VEL-HOST2-MIB DEFINITIONS ::= BEGIN

IMPORTS
	vel					FROM VEL-MIB
	DisplayString		FROM RFC1213-MIB
	TRAP-TYPE           FROM RFC-1215
	MODULE-IDENTITY, OBJECT-TYPE
						FROM SNMPv2-SMI;
		
host2 MODULE-IDENTITY
	LAST-UPDATED	"201508121000Z"
	ORGANIZATION	"Vigintos Elektronika"
	CONTACT-INFO   	"Contact:

                	Web: http://www.vigintos.com
                	Email: ve@vigintos.com
    
                	Address: Ozo 4, Vilnius, LT-08200, Lithuania
                	Tel:	+37052477465
                	Fax:	+37052477466"

	DESCRIPTION		"This is the MIB file of Host Controller 2."

	REVISION		"201303070800Z"
	
	DESCRIPTION		"Host Controller 2 MIB File."
              
	::= {vel 5}
	
host2Name OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
				"Host Controller name."
	::= {host2 1}
	
host2Version OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
				"Host Controller version"
	::= {host2 2}
	
host2LoaderVersion OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
				"Host Controller loader version"
	::= {host2 3}
	
--	************ Host Command Table ***************************	
	
host2CmdTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF Host2CmdEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
				"A list of Host Controller command entries."
	::= {host2 4}

	host2CmdEntry OBJECT-TYPE
		SYNTAX		Host2CmdEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
					"An entry of Host Controller commands."
		INDEX		{ host2CmdIndex }
		::= {host2CmdTable 1}

		Host2CmdEntry ::= SEQUENCE {
			host2CmdIndex	INTEGER,
 			host2CmdName	DisplayString,
 			host2CmdExecute	INTEGER
 			}

 		host2CmdIndex OBJECT-TYPE
 			SYNTAX		INTEGER(1..255)
 			MAX-ACCESS	read-only
 			STATUS		current
 			DESCRIPTION
 						"An id for each command."
 			::= {host2CmdEntry 1}

 		host2CmdName OBJECT-TYPE
 			SYNTAX		DisplayString(SIZE(0..255))
 			MAX-ACCESS	read-only
 			STATUS		current
 			DESCRIPTION
 						"The name of a command."
 			::= {host2CmdEntry 2}

 		host2CmdExecute OBJECT-TYPE
 			SYNTAX		INTEGER {no(0), yes(1)}
 			MAX-ACCESS	read-write
 			STATUS		current
 			DESCRIPTION
 						"Instructions to execute the command of host.
						If value no(0) is sent, the command will not be executed.
						If value yes(1) is sent, the command will be executed."
 			::= {host2CmdEntry 3}

--	************ End Host Command Table ***********************

--	************ History **************************************	

host2HistoryTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF Host2HistoryEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
				"A list of Host Controller history entries."
	::= {host2 5}
	
	host2HistoryEntry OBJECT-TYPE
		SYNTAX		Host2HistoryEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
					"An entry of Host Controller history."
		INDEX		{ host2HisIndex }
		::= {host2HistoryTable 1}
		
		Host2HistoryEntry ::= SEQUENCE {
			host2HisIndex	INTEGER,
			host2HisRecord	DisplayString
			}
			
		host2HisIndex OBJECT-TYPE
			SYNTAX		INTEGER(1..1008)
			MAX-ACCESS	read-only
			STATUS		current
			DESCRIPTION
						"Unique index for each event."
			::= {host2HistoryEntry 1}
			
		host2HisRecord OBJECT-TYPE
			SYNTAX		DisplayString(SIZE(0..255))
			MAX-ACCESS	read-only
			STATUS		current
			DESCRIPTION
						"The text description of an event."
			::= {host2HistoryEntry 2}

--	************ End History **********************************

--	************ Devices **************************************

--	************ Device Attributes ***************************

host2DevAttrTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF Host2DevAttrEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
				"A list of device attributes entries."
	::= {host2 6}
	
	host2DevAttrEntry OBJECT-TYPE
		SYNTAX		Host2DevAttrEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
					"An entry of device attributes."
		INDEX		{host2DevIndex}
		::= {host2DevAttrTable 1}

		Host2DevAttrEntry ::= SEQUENCE {
			host2DevIndex		INTEGER,
			host2DevLocalAddr	INTEGER,
			host2DevTypeNumber	INTEGER,
			host2DevLanState	INTEGER
			}
			
		host2DevIndex OBJECT-TYPE
			SYNTAX		INTEGER(1..14)
			MAX-ACCESS	read-only
			STATUS		current
			DESCRIPTION
						"Unique ID for each device."
			::= {host2DevAttrEntry 1}
			
		host2DevLocalAddr OBJECT-TYPE
			SYNTAX		INTEGER(2..15)
			MAX-ACCESS	read-only
			STATUS		current
			DESCRIPTION
						"Local address for each device."
			::= {host2DevAttrEntry 2}
			
		host2DevTypeNumber OBJECT-TYPE
			SYNTAX		INTEGER(0..65535)
			MAX-ACCESS	read-only
			STATUS		current
			DESCRIPTION
						"Number of type for each device."
			::= {host2DevAttrEntry 3}
			
		host2DevLanState OBJECT-TYPE
			SYNTAX		INTEGER{disconnected(0), connected(1)}
			MAX-ACCESS	read-only
			STATUS		current
			DESCRIPTION
						"Network connection state for each device."
			::= {host2DevAttrEntry 4}

--	************ End Device Attributes ***********************

--	************ Textual Data Table ***********************************

host2DevTxtTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF Host2DevTxtEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
				"A list of textual data that are read from the devices.
				If device is disconnected, there is no entry for this device in the table."
	::= {host2 7}

	host2DevTxtEntry OBJECT-TYPE
		SYNTAX		Host2DevTxtEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
					"An entry of textual data of devices."
		INDEX		{host2DevIndex, host2DevTxtIndex}
		::= {host2DevTxtTable 1}
			
		Host2DevTxtEntry ::= SEQUENCE {
			host2DevTxtIndex	INTEGER,
			host2DevTxtName		DisplayString,
			host2DevTxtValue	DisplayString
			}
			
		host2DevTxtIndex OBJECT-TYPE
			SYNTAX		INTEGER(1..255)
			MAX-ACCESS	read-only
			STATUS		current
			DESCRIPTION
						"Unique ID for each textual data of device."
			::= {host2DevTxtEntry 1}
			
		host2DevTxtName OBJECT-TYPE
			SYNTAX		DisplayString(SIZE(0..255))
			MAX-ACCESS	read-only
			STATUS		current
			DESCRIPTION
						"The description of textual data of device."
			::= {host2DevTxtEntry 2}
			
		host2DevTxtValue OBJECT-TYPE
			SYNTAX		DisplayString(SIZE(0..255))
			MAX-ACCESS	read-only
			STATUS		current
			DESCRIPTION
						"The value of textual data of device."
			::= {host2DevTxtEntry 3}
			
--	************ End Textual Data Table *******************************

--	************ Event Table ****************************************

host2DevEvtTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF Host2DevEvtEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
				"A list of events of devices entries.
				If device is disconnected, there is no entry for this device in the table."
	::= {host2 8}

	host2DevEvtEntry OBJECT-TYPE
		SYNTAX		Host2DevEvtEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
					"An entry of events of devices."
		INDEX		{host2DevIndex, host2DevEvtIndex}
		::= {host2DevEvtTable 1}

		Host2DevEvtEntry ::= SEQUENCE {
			host2DevEvtIndex	INTEGER,
			host2DevEvtName		DisplayString,
			host2DevEvtType		INTEGER,
			host2DevEvtState	INTEGER
			}

			host2DevEvtIndex OBJECT-TYPE
				SYNTAX		INTEGER(1..255)
				MAX-ACCESS	read-only
				STATUS		current
				DESCRIPTION
						"Id for each event."
				::= {host2DevEvtEntry 1}

			host2DevEvtName OBJECT-TYPE
				SYNTAX		DisplayString(SIZE(0..255))
				MAX-ACCESS	read-only
				STATUS		current
				DESCRIPTION
							"The description of a event."
				::= {host2DevEvtEntry 2}
				
			host2DevEvtType OBJECT-TYPE
				SYNTAX		INTEGER {notice(0), warning(1), alarm(2)}
				MAX-ACCESS	read-only
				STATUS		current
				DESCRIPTION
							"The type of a event."
				::= {host2DevEvtEntry 3}

			host2DevEvtState OBJECT-TYPE
				SYNTAX		INTEGER (0..1)
				MAX-ACCESS	read-only
				STATUS		current
				DESCRIPTION
							"The state of a event."
				::= {host2DevEvtEntry 4}

-- ************ End Event Table ************************************

--	************ Parameter Table ***********************************

host2DevParTable	OBJECT-TYPE
	SYNTAX		SEQUENCE OF Host2DevParEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
				"A list of parameters of devices entries.
				If device is disconnected, there is no entry for this device in the table."
	::= {host2 9}

	host2DevParEntry OBJECT-TYPE
		SYNTAX		Host2DevParEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
					"An entry of parameters of devices."
		INDEX		{host2DevIndex, host2DevParIndex}
		::= {host2DevParTable 1}

		Host2DevParEntry ::= SEQUENCE {
			host2DevParIndex		INTEGER,
			host2DevParName			DisplayString,
			host2DevParValue		DisplayString,
			host2DevParUnit			DisplayString,
			host2DevParStateType	INTEGER,
			host2DevParState		INTEGER
			}

 		host2DevParIndex OBJECT-TYPE
 			SYNTAX		INTEGER(1..255)
 			MAX-ACCESS	read-only
 			STATUS		current
 			DESCRIPTION
 						"Unique ID for each parameter."
 			::= {host2DevParEntry 1}

 		host2DevParName OBJECT-TYPE
 			SYNTAX		DisplayString(SIZE(0..255))
 			MAX-ACCESS	read-only
 			STATUS		current
 			DESCRIPTION
 						"The name of a parameter."
			::= {host2DevParEntry 2}

 		host2DevParValue OBJECT-TYPE
 			SYNTAX		DisplayString(SIZE(0..7))
 			MAX-ACCESS	read-only
 			STATUS		current
 			DESCRIPTION
 						"The value of a parameter."
 			::= {host2DevParEntry 3}

 		host2DevParUnit OBJECT-TYPE
 			SYNTAX		DisplayString(SIZE(0..3))
 			MAX-ACCESS	read-only
 			STATUS		current
 			DESCRIPTION
 						"The measurement unit of a parameter."
 			::= {host2DevParEntry 4}

 		host2DevParStateType OBJECT-TYPE
 			SYNTAX		INTEGER {notice(0), warning(1), alarm(2)}
 			MAX-ACCESS	read-only
 			STATUS		current
 			DESCRIPTION
 						"The type of state of a parameter."
 			::= {host2DevParEntry 5}

 		host2DevParState OBJECT-TYPE
 			SYNTAX		INTEGER {noAlarm(0), lessThanMin(1), greatherThanMax(2), blocked(3)}
 			MAX-ACCESS	read-only
 			STATUS		current
 			DESCRIPTION
 						"The state of a parameter."
 			::= {host2DevParEntry 6}

--	************ End Parameter Table *******************************

--	************ Quantity Table *************************************

host2DevQntTable	OBJECT-TYPE
 	SYNTAX		SEQUENCE OF Host2DevQntEntry
 	MAX-ACCESS	not-accessible
 	STATUS		current
 	DESCRIPTION
 				"A list of quantities of devices entries.
				If device is disconnected, there is no entry for this device in the table."
 	::= {host2 10}
 	
 	 host2DevQntEntry OBJECT-TYPE
 		SYNTAX		Host2DevQntEntry
 		MAX-ACCESS	not-accessible
 		STATUS		current
 		DESCRIPTION
 					"An entry of quantities of device."
 		INDEX		{host2DevIndex, host2DevQntIndex}
 		::= {host2DevQntTable 1}
 		
 		Host2DevQntEntry ::= SEQUENCE {
			host2DevQntIndex	INTEGER,
 			host2DevQntName		DisplayString,
 			host2DevQntValue	DisplayString,
			host2DevQntMin		DisplayString,
			host2DevQntMax		DisplayString,
			host2DevQntAccess	INTEGER
 			}
 
  		host2DevQntIndex OBJECT-TYPE
 			SYNTAX		INTEGER(1..255)
 			MAX-ACCESS	read-only
 			STATUS		current
 			DESCRIPTION
 						"An id for each quantity."
 			::= {host2DevQntEntry 1}	
 
  		host2DevQntName OBJECT-TYPE
 			SYNTAX		DisplayString(SIZE(0..255))
 			MAX-ACCESS	read-only
 			STATUS		current
 			DESCRIPTION
 						"The name of a quantity."
 			::= {host2DevQntEntry 2}	
 
		host2DevQntValue OBJECT-TYPE
 			SYNTAX		DisplayString(SIZE(0..12))
 			MAX-ACCESS	read-write
 			STATUS		current
 			DESCRIPTION
 						"The value of a quantity."
 			::= {host2DevQntEntry 3}

		host2DevQntMin OBJECT-TYPE
 			SYNTAX		DisplayString(SIZE(0..12))
 			MAX-ACCESS	read-only
 			STATUS		current
 			DESCRIPTION
 						"The minimum value of a quantity."
 			::= {host2DevQntEntry 4}

		host2DevQntMax OBJECT-TYPE
 			SYNTAX		DisplayString(SIZE(0..12))
 			MAX-ACCESS	read-only
 			STATUS		current
 			DESCRIPTION
 						"The maximum value of a quantity."
 			::= {host2DevQntEntry 5}
 					
		host2DevQntAccess OBJECT-TYPE
 			SYNTAX		INTEGER {read-only(0), read-write(1)}
 			MAX-ACCESS	read-only
 			STATUS		current
 			DESCRIPTION
 						"The access to change the value of a quantity."
 			::= {host2DevQntEntry 6}
			
--	************ End Quantity Table *************************************

--	************ Command Table *************************************

host2DevCmdTable	OBJECT-TYPE
 	SYNTAX		SEQUENCE OF Host2DevCmdEntry
 	MAX-ACCESS	not-accessible
 	STATUS		current
 	DESCRIPTION
 				"A list of commands of devices entries.
				If device is disconnected, there is no entry for this device in the table."
 	::= {host2 11}

 	host2DevCmdEntry OBJECT-TYPE
 		SYNTAX		Host2DevCmdEntry
 		MAX-ACCESS	not-accessible
 		STATUS		current
 		DESCRIPTION
 					"An entry of commands of device."
 		INDEX		{host2DevIndex, host2DevCmdIndex}
 		::= {host2DevCmdTable 1}

		Host2DevCmdEntry ::= SEQUENCE {
			host2DevCmdIndex	INTEGER,
 			host2DevCmdName		DisplayString,
 			host2DevCmdExecute	INTEGER
 			}
 					
 		host2DevCmdIndex OBJECT-TYPE
 			SYNTAX		INTEGER(1..255)
 			MAX-ACCESS	read-only
 			STATUS		current
 			DESCRIPTION
 						"An id for each command."
 			::= {host2DevCmdEntry 1}

 		host2DevCmdName OBJECT-TYPE
 			SYNTAX		DisplayString(SIZE(0..255))
 			MAX-ACCESS	read-only
 			STATUS		current
 			DESCRIPTION
 						"The name of a command."
 			::= {host2DevCmdEntry 2}

 		host2DevCmdExecute OBJECT-TYPE
 			SYNTAX		INTEGER {no(0), yes(1)}
 			MAX-ACCESS	read-write
 			STATUS		current
 			DESCRIPTION
 						"Instructions to execute the command of device.
						If value no(0) is sent, the command will not be executed.
						If value yes(1) is sent, the command will be executed."
 			::= {host2DevCmdEntry 3}

--	************ End Command Table *********************************

--	************ End Devices **********************************

--	************ Traps ****************************************

host2DevConnectionTrap TRAP-TYPE
	ENTERPRISE  host2
	VARIABLES   {host2DevLanState }
	DESCRIPTION
						"This trap is sent when the status of network connection of device is changed.
						There can be two types of network connection status: connected or disconnected."
 	::= 5001
 	
host2DevEvtStateTrap TRAP-TYPE
	ENTERPRISE  host2
	VARIABLES   {host2DevEvtState}
	DESCRIPTION
						"This trap is sent when the state of device is changed: for example,
						 device can enter stand-by mode or there is an alarm, not associated with parameters measured."
 	::= 5002
 	
host2DevParStateTrap TRAP-TYPE
	ENTERPRISE  host2
	VARIABLES   {host2DevParState}
	DESCRIPTION
						"This trap is sent when the state of measured parameters is changed."
 	::= 5003

--	************ End Traps ************************************

END