853 lines
31 KiB
Plaintext
853 lines
31 KiB
Plaintext
F3-POPM-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, Counter64
|
|
FROM SNMPv2-SMI
|
|
DateAndTime, TruthValue, VariablePointer, TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
neIndex, shelfIndex, slotIndex
|
|
FROM CM-ENTITY-MIB
|
|
cmEthernetAccPortEntry, cmEthernetNetPortEntry
|
|
FROM CM-FACILITY-MIB
|
|
cmEthernetAccPortStatsEntry, cmEthernetNetPortStatsEntry,
|
|
cmEthernetAccPortHistoryEntry, cmEthernetNetPortHistoryEntry
|
|
FROM CM-PERFORMANCE-MIB
|
|
fsp150cm
|
|
FROM ADVA-MIB
|
|
PerfCounter64
|
|
FROM CM-COMMON-MIB;
|
|
|
|
|
|
f3POPMMib MODULE-IDENTITY
|
|
LAST-UPDATED "201110100000Z"
|
|
ORGANIZATION "ADVA Optical Networking"
|
|
CONTACT-INFO
|
|
" Raghav Trivedi
|
|
ADVA Optical Networking, Inc.
|
|
Tel: +1 972 759-1239
|
|
E-mail: rtrivedi@advaoptical.com
|
|
Postal: 2301 N. Greenville Ave. #300
|
|
Richardson, TX USA 75082"
|
|
DESCRIPTION
|
|
"This module documents the Precision Optical Power
|
|
Monitoring features provided by the F3 product line
|
|
of products.
|
|
Copyright (C) ADVA Optical Networking."
|
|
REVISION "201110100000Z"
|
|
DESCRIPTION
|
|
"Notes from release 201110100000Z,
|
|
(1)Added following variables for clearing POPM alarms
|
|
f3EthernetAccPortPOPMonitorClearAction,
|
|
f3EthernetNetPortPOPMonitorClearAction
|
|
|
|
Notes from release 201109060000Z,
|
|
(1)Initial MIB version for release FSP150CM 3.4."
|
|
::= {fsp150cm 16}
|
|
|
|
--
|
|
-- OID definitions
|
|
--
|
|
f3POPMObjects OBJECT IDENTIFIER ::= {f3POPMMib 1}
|
|
f3POPMPerfObjects OBJECT IDENTIFIER ::= {f3POPMMib 2}
|
|
f3POPMConformance OBJECT IDENTIFIER ::= {f3POPMMib 3}
|
|
|
|
--
|
|
-- Textual Conventions
|
|
--
|
|
POPMGlitchRejectionLevel ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Provides ability to manage the glitch rejection level,
|
|
none -- no glitch rejection
|
|
low -- single glitch rejection
|
|
medium -- three glitch rejection
|
|
high -- five glitch rejection
|
|
."
|
|
SYNTAX INTEGER {
|
|
none (1),
|
|
low (2),
|
|
medium (3),
|
|
high (4)
|
|
}
|
|
|
|
POPMState ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Provides the enumerations for POPM State
|
|
not-applicable --not applicable state
|
|
inoperable --enabled, port is unassigned
|
|
not-available --not available state
|
|
calibrating --enabled, operational, computing
|
|
monitoring --enabled, operational, monitoring
|
|
paused --enabled, signal out-of-range,
|
|
signal out-of-variance
|
|
inhibited-R --enabled, LOS (revertive)
|
|
inhibited-NR --enabled, sampling error (non-revertive)
|
|
."
|
|
SYNTAX INTEGER {
|
|
not-applicable (1),
|
|
inoperable (2),
|
|
not-available (3),
|
|
calibrating (4),
|
|
monitoring (5),
|
|
paused (6),
|
|
inhibited-R (7),
|
|
inhibited-NR (8)
|
|
}
|
|
|
|
POPMClearAlarmsAction ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Provides ability to clear the alarms on POPR function."
|
|
SYNTAX INTEGER {
|
|
not-applicable(0),
|
|
clear (1)
|
|
}
|
|
|
|
--
|
|
-- Ethernet Access Port - Precision Optical Power Monitor
|
|
--
|
|
f3EthernetAccPortPOPMonitorTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF F3EthernetAccPortPOPMonitorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides ability to manage the
|
|
Precision Optical Power feature on
|
|
Ethernet Access Ports."
|
|
::= { f3POPMObjects 2 }
|
|
|
|
f3EthernetAccPortPOPMonitorEntry OBJECT-TYPE
|
|
SYNTAX F3EthernetAccPortPOPMonitorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row in the f3EthernetAccPortPOPMonitorTable."
|
|
AUGMENTS { cmEthernetAccPortEntry }
|
|
::= { f3EthernetAccPortPOPMonitorTable 1 }
|
|
|
|
F3EthernetAccPortPOPMonitorEntry ::= SEQUENCE {
|
|
f3EthernetAccPortPOPMonitorEnabled TruthValue,
|
|
f3EthernetAccPortPOPMonitorOperRangeHi Integer32,
|
|
f3EthernetAccPortPOPMonitorOperRangeLow Integer32,
|
|
f3EthernetAccPortPOPMonitorVariance Integer32,
|
|
f3EthernetAccPortPOPMonitorWindowSize Integer32,
|
|
f3EthernetAccPortPOPMonitorGlitchRejectionLevel POPMGlitchRejectionLevel,
|
|
f3EthernetAccPortPOPMonitorState POPMState,
|
|
f3EthernetAccPortPOPMonitorClearAction POPMClearAlarmsAction
|
|
}
|
|
|
|
f3EthernetAccPortPOPMonitorEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object enables/disables Precision Optical Power monitoring
|
|
on the Ethernet Access Port."
|
|
::= { f3EthernetAccPortPOPMonitorEntry 1 }
|
|
|
|
f3EthernetAccPortPOPMonitorOperRangeHi OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object provides the higher operating range, in 10ths of dbm,
|
|
for Precision Optical Power monitoring."
|
|
::= { f3EthernetAccPortPOPMonitorEntry 2 }
|
|
|
|
f3EthernetAccPortPOPMonitorOperRangeLow OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object provides the lower operating range, in 10ths of dbm, for
|
|
Precision Optical Power monitoring."
|
|
::= { f3EthernetAccPortPOPMonitorEntry 3 }
|
|
|
|
f3EthernetAccPortPOPMonitorVariance OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object provides the maximum absolute variance,
|
|
from average, in 10ths of dbm, for
|
|
Precision Optical Power monitoring."
|
|
::= { f3EthernetAccPortPOPMonitorEntry 4 }
|
|
|
|
f3EthernetAccPortPOPMonitorWindowSize OBJECT-TYPE
|
|
SYNTAX Integer32 (1..3600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object provides the window size (time in seconds), for
|
|
Precision Optical Power monitoring."
|
|
::= { f3EthernetAccPortPOPMonitorEntry 5 }
|
|
|
|
f3EthernetAccPortPOPMonitorGlitchRejectionLevel OBJECT-TYPE
|
|
SYNTAX POPMGlitchRejectionLevel
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object provides the maximum number of
|
|
sequential variance violations constituting a
|
|
glitch."
|
|
::= { f3EthernetAccPortPOPMonitorEntry 6 }
|
|
|
|
f3EthernetAccPortPOPMonitorState OBJECT-TYPE
|
|
SYNTAX POPMState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object provides the current state of the
|
|
Precision Optical Monitoring processing."
|
|
::= { f3EthernetAccPortPOPMonitorEntry 7 }
|
|
|
|
f3EthernetAccPortPOPMonitorClearAction OBJECT-TYPE
|
|
SYNTAX POPMClearAlarmsAction
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object provides the ability to clear outstanding
|
|
Precision Optical Monitoring alarms."
|
|
::= { f3EthernetAccPortPOPMonitorEntry 8 }
|
|
|
|
|
|
--
|
|
-- Ethernet Network Port - Precision Optical Power Monitor
|
|
--
|
|
f3EthernetNetPortPOPMonitorTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF F3EthernetNetPortPOPMonitorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides ability to manage the
|
|
Precision Optical Power feature on
|
|
Ethernet Network Ports."
|
|
::= { f3POPMObjects 1 }
|
|
|
|
f3EthernetNetPortPOPMonitorEntry OBJECT-TYPE
|
|
SYNTAX F3EthernetNetPortPOPMonitorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row in the f3EthernetNetPortPOPMonitorTable."
|
|
AUGMENTS { cmEthernetNetPortEntry }
|
|
::= { f3EthernetNetPortPOPMonitorTable 1 }
|
|
|
|
F3EthernetNetPortPOPMonitorEntry ::= SEQUENCE {
|
|
f3EthernetNetPortPOPMonitorEnabled TruthValue,
|
|
f3EthernetNetPortPOPMonitorOperRangeHi Integer32,
|
|
f3EthernetNetPortPOPMonitorOperRangeLow Integer32,
|
|
f3EthernetNetPortPOPMonitorVariance Integer32,
|
|
f3EthernetNetPortPOPMonitorWindowSize Integer32,
|
|
f3EthernetNetPortPOPMonitorGlitchRejectionLevel POPMGlitchRejectionLevel,
|
|
f3EthernetNetPortPOPMonitorState POPMState,
|
|
f3EthernetNetPortPOPMonitorClearAction POPMClearAlarmsAction
|
|
}
|
|
|
|
f3EthernetNetPortPOPMonitorEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object enables/disables Precision Optical Power monitoring
|
|
on the Ethernet Network Port."
|
|
::= { f3EthernetNetPortPOPMonitorEntry 1 }
|
|
|
|
f3EthernetNetPortPOPMonitorOperRangeHi OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object provides the higher operating range, in 10ths of dbm,
|
|
for Precision Optical Power monitoring."
|
|
::= { f3EthernetNetPortPOPMonitorEntry 2 }
|
|
|
|
f3EthernetNetPortPOPMonitorOperRangeLow OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object provides the lower operating range, in 10ths of dbm, for
|
|
Precision Optical Power monitoring."
|
|
::= { f3EthernetNetPortPOPMonitorEntry 3 }
|
|
|
|
f3EthernetNetPortPOPMonitorVariance OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object provides the maximum absolute variance,
|
|
from average, in 10ths of dbm, for
|
|
Precision Optical Power monitoring."
|
|
::= { f3EthernetNetPortPOPMonitorEntry 4 }
|
|
|
|
f3EthernetNetPortPOPMonitorWindowSize OBJECT-TYPE
|
|
SYNTAX Integer32 (1..3600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object provides the window size (time in seconds), for
|
|
Precision Optical Power monitoring."
|
|
::= { f3EthernetNetPortPOPMonitorEntry 5 }
|
|
|
|
f3EthernetNetPortPOPMonitorGlitchRejectionLevel OBJECT-TYPE
|
|
SYNTAX POPMGlitchRejectionLevel
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object provides the maximum number of
|
|
sequential variance violations constituting a
|
|
glitch."
|
|
::= { f3EthernetNetPortPOPMonitorEntry 6 }
|
|
|
|
f3EthernetNetPortPOPMonitorState OBJECT-TYPE
|
|
SYNTAX POPMState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object provides the current state of the
|
|
Precision Optical Monitoring processing."
|
|
::= { f3EthernetNetPortPOPMonitorEntry 7 }
|
|
|
|
f3EthernetNetPortPOPMonitorClearAction OBJECT-TYPE
|
|
SYNTAX POPMClearAlarmsAction
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object provides the ability to clear outstanding
|
|
Precision Optical Monitoring alarms."
|
|
::= { f3EthernetNetPortPOPMonitorEntry 8 }
|
|
|
|
--
|
|
-- Ethernet Access Port POPM Current Statistics Table
|
|
--
|
|
f3EthernetAccPortPOPMStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF F3EthernetAccPortPOPMStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of Ethernet Access Port Precision Optical Power
|
|
related statistics.
|
|
These reflect the current data."
|
|
::= { f3POPMPerfObjects 1 }
|
|
|
|
f3EthernetAccPortPOPMStatsEntry OBJECT-TYPE
|
|
SYNTAX F3EthernetAccPortPOPMStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row in the f3EthernetAccPortPOPMStatsTable.
|
|
Entries exist in this table for each Ethernet interface/port."
|
|
AUGMENTS { cmEthernetAccPortStatsEntry }
|
|
::= { f3EthernetAccPortPOPMStatsTable 1 }
|
|
|
|
F3EthernetAccPortPOPMStatsEntry ::= SEQUENCE {
|
|
f3EthernetAccPortPOPMStatsOPR Integer32,
|
|
f3EthernetAccPortPOPMStatsAOPR Integer32,
|
|
f3EthernetAccPortPOPMStatsOPRVar Integer32,
|
|
f3EthernetAccPortPOPMStatsOPRMaxVar Integer32,
|
|
f3EthernetAccPortPOPMStatsOPRGlitchRejects Unsigned32,
|
|
f3EthernetAccPortPOPMStatsOPRRTR Unsigned32,
|
|
f3EthernetAccPortPOPMStatsOPROOR Unsigned32,
|
|
f3EthernetAccPortPOPMStatsOPROOV Unsigned32
|
|
}
|
|
|
|
f3EthernetAccPortPOPMStatsOPR OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Precision Optical Power Receive (in dBm) for the physical layer.
|
|
This is applicable only if Precision Optical Power monitoring
|
|
is enabled."
|
|
::= { f3EthernetAccPortPOPMStatsEntry 1 }
|
|
|
|
f3EthernetAccPortPOPMStatsAOPR OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average Precision Optical Power Receive (in dBm) for the physical
|
|
layer. This is applicable only if Precision Optical Power
|
|
monitoring is enabled."
|
|
::= { f3EthernetAccPortPOPMStatsEntry 2 }
|
|
|
|
f3EthernetAccPortPOPMStatsOPRVar OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Signed variance of Optical Power Receive, from average.
|
|
This is applicable only if Precision Optical Power monitoring
|
|
is enabled."
|
|
::= { f3EthernetAccPortPOPMStatsEntry 3 }
|
|
|
|
f3EthernetAccPortPOPMStatsOPRMaxVar OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Signed maximum variance of Optical Power Receive, from average.
|
|
This is applicable only if Precision Optical Power monitoring
|
|
is enabled."
|
|
::= { f3EthernetAccPortPOPMStatsEntry 4 }
|
|
|
|
f3EthernetAccPortPOPMStatsOPRGlitchRejects OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of glitch rejections. This is
|
|
applicable only if Precision Optical Layer monitoring is enabled."
|
|
::= { f3EthernetAccPortPOPMStatsEntry 5 }
|
|
|
|
f3EthernetAccPortPOPMStatsOPRRTR OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times the POPM state machine reverts to the running
|
|
state from the inhibited R state. This is applicable only if
|
|
Precision Optical Layer monitoring is enabled."
|
|
::= { f3EthernetAccPortPOPMStatsEntry 6 }
|
|
|
|
f3EthernetAccPortPOPMStatsOPROOR OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times the Precision Optical Power is out of range.
|
|
This is applicable only if Precision Optical Layer
|
|
monitoring is enabled."
|
|
::= { f3EthernetAccPortPOPMStatsEntry 7 }
|
|
|
|
f3EthernetAccPortPOPMStatsOPROOV OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times the Precision Optical Power out of variance
|
|
occurrences. This is applicable only if Precision Optical Layer
|
|
monitoring is enabled."
|
|
::= { f3EthernetAccPortPOPMStatsEntry 8 }
|
|
|
|
--
|
|
-- Ethernet Access Port POPM Current Statistics Table
|
|
--
|
|
f3EthernetAccPortPOPMHistoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF F3EthernetAccPortPOPMHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of Ethernet Access Port Precision Optical Power
|
|
related statistics.
|
|
These reflect the current data."
|
|
::= { f3POPMPerfObjects 2 }
|
|
|
|
f3EthernetAccPortPOPMHistoryEntry OBJECT-TYPE
|
|
SYNTAX F3EthernetAccPortPOPMHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row in the f3EthernetAccPortPOPMHistoryTable.
|
|
Entries exist in this table for each Ethernet interface/port."
|
|
AUGMENTS { cmEthernetAccPortHistoryEntry }
|
|
::= { f3EthernetAccPortPOPMHistoryTable 1 }
|
|
|
|
F3EthernetAccPortPOPMHistoryEntry ::= SEQUENCE {
|
|
f3EthernetAccPortPOPMHistoryOPR Integer32,
|
|
f3EthernetAccPortPOPMHistoryAOPR Integer32,
|
|
f3EthernetAccPortPOPMHistoryOPRVar Integer32,
|
|
f3EthernetAccPortPOPMHistoryOPRMaxVar Integer32,
|
|
f3EthernetAccPortPOPMHistoryOPRGlitchRejects Unsigned32,
|
|
f3EthernetAccPortPOPMHistoryOPRRTR Unsigned32,
|
|
f3EthernetAccPortPOPMHistoryOPROOR Unsigned32,
|
|
f3EthernetAccPortPOPMHistoryOPROOV Unsigned32
|
|
}
|
|
|
|
f3EthernetAccPortPOPMHistoryOPR OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Precision Optical Power Receive (in dBm) for the physical layer.
|
|
This is applicable only if Precision Optical Power monitoring
|
|
is enabled."
|
|
::= { f3EthernetAccPortPOPMHistoryEntry 1 }
|
|
|
|
f3EthernetAccPortPOPMHistoryAOPR OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average Precision Optical Power Receive (in dBm) for the physical
|
|
layer. This is applicable only if Precision Optical Power
|
|
monitoring is enabled."
|
|
::= { f3EthernetAccPortPOPMHistoryEntry 2 }
|
|
|
|
f3EthernetAccPortPOPMHistoryOPRVar OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Signed variance of Optical Power Receive, from average.
|
|
This is applicable only if Precision Optical Power monitoring
|
|
is enabled."
|
|
::= { f3EthernetAccPortPOPMHistoryEntry 3 }
|
|
|
|
f3EthernetAccPortPOPMHistoryOPRMaxVar OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Signed maximum variance of Optical Power Receive, from average.
|
|
This is applicable only if Precision Optical Power monitoring
|
|
is enabled."
|
|
::= { f3EthernetAccPortPOPMHistoryEntry 4 }
|
|
|
|
f3EthernetAccPortPOPMHistoryOPRGlitchRejects OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of glitch rejections. This is
|
|
applicable only if Precision Optical Layer monitoring is enabled."
|
|
::= { f3EthernetAccPortPOPMHistoryEntry 5 }
|
|
|
|
f3EthernetAccPortPOPMHistoryOPRRTR OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times the POPM state machine reverts to the running
|
|
state from the inhibited R state. This is applicable only if
|
|
Precision Optical Layer monitoring is enabled."
|
|
::= { f3EthernetAccPortPOPMHistoryEntry 6 }
|
|
|
|
f3EthernetAccPortPOPMHistoryOPROOR OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times the Precision Optical Power is out of range.
|
|
This is applicable only if Precision Optical Layer
|
|
monitoring is enabled."
|
|
::= { f3EthernetAccPortPOPMHistoryEntry 7 }
|
|
|
|
f3EthernetAccPortPOPMHistoryOPROOV OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times the Precision Optical Power out of variance
|
|
occurrences. This is applicable only if Precision Optical Layer
|
|
monitoring is enabled."
|
|
::= { f3EthernetAccPortPOPMHistoryEntry 8 }
|
|
|
|
|
|
--
|
|
-- Ethernet Network Port POPM Current Statistics Table
|
|
--
|
|
f3EthernetNetPortPOPMStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF F3EthernetNetPortPOPMStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of Ethernet Network Port Precision Optical Power
|
|
related statistics.
|
|
These reflect the current data."
|
|
::= { f3POPMPerfObjects 3 }
|
|
|
|
f3EthernetNetPortPOPMStatsEntry OBJECT-TYPE
|
|
SYNTAX F3EthernetNetPortPOPMStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row in the f3EthernetNetPortPOPMStatsTable.
|
|
Entries exist in this table for each Ethernet interface/port."
|
|
AUGMENTS { cmEthernetNetPortStatsEntry }
|
|
::= { f3EthernetNetPortPOPMStatsTable 1 }
|
|
|
|
F3EthernetNetPortPOPMStatsEntry ::= SEQUENCE {
|
|
f3EthernetNetPortPOPMStatsOPR Integer32,
|
|
f3EthernetNetPortPOPMStatsAOPR Integer32,
|
|
f3EthernetNetPortPOPMStatsOPRVar Integer32,
|
|
f3EthernetNetPortPOPMStatsOPRMaxVar Integer32,
|
|
f3EthernetNetPortPOPMStatsOPRGlitchRejects Unsigned32,
|
|
f3EthernetNetPortPOPMStatsOPRRTR Unsigned32,
|
|
f3EthernetNetPortPOPMStatsOPROOR Unsigned32,
|
|
f3EthernetNetPortPOPMStatsOPROOV Unsigned32
|
|
}
|
|
|
|
f3EthernetNetPortPOPMStatsOPR OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Precision Optical Power Receive (in dBm) for the physical layer.
|
|
This is applicable only if Precision Optical Power monitoring
|
|
is enabled."
|
|
::= { f3EthernetNetPortPOPMStatsEntry 1 }
|
|
|
|
f3EthernetNetPortPOPMStatsAOPR OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average Precision Optical Power Receive (in dBm) for the physical
|
|
layer. This is applicable only if Precision Optical Power
|
|
monitoring is enabled."
|
|
::= { f3EthernetNetPortPOPMStatsEntry 2 }
|
|
|
|
f3EthernetNetPortPOPMStatsOPRVar OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Signed variance of Optical Power Receive, from average.
|
|
This is applicable only if Precision Optical Power monitoring
|
|
is enabled."
|
|
::= { f3EthernetNetPortPOPMStatsEntry 3 }
|
|
|
|
f3EthernetNetPortPOPMStatsOPRMaxVar OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Signed maximum variance of Optical Power Receive, from average.
|
|
This is applicable only if Precision Optical Power monitoring
|
|
is enabled."
|
|
::= { f3EthernetNetPortPOPMStatsEntry 4 }
|
|
|
|
f3EthernetNetPortPOPMStatsOPRGlitchRejects OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of glitch rejections. This is
|
|
applicable only if Precision Optical Layer monitoring is enabled."
|
|
::= { f3EthernetNetPortPOPMStatsEntry 5 }
|
|
|
|
f3EthernetNetPortPOPMStatsOPRRTR OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times the POPM state machine reverts to the running
|
|
state from the inhibited R state. This is applicable only if
|
|
Precision Optical Layer monitoring is enabled."
|
|
::= { f3EthernetNetPortPOPMStatsEntry 6 }
|
|
|
|
f3EthernetNetPortPOPMStatsOPROOR OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times the Precision Optical Power is out of range.
|
|
This is applicable only if Precision Optical Layer
|
|
monitoring is enabled."
|
|
::= { f3EthernetNetPortPOPMStatsEntry 7 }
|
|
|
|
f3EthernetNetPortPOPMStatsOPROOV OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times the Precision Optical Power out of variance
|
|
occurrences. This is applicable only if Precision Optical Layer
|
|
monitoring is enabled."
|
|
::= { f3EthernetNetPortPOPMStatsEntry 8 }
|
|
|
|
--
|
|
-- Ethernet Network Port POPM Current History Table
|
|
--
|
|
f3EthernetNetPortPOPMHistoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF F3EthernetNetPortPOPMHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of Ethernet Network Port Precision Optical Power
|
|
related statistics.
|
|
These reflect the current data."
|
|
::= { f3POPMPerfObjects 4 }
|
|
|
|
f3EthernetNetPortPOPMHistoryEntry OBJECT-TYPE
|
|
SYNTAX F3EthernetNetPortPOPMHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row in the f3EthernetNetPortPOPMHistoryTable.
|
|
Entries exist in this table for each Ethernet interface/port."
|
|
AUGMENTS { cmEthernetNetPortHistoryEntry }
|
|
::= { f3EthernetNetPortPOPMHistoryTable 1 }
|
|
|
|
F3EthernetNetPortPOPMHistoryEntry ::= SEQUENCE {
|
|
f3EthernetNetPortPOPMHistoryOPR Integer32,
|
|
f3EthernetNetPortPOPMHistoryAOPR Integer32,
|
|
f3EthernetNetPortPOPMHistoryOPRVar Integer32,
|
|
f3EthernetNetPortPOPMHistoryOPRMaxVar Integer32,
|
|
f3EthernetNetPortPOPMHistoryOPRGlitchRejects Unsigned32,
|
|
f3EthernetNetPortPOPMHistoryOPRRTR Unsigned32,
|
|
f3EthernetNetPortPOPMHistoryOPROOR Unsigned32,
|
|
f3EthernetNetPortPOPMHistoryOPROOV Unsigned32
|
|
}
|
|
|
|
f3EthernetNetPortPOPMHistoryOPR OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Precision Optical Power Receive (in dBm) for the physical layer.
|
|
This is applicable only if Precision Optical Power monitoring
|
|
is enabled."
|
|
::= { f3EthernetNetPortPOPMHistoryEntry 1 }
|
|
|
|
f3EthernetNetPortPOPMHistoryAOPR OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average Precision Optical Power Receive (in dBm) for the physical
|
|
layer. This is applicable only if Precision Optical Power
|
|
monitoring is enabled."
|
|
::= { f3EthernetNetPortPOPMHistoryEntry 2 }
|
|
|
|
f3EthernetNetPortPOPMHistoryOPRVar OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Signed variance of Optical Power Receive, from average.
|
|
This is applicable only if Precision Optical Power monitoring
|
|
is enabled."
|
|
::= { f3EthernetNetPortPOPMHistoryEntry 3 }
|
|
|
|
f3EthernetNetPortPOPMHistoryOPRMaxVar OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Signed maximum variance of Optical Power Receive, from average.
|
|
This is applicable only if Precision Optical Power monitoring
|
|
is enabled."
|
|
::= { f3EthernetNetPortPOPMHistoryEntry 4 }
|
|
|
|
f3EthernetNetPortPOPMHistoryOPRGlitchRejects OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of glitch rejections. This is
|
|
applicable only if Precision Optical Layer monitoring is enabled."
|
|
::= { f3EthernetNetPortPOPMHistoryEntry 5 }
|
|
|
|
f3EthernetNetPortPOPMHistoryOPRRTR OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times the POPM state machine reverts to the running
|
|
state from the inhibited R state. This is applicable only if
|
|
Precision Optical Layer monitoring is enabled."
|
|
::= { f3EthernetNetPortPOPMHistoryEntry 6 }
|
|
|
|
f3EthernetNetPortPOPMHistoryOPROOR OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times the Precision Optical Power is out of range.
|
|
This is applicable only if Precision Optical Layer
|
|
monitoring is enabled."
|
|
::= { f3EthernetNetPortPOPMHistoryEntry 7 }
|
|
|
|
f3EthernetNetPortPOPMHistoryOPROOV OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times the Precision Optical Power out of variance
|
|
occurrences. This is applicable only if Precision Optical Layer
|
|
monitoring is enabled."
|
|
::= { f3EthernetNetPortPOPMHistoryEntry 8 }
|
|
|
|
--
|
|
-- Conformance
|
|
--
|
|
f3POPMCompliances OBJECT IDENTIFIER ::= {f3POPMConformance 1}
|
|
f3POPMGroups OBJECT IDENTIFIER ::= {f3POPMConformance 2}
|
|
|
|
f3POPMCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the requirements for conformance to the POPM Object
|
|
group."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
f3POPMFacilityGroup, f3POPMStatsGroup
|
|
}
|
|
::= { f3POPMCompliances 1 }
|
|
|
|
f3POPMFacilityGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
f3EthernetAccPortPOPMonitorEnabled,
|
|
f3EthernetAccPortPOPMonitorOperRangeHi,
|
|
f3EthernetAccPortPOPMonitorOperRangeLow,
|
|
f3EthernetAccPortPOPMonitorVariance,
|
|
f3EthernetAccPortPOPMonitorWindowSize,
|
|
f3EthernetAccPortPOPMonitorGlitchRejectionLevel,
|
|
f3EthernetAccPortPOPMonitorState,
|
|
f3EthernetAccPortPOPMonitorClearAction,
|
|
|
|
f3EthernetNetPortPOPMonitorEnabled,
|
|
f3EthernetNetPortPOPMonitorOperRangeHi,
|
|
f3EthernetNetPortPOPMonitorOperRangeLow,
|
|
f3EthernetNetPortPOPMonitorVariance,
|
|
f3EthernetNetPortPOPMonitorWindowSize,
|
|
f3EthernetNetPortPOPMonitorGlitchRejectionLevel,
|
|
f3EthernetNetPortPOPMonitorState,
|
|
f3EthernetNetPortPOPMonitorClearAction
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects used to manage the F3 POPM Functionality
|
|
."
|
|
::= { f3POPMGroups 1 }
|
|
|
|
f3POPMStatsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
f3EthernetAccPortPOPMStatsOPR, f3EthernetAccPortPOPMStatsAOPR,
|
|
f3EthernetAccPortPOPMStatsOPRVar, f3EthernetAccPortPOPMStatsOPRMaxVar,
|
|
f3EthernetAccPortPOPMStatsOPRGlitchRejects,
|
|
f3EthernetAccPortPOPMStatsOPRRTR,
|
|
f3EthernetAccPortPOPMStatsOPROOR, f3EthernetAccPortPOPMStatsOPROOV,
|
|
|
|
f3EthernetAccPortPOPMHistoryOPR, f3EthernetAccPortPOPMHistoryAOPR,
|
|
f3EthernetAccPortPOPMHistoryOPRVar, f3EthernetAccPortPOPMHistoryOPRMaxVar,
|
|
f3EthernetAccPortPOPMHistoryOPRGlitchRejects,
|
|
f3EthernetAccPortPOPMHistoryOPRRTR,
|
|
f3EthernetAccPortPOPMHistoryOPROOR, f3EthernetAccPortPOPMHistoryOPROOV,
|
|
|
|
f3EthernetNetPortPOPMStatsOPR, f3EthernetNetPortPOPMStatsAOPR,
|
|
f3EthernetNetPortPOPMStatsOPRVar, f3EthernetNetPortPOPMStatsOPRMaxVar,
|
|
f3EthernetNetPortPOPMStatsOPRGlitchRejects,
|
|
f3EthernetNetPortPOPMStatsOPRRTR,
|
|
f3EthernetNetPortPOPMStatsOPROOR, f3EthernetNetPortPOPMStatsOPROOV,
|
|
|
|
f3EthernetNetPortPOPMHistoryOPR, f3EthernetNetPortPOPMHistoryAOPR,
|
|
f3EthernetNetPortPOPMHistoryOPRVar, f3EthernetNetPortPOPMHistoryOPRMaxVar,
|
|
f3EthernetNetPortPOPMHistoryOPRGlitchRejects,
|
|
f3EthernetNetPortPOPMHistoryOPRRTR,
|
|
f3EthernetNetPortPOPMHistoryOPROOR, f3EthernetNetPortPOPMHistoryOPROOV
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects used to manage the F3 POPM Functionality
|
|
."
|
|
::= { f3POPMGroups 2 }
|
|
|
|
END
|