david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
main
mibs/MIBS/audiocodes/AC-MEDIA-MIB
David Leutgeb 98a672123c Initial commit
2023-12-05 12:25:34 +01:00

4868 lines
117 KiB
Plaintext
Raw Permalink Blame History

AC-MEDIA-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE,
MODULE-IDENTITY FROM SNMPv2-SMI
TAddress,
DisplayString,
DateAndTime, TEXTUAL-CONVENTION FROM SNMPv2-TC
IpAddress FROM RFC1155-SMI
Unsigned32,
Integer32,
enterprises FROM SNMPv2-SMI
RowStatus FROM SNMPv2-TC
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
audioCodes,
acRegistrations,
acGeneric,
acProducts,acBoardMibs FROM AUDIOCODES-TYPES-MIB;
acMedia MODULE-IDENTITY
LAST-UPDATED "201207260501Z" --Thursday, July 26 2012
ORGANIZATION "AudioCodes Ltd"
CONTACT-INFO
"Postal: Support
AudioCodes LTD
1 Hayarden Street
Airport City
Lod, ISRAEL 70151
Tel: 972-3-9764000
Fax: 972-3-9764040
Email: support@audiocodes.com
Web: www.audiocodes.com"
DESCRIPTION
""
::= {acBoardMibs 4}
acMediaConfiguration OBJECT IDENTIFIER ::= {acMedia 1}
acMediaDSPConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 1}
acMediaDSPConfigVersionTemplateNumber OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects the DSP load number. Each load has a different coder
list, a different channel capacity and different features supported.
Range = 0 to 255.
Access: Offline.
AC INI-Param: DSPVERSIONTEMPLATENUMBER"
::= {acMediaDSPConfig 1}
-- ****************************************
-- acMediaDsp table declaration
-- ****************************************
acMediaDspTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcMediaDspEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= {acMediaDSPConfig 21}
-- ****************************************
-- acMediaDsp table entry
-- ****************************************
acMediaDspEntry OBJECT-TYPE
SYNTAX AcMediaDspEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX {acMediaDspIndex}
::= {acMediaDspTable 1}
-- ****************************************
-- acMediaDsp TABLE
-- ****************************************
AcMediaDspEntry ::= SEQUENCE {
acMediaDspIndex Unsigned32,
acMediaDspRowStatus RowStatus,
acMediaDspTemplateNumber Unsigned32,
acMediaDspResourcesPercentage Unsigned32
}
acMediaDspIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry number in the table.
AC INI-Param: DspTemplates_Index"
::= {acMediaDspEntry 1}
acMediaDspRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"ROWSTATUS field for line. Internal parameter.
AC INI-Param: N/A"
::= {acMediaDspEntry 2}
acMediaDspTemplateNumber OBJECT-TYPE
SYNTAX Unsigned32 (0..16)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DSP template number.
Access: Offline.
AC INI-Param: DspTemplates_DspTemplateNumber"
::= {acMediaDspEntry 3}
acMediaDspResourcesPercentage OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Percentage use for the specified template.
Access: Offline.
AC INI-Param: DspTemplates_DspResourcesPercentage"
::= {acMediaDspEntry 4}
acMediaVoiceConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 2}
acVoice OBJECT IDENTIFIER ::= {acMediaVoiceConfig 1}
acVoicePayloadFormat OBJECT-TYPE
SYNTAX INTEGER {
voicePayloadFormatRTP(0)
,
voicePayloadFormatATM(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the voice payload format. Choose either 0 = RTP or 1 =
ATM (which enables working with vendors that use G.726 ATM Payload
Format over RTP. Uses the enum acTVoicePayloadFormat.
0 = VoicePayloadFormatRTP
1 = VoicePayloadFormatATM
2 = VoicePAyloadFormatIllegal.
Access: Online.
AC INI-Param: VOICEPAYLOADFORMAT"
::= {acVoice 1}
acVoiceVolume OBJECT-TYPE
SYNTAX Integer32 (-32..31)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the voice output gain control.
Range: -32 dB to +31 dB in 1 dB steps
-32 = mute
Default = 0 = No Gain.
Access: Online.
AC INI-Param: VOICEVOLUME"
::= {acVoice 2}
acVoiceInputGain OBJECT-TYPE
SYNTAX Integer32 (-32..31)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the PCM input gain.
Range = -32 dB to +31 dB in 1 dB steps.
Default = No Gain.
Access: Online.
AC INI-Param: INPUTGAIN"
::= {acVoice 3}
acVoiceTestMode OBJECT-TYPE
SYNTAX INTEGER {
coderLoopback(0)
,
pCMLoopback(1)
,
toneInjection(2)
,
noLoopback(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the type of testing mode applied:
0 = Coder Loopback performs an encoder/decoder loopback inside
the DSP device
1 = PCM Loopback loops back an incoming PCM to the outgoing
PCM.
2 = ToneInjection generates a 1000 Hz tone to the outgoing
PCM
3 = NoLoopback sets the channel to work in normal mode.
Access: Online.
AC INI-Param: TESTMODE"
::= {acVoice 4}
acVoiceTTYTransportType OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
inband-Relay(2)
,
bypass (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the transferring method of TTY signals during a call
0 = Disable
1= Bypass
2 = Relay
.
Access: Online.
AC INI-Param: TTYTRANSPORTTYPE"
::= {acVoice 5}
acVoiceEnableMediaSecurity OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables Media Security protocol (SRTP) . Enabling
this parameter might reduce the board channel capacity.
0 = Disable
1 = Enable.
Access: Offline.
AC INI-Param: ENABLEMEDIASECURITY"
::= {acVoice 6}
acVoiceAriaProtocolSupport OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables Aria encryption protocol. Enabling this
parameter might reduce the board channel capacity.
0 = Disable
1 = Enable
Supported on TP6310, TP8410 and M800.
Access: Offline.
AC INI-Param: AriaProtocolSupport"
::= {acVoice 7}
acVoiceCoderRate OBJECT IDENTIFIER ::= {acVoice 20}
acVoiceCoderRateEVRC OBJECT-TYPE
SYNTAX INTEGER {
variableRate(0)
,
ac1kbps(1)
,
ac4kbps(2)
,
ac8kbps(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter is used to configure the EVRC coder bit rate.
0 = Variable Rate
1 = 1 kbps
2 = 4 kbps
3 = 8 kbps.
Access: Online.
AC INI-Param: EVRCRate"
::= {acVoiceCoderRate 1}
acVoiceCoderRateQCELP8 OBJECT-TYPE
SYNTAX INTEGER {
variableRate(0)
,
ac1kbps(1)
,
ac2kbps(2)
,
ac4kbps(3)
,
ac8kbps(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter is used to configure the QCELP8 coder bit rate.
0 = Variable Rate
1 = 1 kbps
2 = 2 kbps
3 = 4 kbps
4 = 8 kbps.
Access: Online.
AC INI-Param: QCELP8Rate"
::= {acVoiceCoderRate 2}
acVoiceCoderRateQCELP13 OBJECT-TYPE
SYNTAX INTEGER {
variableRate(0)
,
ac1kbps(1)
,
ac3kbps(2)
,
ac7kbps(3)
,
ac13kbps(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter is used to configure the QCELP13 coder bit rate.
0 = Variable Rate
1 = 1 kbps
2 = 3 kbps
3 = 7 kbps
4 = 13 kbps
.
Access: Online.
AC INI-Param: QCELP13Rate"
::= {acVoiceCoderRate 3}
acVoiceCoderRateG729EVMaxBitRate OBJECT-TYPE
SYNTAX INTEGER {
g729EV-RATE-8-KBPS (0)
,
g729EV-RATE-12-KBPS (1)
,
g729EV-RATE-14-KBPS (2)
,
g729EV-RATE-16-KBPS (3)
,
g729EV-RATE-18-KBPS (4)
,
g729EV-RATE-20-KBPS (5)
,
g729EV-RATE-22-KBPS (6)
,
g729EV-RATE-24-KBPS (7)
,
g729EV-RATE-26-KBPS (8)
,
g729EV-RATE-28-KBPS (9)
,
g729EV-RATE-30-KBPS (10)
,
g729EV-RATE-32-KBPS (11)
,
g729EV-RATE-UNDEFINED (15)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the maximum generation bitrate for all participants
in a session using G729EV coder. This parameter is defined
per session and is equal for all the parties. The initial
generation bit rate is the minimum between the MaxBitRate and
the MBS values.
Possible values are:
0 = G729EV_RATE_8_KBPS
1 = G729EV_RATE_12_KBPS
2 = G729EV_RATE_14_KBPS
3 = G729EV_RATE_16_KBPS
4 = G729EV_RATE_18_KBPS
5 = G729EV_RATE_20_KBPS
6 = G729EV_RATE_22_KBPS
7 = G729EV_RATE_24_KBPS
8 = G729EV_RATE_26_KBPS
9 = G729EV_RATE_28_KBPS
10 = G729EV_RATE_30_KBPS
11 = G729EV_RATE_32_KBPS
15 = G729EV_RATE_UNDEFINED.
Access: Online.
AC INI-Param: G729EVMaxBitRate"
::= {acVoiceCoderRate 4}
acVoiceCoderRateG729EVLocalMBS OBJECT-TYPE
SYNTAX INTEGER {
g729EV-RATE-8-KBPS (0)
,
g729EV-RATE-12-KBPS (1)
,
g729EV-RATE-14-KBPS (2)
,
g729EV-RATE-16-KBPS (3)
,
g729EV-RATE-18-KBPS (4)
,
g729EV-RATE-20-KBPS (5)
,
g729EV-RATE-22-KBPS (6)
,
g729EV-RATE-24-KBPS (7)
,
g729EV-RATE-26-KBPS (8)
,
g729EV-RATE-28-KBPS (9)
,
g729EV-RATE-30-KBPS (10)
,
g729EV-RATE-32-KBPS (11)
,
g729EV-RATE-UNDEFINED (15)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the maximal bitrate, which may be used by the G729EV
coder at a specific channel. This parameter is defined
per channel and may vary between the parties. The initial generation
bit rate is the minimum between the MaxBitRate and
the MBS values.
Possible values are:
0 = G729EV_RATE_8_KBPS
1 = G729EV_RATE_12_KBPS
2 = G729EV_RATE_14_KBPS
3 = G729EV_RATE_16_KBPS
4 = G729EV_RATE_18_KBPS
5 = G729EV_RATE_20_KBPS
6 = G729EV_RATE_22_KBPS
7 = G729EV_RATE_24_KBPS
8 = G729EV_RATE_26_KBPS
9 = G729EV_RATE_28_KBPS
10 = G729EV_RATE_30_KBPS
11 = G729EV_RATE_32_KBPS
15 = G729EV_RATE_UNDEFINED.
Access: Online.
AC INI-Param: G729EVLocalMBS"
::= {acVoiceCoderRate 5}
acVoiceCoderRateG729EVReceiveMBS OBJECT-TYPE
SYNTAX INTEGER {
g729EV-RATE-8-KBPS (0)
,
g729EV-RATE-12-KBPS (1)
,
g729EV-RATE-14-KBPS (2)
,
g729EV-RATE-16-KBPS (3)
,
g729EV-RATE-18-KBPS (4)
,
g729EV-RATE-20-KBPS (5)
,
g729EV-RATE-22-KBPS (6)
,
g729EV-RATE-24-KBPS (7)
,
g729EV-RATE-26-KBPS (8)
,
g729EV-RATE-28-KBPS (9)
,
g729EV-RATE-30-KBPS (10)
,
g729EV-RATE-32-KBPS (11)
,
g729EV-RATE-UNDEFINED (15)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the value of the MBS field of the G729EV frames to
be sent to the other party. This parameter reflects the maximum
bit rate, which the local G729EV supports as a receiver.
Possible values are:
0 = G729EV_RATE_8_KBPS
1 = G729EV_RATE_12_KBPS
2 = G729EV_RATE_14_KBPS
3 = G729EV_RATE_16_KBPS
4 = G729EV_RATE_18_KBPS
5 = G729EV_RATE_20_KBPS
6 = G729EV_RATE_22_KBPS
7 = G729EV_RATE_24_KBPS
8 = G729EV_RATE_26_KBPS
9 = G729EV_RATE_28_KBPS
10 = G729EV_RATE_30_KBPS
11 = G729EV_RATE_32_KBPS
15 = G729EV_RATE_UNDEFINED.
Access: Online.
AC INI-Param: G729EVReceiveMBS"
::= {acVoiceCoderRate 6}
acVoiceCoderRateMsRtaForwardErrorCorrectionEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the Microsoft RTA coder forward error correction
mode.
0 - Disable.
1 - Enable.
Access: Online.
AC INI-Param: MSRTAForwardErrorCorrectionEnable"
::= {acVoiceCoderRate 7}
acVoiceCoderRateMsRtaTxBitRate OBJECT-TYPE
SYNTAX Unsigned32 (0..29000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the Microsoft RTA coder TX bit rate.
0 - Automatic.
Any value between 8,800 - 29,000.
Access: Online.
AC INI-Param: MSRTATxBitRate"
::= {acVoiceCoderRate 8}
acVoiceCoderRateSilkTxInbandFEC OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the SILK encoder forward error correction mode.
Access: Online.
AC INI-Param: SilkTxInbandFEC"
::= {acVoiceCoderRate 9}
acVoiceCoderRateSilkMaxAverageBitRate OBJECT-TYPE
SYNTAX Unsigned32 (5000..30000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the SILK encoder maximal average bit rate. Narrow
band range is 5000-16000 .Wide band range is 8000-30000.
Access: Online.
AC INI-Param: SilkMaxAverageBitRate"
::= {acVoiceCoderRate 10}
acVoiceCoderRateSpeexNBBitRate OBJECT-TYPE
SYNTAX INTEGER {
cE-SPEEX-NB-RATE-2-15-KBPS(1)
,
cE-SPEEX-NB-RATE-5-95-KBPS(2)
,
cE-SPEEX-NB-RATE-8-00-KBPS(3)
,
cE-SPEEX-NB-RATE-11-0-KBPS(4)
,
cE-SPEEX-NB-RATE-15-0-KBPS(5)
,
cE-SPEEX-NB-RATE-18-2-KBPS(6)
,
cE-SPEEX-NB-RATE-24-6-KBPS(7)
,
cE-SPEEX-NB-RATE-3-95-KBPS(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the bitrate of Speex NB coder.
Access: Instant.
AC INI-Param: SpeexNBBitRate"
::= {acVoiceCoderRate 11}
acVoiceCoderRateSpeexWBBitRate OBJECT-TYPE
SYNTAX INTEGER {
cE-SPEEX-WB-RATE-3-95-KBPS(0)
,
cE-SPEEX-WB-RATE-5-75-KBPS(1)
,
cE-SPEEX-WB-RATE-7-75-KBPS(2)
,
cE-SPEEX-WB-RATE-9-80-KBPS(3)
,
cE-SPEEX-WB-RATE-12-8-KBPS(4)
,
cE-SPEEX-WB-RATE-16-8-KBPS(5)
,
cE-SPEEX-WB-RATE-20-6-KBPS(6)
,
cE-SPEEX-WB-RATE-23-8-KBPS(7)
,
cE-SPEEX-WB-RATE-27-8-KBPS(8)
,
cE-SPEEX-WB-RATE-34-2-KBPS(9)
,
cE-SPEEX-WB-RATE-42-2-KBPS(10)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the bitrate of Speex WB coder.
Access: Instant.
AC INI-Param: SpeexWBBitRate"
::= {acVoiceCoderRate 12}
acVoiceAGC OBJECT IDENTIFIER ::= {acMediaVoiceConfig 2}
acVoiceAGCEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Activates the AGC (Automatic Gain Control).
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: ENABLEAGC"
::= {acVoiceAGC 1}
acVoiceAGCGainSlope OBJECT-TYPE
SYNTAX Unsigned32 (0..31)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the AGC (Automatic Gain Control) convergence rate.
Range = 0 to 31 (according to acTAGCGainSlope)
Default = 3 (= 1 db/sec).
Access: Online.
AC INI-Param: AGCGAINSLOPE"
::= {acVoiceAGC 2}
acVoiceAGCRedirection OBJECT-TYPE
SYNTAX Unsigned32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the AGC (Automatic Gain Control) direction.
0 = AGC works on signals from the TDM side
1 = AGC works on signals coming from the Network side.
Access: Online.
AC INI-Param: AGCREDIRECTION"
::= {acVoiceAGC 3}
acVoiceAGCTargetEnergy OBJECT-TYPE
SYNTAX Unsigned32 (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the signal energy value [-dBm] that the AGC (Automatic
Gain Control) attempts to attain.
Range = 0 to 63.
Access: Online.
AC INI-Param: AGCTARGETENERGY"
::= {acVoiceAGC 4}
acVoiceAGCMinGain OBJECT-TYPE
SYNTAX Unsigned32 (0..31)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the minimum gain by the AGC when activated [- db].
Range = 0 to -31.
Access: Offline.
AC INI-Param: AGCMINGAIN"
::= {acVoiceAGC 5}
acVoiceAGCMaxGain OBJECT-TYPE
SYNTAX Unsigned32 (0..18)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the maximum gain by the AGC when activated [db].
Range = 0 to 18.
Access: Offline.
AC INI-Param: AGCMAXGAIN"
::= {acVoiceAGC 6}
acVoiceAGCDisableFastAdaptation OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Disables the AGC Fast Adaptation mode.
Enable = 1
Disable = 0.
Access: Offline.
AC INI-Param: AGCDISABLEFASTADAPTATION"
::= {acVoiceAGC 7}
acVoiceEC OBJECT IDENTIFIER ::= {acMediaVoiceConfig 3}
acVoiceECEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables the Echo Canceller.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: ENABLEECHOCANCELLER"
::= {acVoiceEC 1}
acVoiceECMaxLength OBJECT-TYPE
SYNTAX INTEGER {
eCLengthDefault(0)
,
eCLength15MSec(1)
,
eCLength20MSec(2)
,
eCLength25MSec(3)
,
eCLength32MSec(4)
,
eCLength35MSec(5)
,
eCLength40MSec(6)
,
eCLength45MSec(7)
,
eCLength50MSec(8)
,
eCLength55MSec(9)
,
eCLength60MSec(10)
,
eCLength64MSec(11)
,
eCLength128MSec(22)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the maximum board EC (Echo Canceler) length capability.
0 = EC length determined internally to reach maximum channel
capacity.
4 = 32 msec
11 = 64 msec
22 = 128 msec
TP-1610 only:
Using 64 or 128 msec reduces the channel capacity to 200 channels.
.
Access: Offline.
AC INI-Param: MAXECHOCANCELLERLENGTH"
::= {acVoiceEC 2}
acVoiceECHybridLoss OBJECT-TYPE
SYNTAX INTEGER {
eCHybridLoss6DBM(0)
,
eCHybridLoss0DBM(2)
,
eCHybridLoss3DBM(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the worst case ratio between the signal level transmitted
to the hybrid and the echo level returning from hybrid. Set
this per worst hybrid in the system in terms of echo return
loss. Refer to the enumeration acTECHybridLoss.
0 = 6 dBm
2 = 0 dBm
3 = 3 dBm.
Access: Online.
AC INI-Param: ECHYBRIDLOSS"
::= {acVoiceEC 3}
acVoiceECToneDetector OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to configure the Echo Canceler Tone Detector. Detects a
2100 Hz tone at the input signal to the TDM (received signal).
Improves Echo Canceler operation accordingly. Detects 2100,
2100 with phase reversals and 2100 with AM. Improves the
operation of the Echo Canceler by slowing adaptation when the
signal is detected. This data is also used by the fax state
machine.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: ECEnableToneDetector"
::= {acVoiceEC 4}
acVoiceECComfortNoiseGeneration OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Use this parameter to enable or enable Echo Canceler Comfort
Noise Generation, which generates comfort noise when the Non
Linear Processor (NLP) is active.
When the NLP ascertains that the signal is echo and not doubletalk
and decides to clip, instead of transmitting silence
it transmits a synthesized signal similar to the background
noise.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: ECEnableComfortNoiseGeneration"
::= {acVoiceEC 5}
acVoiceSC OBJECT IDENTIFIER ::= {acMediaVoiceConfig 4}
acVoiceSCMode OBJECT-TYPE
SYNTAX INTEGER {
sILENCE-COMPRESION-DISABLE(0)
,
sILENCE-COMPRESION-ENABLE(1)
,
sILENCE-COMPRESION-ENABLE-NOISE-ADAPTATION-DISABLE(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables Silence Suppression Mode.
0 = Disable = SILENCE_COMPRESION_DISABLE
1 = Enable = SILENCE_COMPRESION_ENABLE
2 = Enable without adaptation = SILENCE_COMPRESION_ENABLE_NOISE_ADAPTATION_DISABLE.
Access: Online.
AC INI-Param: ENABLESILENCECOMPRESSION"
::= {acVoiceSC 1}
acVoiceSCVBRCoderDTXMin OBJECT-TYPE
SYNTAX Unsigned32 (0..20000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the minimum number of frames gap between two SID frames,
when using the EVRC voice activity detector.
.
Access: Online.
AC INI-Param: EVRCDTXMin"
::= {acVoiceSC 2}
acVoiceSCVBRCoderDTXMax OBJECT-TYPE
SYNTAX Unsigned32 (0..20000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the maximum number of frames gap between two SID frames,
when using the EVRC voice activity detector.
Access: Online.
AC INI-Param: EVRCDTXMax"
::= {acVoiceSC 3}
acVoiceSCVBRCoderHangover OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For indicating the desired number of silence frames at the beginning
of each silence period, when using the VBR CODER silence
suppression.
.
Access: Online.
AC INI-Param: VBRCoderHangover"
::= {acVoiceSC 4}
acMediaFaxModemConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 3}
acFaxModem OBJECT IDENTIFIER ::= {acMediaFaxModemConfig 1}
acFMCommon OBJECT IDENTIFIER ::= {acFaxModem 1}
acFMCommonRelayVolume OBJECT-TYPE
SYNTAX Integer32 (-18..-3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the fax gain control.
The range -18 to -3 relates to -18.5 dBm to -3.5 dBm in steps
of 1 dBm.
Access: Online.
AC INI-Param: FAXMODEMRELAYVOLUME"
::= {acFMCommon 1}
acFMCommonV34Transport OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
relayEnable(1)
,
byPassEnable(2)
,
eventsOnly(3)
,
ansMute(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the V.34 modem transport method.
0 = Transparent
2 = Bypass
3 = Transparent with Events
4 = AnsMute.
Access: Online.
AC INI-Param: V34MODEMTRANSPORTTYPE"
::= {acFMCommon 2}
acFMCommonEnableInbandNetworkDetection OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables inband network detection related to fax/modem.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: EnableFaxModemInbandNetworkDetection"
::= {acFMCommon 3}
acFMCommonCEDTransferMode OBJECT-TYPE
SYNTAX INTEGER {
usingFaxRelayOrVBD(0)
,
voiceModeOrVBD(1)
,
rFC4733BlockingRTPVBD(2)
,
rFC4733AlongWithRTPVBD(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0 - transfer CED using T38.
1 - transfer CED over VBD(some Vxx=2) or VoIP(Vxx=0).
2 - transfer CED using RFC, and block CED over VBD/VoIP.
3 - transfer CED using RFC in parallel with CED over VBD/VoIP.
Access: Instant.
AC INI-Param: CEDTransferMode"
::= {acFMCommon 4}
acFMBypass OBJECT IDENTIFIER ::= {acFaxModem 2}
acFMBypassCoderType OBJECT-TYPE
SYNTAX INTEGER {
g711Alaw-64(0)
,
g711Mulaw(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Users can use this parameter to set the fax/modem bypass coder
(according to acTCoders).
0 = G.711 A-Law
1 = G.711 Mu-Law.
Access: Online.
AC INI-Param: FAXMODEMBYPASSCODERTYPE"
::= {acFMBypass 1}
acFMBypassPacketizationPeriod OBJECT-TYPE
SYNTAX Unsigned32 (1..12)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the number of basic frames to generate one RTP fax/modem
bypass packet.
Access: Online.
AC INI-Param: FAXMODEMBYPASSM"
::= {acFMBypass 2}
acFMBypassBasicPacketInterval OBJECT-TYPE
SYNTAX INTEGER {
pACKET-INTERVAL-DEFAULT(0)
,
pACKET-INTERVAL-5-MSEC(1)
,
pACKET-INTERVAL-10-MSEC(2)
,
pACKET-INTERVAL-20-MSEC(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the basic Fax / Modem Bypass RTP packet rate.
0 = Default (set internally) (PACKET_INTERVAL_DEFAULT)
1 = 5 msec (PACKET_INTERVAL_5_MSEC)
2 = 10 msec (PACKET_INTERVAL_10_MSEC)
3 = 20 msec (PACKET_INTERVAL_20_MSEC).
Access: Online.
AC INI-Param: FAXMODEMBYPASSBASICRTPPACKETINTERVAL"
::= {acFMBypass 3}
acFMBypassDJBufMinDelay OBJECT-TYPE
SYNTAX Unsigned32 (0..150)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the Jitter Buffer constant delay (in milliseconds)
during a Fax & Modem Bypass session. (The minimum Jitter Buffer
Size).
Range = 0 to 150.
Access: Online.
AC INI-Param: FAXMODEMBYPASDJBUFMINDELAY"
::= {acFMBypass 4}
acFMBypassFaxBypassOutputGain OBJECT-TYPE
SYNTAX Integer32 (-31..31)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the fax bypass output gain control.
Range: -31 dB to +31 dB in 1 dB steps
Default = 0 = No Gain.
Access: Online.
AC INI-Param: FaxBypassOutputGain"
::= {acFMBypass 5}
acFMBypassModemBypassOutputGain OBJECT-TYPE
SYNTAX Integer32 (-31..31)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the modem bypass output gain control.
Range: -31 dB to +31 dB in 1 dB steps
Default = 0 = No Gain.
Access: Online.
AC INI-Param: ModemBypassOutputGain"
::= {acFMBypass 6}
acFMNSE OBJECT IDENTIFIER ::= {acFaxModem 3}
acFMNSEPayloadType OBJECT-TYPE
SYNTAX Unsigned32 (96..127)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Users can use this parameter to modify the NSE packet's payload
type.
Range = 96 to 127.
Access: Online.
AC INI-Param: NSEPAYLOADTYPE"
::= {acFMNSE 1}
acFMNSEMode OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables Cisco's NSE fax / modem automatic pass-through
mode.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: NSEMODE"
::= {acFMNSE 2}
acFax OBJECT IDENTIFIER ::= {acMediaFaxModemConfig 2}
acFaxTransportMode OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
relayEnable(1)
,
byPassEnable(2)
,
eventsOnly(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the Fax over IP transport method.
0 = Transparent
1 = Relay
2 = Bypass
3 = Transparent with Events.
Access: Online.
AC INI-Param: FAXTRANSPORTMODE"
::= {acFax 1}
acFaxBypassPayloadType OBJECT-TYPE
SYNTAX Unsigned32 (0..127)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Users can use this parameter to modify the Fax Bypass Mode RTP
packet's payload type.
In the case of congestion (if the selected payload type is
already used for other coders/modes), then a TP_SETUP_PARAMETER_INVALID_ERROR
is issued and the payload type is set to the
default value (102).
It is the user's responsibility to avoid congestion with other
payload types.
Range = 0 to 127.
Access: Online.
AC INI-Param: FAXBYPASSPAYLOADTYPE"
::= {acFax 2}
acFaxRelayECMEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables the using of ECM mode during Fax Relay.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: FAXRELAYECMENABLE"
::= {acFax 3}
acFaxRelayMaxRate OBJECT-TYPE
SYNTAX INTEGER {
acRate2400bps(0)
,
acRate4800bps(1)
,
acRate7200bps(2)
,
acRate9600bps(3)
,
acRate12000bps(4)
,
acRate14400bps(5)
,
acRate16800bps(6)
,
acRate19200b(7)
,
acRate21600bps(8)
,
acRate24000bps(9)
,
acRate26400bps(10)
,
acRate28800bps(11)
,
acRate31200bps(12)
,
acRate33600bps(13)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Limits the maximum rate at which fax messages are transmitted.
0 = 2400 bps
1 = 4800 bps
2 = 7200 bps
3 = 9600 bps
4 = 12000 bps
5 = 14400 bps
6 = 16800 bps
7 = 19200 bps
8 = 21600 bps
9 = 24000 bps
10 = 26400 bps
11 = 28800 bps
12 = 31200 bps
13 = 33600 bps.
Access: Online.
AC INI-Param: FAXRELAYMAXRATE"
::= {acFax 4}
acFaxRelayRedundancyDepth OBJECT-TYPE
SYNTAX Unsigned32 (0..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the depth of redundancy for fax packets. This parameter
is applicable only to non-V.21 packets.
0 = No redundancy
1 = 1 packet redundancy
2 = 2 packet redundancy.
Access: Online.
AC INI-Param: FAXRELAYREDUNDANCYDEPTH"
::= {acFax 5}
acFaxEnhancedRelayRedundancyDepth OBJECT-TYPE
SYNTAX Unsigned32 (0..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the number of repetitions to be applied to control
packets when using the T.38 standard.
0 = No redundancy
1 = 1 packet redundancy
2 = 2 packet redundancy
3 = 3 packet redundancy
4 = Maximum redundancy.
Access: Online.
AC INI-Param: FAXRELAYENHANCEDREDUNDANCYDEPTH"
::= {acFax 6}
acFaxCNGDetectorMode OBJECT-TYPE
SYNTAX INTEGER {
cNG-DETECTOR-MODE-DISABLE(0)
,
cNG-DETECTOR-MODE-RELAY(1)
,
cNG-DETECTOR-MODE-EVENT-ONLY(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the CNG Detector mode.
0 = Disable
1 = Relay
2 = Event Only.
Access: Online.
AC INI-Param: CNGDETECTORMODE"
::= {acFax 7}
acFaxV34TransportMethod OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
relayEnable(1)
,
byPassEnable(2)
,
eventsOnly(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the V.34 fax transport method.
One of the following values:
0 = Transparent
1 = Relay
2 = Bypass
3 = Transparent with Events.
Access: Online.
AC INI-Param: V34FAXTRANSPORTTYPE"
::= {acFax 8}
acFaxT38Version OBJECT-TYPE
SYNTAX INTEGER {
t38Version0(0)
,
t38Version3(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"T38 fax relay version.
0 = T.38 version 0 (from 06/1998)
3 = T.38 version 3 (V.34 over T.38 support)
Default = 3.
Access: Online.
AC INI-Param: T38Version"
::= {acFax 9}
acModem OBJECT IDENTIFIER ::= {acMediaFaxModemConfig 3}
acModemV22Transport OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
relayEnable(1)
,
byPassEnable(2)
,
eventsOnly(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the V.22 modem transport method.
0 = Transparent
2 = Bypass
3 = Transparent with Events.
Access: Online.
AC INI-Param: V22MODEMTRANSPORTTYPE"
::= {acModem 1}
acModemV23Transport OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
relayEnable(1)
,
byPassEnable(2)
,
eventsOnly(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the V.23 modem transport method.
0 = Transparent
2 = Bypass
3 = Transparent with Events.
Access: Online.
AC INI-Param: V23MODEMTRANSPORTTYPE"
::= {acModem 2}
acModemV32Transport OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
relayEnable(1)
,
byPassEnable(2)
,
eventsOnly(3)
,
ansMute(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the V.32 modem transport method.
0 = Transparent
2 = Bypass
3 = Transparent with Events
4 = AnsMute.
Access: Online.
AC INI-Param: V32MODEMTRANSPORTTYPE"
::= {acModem 3}
acModemBypassPayloadType OBJECT-TYPE
SYNTAX Unsigned32 (0..127)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Users can use this parameter to modify the Modem Bypass Mode
RTP packet's payload type.
In the case of congestion (if the selected payload type is
already used for other coders/modes), then a TP_SETUP_PARAMETER_INVALID_ERROR
is issued and the payload type is set to the
default value (103).
It is the user's responsibility to avoid congestion with other
payload types.
Range = 0 to 127.
Access: Online.
AC INI-Param: MODEMBYPASSPAYLOADTYPE"
::= {acModem 4}
acModemBellTransportType OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
byPassEnable(2)
,
eventsOnly(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Use this parameter to set the Bell modem transport method.
0 = Transparent
2 = Bypass (enum ByPassEnable)
3 = Transparent with Events (enum EventsOnly).
Access: Online.
AC INI-Param: BellModemTransportType"
::= {acModem 5}
acModemV21Transport OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
relayEnable(1)
,
byPassEnable(2)
,
eventsOnly(3)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Sets the V.21 modem transport method (must be set to 0 = Disable).
0 = Transparent
2 = Bypass
3 = Transparent with Events.
Access: Online.
AC INI-Param: V21ModemTransportType"
::= {acModem 6}
acModemEnableV150ModemRelaySupport OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Determines whether to enable V.150.1 modem relay support.
Range:
0 - Disable
1 - Enable.
Access: Offline.
AC INI-Param: EnableV150ModemRelaySupport"
::= {acModem 7}
acV150dot1 OBJECT IDENTIFIER ::= {acMediaFaxModemConfig 4}
acV150dot1AllocationProfile OBJECT-TYPE
SYNTAX Unsigned32 (0..20)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects the V.150.1 profile, determining how many DSP channels
have V.150.1 support.
Range = 0 to 3.
Access: Offline.
AC INI-Param: V1501AllocationProfile"
::= {acV150dot1 1}
acV150dot1SSEPayloadTypeRx OBJECT-TYPE
SYNTAX Unsigned32 (96..127)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSE payload type RX.
Access: Online.
AC INI-Param: V1501SSEPayloadTypeRx"
::= {acV150dot1 2}
acV150dot1SSEPayloadTypeTx OBJECT-TYPE
SYNTAX Unsigned32 (96..127)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSE payload type TX.
Access: Online.
AC INI-Param: V1501SSEPayloadTypeTx"
::= {acV150dot1 3}
acV150dot1SSERedundancyDepth OBJECT-TYPE
SYNTAX Unsigned32 (1..6)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSE is a part of V150.1 modem relay protocol and SSE messages
are sent over RTP.
SSE redundancy refers to the sending of SSE messages several
times to increase reliability. This parameter determines the
number of times each SSE message is to be resent.
Access: Online.
AC INI-Param: V1501SSERedundancyDepth"
::= {acV150dot1 4}
acV150dot1SPRTPayloadTypeRx OBJECT-TYPE
SYNTAX Unsigned32 (96..127)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SPRT payload type RX.
Access: Online.
AC INI-Param: V1501SPRTPayloadTypeRx"
::= {acV150dot1 5}
acV150dot1SPRTPayloadTypeTx OBJECT-TYPE
SYNTAX Unsigned32 (96..127)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SPRT payload type TX.
Access: Online.
AC INI-Param: V1501SPRTPayloadTypeTx"
::= {acV150dot1 6}
acV150dot1SPRTTransportChannel0MaxPayloadSize OBJECT-TYPE
SYNTAX Unsigned32 (140..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SPRT transport channel 0 max payload size.
Access: Online.
AC INI-Param: V1501SPRTTransportChannel0MaxPayloadSize"
::= {acV150dot1 7}
acV150dot1SPRTTransportChannel2MaxPayloadSize OBJECT-TYPE
SYNTAX Unsigned32 (132..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SPRT transport channel 2 max payload size.
Access: Online.
AC INI-Param: V1501SPRTTransportChannel2MaxPayloadSize"
::= {acV150dot1 8}
acV150dot1SPRTTransportChannel2MaxWindowSize OBJECT-TYPE
SYNTAX Unsigned32 (8..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SPRT transport channel 2 max window size.
Access: Online.
AC INI-Param: V1501SPRTTransportChannel2MaxWindowSize"
::= {acV150dot1 9}
acV150dot1SPRTTransportChannel3MaxPayloadSize OBJECT-TYPE
SYNTAX Unsigned32 (140..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SPRT transport channel 3 max payload size.
Access: Online.
AC INI-Param: V1501SPRTTransportChannel3MaxPayloadSize"
::= {acV150dot1 10}
acMediaRtpRtcpConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 4}
acRtpRtcp OBJECT IDENTIFIER ::= {acMediaRtpRtcpConfig 1}
acRtpRtcpBrokenConnectionEventTimeout OBJECT-TYPE
SYNTAX Unsigned32 (3..2684354)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines for how long the RTP connection should be broken
before the Broken Connection event is issued. In units of 100
msec.
.
Access: Online.
AC INI-Param: BROKENCONNECTIONEVENTTIMEOUT"
::= {acRtpRtcp 1}
acRtpRtcpBrokenConnectionEventActivationMode OBJECT-TYPE
SYNTAX INTEGER {
afterFirstIncomingRTPPacket(0)
,
onRTPStreamActivation(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines if the broken connection mechanism is activated when
the RTP stream is activated or when the first RTP packet
is received.
0 = After First incoming packet (default)
1 = Upon channel<65>s RTP activation.
.
Access: Online.
AC INI-Param: BROKENCONNECTIONEVENTACTIVATIONMODE"
::= {acRtpRtcp 2}
acRtpRtcpBasicRTPPacketInterval OBJECT-TYPE
SYNTAX INTEGER {
pACKET-INTERVAL-DEFAULT(0)
,
pACKET-INTERVAL-5-MSEC(1)
,
pACKET-INTERVAL-10-MSEC(2)
,
pACKET-INTERVAL-20-MSEC(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects the RTP packet rate for sample based coders (such as
G.711, G.726, G.727). Also applicable for G.729, G.729E & G.728.
0 = Default (set internally)
1 = 5 msec
2 = 10 msec
3 = 20 msec.
Access: Online.
AC INI-Param: BASICRTPPACKETINTERVAL"
::= {acRtpRtcp 3}
acRtpRtcpConnectionEstablishNotificationMode OBJECT-TYPE
SYNTAX INTEGER {
afterBrokenConnection(0)
,
uponFirstRTPFrameDetection(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the notification mode for the RTP connection establishment
event acEV_CONNECTION_ESTABLISHED.
0 = Notify only after a broken connection event
1 = Also notify when the first RTP packet is received.
Access: Online.
AC INI-Param: CONNECTIONESTABLISHEMENTNOTIFICATIONMODE"
::= {acRtpRtcp 4}
acRtpRtcpEnableMediaUDPChecksum OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines whether to enable the UDP checksum calculation for
RTP media TX over IPv4. One of the following possible values:
0 = Disable (No checksum: UDP checksum for IPv4 TX = 0)
1 = Enable (UDP checksum will be in the UDP header upon IPv4
TX)
.
Access: Offline.
AC INI-Param: EnableMediaUDPChecksum"
::= {acRtpRtcp 5}
acRtp OBJECT IDENTIFIER ::= {acMediaRtpRtcpConfig 2}
acRtpBaseUDPPort OBJECT-TYPE
SYNTAX Unsigned32 (1024..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the lower boundary of UDP ports to be used by the board.
The upper boundary is calculated on the basis of BoardBaseUDPPort
+ 10 * (Number of Channels). This parameter value
must be a multiple of 10.
.
Access: Offline.
AC INI-Param: BASEUDPPORT"
::= {acRtp 1}
acRtpComfortNoiseEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to 1 (Enable), SID packets are sent with the RTP SID
type (RFC 3389).
0 = Disable
1 = Enable
Determines whether Silence Indicator (SID) packets that are
sent and received are according to RFC 3389.
0 = Disabled (default).
1 = Enabled.
Note: Applicable only to MP-11x and Mediant 1000.
.
Access: Online.
AC INI-Param: ENABLESTANDARDSIDPAYLOADTYPE"
::= {acRtp 2}
acRtpEnableRFC2658Interleaving OBJECT-TYPE
SYNTAX INTEGER {
withOut-RFC2658Interleaving-And-TOC(0)
,
including-RFC2658Interleaving-And-TOC(1)
,
including-TOC-Only(2)
,
interleave-Bundling(3)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"When enabled, RTP packets include an interleaving byte for VBR
coders.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: ENABLERFC2658INTERLEAVING"
::= {acRtp 3}
acRtpRxTxMode OBJECT-TYPE
SYNTAX INTEGER {
rTPTxRx(0)
,
rTPTxOnly(1)
,
rTPRxOnly(2)
,
rTPUnactive(3)
,
rTPRxRFC2833Tx(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects which RTP directions are enabled. Both Tx and Rx sides
can be disabled.
0 = RTPTxRx
1 = RTPTxOnly
2 = RTPRxOnly
3 = RTPUnactive
4 = RTPRxRFC2833Tx.
Access: Online.
AC INI-Param: RTPDIRECTIONCONTROL"
::= {acRtp 4}
acRtpRFC2833TxPayloadType OBJECT-TYPE
SYNTAX Unsigned32 (96..127)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls the RFC 2833 Tx Relay RTP Payload type.
Range = 96 to 127.
Access: Online.
AC INI-Param: RFC2833TXPAYLOADTYPE"
::= {acRtp 5}
acRtpRFC2833RxPayloadType OBJECT-TYPE
SYNTAX Unsigned32 (96..127)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls the RFC 2833 Rx Relay RTP Payload type.
Range = 96 to 127.
Access: Online.
AC INI-Param: RFC2833RXPAYLOADTYPE"
::= {acRtp 6}
acRtpRedundancyPayloadType OBJECT-TYPE
SYNTAX Unsigned32 (96..127)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter sets the RFC 2198 (RTP Redundancy) packet's parameter
'RTP Payload Type'.
Range: 96 to 127.
Access: Online.
AC INI-Param: RFC2198PAYLOADTYPE"
::= {acRtp 7}
acRtpRedundancyDepth OBJECT-TYPE
SYNTAX Unsigned32 (0..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Redundancy depth of RFC 2198 redundancy packets.
0 = Disabled
In Gen 3 boards: range is 0-5
For other Gens 0-1.
Access: Online.
AC INI-Param: RTPREDUNDANCYDEPTH"
::= {acRtp 8}
acRtpPacketizationFactor OBJECT-TYPE
SYNTAX Unsigned32 (1..12)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the number of DSP payloads for generating one RTP packet.
Range = Hardware dependent.
Access: Online.
AC INI-Param: RTPPACKINGFACTOR"
::= {acRtp 9}
acRtpNoOpPayloadType OBJECT-TYPE
SYNTAX Unsigned32 (96..127)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"User can modify the Noop packets RTP Payload type by setting
this parameter.
Range = 96 to 127.
Access: Online.
AC INI-Param: RTPNOOPPAYLOADTYPE"
::= {acRtp 10}
acRtpNoOpEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables / disable Noop packets sending mode.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: NoOpEnable"
::= {acRtp 11}
acRtpNoOpInterval OBJECT-TYPE
SYNTAX Unsigned32 (20..600000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to modify the Noop packets sending interval
Parameter value is in milliseconds
Default value = 10 sec (10000 msec)
Range = 20 to 600000
(20 msec to 10 min - 10 min = 600000).
Access: Online.
AC INI-Param: NoOpInterval"
::= {acRtp 12}
acRtpVBRCoderHeaderFormat OBJECT-TYPE
SYNTAX INTEGER {
withOut-RFC2658Interleaving-And-TOC(0)
,
including-RFC2658Interleaving-And-TOC(1)
,
including-TOC-Only(2)
,
interleave-Bundling(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0 - payload only (no header, no toc, no m-factor)
1- support RFC 2658 format, 1 byte for interleaving header
(always 0) and toc, no m-factor
2 <20> payload including toc only, allow m-factor
3- RFC 3358 format
.
Access: Online.
AC INI-Param: VBRCoderHeaderFormat"
::= {acRtp 13}
acRtpAMRCoderHeaderFormat OBJECT-TYPE
SYNTAX INTEGER {
cE-AMR-DEFAULT-FORMAT(0)
,
cE-AMR-RFC-3267-BUNDLING(1)
,
cE-AMR-RFC-3267-INTERLEAVING(2)
,
cE-AMR-IF2(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"AMR_CODER_HEADER_DEFAULT_FORMAT=0 - old m factor, each frame
contains CRM byte and toc
RFC_3267_BUNDLING=1 - single CRM byte followed by toc tables
RFC_3267_INTERLEAVING=2 - supported as receivers only.
Access: Online.
AC INI-Param: AMRCODERHEADERFORMAT"
::= {acRtp 14}
acRtpAMRFECRedundancyDepth OBJECT-TYPE
SYNTAX INTEGER {
cE-AMR-FEC-REDUNDANCY-LEVEL-NONE(0)
,
cE-AMR-FEC-REDUNDANCY-LEVEL-1(1)
,
cE-AMR-FEC-REDUNDANCY-LEVEL-2(2)
,
cE-AMR-FEC-REDUNDANCY-LEVEL-3(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the AMR / WB-AMR Redundancy depth according to RFC 3267.
0 = No Redundancy
1 = Redundancy depth of a single packet
2 = Redundancy depth of 2 packets
3 = Redundancy depth of 3 packets
.
Access: Online.
AC INI-Param: AMRFECREDUNDANCYDEPTH"
::= {acRtp 15}
acRtpAMRFECNumOfMngtPolicyEntries OBJECT-TYPE
SYNTAX Unsigned32 (0..9)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the number of entries to be defined at the AMR management
policy table. Each entry defines the policy of a different
rate.
Access: Online.
AC INI-Param: AMRFECNUMBEROFCODECMODES"
::= {acRtp 16}
acRtpAMRFECDelayHysteresis OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the hysteresis of the Delay Threshold for AMR Hand-out
events (in msec).
Access: Online.
AC INI-Param: AMRFECDELAYHYSTERESIS"
::= {acRtp 17}
acRtpAMRFECDelayThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the one-way delay value (in msec) that may cause the
AMR Hand Out report.
0 = 'Hand Out' report is disabled (default).
Access: Online.
AC INI-Param: AMRFECDELAYTHRESHHOLD"
::= {acRtp 18}
acRtpQcelpCoderHeaderFormat OBJECT-TYPE
SYNTAX INTEGER {
parameter-Is-Not-Used(-1)
,
including-RFC2658Interleaving-And-TOC(1)
,
including-TOC-Only(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines whether to define a separate header format for the
QCELP coder (different to the header format of EVRC coder).
One of the following values:
-1 - QCELP coder uses the same header format as EVRC
coder,
according to VBRCoderHeaderFormat parameter.
1 to 2 - QCELP coder uses the value defined by this parameter
to
define its header format.
This parameter is relevant only for Control Protocol users.
TPNCP and PCI users should always use -1 value.
Access: Instant.
AC INI-Param: QcelpCoderHeaderFormat"
::= {acRtp 19}
acRtpAMROctetAlignedEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0 = disable the AMR Octet Aligned mode.
1 = enable the AMR Octet Aligned mode.
Access: Online.
AC INI-Param: AmrOctetAlignedEnable"
::= {acRtp 20}
acAMRFECCodecPolicies OBJECT IDENTIFIER ::= {acRtp 21}
-- ****************************************
-- acAMRFECCodecPolicies table declaration
-- ****************************************
acAMRFECCodecPoliciesTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcAMRFECCodecPoliciesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= {acAMRFECCodecPolicies 1}
-- ****************************************
-- acAMRFECCodecPolicies table entry
-- ****************************************
acAMRFECCodecPoliciesEntry OBJECT-TYPE
SYNTAX AcAMRFECCodecPoliciesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX {acAMRFECCodecPoliciesIndex}
::= {acAMRFECCodecPoliciesTable 1}
-- ****************************************
-- acAMRFECCodecPolicies TABLE
-- ****************************************
AcAMRFECCodecPoliciesEntry ::= SEQUENCE {
acAMRFECCodecPoliciesIndex Unsigned32,
acAMRFECCodecPoliciesRowStatus RowStatus,
acAMRFECCodecPoliciesRate Unsigned32,
acAMRFECCodecPoliciesRedundancyLevel Unsigned32,
acAMRFECCodecPoliciesThreshold Unsigned32,
acAMRFECCodecPoliciesHysteresis Unsigned32
}
acAMRFECCodecPoliciesIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
AC INI-Param: AMRFECCodecPolicies_Index"
::= {acAMRFECCodecPoliciesEntry 1}
acAMRFECCodecPoliciesRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
AC INI-Param: N/A"
::= {acAMRFECCodecPoliciesEntry 2}
acAMRFECCodecPoliciesRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"AMR Rate x of policy x (values 0-8).
Access: Online.
AC INI-Param: AMRFECCodecPolicies_Rate"
::= {acAMRFECCodecPoliciesEntry 3}
acAMRFECCodecPoliciesRedundancyLevel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Redundancy Level for policy x. Same values as <20>RFC 3267 Redundancy<63>
field.
Access: Online.
AC INI-Param: AMRFECCodecPolicies_RedundancyLevel"
::= {acAMRFECCodecPoliciesEntry 4}
acAMRFECCodecPoliciesThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"FLR (Frame Loss Ratio) threshold of policy 1. Values are taken
from 3GPP TS 44.318 (0-63).
Access: Online.
AC INI-Param: AMRFECCodecPolicies_Threshold"
::= {acAMRFECCodecPoliciesEntry 5}
acAMRFECCodecPoliciesHysteresis OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Hysteresis of FLR threshold for policy 1. Values are taken from
3GPP TS 44.318. (0-15).
Access: Online.
AC INI-Param: AMRFECCodecPolicies_Hysteresis"
::= {acAMRFECCodecPoliciesEntry 6}
acRtcp OBJECT IDENTIFIER ::= {acMediaRtpRtcpConfig 3}
acRtcpDisableIntervalRandomization OBJECT-TYPE
SYNTAX Unsigned32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls whether RTCP report intervals are randomized or whether
each report interval accords exactly to the parameter defining
RTCP Mean Tx Interval (in milliseconds).
0 = Randomize
1 = Don<6F>t Randomize.
Access: Online.
AC INI-Param: DISABLERTCPRANDOMIZE"
::= {acRtcp 1}
acRtcpXr OBJECT IDENTIFIER ::= {acMediaRtpRtcpConfig 4}
acRtcpXrBurstThreshold OBJECT-TYPE
SYNTAX Integer32 (-1..12)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"voice quality monitoring - excessive burst alert threshold.
if set to -1, no alerts will be issued.
Access: Online.
AC INI-Param: VQMONBURSTHR"
::= {acRtcpXr 1}
acRtcpXrDelayThreshold OBJECT-TYPE
SYNTAX Integer32 (-1..12)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"voice quality monitoring - excessive delay alert threshold.
if set to -1, no alerts will be issued.
Access: Online.
AC INI-Param: VQMONDELAYTHR"
::= {acRtcpXr 2}
acRtcpXrEndOofCallRvalDelayThreshold OBJECT-TYPE
SYNTAX Integer32 (-1..12)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"voice quality monitoring - end of call low quality alert threshold.
if set to -1, no alerts will be issued.
Access: Online.
AC INI-Param: VQMONEOCRVALTHR"
::= {acRtcpXr 3}
acRtcpXrGMin OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"voice quality monitoring - minimum gap size (number of frames).
Access: Online.
AC INI-Param: VQMONGMIN"
::= {acRtcpXr 4}
acRtcpXrEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
,
enableOnlyCalculation(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets voice quality monitoring (RTCP-XR) mode.
0 = Disable
1 = Enable all
2 = Enable Only Calculation.
Access: Offline.
AC INI-Param: VQMONENABLE"
::= {acRtcpXr 5}
acVideoRtpRtcp OBJECT IDENTIFIER ::= {acMediaRtpRtcpConfig 5}
acVideoRtpRtcpDisableRtcpIntervalRandomization OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines whether to enable RTCP Interval Randomization. One
of the following values: 0 Enable RTCP Interval Randomization
1 Disable RTCP Interval Randomization
.
Access: Online.
AC INI-Param: VideoDisableRtcpIntervalRandomization"
::= {acVideoRtpRtcp 1}
acVideoRtpRtcpMeanTxInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the mean interval between two transmitted RTCP packets
(milliseconds). If the interval is set to 0, no RTCP packets
are transmitted at all.
Access: Online.
AC INI-Param: VideoRtcpMeanTxInterval"
::= {acVideoRtpRtcp 2}
acVideoRtpRtcpBrokenConnectionActivationMode OBJECT-TYPE
SYNTAX INTEGER {
afterFirstIncomingRtpPacket (0)
,
onRtpStreamActivation (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Broken connection event activation mode.
0 - Activate broken connection after the arrival of the first
RTP packet.
1 - Activate broken connection immediately after the Activate
RTP command.
.
Access: Online.
AC INI-Param: VideoBrokenConnectionActivationMode"
::= {acVideoRtpRtcp 3}
acVideoRtpRtcpBrokenConnectionEventTimeout OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Timeout that defines when broken connection event occurs.
Time resolution is 20msec.
Access: Online.
AC INI-Param: VideoBrokenConnectionEventTimeout"
::= {acVideoRtpRtcp 4}
acMediaIBSConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 5}
acIBS OBJECT IDENTIFIER ::= {acMediaIBSConfig 1}
acIBSAnalogSignalTransportType OBJECT-TYPE
SYNTAX INTEGER {
ignore(0)
,
transfer(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the analog signal transport type.
0 = Ignore
1 = Transfer hookflash via RFC 2833.
Access: Online.
AC INI-Param: ANALOGSIGNALTRANSPORTTYPE"
::= {acIBS 1}
acIBSDTMFVolume OBJECT-TYPE
SYNTAX Integer32 (-31..0)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines and controls the DTMF generation volume [-dBm].
Range = -31 to 0.
Access: Online.
AC INI-Param: DTMFVOLUME"
::= {acIBS 2}
acIBSDTMFTransportType OBJECT-TYPE
SYNTAX INTEGER {
acMuteDTMF(0)
,
acTransparentDTMF(2)
,
acRFC2833RelayDTMF(3)
,
acRFC2833RelayDecoderMute(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the type of DTMF transport.
0 = Erase DTMFs from voice transport not relayed to remote
2 = DTMFs not erased are not relayed to remote
3 = DTMFs are muted from the voice stream and relayed according
to RFC 2833
7 = DTMFs are sent according to RFC 2833 and muted when received.
Access: Online.
AC INI-Param: DTMFTRANSPORTTYPE"
::= {acIBS 3}
acIBSMFTransportType OBJECT-TYPE
SYNTAX INTEGER {
acMuteMF(0)
,
acTransparentMF(2)
,
acRFC2833RalayMF(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the type of MF transport.
0 = Erase MFs from voice transport not relayed to remote
2 = MFs not erased are not relayed to remote
3 = MFs are muted from the voice stream and relayed according
to RFC 2833.
Access: Online.
AC INI-Param: MFTRANSPORTTYPE"
::= {acIBS 4}
acIBSTrunkTestingTonesEnable OBJECT-TYPE
SYNTAX INTEGER {
disables (0)
,
enables (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables trunk testing tones.
0 = Disables trunk testing tones
1 = Enables trunk testing tones.
Access: Offline.
AC INI-Param: ENABLETRUNKTESTINGTONES"
::= {acIBS 5}
acIBSCASRelayTransportMode OBJECT-TYPE
SYNTAX INTEGER {
cASEventsOnly(0)
,
cASRFC2833Relay(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls the ABCD signaling transport type over IP.
0 = No Relay over the network
1 = Enable CAS relay according to RFC 2833.
Access: Online.
AC INI-Param: CASTRANSPORTTYPE"
::= {acIBS 6}
acIBSRxDtmfHangOverTime OBJECT-TYPE
SYNTAX Unsigned32 (0..2000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to configure the Voice Silence time (in ms units) after
playing DTMF or MF digits to the TDM side that arrived as Relay
from the Network side.
Range from 0 to 2000, Default 1000.
Access: Online.
AC INI-Param: RxDtmfHangOverTime"
::= {acIBS 7}
acIBSTxDtmfHangOverTime OBJECT-TYPE
SYNTAX Unsigned32 (0..2000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Voice Silence time (in ms units) after detecting the end of
DTMF or MF digits at the TDM side when the DTMF Transport Type
is either Relay or Mute.This feature allows the user to configure
the silence time.
.
Access: Online.
AC INI-Param: TxDtmfHangOverTime"
::= {acIBS 8}
acIBSDTMFTwistControl OBJECT-TYPE
SYNTAX Integer32 (-10..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines a delta (in dB) between the high and low frequency component
in the DTMF signal. dB Positive values cause the higher
frequency component to be stronger than the lower one.
Negative values cause the opposite effect. For any parameter
value, both components change so that their average is constant.
Range = -10 to 10.
Access: Offline.
AC INI-Param: DTMFGenerationTwist"
::= {acIBS 9}
acIBSNTEMaxDuration OBJECT-TYPE
SYNTAX Integer32 (-1..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximal time for sending NTEs (Named Telephony Events) to the
network, regardless of the time range when the TDM signal
is detected.
-1= NTE will stop only upon detection of End event (default).
Access: Online.
AC INI-Param: NTEMaxDuration"
::= {acIBS 10}
acIBSDetectors OBJECT IDENTIFIER ::= {acMediaIBSConfig 2}
acIBSDetectorsMFR1Enable OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables detection of MFR1 signaling.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: MFR1DETECTORENABLE"
::= {acIBSDetectors 1}
acIBSDetectorsMFR2ForwardEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables detection of MFR2 forward signaling.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: MFR2FORWARDDETECTORENABLE"
::= {acIBSDetectors 2}
acIBSDetectorsMFR2BackwardEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables detection of MFR2 backward signaling.
Access: Online.
AC INI-Param: MFR2BACKWARDDETECTORENABLE"
::= {acIBSDetectors 3}
acIBSDetectorsR1LineEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables detection of Line signaling.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: R1LINEDETECTORENABLE"
::= {acIBSDetectors 4}
acIBSDetectorsR2LineEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables detection of Line signaling.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: R2LINEDETECTORENABLE"
::= {acIBSDetectors 5}
acIBSDetectorsAC15Enable OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables detection of Line signaling.
Access: Online.
AC INI-Param: AC15DETECTORENABLE"
::= {acIBSDetectors 6}
acIBSDetectorsDTMFEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables detection of DTMF signaling.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: DTMFDETECTORENABLE"
::= {acIBSDetectors 7}
acIBSDetectorsCallProgressEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables detection of Call Progress Tones.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: CALLPROGRESSDETECTORENABLE"
::= {acIBSDetectors 8}
acIBSDetectorsUserDefinedToneEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables detection of User Defined Tones signaling.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: USERDEFINEDTONEDETECTORENABLE"
::= {acIBSDetectors 9}
acIBSDetectorsDetectionRedirection OBJECT-TYPE
SYNTAX INTEGER {
pcm(0)
,
network(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the IBS (In-Band Signaling) Detection Direction.
0 = PCM
1 = Network.
Access: Online.
AC INI-Param: IBSDETECTIONREDIRECTION"
::= {acIBSDetectors 10}
acIBSDetectorsSS4Enable OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables detection of Line signaling.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: SS4DETECTORENABLE"
::= {acIBSDetectors 11}
acIBSDetectorsMFSS5Enable OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables detection of MF SS5 line signaling.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: MFSS5DETECTORENABLE"
::= {acIBSDetectors 12}
acIBSDetectorsSS5Enable OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Detection of Line signaling.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: SS5DETECTORENABLE"
::= {acIBSDetectors 13}
acIBSDetectorsSITEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables SIT (Special Information Tone) detection
according to the ITU-T recommendation E.180/Q.35.
0 = Disable
1 = Enable.
Access: Offline.
AC INI-Param: SITDETECTORENABLE"
::= {acIBSDetectors 14}
acIBSDetectorsCOTEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables Continuity Test tone detection and generation
according to the ITU-T Q.724 recommendation.
0 = Disable
1 = Enable.
Access: Offline.
AC INI-Param: ENABLECONTINUITYTONES"
::= {acIBSDetectors 15}
acIBSDetectorsR1DetectionStandard OBJECT-TYPE
SYNTAX INTEGER {
mfR1DetectionStandardItu (0)
,
mfR1DetectionStandardR15 (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter determines which one of the R1 MF protocol flavors
will be used for detection.
0 = ITU
1 = R1.5.
Access: Offline.
AC INI-Param: R1DetectionStandard"
::= {acIBSDetectors 16}
acIBSDetectorsUDTDetectorFrequencyDeviation OBJECT-TYPE
SYNTAX Unsigned32 (1..50)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the deviation allowed for the detection of each signal
frequency. Units are in Hertz.
Valid values range 1-50.
Default value 50 Hz.
.
Access: Offline.
AC INI-Param: UDTDETECTORFREQUENCYDEVIATION"
::= {acIBSDetectors 17}
acIBSDetectorsCPTDetectorFrequencyDeviation OBJECT-TYPE
SYNTAX Unsigned32 (1..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the deviation allowed for the detection of each CPT
signal frequency. Units are in Hertz.
Valid values range 1-30.
Default value 10 Hz.
.
Access: Offline.
AC INI-Param: CPTDETECTORFREQUENCYDEVIATION"
::= {acIBSDetectors 18}
acIPMediaConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 6}
acIPMedia OBJECT IDENTIFIER ::= {acIPMediaConfig 1}
acIPMediaDSPDetectorsEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables DSP IP Media Detectors. Enabling this parameter
might reduce the board channel capacity.
0 = Disable
1 = Enable.
Access: Offline.
AC INI-Param: ENABLEDSPIPMDETECTORS"
::= {acIPMedia 1}
acIPMediaEnableMCApplication OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables media control functionality.
Access: Offline.
AC INI-Param: ENABLEMEDIACONTROL"
::= {acIPMedia 2}
acIPMAnswerDetector OBJECT IDENTIFIER ::= {acIPMediaConfig 2}
acIPMAnswerDetectorEnable OBJECT-TYPE
SYNTAX INTEGER {
no(0)
,
yes(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables activation of the AD (Answer Detector).
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: ENABLEANSWERDETECTOR"
::= {acIPMAnswerDetector 1}
acIPMAnswerDetectorActivityDelay OBJECT-TYPE
SYNTAX Unsigned32 (0..128)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls (in 100 msec resolution) the time between sending Activation
command (AnswerDetector = 1) and the time that the
detector actually starts to work.
Range = 0 to 0x3FF.
Access: Online.
AC INI-Param: ANSWERDETECTORACTIVITYDELAY"
::= {acIPMAnswerDetector 2}
acIPMAnswerDetectorSilenceTime OBJECT-TYPE
SYNTAX Unsigned32 (0..128)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter controls the silence time period (in 100 msec
resolution) from no speech input until the END_OF_SPEECH event
is sent.
10 = 1 second
Range = 0 to 0x3FF.
Access: Online.
AC INI-Param: ANSWERDETECTORSILENCETIME"
::= {acIPMAnswerDetector 3}
acIPMAnswerDetectorRedirection OBJECT-TYPE
SYNTAX INTEGER {
speechPCMSideDetected(0)
,
speechIPSideDetected(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the AD (Answer Detector) Redirection.
0 (PCM) = Speech from the PCM side is detected
1 (Network) = Speech from the IP side is detected.
Access: Online.
AC INI-Param: ANSWERDETECTORREDIRECTION"
::= {acIPMAnswerDetector 4}
acIPMAnswerDetectorSensitivity OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls the AD (Answer Detector) sensitivity.
The allowed values are different for different boards:
DSP Gen2-based products: range 0 - 2, default 0.
DSP Gen2-based products: range 0 - 7, default 3.
Lowest value matches highest sensitivity and vice versa.
Access: Online.
AC INI-Param: ANSWERDETECTORSENSITIVITY"
::= {acIPMAnswerDetector 5}
acIPMEnergyDetector OBJECT IDENTIFIER ::= {acIPMediaConfig 3}
acIPMEnergyDetectorEnable OBJECT-TYPE
SYNTAX INTEGER {
no(0)
,
yes(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Activates the ED (Energy Detector).
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: ENABLEENERGYDETECTOR"
::= {acIPMEnergyDetector 1}
acIPMEnergyDetectorQualityFactor OBJECT-TYPE
SYNTAX Unsigned32 (0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the ED's (Energy Detector's) sensitivity (0 -10).
0 = Insensitive
10 = Most Sensitive
Range = 0 to 10.
Access: Online.
AC INI-Param: ENERGYDETECTORQUALITYFACTOR"
::= {acIPMEnergyDetector 2}
acIPMEnergyDetectorThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the ED's (Energy Detector's) threshold. A signal exceeding
the threshold invokes an 'Above' or 'Below' event.
ActualThreshold = -44 dBm + (EDThreshold * 6)
Default = 3 = -26 dBm
Range: 0 to 7.
Access: Online.
AC INI-Param: ENERGYDETECTORTHRESHOLD"
::= {acIPMEnergyDetector 3}
acIPMEnergyDetectorEnergyRedirection OBJECT-TYPE
SYNTAX INTEGER {
tDM(0)
,
network(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects the direction of the energy detection.
0 = Detect from the TDM side
1 = Detect from the network side.
Access: Online.
AC INI-Param: ENERGYDETECTORREDIRECTION"
::= {acIPMEnergyDetector 4}
acIPMediaPatternDetector OBJECT IDENTIFIER ::= {acIPMediaConfig 4}
acIPMediaPatternDetectorEnable OBJECT-TYPE
SYNTAX INTEGER {
no(0)
,
yes(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables activation of the PD (Pattern Detector).
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: ENABLEPATTERNDETECTOR"
::= {acIPMediaPatternDetector 1}
acIPMediaPatternDetectorDetectionThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..31)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the number of consecutive patterns to trigger the pattern
detection event.
Range = 0 to 31.
Access: Offline.
AC INI-Param: PDTHRESHOLD"
::= {acIPMediaPatternDetector 2}
acIPMediaAMD OBJECT IDENTIFIER ::= {acIPMediaConfig 5}
acIPMediaAMDDetectionDirection OBJECT-TYPE
SYNTAX INTEGER {
acAmdTdmDetection(0)
,
acAmdNetworkDetection(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the AMD (Answer Machine Detector) detection direction.
One of the following values:
0 = Detection from the TDM side
1 = Detection from the Network side.
Access: Online.
AC INI-Param: AMDDETECTIONDIRECTION"
::= {acIPMediaAMD 1}
acIPMediaAMDSensitivity OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the AMD (Answer Machine Detector) detection sensitivity:
0 = Best detection of an answering machine
7 = Best detection of a live call.
Access: Online.
AC INI-Param: AMDDetectionSensitivity"
::= {acIPMediaAMD 2}
acIPMediaAMDDetectionSensitivityHighResolution OBJECT-TYPE
SYNTAX Unsigned32 (0..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the AMD (Answer Machine Detector) high resolution
detection sensitivity.
The high resolution has 16 levels of sensitivity while the
normal resolution (Answer Machine Detector Sensitivity) has
8 levels.
0 = Best detection of an answering machine
15 = Best detection of a live call.
Access: Online.
AC INI-Param: AMDSensitivityLevel"
::= {acIPMediaAMD 3}
acIPMediaAMDSensitivityResolution OBJECT-TYPE
SYNTAX INTEGER {
normal(0)
,
high(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the AMD (Answer Machine Detector) detection sensitivity
resolution:
0 = Normal detection sensitivity resolution (8 sensitivity
levels)
1 = High detection sensitivity resolution (16 sensitivity levels).
Access: Online.
AC INI-Param: AMDSensitivityParameterSuit"
::= {acIPMediaAMD 4}
acIPMediaAMDBeepDetectionTimeout OBJECT-TYPE
SYNTAX Unsigned32 (0..1638)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the AMD (Answer Machine Detector) Beep detection
timeout.
Units of 100 milliseconds, values from 0 to 1638 (163.8 seconds).
Access: Online.
AC INI-Param: AMDBeepDetectionTimeout"
::= {acIPMediaAMD 5}
acIPMediaAMDBeepDetectionSensitivity OBJECT-TYPE
SYNTAX Unsigned32 (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the AMD (Answer Machine Detector) Beep detection
sensitivity.
0 - Least sensitive.
3 - Most sensitive.
Access: Online.
AC INI-Param: AMDBeepDetectionSensitivity"
::= {acIPMediaAMD 6}
acIPMediaAMDSensitivityParameterSuit OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the serial number of the AMD (Answer Machine Detector)
parameter suit:
0 = USA Parameter Suit with normal detection sensitivity resolution
(8 sensitivity levels)
1 = USA Parameter Suit with high detection sensitivity resolution
(16 sensitivity levels)
2-7 : other countries parameter suits with up to 16 sensitivity
levels.
Access: Online.
AC INI-Param: AMDSensitivityParameterSuit"
::= {acIPMediaAMD 7}
acIPMediaAMDSensitivityLevel OBJECT-TYPE
SYNTAX Unsigned32 (0..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the AMD (Answer Machine Detector) level of detection
sensitivity.
It has 16 levels of sensitivity :
0 = Best detection of an answering machine
15 = Best detection of a live call.
Access: Online.
AC INI-Param: AMDSensitivityLevel"
::= {acIPMediaAMD 8}
acIPMConference OBJECT IDENTIFIER ::= {acIPMediaConfig 6}
acIPMConferenceGASNMinInterval OBJECT-TYPE
SYNTAX Unsigned32 (10..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Minimum interval between Active Speaker Notification (ASN) events.
An ASN event reports on the active speakers in a conference.
The event is issued whenever the active speakers change.
units = 100 ms
Minimum configurable interval between events is 500 ms (5 units).
Access: Instant.
AC INI-Param: ACTIVESPEAKERSNOTIFICATIONMININTERVAL"
::= {acIPMConference 1}
acIPMConferenceEnergythreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..39)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Conference - Minimum energy level for a user to be included
in Active Speaker Notification (ASN) events (units: -dBm).
Valid range 0 to (-39) dbm.
Access: Instant.
AC INI-Param: ActiveSpeakerEnergyThreshold"
::= {acIPMConference 2}
acIPMConferenceEnableHDConference OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable\Disable HD Conference.
Access: Offline.
AC INI-Param: EnableHDConference"
::= {acIPMConference 3}
acIPMVideoConference OBJECT IDENTIFIER ::= {acIPMediaConfig 7}
acIPMVideoConferenceSwitchingInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the video view rotation interval in seconds. Applicable
when using timer trigger switching mode.
Access: Online.
AC INI-Param: VideoConferenceSwitchingInterval"
::= {acIPMVideoConference 1}
acIPMVideoConferenceEnableActiveSpeakerHighlight OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Highlights the speaker for participants viewing a symmetric
layout (2x2 or 3x3) .
0 - Don't highlight active speaker.
1 - Highlight active speaker.
Access: Online.
AC INI-Param: VideoEnableActiveSpeakerHighlight"
::= {acIPMVideoConference 2}
acIPMVideoConferenceParticipantType OBJECT-TYPE
SYNTAX INTEGER {
regular(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates a participant's capabilities in the conference.
Regular (2) <20> Regular participant who is able to both send
and receive video.
.
Access: Online.
AC INI-Param: VideoConferenceParticipantType"
::= {acIPMVideoConference 3}
acIPMVideoConferenceParticipantTriggerMode OBJECT-TYPE
SYNTAX INTEGER {
triggerMode-Speaker(0)
,
triggerMode-Timer(1)
,
triggerMode-Fixed(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Participant trigger mode defines the trigger for modifying the
participant's view.
Voice Activated Video Switch (0) <20> A participant<6E>s view will
be changed according to the active speakers<72> detection.
Timer (1) <20> A participant<6E>s view is rotated every configured
time among the different video participants in the conference.
Fixed (3) <20> A participant<6E>s view is fixed.
.
Access: Online.
AC INI-Param: VideoConferenceParticipantTriggerMode"
::= {acIPMVideoConference 4}
acIPMVideoConferenceParticipantLayout OBJECT-TYPE
SYNTAX INTEGER {
layout-1XUSER(0)
,
layout-2x2-USERS(1)
,
layout-3x3-USERS(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the participant's view layout.
1 user (0).
2*2 users (1). All same size.
3*3 users (2). All same size.
.
Access: Online.
AC INI-Param: VideoConferenceParticipantLayout"
::= {acIPMVideoConference 5}
acIPMVideoConferenceEnableConferenceParticipantSelfView OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Self view indication.
0 - The participant cannot view himself
1 - The participant can view himself.
Access: Online.
AC INI-Param: VideoEnableConferenceParticipantSelfView"
::= {acIPMVideoConference 6}
acMediaCallerIDConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 7}
acCallerID OBJECT IDENTIFIER ::= {acMediaCallerIDConfig 1}
acCallerIDTypes OBJECT-TYPE
SYNTAX INTEGER {
bellcore (0)
,
eTSI (1)
,
nTT (2)
,
bT (4)
,
dTMF-Based-ETSI (16)
,
denmark (17)
,
indian (18)
,
brazilian (19)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the supported Caller ID standard.
0 = Bellcore
1 = ETSI
2 = NTT
4 = British
16 = ETSI_ETS
17 = Denmark
18 = Indian
19 = Brazilian.
Access: Online.
AC INI-Param: CALLERIDTYPE"
::= {acCallerID 1}
acCallerIDTransportType OBJECT-TYPE
SYNTAX INTEGER {
callerID-DISABLE(0)
,
callerID-RELAY(1)
,
callerID-MUTE(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the CallerID Transport type.
0 = Disable
1 = Relay
3 = Mute.
Access: Online.
AC INI-Param: CallerIDTransportType"
::= {acCallerID 2}
acCallerIDDTMFBasedMaxDigits OBJECT-TYPE
SYNTAX Unsigned32 (0..26)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the maximum number of DTMF digits in a DTMF-based
Caller ID string.
Range = 0 to 26.
Access: Online.
AC INI-Param: MAXDTMFDIGITSINCIDSTRING"
::= {acCallerID 3}
acCallerIDDTMFBasedMinDigits OBJECT-TYPE
SYNTAX Unsigned32 (0..26)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the mimumum number of DTMF digits in a DTMF-based
Caller ID string.
Range = 0 to 26.
Access: Online.
AC INI-Param: MINDTMFDIGITSINCIDSTRING"
::= {acCallerID 4}
acCallerIDNTTDIDSignallingForm OBJECT-TYPE
SYNTAX INTEGER {
nttDidFskSignalling (0)
,
nttDidDtmfBasedSignalling (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures the signalling format used when generating an NTT
DID.
0 = FSK Siganl
1 = DTMF Based Signal.
Access: Online.
AC INI-Param: NTTDIDSignallingForm"
::= {acCallerID 5}
acMediaNetworkConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 8}
acMediaNetwork OBJECT IDENTIFIER ::= {acMediaNetworkConfig 1}
acMediaNetworkDisableNAT OBJECT-TYPE
SYNTAX INTEGER {
no(0)
,
yes(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables the NAT feature.
0 = Do not disable NAT
1 = Disable NAT.
Access: Online.
AC INI-Param: DISABLENAT"
::= {acMediaNetwork 1}
acMediaNetworkRtpIpTos OBJECT-TYPE
SYNTAX Unsigned32 (0..15)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Sets value of IP Type Of Service field in IP header for all
packets generated from this channel. Follow the acTIPTOS enumeration.
Access: Instant.
AC INI-Param: IPTOS"
::= {acMediaNetwork 2}
acMediaNetworkRtpIpPrecedence OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Sets value of the IP precedence field in the IP header for all
packets generated from this channel. Follow the acTIPPrecedence
enumeration.
Access: Instant.
AC INI-Param: IPPRECEDENCE"
::= {acMediaNetwork 3}
acMediaNetworkIPDiffServ OBJECT-TYPE
SYNTAX Unsigned32 (0..63)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Defines the value of the 'DiffServ' field in the IP header for
media (RTP) traffic.
Range: 0 to 63.
Access: Instant.
AC INI-Param: IPDIFFSERV"
::= {acMediaNetwork 4}
acMediaNetworkInboundLatchMode OBJECT-TYPE
SYNTAX INTEGER {
strict(0)
,
dynamic(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the way of handling incoming media packets from
non-expected address/port.
Access: Online.
AC INI-Param: InboundMediaLatchMode"
::= {acMediaNetwork 5}
acMediaJBConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 9}
acJitterBuffer OBJECT IDENTIFIER ::= {acMediaJBConfig 1}
acJitterBufferMinDelay OBJECT-TYPE
SYNTAX Unsigned32 (0..150)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the Dynamic Jitter Buffer Minimum Delay (in msec).
Recommended value for a regular voice call is 10.
Access: Online.
AC INI-Param: DJBUFMINDELAY"
::= {acJitterBuffer 1}
acJitterBufferOptFactor OBJECT-TYPE
SYNTAX Unsigned32 (0..13)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the Dynamic Jitter Buffer frame error/delay optimization.
Recommended value for a regular voice call is 10.
Access: Online.
AC INI-Param: DJBUFOPTFACTOR"
::= {acJitterBuffer 2}
acVideoJitterBuffer OBJECT IDENTIFIER ::= {acMediaJBConfig 2}
acVideoJitterBufferMinDelay OBJECT-TYPE
SYNTAX Unsigned32 (0..500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Jitter buffer minimum delay in milliseconds. Must be less than
JitterBufferMaxDelay.
Access: Online.
AC INI-Param: VideoJitterBufferMinDelay"
::= {acVideoJitterBuffer 1}
acVideoJitterBufferMaxDelay OBJECT-TYPE
SYNTAX Unsigned32 (0..500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Jitter buffer maximum delay in milliseconds.
Access: Online.
AC INI-Param: VideoJitterBufferMaxDelay"
::= {acVideoJitterBuffer 2}
acVideoJitterBufferDJBOptimizationFactor OBJECT-TYPE
SYNTAX Unsigned32 (0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"JB Optimization Factor controls the jitter buffer's adaptation
rates
A High factor means fast adaptation when jitter increases,
and a slow adaptation when jitter decrease.
Small factor means slow adaptation when jitter increases, and
a fast adaptation when jitter decreases.
.
Access: Online.
AC INI-Param: VideoDJBOptimizationFactor"
::= {acVideoJitterBuffer 3}
acMediaStatus OBJECT IDENTIFIER ::= {acMedia 2}
acMediaAggregation OBJECT IDENTIFIER ::= {acMediaConfiguration 10}
acMediaAggregationRemoteBaseUDPPort OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remote Base UDP Port For Aggrigation.
Access: Offline.
AC INI-Param: REMOTEBASEUDPPORT"
::= {acMediaAggregation 1}
acMediaAggregationL1L1ComplexRxUDPPort OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The UDP port for the incoming (from the remote side) and the
outgoing (destination UDP) packets, for Complex Multiplexed
RTP mode.
Access: Offline.
AC INI-Param: L1L1ComplexRxUDPPort"
::= {acMediaAggregation 2}
acMediaAggregationL1L1ComplexTxUDPPort OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Source UDP port for the outgoing UDP Multiplexed RTP packets,
for Complex-Multiplex RTP mode.
Access: Offline.
AC INI-Param: L1L1ComplexTxUDPPort"
::= {acMediaAggregation 3}
acIPLegs OBJECT IDENTIFIER ::= {acMediaStatus 1}
-- ****************************************
-- acIPLegs table declaration
-- ****************************************
acIPLegsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcIPLegsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= {acIPLegs 1}
-- ****************************************
-- acIPLegs table entry
-- ****************************************
acIPLegsEntry OBJECT-TYPE
SYNTAX AcIPLegsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX {acIPLegsLegIndex}
::= {acIPLegsTable 1}
-- ****************************************
-- acIPLegs TABLE
-- ****************************************
AcIPLegsEntry ::= SEQUENCE {
acIPLegsLegIndex Unsigned32,
acIPLegsCallIndex Unsigned32,
acIPLegsRTPActive INTEGER,
acIPLegsCoderType INTEGER,
acIPLegsSilenceCompression INTEGER,
acIPLegsDTMFDetection INTEGER,
acIPLegsLocalRTPPort Unsigned32,
acIPLegsRemoteRTPAddress IpAddress,
acIPLegsFaxTransportType INTEGER,
acIPLegsRxPackets Unsigned32,
acIPLegsTxPackets Unsigned32,
acIPLegsRxBytes Unsigned32,
acIPLegsTxBytes Unsigned32,
acIPLegsJitter Unsigned32,
acIPLegsPacketLoss Unsigned32,
acIPLegsSSRCOfSender Unsigned32,
acIPLegsDSPDevice Unsigned32,
acIPLegsLegName SnmpAdminString
}
acIPLegsLegIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes Rtp Endpoint In A Specific Call.
AC INI-Param: N/A"
::= {acIPLegsEntry 1}
acIPLegsCallIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Decribes The Call which The Rtp EndPoint Participant In It.
AC INI-Param: N/A"
::= {acIPLegsEntry 2}
acIPLegsRTPActive OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Decribes whether the RTP is active or not.
AC INI-Param: N/A"
::= {acIPLegsEntry 3}
acIPLegsCoderType OBJECT-TYPE
SYNTAX INTEGER {
acG711Alaw-64(0)
,
acG711Mulaw(1)
,
acG726-16(2)
,
acG726-24(3)
,
acG726-32 (4)
,
acG726-40(5)
,
acG727-16(6)
,
acG727-24-16(7)
,
acG727-24(8)
,
acG727-32-16(9)
,
acG727-32-24(10)
,
acG727-32(11)
,
acG727-40-16(12)
,
acG727-40-24(13)
,
acG727-40-32(14)
,
acG723Low(15)
,
acG723High(16)
,
acG729(17)
,
acGSM610(18)
,
vacGSM610MS(20)
,
acGSM-EFR(21)
,
acTransparent(22)
,
acG728(23)
,
acNetCoder-4-8(25)
,
acNetCoder-5-6(26)
,
acNetCoder-6-4(27)
,
acNetCoder-7-2(28)
,
acNetCoder-8(29)
,
acNetCoder-8-8(30)
,
acNetCoder-9-(31)
,
acEVRC(32)
,
acEVRC-TFO(33)
,
acQCELP-8(34)
,
acQCELP-8-TFO(35)
,
acQCELP-13(36)
,
acQCELP-13-TFO(37)
,
acEVRC-TTY(38)
,
acNoCoder(40)
,
acModemAnswer(41)
,
acModemCall(42)
,
acVoxADPCM(43)
,
acG711Alaw-5-5(45)
,
acG711Mulaw-5-5(46)
,
acG726-32-5-5(47)
,
acG729E(48)
,
acLinearPCM(49)
,
acAMR-4-7(50)
,
acAMR-5-15(51)
,
acAMR-5-9(52)
,
acAMR-6-7(53)
,
acAMR-7-4(54)
,
acAMR-7-95(55)
,
acAMR-10-2(56)
,
acAMR-12-2(57)
,
acEVRC-B(58)
,
acEVRC-TFOV(60)
,
acQCELP-8-TFOV(61)
,
acQCELP-13-TFOV(62)
,
acILBC-15(63)
,
acILBC-13(64)
,
acBV-16(65)
,
acAMRWB-6-6(66)
,
acAMRWB-8-85(67)
,
acAMRWB-12-65(68)
,
acAMRWB-14-25(69)
,
acAMRWB-15-85(70)
,
acAMRWB-18-25(71)
,
acAMRWB-19-85(72)
,
acAMRWB-23-05(73)
,
acAMRWB-23-85(74)
,
acG722-48K(75)
,
acG722-56K(76)
,
acG722-64K(77)
,
acDPNSSCoder(78)
,
acEG711Alaw-10ms(80)
,
acEG711Alaw-20ms(81)
,
acEG711Alaw-30ms(82)
,
acEG711Mulaw-10ms(83)
,
acEG711Mulaw-20ms(84)
,
acEG711Mulaw-30ms(85)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"describes the coder Type.
AC INI-Param: N/A"
::= {acIPLegsEntry 4}
acIPLegsSilenceCompression OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enables or Disables the Silence Compression.
AC INI-Param: N/A"
::= {acIPLegsEntry 5}
acIPLegsDTMFDetection OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enables or Disables the DTMF Detection.
AC INI-Param: N/A"
::= {acIPLegsEntry 6}
acIPLegsLocalRTPPort OBJECT-TYPE
SYNTAX Unsigned32 (0..20000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the RTP port of the Leg.
AC INI-Param: N/A"
::= {acIPLegsEntry 7}
acIPLegsRemoteRTPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the RTP address.
AC INI-Param: N/A"
::= {acIPLegsEntry 8}
acIPLegsFaxTransportType OBJECT-TYPE
SYNTAX INTEGER {
transparent(0)
,
relay(1)
,
bypass(2)
,
withevents(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the Fax transfor Type currently working.
AC INI-Param: N/A"
::= {acIPLegsEntry 9}
acIPLegsRxPackets OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the received packets on the Leg.
AC INI-Param: N/A"
::= {acIPLegsEntry 10}
acIPLegsTxPackets OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the Transmitted packets on the Leg.
AC INI-Param: N/A"
::= {acIPLegsEntry 11}
acIPLegsRxBytes OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the received Bytes on the Leg.
AC INI-Param: N/A"
::= {acIPLegsEntry 12}
acIPLegsTxBytes OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the Transmitted packets on the Leg.
AC INI-Param: N/A"
::= {acIPLegsEntry 13}
acIPLegsJitter OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the Jitter on the Leg.
AC INI-Param: N/A"
::= {acIPLegsEntry 14}
acIPLegsPacketLoss OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the Lost packets on the Leg.
AC INI-Param: N/A"
::= {acIPLegsEntry 15}
acIPLegsSSRCOfSender OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the SSRC Of the Sender.
AC INI-Param: N/A"
::= {acIPLegsEntry 16}
acIPLegsDSPDevice OBJECT-TYPE
SYNTAX Unsigned32 (0..2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the DSP Device Of the Leg.
AC INI-Param: N/A"
::= {acIPLegsEntry 17}
acIPLegsLegName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the Leg Name as in the Control Protocol.
AC INI-Param: N/A"
::= {acIPLegsEntry 18}
acStreamingCache OBJECT IDENTIFIER ::= {acMediaConfiguration 11}
acStreamingCacheSize OBJECT-TYPE
SYNTAX Unsigned32 (0..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the streaming cache size in MBs.
The remaining size (out of 32MBs) is used as VoicePrompt storage.
Access: Offline.
AC INI-Param: gStreamingCacheSize"
::= {acStreamingCache 1}
acStreamingCacheRefreshTime OBJECT-TYPE
SYNTAX Integer32 (-1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the streaming cache data refresh time in minutes. If
-1 is set, refresh is off.
Access: Offline.
AC INI-Param: gStreamingCacheRefreshTime"
::= {acStreamingCache 2}
acStreamingCacheClearService OBJECT-TYPE
SYNTAX Unsigned32 (1..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"reset the streaming cache.
Access: Instant.
AC INI-Param: N/A"
::= {acStreamingCache 3}
acMediaVideoConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 12}
acMediaVideoConfigEncoderIntraInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the frequency for the number of frames at which the encoder
outputs an Intra frame.
Access: Online.
AC INI-Param: VideoEncoderIntraInterval"
::= {acMediaVideoConfig 1}
acMediaVideoConfigMaxPacketSize OBJECT-TYPE
SYNTAX Unsigned32 (1..1400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the maximum packet size in bytes.
Access: Online.
AC INI-Param: VideoMaxPacketSize"
::= {acMediaVideoConfig 2}
acMediaVideoConfigTargetBitrate OBJECT-TYPE
SYNTAX Unsigned32 (1..384)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the target output bit rate.
Access: Online.
AC INI-Param: VideoTargetBitrate"
::= {acMediaVideoConfig 3}
acMediaVideoConfigQualityParameterForRateControl OBJECT-TYPE
SYNTAX Unsigned32 (0..31)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This value determines the trade off between video quality and
frame rate. A low value indicates a higher quality with a
lower frame rate and vice versa.
Access: Online.
AC INI-Param: VideoQualityParameterForRateControl"
::= {acMediaVideoConfig 4}
acMediaVideoConfigRateControlType OBJECT-TYPE
SYNTAX INTEGER {
ceVideoConstantBitRate (0)
,
ceVideoVaribleBitRate(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets bitrate output to either a constant or a variable bit rate.
CBR (0) <20> Constant Bit Rate.
VBR (1) <20> Variable Bit Rate. Target Bitrate indicates the target
average output bit rate.
.
Access: Online.
AC INI-Param: VideoRateControlType"
::= {acMediaVideoConfig 5}
acMediaVideoConfigEnableReSyncHeader OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether to add a video packet header to every packet
in order to increase error resilience.
0 - Disable
1 - Enable.
Access: Online.
AC INI-Param: VideoEnableReSyncHeader"
::= {acMediaVideoConfig 6}
acMediaVideoConfigEnableAudioVideoSynchronization OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines whether to enable audio and video synchronization.
0 - No synchronization between audio and video streams
1 - Synchronization between audio and video streams
.
Access: Online.
AC INI-Param: EnableAudioVideoSynchronization"
::= {acMediaVideoConfig 7}
acIPMediaChannels OBJECT IDENTIFIER ::= {acMediaConfiguration 13}
acIPMediaChannelsEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether to enable DSP channels reservation for IPmedia support.
Relevant for Mediant 1000 board only. One of the following
possible
0 = Disable
1 - Enable.
Access: Offline.
AC INI-Param: EnableIPMediaChannels"
::= {acIPMediaChannels 1}
-- ****************************************
-- acIPMediaChannelsResources table declaration
-- ****************************************
acIPMediaChannelsResourcesTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcIPMediaChannelsResourcesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IPMedia channels info"
::= {acIPMediaChannels 21}
-- ****************************************
-- acIPMediaChannelsResources table entry
-- ****************************************
acIPMediaChannelsResourcesEntry OBJECT-TYPE
SYNTAX AcIPMediaChannelsResourcesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX {acIPMediaChannelsResourcesIndex}
::= {acIPMediaChannelsResourcesTable 1}
-- ****************************************
-- acIPMediaChannelsResources TABLE
-- ****************************************
AcIPMediaChannelsResourcesEntry ::= SEQUENCE {
acIPMediaChannelsResourcesIndex Unsigned32,
acIPMediaChannelsResourcesRowStatus RowStatus,
acIPMediaChannelsResourcesAction INTEGER,
acIPMediaChannelsResourcesActionRes INTEGER,
acIPMediaChannelsResourcesModuleID Unsigned32,
acIPMediaChannelsResourcesDSPChannelsReserved Unsigned32
}
acIPMediaChannelsResourcesIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index Field for line. Internal parameter.
AC INI-Param: IPMediaChannels_Index"
::= {acIPMediaChannelsResourcesEntry 1}
acIPMediaChannelsResourcesRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"ROWSTATUS field for line. Internal parameter.
AC INI-Param: N/A"
::= {acIPMediaChannelsResourcesEntry 2}
acIPMediaChannelsResourcesAction OBJECT-TYPE
SYNTAX INTEGER {
none(0)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Mangement Field for ACTIONS. Internal parameter.
AC INI-Param: N/A"
::= {acIPMediaChannelsResourcesEntry 3}
acIPMediaChannelsResourcesActionRes OBJECT-TYPE
SYNTAX INTEGER {
succeeded(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Mangement Field for ACTIONS RESULT. Internal parameter.
AC INI-Param: N/A"
::= {acIPMediaChannelsResourcesEntry 4}
acIPMediaChannelsResourcesModuleID OBJECT-TYPE
SYNTAX Unsigned32 (0..6)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Refers to M1K board only, module at which slot.
Access: Offline.
AC INI-Param: IPMediaChannels_ModuleID"
::= {acIPMediaChannelsResourcesEntry 5}
acIPMediaChannelsResourcesDSPChannelsReserved OBJECT-TYPE
SYNTAX Unsigned32 (0..10000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"How many DSP channels reserve for IPMedia channels.
Access: Offline.
AC INI-Param: IPMediaChannels_DSPChannelsReserved"
::= {acIPMediaChannelsResourcesEntry 6}
acAcousticEchoSuppressor OBJECT IDENTIFIER ::= {acMediaConfiguration 14}
acAcousticEchoSuppressorEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0)
,
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable support of network echo suppressor on board level. Reduces
board resource capacity.
Access: Offline.
AC INI-Param: ACOUSTICECHOSUPPRESSORSUPPORT"
::= {acAcousticEchoSuppressor 1}
acAcousticEchoSuppressorEchoCancellerType OBJECT-TYPE
SYNTAX INTEGER {
lineEchoCanceller(0)
,
acousticEchoSuppressorNetwork(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Echo Canceller type. Line echo canceller for TDM Side or acoustic
echo suppressor on network side.
Access: Online.
AC INI-Param: ECHOCANCELLERTYPE"
::= {acAcousticEchoSuppressor 2}
acAcousticEchoSuppressorAttenuationIntensity OBJECT-TYPE
SYNTAX Unsigned32 (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Acoustic echo suppressor attenuation intensity. intensity of
attenuation on signals identified as echo.
Access: Online.
AC INI-Param: ACOUSTICECHOSUPPATTENUATIONINTENSITY"
::= {acAcousticEchoSuppressor 3}
acAcousticEchoSuppressorMaxERLThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Acoustic echo suppressor max ERL threshold in DB. Max ratio
between signal level and retruned echo from phone.
Access: Online.
AC INI-Param: ACOUSTICECHOSUPPMAXERLTHRESHOLD"
::= {acAcousticEchoSuppressor 4}
acAcousticEchoSuppressorMinReferenceDelay OBJECT-TYPE
SYNTAX Unsigned32 (0..40)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Acoustic echo suppressor MIN reference delay in mSec. The reference
delay in the network helps echo suppression algorithm
to identify echo signals. The entered value will be multiplied
by 10.
Access: Online.
AC INI-Param: ACOUSTICECHOSUPPMINREFDELAYx10MS"
::= {acAcousticEchoSuppressor 5}
acAcousticEchoSuppressorMaxReferenceDelay OBJECT-TYPE
SYNTAX Unsigned32 (0..40)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Acoustic echo suppressor MAX reference delay. The reference
delay in the network helps echo suppression algorithm to identify
echo signals. The entered value will be multiplied by
10.
Access: Online.
AC INI-Param: ACOUSTICECHOSUPPMAXREFDELAYx10MS"
::= {acAcousticEchoSuppressor 6}
END
Reference in New Issue View Git Blame Copy Permalink