ZTE-AN-SOFTWARE-MIB DEFINITIONS ::= BEGIN IMPORTS DisplayString FROM SNMPv2-TC DateAndTime FROM SNMPv2-TC TruthValue FROM SNMPv2-TC MODULE-IDENTITY FROM SNMPv2-SMI OBJECT-TYPE FROM SNMPv2-SMI Integer32 FROM SNMPv2-SMI NOTIFICATION-TYPE FROM SNMPv2-SMI zxAnSystem FROM ZTE-AN-SMI MODULE-COMPLIANCE FROM SNMPv2-CONF OBJECT-GROUP FROM SNMPv2-CONF NOTIFICATION-GROUP FROM SNMPv2-CONF; zxAnSoftwareMib MODULE-IDENTITY LAST-UPDATED "201105260000Z" ORGANIZATION "ZTE Corporation" CONTACT-INFO "Zhou YuBin ZTE Corporation Mail: zhou.yubing@zte.com.cn Tel : +86-21-68897315" DESCRIPTION "This MIB defines zte Access Node software management." REVISION "201105260000Z" DESCRIPTION "Initial version of this MIB module." ::= { zxAnSystem 30 } ------------------------------------------------------------------------------- -- Following management objects are defined. -- 1. Card Running Software Information Table -- 2. Subcard Running Software Information Table -- 3. Saved Software Information Table -- 4. Software Manual Update Management Table -- 5. Software Manual Update Status Table -- 6. Subcard Software Manual Update Status Table -- 7. Software Automatic Update Check Management Table -- 8. Software Automatic Update Management Table -- 9. Software Swap Management Table -- 10. Saved Patch Information Table -- 11. Card Patch Running Status Information Table -- 12. Subcard Running Patch Information Table -- 13. Saved Patch Package Information Table -- 14. Saved Patch Package File Information Table -- Following notification objects are defined. -- 21. Software Notification -- Following conformance information is defined. -- 31. Software Conformance ------------------------------------------------------------------------------- zxAnSwObjects OBJECT IDENTIFIER ::= { zxAnSoftwareMib 2 } zxAnSwNotifications OBJECT IDENTIFIER ::= { zxAnSoftwareMib 3 } zxAnCardSwObjects OBJECT IDENTIFIER ::= { zxAnSwObjects 2 } zxAnSwUpdateObjects OBJECT IDENTIFIER ::= { zxAnSwObjects 3 } zxAnSwSwapObjects OBJECT IDENTIFIER ::= { zxAnSwObjects 4 } zxAnCardPatchObjects OBJECT IDENTIFIER ::= { zxAnSwObjects 5 } zxAnSwManualUpdateObjects OBJECT IDENTIFIER ::= { zxAnSwUpdateObjects 2 } zxAnSwManualUpdateGlobalObjects OBJECT IDENTIFIER ::= { zxAnSwManualUpdateObjects 1 } zxAnSwAutoUpdateObjects OBJECT IDENTIFIER ::= { zxAnSwUpdateObjects 3 } zxAnSwAutoUpdateGlobalObjects OBJECT IDENTIFIER ::= { zxAnSwAutoUpdateObjects 1 } zxAnSwAutoUpdateChkObjects OBJECT IDENTIFIER ::= { zxAnSwAutoUpdateGlobalObjects 1 } zxAnSwAutoUpdateOperObjects OBJECT IDENTIFIER ::= { zxAnSwAutoUpdateGlobalObjects 2 } zxAnSwSwapGlobalObjects OBJECT IDENTIFIER ::= { zxAnSwSwapObjects 1 } zxAnSwAutoUpdateTraps OBJECT IDENTIFIER ::= { zxAnSwNotifications 1 } ------------------------------------------------------------------------------- -- 1.Card Running Software Information Table ------------------------------------------------------------------------------- zxAnSwCardRunningVerTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnSwCardRunningVerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes the card version information." ::= { zxAnCardSwObjects 2 } zxAnSwCardRunningVerEntry OBJECT-TYPE SYNTAX ZxAnSwCardRunningVerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in zxAnCardTable." INDEX { zxAnSwCardRack, zxAnSwCardShelf, zxAnSwCardSlot } ::= { zxAnSwCardRunningVerTable 1 } ZxAnSwCardRunningVerEntry ::= SEQUENCE { zxAnSwCardRack Integer32, zxAnSwCardShelf Integer32, zxAnSwCardSlot Integer32, zxAnSwCardFileName DisplayString, zxAnSwCardFileType DisplayString, zxAnSwCardVersion DisplayString, zxAnSwCardFileLen Integer32, zxAnSwCardBuildTime DateAndTime, zxAnSwCardBootwareFileName DisplayString, zxAnSwCardBootwareFileType DisplayString, zxAnSwCardBootwareVersion DisplayString, zxAnSwCardBootwareFileLen Integer32, zxAnSwCardBootwareBuildTime DateAndTime, zxAnSwCardFirmware1FileName DisplayString, zxAnSwCardFirmware1FileType DisplayString, zxAnSwCardFirmware1Version DisplayString, zxAnSwCardFirmware1FileLen Integer32, zxAnSwCardFirmware1BuildTime DateAndTime, zxAnSwCardFirmware2FileName DisplayString, zxAnSwCardFirmware2FileType DisplayString, zxAnSwCardFirmware2Version DisplayString, zxAnSwCardFirmware2FileLen Integer32, zxAnSwCardFirmware2BuildTime DateAndTime, zxAnSwCardFirmware3FileName DisplayString, zxAnSwCardFirmware3FileType DisplayString, zxAnSwCardFirmware3Version DisplayString, zxAnSwCardFirmware3FileLen Integer32, zxAnSwCardFirmware3BuildTime DateAndTime } zxAnSwCardRack OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The rack number" ::= { zxAnSwCardRunningVerEntry 1 } zxAnSwCardShelf OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The shelf number" ::= { zxAnSwCardRunningVerEntry 2 } zxAnSwCardSlot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The slot number" ::= { zxAnSwCardRunningVerEntry 3 } zxAnSwCardFileName OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The version file name of the card." ::= { zxAnSwCardRunningVerEntry 5 } zxAnSwCardFileType OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The version file type of the card." ::= { zxAnSwCardRunningVerEntry 6 } zxAnSwCardVersion OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The version tag of the card." ::= { zxAnSwCardRunningVerEntry 7 } zxAnSwCardFileLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The version file length of the card." ::= { zxAnSwCardRunningVerEntry 8 } zxAnSwCardBuildTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time of version build. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)." ::= { zxAnSwCardRunningVerEntry 9 } zxAnSwCardBootwareFileName OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The bootrom file name of the card." ::= { zxAnSwCardRunningVerEntry 10 } zxAnSwCardBootwareFileType OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The bootrom file type of the card." ::= { zxAnSwCardRunningVerEntry 11 } zxAnSwCardBootwareVersion OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The bootrom tag of the card." ::= { zxAnSwCardRunningVerEntry 12 } zxAnSwCardBootwareFileLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The bootrom file length of the card." ::= { zxAnSwCardRunningVerEntry 13 } zxAnSwCardBootwareBuildTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time of version build. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)." ::= { zxAnSwCardRunningVerEntry 14 } zxAnSwCardFirmware1FileName OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The firmware file name of the card." ::= { zxAnSwCardRunningVerEntry 15 } zxAnSwCardFirmware1FileType OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The firmware file type of the card." ::= { zxAnSwCardRunningVerEntry 16 } zxAnSwCardFirmware1Version OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The firmware tag of the card." ::= { zxAnSwCardRunningVerEntry 17 } zxAnSwCardFirmware1FileLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The firmware file length of the card." ::= { zxAnSwCardRunningVerEntry 18 } zxAnSwCardFirmware1BuildTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time version build. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)." ::= { zxAnSwCardRunningVerEntry 19 } zxAnSwCardFirmware2FileName OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The firmware file name of the card." ::= { zxAnSwCardRunningVerEntry 20 } zxAnSwCardFirmware2FileType OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The firmware file type of the card." ::= { zxAnSwCardRunningVerEntry 21 } zxAnSwCardFirmware2Version OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The firmware tag of the card." ::= { zxAnSwCardRunningVerEntry 22 } zxAnSwCardFirmware2FileLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The firmware file length of the card." ::= { zxAnSwCardRunningVerEntry 23 } zxAnSwCardFirmware2BuildTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time of version build. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)." ::= { zxAnSwCardRunningVerEntry 24 } zxAnSwCardFirmware3FileName OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The firmware file name of the card." ::= { zxAnSwCardRunningVerEntry 25 } zxAnSwCardFirmware3FileType OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The firmware file type of the card." ::= { zxAnSwCardRunningVerEntry 26 } zxAnSwCardFirmware3Version OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The firmware tag of the card." ::= { zxAnSwCardRunningVerEntry 27 } zxAnSwCardFirmware3FileLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The firmware file length of the card." ::= { zxAnSwCardRunningVerEntry 28 } zxAnSwCardFirmware3BuildTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time of version build. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)." ::= { zxAnSwCardRunningVerEntry 29 } ------------------------------------------------------------------------------- -- 2. Subcard Running Software Information Table ------------------------------------------------------------------------------- zxAnSwSubcardRunningVerTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnSwSubcardRunningVerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes the sub card version information." ::= { zxAnCardSwObjects 3 } zxAnSwSubcardRunningVerEntry OBJECT-TYPE SYNTAX ZxAnSwSubcardRunningVerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in zxAnSwSubcardRunningVerTable." INDEX { zxAnSwCardRack, zxAnSwCardShelf, zxAnSwCardSlot, zxAnSwSubcardSlot } ::= { zxAnSwSubcardRunningVerTable 1 } ZxAnSwSubcardRunningVerEntry ::= SEQUENCE { zxAnSwSubcardSlot Integer32, zxAnSwSubcardFileName DisplayString, zxAnSwSubcardFileType DisplayString, zxAnSwSubcardVersion DisplayString, zxAnSwSubcardFileLen Integer32, zxAnSwSubcardBuildTime DateAndTime, zxAnSwSubcardBootwareFileName DisplayString, zxAnSwSubcardBootwareFileType DisplayString, zxAnSwSubcardBootwareVersion DisplayString, zxAnSwSubcardBootwareFileLen Integer32, zxAnSwSubcardBootwareBuildTime DateAndTime, zxAnSwSubcardFirmwareFileName DisplayString, zxAnSwSubcardFirmwareFileType DisplayString, zxAnSwSubcardFirmwareVersion DisplayString, zxAnSwSubcardFirmwareFileLen Integer32, zxAnSwSubcardFirmwareBuildTime DateAndTime } zxAnSwSubcardSlot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The slot number of the subcard" ::= { zxAnSwSubcardRunningVerEntry 1 } zxAnSwSubcardFileName OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The version file name of the card." ::= { zxAnSwSubcardRunningVerEntry 3 } zxAnSwSubcardFileType OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The version file type of the card." ::= { zxAnSwSubcardRunningVerEntry 4 } zxAnSwSubcardVersion OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The version tag of the card." ::= { zxAnSwSubcardRunningVerEntry 5 } zxAnSwSubcardFileLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The version file length of the card." ::= { zxAnSwSubcardRunningVerEntry 6 } zxAnSwSubcardBuildTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time of version build. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)." ::= { zxAnSwSubcardRunningVerEntry 7 } zxAnSwSubcardBootwareFileName OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The bootrom file name of the card." ::= { zxAnSwSubcardRunningVerEntry 8 } zxAnSwSubcardBootwareFileType OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The bootrom file type of the card." ::= { zxAnSwSubcardRunningVerEntry 9 } zxAnSwSubcardBootwareVersion OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The bootrom tag of the card." ::= { zxAnSwSubcardRunningVerEntry 10 } zxAnSwSubcardBootwareFileLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The bootrom file length of the card." ::= { zxAnSwSubcardRunningVerEntry 11 } zxAnSwSubcardBootwareBuildTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time of version build. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)." ::= { zxAnSwSubcardRunningVerEntry 12 } zxAnSwSubcardFirmwareFileName OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The firmware file name of the card." ::= { zxAnSwSubcardRunningVerEntry 13 } zxAnSwSubcardFirmwareFileType OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The firmware file type of the card." ::= { zxAnSwSubcardRunningVerEntry 14 } zxAnSwSubcardFirmwareVersion OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The firmware tag of the card." ::= { zxAnSwSubcardRunningVerEntry 15 } zxAnSwSubcardFirmwareFileLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The firmware file length of the card." ::= { zxAnSwSubcardRunningVerEntry 16 } zxAnSwSubcardFirmwareBuildTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time of version build. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)." ::= { zxAnSwSubcardRunningVerEntry 17 } ------------------------------------------------------------------------------- -- 3.Saved Software information Table ------------------------------------------------------------------------------- zxAnSwImageTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnSwImageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes the saved version information in version area MP." ::= { zxAnCardSwObjects 4 } zxAnSwImageEntry OBJECT-TYPE SYNTAX ZxAnSwImageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in zxAnSwImageTable." INDEX {zxAnSwCardRack,zxAnSwCardShelf,zxAnSwCardSlot, zxAnSwImageFileName} ::= { zxAnSwImageTable 1 } ZxAnSwImageEntry ::= SEQUENCE { zxAnSwImageFileName DisplayString, zxAnSwImageFileType DisplayString, zxAnSwImageVersion DisplayString, zxAnSwImageFileLen Integer32, zxAnSwImageBuildTime DateAndTime, zxAnSwImageActiveStatus INTEGER, zxAnSwImageDownloadTime DateAndTime } zxAnSwImageFileName OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { zxAnSwImageEntry 1 } zxAnSwImageFileType OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The version file type on the saved area." ::= { zxAnSwImageEntry 2 } zxAnSwImageVersion OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The version tag on the saved area." ::= { zxAnSwImageEntry 3 } zxAnSwImageFileLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The version file length on the saved area." ::= { zxAnSwImageEntry 4 } zxAnSwImageBuildTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time of version build. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)." ::= { zxAnSwImageEntry 5 } zxAnSwImageActiveStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2), none(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of saved MP version on the saved area. active(1): active MP version. inactive(2): inactive MP version. none(3): NP version, don't have active attribute. " ::= { zxAnSwImageEntry 6 } zxAnSwImageDownloadTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The downloading time of the version file." ::= { zxAnSwImageEntry 7 } ------------------------------------------------------------------------------- -- 4 Software Manual Update Management Table ------------------------------------------------------------------------------- zxAnSwManualUpdateRack OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The rack number. The multi-variables binding rule should be complied with when a manager manual updates software. According to this rule,all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To manual update software, the mandatory and optional variables are as follows: mandatoty: zxAnSwManualUpdateRack, zxAnSwManualUpdateShelf, zxAnSwManualUpdateSlotList, zxAnSwManualUpdateSwType optional : none To manual update subcard software, the mandatory and optional variables are as follows: mandatoty: zxAnSwManualUpdateRack, zxAnSwManualUpdateShelf, zxAnSwManualUpdateSlotList, zxAnSwManualUpdateSwType, zxAnSwManualUpdateSubcardList optional : none " ::= { zxAnSwManualUpdateGlobalObjects 1 } zxAnSwManualUpdateShelf OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The shelf number. This variable must comply with the multi-variables binding rule described in zxAnSwManualUpdateRack." ::= { zxAnSwManualUpdateGlobalObjects 2 } zxAnSwManualUpdateSlotList OBJECT-TYPE SYNTAX DisplayString (SIZE (0 .. 64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The slot number. updating version file from MP to NP. They can be updated in batch. For example: '1,2,3' This variable must comply with the multi-variables binding rule described in zxAnSwManualUpdateRack." ::= { zxAnSwManualUpdateGlobalObjects 3 } zxAnSwManualUpdateSwType OBJECT-TYPE SYNTAX INTEGER { bootware(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The software type is special to update. This variable must comply with the multi-variables binding rule described in zxAnSwManualUpdateRack. bootware(1): update bootware." ::= { zxAnSwManualUpdateGlobalObjects 4 } zxAnSwManualUpdateSubcardList OBJECT-TYPE SYNTAX DisplayString (SIZE (0 .. 64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The subcard number. updating version file from MP to subcard. They can be updated in batch. For example: '1,2,3' This variable must comply with the multi-variables binding rule described in zxAnSwManualUpdateRack. If zxAnSwManualUpdateSlotList is '1,2' and zxAnSwManualUpdateSubcardList is '3,4', the actual operation object like 'slot.subcard' is '1.3', '1.4', '2.3', '2.4'." ::= { zxAnSwManualUpdateGlobalObjects 5 } ------------------------------------------------------------------------------- -- 5. Software Manual Update Status Table ------------------------------------------------------------------------------- zxAnSwManualUpdateStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnSwManualUpdateStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes the version updating status information." ::= { zxAnSwManualUpdateObjects 5 } zxAnSwManualUpdateStatusEntry OBJECT-TYPE SYNTAX ZxAnSwManualUpdateStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in zxAnSwManualUpdateStatusTable." INDEX { zxAnSwCardRack, zxAnSwCardShelf, zxAnSwCardSlot, zxAnSwManualUpdateSoftwareType } ::= { zxAnSwManualUpdateStatusTable 1 } ZxAnSwManualUpdateStatusEntry ::= SEQUENCE { zxAnSwManualUpdateSoftwareType INTEGER, zxAnSwManualUpdateStatus INTEGER, zxAnSwManualFailedReason INTEGER } zxAnSwManualUpdateSoftwareType OBJECT-TYPE SYNTAX INTEGER { bootware(1) -- Update bootware. } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The software type when updating version." ::= { zxAnSwManualUpdateStatusEntry 1 } zxAnSwManualUpdateStatus OBJECT-TYPE SYNTAX INTEGER {negotiating(1),downloading(2),failed(3), success(4),sameversion(5)} MAX-ACCESS read-only STATUS current DESCRIPTION "The version status when updating version. negotiating(1):negotiating not starting downloading(2):updating from MP failed(3): update failed success(4): update successly sameVersion(5):not need update " ::= { zxAnSwManualUpdateStatusEntry 2 } zxAnSwManualFailedReason OBJECT-TYPE SYNTAX INTEGER { noError(1), -- no error. noSupportCardHwVersion(2), -- control card doesn't support the current card hardware -- version. mismatchCardHwVersion (3), -- control card's configuration and the current card -- hardware version are mismatch. mismatchCardConfData (4), -- control card's configuration and the current card -- configuration data are mismatch. noSwInNe (5), -- software for this card doesn't exist in control card. cardUpdateSwFailed (6) -- the current card software update failed. } MAX-ACCESS read-only STATUS current DESCRIPTION "The reason when updating version failed." ::= { zxAnSwManualUpdateStatusEntry 3 } ------------------------------------------------------------------------------- -- 6. Subcard Software Manual Update Status Table ------------------------------------------------------------------------------- zxAnSwSubcardMUpdateStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnSwSubcardMUpdateStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes the subcard software updating status information." ::= { zxAnSwManualUpdateObjects 6 } zxAnSwSubcardMUpdateStatusEntry OBJECT-TYPE SYNTAX ZxAnSwSubcardMUpdateStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in zxAnSwSubcardMUpdateStatusTable." INDEX { zxAnSwCardRack, zxAnSwCardShelf, zxAnSwCardSlot, zxAnSwSubcardSlot, zxAnSwSubcardMUpdateSoftwareType } ::= { zxAnSwSubcardMUpdateStatusTable 1 } ZxAnSwSubcardMUpdateStatusEntry ::= SEQUENCE { zxAnSwSubcardMUpdateSoftwareType INTEGER, zxAnSwSubcardMUpdateStatus INTEGER, zxAnSwSubcardMUpdateFailedReason INTEGER } zxAnSwSubcardMUpdateSoftwareType OBJECT-TYPE SYNTAX INTEGER { bootware(1) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The software type when updating subcard software. bootware(1): update bootware." ::= { zxAnSwSubcardMUpdateStatusEntry 1 } zxAnSwSubcardMUpdateStatus OBJECT-TYPE SYNTAX INTEGER { negotiating(1), downloading(2), failed(3), success(4), sameversion(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The updating status when updating subcard software. negotiating(1): negotiating not starting. downloading(2): updating from MP. failed(3): update failed. success(4): update successfully. sameVersion(5): not need to update. " ::= { zxAnSwSubcardMUpdateStatusEntry 2 } zxAnSwSubcardMUpdateFailedReason OBJECT-TYPE SYNTAX INTEGER { noError(1), noSupportCardHwVersion(2), mismatchCardHwVersion(3), mismatchCardConfData(4), noSwInNe(5), cardUpdateSwFailed(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The reason when updating subcard software failed. noError(1): no error. noSupportCardHwVersion(2): control card doesn't support the current card hardware version. mismatchCardHwVersion(3): control card's configuration and the current card hardware version are mismatch. mismatchCardConfData(4): control card's configuration and the current card configuration data are mismatch. noSwInNe(5): software for this card doesn't exist in control card. cardUpdateSwFailed(6): the current card software update failed." ::= { zxAnSwSubcardMUpdateStatusEntry 3 } ------------------------------------------------------------------------------- -- 7. Software Automatic Update Check Management Table ------------------------------------------------------------------------------- zxAnSwAutoUpdateChkEnable OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the software periodic check function. The multi-variables binding rule should be complied with when a software periodic check. According to this rule, all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To configure software periodic check(except disable software periodic check function), the mandatory and optional variables are as follows: mandatoty: zxAnSwAutoUpdateChkEnable, zxAnSwAutoUpdateChkStartTime, zxAnSwAutoUpdateChkInterval optional : none " DEFVAL { disable } ::= { zxAnSwAutoUpdateChkObjects 1 } zxAnSwAutoUpdateChkStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-write STATUS current DESCRIPTION "The start time of software periodic check. For example:yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33). This variable must comply with the multi-variables binding rule described in zxAnSwAutoUpdateChkEnable. " ::= { zxAnSwAutoUpdateChkObjects 2 } zxAnSwAutoUpdateChkInterval OBJECT-TYPE SYNTAX Integer32(0..8760) UNITS "hours" MAX-ACCESS read-write STATUS current DESCRIPTION "The interval of software periodic check. Value 0 means unconfigured. Unit is hour. This variable must comply with the multi-variables binding rule described in zxAnSwAutoUpdateChkEnable. " DEFVAL { 24 } ::= { zxAnSwAutoUpdateChkObjects 3 } zxAnSwAutoUpdateCurrChkStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The start time of current software periodic check. For example:yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)." ::= { zxAnSwAutoUpdateChkObjects 20 } zxAnSwAutoUpdateChkDifferFiles OBJECT-TYPE SYNTAX DisplayString(SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The different files name between NE and file server. File name is separated by ',', For example:xxx,xxx,xxx." ::= { zxAnSwAutoUpdateChkObjects 21 } zxAnSwAutoUpdateChkStatus OBJECT-TYPE SYNTAX INTEGER { notStarted(1), inProgress(2), success(3), failed(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of software periodic check. notStarted(1): Automatic update check not start inProgress(2): Automatic update check in progress success(3): Automatic update check successful failed(4): Automatic update check failed " ::= { zxAnSwAutoUpdateChkObjects 22 } zxAnSwAutoUpdateChkFailedReason OBJECT-TYPE SYNTAX INTEGER { noError(1), fileServerUnconfigured(2), fileServerConnectFailed(3), fileServerLoginFailed(4), fileServerPathError(5), fileServerProtocolTypeError(6), deviceCheckFailed(7), otherErrors(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "The failed reason of software periodic check. noError(1): Automatic update check successful or not start fileServerUnconfigured(2): Automatic update file server is not configure fileServerConnectFailed(3): File server connect failed fileServerLoginFailed(4): File server configure is not correct fileServerPathError(5): File server configure path is not correct fileServerProtocolTypeError(6): File server configure protocol type is not correct deviceCheckFailed(7): NE flash error otherErrors(255): Error is not include above list " ::= { zxAnSwAutoUpdateChkObjects 23 } ------------------------------------------------------------------------------- -- 8. Software Automatic Update Management Table ------------------------------------------------------------------------------- zxAnSwAutoUpdateAction OBJECT-TYPE SYNTAX INTEGER{ start(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The automatic update action. It means to start the automatic update progress." ::= { zxAnSwAutoUpdateOperObjects 1 } zxAnSwAutoUpdateActiveEnable OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the software active function. Active means to reset card except control card." DEFVAL { enable } ::= { zxAnSwAutoUpdateOperObjects 2 } zxAnSwAutoUpdateSwBackupEnable OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the version file backup function." DEFVAL { enable } ::= { zxAnSwAutoUpdateOperObjects 3 } zxAnSwAutoUpdateStatus OBJECT-TYPE SYNTAX INTEGER{ notStarted(1), updateStarting(2), backingUpFile(3), versionFileAnalyzing(4), versionFileDownloading(5), versionFileDownloadComplete(6), masterSlaveSynchronizing(7), masterSlaveSyncComplete(8), versionFileLoading(9), bootUpdating(10), bootUpdateComplete(11), updateSuccess(12), readyToReboot(13), sameVersion(14), updateFailed(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of automatic update. notStarted(1): Not start updateStarting(2): Update Start backingUpFile(3): Backup software before update versionFileAnalyzing(4): Software analyzing versionFileDownloading(5): Software downloading versionFileDownloadComplete(6):Software download completed masterSlaveSynchronizing(7): Synchronize software to slave board masterSlaveSyncComplete(8): Synchronize software completed versionFileLoading(9): Load software to card bootUpdating(10): Update bootrom bootUpdateComplete(11): Update bootrom completed updateSuccess(12): Update successful readyToReboot(13): Update had beed finished,ready to reboot sameVersion(14): Update is not need for same version updateFailed(255): Update failed " ::= { zxAnSwAutoUpdateOperObjects 20 } zxAnSwAutoUpdateCurrFileName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of current file which is updated." ::= { zxAnSwAutoUpdateOperObjects 21 } zxAnSwAutoUpdateCurrFileSize OBJECT-TYPE SYNTAX Integer32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The size of current file which is updated." ::= { zxAnSwAutoUpdateOperObjects 22 } zxAnSwAutoUpdateCurrFileProgress OBJECT-TYPE SYNTAX Integer32(0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The updating progress of current file." ::= { zxAnSwAutoUpdateOperObjects 23 } zxAnSwAutoUpdateTotalFiles OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total count of files will be updated." ::= { zxAnSwAutoUpdateOperObjects 24 } zxAnSwAutoUpdateSuccessFiles OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of files which are updated successfully." ::= { zxAnSwAutoUpdateOperObjects 25 } zxAnSwAutoUpdateFailedReason OBJECT-TYPE SYNTAX INTEGER{ noError(1), backupDataError(2), backupLogError(3), backupConfigurationError(4), backupVersionFileError(5), backupOtherError(6), analyzingConfigurationError(7), analyzingVersionFileError(8), diskFull(9), downloadingVersionFileError(10), updateVersionFileError(11), updateBootError(12), masterSlaveSynchronizeError(13), updateConflict(14), unavailableServer(15), slaveCardNotInService(16), fileNotExist(17), otherErrors(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "The failed reason of automatic update. noError(1), Update is not start or successful backupDataError(2), Backup data failed backupLogError(3), Backup log failed backupConfigurationError(4), Backup configuration failed backupVersionFileError(5), Backup software failed backupOtherError(6), Backup file failed is not above list analyzingConfigurationError(7), Analyze configuration error analyzingVersionFileError(8), Analyze software error diskFull(9), NE disk is full downloadingVersionFileError(10),Download software failed updateVersionFileError(11), Update software failed updateBootError(12), Update bootrom failed masterSlaveSynchronizeError(13),Synchronize software to slave board failed updateConflict(14), Other update is executing unavailableServer(15), File server configure failed slaveCardNotInService(16), Slave board is not inservice fileNotExist(17), File not exist on server otherErrors(255) Other errors is not list above " ::= { zxAnSwAutoUpdateOperObjects 26 } ------------------------------------------------------------------------------- -- 9. Software Swap Management Table ------------------------------------------------------------------------------- zxAnSwSwapRack OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " The Rack No. is used for swap version . The multi-variables binding rule should be complied with when swap software. According to this rule, all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To swap software, the mandatory and optional variables are as follows: mandatoty:zxAnSwSwapRack, zxAnSwSwapShelf, zxAnSwSwapSlot optional :none " ::= { zxAnSwSwapGlobalObjects 1 } zxAnSwSwapShelf OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " The Shelf number is used for swap version. This variable must comply with the multi-variables binding rule described in zxAnSwSwapRack. " ::= { zxAnSwSwapGlobalObjects 2 } zxAnSwSwapSlot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " The slot number is used for swap version. This variable must comply with the multi-variables binding rule described in zxAnSwSwapRack. " ::= { zxAnSwSwapGlobalObjects 3 } ------------------------------------------------------------------------------ -- 10. Saved Patch Information Table ------------------------------------------------------------------------------ zxAnSwSavedPatchTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnSwSavedPatchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes the saved patch information." ::= { zxAnCardPatchObjects 2 } zxAnSwSavedPatchEntry OBJECT-TYPE SYNTAX ZxAnSwSavedPatchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in zxAnSwSavedPatchTable." INDEX { zxAnSwPatchRack,zxAnSwPatchShelf, zxAnSwPatchSlot,zxAnSwPatchName } ::= { zxAnSwSavedPatchTable 1 } ZxAnSwSavedPatchEntry ::= SEQUENCE { zxAnSwPatchRack Integer32, zxAnSwPatchShelf Integer32, zxAnSwPatchSlot Integer32, zxAnSwPatchName DisplayString, zxAnSwPatchOwnerSwVersion DisplayString, zxAnSwPatchVersion DisplayString, zxAnSwPatchSize Integer32, zxAnSwPatchBuildTime DateAndTime, zxAnSwPatchConfActiveStatus INTEGER, zxAnSwPatchDescription DisplayString } zxAnSwPatchRack OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The rack number." ::= { zxAnSwSavedPatchEntry 1 } zxAnSwPatchShelf OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The shelf number." ::= { zxAnSwSavedPatchEntry 2 } zxAnSwPatchSlot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The slot number." ::= { zxAnSwSavedPatchEntry 3 } zxAnSwPatchName OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The patch file name." ::= { zxAnSwSavedPatchEntry 4 } zxAnSwPatchOwnerSwVersion OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The software version of the patch belonging to." ::= { zxAnSwSavedPatchEntry 5 } zxAnSwPatchVersion OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The version tag of the patch." ::= { zxAnSwSavedPatchEntry 6 } zxAnSwPatchSize OBJECT-TYPE SYNTAX Integer32 UNITS "byte" MAX-ACCESS read-only STATUS current DESCRIPTION "The patch file length." ::= { zxAnSwSavedPatchEntry 7 } zxAnSwPatchBuildTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time of patch build. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)." ::= { zxAnSwSavedPatchEntry 8 } zxAnSwPatchConfActiveStatus OBJECT-TYPE SYNTAX INTEGER{ activated(1), deactivated(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The configured active status of the patch file. activated -- to activate the patch file. deactivated -- to deactivate the patch file." DEFVAL { deactivated } ::= { zxAnSwSavedPatchEntry 9 } zxAnSwPatchDescription OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 255 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The patch description." ::= { zxAnSwSavedPatchEntry 10 } ------------------------------------------------------------------------------ -- 11. Card Patch Running Status Information Table ------------------------------------------------------------------------------ zxAnSwCardPatchRunStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnSwCardPatchRunStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes the patch running status information of the card." ::= { zxAnCardPatchObjects 3 } zxAnSwCardPatchRunStatusEntry OBJECT-TYPE SYNTAX ZxAnSwCardPatchRunStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in zxAnSwCardPatchRunStatusTable." INDEX { zxAnSwPatchRack, zxAnSwPatchShelf, zxAnSwPatchSlot, zxAnSwCardPatchName } ::= { zxAnSwCardPatchRunStatusTable 1 } ZxAnSwCardPatchRunStatusEntry ::= SEQUENCE { zxAnSwCardPatchName DisplayString, zxAnSwCardPatchOwnerSwVersion DisplayString, zxAnSwCardPatchVersion DisplayString, zxAnSwCardPatchSize Integer32, zxAnSwCardPatchBuildTime DateAndTime, zxAnSwCardPatchActivatedTime DateAndTime, zxAnSwCardPatchDescription DisplayString, zxAnSwCardPatchRunningStatus INTEGER } zxAnSwCardPatchName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The patch file name of the card." ::= { zxAnSwCardPatchRunStatusEntry 1 } zxAnSwCardPatchOwnerSwVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The software version of the patch belonging to." ::= { zxAnSwCardPatchRunStatusEntry 2 } zxAnSwCardPatchVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The version tag of the patch." ::= { zxAnSwCardPatchRunStatusEntry 3 } zxAnSwCardPatchSize OBJECT-TYPE SYNTAX Integer32 UNITS "byte" MAX-ACCESS read-only STATUS current DESCRIPTION "The patch file length." ::= { zxAnSwCardPatchRunStatusEntry 4 } zxAnSwCardPatchBuildTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time of patch build. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)." ::= { zxAnSwCardPatchRunStatusEntry 5 } zxAnSwCardPatchActivatedTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time of the patch activated. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)." ::= { zxAnSwCardPatchRunStatusEntry 6 } zxAnSwCardPatchDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The patch description." ::= { zxAnSwCardPatchRunStatusEntry 7 } zxAnSwCardPatchRunningStatus OBJECT-TYPE SYNTAX INTEGER{ activatingSucceeded(1), activatingFailed(2), waitingToBeActivated(3), resettingCardNeeded(4), mismatched(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The patch running status. activatingSucceeded(1) : value 1 means the activating operation of the patch file is succeeded. activatingFailed(2) : value 2 means the activating operation of the patch file is failed. waitingToBeActivated(3): value 3 means the patch file is waiting to be activated. resettingCardNeeded(4) : value 4 means the patch file has been successfully activated and the card needs to be reset. mismatched(5) : value 5 means the version of the patch file is not matched with the version of the card software." ::= { zxAnSwCardPatchRunStatusEntry 8 } ------------------------------------------------------------------------------ -- 12. Subcard Running Patch Information Table ------------------------------------------------------------------------------ zxAnSwSubcardRunningPatchTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnSwSubcardRunningPatchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes the subcard patch information." ::= { zxAnCardPatchObjects 4 } zxAnSwSubcardRunningPatchEntry OBJECT-TYPE SYNTAX ZxAnSwSubcardRunningPatchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in zxAnSwSubcardRunningPatchTable." INDEX { zxAnSwPatchRack,zxAnSwPatchShelf, zxAnSwPatchSlot,zxAnSwPatchSubcardSlot, zxAnSwSubcardPatchName } ::= { zxAnSwSubcardRunningPatchTable 1 } ZxAnSwSubcardRunningPatchEntry ::= SEQUENCE { zxAnSwPatchSubcardSlot Integer32, zxAnSwSubcardPatchName DisplayString, zxAnSwSubcardPatchOwnerSwVersion DisplayString, zxAnSwSubcardPatchVersion DisplayString, zxAnSwSubcardPatchSize Integer32, zxAnSwSubcardPatchBuildTime DateAndTime, zxAnSwSubcardPatchActivatedTime DateAndTime, zxAnSwSubcardPatchDescription DisplayString } zxAnSwPatchSubcardSlot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The slot number of the subcard." ::= { zxAnSwSubcardRunningPatchEntry 1 } zxAnSwSubcardPatchName OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The file name of the patch " ::= { zxAnSwSubcardRunningPatchEntry 2 } zxAnSwSubcardPatchOwnerSwVersion OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The software version of the patch belonging to." ::= { zxAnSwSubcardRunningPatchEntry 3 } zxAnSwSubcardPatchVersion OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The version tag of the patch." ::= { zxAnSwSubcardRunningPatchEntry 4 } zxAnSwSubcardPatchSize OBJECT-TYPE SYNTAX Integer32 UNITS "byte" MAX-ACCESS read-only STATUS current DESCRIPTION "The patch file length." ::= { zxAnSwSubcardRunningPatchEntry 5 } zxAnSwSubcardPatchBuildTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time of patch build. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)." ::= { zxAnSwSubcardRunningPatchEntry 6 } zxAnSwSubcardPatchActivatedTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time of the patch activated. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)." ::= { zxAnSwSubcardRunningPatchEntry 7 } zxAnSwSubcardPatchDescription OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 255 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The patch description." ::= { zxAnSwSubcardRunningPatchEntry 8 } ------------------------------------------------------------------------------ -- 13. Saved Patch Package information Table ------------------------------------------------------------------------------ zxAnSwSavedPatchPackageTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnSwSavedPatchPackageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes the saved patch package information." ::= { zxAnCardPatchObjects 5 } zxAnSwSavedPatchPackageEntry OBJECT-TYPE SYNTAX ZxAnSwSavedPatchPackageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in zxAnSwSavedPatchPackageTable." INDEX { zxAnSwPatchRack, zxAnSwPatchShelf, zxAnSwPatchSlot, zxAnSwPatchPkgName } ::= { zxAnSwSavedPatchPackageTable 1 } ZxAnSwSavedPatchPackageEntry ::= SEQUENCE { zxAnSwPatchPkgName DisplayString, zxAnSwPatchPkgVersion DisplayString, zxAnSwPatchPkgSize Integer32, zxAnSwPatchPkgBuildTime DateAndTime, zxAnSwPatchPkgDescription DisplayString, zxAnSwPatchPkgConfActiveStatus INTEGER, zxAnSwPatchPkgActualActiveStatus INTEGER } zxAnSwPatchPkgName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the patch package." ::= { zxAnSwSavedPatchPackageEntry 1 } zxAnSwPatchPkgVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The version of the patch package." ::= { zxAnSwSavedPatchPackageEntry 2 } zxAnSwPatchPkgSize OBJECT-TYPE SYNTAX Integer32 UNITS "byte" MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the patch package." ::= { zxAnSwSavedPatchPackageEntry 3 } zxAnSwPatchPkgBuildTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The build time of patch package." ::= { zxAnSwSavedPatchPackageEntry 4 } zxAnSwPatchPkgDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The description of the patch package." ::= { zxAnSwSavedPatchPackageEntry 5 } zxAnSwPatchPkgConfActiveStatus OBJECT-TYPE SYNTAX INTEGER{ activated(1), deactivated(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The configured active status of the patch package. activated(1) : value 1 means the configured active status of the patch package is activated. deactivated(2) : value 2 means the configured active status of the patch package is deactivated." DEFVAL { deactivated } ::= { zxAnSwSavedPatchPackageEntry 6 } zxAnSwPatchPkgActualActiveStatus OBJECT-TYPE SYNTAX INTEGER{ activated(1), deactivated(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The actual active status of the patch package. activated(1) : value 1 means the patch package is activated. deactivated(2) : value 2 means the patch package is deactivated." ::= { zxAnSwSavedPatchPackageEntry 7 } ------------------------------------------------------------------------------ -- 14. Saved Patch Package File Information Table ------------------------------------------------------------------------------ zxAnSwSavedPatchPackageFileTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnSwSavedPatchPackageFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes the information of the file inside the patch package." ::= { zxAnCardPatchObjects 6 } zxAnSwSavedPatchPackageFileEntry OBJECT-TYPE SYNTAX ZxAnSwSavedPatchPackageFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in zxAnSwSavedPatchPackageFileTable." INDEX { zxAnSwPatchRack, zxAnSwPatchShelf, zxAnSwPatchSlot, zxAnSwPatchPkgName, zxAnSwPatchPkgFileName } ::= { zxAnSwSavedPatchPackageFileTable 1 } ZxAnSwSavedPatchPackageFileEntry ::= SEQUENCE { zxAnSwPatchPkgFileName DisplayString, zxAnSwPatchPkgFileBuildTime DateAndTime, zxAnSwPatchPkgFileNeedResetCard INTEGER, zxAnSwPatchPkgFileActiveStatus INTEGER } zxAnSwPatchPkgFileName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the file inside the patch package." ::= { zxAnSwSavedPatchPackageFileEntry 1 } zxAnSwPatchPkgFileBuildTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The build time of the file inside the patch package." ::= { zxAnSwSavedPatchPackageFileEntry 2 } zxAnSwPatchPkgFileNeedResetCard OBJECT-TYPE SYNTAX INTEGER{ yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the card needs to be reset. yes(1) : value 1 means need to reset the card. no(2) : value 2 means no need to reset the card." ::= { zxAnSwSavedPatchPackageFileEntry 3 } zxAnSwPatchPkgFileActiveStatus OBJECT-TYPE SYNTAX INTEGER{ activated(1), deactivated(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The patch file active status. activated(1) : value 1 means the patch file is activated. deactivated(2) : value 2 means the patch file is deactivated." ::= { zxAnSwSavedPatchPackageFileEntry 4 } ------------------------------------------------------------------------------- -- 21 Software Notification ------------------------------------------------------------------------------- zxAnSwAutoUpdateFinished NOTIFICATION-TYPE OBJECTS { zxAnSwAutoUpdateStatus,zxAnSwAutoUpdateFailedReason } STATUS current DESCRIPTION "A zxAnSwAutoUpdateFinished is sent when the agent has detected that the automatic update is finished." ::= { zxAnSwAutoUpdateTraps 1 } zxAnSwAutoUpdateSwDiffer NOTIFICATION-TYPE OBJECTS { zxAnSwAutoUpdateCurrChkStartTime, zxAnSwAutoUpdateChkDifferFiles } STATUS current DESCRIPTION "A zxAnSwAutoUpdateSwDiffer is sent when the agent has detected different version files between NE and file server." ::= { zxAnSwAutoUpdateTraps 2 } zxAnSwAutoUpdateSwChkFailed NOTIFICATION-TYPE OBJECTS { zxAnSwAutoUpdateCurrChkStartTime, zxAnSwAutoUpdateChkFailedReason } STATUS current DESCRIPTION "A zxAnSwAutoUpdateSwChkFailed is sent when the agent has detected that version check is failed." ::= { zxAnSwAutoUpdateTraps 3 } ------------------------------------------------------------------------------- -- 31. Software Conformance ------------------------------------------------------------------------------- zxAnSwConformance OBJECT IDENTIFIER ::= { zxAnSoftwareMib 4 } zxAnSwCompliances OBJECT IDENTIFIER ::= { zxAnSwConformance 1 } zxAnSwGroups OBJECT IDENTIFIER ::= { zxAnSwConformance 2 } zxAnSwCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which implement the ZTE-AN-SOFTWARE-MIB." MODULE -- this module MANDATORY-GROUPS { zxAnSwCardRunVerGroup, zxAnSwSubcardRunVerGroup, zxAnSwImageGroup, zxAnSwManualUpdateGroup, zxAnSwManualUpdateStatusGroup, zxAnSwAutoUpdateChkGroup, zxAnSwAutoUpdateOperGroup, zxAnSwSwapGroup, zxAnSwNotificationsGroup } ::= { zxAnSwCompliances 1 } zxAnSwCardRunVerGroup OBJECT-GROUP OBJECTS { zxAnSwCardFileName, zxAnSwCardFileType, zxAnSwCardVersion, zxAnSwCardFileLen, zxAnSwCardBuildTime, zxAnSwCardBootwareFileName, zxAnSwCardBootwareFileType, zxAnSwCardBootwareVersion, zxAnSwCardBootwareFileLen, zxAnSwCardBootwareBuildTime, zxAnSwCardFirmware1FileName, zxAnSwCardFirmware1FileType, zxAnSwCardFirmware1Version, zxAnSwCardFirmware1FileLen, zxAnSwCardFirmware1BuildTime, zxAnSwCardFirmware2FileName, zxAnSwCardFirmware2FileType, zxAnSwCardFirmware2Version, zxAnSwCardFirmware2FileLen, zxAnSwCardFirmware2BuildTime, zxAnSwCardFirmware3FileName, zxAnSwCardFirmware3FileType, zxAnSwCardFirmware3Version, zxAnSwCardFirmware3FileLen, zxAnSwCardFirmware3BuildTime } STATUS current DESCRIPTION "The collection of objects which are used to represent chassis version information, include card running version information." ::= { zxAnSwGroups 1 } zxAnSwSubcardRunVerGroup OBJECT-GROUP OBJECTS {zxAnSwSubcardFileName, zxAnSwSubcardFileType, zxAnSwSubcardVersion, zxAnSwSubcardFileLen, zxAnSwSubcardBuildTime, zxAnSwSubcardBootwareFileName, zxAnSwSubcardBootwareFileType, zxAnSwSubcardBootwareVersion, zxAnSwSubcardBootwareFileLen, zxAnSwSubcardBootwareBuildTime, zxAnSwSubcardFirmwareFileName, zxAnSwSubcardFirmwareFileType, zxAnSwSubcardFirmwareVersion, zxAnSwSubcardFirmwareFileLen, zxAnSwSubcardFirmwareBuildTime } STATUS current DESCRIPTION "The collection of objects which are used to represent chassis version information, include subcard running version information." ::= { zxAnSwGroups 2 } zxAnSwImageGroup OBJECT-GROUP OBJECTS {zxAnSwImageFileType, zxAnSwImageVersion, zxAnSwImageFileLen, zxAnSwImageBuildTime, zxAnSwImageActiveStatus } STATUS current DESCRIPTION "The collection of objects which are used to represent chassis version information, include card saved version information." ::= { zxAnSwGroups 3 } zxAnSwManualUpdateGroup OBJECT-GROUP OBJECTS {zxAnSwManualUpdateRack, zxAnSwManualUpdateShelf, zxAnSwManualUpdateSlotList, zxAnSwManualUpdateSwType } STATUS current DESCRIPTION "The collection of objects which are used to update software by manual." ::= { zxAnSwGroups 4 } zxAnSwManualUpdateStatusGroup OBJECT-GROUP OBJECTS {zxAnSwManualUpdateStatus, zxAnSwManualFailedReason } STATUS current DESCRIPTION "The collection of objects which are used to represent chassis software update status." ::= { zxAnSwGroups 5 } zxAnSwAutoUpdateChkGroup OBJECT-GROUP OBJECTS { zxAnSwAutoUpdateChkEnable, zxAnSwAutoUpdateChkStartTime, zxAnSwAutoUpdateChkInterval, zxAnSwAutoUpdateCurrChkStartTime, zxAnSwAutoUpdateChkDifferFiles, zxAnSwAutoUpdateChkStatus, zxAnSwAutoUpdateChkFailedReason } STATUS current DESCRIPTION "The collection of objects which are used to management version automatic updating. Automatic version check to list the different files name between NE and file server." ::= { zxAnSwGroups 6 } zxAnSwAutoUpdateOperGroup OBJECT-GROUP OBJECTS { zxAnSwAutoUpdateAction, zxAnSwAutoUpdateActiveEnable, zxAnSwAutoUpdateSwBackupEnable, zxAnSwAutoUpdateStatus, zxAnSwAutoUpdateCurrFileName, zxAnSwAutoUpdateCurrFileSize, zxAnSwAutoUpdateCurrFileProgress, zxAnSwAutoUpdateTotalFiles, zxAnSwAutoUpdateSuccessFiles, zxAnSwAutoUpdateFailedReason } STATUS current DESCRIPTION "The collection of objects which are used to management version automatic updating. Automatic version update to download version from file server and to take effect." ::= { zxAnSwGroups 7 } zxAnSwSwapGroup OBJECT-GROUP OBJECTS { zxAnSwSwapRack, zxAnSwSwapShelf, zxAnSwSwapSlot } STATUS current DESCRIPTION "The collection of objects which are used to swap version ." ::= { zxAnSwGroups 8 } zxAnSwNotificationsGroup OBJECT-GROUP OBJECTS { zxAnSwAutoUpdateFinished, zxAnSwAutoUpdateSwDiffer, zxAnSwAutoUpdateSwChkFailed } STATUS current DESCRIPTION "The notifications which indicate specific changes, include automatic update check,automatic update status." ::= { zxAnSwGroups 9 } END