-- $Id: ZYXEL-NWA-SERIES.mib,v 1.3 2008/01/14 11:20:00 LiKuang Tsai Exp $ -- ZyXEL Communications Corporation -- Private Enterprise MIB definition -- This file describes the ZyXEL Communications Corporation Enterprise MIB. -- It includes object identifiers and object definitions for the ZyXEL -- Enterprise MIB only, and should be used for compilation by a management -- tool in order to extend the tool to support the ZyXEL MIB. ZYXEL-NWA-SERIES_v1-4-2 DEFINITIONS ::=BEGIN IMPORTS enterprises, NetworkAddress, PhysAddress, IpAddress, Counter FROM RFC1155-SMI RowStatus, RowPointer, DateAndTime, TruthValue FROM SNMPv2-TC OBJECT-TYPE, TimeTicks FROM SNMPv2-SMI ifIndex FROM RFC1213-MIB; DisplayString ::= OCTET STRING -- tree structure zyxel OBJECT IDENTIFIER ::= { enterprises 890 } products OBJECT IDENTIFIER ::= { zyxel 1 } proWireless OBJECT IDENTIFIER ::= { products 9 } pwCommon OBJECT IDENTIFIER ::= { proWireless 1 } pwTraps OBJECT IDENTIFIER ::= { proWireless 2 } pwStations OBJECT IDENTIFIER ::= { proWireless 3 } pwRogueAPDetect OBJECT IDENTIFIER ::= { proWireless 4 } pwWlanControl OBJECT IDENTIFIER ::= { proWireless 5 } pwWlanStatistics OBJECT IDENTIFIER ::= { proWireless 6 } nwaSeries OBJECT IDENTIFIER ::= { proWireless 100 } nwa3100 OBJECT IDENTIFIER ::= { nwaSeries 1 } nwa3500 OBJECT IDENTIFIER ::= { nwaSeries 2 } nwa3160 OBJECT IDENTIFIER ::= { nwaSeries 3 } nwa3163 OBJECT IDENTIFIER ::= { nwaSeries 4 } nwa3550 OBJECT IDENTIFIER ::= { nwaSeries 5 } nwa3165 OBJECT IDENTIFIER ::= { nwaSeries 6 } nwa1100 OBJECT IDENTIFIER ::= { nwaSeries 7 } nwa3166 OBJECT IDENTIFIER ::= { nwaSeries 8 } -- Node: ZyXEL -- Node: Products -- Node: proWireless -- Node: pwCommon This group contains information dealing -- wish the overall proWireless system, such as -- software versions, software and configuration download...etc. pwSwVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS current DESCRIPTION "The current software version." ::= { pwCommon 1 } pwCfgVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The current WLAN configuration version." ::= { pwCommon 2 } pwTftpServer OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "TFTP download server IP Address." ::= { pwCommon 3 } pwTftpFileName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "TFTP file name in TFTP server." ::= { pwCommon 4 } pwTftpFileType OBJECT-TYPE SYNTAX INTEGER { software(1), romfile(2), textconfig(3) } ACCESS read-write STATUS mandatory DESCRIPTION "File type in TFTP server." ::= { pwCommon 5 } pwTftpOpStatus OBJECT-TYPE SYNTAX INTEGER { idle(0), inprogress(1), failed(2) success(3), timeout(4) } ACCESS read-only STATUS mandatory DESCRIPTION "TFTP Operation Status." ::= { pwCommon 6 } pwTftpOpCommand OBJECT-TYPE SYNTAX INTEGER { upload(1), download(2) } ACCESS read-write STATUS mandatory DESCRIPTION "TFTP Operation Command." ::= { pwCommon 7 } pwSystemReboot OBJECT-TYPE SYNTAX INTEGER { running(0), reboot(1) } ACCESS read-write STATUS mandatory DESCRIPTION "System Reboot." ::= { pwCommon 8 } pwAutoCfgMessage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The last error massage of Auto Configuration process." ::= { pwCommon 9 } pwCPUUsage OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Display the CPU usage information" ::= { pwCommon 10 } pwMemoryUsage OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Display the memory usage information" ::= { pwCommon 11 } pwSystemCountry OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The country of wlan" ::= { pwCommon 13 } pwPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS write-only STATUS mandatory DESCRIPTION "Change system password." ::= { pwCommon 14 } -- -- The following table represent the associated station list -- pwStationTable OBJECT-TYPE SYNTAX SEQUENCE OF PwStationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the associated stations." ::= { pwStations 2 } pwStationEntry OBJECT-TYPE SYNTAX PwStationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry describing the station information." INDEX { pwStationIndex } ::= { pwStationTable 1 } PwStationEntry ::= SEQUENCE { pwStationIndex Integer32, -- docsDevNmAccessIp IpAddress, -- docsDevNmAccessIpMask IpAddress, pwStationMacAddress OCTET STRING, pwStationAssociateTime DateAndTime, pwStationSSID OCTET STRING, pwStationStatus RowStatus } pwStationIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of stations." ::= { pwStationEntry 1 } pwStationMacAddress OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC Addresss of the station." DEFVAL { "public" } ::= { pwStationEntry 2 } pwStationAssociateTime OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The associated time of the station." ::= { pwStationEntry 3 } pwStationSSID OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The associated ssid." ::= { pwStationEntry 4 } pwStationStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Controls and reflects the status of rows in this the row is active." ::= { pwStationEntry 5 } -- -- Node: pwRogueAPDetect This group defines the neighbor AP detection -- --pwRogueAPDetectInterval OBJECT-TYPE -- SYNTAX INTEGER { -- disable(0) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "AP Detection Interval, time unit is minute. -- The range is 10-60 minutes." -- ::= { pwRogueAPDetect 1 } pwRogueAPPeriodTable OBJECT-TYPE SYNTAX SEQUENCE OF PwRogueAPPeriodEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the rogue AP Period Detection." ::= { pwRogueAPDetect 1 } pwRogueAPPeriodEntry OBJECT-TYPE SYNTAX PwRogueAPPeriodEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry describing the control for rogue AP Period Detection." INDEX { ifIndex } ::= { pwRogueAPPeriodTable 1 } PwRogueAPPeriodEntry ::= SEQUENCE { pwRogueAPPeriodDetection INTEGER, pwRogueAPPeriod INTEGER, pwRogueAPExpirationTime INTEGER } pwRogueAPPeriodDetection OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Control rogue AP Period Detection. enable(1) or disable(0)." ::= { pwRogueAPPeriodEntry 1 } pwRogueAPPeriod OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Rogue AP period time. 10~60(min)." ::= { pwRogueAPPeriodEntry 2 } pwRogueAPExpirationTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Rogue AP Expiration time. 30~180(min)." ::= { pwRogueAPPeriodEntry 3 } pwRogueAPDetectTable OBJECT-TYPE SYNTAX SEQUENCE OF PwRogueAPDetectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the neighbor AP." ::= { pwRogueAPDetect 2 } pwRogueAPDetectEntry OBJECT-TYPE SYNTAX PwRogueAPDetectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry describing the neighbor AP information." INDEX { pwRogueAPIndex } ::= { pwRogueAPDetectTable 1 } PwRogueAPDetectEntry ::= SEQUENCE { pwRogueAPIndex INTEGER, pwRogueAPSSID OCTET STRING, pwRogueAPMacAddress OCTET STRING, pwRogueAPChannel OCTET STRING, -- pwRogueAPDetectSignal Integer32, -- pwRogueAPDetectNetwork INTEGER, pwRogueAPSecurity OCTET STRING, pwRogueAPSignal OCTET STRING } pwRogueAPIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of neighbor AP table." ::= { pwRogueAPDetectEntry 1 } pwRogueAPSSID OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The SSID. If SSID of the AP is hidden, it will be displayed as '(Hidden SSID)'." ::= { pwRogueAPDetectEntry 2 } pwRogueAPMacAddress OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address." ::= { pwRogueAPDetectEntry 3 } pwRogueAPChannel OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The frequency channel ID." ::= { pwRogueAPDetectEntry 4 } pwRogueAPSecurity OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The data security mode." ::= { pwRogueAPDetectEntry 5 } pwRogueAPSignal OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The data signal." ::= { pwRogueAPDetectEntry 6 } pwFriendlyAPTable OBJECT-TYPE SYNTAX SEQUENCE OF PwFriendlyAPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the neighbor Friendly AP." ::= { pwRogueAPDetect 3 } pwFriendlyAPEntry OBJECT-TYPE SYNTAX PwFriendlyAPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry describing the neighbor Friendly AP information." INDEX { pwFriendlyAPIndex } ::= { pwFriendlyAPTable 1 } PwFriendlyAPEntry ::= SEQUENCE { pwFriendlyAPIndex INTEGER, pwFriendlyAPSSID OCTET STRING, pwFriendlyAPMacAddress OCTET STRING, pwFriendlyAPChannel OCTET STRING, pwFriendlyAPSecurity OCTET STRING, pwFriendlyAPSignal OCTET STRING, pwFriendlyAPDescription OCTET STRING } pwFriendlyAPIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of neighbor friendly AP table." ::= { pwFriendlyAPEntry 1 } pwFriendlyAPSSID OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The SSID. If SSID of the friendly AP is hidden, it will be displayed as '(Hidden SSID)'." ::= { pwFriendlyAPEntry 2 } pwFriendlyAPMacAddress OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The friendly AP MAC address. When setting this item, a new entry of frienly AP will be added." ::= { pwFriendlyAPEntry 3 } pwFriendlyAPChannel OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The frequency channel ID." ::= { pwFriendlyAPEntry 4 } pwFriendlyAPSecurity OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The data security mode." ::= { pwFriendlyAPEntry 5 } pwFriendlyAPSignal OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The data signal." ::= { pwFriendlyAPEntry 6 } pwFriendlyAPDescription OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Description of friendly AP. When setting this item, the description field of relative entry will be updated" ::= { pwFriendlyAPEntry 7 } -- -- Node: pwMacFilter This group defines the MAC Filter -- pwWlanControlTable OBJECT-TYPE SYNTAX SEQUENCE OF PwWlanControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists WLAN control information. Use chipIndex as the index of each entry" ::= { pwWlanControl 1 } pwWlanControlEntry OBJECT-TYPE SYNTAX PwWlanControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry describing WLAN control information for each chip." INDEX { ifIndex } ::= { pwWlanControlTable 1 } PwWlanControlEntry ::= SEQUENCE { pwWlanMode INTEGER, pwWlanSupportedChannel OCTET STRING, pwWlanChannel INTEGER, pwWlanTxPower INTEGER, pwAutoChannelSelection INTEGER, pwCurrentChannel INTEGER, pwStationCount Counter32, pwWlanSupportedMode OCTET STRING } pwWlanMode OBJECT-TYPE SYNTAX INTEGER { mode_802_11b(1), mode_802_11g(2), mode_802_11bg(3), mode_802_11a(4), mode_802_11ng(6), mode_802_11na(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "The mode of wlan right now." ::= { pwWlanControlEntry 1 } pwWlanSupportedChannel OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The all channel supported by wlan" ::= { pwWlanControlEntry 3 } pwWlanChannel OBJECT-TYPE SYNTAX INTEGER { channel-01_2412mhz(1), channel-02_2417mhz(2), channel-03_2422mhz(3), channel-04_2427mhz(4), channel-05_2432mhz(5), channel-06_2437mhz(6), channel-07_2442mhz(7), channel-08_2447mhz(8), channel-09_2452mhz(9), channel-10_2457mhz(10), channel-11_2462mhz(11), channel-12_2467mhz(12), channel-13_2472mhz(13), channel-36_5180mhz(36), channel-40_5200mhz(40), channel-44_5220mhz(44), channel-48_5240mhz(48), channel-52_5260mhz(52), channel-56_5280mhz(56), channel-60_5300mhz(60), channel-64_5320mhz(64), channel-100_5500mhz(100), channel-104_5520mhz(104), channel-108_5540mhz(108), channel-112_5560mhz(112), channel-116_5580mhz(116), channel-120_5600mhz(120), channel-124_5620mhz(124), channel-128_5640mhz(128), channel-132_5660mhz(132), channel-136_5680mhz(136), channel-140_5700mhz(140), channel-149_5745mhz(149), channel-153_5765mhz(153), channel-157_5785mhz(157), channel-161_5805mhz(161), channel-165_5825mhz(165) } MAX-ACCESS read-write STATUS current DESCRIPTION "The current channel of wlan right now. When setting this parameter, the value should be a subset of all supported channel" ::= { pwWlanControlEntry 4 } pwWlanTxPower OBJECT-TYPE SYNTAX INTEGER { full(1), half(2), quarter(4), eighth(8), minimum(16) } MAX-ACCESS read-write STATUS current DESCRIPTION "To specify the RF transmission power." ::= { pwWlanControlEntry 5 } pwAutoChannelSelection OBJECT-TYPE SYNTAX INTEGER { disable(0), enble(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable Auto Channel Selection." ::= { pwWlanControlEntry 6 } pwCurrentChannel OBJECT-TYPE SYNTAX INTEGER { device_is_disable(0), channel-01_2412mhz(1), channel-02_2417mhz(2), channel-03_2422mhz(3), channel-04_2427mhz(4), channel-05_2432mhz(5), channel-06_2437mhz(6), channel-07_2442mhz(7), channel-08_2447mhz(8), channel-09_2452mhz(9), channel-10_2457mhz(10), channel-11_2462mhz(11), channel-12_2467mhz(12), channel-13_2472mhz(13), channel-36_5180mhz(36), channel-40_5200mhz(40), channel-44_5220mhz(44), channel-48_5240mhz(48), channel-52_5260mhz(52), channel-56_5280mhz(56), channel-60_5300mhz(60), channel-64_5320mhz(64), channel-100_5500mhz(100), channel-104_5520mhz(104), channel-108_5540mhz(108), channel-112_5560mhz(112), channel-116_5580mhz(116), channel-120_5600mhz(120), channel-124_5620mhz(124), channel-128_5640mhz(128), channel-132_5660mhz(132), channel-136_5680mhz(136), channel-140_5700mhz(140), channel-149_5745mhz(149), channel-153_5765mhz(153), channel-157_5785mhz(157), channel-161_5805mhz(161), channel-165_5825mhz(165) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current Operating channel." ::= { pwWlanControlEntry 7 } pwStationCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of ssocited stations" ::= { pwWlanControlEntry 8 } pwWlanSupportedMode OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The all mode supported by wlan" ::= { pwWlanControlEntry 9 } -- -- Node: pwWlanStatistics Copy from dot11CountersTable -- pwWlanStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF PwWlanStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists WLAN statistics information. Use chipIndex as the index of each entry" ::= { pwWlanStatistics 1 } pwWlanStatisticsEntry OBJECT-TYPE SYNTAX PwWlanStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry describing WLAN statistics information." INDEX { ifIndex } ::= { pwWlanStatisticsTable 1 } PwWlanStatisticsEntry ::= SEQUENCE { pwDot11FailedCount Counter32, pwDot11RetryCount Counter32, pwDot11ACKFailureCount Counter32, pwDot11ReceivedFragmentCount Counter32, pwDot11TransmittedFrameCount Counter32, pwDot11ReceivedPktCount Counter32, pwDot11TransmittedPktCount Counter32, pwDot11ReceptionRate Counter32, pwDot11TransmissionRate Counter32 } pwDot11FailedCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter shall increment when an MSDU is not transmitted successfully due to the number of transmit attempts exceeding either the dot11ShortRetryLimit or dot11LongRetryLimit. " ::= { pwWlanStatisticsEntry 1 } pwDot11RetryCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter shall increment when an MSDU is successfully transmitted after one or more retransmissions." ::= { pwWlanStatisticsEntry 2 } pwDot11ACKFailureCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter shall increment when an ACK is not received when expected." ::= { pwWlanStatisticsEntry 3 } pwDot11ReceivedFragmentCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter shall be incremented for each successfully received MPDU of type Data or Management." ::= { pwWlanStatisticsEntry 4 } pwDot11TransmittedFrameCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter shall increment for each successfully transmitted MSDU." ::= { pwWlanStatisticsEntry 5 } pwDot11ReceivedPktCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter shall increment for each successfully received packets every five minutes." ::= { pwWlanStatisticsEntry 6 } pwDot11TransmittedPktCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter shall increment for each successfully transmitted packets every five minutes." ::= { pwWlanStatisticsEntry 7 } pwDot11ReceptionRate OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Reception Rate in Byte per second." ::= { pwWlanStatisticsEntry 8 } pwDot11TransmissionRate OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Transmission Rate in Byte per second." ::= { pwWlanStatisticsEntry 9 } -- Node: pwTraps This group defines information of pro wireless product -- specific snmpv2 notifications. -- Including control variables to enable / disable -- sending trap. pwTrapControl OBJECT IDENTIFIER ::= { pwTraps 1 } pwTrapVariables OBJECT IDENTIFIER ::= { pwTraps 2 } pwTrapTypes OBJECT IDENTIFIER ::= { pwTraps 3 } pwWirelessTraps OBJECT IDENTIFIER ::= { pwTrapTypes 1 } pwSecurityTraps OBJECT IDENTIFIER ::= { pwTrapTypes 2 } pwTFTPTraps OBJECT IDENTIFIER ::= { pwTrapTypes 3 } -- Control pwTrapWirelessStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls wireless group traps enable or disable." ::= { pwTrapControl 1 } pwTrapSecurityStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls security group traps enable or disable." ::= { pwTrapControl 2 } pwTrapTFTPStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls TFTP group traps enable or disable." ::= { pwTrapControl 3 } -- Trap variables pwTrapGenericMessage OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Provide generic information on traps." ::= { pwTrapVariables 1 } pwTrapMACAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents MAC address of the device or the host which triggers the trap." ::= { pwTrapVariables 2 } pwTrapWlanSSID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The SSID name which the wireless client associates." ::= { pwTrapVariables 3 } -- Wireless Traps -- Assocication, Disassociation pwWlanStaAssociation NOTIFICATION-TYPE STATUS current DESCRIPTION "Wireless client assocication notification." ::= { pwWirelessTraps 1 } pwWlanStaDisassociation NOTIFICATION-TYPE STATUS current DESCRIPTION "Wireless client disassocication notification." ::= { pwWirelessTraps 2 } -- Security Traps -- Client authenticate failed pwWlanStaAuthFail NOTIFICATION-TYPE STATUS current DESCRIPTION "Wireless client authentication failed." ::= { pwSecurityTraps 1 } -- TFTP Traps -- Status pwTFTPStatus NOTIFICATION-TYPE OBJECTS {pwTrapGenericMessage, pwTftpOpStatus, pwTftpServer, pwTftpFileName, pwTftpFileType, pwTftpOpCommand } STATUS current DESCRIPTION "Send when TFTP operation completed, or stopped due to some reason. For example, timeout or wrong configuration." ::= { pwTFTPTraps 1 } END