WAYSTREAM-MIB DEFINITIONS ::= BEGIN -- -- This is the Waystream Management Information Base definition for iBOS, to be -- to be used with Waystream products which use the operating system. -- -- Copyright (c) 2017 Waystream AB, All rights reserved -- IMPORTS MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Unsigned32, Counter64, Gauge32, TimeTicks FROM SNMPv2-SMI DisplayString FROM SNMPv2-TC wsMgmt, wsExperiment FROM WAYSTREAM-SMI; -- -- Waystream IBOS -- ibos MODULE-IDENTITY LAST-UPDATED "201702101100Z" -- February 10, 2017 ORGANIZATION "Waystream AB" CONTACT-INFO "Waystream AB Customer Service Mail : Farogatan 33 SE-164 51 Kista Sweden Tel : +46 8 5626 9450 E-mail: info@waystream.com Web : http://www.waystream.com" DESCRIPTION "The Waystream MIB describing iBOS functionality of ASRs" REVISION "201710231100Z" -- October 23, 2017 DESCRIPTION "Added SFP all unit values, SFP part and serial numbers." REVISION "201709181100Z" -- September 18, 2017 DESCRIPTION "Added SFP RX/TX power dBm values." REVISION "201702101100Z" -- February 10, 2017 DESCRIPTION "Company name change: In October 2015 PacketFront Network Products was renamed Waystream. In this update all PacketFront were changed to Waystream and all pf* to ws*." REVISION "201207051930Z" DESCRIPTION "Added sBasePX (BASE-PX) and sBaseBX10 (BASE-BX10) bits to pfSFPTransceiver (see SFF-8472 standard)." REVISION "201112200908Z" DESCRIPTION "Add 100M and 10G SFP information from SFF-8472 specification. The column pfSFPTransceiver has new bits s100BaseFX and s100BaseLX, a new column pfSFPTransceiverExt which is a combination of the 10G Ethernet Compliance Codes SFP+ Cable Technology information." REVISION "201112060934Z" DESCRIPTION "Added new table pfXFPTable that mirrors the pfSFPTable but with minor differencies in parameter set and interpretation." REVISION "201101111755Z" -- January 11, 2011 DESCRIPTION "Updated company name" REVISION "200904171529Z" DESCRIPTION "Moved pfCopy to PACKETFRONT-COPY-MIB and added environment notifications to the MIB at pfIbosEnvironmentNotifications." REVISION "200903231102Z" DESCRIPTION "Updated telephone information in contact-info. Reordered revision information. Fixed enumerated types not starting from zero" REVISION "200804301426Z" DESCRIPTION "Moved pfRpm to PACKETFRONT-RPM-MIB Moved pfIgmp to PACKETFRONT-IGMP-CACHE-MIB Moved pfProduct to PACKETFRONT-PRODUCTS-MIB Moved boilerplate to PACKETFRONT-SMI and PACKETFRONT-TC" REVISION "200710031835Z" DESCRIPTION "Added pfRpm" REVISION "200706131437Z" DESCRIPTION "Added pfIgmp" REVISION "200610181341Z" DESCRIPTION "Corrected pfAccounting member types" REVISION "200608231100Z" DESCRIPTION "Added pfVersionString OID" REVISION "200601251330Z" DESCRIPTION "Changed name of pfNeighbourPlatform to pfNeighbourModel. Added OID for ASR10K." REVISION "200505101124Z" DESCRIPTION "Added missing connector type SC." REVISION "200502010911Z" DESCRIPTION "Corrected pfPolicyTable entry types. Added description for pfPolicyUseCnt." REVISION "200501141500Z" DESCRIPTION "Added pfAccounting extensions to the MIB." REVISION "200410201434Z" DESCRIPTION "Added the ipdConfig object" REVISION "200405141155Z" DESCRIPTION "Updated to reflect PacketFronts new corporate address" ::= { wsMgmt 1 } -- -- System management objects wsSystem OBJECT-IDENTITY STATUS current DESCRIPTION "System management objects" ::= { ibos 1 } -- Test object wsWritedummy OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is a read-write object that accept an integer. The value written has no effect on the system, but a successful write indicate that SNMP write operations are possible on the target router. The last written value can be read back" ::= { wsSystem 1 } -- Restart the system wsReload OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to restart the target router by setting the number of seconds until system reload. A value of 0 cancels any pending reload. The value returned when reading the object is the number of seconds remaining until reload" ::= { wsSystem 2 } -- System iBOS version wsVersion OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The iBOS version indicator" ::= { wsSystem 3 } -- System iBOS version wsAsrRevision OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The ASR hardware revision" ::= { wsSystem 4 } -- System iBOS version string wsVersionString OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A textual representation of the iBOS version. For iBOS versions after 3.2, this field should be used to identify the iBOS version instead of the old wsVersion OID" ::= { wsSystem 5 } -- -- Environment data wsEnvironment OBJECT-IDENTITY STATUS current DESCRIPTION "Environtment data" ::= { ibos 2 } -- Temperature table wsTempTable OBJECT-TYPE SYNTAX SEQUENCE OF WsTempEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of values from temperature sensors." ::= { wsEnvironment 1 } wsTempEntry OBJECT-TYPE SYNTAX WsTempEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for a temperature sensor." INDEX { wsTempSensor } ::= { wsTempTable 1 } WsTempEntry ::= SEQUENCE { wsTempSensor Unsigned32, wsTempMeasured Integer32, wsTempTOS Integer32, wsTempTHYST Integer32, wsTempThresholdLow Integer32, wsTempThresholdHigh Integer32, wsTempStatus INTEGER } wsTempSensor OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sensor number." ::= { wsTempEntry 1 } wsTempMeasured OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Measured temperature in 100ths of degrees centigrade." ::= { wsTempEntry 2 } wsTempTOS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "TOS in 100ths of degrees centigrade." ::= { wsTempEntry 3 } wsTempTHYST OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "THYST in 100ths of degrees centigrade." ::= { wsTempEntry 4 } wsTempThresholdLow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Threshold (low) in 100ths of degrees centigrade." ::= { wsTempEntry 5 } wsTempThresholdHigh OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Threshold (high) in 100ths of degrees centigrade." ::= { wsTempEntry 6 } wsTempStatus OBJECT-TYPE SYNTAX INTEGER { failed(-1), ok(0), high(1), low(2), disabled(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status (measurement compared to threshold)." ::= { wsTempEntry 7 } -- Voltage table wsVoltTable OBJECT-TYPE SYNTAX SEQUENCE OF WsVoltEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of measured board voltages." ::= { wsEnvironment 2 } wsVoltEntry OBJECT-TYPE SYNTAX WsVoltEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for a board voltage." INDEX { wsVoltChannel } ::= { wsVoltTable 1 } WsVoltEntry ::= SEQUENCE { wsVoltChannel Unsigned32, wsVoltNominal Integer32, wsVoltMeasured Integer32, wsVoltThresholdLow Integer32, wsVoltThresholdHigh Integer32, wsVoltStatus INTEGER } wsVoltChannel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Voltage channel number." ::= { wsVoltEntry 1 } wsVoltNominal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Nominal voltage in mV for channel." ::= { wsVoltEntry 2 } wsVoltMeasured OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Measured voltage in mV for channel." ::= { wsVoltEntry 3 } wsVoltThresholdLow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Threshold (low) voltage in mV for channel." ::= { wsVoltEntry 4 } wsVoltThresholdHigh OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Threshold (high) voltage in mV for channel." ::= { wsVoltEntry 5 } wsVoltStatus OBJECT-TYPE SYNTAX INTEGER { na(-3), failed(-1), ok(0), high(1), low(2), notPresent(3), disabled(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status (measurement compared to threshold)." ::= { wsVoltEntry 6 } -- Fan speed table wsFanTable OBJECT-TYPE SYNTAX SEQUENCE OF WsFanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of measured rotation speeds for external fans." ::= { wsEnvironment 3 } wsFanEntry OBJECT-TYPE SYNTAX WsFanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for a fan." INDEX { wsFanNumber } ::= { wsFanTable 1 } WsFanEntry ::= SEQUENCE { wsFanNumber Unsigned32, wsFanRPM Integer32 } wsFanNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Fan number." ::= { wsFanEntry 1 } wsFanRPM OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Fan speed in revolutions per minute." ::= { wsFanEntry 2 } -- Fan driving voltage wsFanVoltage OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Fan driving voltage (in mV)." ::= { wsEnvironment 4 } -- Provides control over if send ibos environment related traps wsIbosEnvironmentTrapEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Provides control over iBOS environment related traps." ::= { wsEnvironment 5 } -- -- PFDP data wsPFDP OBJECT-IDENTITY STATUS current DESCRIPTION "PFDP data" ::= { ibos 3 } -- PFDP Neighbours Table wsNeighboursTable OBJECT-TYPE SYNTAX SEQUENCE OF WsNeighboursEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of discovered PFDB Neighbours." ::= { wsPFDP 1 } wsNeighboursEntry OBJECT-TYPE SYNTAX WsNeighboursEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for a neighbour." INDEX { wsNeighbourIfIndex, wsNeighbourNIndex } ::= { wsNeighboursTable 1 } WsNeighboursEntry ::= SEQUENCE { wsNeighbourIfIndex Unsigned32, wsNeighbourNIndex Unsigned32, wsNeighbourHostname DisplayString, wsNeighbourLocalIf DisplayString, wsNeighbourRemoteIf DisplayString, wsNeighbourModel DisplayString, wsNeighbourLastAct Integer32, wsNeighbourOSVersion DisplayString, wsNeighbourSNPA OCTET STRING, wsNeighbourUptime Unsigned32, wsNeighbourState INTEGER, wsNeighbourDBCount Unsigned32, wsNeighbourCreated TimeTicks, wsNeighbourPacketsIn Unsigned32, wsNeighbourPacketErrorsrIn Unsigned32 } wsNeighbourIfIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Neighbour interface index." ::= { wsNeighboursEntry 1 } wsNeighbourNIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Neighbour index." ::= { wsNeighboursEntry 2 } wsNeighbourHostname OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Neighbour hostname." ::= { wsNeighboursEntry 3 } wsNeighbourLocalIf OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Local interface that neighbour is on." ::= { wsNeighboursEntry 4 } wsNeighbourRemoteIf OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Remote interface of neighbour." ::= { wsNeighboursEntry 5 } wsNeighbourModel OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Neighbour model." ::= { wsNeighboursEntry 6 } wsNeighbourLastAct OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Time in seconds since last neighbour advertisment." ::= { wsNeighboursEntry 7 } wsNeighbourOSVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Neighbour OS version." ::= { wsNeighboursEntry 8 } wsNeighbourSNPA OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "SNPA of neighbour interface." ::= { wsNeighboursEntry 9 } wsNeighbourUptime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Uptime in seconds for neighbour." ::= { wsNeighboursEntry 10 } wsNeighbourState OBJECT-TYPE SYNTAX INTEGER { bidirectional(1), unidirectional(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of neighbour." ::= { wsNeighboursEntry 11 } wsNeighbourDBCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Database entries for neighbour." ::= { wsNeighboursEntry 12 } wsNeighbourCreated OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time the neighbour first appeared on the interface." ::= { wsNeighboursEntry 13 } wsNeighbourPacketsIn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of PFDP packets received from neighbour." ::= { wsNeighboursEntry 14 } wsNeighbourPacketErrorsrIn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of erroneous PFDP packets received from neighbour." ::= { wsNeighboursEntry 15 } -- PFDP Neighbour Ports Table wsNeighbourPortsTable OBJECT-TYPE SYNTAX SEQUENCE OF WsNeighbourPortsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of ports of discovered PFDB Neighbours." ::= { wsPFDP 2 } wsNeighbourPortsEntry OBJECT-TYPE SYNTAX WsNeighbourPortsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for a port of a neighbour." INDEX { wsNeighbourPortIfIndex, wsNeighbourPortNIndex, wsNeighbourPortPIndex } ::= { wsNeighbourPortsTable 1 } WsNeighbourPortsEntry ::= SEQUENCE { wsNeighbourPortIfIndex Unsigned32, wsNeighbourPortNIndex Unsigned32, wsNeighbourPortPIndex Unsigned32, wsNeighbourPortName DisplayString, wsNeighbourPortState BITS, wsNeighbourPortTxOctets Counter64, wsNeighbourPortTxDropPkts Unsigned32, wsNeighbourPortTxBroadcastPkts Unsigned32, wsNeighbourPortTxMulticastPkts Unsigned32, wsNeighbourPortTxUnicastPkts Unsigned32, wsNeighbourPortTxCollisions Unsigned32, wsNeighbourPortTxDeferredTransmit Unsigned32, wsNeighbourPortTxFrameInDisc Unsigned32, wsNeighbourPortRxOctets Counter64, wsNeighbourPortRxUndersizePkts Unsigned32, wsNeighbourPortPkts64Octets Unsigned32, wsNeighbourPortPkts65to127Octets Unsigned32, wsNeighbourPortPkts128to255Octets Unsigned32, wsNeighbourPortPkts256to511Octets Unsigned32, wsNeighbourPortPkts512to1023Octets Unsigned32, wsNeighbourPortPkts1024to1522Octets Unsigned32, wsNeighbourPortRxOversizePkts Unsigned32, wsNeighbourPortRxJabbers Unsigned32, wsNeighbourPortRxAlignmentErrors Unsigned32, wsNeighbourPortRxFCSErrors Unsigned32, wsNeighbourPortRxGoodOctets Counter64, wsNeighbourPortRxDropPkts Unsigned32, wsNeighbourPortRxUnicastPkts Unsigned32, wsNeighbourPortRxMulticastPkts Unsigned32, wsNeighbourPortRxBroadcastPkts Unsigned32, wsNeighbourPortRxFragments Unsigned32, wsNeighbourPortRxExcessSizeDisc Unsigned32, wsNeighbourPortRxSymbolError Unsigned32 } wsNeighbourPortIfIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Neighbour interface index." ::= { wsNeighbourPortsEntry 1 } wsNeighbourPortNIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Neighbour index." ::= { wsNeighbourPortsEntry 2 } wsNeighbourPortPIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Neighbour port index." ::= { wsNeighbourPortsEntry 3 } wsNeighbourPortName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of neighbour port." ::= { wsNeighbourPortsEntry 4 } wsNeighbourPortState OBJECT-TYPE SYNTAX BITS { reserved0(0), reserved1(1), reserved2(2), reserved3(3), vlaninfo(4), s100mbit(5), fullduplex(6), up(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of neighbour port." ::= { wsNeighbourPortsEntry 5 } wsNeighbourPortTxOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of good bytes of data transmitted by a port (excluding preamble but including FCS)." ::= { wsNeighbourPortsEntry 6 } wsNeighbourPortTxDropPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter is incremented every time a transmit packet is dropped due to lack of resources (e.g., transmit FIFO underflow), or an internal MAC sublayer transmit error not counted by.in either the TxLateCollision or the TxExcessiveCollision counters." ::= { wsNeighbourPortsEntry 7 } wsNeighbourPortTxBroadcastPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of good packets transmitted by a port that are directed to a broadcast address. This counter does not include errored broadcast packets or valid multicast packets." ::= { wsNeighbourPortsEntry 8 } wsNeighbourPortTxMulticastPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of good packets transmitted by a port that are directed to a multicast address. This counter does not include errored multicast packets or valid broadcast packets." ::= { wsNeighbourPortsEntry 9 } wsNeighbourPortTxUnicastPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of good packets transmitted by a port that are addressed to a unicast address." ::= { wsNeighbourPortsEntry 10 } wsNeighbourPortTxCollisions OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of collisions experienced by a port during packet transmissions." ::= { wsNeighbourPortsEntry 11 } wsNeighbourPortTxDeferredTransmit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets transmitted by a port for which the first transmission attempt is delayed because the medium is busy." ::= { wsNeighbourPortsEntry 12 } wsNeighbourPortTxFrameInDisc OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid packets received which are discarded by the forwarding process due to lack of space on an output queue." ::= { wsNeighbourPortsEntry 13 } wsNeighbourPortRxOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes of data received by a port (excluding preamble but including FCS), including bad packets." ::= { wsNeighbourPortsEntry 14 } wsNeighbourPortRxUndersizePkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of good packets received by a port that are less than 64 bytes long (excluding framing bits but including the FCS)." ::= { wsNeighbourPortsEntry 15 } wsNeighbourPortPkts64Octets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets (including error packets) that are 64 bytes long." ::= { wsNeighbourPortsEntry 16 } wsNeighbourPortPkts65to127Octets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets (including error packets) that are between 65 and 127 bytes long." ::= { wsNeighbourPortsEntry 17 } wsNeighbourPortPkts128to255Octets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets (including error packets) that are between 128 and 255 bytes long." ::= { wsNeighbourPortsEntry 18 } wsNeighbourPortPkts256to511Octets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets (including error packets) that are between 256 and 511 bytes long." ::= { wsNeighbourPortsEntry 19 } wsNeighbourPortPkts512to1023Octets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets (including error packets) that are between 512 and 1023 bytes long." ::= { wsNeighbourPortsEntry 20 } wsNeighbourPortPkts1024to1522Octets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets (including error packets) that are between 1024 and 1522 bytes long." ::= { wsNeighbourPortsEntry 21 } wsNeighbourPortRxOversizePkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of good packets received by a port that are greater than 1522 bytes inclusive (excluding framing bits but including the FCS). Note that this counter alone will be incremented for packets in the range 1523-1536 bytes inclusive, whereas both this counter and the RxExcessSizeDisc counter will be incremented for packets of 1537 bytes and higher." ::= { wsNeighbourPortsEntry 22 } wsNeighbourPortRxJabbers OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets received by a port that are longer than 1522 bytes and have either an FCS error or an alignment error." ::= { wsNeighbourPortsEntry 23 } wsNeighbourPortRxAlignmentErrors OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets received by a port that have a length (excluding framing bits but including FCS) between 64 and 1522 bytes, inclusive, and have a bad FCS with a nonintegral number of bytes." ::= { wsNeighbourPortsEntry 24 } wsNeighbourPortRxFCSErrors OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets received by a port that have a length (excluding framing bits but including FCS) between 64 and 1522 bytes inclusive, and have a bad FCS with an integral number of bytes." ::= { wsNeighbourPortsEntry 25 } wsNeighbourPortRxGoodOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes in all good packets received by a port (excluding framing bits but including FCS)." ::= { wsNeighbourPortsEntry 26 } wsNeighbourPortRxDropPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of good packets received by a port that were dropped due to lack of resources (e.g., lack of input buffers) or were dropped due to lack of resources before a determination of the validity of the packet was able to be made (e.g., receive FIFO overflow). The counter is only incremented if the receive error was not counted by.either the RxExcessSizeDisc, the RxAlignmentErrors or the RxFCSErrors counters." ::= { wsNeighbourPortsEntry 27 } wsNeighbourPortRxUnicastPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of good packets received by a port that are addressed to a unicast address." ::= { wsNeighbourPortsEntry 28 } wsNeighbourPortRxMulticastPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of good packets received by a port that are directed to a multicast address. This counter does not include errored multicast packets or valid broadcast packets." ::= { wsNeighbourPortsEntry 29 } wsNeighbourPortRxBroadcastPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of good packets received by a port that are directed to the broadcast address. This counter does not include errored broadcast packets or valid multicast packets." ::= { wsNeighbourPortsEntry 30 } wsNeighbourPortRxFragments OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets received by a port that are less than 64 bytes (excluding framing bits) and have either an FCS error or an alignment error." ::= { wsNeighbourPortsEntry 31 } wsNeighbourPortRxExcessSizeDisc OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of good packets received by a port that are greater than 1536 bytes (excluding framing bits but including the FCS) and were discarded due to excessive length. Note that the RxOversizePkts counter alone is incremented for packets in the range 1523-1536 bytes inclusive, whereas both this counter and the RxOversizePkts counter are incremented for packets of 1537 bytes and higher." ::= { wsNeighbourPortsEntry 32 } wsNeighbourPortRxSymbolError OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of times a valid length packet was received at a port and at least one invalid data symbol was detected. Counter only increment once per carrier event and does not increment on detection of collision during the carrier event." ::= { wsNeighbourPortsEntry 33 } -- PFDP Neighbour Ports SNPA Table wsNeighbourPortSNPATable OBJECT-TYPE SYNTAX SEQUENCE OF WsNeighbourPortSNPAEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of known SNPA on ports of discovered PFDB Neighbours." ::= { wsPFDP 3 } wsNeighbourPortSNPAEntry OBJECT-TYPE SYNTAX WsNeighbourPortSNPAEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for a known SNPA on a port of a neighbour." INDEX { wsNeighbourPortSNPAIfIndex, wsNeighbourPortSNPANIndex, wsNeighbourPortSNPAPIndex, wsNeighbourPortSNPASIndex } ::= { wsNeighbourPortSNPATable 1 } WsNeighbourPortSNPAEntry ::= SEQUENCE { wsNeighbourPortSNPAIfIndex Unsigned32, wsNeighbourPortSNPANIndex Unsigned32, wsNeighbourPortSNPAPIndex Unsigned32, wsNeighbourPortSNPASIndex Unsigned32, wsNeighbourPortSNPASMCast Integer32, wsNeighbourPortSNPA OCTET STRING } wsNeighbourPortSNPAIfIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Neighbour interface index." ::= { wsNeighbourPortSNPAEntry 1 } wsNeighbourPortSNPANIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Neighbour index." ::= { wsNeighbourPortSNPAEntry 2 } wsNeighbourPortSNPAPIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Neighbour port index." ::= { wsNeighbourPortSNPAEntry 3 } wsNeighbourPortSNPASIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Neighbour port SNPA index." ::= { wsNeighbourPortSNPAEntry 4 } wsNeighbourPortSNPASMCast OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Set to 1 if SNPA is a multicast address, 0 otherwise." ::= { wsNeighbourPortSNPAEntry 5 } wsNeighbourPortSNPA OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Known SNPA on neighbour port." ::= { wsNeighbourPortSNPAEntry 6 } -- -- SFP Table wsSFPTable OBJECT-TYPE SYNTAX SEQUENCE OF WsSFPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with information on SFPs." ::= { ibos 4 } wsSFPEntry OBJECT-TYPE SYNTAX WsSFPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for an SFP." INDEX { wsSFPIndex } ::= { wsSFPTable 1 } WsSFPEntry ::= SEQUENCE { wsSFPIndex Unsigned32, wsSFPStatus INTEGER, wsSFPConnector INTEGER, wsSFPTransceiver BITS, wsSFPEncoding INTEGER, wsSFPBitrate Unsigned32, wsSFPSingleModeLen Unsigned32, wsSFPMultiMode50Len Unsigned32, wsSFPMultiMode625Len Unsigned32, wsSFPCopperLen Unsigned32, wsSFPTempStatus INTEGER, wsSFPTemp Integer32, wsSFPVoltStatus INTEGER, wsSFPVolt Integer32, wsSFPTXCurrentStatus INTEGER, wsSFPTXCurrent Integer32, wsSFPTXPowerStatus INTEGER, wsSFPTXPower Integer32, wsSFPRXPowerStatus INTEGER, wsSFPRXPower Integer32, wsSFPTransceiverExt BITS, wsSFPTXdBmPower Integer32, wsSFPRXdBmPower Integer32, wsSFPTempNormalLow Integer32, wsSFPTempNormalHigh Integer32, wsSFPTempWarningLow Integer32, wsSFPTempWarningHigh Integer32, wsSFPVoltNormalLow Integer32, wsSFPVoltNormalHigh Integer32, wsSFPVoltWarningLow Integer32, wsSFPVoltWarningHigh Integer32, wsSFPTXCurrentNormalLow Integer32, wsSFPTXCurrentNormalHigh Integer32, wsSFPTXCurrentWarningLow Integer32, wsSFPTXCurrentWarningHigh Integer32, wsSFPTXOutputPowNormalLowuW Integer32, wsSFPTXOutputPowNormalHighuW Integer32, wsSFPTXOutputPowWarningLowuW Integer32, wsSFPTXOutputPowWarningHighuW Integer32, wsSFPTXOutputPowNormalLowdBm Integer32, wsSFPTXOutputPowNormalHighdBm Integer32, wsSFPTXOutputPowWarningLowdBm Integer32, wsSFPTXOutputPowWarningHighdBm Integer32, wsSFPRXInputPowNormalLowuW Integer32, wsSFPRXInputPowNormalHighuW Integer32, wsSFPRXInputPowWarningLowuW Integer32, wsSFPRXInputPowWarningHighuW Integer32, wsSFPRXInputPowNormalLowdBm Integer32, wsSFPRXInputPowNormalHighdBm Integer32, wsSFPRXInputPowWarningLowdBm Integer32, wsSFPRXInputPowWarningHighdBm Integer32, wsSFPPartNumber DisplayString, wsSFPSerialNumber DisplayString } wsSFPIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "SFP number." ::= { wsSFPEntry 1 } wsSFPStatus OBJECT-TYPE SYNTAX INTEGER { ok(0), missing(1), invalid(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "SFP status." ::= { wsSFPEntry 2 } wsSFPConnector OBJECT-TYPE SYNTAX INTEGER { sc(1), fiberJack(6), lc(7), mtrj(8), mu(9), sg(10), opticalPigtail(11), hssdcii(32), copperPigtail(33) } MAX-ACCESS read-only STATUS current DESCRIPTION "Connector type." ::= { wsSFPEntry 3 } wsSFPTransceiver OBJECT-TYPE SYNTAX BITS { sBasePX(0), sBaseBX10(1), s100BaseFX(2), s100BaseLX(3), s1000BaseT(4), s1000BaseCX(5), s1000BaseLX(6), s1000BaseSX(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Transceiver capablities." ::= { wsSFPEntry 4 } wsSFPEncoding OBJECT-TYPE SYNTAX INTEGER { e8B10B(1), e4B5B(2), eNRZ(3), eManchester(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Encoding type." ::= { wsSFPEntry 5 } wsSFPBitrate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "SFP Bitrate (Mbps)." ::= { wsSFPEntry 6 } wsSFPSingleModeLen OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Supported single mode fiber link length (m). A value of 255000 means > 254000 m." ::= { wsSFPEntry 7 } wsSFPMultiMode50Len OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Supported 50um multi-mode fiber link length (m). A value of 2550 means > 2540 m." ::= { wsSFPEntry 8 } wsSFPMultiMode625Len OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Supported 62.5um multi-mode fiber link length (m). A value of 2550 means > 2540 m." ::= { wsSFPEntry 9 } wsSFPCopperLen OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Supported copper link length (m). A value of 255 means > 254 m." ::= { wsSFPEntry 10 } wsSFPTempStatus OBJECT-TYPE SYNTAX INTEGER { unknown(0), alarmLow(1), warnLow(2), ok(3), warnHigh(4), alarmHigh(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Temperature status." ::= { wsSFPEntry 11 } wsSFPTemp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Measured temperature in degrees centigrade." ::= { wsSFPEntry 12 } wsSFPVoltStatus OBJECT-TYPE SYNTAX INTEGER { unknown(0), alarmLow(1), warnLow(2), ok(3), warnHigh(4), alarmHigh(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Voltage status." ::= { wsSFPEntry 13 } wsSFPVolt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Measured voltage (mV)." ::= { wsSFPEntry 14 } wsSFPTXCurrentStatus OBJECT-TYPE SYNTAX INTEGER { unknown(0), alarmLow(1), warnLow(2), ok(3), warnHigh(4), alarmHigh(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "TX Current status." ::= { wsSFPEntry 15 } wsSFPTXCurrent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Measured TX current (mA)." ::= { wsSFPEntry 16 } wsSFPTXPowerStatus OBJECT-TYPE SYNTAX INTEGER { unknown(0), alarmLow(1), warnLow(2), ok(3), warnHigh(4), alarmHigh(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "TX power status." ::= { wsSFPEntry 17 } wsSFPTXPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Measured TX power (uW)." ::= { wsSFPEntry 18 } wsSFPRXPowerStatus OBJECT-TYPE SYNTAX INTEGER { unknown(0), alarmLow(1), warnLow(2), ok(3), warnHigh(4), alarmHigh(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "RX power status." ::= { wsSFPEntry 19 } wsSFPRXPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Measured RX power (uW)." ::= { wsSFPEntry 20 } wsSFPTransceiverExt OBJECT-TYPE SYNTAX BITS { s10000BaseER(0), s10000BaseLRM(1), s10000BaseLR(2), s10000BaseSR(3), sActiveCable(4), sPassiveCable(5), reserved6(6), reserved7(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "10G Ethernet Compliance Codes." ::= { wsSFPEntry 21 } wsSFPTXdBmPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Measured TX power (dBm x 1000)." ::= { wsSFPEntry 22 } wsSFPRXdBmPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Measured RX power (dBm x 1000)." ::= { wsSFPEntry 23 } wsSFPTempNormalLow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Operating temparature normal range low (C)." ::= { wsSFPEntry 24 } wsSFPTempNormalHigh OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Operating temparature normal range high (C)." ::= { wsSFPEntry 25 } wsSFPTempWarningLow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Operating temparature warning range low (C)." ::= { wsSFPEntry 26 } wsSFPTempWarningHigh OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Operating temparature warning range high (C)." ::= { wsSFPEntry 27 } wsSFPVoltNormalLow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Supply voltage normal range low (mV)." ::= { wsSFPEntry 28 } wsSFPVoltNormalHigh OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Supply voltage normal range high (mV)." ::= { wsSFPEntry 29 } wsSFPVoltWarningLow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Supply voltage warning range low (mV)." ::= { wsSFPEntry 30 } wsSFPVoltWarningHigh OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Supply voltage warning range high (mV)." ::= { wsSFPEntry 31 } wsSFPTXCurrentNormalLow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "TX Current normal range low (mA)." ::= { wsSFPEntry 32 } wsSFPTXCurrentNormalHigh OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "TX Current normal range high (mA)." ::= { wsSFPEntry 33 } wsSFPTXCurrentWarningLow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "TX Current warning range low (mA)." ::= { wsSFPEntry 34 } wsSFPTXCurrentWarningHigh OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "TX Current warning range high (mA)." ::= { wsSFPEntry 35 } wsSFPTXOutputPowNormalLowuW OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "TX output power normal range low (uW)." ::= { wsSFPEntry 36 } wsSFPTXOutputPowNormalHighuW OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "TX output power normal range high (uW)." ::= { wsSFPEntry 37 } wsSFPTXOutputPowWarningLowuW OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "TX output power warning range low (uW)." ::= { wsSFPEntry 38 } wsSFPTXOutputPowWarningHighuW OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "TX output power warning range high (uW)." ::= { wsSFPEntry 39 } wsSFPTXOutputPowNormalLowdBm OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "TX output power normal range low (dBm x 1000)." ::= { wsSFPEntry 40 } wsSFPTXOutputPowNormalHighdBm OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "TX output power normal range high (dBm x 1000)." ::= { wsSFPEntry 41 } wsSFPTXOutputPowWarningLowdBm OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "TX output power warning range low (dBm x 1000)." ::= { wsSFPEntry 42 } wsSFPTXOutputPowWarningHighdBm OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "TX output power warning range high (dBm x 1000)." ::= { wsSFPEntry 43 } wsSFPRXInputPowNormalLowuW OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "RX input power normal range low (uW)." ::= { wsSFPEntry 44 } wsSFPRXInputPowNormalHighuW OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "RX input power normal range high (uW)." ::= { wsSFPEntry 45 } wsSFPRXInputPowWarningLowuW OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "RX input power warning range low (uW)." ::= { wsSFPEntry 46 } wsSFPRXInputPowWarningHighuW OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "RX input power warning range high (uW)." ::= { wsSFPEntry 47 } wsSFPRXInputPowNormalLowdBm OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "RX input power normal range low (dBm x 1000)." ::= { wsSFPEntry 48 } wsSFPRXInputPowNormalHighdBm OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "RX input power normal range high (dBm x 1000)." ::= { wsSFPEntry 49 } wsSFPRXInputPowWarningLowdBm OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "RX input power warning range low (dBm x 1000)." ::= { wsSFPEntry 50 } wsSFPRXInputPowWarningHighdBm OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "RX input power warning range high (dBm x 1000)." ::= { wsSFPEntry 51 } wsSFPPartNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "SFP part number." ::= { wsSFPEntry 52 } wsSFPSerialNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "SFP serial number." ::= { wsSFPEntry 53 } -- -- Accounting objects wsAccounting OBJECT-IDENTITY STATUS current DESCRIPTION "Accounting objects" ::= { ibos 5 } wsPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF WsPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of policy accounting information." ::= { wsAccounting 1 } wsPolicyEntry OBJECT-TYPE SYNTAX WsPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for a policy." INDEX { wsPolicyIfIndex, wsPolicyName } ::= { wsPolicyTable 1 } WsPolicyEntry ::= SEQUENCE { wsPolicyIfIndex Unsigned32, wsPolicyIfName DisplayString, wsPolicyName DisplayString, wsPolicyCookie DisplayString, wsPolicyInPkts Counter64, wsPolicyInBytes Counter64, wsPolicyInDrops Counter64, wsPolicyOutPkts Counter64, wsPolicyOutBytes Counter64, wsPolicyOutDrops Counter64, wsPolicyUsedCnt Gauge32 } wsPolicyIfIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Interface index of policy accounting entry." ::= { wsPolicyEntry 1 } wsPolicyIfName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name of policy accountin entry" ::= { wsPolicyEntry 2 } wsPolicyName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of policy." ::= { wsPolicyEntry 3 } wsPolicyCookie OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of policy cookie." ::= { wsPolicyEntry 4 } wsPolicyInPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Input packets counter." ::= { wsPolicyEntry 5 } wsPolicyInBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Input bytes counter." ::= { wsPolicyEntry 6 } wsPolicyInDrops OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number input packets dropped." ::= { wsPolicyEntry 7 } wsPolicyOutPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Output packets counter." ::= { wsPolicyEntry 8 } wsPolicyOutBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Output bytes counter." ::= { wsPolicyEntry 9 } wsPolicyOutDrops OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number input packets dropped." ::= { wsPolicyEntry 10 } wsPolicyUsedCnt OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number policy maps set to use this policy." ::= { wsPolicyEntry 11 } -- -- XFP Table wsXFPTable OBJECT-TYPE SYNTAX SEQUENCE OF WsXFPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with information on XFPs." ::= { ibos 6 } wsXFPEntry OBJECT-TYPE SYNTAX WsXFPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for an XFP." INDEX { wsXFPIndex } ::= { wsXFPTable 1 } WsXFPEntry ::= SEQUENCE { wsXFPIndex Unsigned32, wsXFPStatus INTEGER, wsXFPConnector INTEGER, wsXFPTransceiver BITS, wsXFPEncoding BITS, wsXFPBitrateMin Unsigned32, wsXFPBitrateMax Unsigned32, wsXFPSingleModeLen Unsigned32, wsXFPMultiMode50Len Unsigned32, wsXFPMultiMode625Len Unsigned32, wsXFPCopperLen Unsigned32, wsXFPTempStatus INTEGER, wsXFPTemp Integer32, wsXFPTXCurrentStatus INTEGER, wsXFPTXCurrent Integer32, wsXFPTXPowerStatus INTEGER, wsXFPTXPower Integer32, wsXFPRXPowerStatus INTEGER, wsXFPRXPower Integer32 } wsXFPIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "XFP number." ::= { wsXFPEntry 1 } wsXFPStatus OBJECT-TYPE SYNTAX INTEGER { ok(0), missing(1), invalid(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "XFP status." ::= { wsXFPEntry 2 } wsXFPConnector OBJECT-TYPE SYNTAX INTEGER { sc(1), fiberJack(6), lc(7), mtrj(8), mu(9), sg(10), opticalPigtail(11), hssdcii(32), copperPigtail(33) } MAX-ACCESS read-only STATUS current DESCRIPTION "Connector type." ::= { wsXFPEntry 3 } wsXFPTransceiver OBJECT-TYPE SYNTAX BITS { reserved0(0), s10GBaseEW(1), s10GBaseLW(2), s10GBaseSW(3), s10GBaseLRM(4), s10GBaseER(5), s10GBaseLR(6), s10GBaseSR(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Transceiver capablities." ::= { wsXFPEntry 4 } wsXFPEncoding OBJECT-TYPE SYNTAX BITS { reserved0(0), reserved1(1), reserved2(2), eRZ(3), eNRZ(4), eSonetScrambl(5), e8B10B(6), e64B66B(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Encoding type." ::= { wsXFPEntry 5 } wsXFPBitrateMin OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "XFP Min Bitrate (Mbps)." ::= { wsXFPEntry 6 } wsXFPBitrateMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "XFP Max Bitrate (Mbps)." ::= { wsXFPEntry 7 } wsXFPSingleModeLen OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Supported single mode fiber link length (m). A value of 255000 means > 254000 m." ::= { wsXFPEntry 8 } wsXFPMultiMode50Len OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Supported 50um multi-mode fiber link length (m). A value of 510 means > 508 m." ::= { wsXFPEntry 9 } wsXFPMultiMode625Len OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Supported 62.5um multi-mode fiber link length (m). A value of 255 means > 254 m." ::= { wsXFPEntry 10 } wsXFPCopperLen OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Supported copper link length (m). A value of 255 means > 254 m." ::= { wsXFPEntry 11 } wsXFPTempStatus OBJECT-TYPE SYNTAX INTEGER { unknown(0), alarmLow(1), warnLow(2), ok(3), warnHigh(4), alarmHigh(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Temperature status." ::= { wsXFPEntry 12 } wsXFPTemp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Measured temperature in degrees centigrade." ::= { wsXFPEntry 13 } wsXFPTXCurrentStatus OBJECT-TYPE SYNTAX INTEGER { unknown(0), alarmLow(1), warnLow(2), ok(3), warnHigh(4), alarmHigh(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "TX Current status." ::= { wsXFPEntry 14 } wsXFPTXCurrent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Measured TX current (mA)." ::= { wsXFPEntry 15 } wsXFPTXPowerStatus OBJECT-TYPE SYNTAX INTEGER { unknown(0), alarmLow(1), warnLow(2), ok(3), warnHigh(4), alarmHigh(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "TX power status." ::= { wsXFPEntry 16 } wsXFPTXPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Measured TX power (uW)." ::= { wsXFPEntry 17 } wsXFPRXPowerStatus OBJECT-TYPE SYNTAX INTEGER { unknown(0), alarmLow(1), warnLow(2), ok(3), warnHigh(4), alarmHigh(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "RX power status." ::= { wsXFPEntry 18 } wsXFPRXPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Measured RX power (uW)." ::= { wsXFPEntry 19 } -- -- Waystream ibos environment related notifications wsIbosEnvironmentNotifications OBJECT IDENTIFIER ::={ wsEnvironment 0 } wsIbosTempLow NOTIFICATION-TYPE OBJECTS { wsTempSensor, wsTempMeasured, wsTempThresholdLow, wsTempStatus } STATUS current DESCRIPTION "A wsIbosTempLow trap signifies that the SNMP entity, acting in an agent role, has detected that one of its temperature sensors is outside of the predefined low threshold." ::= { wsIbosEnvironmentNotifications 1 } wsIbosTempHigh NOTIFICATION-TYPE OBJECTS { wsTempSensor, wsTempMeasured, wsTempThresholdHigh, wsTempStatus } STATUS current DESCRIPTION "A wsIbosTempHigh trap signifies that the SNMP entity, acting in an agent role, has detected that one of its temperature sensors is outside of the predefined high threshold." ::= { wsIbosEnvironmentNotifications 2 } wsIbosVoltLow NOTIFICATION-TYPE OBJECTS { wsVoltChannel, wsVoltMeasured, wsVoltThresholdLow, wsVoltStatus } STATUS current DESCRIPTION "A wsIbosVoltLow trap signifies that the SNMP entity, acting in an agent role, has detected that one of its voltage channels is outside of the predefined low threshold." ::= { wsIbosEnvironmentNotifications 3 } wsIbosVoltHigh NOTIFICATION-TYPE OBJECTS { wsVoltChannel, wsVoltMeasured, wsVoltThresholdHigh, wsVoltStatus } STATUS current DESCRIPTION "A wsIbosVoltHigh trap signifies that the SNMP entity, acting in an agent role, has detected that one of its voltage channels is outside of the predefined high threshold." ::= { wsIbosEnvironmentNotifications 4 } wsIbosFanRPMLow NOTIFICATION-TYPE OBJECTS { wsFanNumber, wsFanRPM } STATUS current DESCRIPTION "A wsIbosFanRPMLow trap signifies that the SNMP entity, acting in an agent role, has detected that one of its fans's RPM is lower than the system defined threshold." ::= { wsIbosEnvironmentNotifications 5 } wsIbosFanOutVoltLow NOTIFICATION-TYPE OBJECTS { wsFanVoltage } STATUS current DESCRIPTION "A wsIbosFanOutVoltLow trap signifies that the SNMP entity, acting in an agent role, has detected that its fan output voltage is lower than the system defined threshold." ::= { wsIbosEnvironmentNotifications 6 } END