3472 lines
93 KiB
Plaintext
3472 lines
93 KiB
Plaintext
FOUNDRY-SN-OSPF-GROUP-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE,Counter32, Gauge32, IpAddress,Integer32
|
|
FROM SNMPv2-SMI
|
|
router
|
|
FROM FOUNDRY-SN-ROOT-MIB
|
|
TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC;
|
|
|
|
snOspf MODULE-IDENTITY
|
|
LAST-UPDATED "201006020000Z" -- 04 June 2010
|
|
ORGANIZATION "Brocade Communications Systems, Inc."
|
|
CONTACT-INFO
|
|
"Technical Support Center
|
|
130 Holger Way,
|
|
San Jose, CA 95134
|
|
Email: ipsupport@brocade.com
|
|
Phone: 1-800-752-8061
|
|
URL: www.brocade.com"
|
|
DESCRIPTION
|
|
"Copyright 1996-2010 Brocade Communications Systems, Inc.
|
|
All rights reserved.
|
|
This Brocade Communications Systems SNMP Management Information Base Specification
|
|
embodies Brocade Communications Systems' confidential and proprietary
|
|
intellectual property. Brocade Communications Systems retains all
|
|
title and ownership in the Specification, including any revisions.
|
|
|
|
This Specification is supplied AS IS, and Brocade Communications Systems makes
|
|
no warranty, either express or implied, as to the use,
|
|
operation, condition, or performance of the specification, and any unintended
|
|
consequence it may on the user environment."
|
|
|
|
REVISION "201006020000Z" -- 04 June 2010
|
|
DESCRIPTION
|
|
"Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields."
|
|
|
|
REVISION "200909300000Z" -- September 30, 2009
|
|
DESCRIPTION
|
|
"convert from SMIv1 to SMIv2"
|
|
::= {router 4}
|
|
|
|
-- Textual Conventions
|
|
|
|
AreaID::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The Area ID, in OSPF, has the same format as an IP Address,
|
|
but has the function of defining a summarization point for
|
|
Link State Advertisements
|
|
"
|
|
SYNTAX IpAddress
|
|
|
|
RouterID::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The Router ID, in OSPF, has the same format as an IP Address,
|
|
but identifies the router independent of its IP Address.
|
|
"
|
|
SYNTAX IpAddress
|
|
|
|
Metric::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The OSPF Metric is defined as an unsigned value in the range
|
|
0..'FFFF'h
|
|
"
|
|
SYNTAX INTEGER (0..65535)
|
|
|
|
BigMetric::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
0..'FFFFFF'h
|
|
"
|
|
SYNTAX INTEGER (0..16777215)
|
|
|
|
TruthVal::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Boolean Values
|
|
"
|
|
SYNTAX INTEGER { false (0), true (1) }
|
|
|
|
RtrStatus::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
RtrStatus Values
|
|
"
|
|
SYNTAX INTEGER { disabled (0), enabled (1) }
|
|
|
|
-- Time Durations measured in seconds
|
|
|
|
PositiveInteger::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
0..'7FFFFFFF'h
|
|
"
|
|
SYNTAX INTEGER (0..2147483647)
|
|
|
|
HelloRange::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
1..'FFFF'h
|
|
"
|
|
SYNTAX INTEGER (1..65535)
|
|
|
|
UpToMaxAge::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
"
|
|
SYNTAX INTEGER (0..3600)
|
|
|
|
DesignatedRouterPriority::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The range of ifIndex, i.e. (1..ifNumber)
|
|
Potential Priorities for the Designated Router Election
|
|
"
|
|
SYNTAX INTEGER (0..255)
|
|
|
|
|
|
TOSType::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Type of Service is defined as a mapping to the IP Type of
|
|
Service Flags as defined in the Router Requirements
|
|
Document:
|
|
|
|
Type of Service is defined as a mapping to the IP Type of
|
|
Service Flags as defined in the IP Forwarding Table MIB
|
|
|
|
+-----+-----+-----+-----+-----+-----+-----+-----+
|
|
| | | |
|
|
| PRECEDENCE | TYPE OF SERVICE | 0 |
|
|
| | | |
|
|
+-----+-----+-----+-----+-----+-----+-----+-----+
|
|
|
|
IP TOS IP TOS
|
|
Field Policy Field Policy
|
|
|
|
Contents Code Contents Code
|
|
0 0 0 0 ==> 0 0 0 0 1 ==> 2
|
|
0 0 1 0 ==> 4 0 0 1 1 ==> 6
|
|
0 1 0 0 ==> 8 0 1 0 1 ==> 10
|
|
0 1 1 0 ==> 12 0 1 1 1 ==> 14
|
|
1 0 0 0 ==> 16 1 0 0 1 ==> 18
|
|
1 0 1 0 ==> 20 1 0 1 1 ==> 22
|
|
1 1 0 0 ==> 24 1 1 0 1 ==> 26
|
|
1 1 1 0 ==> 28 1 1 1 1 ==> 30
|
|
|
|
The remaining values are left for future definition.
|
|
"
|
|
SYNTAX INTEGER (0..30)
|
|
|
|
|
|
-- Groups
|
|
|
|
snOspfGen OBJECT IDENTIFIER ::= { snOspf 1 }
|
|
snOspfArea OBJECT IDENTIFIER ::= { snOspf 2 }
|
|
snOspfAddrRange OBJECT IDENTIFIER ::= { snOspf 3 }
|
|
snOspfIntf OBJECT IDENTIFIER ::= { snOspf 4 }
|
|
snOspfVirtIf OBJECT IDENTIFIER ::= { snOspf 5 }
|
|
snOspfRedis OBJECT IDENTIFIER ::= { snOspf 6 }
|
|
snOspfNbr OBJECT IDENTIFIER ::= { snOspf 7 }
|
|
snOspfVirtNbr OBJECT IDENTIFIER ::= { snOspf 8 }
|
|
snOspfLsdb OBJECT IDENTIFIER ::= { snOspf 9 }
|
|
snOspfExtLsdb OBJECT IDENTIFIER ::= { snOspf 10 }
|
|
snOspfAreaStatus OBJECT IDENTIFIER ::= { snOspf 11 }
|
|
snOspfIfStatus OBJECT IDENTIFIER ::= { snOspf 12 }
|
|
snOspfVirtIfStatus OBJECT IDENTIFIER ::= { snOspf 13 }
|
|
snOspfRoutingInfo OBJECT IDENTIFIER ::= { snOspf 14 }
|
|
snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 }
|
|
|
|
|
|
|
|
-- Section 1: OSPF General Variables
|
|
|
|
-- These parameters apply globally to the Router's
|
|
-- OSPF Process.
|
|
|
|
|
|
snOspfRouterId OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying the router in
|
|
the Autonomous System.
|
|
|
|
By convention, to ensure uniqueness, this should
|
|
default to the value of one of the router's IP
|
|
interface addresses."
|
|
REFERENCE
|
|
"OSPF Version 2, C.1 Global parameters"
|
|
::= { snOspfGen 1 }
|
|
|
|
snOspfAdminStat OBJECT-TYPE
|
|
SYNTAX RtrStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative status of OSPF in the router. The
|
|
value 'enabled' denotes that the OSPF Process is active
|
|
on at least one interface; 'disabled' disables it on
|
|
all interfaces."
|
|
::= { snOspfGen 2 }
|
|
|
|
snOspfASBdrRtrStatus OBJECT-TYPE
|
|
SYNTAX TruthVal
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A flag to note whether this router is an Autonomous
|
|
System border router."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 3.3 Classification of routers"
|
|
::= { snOspfGen 3 }
|
|
|
|
|
|
snOspfRedisMode OBJECT-TYPE
|
|
SYNTAX RtrStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Redistribution status of OSPF in the router. The
|
|
value 'enabled' denotes that the OSPF Redistribution is
|
|
active; 'disabled' disables it on the router."
|
|
::= { snOspfGen 4 }
|
|
|
|
|
|
snOspfDefaultOspfMetricValue OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric of using a default OSPF Metric value on this route."
|
|
::= { snOspfGen 5 }
|
|
|
|
snOspfExternLSACount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of external (LS type 5) link-state
|
|
advertisements in the link-state database."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix A.4.5 AS external link
|
|
advertisements"
|
|
::= { snOspfGen 6 }
|
|
|
|
snOspfExternLSACksumSum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32-bit unsigned sum of the LS checksums of the
|
|
external link-state advertisements contained in the
|
|
link-state database. This sum can be used to determine
|
|
if there has been a change in a router's link state
|
|
database, and to compare the link-state database of two
|
|
routers."
|
|
::= { snOspfGen 7 }
|
|
|
|
snOspfOriginateNewLSAs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of new link-state advertisements that have
|
|
been originated. This number is incremented each time
|
|
the router originates a new LSA."
|
|
::= { snOspfGen 8 }
|
|
|
|
snOspfRxNewLSAs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of link-state advertisements received
|
|
determined to be new instantiations. This number does
|
|
not include newer instantiations of self-originated
|
|
link-state advertisements."
|
|
::= { snOspfGen 9 }
|
|
|
|
snOspfOspfRedisMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
type1(1),
|
|
type2(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"type1: For External Type 1 (comparable value) the
|
|
intra-area and inter-area routes,
|
|
it is an OSPF metric plus the External Metric.
|
|
type2: For external Type 2 (non-comparable value) routes,
|
|
it is the external metric."
|
|
::= { snOspfGen 10 }
|
|
|
|
snOspfExtLsdbLimit OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of non-default AS-
|
|
external-LSAs entries that can be stored in the
|
|
link-state database. If the value is -1, then
|
|
there is no limit.
|
|
|
|
|
|
When the number of non-default AS-external-LSAs
|
|
in a router's link-state database reaches
|
|
ospfExtLsdbLimit, the router enters Overflow-
|
|
State. The router never holds more than
|
|
ospfExtLsdbLimit non-default AS-external-LSAs
|
|
in its database. OspfExtLsdbLimit MUST be set
|
|
identically in all routers attached to the OSPF
|
|
backbone and/or any regular OSPF area. (i.e.,
|
|
OSPF stub areas and NSSAs are excluded)."
|
|
::= { snOspfGen 11 }
|
|
|
|
|
|
snOspfExitOverflowInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (0..86400)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds that, after entering
|
|
OverflowState, a router will attempt to leave
|
|
OverflowState. This allows the router to again
|
|
originate non-default AS-external-LSAs. When
|
|
set to 0, the router will not leave Overflow-
|
|
State until restarted."
|
|
::= { snOspfGen 12 }
|
|
|
|
snOspfRfc1583Compatibility OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This allows the ospf routing either compatible with
|
|
RFC1583 or RFC2178.
|
|
enabled(1)........activate RFC1583 compatibility rather than RFC2178
|
|
disabled(0).......disable RFC1583 compatibility and compatible to RFC2178."
|
|
::= { snOspfGen 13 }
|
|
|
|
snOspfRouterIdFormat OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
integer(0),
|
|
ipAddress(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to specify whether
|
|
RouterId is represented as IP Address or
|
|
an Integer. The values
|
|
that can be written are:
|
|
integer(0).....as an integer.
|
|
ipAddress(1)...as IP Address."
|
|
::= { snOspfGen 14 }
|
|
|
|
snOspfDistance OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"OSPF Adminitrative distance. 0 if distance is not set."
|
|
::= { snOspfGen 15 }
|
|
|
|
snOspfDistanceIntra OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OSPF Adminitrative distance - Intra Area."
|
|
::= { snOspfGen 16 }
|
|
|
|
snOspfDistanceInter OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OSPF Adminitrative distance - Inter Area."
|
|
::= { snOspfGen 17 }
|
|
|
|
snOspfDistanceExternal OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OSPF Adminitrative distance - External."
|
|
::= { snOspfGen 18 }
|
|
|
|
-- Section 2: OSPF Area Table
|
|
|
|
-- The OSPF Area Data Structure contains information
|
|
-- regarding the various areas. The interfaces and
|
|
-- virtual links are configured as part of these areas.
|
|
-- Area 0.0.0.0, by definition, is the Backbone Area
|
|
|
|
snOspfAreaTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnOspfAreaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information describing the configured parameters and
|
|
cumulative statistics of the router's attached areas."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 6 The Area Data Structure"
|
|
::= { snOspfArea 1 }
|
|
|
|
snOspfAreaEntry OBJECT-TYPE
|
|
SYNTAX SnOspfAreaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information describing the configured parameters and
|
|
cumulative statistics of one of the router's attached
|
|
areas."
|
|
INDEX { snOspfAreaId }
|
|
::= { snOspfAreaTable 1 }
|
|
|
|
SnOspfAreaEntry ::=
|
|
SEQUENCE {
|
|
snOspfAreaId
|
|
AreaID,
|
|
snOspfImportASExtern
|
|
Integer32,
|
|
snOspfStubMetric
|
|
BigMetric,
|
|
snOspfAreaRowStatus
|
|
INTEGER,
|
|
snOspfAreaIdFormat
|
|
INTEGER
|
|
}
|
|
|
|
snOspfAreaId OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying an area. Area
|
|
ID 0.0.0.0 is used for the OSPF backbone."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { snOspfAreaEntry 1 }
|
|
|
|
snOspfImportASExtern OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The area's support for importing AS external link-
|
|
state advertisements.
|
|
0: Stub Area Type
|
|
1: Normal Area Type
|
|
2: NSSA Area Type"
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
DEFVAL { 1}
|
|
::= { snOspfAreaEntry 2 }
|
|
|
|
|
|
snOspfStubMetric OBJECT-TYPE
|
|
SYNTAX BigMetric
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric value applied at the default type of
|
|
service(ospfMetric). By default, this equals the
|
|
least metric at the type of service among the
|
|
interfaces to other areas. This Object exist if
|
|
only if the value of snOspfAreaSummary is
|
|
snOspfAreaSummary(2); Otherwise, an SNMP_GET/GET_NEXT
|
|
attempt of this Object will return NO_SUCH_NAME."
|
|
::= { snOspfAreaEntry 3 }
|
|
|
|
|
|
snOspfAreaRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
invalid(1),
|
|
valid(2),
|
|
delete(3),
|
|
create(4),
|
|
modify(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create and
|
|
delete row in the table and control
|
|
if they are used. The values
|
|
that can be written are:
|
|
delete(3)...deletes the row
|
|
create(4)...creates a new row
|
|
modify(5)...modifies an exsisting row
|
|
|
|
If the row exists, then a SET with
|
|
value of create(4) returns error
|
|
'badValue'. Deleted rows go away
|
|
immediately. The following values
|
|
can be returned on reads:
|
|
noSuch(0)...no such row
|
|
invalid(1)...Setting it to 'invalid' has the effect of
|
|
rendering it inoperative..
|
|
valid(2)....the row exists and is valid"
|
|
::= { snOspfAreaEntry 4 }
|
|
|
|
snOspfAreaIdFormat OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
integer(0),
|
|
ipAddress(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to specify whether
|
|
AreaId is represented as IP Address or
|
|
an Integer. The values
|
|
that can be written are:
|
|
integer(0).....as an integer.
|
|
ipAddress(1)...as IP Address."
|
|
::= { snOspfAreaEntry 5 }
|
|
|
|
|
|
-- Section 3: Area Range Table (Address Range Table)
|
|
|
|
-- The Address Range Table acts as an adjunct to the Area
|
|
-- Table; It describes those Address Range Summaries that
|
|
-- are configured to be propagated from an Area to reduce
|
|
-- the amount of information about it which is known beyond
|
|
-- its borders.
|
|
|
|
|
|
|
|
snOspfAreaRangeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnOspfAreaRangeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A range if IP addresses specified by an IP address/IP
|
|
network mask pair. For example, class B address range
|
|
of X.X.X.X with a network mask of 255.255.0.0 includes
|
|
all IP addresses from X.X.0.0 to X.X.255.255"
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { snOspfAddrRange 1 }
|
|
|
|
snOspfAreaRangeEntry OBJECT-TYPE
|
|
SYNTAX SnOspfAreaRangeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A range if IP addresses specified by an IP address/IP
|
|
network mask pair. For example, class B address range
|
|
of X.X.X.X with a network mask of 255.255.0.0 includes
|
|
all IP addresses from X.X.0.0 to X.X.255.255"
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
INDEX { snOspfAreaRangeAreaID, snOspfAreaRangeNet }
|
|
::= { snOspfAreaRangeTable 1 }
|
|
|
|
SnOspfAreaRangeEntry ::=
|
|
SEQUENCE {
|
|
snOspfAreaRangeAreaID
|
|
AreaID,
|
|
snOspfAreaRangeNet
|
|
IpAddress,
|
|
snOspfAreaRangeMask
|
|
IpAddress,
|
|
snOspfAreaRangeRowStatus
|
|
INTEGER,
|
|
snOspfAreaRangeAreaIdFormat
|
|
INTEGER
|
|
}
|
|
|
|
snOspfAreaRangeAreaID OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Area the Address Range is to be found within."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { snOspfAreaRangeEntry 1 }
|
|
|
|
snOspfAreaRangeNet OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the Net or Subnet indicated by the
|
|
range."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { snOspfAreaRangeEntry 2 }
|
|
|
|
snOspfAreaRangeMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Subnet Mask that pertains to the Net or Subnet."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { snOspfAreaRangeEntry 3 }
|
|
|
|
|
|
snOspfAreaRangeRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
invalid(1),
|
|
valid(2),
|
|
delete(3),
|
|
create(4),
|
|
modify(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create and
|
|
delete row in the table and control
|
|
if they are used. The values
|
|
that can be written are:
|
|
delete(3)...deletes the row
|
|
create(4)...creates a new row
|
|
modify(5)...modifies an exsisting row
|
|
|
|
If the row exists, then a SET with
|
|
value of create(4) returns error
|
|
'badValue'. Deleted rows go away
|
|
immediately. The following values
|
|
can be returned on reads:
|
|
noSuch(0)...no such row
|
|
invalid(1)...Setting it to 'invalid' has the effect of
|
|
rendering it inoperative..
|
|
valid(2)....the row exists and is valid"
|
|
::= { snOspfAreaRangeEntry 4 }
|
|
|
|
snOspfAreaRangeAreaIdFormat OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
integer(0),
|
|
ipAddress(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to specify whether
|
|
AreaId is represented as IP Address or
|
|
an Integer. The values
|
|
that can be written are:
|
|
integer(0).....as an integer.
|
|
ipAddress(1)...as IP Address."
|
|
::= { snOspfAreaRangeEntry 5 }
|
|
|
|
|
|
|
|
|
|
|
|
-- Section 4: OSPF Interface Configuration Table
|
|
|
|
-- The OSPF Interface Table augments the ifTable with OSPF
|
|
-- specific information.
|
|
-- snOspfIfTable was replaced by snOspfIf2Table. The snOspfIfPort
|
|
-- was not an ifIndex, and the snOspfIf2Port is an ifIndex.
|
|
|
|
|
|
snOspfIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnOspfIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The OSPF Interface Table describes the interfaces from
|
|
the viewpoint of OSPF."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.3 Router interface
|
|
parameters"
|
|
::= { snOspfIntf 1 }
|
|
|
|
snOspfIfEntry OBJECT-TYPE
|
|
SYNTAX SnOspfIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The OSPF Interface Entry describes one interface from
|
|
the viewpoint of OSPF."
|
|
INDEX { snOspfIfPort }
|
|
::= { snOspfIfTable 1 }
|
|
|
|
SnOspfIfEntry ::=
|
|
SEQUENCE {
|
|
snOspfIfPort
|
|
Integer32,
|
|
snOspfIfAreaId
|
|
AreaID,
|
|
snOspfIfAdminStat
|
|
RtrStatus,
|
|
snOspfIfRtrPriority
|
|
DesignatedRouterPriority,
|
|
snOspfIfTransitDelay
|
|
UpToMaxAge,
|
|
snOspfIfRetransInterval
|
|
UpToMaxAge,
|
|
snOspfIfHelloInterval
|
|
HelloRange,
|
|
snOspfIfRtrDeadInterval
|
|
PositiveInteger,
|
|
snOspfIfAuthType
|
|
INTEGER,
|
|
snOspfIfAuthKey
|
|
OCTET STRING,
|
|
snOspfIfMetricValue
|
|
INTEGER,
|
|
snOspfIfRowStatus
|
|
INTEGER,
|
|
snOspfIfMd5AuthKeyId
|
|
INTEGER,
|
|
snOspfIfMd5AuthKey
|
|
OCTET STRING,
|
|
snOspfIfMd5ActivationWaitTime
|
|
INTEGER,
|
|
snOspfIfAreaIdFormat
|
|
INTEGER,
|
|
snOspfIfPassiveMode
|
|
INTEGER,
|
|
snOspfIfDatabaseFilterAllOut
|
|
INTEGER,
|
|
snOspfIfMtuIgnore
|
|
INTEGER,
|
|
snOspfIfNetworkP2mp
|
|
INTEGER
|
|
}
|
|
|
|
|
|
snOspfIfPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The physical router port of this OSPF interface."
|
|
::= { snOspfIfEntry 1 }
|
|
|
|
|
|
snOspfIfAreaId OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying the area to
|
|
which the interface connects. Area ID 0.0.0.0 is used
|
|
for the OSPF backbone."
|
|
DEFVAL { '00000000'h } -- 0.0.0.0
|
|
::= { snOspfIfEntry 2 }
|
|
|
|
|
|
snOspfIfAdminStat OBJECT-TYPE
|
|
SYNTAX RtrStatus
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The OSPF interface's administrative status. The value
|
|
'enabled' denotes that neighbor relationships may be
|
|
formed on the interface, and the interface will be
|
|
advertised as an internal route to some area. The
|
|
value 'disabled' denotes that the interface is external
|
|
to OSPF."
|
|
DEFVAL { enabled }
|
|
::= { snOspfIfEntry 3 }
|
|
|
|
snOspfIfRtrPriority OBJECT-TYPE
|
|
SYNTAX DesignatedRouterPriority
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The priority of this interface. Used in multi-access
|
|
networks, this field is used in the designated router
|
|
election algorithm. The value 0 signifies that the
|
|
router is not eligible to become the designated router
|
|
on this particular network. In the event of a tie in
|
|
this value, routers will use their router id as a tie
|
|
breaker."
|
|
DEFVAL { 1 }
|
|
::= { snOspfIfEntry 4 }
|
|
|
|
snOspfIfTransitDelay OBJECT-TYPE
|
|
SYNTAX UpToMaxAge
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The estimated number of seconds it takes to transmit a
|
|
link- state update packet over this interface."
|
|
DEFVAL { 1 }
|
|
::= { snOspfIfEntry 5 }
|
|
|
|
snOspfIfRetransInterval OBJECT-TYPE
|
|
SYNTAX UpToMaxAge
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of seconds between link-state advertisement
|
|
retransmissions, for adjacencies belonging to this
|
|
interface. This value is also used when retransmitting
|
|
database description and link-state request packets."
|
|
DEFVAL { 5 }
|
|
::= { snOspfIfEntry 6 }
|
|
|
|
snOspfIfHelloInterval OBJECT-TYPE
|
|
SYNTAX HelloRange
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The length of time, in seconds, between the Hello
|
|
packets that the router sends on the interface. This
|
|
value must be the same for all routers attached to a
|
|
common network."
|
|
DEFVAL { 10 }
|
|
::= { snOspfIfEntry 7 }
|
|
|
|
snOspfIfRtrDeadInterval OBJECT-TYPE
|
|
SYNTAX PositiveInteger
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of seconds that a router's Hello packets
|
|
have not been seen before it's neighbors declare the
|
|
router down. This should be some multiple of the Hello
|
|
interval. This value must be the same for all routers
|
|
attached to a common network."
|
|
DEFVAL { 40 }
|
|
::= { snOspfIfEntry 8 }
|
|
|
|
|
|
snOspfIfAuthType OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
-- none (0),
|
|
-- simplePassword (1)
|
|
-- md5 (2)
|
|
-- reserved for specification by IANA (> 2)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The authentication type specified for an interface.
|
|
Additional authentication types may be assigned locally
|
|
on a per interface basis."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix E Authentication"
|
|
DEFVAL { 0 } -- no authentication, by default
|
|
::= { snOspfIfEntry 9 }
|
|
|
|
|
|
snOspfIfAuthKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..8))
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The Authentication Key. If the Area's Authorization
|
|
Type is simplePassword, and the key length is shorter
|
|
than 8 octets, the agent will left adjust and zero fill
|
|
to 8 octets.
|
|
|
|
When read, snOspfIfAuthKey always returns an Octet String
|
|
of length zero."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 9 The Interface Data
|
|
Structure"
|
|
DEFVAL { '0000000000000000'h } -- 0.0.0.0.0.0.0.0
|
|
::= { snOspfIfEntry 10 }
|
|
|
|
|
|
snOspfIfMetricValue OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The metric of using this type of service on
|
|
this interface. The default value of the TOS 0
|
|
Metric is 10^8 / ifSpeed."
|
|
::= { snOspfIfEntry 11 }
|
|
|
|
snOspfIfRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
invalid(1),
|
|
valid(2),
|
|
delete(3),
|
|
create(4),
|
|
modify(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object is used to create and
|
|
delete row in the table and control
|
|
if they are used. The values
|
|
that can be written are:
|
|
delete(3)...deletes the row
|
|
create(4)...creates a new row
|
|
modify(5)...modifies an exsisting row
|
|
|
|
If the row exists, then a SET with
|
|
value of create(4) returns error
|
|
'badValue'. Deleted rows go away
|
|
immediately. The following values
|
|
can be returned on reads:
|
|
noSuch(0)...no such row
|
|
invalid(1)...Setting it to 'invalid' has the effect of
|
|
rendering it inoperative..
|
|
valid(2)....the row exists and is valid"
|
|
::= { snOspfIfEntry 12 }
|
|
|
|
snOspfIfMd5AuthKeyId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The md5 authentication key ID. If the snOspfVirtIfAuthType
|
|
is set to md5, the value of snOspfIfMd5AuthKeyId must be
|
|
(1 to 255). This field identifies the algorithm and secret
|
|
key used to create the message digest appended to the OSPF
|
|
packet. Key Identifiers are unique per-interface
|
|
(or equivalently, per-subnet)."
|
|
::= { snOspfIfEntry 13 }
|
|
|
|
|
|
snOspfIfMd5AuthKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..16))
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The MD5 Authentication Key. If the Area's Authorization
|
|
Type is md5, and the key length is shorter than 16 octets,
|
|
the agent will left adjust and zero fill to 16 octets.
|
|
When read, snOspfIfMd5AuthKey always returns an Octet String
|
|
of length zero."
|
|
::= { snOspfIfEntry 14 }
|
|
|
|
|
|
snOspfIfMd5ActivationWaitTime OBJECT-TYPE
|
|
SYNTAX INTEGER (0..14400)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The md5 authentication key activation wait time is specified in second
|
|
and the maximum wait time is 14400 seconds (4 hours)."
|
|
::= { snOspfIfEntry 15 }
|
|
|
|
snOspfIfAreaIdFormat OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
integer(0),
|
|
ipAddress(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object is used to specify whether
|
|
AreaId is represented as IP Address or
|
|
an Integer. The values
|
|
that can be written are:
|
|
integer(0).....as an integer.
|
|
ipAddress(1)...as IP Address."
|
|
::= { snOspfIfEntry 16 }
|
|
|
|
snOspfIfPassiveMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object control the passive mode of this interface."
|
|
::= { snOspfIfEntry 17 }
|
|
|
|
snOspfIfDatabaseFilterAllOut OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object control the filtering of outgoing OSPF LSA on this interface."
|
|
::= { snOspfIfEntry 18 }
|
|
|
|
snOspfIfMtuIgnore OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object control MTU detection mode of this interface."
|
|
::= { snOspfIfEntry 19 }
|
|
|
|
snOspfIfNetworkP2mp OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object enable/disable P2MP mode of this interface."
|
|
::= { snOspfIfEntry 20 }
|
|
|
|
|
|
-- Section 4: OSPF Interface Configuration Table
|
|
|
|
-- The OSPF Interface Table augments the ifTable with OSPF
|
|
-- specific information.
|
|
-- snOspfIf2Table replaced snOspfIfTable. The snOspfIf2Port
|
|
-- is an ifIndex, and the snOspfIfPort is not an ifIndex.
|
|
|
|
|
|
snOspfIf2Table OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnOspfIf2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF Interface Table describes the interfaces from
|
|
the viewpoint of OSPF."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.3 Router interface
|
|
parameters"
|
|
::= { snOspfIntf 2 }
|
|
|
|
snOspfIf2Entry OBJECT-TYPE
|
|
SYNTAX SnOspfIf2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF Interface Entry describes one interface from
|
|
the viewpoint of OSPF."
|
|
INDEX { snOspfIf2Port }
|
|
::= { snOspfIf2Table 1 }
|
|
|
|
SnOspfIf2Entry ::=
|
|
SEQUENCE {
|
|
snOspfIf2Port
|
|
Integer32,
|
|
snOspfIf2AreaId
|
|
AreaID,
|
|
snOspfIf2AdminStat
|
|
RtrStatus,
|
|
snOspfIf2RtrPriority
|
|
DesignatedRouterPriority,
|
|
snOspfIf2TransitDelay
|
|
UpToMaxAge,
|
|
snOspfIf2RetransInterval
|
|
UpToMaxAge,
|
|
snOspfIf2HelloInterval
|
|
HelloRange,
|
|
snOspfIf2RtrDeadInterval
|
|
PositiveInteger,
|
|
snOspfIf2AuthType
|
|
INTEGER,
|
|
snOspfIf2AuthKey
|
|
OCTET STRING,
|
|
snOspfIf2MetricValue
|
|
INTEGER,
|
|
snOspfIf2RowStatus
|
|
INTEGER,
|
|
snOspfIf2Md5AuthKeyId
|
|
INTEGER,
|
|
snOspfIf2Md5AuthKey
|
|
OCTET STRING,
|
|
snOspfIf2Md5ActivationWaitTime
|
|
INTEGER,
|
|
snOspfIf2AreaIdFormat
|
|
INTEGER,
|
|
snOspfIf2PassiveMode
|
|
INTEGER,
|
|
snOspfIf2DatabaseFilterAllOut
|
|
INTEGER,
|
|
snOspfIf2MtuIgnore
|
|
INTEGER,
|
|
snOspfIf2NetworkP2mp
|
|
INTEGER,
|
|
snOspfIf2NetworkP2pt
|
|
INTEGER,
|
|
snOspfIf2NetworkNonBroadcast
|
|
INTEGER
|
|
}
|
|
|
|
|
|
snOspfIf2Port OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The physical router port of this OSPF interface."
|
|
::= { snOspfIf2Entry 1 }
|
|
|
|
|
|
snOspfIf2AreaId OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying the area to
|
|
which the interface connects. Area ID 0.0.0.0 is used
|
|
for the OSPF backbone."
|
|
DEFVAL { '00000000'h } -- 0.0.0.0
|
|
::= { snOspfIf2Entry 2 }
|
|
|
|
|
|
snOspfIf2AdminStat OBJECT-TYPE
|
|
SYNTAX RtrStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF interface's administrative status. The value
|
|
'enabled' denotes that neighbor relationships may be
|
|
formed on the interface, and the interface will be
|
|
advertised as an internal route to some area. The
|
|
value 'disabled' denotes that the interface is external
|
|
to OSPF."
|
|
DEFVAL { enabled }
|
|
::= { snOspfIf2Entry 3 }
|
|
|
|
snOspfIf2RtrPriority OBJECT-TYPE
|
|
SYNTAX DesignatedRouterPriority
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority of this interface. Used in multi-access
|
|
networks, this field is used in the designated router
|
|
election algorithm. The value 0 signifies that the
|
|
router is not eligible to become the designated router
|
|
on this particular network. In the event of a tie in
|
|
this value, routers will use their router id as a tie
|
|
breaker."
|
|
DEFVAL { 1 }
|
|
::= { snOspfIf2Entry 4 }
|
|
|
|
snOspfIf2TransitDelay OBJECT-TYPE
|
|
SYNTAX UpToMaxAge
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated number of seconds it takes to transmit a
|
|
link- state update packet over this interface."
|
|
DEFVAL { 1 }
|
|
::= { snOspfIf2Entry 5 }
|
|
|
|
snOspfIf2RetransInterval OBJECT-TYPE
|
|
SYNTAX UpToMaxAge
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds between link-state advertisement
|
|
retransmissions, for adjacencies belonging to this
|
|
interface. This value is also used when retransmitting
|
|
database description and link-state request packets."
|
|
DEFVAL { 5 }
|
|
::= { snOspfIf2Entry 6 }
|
|
|
|
snOspfIf2HelloInterval OBJECT-TYPE
|
|
SYNTAX HelloRange
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length of time, in seconds, between the Hello
|
|
packets that the router sends on the interface. This
|
|
value must be the same for all routers attached to a
|
|
common network."
|
|
DEFVAL { 10 }
|
|
::= { snOspfIf2Entry 7 }
|
|
|
|
snOspfIf2RtrDeadInterval OBJECT-TYPE
|
|
SYNTAX PositiveInteger
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds that a router's Hello packets
|
|
have not been seen before it's neighbors declare the
|
|
router down. This should be some multiple of the Hello
|
|
interval. This value must be the same for all routers
|
|
attached to a common network."
|
|
DEFVAL { 40 }
|
|
::= { snOspfIf2Entry 8 }
|
|
|
|
|
|
snOspfIf2AuthType OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
-- none (0),
|
|
-- simplePassword (1)
|
|
-- md5 (2)
|
|
-- reserved for specification by IANA (> 2)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The authentication type specified for an interface.
|
|
Additional authentication types may be assigned locally
|
|
on a per interface basis."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix E Authentication"
|
|
DEFVAL { 0 } -- no authentication, by default
|
|
::= { snOspfIf2Entry 9 }
|
|
|
|
|
|
snOspfIf2AuthKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..8))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Authentication Key. If the Area's Authorization
|
|
Type is simplePassword, and the key length is shorter
|
|
than 8 octets, the agent will left adjust and zero fill
|
|
to 8 octets.
|
|
|
|
When read, snOspfIf2AuthKey always returns an Octet String
|
|
of length zero."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 9 The Interface Data
|
|
Structure"
|
|
DEFVAL { '0000000000000000'h } -- 0.0.0.0.0.0.0.0
|
|
::= { snOspfIf2Entry 10 }
|
|
|
|
|
|
snOspfIf2MetricValue OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric of using this type of service on
|
|
this interface. The default value of the TOS 0
|
|
Metric is 10^8 / ifSpeed."
|
|
::= { snOspfIf2Entry 11 }
|
|
|
|
snOspfIf2RowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
invalid(1),
|
|
valid(2),
|
|
delete(3),
|
|
create(4),
|
|
modify(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create and
|
|
delete row in the table and control
|
|
if they are used. The values
|
|
that can be written are:
|
|
delete(3)...deletes the row
|
|
create(4)...creates a new row
|
|
modify(5)...modifies an exsisting row
|
|
|
|
If the row exists, then a SET with
|
|
value of create(4) returns error
|
|
'badValue'. Deleted rows go away
|
|
immediately. The following values
|
|
can be returned on reads:
|
|
noSuch(0)...no such row
|
|
invalid(1)...Setting it to 'invalid' has the effect of
|
|
rendering it inoperative..
|
|
valid(2)....the row exists and is valid"
|
|
::= { snOspfIf2Entry 12 }
|
|
|
|
snOspfIf2Md5AuthKeyId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The md5 authentication key ID. If the snOspfVirtIfAuthType
|
|
is set to md5, the value of snOspfIf2Md5AuthKeyId must be
|
|
(1 to 255). This field identifies the algorithm and secret
|
|
key used to create the message digest appended to the OSPF
|
|
packet. Key Identifiers are unique per-interface
|
|
(or equivalently, per-subnet)."
|
|
::= { snOspfIf2Entry 13 }
|
|
|
|
|
|
snOspfIf2Md5AuthKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MD5 Authentication Key. If the Area's Authorization
|
|
Type is md5, and the key length is shorter than 16 octets,
|
|
the agent will left adjust and zero fill to 16 octets.
|
|
When read, snOspfIf2Md5AuthKey always returns an Octet String
|
|
of length zero."
|
|
::= { snOspfIf2Entry 14 }
|
|
|
|
|
|
snOspfIf2Md5ActivationWaitTime OBJECT-TYPE
|
|
SYNTAX INTEGER (0..14400)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The md5 authentication key activation wait time is specified in second
|
|
and the maximum wait time is 14400 seconds (4 hours)."
|
|
::= { snOspfIf2Entry 15 }
|
|
|
|
snOspfIf2AreaIdFormat OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
integer(0),
|
|
ipAddress(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to specify whether
|
|
AreaId is represented as IP Address or
|
|
an Integer. The values
|
|
that can be written are:
|
|
integer(0).....as an integer.
|
|
ipAddress(1)...as IP Address."
|
|
::= { snOspfIf2Entry 16 }
|
|
|
|
snOspfIf2PassiveMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object control the passive mode of this interface."
|
|
::= { snOspfIf2Entry 17 }
|
|
|
|
snOspfIf2DatabaseFilterAllOut OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object control the filtering of outgoing OSPF LSA on this interface."
|
|
::= { snOspfIf2Entry 18 }
|
|
|
|
snOspfIf2MtuIgnore OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object control MTU detection mode of this interface."
|
|
::= { snOspfIf2Entry 19 }
|
|
|
|
snOspfIf2NetworkP2mp OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object enable/disable P2MP mode of this interface."
|
|
::= { snOspfIf2Entry 20 }
|
|
|
|
snOspfIf2NetworkP2pt OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object enable/disable Point-to-Point mode of this interface."
|
|
::= { snOspfIf2Entry 21 }
|
|
|
|
snOspfIf2NetworkNonBroadcast OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object enable/disable non broadcast mode of this interface."
|
|
::= { snOspfIf2Entry 22 }
|
|
|
|
|
|
-- Section 5: OSPF Virtual Interface Table
|
|
|
|
-- The Virtual Interface Table describes the virtual
|
|
-- links that the OSPF Process is configured to
|
|
-- carry on.
|
|
|
|
|
|
|
|
snOspfVirtIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnOspfVirtIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about this router's virtual interfaces."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.4 Virtual link parameters"
|
|
::= { snOspfVirtIf 1 }
|
|
|
|
snOspfVirtIfEntry OBJECT-TYPE
|
|
SYNTAX SnOspfVirtIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a single Virtual Interface."
|
|
INDEX { snOspfVirtIfAreaID, snOspfVirtIfNeighbor }
|
|
::= { snOspfVirtIfTable 1 }
|
|
|
|
SnOspfVirtIfEntry ::=
|
|
SEQUENCE {
|
|
snOspfVirtIfAreaID
|
|
AreaID,
|
|
snOspfVirtIfNeighbor
|
|
RouterID,
|
|
snOspfVirtIfTransitDelay
|
|
UpToMaxAge,
|
|
snOspfVirtIfRetransInterval
|
|
UpToMaxAge,
|
|
snOspfVirtIfHelloInterval
|
|
HelloRange,
|
|
snOspfVirtIfRtrDeadInterval
|
|
PositiveInteger,
|
|
snOspfVirtIfAuthType
|
|
INTEGER,
|
|
snOspfVirtIfAuthKey
|
|
OCTET STRING,
|
|
snOspfVirtIfRowStatus
|
|
INTEGER,
|
|
snOspfVirtIfMd5AuthKeyId
|
|
INTEGER,
|
|
snOspfVirtIfMd5AuthKey
|
|
OCTET STRING,
|
|
snOspfVirtIfMd5ActivationWaitTime
|
|
INTEGER,
|
|
snOspfVirtIfAreaIdFormat
|
|
INTEGER
|
|
}
|
|
|
|
snOspfVirtIfAreaID OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Transit Area that the Virtual Link traverses. By
|
|
definition, this is not 0.0.0.0"
|
|
::= { snOspfVirtIfEntry 1 }
|
|
|
|
snOspfVirtIfNeighbor OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Router ID of the Virtual Neighbor."
|
|
::= { snOspfVirtIfEntry 2 }
|
|
|
|
snOspfVirtIfTransitDelay OBJECT-TYPE
|
|
SYNTAX UpToMaxAge
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated number of seconds it takes to transmit a
|
|
link- state update packet over this interface."
|
|
DEFVAL { 1 }
|
|
::= { snOspfVirtIfEntry 3 }
|
|
|
|
snOspfVirtIfRetransInterval OBJECT-TYPE
|
|
SYNTAX UpToMaxAge
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds between link-state advertisement
|
|
retransmissions, for adjacencies belonging to this
|
|
interface. This value is also used when retransmitting
|
|
database description and link-state request packets.
|
|
This value should be well over the expected round-trip
|
|
time."
|
|
DEFVAL { 5 }
|
|
::= { snOspfVirtIfEntry 4 }
|
|
|
|
snOspfVirtIfHelloInterval OBJECT-TYPE
|
|
SYNTAX HelloRange
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length of time, in seconds, between the Hello
|
|
packets that the router sends on the interface. This
|
|
value must be the same for the virtual neighbor."
|
|
DEFVAL { 10 }
|
|
::= { snOspfVirtIfEntry 5 }
|
|
|
|
snOspfVirtIfRtrDeadInterval OBJECT-TYPE
|
|
SYNTAX PositiveInteger
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds that a router's Hello packets
|
|
have not been seen before it's neighbors declare the
|
|
router down. This should be some multiple of the Hello
|
|
interval. This value must be the same for the virtual
|
|
neighbor."
|
|
DEFVAL { 60 }
|
|
::= { snOspfVirtIfEntry 6 }
|
|
|
|
snOspfVirtIfAuthType OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
-- none (0),
|
|
-- simplePassword (1)
|
|
-- md5 (2)
|
|
-- reserved for specification by IANA (> 2)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The authentication type specified for an interface.
|
|
Additional authentication types may be assigned locally
|
|
on a per interface basis."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix E Authentication"
|
|
DEFVAL { 0 } -- no authentication, by default
|
|
::= { snOspfVirtIfEntry 7 }
|
|
|
|
snOspfVirtIfAuthKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..8))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If Authentication Type is simplePassword, the device
|
|
will left adjust and zero fill to 8 octets.
|
|
|
|
When read, snOspfVifAuthKey always returns a string of
|
|
length zero."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 9 The Interface Data
|
|
Structure"
|
|
DEFVAL { '0000000000000000'h } -- 0.0.0.0.0.0.0.0
|
|
::= { snOspfVirtIfEntry 8 }
|
|
|
|
snOspfVirtIfRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
invalid(1),
|
|
valid(2),
|
|
delete(3),
|
|
create(4),
|
|
modify(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create and
|
|
delete row in the table and control
|
|
if they are used. The values
|
|
that can be written are:
|
|
delete(3)...deletes the row
|
|
create(4)...creates a new row
|
|
modify(5)...modifies an exsisting row
|
|
|
|
If the row exists, then a SET with
|
|
value of create(4) returns error
|
|
'badValue'. Deleted rows go away
|
|
immediately. The following values
|
|
can be returned on reads:
|
|
noSuch(0)...no such row
|
|
invalid(1)...Setting it to 'invalid' has the effect of
|
|
rendering it inoperative..
|
|
valid(2)....the row exists and is valid"
|
|
::= { snOspfVirtIfEntry 9 }
|
|
|
|
snOspfVirtIfMd5AuthKeyId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The md5 authentication key ID. If the snOspfVirtIfAuthType
|
|
is set to md5, the value of snOspfVirtIfMd5AuthKeyId must be
|
|
(1 to 255). This field identifies the algorithm and secret
|
|
key used to create the message digest appended to the OSPF
|
|
packet. Key Identifiers are unique per-interface
|
|
(or equivalently, per-subnet)."
|
|
::= { snOspfVirtIfEntry 10 }
|
|
|
|
|
|
snOspfVirtIfMd5AuthKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MD5 Authentication Key. If the Area's Authorization
|
|
Type is md5, and the key length is shorter than 16 octets,
|
|
the agent will left adjust and zero fill to 16 octets.
|
|
|
|
When read, snOspfIfMd5AuthKey always returns an Octet String
|
|
of length zero."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 9 The Interface Data
|
|
Structure"
|
|
DEFVAL { '0000000000000000'h } -- 0.0.0.0.0.0.0.0
|
|
::= { snOspfVirtIfEntry 11 }
|
|
|
|
|
|
snOspfVirtIfMd5ActivationWaitTime OBJECT-TYPE
|
|
SYNTAX INTEGER (0..14400)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The md5 authentication key activation wait time is specified in second
|
|
and the maximum wait time is 14400 seconds (4 hours)."
|
|
::= { snOspfVirtIfEntry 12 }
|
|
|
|
|
|
snOspfVirtIfAreaIdFormat OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
integer(0),
|
|
ipAddress(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to specify whether
|
|
AreaId is represented as IP Address or
|
|
an Integer. The values
|
|
that can be written are:
|
|
integer(0).....as an integer.
|
|
ipAddress(1)...as IP Address."
|
|
::= { snOspfVirtIfEntry 13 }
|
|
|
|
|
|
|
|
|
|
|
|
|
|
-- Section 6: OSPF Redistribution of Routes Table
|
|
|
|
-- The OSPF Redistribution of Routes Table contains list of routes
|
|
-- that will be used to decide whether a particular RIP or Static
|
|
-- route is to be imported into OSPF domain as external type 2
|
|
-- route when parameter Import Route into OSPF is Enabled.
|
|
|
|
|
|
snOspfRedisTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnOspfRedisEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF Redistribution Table contains a list of routes
|
|
that could be imported into the OSPF domain."
|
|
::= { snOspfRedis 1 }
|
|
|
|
snOspfRedisEntry OBJECT-TYPE
|
|
SYNTAX SnOspfRedisEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF Redistribution Entry specifies a particular RIP
|
|
or Static route to be imported into the OSPF domain."
|
|
INDEX { snOspfRedisIndex }
|
|
::= { snOspfRedisTable 1 }
|
|
|
|
SnOspfRedisEntry ::=
|
|
SEQUENCE {
|
|
snOspfRedisIndex
|
|
INTEGER,
|
|
snOspfRedisIpAddress
|
|
IpAddress,
|
|
snOspfRedisMask
|
|
IpAddress,
|
|
snOspfRedisAction
|
|
INTEGER,
|
|
snOspfRedisProtocol
|
|
INTEGER,
|
|
snOspfRedisSetOspfMetric
|
|
INTEGER,
|
|
snOspfRedisOspfMetricValue
|
|
Metric,
|
|
snOspfRedisMatchRipMetric
|
|
INTEGER,
|
|
snOspfRedisRipMetricValue
|
|
INTEGER,
|
|
snOspfRedisRowStatus
|
|
INTEGER
|
|
}
|
|
|
|
|
|
snOspfRedisIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..64)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination IP address that associates with
|
|
this particular route."
|
|
::= { snOspfRedisEntry 1 }
|
|
|
|
snOspfRedisIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination IP address that associates with
|
|
this particular route."
|
|
::= { snOspfRedisEntry 2 }
|
|
|
|
snOspfRedisMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Subnet Mask that pertains to this route."
|
|
::= { snOspfRedisEntry 3 }
|
|
|
|
snOspfRedisAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noImport(0),
|
|
import(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The action to be taken if the route match this entry.
|
|
noImport(0): - the route is NOT imported into OSPF
|
|
Domain.
|
|
import(1): - the route is imported into OSPF
|
|
Domain as external type 2 route."
|
|
::= { snOspfRedisEntry 4 }
|
|
|
|
snOspfRedisProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
rip(1),
|
|
all(2),
|
|
static(3),
|
|
bgp(4),
|
|
connected(5),
|
|
isis(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The imported routes into OSPF domain is set in the following:
|
|
rip(1): - the RIP route.
|
|
all(2): - all protocol route.
|
|
static(3): - the static route.
|
|
bgp(4): - the BGP route.
|
|
connected(5): - the connected route.
|
|
isis(6): - the ISIS route."
|
|
::= { snOspfRedisEntry 5 }
|
|
|
|
snOspfRedisSetOspfMetric OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value indicates to which the route metric should match:
|
|
disabled(0): - the route metric does NOT match the
|
|
OSPF metric field.
|
|
enabled(1): - the route metric matches the OSPF
|
|
metric field."
|
|
::= { snOspfRedisEntry 6 }
|
|
|
|
|
|
snOspfRedisOspfMetricValue OBJECT-TYPE
|
|
SYNTAX Metric
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric of using OSPF Metric value on this route."
|
|
::= { snOspfRedisEntry 7 }
|
|
|
|
|
|
snOspfRedisMatchRipMetric OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value indicates to which the route metric should match:
|
|
disabled(0): - the route metric does NOT match the
|
|
RIP metric field.
|
|
enabled(1): - the route metric matches the RIP
|
|
metric field."
|
|
::= { snOspfRedisEntry 8 }
|
|
|
|
|
|
snOspfRedisRipMetricValue OBJECT-TYPE
|
|
SYNTAX INTEGER (1..15)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric of using RIP Metric value (1 to 15 hops) on this route."
|
|
::= { snOspfRedisEntry 9 }
|
|
|
|
|
|
snOspfRedisRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
invalid(1),
|
|
valid(2),
|
|
delete(3),
|
|
create(4),
|
|
modify(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create and
|
|
delete row in the table and control
|
|
if they are used. The values
|
|
that can be written are:
|
|
delete(3)...deletes the row
|
|
create(4)...creates a new row
|
|
modify(5)...modifies an exsisting row
|
|
|
|
If the row exists, then a SET with
|
|
value of create(4) returns error
|
|
'badValue'. Deleted rows go away
|
|
immediately. The following values
|
|
can be returned on reads:
|
|
noSuch(0)...no such row
|
|
invalid(1)...Setting it to 'invalid' has the effect of
|
|
rendering it inoperative..
|
|
valid(2)....the row exists and is valid"
|
|
::= { snOspfRedisEntry 10 }
|
|
|
|
|
|
|
|
-- Section 7: OSPF Neighbor Table
|
|
|
|
-- The OSPF Neighbor Table describes all neighbors in
|
|
-- the locality of the subject router.
|
|
|
|
|
|
snOspfNbrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnOspfNbrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of non-virtual neighbor information."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 10 The Neighbor Data
|
|
Structure"
|
|
::= { snOspfNbr 1 }
|
|
|
|
snOspfNbrEntry OBJECT-TYPE
|
|
SYNTAX SnOspfNbrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The information regarding a single neighbor."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 10 The Neighbor Data
|
|
Structure"
|
|
INDEX { snOspfNbrEntryIndex }
|
|
::= { snOspfNbrTable 1 }
|
|
|
|
SnOspfNbrEntry ::=
|
|
SEQUENCE {
|
|
snOspfNbrEntryIndex
|
|
Integer32,
|
|
snOspfNbrPort
|
|
Integer32,
|
|
snOspfNbrIpAddr
|
|
IpAddress,
|
|
snOspfNbrIndex
|
|
Integer32,
|
|
snOspfNbrRtrId
|
|
RouterID,
|
|
snOspfNbrOptions
|
|
Integer32,
|
|
snOspfNbrPriority
|
|
DesignatedRouterPriority,
|
|
snOspfNbrState
|
|
INTEGER,
|
|
snOspfNbrEvents
|
|
Counter32,
|
|
snOspfNbrLsRetransQLen
|
|
Gauge32
|
|
}
|
|
|
|
snOspfNbrEntryIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table entry index of this neighbor."
|
|
::= { snOspfNbrEntry 1 }
|
|
|
|
snOspfNbrPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The physical port of this neighbor."
|
|
::= { snOspfNbrEntry 2 }
|
|
|
|
|
|
snOspfNbrIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of this neighbor."
|
|
::= { snOspfNbrEntry 3 }
|
|
|
|
|
|
snOspfNbrIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The neighbor index of each port and each IP address."
|
|
::= { snOspfNbrEntry 4 }
|
|
|
|
snOspfNbrRtrId OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer (represented as a type IpAddress)
|
|
uniquely identifying the neighboring router in the
|
|
Autonomous System."
|
|
DEFVAL { '00000000'h } -- 0.0.0.0
|
|
::= { snOspfNbrEntry 5 }
|
|
|
|
|
|
snOspfNbrOptions OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Bit Mask corresponding to the neighbor's op-
|
|
tions field.
|
|
|
|
Bit 0, if set, indicates that the system will
|
|
operate on Type of Service metrics other than
|
|
TOS 0. If zero, the neighbor will ignore all
|
|
metrics except the TOS 0 metric.
|
|
|
|
Bit 1, if set, indicates that the associated
|
|
area accepts and operates on external informa-
|
|
tion; if zero, it is a stub area.
|
|
|
|
Bit 2, if set, indicates that the system is ca-
|
|
pable of routing IP Multicast datagrams; i.e.,
|
|
that it implements the Multicast Extensions to
|
|
OSPF.
|
|
|
|
Bit 3, if set, indicates that the associated
|
|
area is an NSSA. These areas are capable of
|
|
carrying type 7 external advertisements, which
|
|
are translated into type 5 external advertise-
|
|
ments at NSSA borders."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.2 Options"
|
|
DEFVAL { 0 }
|
|
::= { snOspfNbrEntry 6 }
|
|
|
|
|
|
snOspfNbrPriority OBJECT-TYPE
|
|
SYNTAX DesignatedRouterPriority
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority of this neighbor in the designat-
|
|
ed router election algorithm. The value 0 sig-
|
|
nifies that the neighbor is not eligible to be-
|
|
come the designated router on this particular
|
|
network."
|
|
DEFVAL { 1 }
|
|
::= { snOspfNbrEntry 7 }
|
|
|
|
|
|
snOspfNbrState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
down (1),
|
|
attempt (2),
|
|
init (3),
|
|
twoWay (4),
|
|
exchangeStart (5),
|
|
exchange (6),
|
|
loading (7),
|
|
full (8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The State of the relationship with this Neigh-
|
|
bor."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 10.1 Neighbor States"
|
|
DEFVAL { down }
|
|
::= { snOspfNbrEntry 8 }
|
|
|
|
|
|
snOspfNbrEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times this neighbor relationship
|
|
has changed state, or an error has occurred."
|
|
::= { snOspfNbrEntry 9 }
|
|
|
|
|
|
snOspfNbrLsRetransQLen OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current length of the retransmission
|
|
queue."
|
|
::= { snOspfNbrEntry 10 }
|
|
|
|
|
|
|
|
-- Section 8: OSPF Virtual Neighbor Table
|
|
|
|
-- This table describes all virtual neighbors.
|
|
-- Since Virtual Links are configured in the
|
|
-- virtual interface table, this table is read-only.
|
|
|
|
snOspfVirtNbrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnOspfVirtNbrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of virtual neighbor information."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 15 Virtual Links"
|
|
::= { snOspfVirtNbr 1 }
|
|
|
|
snOspfVirtNbrEntry OBJECT-TYPE
|
|
SYNTAX SnOspfVirtNbrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Virtual neighbor information."
|
|
INDEX { snOspfVirtNbrEntryIndex }
|
|
::= { snOspfVirtNbrTable 1 }
|
|
|
|
SnOspfVirtNbrEntry ::=
|
|
SEQUENCE {
|
|
snOspfVirtNbrEntryIndex
|
|
Integer32,
|
|
snOspfVirtNbrArea
|
|
AreaID,
|
|
snOspfVirtNbrRtrId
|
|
RouterID,
|
|
snOspfVirtNbrIpAddr
|
|
IpAddress,
|
|
snOspfVirtNbrOptions
|
|
Integer32,
|
|
snOspfVirtNbrState
|
|
INTEGER,
|
|
snOspfVirtNbrEvents
|
|
Counter32,
|
|
snOspfVirtNbrLSRetransQLen
|
|
Gauge32,
|
|
snOspfVirtNbrAreaIdFormat
|
|
INTEGER
|
|
}
|
|
|
|
snOspfVirtNbrEntryIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table entry index of this virtual neighbor."
|
|
::= { snOspfVirtNbrEntry 1 }
|
|
|
|
snOspfVirtNbrArea OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Transit Area Identifier."
|
|
::= { snOspfVirtNbrEntry 2 }
|
|
|
|
snOspfVirtNbrRtrId OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying the neighboring
|
|
router in the Autonomous System."
|
|
::= { snOspfVirtNbrEntry 3 }
|
|
|
|
snOspfVirtNbrIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address this Virtual Neighbor is using."
|
|
::= { snOspfVirtNbrEntry 4 }
|
|
|
|
snOspfVirtNbrOptions OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A bit map corresponding to the neighbor's options
|
|
field. Thus, Bit 1, if set, indicates that the
|
|
neighbor supports Type of Service Routing; if zero, no
|
|
metrics other than TOS 0 are in use by the neighbor."
|
|
::= { snOspfVirtNbrEntry 5 }
|
|
|
|
snOspfVirtNbrState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
down (1),
|
|
attempt (2),
|
|
init (3),
|
|
twoWay (4),
|
|
exchangeStart (5),
|
|
exchange (6),
|
|
loading (7),
|
|
full (8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the Virtual Neighbor Relationship."
|
|
::= { snOspfVirtNbrEntry 6 }
|
|
|
|
snOspfVirtNbrEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times this virtual link has changed its
|
|
state, or an error has occurred."
|
|
::= { snOspfVirtNbrEntry 7 }
|
|
|
|
snOspfVirtNbrLSRetransQLen OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current length of the retransmission queue."
|
|
::= { snOspfVirtNbrEntry 8 }
|
|
|
|
snOspfVirtNbrAreaIdFormat OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
integer(0),
|
|
ipAddress(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to specify whether
|
|
AreaId is represented as IP Address or
|
|
an Integer. The values
|
|
that can be written are:
|
|
integer(0).....as an integer.
|
|
ipAddress(1)...as IP Address."
|
|
::= { snOspfVirtNbrEntry 9 }
|
|
|
|
|
|
-- Section 9: OSPF Link State Database
|
|
|
|
-- The Link State Database contains the Link State
|
|
-- Advertisements from throughout the areas that the
|
|
-- device is attached to.
|
|
|
|
snOspfLsdbTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnOspfLsdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF Process's Links State Database."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12 Link State Advertisements"
|
|
::= { snOspfLsdb 1 }
|
|
|
|
snOspfLsdbEntry OBJECT-TYPE
|
|
SYNTAX SnOspfLsdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A single Link State Advertisement."
|
|
INDEX { snOspfLsdbEntryIndex }
|
|
::= { snOspfLsdbTable 1 }
|
|
|
|
SnOspfLsdbEntry ::=
|
|
SEQUENCE {
|
|
snOspfLsdbEntryIndex
|
|
Integer32,
|
|
snOspfLsdbAreaId
|
|
AreaID,
|
|
snOspfLsdbType
|
|
INTEGER,
|
|
snOspfLsdbLsId
|
|
IpAddress,
|
|
snOspfLsdbRouterId
|
|
RouterID,
|
|
snOspfLsdbSequence
|
|
Integer32,
|
|
snOspfLsdbAge
|
|
Integer32,
|
|
snOspfLsdbChecksum
|
|
Integer32,
|
|
snOspfLsdbAdvertisement
|
|
OCTET STRING,
|
|
snOspfLsdbAreaIdFormat
|
|
INTEGER
|
|
}
|
|
|
|
snOspfLsdbEntryIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table entry index of this Link State Database."
|
|
::= { snOspfLsdbEntry 1 }
|
|
|
|
|
|
snOspfLsdbAreaId OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32 bit identifier of the Area from which the LSA
|
|
was received."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { snOspfLsdbEntry 2 }
|
|
|
|
snOspfLsdbType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
routerLink (1),
|
|
networkLink (2),
|
|
summaryLink (3),
|
|
asSummaryLink (4),
|
|
asExternalLink (5),
|
|
multicastLink (6),
|
|
nssaExternalLink (7),
|
|
opaqueLink (9),
|
|
opaqueAreaLink (10),
|
|
opaqueAsLink (11)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the link state advertisement. Each link
|
|
state type has a separate advertisement format."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix A.4.1 The Link State
|
|
Advertisement header"
|
|
::= { snOspfLsdbEntry 3 }
|
|
|
|
snOspfLsdbLsId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Link State ID is an LS Type Specific field
|
|
containing either a Router ID or an IP Address; it
|
|
identifies the piece of the routing domain that is
|
|
being described by the advertisement."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.4 Link State ID"
|
|
::= { snOspfLsdbEntry 4 }
|
|
|
|
snOspfLsdbRouterId OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32 bit number that uniquely identifies the
|
|
originating router in the Autonomous System."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.1 Global parameters"
|
|
::= { snOspfLsdbEntry 5 }
|
|
|
|
-- Note that the OSPF Sequence Number is a 32 bit signed
|
|
-- integer. It starts with the value '80000001'h,
|
|
-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
|
|
-- Thus, a typical sequence number will be very negative.
|
|
|
|
snOspfLsdbSequence OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sequence number field is a signed 32-bit integer.
|
|
It is used to detect old and duplicate link state
|
|
advertisements. The space of sequence numbers is
|
|
linearly ordered. The larger the sequence number the
|
|
more recent the advertisement."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.6 LS sequence number"
|
|
::= { snOspfLsdbEntry 6 }
|
|
|
|
snOspfLsdbAge OBJECT-TYPE
|
|
SYNTAX Integer32 -- Should be 0..MaxAge
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is the age of the link state advertisement
|
|
in seconds."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.1 LS age"
|
|
::= { snOspfLsdbEntry 7 }
|
|
|
|
snOspfLsdbChecksum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is the checksum of the complete contents of
|
|
the advertisement, excepting the age field. The age
|
|
field is excepted so that an advertisement's age can be
|
|
incremented without updating the checksum. The
|
|
checksum used is the same that is used for ISO
|
|
connectionless datagrams; it is commonly referred to as
|
|
the Fletcher checksum."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.7 LS checksum"
|
|
::= { snOspfLsdbEntry 8 }
|
|
|
|
snOspfLsdbAdvertisement OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..65535))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entire Link State Advertisement, including its
|
|
header."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12 Link State Advertisements"
|
|
::= { snOspfLsdbEntry 9 }
|
|
|
|
|
|
snOspfLsdbAreaIdFormat OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
integer(0),
|
|
ipAddress(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to specify whether
|
|
AreaId is represented as IP Address or
|
|
an Integer. The values
|
|
that can be written are:
|
|
integer(0).....as an integer.
|
|
ipAddress(1)...as IP Address."
|
|
::= { snOspfLsdbEntry 10 }
|
|
|
|
|
|
-- Section 10: OSPF Link State Database, External
|
|
|
|
-- The Link State Database contains the Link State
|
|
-- Advertisements from throughout the areas that the
|
|
-- device is attached to.
|
|
|
|
-- This table is identical to the OSPF LSDB Table in
|
|
-- format, but contains only External Link State
|
|
-- Advertisements. The purpose is to allow external
|
|
-- LSAs to be displayed once for the router rather
|
|
-- than once in each non-stub area.
|
|
|
|
snOspfExtLsdbTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnOspfExtLsdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF Process's Links State Database."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12 Link State Adver-
|
|
tisements"
|
|
::= { snOspfExtLsdb 1 }
|
|
|
|
|
|
snOspfExtLsdbEntry OBJECT-TYPE
|
|
SYNTAX SnOspfExtLsdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A single Link State Advertisement."
|
|
INDEX { snOspfExtLsdbEntryIndex }
|
|
::= { snOspfExtLsdbTable 1 }
|
|
|
|
SnOspfExtLsdbEntry ::=
|
|
SEQUENCE {
|
|
snOspfExtLsdbEntryIndex
|
|
Integer32,
|
|
snOspfExtLsdbType
|
|
INTEGER,
|
|
snOspfExtLsdbLsId
|
|
IpAddress,
|
|
snOspfExtLsdbRouterId
|
|
RouterID,
|
|
snOspfExtLsdbSequence
|
|
Integer32,
|
|
snOspfExtLsdbAge
|
|
Integer32,
|
|
snOspfExtLsdbChecksum
|
|
Integer32,
|
|
snOspfExtLsdbAdvertisement
|
|
OCTET STRING
|
|
}
|
|
|
|
snOspfExtLsdbEntryIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table entry index of this Link State Database."
|
|
::= { snOspfExtLsdbEntry 1 }
|
|
|
|
|
|
snOspfExtLsdbType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
asExternalLink (5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the link state advertisement.
|
|
Each link state type has a separate advertise-
|
|
ment format."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix A.4.1 The Link State
|
|
Advertisement header"
|
|
::= { snOspfExtLsdbEntry 2 }
|
|
|
|
|
|
snOspfExtLsdbLsId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Link State ID is an LS Type Specific field
|
|
containing either a Router ID or an IP Address;
|
|
it identifies the piece of the routing domain
|
|
that is being described by the advertisement."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.4 Link State ID"
|
|
::= { snOspfExtLsdbEntry 3 }
|
|
|
|
|
|
snOspfExtLsdbRouterId OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32 bit number that uniquely identifies the
|
|
originating router in the Autonomous System."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.1 Global parameters"
|
|
::= { snOspfExtLsdbEntry 4 }
|
|
|
|
-- Note that the OSPF Sequence Number is a 32 bit signed
|
|
-- integer. It starts with the value '80000001'h,
|
|
-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
|
|
-- Thus, a typical sequence number will be very negative.
|
|
|
|
|
|
snOspfExtLsdbSequence OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sequence number field is a signed 32-bit
|
|
integer. It is used to detect old and dupli-
|
|
cate link state advertisements. The space of
|
|
sequence numbers is linearly ordered. The
|
|
larger the sequence number the more recent the
|
|
advertisement."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.6 LS sequence
|
|
number"
|
|
::= { snOspfExtLsdbEntry 5 }
|
|
|
|
|
|
snOspfExtLsdbAge OBJECT-TYPE
|
|
SYNTAX Integer32 -- Should be 0..MaxAge
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is the age of the link state adver-
|
|
tisement in seconds."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.1 LS age"
|
|
::= { snOspfExtLsdbEntry 6 }
|
|
|
|
|
|
snOspfExtLsdbChecksum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is the checksum of the complete
|
|
contents of the advertisement, excepting the
|
|
age field. The age field is excepted so that
|
|
an advertisement's age can be incremented
|
|
without updating the checksum. The checksum
|
|
used is the same that is used for ISO connec-
|
|
tionless datagrams; it is commonly referred to
|
|
as the Fletcher checksum."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.7 LS checksum"
|
|
::= { snOspfExtLsdbEntry 7 }
|
|
|
|
|
|
snOspfExtLsdbAdvertisement OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(36))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entire Link State Advertisement, including
|
|
its header."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12 Link State Adver-
|
|
tisements"
|
|
::= { snOspfExtLsdbEntry 8 }
|
|
|
|
|
|
|
|
-- Section 11: OSPF Area Status Table
|
|
|
|
-- The OSPF Area Status Data Structure contains information
|
|
-- regarding the various areas. The interfaces and
|
|
-- virtual links are configured as part of these areas.
|
|
-- Area 0.0.0.0, by definition, is the Backbone Area
|
|
|
|
snOspfAreaStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnOspfAreaStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information describing the configured parameters and
|
|
cumulative statistics of the router's attached areas."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 6 The Area Data Structure"
|
|
::= { snOspfAreaStatus 1 }
|
|
|
|
snOspfAreaStatusEntry OBJECT-TYPE
|
|
SYNTAX SnOspfAreaStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information describing the configured parameters and
|
|
cumulative statistics of one of the router's attached
|
|
areas."
|
|
INDEX { snOspfAreaStatusEntryIndex }
|
|
::= { snOspfAreaStatusTable 1 }
|
|
|
|
SnOspfAreaStatusEntry ::=
|
|
SEQUENCE {
|
|
snOspfAreaStatusEntryIndex
|
|
Integer32,
|
|
snOspfAreaStatusAreaId
|
|
AreaID,
|
|
snOspfAreaStatusImportASExtern
|
|
Integer32,
|
|
snOspfAreaStatusStubMetric
|
|
BigMetric,
|
|
snOspfAreaStatusSpfRuns
|
|
Counter32,
|
|
snOspfAreaStatusAreaBdrRtrCount
|
|
Gauge32,
|
|
snOspfAreaStatusASBdrRtrCount
|
|
Gauge32,
|
|
snOspfAreaStatusLSACount
|
|
Gauge32,
|
|
snOspfAreaStatusLSACksumSum
|
|
Integer32,
|
|
snOspfAreaStatusAreaIdFormat
|
|
INTEGER
|
|
}
|
|
|
|
snOspfAreaStatusEntryIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table entry index of this Area."
|
|
::= { snOspfAreaStatusEntry 1 }
|
|
|
|
|
|
snOspfAreaStatusAreaId OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying an area. Area
|
|
ID 0.0.0.0 is used for the OSPF backbone."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { snOspfAreaStatusEntry 2 }
|
|
|
|
snOspfAreaStatusImportASExtern OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The area's support for importing AS external link-
|
|
state advertisements."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
DEFVAL { 1 }
|
|
::= { snOspfAreaStatusEntry 3 }
|
|
|
|
snOspfAreaStatusStubMetric OBJECT-TYPE
|
|
SYNTAX BigMetric
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric value applied at the default type of
|
|
service(ospfMetric). By default, this equals the
|
|
least metric at the type of service among the
|
|
interfaces to other areas. This Object exist if
|
|
only if the value of snOspfAreaSummary is
|
|
snOspfAreaSummary(2); Otherwise, an SNMP_GET/GET_NEXT
|
|
attempt of this Object will return NO_SUCH_NAME."
|
|
::= { snOspfAreaStatusEntry 4 }
|
|
|
|
snOspfAreaStatusSpfRuns OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times that the intra-area route table
|
|
has been calculated using this area's link-state
|
|
database. This is typically done using Dijkstra's
|
|
algorithm."
|
|
::= { snOspfAreaStatusEntry 5 }
|
|
|
|
snOspfAreaStatusAreaBdrRtrCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of area border routers reachable
|
|
within this area. This is initially zero, and is
|
|
calculated in each SPF Pass."
|
|
DEFVAL { 0 }
|
|
::= { snOspfAreaStatusEntry 6 }
|
|
|
|
snOspfAreaStatusASBdrRtrCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Autonomous System border routers
|
|
reachable within this area. This is initially zero,
|
|
and is calculated in each SPF Pass."
|
|
DEFVAL { 0 }
|
|
::= { snOspfAreaStatusEntry 7 }
|
|
|
|
snOspfAreaStatusLSACount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of link-state advertisements in this
|
|
area's link-state database, excluding AS External
|
|
LSA's."
|
|
DEFVAL { 0 }
|
|
::= { snOspfAreaStatusEntry 8 }
|
|
|
|
snOspfAreaStatusLSACksumSum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32-bit unsigned sum of the link-state
|
|
advertisements' LS checksums contained in this area's
|
|
link-state database. This sum excludes external (LS
|
|
type 5) link-state advertisements. The sum can be used
|
|
to determine if there has been a change in a router's
|
|
link state database, and to compare the link-state
|
|
database of two routers."
|
|
DEFVAL { 0 }
|
|
::= { snOspfAreaStatusEntry 9 }
|
|
|
|
|
|
snOspfAreaStatusAreaIdFormat OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
integer(0),
|
|
ipAddress(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to specify whether
|
|
AreaId is represented as IP Address or
|
|
an Integer. The values
|
|
that can be written are:
|
|
integer(0).....as an integer.
|
|
ipAddress(1)...as IP Address."
|
|
::= { snOspfAreaStatusEntry 10 }
|
|
|
|
|
|
|
|
-- Section 12: OSPF Interface Status Table
|
|
|
|
-- The OSPF Interface Status Table augments the ifStatusTable with OSPF
|
|
-- specific information.
|
|
|
|
|
|
snOspfIfStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnOspfIfStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF Interface Status Table describes the interfaces from
|
|
the viewpoint of OSPF."
|
|
::= { snOspfIfStatus 1 }
|
|
|
|
snOspfIfStatusEntry OBJECT-TYPE
|
|
SYNTAX SnOspfIfStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF Interface Entry describes one interface from
|
|
the viewpoint of OSPF."
|
|
INDEX { snOspfIfStatusEntryIndex }
|
|
::= { snOspfIfStatusTable 1 }
|
|
|
|
SnOspfIfStatusEntry ::=
|
|
SEQUENCE {
|
|
snOspfIfStatusEntryIndex
|
|
Integer32,
|
|
snOspfIfStatusPort
|
|
Integer32,
|
|
snOspfIfStatusIpAddress
|
|
IpAddress,
|
|
snOspfIfStatusAreaId
|
|
AreaID,
|
|
snOspfIfStatusType
|
|
INTEGER,
|
|
snOspfIfStatusAdminStat
|
|
RtrStatus,
|
|
snOspfIfStatusRtrPriority
|
|
DesignatedRouterPriority,
|
|
snOspfIfStatusTransitDelay
|
|
UpToMaxAge,
|
|
snOspfIfStatusRetransInterval
|
|
UpToMaxAge,
|
|
snOspfIfStatusHelloInterval
|
|
HelloRange,
|
|
snOspfIfStatusRtrDeadInterval
|
|
PositiveInteger,
|
|
snOspfIfStatusState
|
|
INTEGER,
|
|
snOspfIfStatusDesignatedRouter
|
|
IpAddress,
|
|
snOspfIfStatusBackupDesignatedRouter
|
|
IpAddress,
|
|
snOspfIfStatusEvents
|
|
Counter32,
|
|
snOspfIfStatusAuthType
|
|
Integer32,
|
|
snOspfIfStatusAuthKey
|
|
OCTET STRING,
|
|
snOspfIfStatusMetricValue
|
|
Metric,
|
|
snOspfIfStatusMd5AuthKeyId
|
|
INTEGER,
|
|
snOspfIfStatusMd5AuthKey
|
|
OCTET STRING,
|
|
snOspfIfStatusMd5ActivationWaitTime
|
|
INTEGER,
|
|
snOspfIfStatusAreaIdFormat
|
|
INTEGER
|
|
}
|
|
|
|
snOspfIfStatusEntryIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table entry index of this Area."
|
|
::= { snOspfIfStatusEntry 1 }
|
|
|
|
snOspfIfStatusPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The physical router port of this OSPF interface."
|
|
::= { snOspfIfStatusEntry 2 }
|
|
|
|
snOspfIfStatusIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of this OSPF interface."
|
|
::= { snOspfIfStatusEntry 3 }
|
|
|
|
|
|
snOspfIfStatusAreaId OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying the area to
|
|
which the interface connects. Area ID 0.0.0.0 is used
|
|
for the OSPF backbone."
|
|
DEFVAL { '00000000'h } -- 0.0.0.0
|
|
::= { snOspfIfStatusEntry 4 }
|
|
|
|
|
|
snOspfIfStatusType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
broadcast (1),
|
|
nbma (2),
|
|
pointToPoint (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF interface type.
|
|
|
|
By way of a default, this field may be intuited from
|
|
the corresponding value of ifType. Broadcast LANs,
|
|
such as Ethernet and IEEE 802.5, take the value
|
|
'broadcast', X.25, Frame Relay, and similar
|
|
technologies take the value 'nbma', and links that are
|
|
definitively point to point take the value
|
|
'pointToPoint'."
|
|
::= { snOspfIfStatusEntry 5 }
|
|
|
|
|
|
snOspfIfStatusAdminStat OBJECT-TYPE
|
|
SYNTAX RtrStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF interface's administrative status. The value
|
|
'enabled' denotes that neighbor relationships may be
|
|
formed on the interface, and the interface will be
|
|
advertised as an internal route to some area. The
|
|
value 'disabled' denotes that the interface is external
|
|
to OSPF."
|
|
::= { snOspfIfStatusEntry 6 }
|
|
|
|
snOspfIfStatusRtrPriority OBJECT-TYPE
|
|
SYNTAX DesignatedRouterPriority
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority of this interface. Used in multi-access
|
|
networks, this field is used in the designated router
|
|
election algorithm. The value 0 signifies that the
|
|
router is not eligible to become the designated router
|
|
on this particular network. In the event of a tie in
|
|
this value, routers will use their router id as a tie
|
|
breaker."
|
|
DEFVAL { 1 }
|
|
::= { snOspfIfStatusEntry 7 }
|
|
|
|
snOspfIfStatusTransitDelay OBJECT-TYPE
|
|
SYNTAX UpToMaxAge
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated number of seconds it takes to transmit a
|
|
link- state update packet over this interface."
|
|
DEFVAL { 1 }
|
|
::= { snOspfIfStatusEntry 8 }
|
|
|
|
snOspfIfStatusRetransInterval OBJECT-TYPE
|
|
SYNTAX UpToMaxAge
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds between link-state advertisement
|
|
retransmissions, for adjacencies belonging to this
|
|
interface. This value is also used when retransmitting
|
|
database description and link-state request packets."
|
|
DEFVAL { 5 }
|
|
::= { snOspfIfStatusEntry 9 }
|
|
|
|
snOspfIfStatusHelloInterval OBJECT-TYPE
|
|
SYNTAX HelloRange
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length of time, in seconds, between the Hello
|
|
packets that the router sends on the interface. This
|
|
value must be the same for all routers attached to a
|
|
common network."
|
|
DEFVAL { 10 }
|
|
::= { snOspfIfStatusEntry 10 }
|
|
|
|
snOspfIfStatusRtrDeadInterval OBJECT-TYPE
|
|
SYNTAX PositiveInteger
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds that a router's Hello packets
|
|
have not been seen before it's neighbors declare the
|
|
router down. This should be some multiple of the Hello
|
|
interval. This value must be the same for all routers
|
|
attached to a common network."
|
|
DEFVAL { 40 }
|
|
::= { snOspfIfStatusEntry 11 }
|
|
|
|
snOspfIfStatusState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
down (1),
|
|
loopback (2),
|
|
waiting (3),
|
|
pointToPoint (4),
|
|
designatedRouter (5),
|
|
backupDesignatedRouter (6),
|
|
otherDesignatedRouter (7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF Interface State."
|
|
DEFVAL { down }
|
|
::= { snOspfIfStatusEntry 12 }
|
|
|
|
snOspfIfStatusDesignatedRouter OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the Designated Router."
|
|
DEFVAL { '00000000'h } -- 0.0.0.0
|
|
::= { snOspfIfStatusEntry 13 }
|
|
|
|
snOspfIfStatusBackupDesignatedRouter OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the Backup Designated Router."
|
|
DEFVAL { '00000000'h } -- 0.0.0.0
|
|
::= { snOspfIfStatusEntry 14 }
|
|
|
|
snOspfIfStatusEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times this OSPF interface has changed
|
|
its state, or an error has occurred."
|
|
::= { snOspfIfStatusEntry 15 }
|
|
|
|
|
|
snOspfIfStatusAuthType OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
-- none (0),
|
|
-- simplePassword (1)
|
|
-- reserved for specification by IANA (> 1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The authentication type specified for an interface.
|
|
Additional authentication types may be assigned locally
|
|
on a per interface basis."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix E Authentication"
|
|
DEFVAL { 0 } -- no authentication, by default
|
|
::= { snOspfIfStatusEntry 16 }
|
|
|
|
|
|
snOspfIfStatusAuthKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Authentication Key. If the Area's Authorization
|
|
Type is simplePassword, and the key length is shorter
|
|
than 8 octets, the agent will left adjust and zero fill
|
|
to 8 octets.
|
|
|
|
When read, snOspfIfStatusAuthKey always returns an Octet String
|
|
of length zero."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 9 The Interface Data
|
|
Structure"
|
|
DEFVAL { '0000000000000000'h } -- 0.0.0.0.0.0.0.0
|
|
::= { snOspfIfStatusEntry 17 }
|
|
|
|
|
|
snOspfIfStatusMetricValue OBJECT-TYPE
|
|
SYNTAX Metric
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric of using this type of service on
|
|
this interface. The default value of the TOS 0
|
|
Metric is 10^8 / ifSpeed."
|
|
::= { snOspfIfStatusEntry 18 }
|
|
|
|
snOspfIfStatusMd5AuthKeyId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The md5 authentication key ID. If the snOspfVirtIfAuthType
|
|
is set to md5, the value of snOspfIfMd5AuthKeyId must be
|
|
(1 to 255). This field identifies the algorithm and secret
|
|
key used to create the message digest appended to the OSPF
|
|
packet. Key Identifiers are unique per-interface
|
|
(or equivalently, per-subnet)."
|
|
::= { snOspfIfStatusEntry 19 }
|
|
|
|
|
|
snOspfIfStatusMd5AuthKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MD5 Authentication Key. If the Area's Authorization
|
|
Type is md5, and the key length is shorter than 16 octets,
|
|
the agent will left adjust and zero fill to 16 octets.
|
|
When read, snOspfIfMd5AuthKey always returns an Octet String
|
|
of length zero."
|
|
::= { snOspfIfStatusEntry 20 }
|
|
|
|
|
|
snOspfIfStatusMd5ActivationWaitTime OBJECT-TYPE
|
|
SYNTAX INTEGER (0..14400)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The md5 authentication key activation wait time is specified in second
|
|
and the maximum wait time is 14400 seconds (4 hours)."
|
|
::= { snOspfIfStatusEntry 21 }
|
|
|
|
snOspfIfStatusAreaIdFormat OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
integer(0),
|
|
ipAddress(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to specify whether
|
|
AreaId is represented as IP Address or
|
|
an Integer. The values
|
|
that can be written are:
|
|
integer(0).....as an integer.
|
|
ipAddress(1)...as IP Address."
|
|
::= { snOspfIfStatusEntry 22 }
|
|
|
|
|
|
-- Section 13: OSPF Virtual Interface Status Table
|
|
|
|
-- The Virtual Interface Status Table describes the virtual
|
|
-- links status data.
|
|
|
|
|
|
|
|
snOspfVirtIfStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnOspfVirtIfStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about this router's virtual interfaces."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.4 Virtual link parameters"
|
|
::= { snOspfVirtIfStatus 1 }
|
|
|
|
snOspfVirtIfStatusEntry OBJECT-TYPE
|
|
SYNTAX SnOspfVirtIfStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a single Virtual Interface."
|
|
INDEX { snOspfVirtIfStatusEntryIndex }
|
|
::= { snOspfVirtIfStatusTable 1 }
|
|
|
|
SnOspfVirtIfStatusEntry ::=
|
|
SEQUENCE {
|
|
snOspfVirtIfStatusEntryIndex
|
|
Integer32,
|
|
snOspfVirtIfStatusAreaID
|
|
AreaID,
|
|
snOspfVirtIfStatusNeighbor
|
|
RouterID,
|
|
snOspfVirtIfStatusTransitDelay
|
|
UpToMaxAge,
|
|
snOspfVirtIfStatusRetransInterval
|
|
UpToMaxAge,
|
|
snOspfVirtIfStatusHelloInterval
|
|
HelloRange,
|
|
snOspfVirtIfStatusRtrDeadInterval
|
|
PositiveInteger,
|
|
snOspfVirtIfStatusState
|
|
INTEGER,
|
|
snOspfVirtIfStatusEvents
|
|
Counter32,
|
|
snOspfVirtIfStatusAuthType
|
|
Integer32,
|
|
snOspfVirtIfStatusAuthKey
|
|
OCTET STRING,
|
|
snOspfVirtIfStatusMd5AuthKeyId
|
|
INTEGER,
|
|
snOspfVirtIfStatusMd5AuthKey
|
|
OCTET STRING,
|
|
snOspfVirtIfStatusMd5ActivationWaitTime
|
|
INTEGER,
|
|
snOspfVirtIfStatusAreaIdFormat
|
|
INTEGER
|
|
}
|
|
|
|
snOspfVirtIfStatusEntryIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table entry index of this Area."
|
|
::= { snOspfVirtIfStatusEntry 1 }
|
|
|
|
|
|
snOspfVirtIfStatusAreaID OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Transit Area that the Virtual Link traverses. By
|
|
definition, this is not 0.0.0.0 "
|
|
::= { snOspfVirtIfStatusEntry 2 }
|
|
|
|
snOspfVirtIfStatusNeighbor OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Router ID of the Virtual Neighbor."
|
|
::= { snOspfVirtIfStatusEntry 3 }
|
|
|
|
snOspfVirtIfStatusTransitDelay OBJECT-TYPE
|
|
SYNTAX UpToMaxAge
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated number of seconds it takes to transmit a
|
|
link- state update packet over this interface."
|
|
DEFVAL { 1 }
|
|
::= { snOspfVirtIfStatusEntry 4 }
|
|
|
|
snOspfVirtIfStatusRetransInterval OBJECT-TYPE
|
|
SYNTAX UpToMaxAge
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds between link-state advertisement
|
|
retransmissions, for adjacencies belonging to this
|
|
interface. This value is also used when retransmitting
|
|
database description and link-state request packets.
|
|
This value should be well over the expected round-trip
|
|
time."
|
|
DEFVAL { 5 }
|
|
::= { snOspfVirtIfStatusEntry 5 }
|
|
|
|
snOspfVirtIfStatusHelloInterval OBJECT-TYPE
|
|
SYNTAX HelloRange
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length of time, in seconds, between the Hello
|
|
packets that the router sends on the interface. This
|
|
value must be the same for the virtual neighbor."
|
|
DEFVAL { 10 }
|
|
::= { snOspfVirtIfStatusEntry 6 }
|
|
|
|
snOspfVirtIfStatusRtrDeadInterval OBJECT-TYPE
|
|
SYNTAX PositiveInteger
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds that a router's Hello packets
|
|
have not been seen before it's neighbors declare the
|
|
router down. This should be some multiple of the Hello
|
|
interval. This value must be the same for the virtual
|
|
neighbor."
|
|
DEFVAL { 60 }
|
|
::= { snOspfVirtIfStatusEntry 7 }
|
|
|
|
|
|
snOspfVirtIfStatusState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
down (1),
|
|
pointToPoint (4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF virtual interfaces states."
|
|
DEFVAL { down }
|
|
::= { snOspfVirtIfStatusEntry 8 }
|
|
|
|
|
|
snOspfVirtIfStatusEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of state changes or error events on
|
|
this Virtual Link."
|
|
::= { snOspfVirtIfStatusEntry 9 }
|
|
|
|
|
|
snOspfVirtIfStatusAuthType OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
-- none (0),
|
|
-- simplePassword (1)
|
|
-- reserved for specification by IANA (> 1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The authentication type specified for an interface.
|
|
Additional authentication types may be assigned locally
|
|
on a per interface basis."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix E Authentication"
|
|
DEFVAL { 0 } -- no authentication, by default
|
|
::= { snOspfVirtIfStatusEntry 10 }
|
|
|
|
snOspfVirtIfStatusAuthKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If Authentication Type is simplePassword, the device
|
|
will left adjust and zero fill to 8 octets.
|
|
|
|
When read, snOspfVifAuthKey always returns a string of
|
|
length zero."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 9 The Interface Data
|
|
Structure"
|
|
DEFVAL { '0000000000000000'h } -- 0.0.0.0.0.0.0.0
|
|
::= { snOspfVirtIfStatusEntry 11 }
|
|
|
|
snOspfVirtIfStatusMd5AuthKeyId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The md5 authentication key ID. If the snOspfVirtIfAuthType
|
|
is set to md5, the value of snOspfVirtIfMd5AuthKeyId must be
|
|
(1 to 255). This field identifies the algorithm and secret
|
|
key used to create the message digest appended to the OSPF
|
|
packet. Key Identifiers are unique per-interface
|
|
(or equivalently, per-subnet)."
|
|
::= { snOspfVirtIfStatusEntry 12 }
|
|
|
|
|
|
snOspfVirtIfStatusMd5AuthKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MD5 Authentication Key. If the Area's Authorization
|
|
Type is md5, and the key length is shorter than 16 octets,
|
|
the agent will left adjust and zero fill to 16 octets.
|
|
|
|
When read, snOspfIfMd5AuthKey always returns an Octet String
|
|
of length zero."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 9 The Interface Data
|
|
Structure"
|
|
DEFVAL { '0000000000000000'h } -- 0.0.0.0.0.0.0.0
|
|
::= { snOspfVirtIfStatusEntry 13 }
|
|
|
|
|
|
snOspfVirtIfStatusMd5ActivationWaitTime OBJECT-TYPE
|
|
SYNTAX INTEGER (0..14400)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The md5 authentication key activation wait time is specified in second
|
|
and the maximum wait time is 14400 seconds (4 hours)."
|
|
::= { snOspfVirtIfStatusEntry 14 }
|
|
|
|
|
|
snOspfVirtIfStatusAreaIdFormat OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
integer(0),
|
|
ipAddress(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to specify whether
|
|
AreaId is represented as IP Address or
|
|
an Integer. The values
|
|
that can be written are:
|
|
integer(0).....as an integer.
|
|
ipAddress(1)...as IP Address."
|
|
::= { snOspfVirtIfStatusEntry 15 }
|
|
|
|
|
|
-- Section 14: OSPF Routing Information Table
|
|
|
|
-- The OSPF Routing Information Table describes the OSPF ABR/ASBR
|
|
-- routing information.
|
|
|
|
|
|
|
|
snOspfRoutingInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnOspfRoutingInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about this router's routing information."
|
|
::= { snOspfRoutingInfo 1 }
|
|
|
|
snOspfRoutingInfoEntry OBJECT-TYPE
|
|
SYNTAX SnOspfRoutingInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a single ABR/ASBR Routing entry."
|
|
INDEX { snOspfRoutingInfoIndex }
|
|
::= { snOspfRoutingInfoTable 1 }
|
|
|
|
SnOspfRoutingInfoEntry ::=
|
|
SEQUENCE {
|
|
snOspfRoutingInfoIndex
|
|
Integer32,
|
|
snOspfRoutingInfoRouterID
|
|
RouterID,
|
|
snOspfRoutingInfoRouterType
|
|
INTEGER,
|
|
snOspfRoutingInfoNextHopRouterID
|
|
RouterID,
|
|
snOspfRoutingInfoOutgoingInterface
|
|
Integer32
|
|
}
|
|
|
|
snOspfRoutingInfoIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table entry index of this Routing entry."
|
|
::= { snOspfRoutingInfoEntry 1 }
|
|
|
|
|
|
snOspfRoutingInfoRouterID OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Router ID of the destination router."
|
|
::= { snOspfRoutingInfoEntry 2 }
|
|
|
|
snOspfRoutingInfoRouterType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
abr (1),
|
|
asbr (2),
|
|
abrANDasbr(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Router type of the destination router as the following:
|
|
abr (1) -- area border router.
|
|
asbr (2) -- autonomous sytem border router.
|
|
abrANDasbr(3) -- area border and autonomous system border router."
|
|
::= { snOspfRoutingInfoEntry 3 }
|
|
|
|
snOspfRoutingInfoNextHopRouterID OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The router ID of the next hop destination router."
|
|
::= { snOspfRoutingInfoEntry 4 }
|
|
|
|
snOspfRoutingInfoOutgoingInterface OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The outgoing interface of the destination router."
|
|
::= { snOspfRoutingInfoEntry 5 }
|
|
|
|
-- Section 15: Trap Support Objects
|
|
|
|
-- The following are support objects for the OSPF traps.
|
|
|
|
|
|
snOspfSetTrap OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A four-octet string serving as a bit map for
|
|
the trap events defined by the OSPF traps. This
|
|
object is used to enable and disable specific
|
|
OSPF traps where a 1 in the bit field
|
|
represents enabled. The right-most bit (least
|
|
significant) represents trap 0."
|
|
::= { snOspfTrapControl 1 }
|
|
|
|
|
|
snOspfConfigErrorType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unUsed (0),
|
|
badVersion (1),
|
|
areaMismatch (2),
|
|
unknownNbmaNbr (3), -- Router is Dr eligible
|
|
unknownVirtualNbr (4),
|
|
authTypeMismatch(5),
|
|
authFailure (6),
|
|
netMaskMismatch (7),
|
|
helloIntervalMismatch (8),
|
|
deadIntervalMismatch (9),
|
|
optionMismatch (10) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Potential types of configuration conflicts.
|
|
Used by the ospfConfigError and ospfConfigVir-
|
|
tError traps."
|
|
::= { snOspfTrapControl 2 }
|
|
|
|
|
|
snOspfPacketType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unUsed (0),
|
|
hello (1),
|
|
dbDescript (2),
|
|
lsReq (3),
|
|
lsUpdate (4),
|
|
lsAck (5) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"OSPF packet types."
|
|
::= { snOspfTrapControl 3 }
|
|
|
|
|
|
snOspfPacketSrc OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of an inbound packet that can-
|
|
not be identified by a neighbor instance."
|
|
::= { snOspfTrapControl 4 }
|
|
|
|
snOspfTrapsGenerationMode OBJECT-TYPE
|
|
SYNTAX RtrStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates if the generation of any OSPF traps is permitted on the router.
|
|
The value 'enabled' denotes that the OSPF Traps can be generated by the
|
|
router; 'disabled' denotes that the OSPF Traps can not be generated by the
|
|
router even when snOspfSetTrap indicates the generation of specific OSPF Traps.
|
|
This object provides global control on the generation of ospf traps."
|
|
::= { snOspfTrapControl 5 }
|
|
|
|
|
|
END
|