second of P1(Low) priority sub-stream" ::= { shaper 2 } streamP4Speed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current speed in Kbits per second of P4(Med) priority sub-stream" ::= { shaper 3 } streamP7Speed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current speed in Kbits per second of P7(High) priority sub-stream" ::= { shaper 4 } streamDelay OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current packets delay in stream x 0.1s" ::= { shaper 5 } streamQueue OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current stream queue length in bytes" ::= { shaper 6 } streamP2Speed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current speed in Kbits per second of P2 priority sub-stream" ::= { shaper 7 } streamP3Speed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current speed in Kbits per second of P3 priority sub-stream" ::= { shaper 8 } streamP5Speed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current speed in Kbits per second of P5 priority sub-stream" ::= { shaper 9 } streamP6Speed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current speed in Kbits per second of P6 priority sub-stream" ::= { shaper 10 } -- System stats temperature OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current temperature" ::= { system 1 } cpuLoad OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current CPU load in percent" ::= { system 2 } buffers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current buffers usage in percent" ::= { system 3 } redundancy OBJECT-TYPE SYNTAX INTEGER { idle(0), backup(1), faults(2), trying(3), active(4), off(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current redundancy state" ::= { system 4 } swVersion OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Software version. Four numbers of version contained in four bytes in order of precedence (see as hexadecimal)." ::= { system 5 } releaseDate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Release date. Two low bytes of number contain year, then month and day (see as hexadecimal)." ::= { system 6 } -- Mobile version OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Software (protocol) version. Number 10 means V1.0" ::= { mobile 1 } serialNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Serial number of this unit. If printed on the screen should be printed as hexadecimal! Example - 4660 returned should be printed as 1234 in hex." ::= { mobile 2 } inputLevel OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Input baseband RF level in -0.1dBm steps. 500 means -50 dBm. Higher value means lower level. 800 (-80dBm) means no signal." ::= { mobile 3 } rxState OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Composite value to provide controller with receive and overall state. 0 means no RX lock. 1 means absence of coordinates (send location data). 2 means absence of TX status (send TX control command). 3-250 means RX lock and shows demodulator C/N level in 0.1dBm steps (e.g. 100 means C/N=10 dB). Actual in all modes of operation. In SCPC/Star modes shows SCPC demodulator level, in FullMesh mode burst demodulator level." ::= { mobile 4 } searchState OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "GET Value in percent (0-100) of current carrier search sequence. As search for narrow (<1Msps) carrier with high offset (DRO LNB) can last up-to 30 seconds, controller can wait until the whole acquisition bandwidth is scanned at least once. SET Writing any value restarts search cycle." ::= { mobile 5 } txControl OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "GET Current TX status (0-off, 1-on). SET Writing 0 turns TX off, 1 - turns on." ::= { mobile 6 } location OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "GET Not applicable. SET NMEA RMC string $GPRMC,hhmmss.ss,A,GGMM.MM,P,gggmm.mm,J,v.v,b.b,ddmmyy,x.x,n,m*hh Location should be re-supplied if changed more than 1 minute by any coordinate." ::= { mobile 7 } END