9173 lines
249 KiB
Plaintext
9173 lines
249 KiB
Plaintext
FOUNDRY-SN-SWITCH-GROUP-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE,Integer32,Unsigned32, Gauge32, Counter32, Counter64, TimeTicks, IpAddress
|
|
FROM SNMPv2-SMI
|
|
switch
|
|
FROM FOUNDRY-SN-ROOT-MIB
|
|
DisplayString,MacAddress
|
|
FROM FOUNDRY-SN-AGENT-MIB
|
|
InterfaceIndex, ifIndex, InterfaceIndexOrZero
|
|
FROM IF-MIB
|
|
TruthValue,TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC;
|
|
|
|
snSwitch MODULE-IDENTITY
|
|
LAST-UPDATED "201006020000Z" -- 04 June 2010
|
|
ORGANIZATION "Brocade Communications Systems, Inc."
|
|
CONTACT-INFO
|
|
"Technical Support Center
|
|
130 Holger Way,
|
|
San Jose, CA 95134
|
|
Email: ipsupport@brocade.com
|
|
Phone: 1-800-752-8061
|
|
URL: www.brocade.com"
|
|
DESCRIPTION
|
|
"Copyright 1996-2010 Brocade Communications Systems, Inc.
|
|
All rights reserved.
|
|
This Brocade Communications Systems SNMP Management Information Base Specification
|
|
embodies Brocade Communications Systems' confidential and proprietary
|
|
intellectual property. Brocade Communications Systems retains all
|
|
title and ownership in the Specification, including any revisions.
|
|
|
|
This Specification is supplied AS IS, and Brocade Communications Systems makes
|
|
no warranty, either express or implied, as to the use,
|
|
operation, condition, or performance of the specification, and any unintended
|
|
consequence it may on the user environment."
|
|
|
|
REVISION "201006020000Z" -- 04 June 2010
|
|
DESCRIPTION
|
|
"Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields."
|
|
REVISION "200909300000Z" -- September 30, 2009
|
|
DESCRIPTION
|
|
"convert from SMIv1 to SMIv2"
|
|
::= { switch 3 }
|
|
|
|
-- textual conventions
|
|
|
|
|
|
|
|
PhysAddress ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This data type is used to model media addresses. For many
|
|
types of media, this will be in a binary representation.
|
|
For example, an ethernet address would be represented as
|
|
a string of 6 octets.
|
|
"
|
|
SYNTAX OCTET STRING
|
|
|
|
BridgeId ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
the Bridge-Identifier as used in the Spanning Tree
|
|
"
|
|
SYNTAX OCTET STRING (SIZE(8))
|
|
|
|
Timeout ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
a STP timer in units of 1/100 seconds
|
|
"
|
|
SYNTAX Integer32
|
|
|
|
PortMask ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This data type is used to model port bitmask. The
|
|
maximum of ports are 32.
|
|
"
|
|
SYNTAX Integer32
|
|
|
|
|
|
InterfaceId ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
-- This data type is used to specify an interface ID.
|
|
-- The first object identifier is port type, and the
|
|
-- format of the rest of the object identifiers depend
|
|
-- on the port type.
|
|
--
|
|
-- ethernet(1), format: type.slot.port
|
|
-- e.g. 1.3.6 is port ethernet 3/6
|
|
--
|
|
-- pos(2), format: type.slot.port
|
|
-- e.g. 2.10.1 is port pos 10/1
|
|
--
|
|
-- atm(3), format: type.slot.port
|
|
-- e.g. 3.8.2 is port atm 8/2
|
|
--
|
|
-- virtual router interface(4), format: type.ve
|
|
-- e.g. 4.9 is port ve 9
|
|
--
|
|
-- loopback(5), format: type.lb
|
|
-- e.g. 5.7 is port loopback 7
|
|
--
|
|
-- gre tunnel(6), format: type.tn, not supported
|
|
--
|
|
-- subinterface(7), format: type.slot.port.subInterface
|
|
-- e.g. 7.3.2.4 is port atm 3/2.4
|
|
--
|
|
-- mpls tunnel(8), format: type.tn
|
|
-- e.g. 8.3 is port tunnel 3
|
|
--
|
|
-- pvc(9), format: type.slot.port.subInterface.vpi.vci
|
|
-- e.g. 9.3.1.2.1.2 is port atm 3/1.2.1.2
|
|
--
|
|
-- management(10), format: type.slot.port
|
|
-- e.g. 10.17.1 is port management 17/1
|
|
--
|
|
-- tunnel(11), format: type.trunkid
|
|
-- e.g. 11.3 is trunk id 3
|
|
--
|
|
-- virtual management(12), format: type
|
|
-- e.g. 10 is the virtual management interface
|
|
"
|
|
SYNTAX OBJECT IDENTIFIER
|
|
|
|
|
|
|
|
|
|
InterfaceId2 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
-- This data type is used to specify an interface ID. The
|
|
-- first object identifier is port type, and the format of
|
|
-- the rest of the object identifiers depend on the port
|
|
-- type. Note that for types which include a reference to a
|
|
-- physical port, the formats vary according to the type of
|
|
-- port identifiers that the device uses (e.g. 6, 3/6, or
|
|
-- 2/3/6). New port type values will be added in the future
|
|
-- as needed. For a given type code, new formats may also
|
|
-- be added in the future. Each format for a given type
|
|
-- code will have a unique length. Applications should
|
|
-- check the OID length and not assume that it will match
|
|
-- one of the currently defined formats.
|
|
--
|
|
-- Though the OIDs are shown here in a shortened form, the
|
|
-- actual OIDs are prefixed with the OID of snInterfaceId
|
|
-- (so the OID for 1.2.3.6 would actually be
|
|
-- snInterfaceId.1.2.3.6, which is equivalent to
|
|
-- snEthernetInterface.2.3.6.).
|
|
--
|
|
-- ethernet(1), formats:
|
|
-- type.port (e.g. 1.6 is port ethernet 6)
|
|
-- type.slot.port (e.g. 1.3.6 is port ethernet 3/6)
|
|
-- type.unit.slot.port (e.g. 1.2.3.6 is port ethernet 2/3/6)
|
|
--
|
|
-- pos(2), formats:
|
|
-- type.port (e.g. 2.6 is port pos 6)
|
|
-- type.slot.port (e.g. 2.3.6 is port pos 3/6)
|
|
-- type.unit.slot.port (e.g. 2.2.3.6 is port pos 2/3/6)
|
|
--
|
|
-- atm(3), format: type.slot.port
|
|
-- type.port (e.g. 3.6 is port atm 6)
|
|
-- type.slot.port (e.g. 3.3.6 is port atm 3/6)
|
|
-- type.unit.slot.port (e.g. 3.2.3.6 is port atm 2/3/6)
|
|
--
|
|
-- virtual router interface(4), format: type.ve
|
|
-- e.g. 4.9 is port ve 9
|
|
--
|
|
-- loopback(5), format: type.lb
|
|
-- e.g. 5.7 is port loopback 7
|
|
--
|
|
-- gre tunnel(6), format: type.tn, not supported
|
|
--
|
|
-- subinterface(7), formats:
|
|
-- type.port.subInterface (e.g. 7.6.4 is port atm 6.4)
|
|
-- type.slot.port.subInterface (e.g. 7.3.6.4 is port atm 3/6.4)
|
|
-- type.unit.slot.port.subInterface
|
|
-- (e.g. 7.2.3.6.4 is port atm 2/3/6.4)
|
|
--
|
|
-- mpls tunnel(8), format: type.tn
|
|
-- e.g. 8.3 is port tunnel 3
|
|
--
|
|
-- pvc(9), formats:
|
|
-- type.port.subInterface.vpi.vci
|
|
-- (e.g. 9.6.2.1.2 is port atm 6.2.1.2)
|
|
-- type.slot.port.subInterface.vpi.vci
|
|
-- (e.g. 9.3.6.2.1.2 is port atm 3/6.2.1.2)
|
|
-- type.unit.slot.port.subInterface.vpi.vci
|
|
-- (e.g. 9.2.3.6.2.1.2 is port atm 2/3/6.2.1.2)
|
|
--
|
|
-- management(10), formats:
|
|
-- type.port (e.g. 10.1 is port management 1)
|
|
-- type.slot.port (e.g. 10.2.1 is port management 2/1)
|
|
-- type.unit.slot.port (e.g. 10.4.2.1 is port management 4/2/1)
|
|
--
|
|
-- trunk(11), format: type.trunkid
|
|
-- e.g. 11.3 is trunk id 3
|
|
--
|
|
-- virtual management(12), format: type
|
|
-- e.g. 12 is the virtual management interface
|
|
"
|
|
SYNTAX OBJECT IDENTIFIER
|
|
|
|
VlanTagMode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Vlan tag mode for a given vlan member."
|
|
SYNTAX INTEGER{
|
|
tagged(1),
|
|
untagged(2),
|
|
dual(3)
|
|
}
|
|
|
|
FdryVlanIdOrNoneTC ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN-ID that uniquely identifies a specific VLAN,
|
|
or no VLAN. The special value of zero is used to
|
|
indicate that no VLAN-ID is present or used. This can
|
|
be used in any situation where an object or a table entry
|
|
must refer either to a specific VLAN, or to no VLAN.
|
|
|
|
Note that a MIB object that is defined using this
|
|
TEXTUAL-CONVENTION should clarify the meaning of
|
|
'no VLAN' (i.e., the special value 0)."
|
|
SYNTAX Integer32 (0 | 1..4094)
|
|
|
|
BrcdVlanIdTC ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN-ID that uniquely identifies a specific VLAN."
|
|
SYNTAX Integer32 (1..4090)
|
|
|
|
PortQosTC ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port QOS Priority hardware queue. 0 is lowest priority, 7 is the highest."
|
|
SYNTAX INTEGER {
|
|
level0(0),
|
|
level1(1),
|
|
level2(2),
|
|
level3(3),
|
|
level4(4),
|
|
level5(5),
|
|
level6(6),
|
|
level7(7),
|
|
invalid(127)
|
|
}
|
|
|
|
|
|
PortPriorityTC ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Refers to the IEEE 802.1p priority, or Priority Code Point (PCP).
|
|
1 is the lowest, 8 is the highest. The value 128 may be used to
|
|
indicate invalid priority or priority is not enabled."
|
|
SYNTAX INTEGER {
|
|
priority0 (1),
|
|
priority1 (2),
|
|
priority2 (3),
|
|
priority3 (4),
|
|
priority4 (5),
|
|
priority5 (6),
|
|
priority6 (7),
|
|
priority7 (8),
|
|
nonPriority (128)
|
|
}
|
|
|
|
|
|
-- Groups
|
|
|
|
snSwInfo OBJECT IDENTIFIER ::= { snSwitch 1 }
|
|
snVLanInfo OBJECT IDENTIFIER ::= { snSwitch 2 }
|
|
snSwPortInfo OBJECT IDENTIFIER ::= { snSwitch 3 }
|
|
snFdbInfo OBJECT IDENTIFIER ::= { snSwitch 4 }
|
|
snPortStpInfo OBJECT IDENTIFIER ::= { snSwitch 5 }
|
|
snTrunkInfo OBJECT IDENTIFIER ::= { snSwitch 6 }
|
|
snSwSummary OBJECT IDENTIFIER ::= { snSwitch 7 }
|
|
snDhcpGatewayListInfo OBJECT IDENTIFIER ::= { snSwitch 8 }
|
|
snDnsInfo OBJECT IDENTIFIER ::= { snSwitch 9 }
|
|
snMacFilter OBJECT IDENTIFIER ::= { snSwitch 10 }
|
|
snNTP OBJECT IDENTIFIER ::= { snSwitch 11 }
|
|
snRadius OBJECT IDENTIFIER ::= { snSwitch 12 }
|
|
snTacacs OBJECT IDENTIFIER ::= { snSwitch 13 }
|
|
snQos OBJECT IDENTIFIER ::= { snSwitch 14 }
|
|
snAAA OBJECT IDENTIFIER ::= { snSwitch 15 }
|
|
snCAR OBJECT IDENTIFIER ::= { snSwitch 16 }
|
|
snVLanCAR OBJECT IDENTIFIER ::= { snSwitch 17 }
|
|
snNetFlow OBJECT IDENTIFIER ::= { snSwitch 18 }
|
|
snSFlow OBJECT IDENTIFIER ::= { snSwitch 19 }
|
|
snFDP OBJECT IDENTIFIER ::= { snSwitch 20 }
|
|
snVsrp OBJECT IDENTIFIER ::= { snSwitch 21 }
|
|
snArpInfo OBJECT IDENTIFIER ::= { snSwitch 22 }
|
|
snWireless OBJECT IDENTIFIER ::= { snSwitch 23 }
|
|
snMac OBJECT IDENTIFIER ::= { snSwitch 24 }
|
|
snPortMonitor OBJECT IDENTIFIER ::= { snSwitch 25 }
|
|
snSSH OBJECT IDENTIFIER ::= { snSwitch 26 }
|
|
snSSL OBJECT IDENTIFIER ::= { snSwitch 27 }
|
|
snMacAuth OBJECT IDENTIFIER ::= { snSwitch 28 }
|
|
snMetroRing OBJECT IDENTIFIER ::= { snSwitch 29 }
|
|
-- snSwitch 30 should not be used
|
|
snStacking OBJECT IDENTIFIER ::= { snSwitch 31 }
|
|
fdryMacVlanMIB OBJECT IDENTIFIER ::= { snSwitch 32 }
|
|
fdryLinkAggregationGroupMIB OBJECT IDENTIFIER ::= { snSwitch 33 }
|
|
fdryDns2MIB OBJECT IDENTIFIER ::= { snSwitch 34 }
|
|
fdryDaiMIB OBJECT IDENTIFIER ::= { snSwitch 35 }
|
|
fdryDhcpSnoopMIB OBJECT IDENTIFIER ::= { snSwitch 36 }
|
|
fdryIpSrcGuardMIB OBJECT IDENTIFIER ::= { snSwitch 37 }
|
|
-- snSwitch 38 used for brcdDot1xAuth MIB
|
|
|
|
-- SECTION 2: Switch Group Configuration MIBs
|
|
|
|
|
|
snSwGroupOperMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noVLan(1),
|
|
vlanByPort(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"noVLan(1) represents all switch ports with no virtual
|
|
LAN by port (no Port VLAN), and with no tag assigned.
|
|
vlanByPort(2) represents all switch ports with Basic
|
|
VLAN (layer2 Switch). "
|
|
::= { snSwInfo 1 }
|
|
|
|
snSwGroupIpL3SwMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Switch Group is configured with the Layer3
|
|
IP Switch mode either enabled or disabled and the
|
|
default is disabled mode.
|
|
enabled(1)...........activate Layer3 IP Switch
|
|
disabled(0)..........disable Layer3 IP Switch"
|
|
::= { snSwInfo 2 }
|
|
|
|
|
|
snSwGroupIpMcastMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Switch Group is configured with the IP Multicast
|
|
pruning mode either enabled or disabled and the
|
|
default is disabled mode.
|
|
enabled(1)...........activate IP Multicast pruning
|
|
disabled(0)..........no IP Multicast pruning"
|
|
::= { snSwInfo 3 }
|
|
|
|
|
|
snSwGroupDefaultCfgMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
default(1),
|
|
nonDefault(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Switch Group is configured with the Default
|
|
configuration. If the default configuration gets
|
|
overwritten, the state will change to non-default.
|
|
default(1)...........default configuration
|
|
nonDefault(2)..........non default configuration"
|
|
::= { snSwInfo 4 }
|
|
|
|
|
|
snSwGroupSwitchAgeTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Switch Age time is 180sec by default.
|
|
The configured range is 10 to 10,000sec. The time
|
|
represents the time span to age out an MAC Address
|
|
entry."
|
|
::= { snSwInfo 5 }
|
|
|
|
|
|
|
|
snVLanGroupVlanCurEntry OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current total entry number of VLANs are configured."
|
|
::= { snSwInfo 6 }
|
|
|
|
|
|
snVLanGroupSetAllVLan OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object is the VLanIndex of a particalur
|
|
entry in snVLanByPortCfgTable (snVLanByPortCfgVLanId).
|
|
All the attributes of that row of table except PortMask
|
|
will be used to set the same attributes for the
|
|
entire VLan group. VLanId and PortMask must be set for
|
|
that particular entry prior to setting this object.
|
|
Switch software will base on that VLAN information
|
|
to set the entire VLAN.
|
|
Note: All the intended attributes of the given
|
|
row of the table (given VLAN) must be set prior
|
|
setting this object. When this object is set,
|
|
Set-All-VLAN action will take place simultaneously.
|
|
The previous setting will be overwritten by the
|
|
new one."
|
|
::= { snSwInfo 7 }
|
|
|
|
|
|
snSwPortSetAll OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object is the index number of the
|
|
snSwPortInfoTable (snSwPortInfoPortIndex).
|
|
snSwPortInfoMonitorMode, snSwPortInfoTagMode,
|
|
snSwPortInfoChnMode, snSwPortInfoSpeed,
|
|
snSwPortInfoAdminStatus are all the
|
|
read-write attributes of that row of table.
|
|
They will be used to set the same attributes for
|
|
all the ports in the system.
|
|
Note: prior setting this object, all the intended
|
|
attributes of the given row of the table must be set.
|
|
Otherwise, the current data of the row will be used to
|
|
set the entire port-table. The previous setting will
|
|
be overwritten by the new one."
|
|
::= { snSwInfo 8 }
|
|
|
|
|
|
|
|
snFdbTableCurEntry OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current total entry number of FDB are configured."
|
|
::= { snSwInfo 9 }
|
|
|
|
|
|
snFdbTableStationFlush OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
error(2),
|
|
flush(3),
|
|
flushing(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The following values of the flush state
|
|
can only be read:
|
|
normal(1)... normal state
|
|
error(2)... operation failed
|
|
flushing(4)... in process
|
|
|
|
The following value can be written:
|
|
flush(3).....do flush
|
|
|
|
The agent will return a response even before the flush is done.
|
|
And the read value will be flushing until flush is done.
|
|
And the flush request will be rejected until error or normal."
|
|
::= { snSwInfo 10 }
|
|
|
|
|
|
snPortStpSetAll OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object is 1 which means invoking
|
|
Port STP Set-all command. The snPortStpPriority,
|
|
snPortStpPathCost, the read-write STP related
|
|
attributes of the first row of table will be used
|
|
to set the same attributes for all the ports in the
|
|
system.
|
|
Note: prior setting this object, all the intended
|
|
attributes of the given row of the table must be set.
|
|
Otherwise, the current data of the row will be used to
|
|
set the entire port-table. The previous setting will
|
|
be overwritten by the new one."
|
|
::= { snSwInfo 11 }
|
|
|
|
|
|
snSwProbePortNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A chassis switch probe port is operated as a traffic analyzer
|
|
port and only one port can be assigned in the chassis.
|
|
The bit 0 to bit 7: port number.
|
|
The bit 8 to bit 11: slot number.
|
|
A stackable switch is only assigned with one probe port as a
|
|
traffic analyzer."
|
|
::= { snSwInfo 12 }
|
|
|
|
|
|
snSw8021qTagMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Switch Group is configured with the IEEE802.1q
|
|
Tagging mode either enabled or disabled and the
|
|
default is disabled mode.
|
|
enabled(1)...........activate IEEE802.1q Tagging mode.
|
|
disabled(0)..........no IEEE802.1q Tagging."
|
|
::= { snSwInfo 13 }
|
|
|
|
|
|
snSwGlobalStpMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Spanning Tree System Global Mode in the Switch Group
|
|
can be set either enabled or disabled and the default is
|
|
enabled mode.
|
|
enabled(1)...........activate Spanning Tree
|
|
disabled(0)..........no Spanning Tree"
|
|
::= { snSwInfo 14 }
|
|
|
|
|
|
snSwIpMcastQuerierMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
querier(1),
|
|
nonQuerier(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Multicast pruning mode is configured either
|
|
Non-Querier or Querier mode and the default is
|
|
querier mode.
|
|
querier(1)...........when prunning traffic locally
|
|
within the VLAN.
|
|
nonQuerier(2)........when running with a multicast
|
|
capable router in the network."
|
|
::= { snSwInfo 15 }
|
|
|
|
snSwViolatorPortNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number of the switch or router that received
|
|
a violator packet. It is included in the locked
|
|
address violation trap.
|
|
The bit 0 to bit 7: port number.
|
|
The bit 8 to bit 11: slot number (slot for chassis only)."
|
|
::= { snSwInfo 17 }
|
|
|
|
snSwViolatorMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source address of the violator packet received
|
|
by the switch or router. It is included in the locked
|
|
address violation trap."
|
|
::= { snSwInfo 18 }
|
|
|
|
snVLanGroupVlanMaxEntry OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of VLAN entries that are allowed to configure.
|
|
|
|
On NetIron products, This object will be implemented as read-only.
|
|
Set request will be returned with not writable error.
|
|
To set the maximum allowed vlan, use snAgentSysParaConfigEntry."
|
|
::= { snSwInfo 19 }
|
|
|
|
snSwEosBufferSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A specific buffer size for all the different EOS buffers."
|
|
::= { snSwInfo 20 }
|
|
|
|
snVLanByPortEntrySize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The size of each VLAN table entry."
|
|
::= { snSwInfo 21 }
|
|
|
|
snSwPortEntrySize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The size of each port table entry."
|
|
::= { snSwInfo 22 }
|
|
|
|
snFdbStationEntrySize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The size of each Fdb station table entry."
|
|
::= { snSwInfo 23 }
|
|
|
|
snPortStpEntrySize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The size of each port stp table entry."
|
|
::= { snSwInfo 24 }
|
|
|
|
snSwEnableBridgeNewRootTrap OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the SNMP agent process is
|
|
permitted to generate bridge new root traps."
|
|
DEFVAL { enabled }
|
|
::= { snSwInfo 25 }
|
|
|
|
snSwEnableBridgeTopoChangeTrap OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the SNMP agent process is
|
|
permitted to generate bridge topology change
|
|
traps."
|
|
DEFVAL { enabled }
|
|
::= { snSwInfo 26 }
|
|
|
|
snSwEnableLockedAddrViolationTrap OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the SNMP agent process is
|
|
permitted to generate locked address violation
|
|
traps."
|
|
DEFVAL { enabled }
|
|
::= { snSwInfo 27 }
|
|
|
|
snSwIpxL3SwMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Switch Group is configured with the Layer3
|
|
IPX Switch mode either enabled or disabled and
|
|
the default is disabled mode.
|
|
enabled(1)...........activate Layer3 Switch
|
|
disabled(0)..........disable Layer3 Switch"
|
|
::= { snSwInfo 28 }
|
|
|
|
snVLanByIpSubnetMaxSubnets OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of subnets for each IP VLAN."
|
|
::= { snSwInfo 29 }
|
|
|
|
snVLanByIpxNetMaxNetworks OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of networks for each IPX VLAN."
|
|
::= { snSwInfo 30 }
|
|
|
|
snSwProtocolVLanMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"disabled(0) - represents system with Protocol VLAN disabled.
|
|
enabled(1) - represents system with Protocol VLAN enabled (Layer3 VLAN)."
|
|
::= { snSwInfo 31 }
|
|
|
|
snMacStationVLanId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4095)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This VLAN ID controls filtering of the Forwarding Database
|
|
table in the standard Bridge MIB (dot1dTpFdbTable). Since the
|
|
dot1dTpFdbTable contains MAC addresses associated with each of
|
|
the ports in the bridge, and each MAC address can be
|
|
associated with different VLANs, the snMacStationVLanId can be
|
|
used by users to specify which VLAN's MAC Station information
|
|
the dot1dTpFdbTable should provide. If this variable is set
|
|
to zero (the default value), all MAC station entries will be
|
|
returned when the dot1dTpFdbTable is retrieved. The
|
|
VLAN-aware dot1qTpFdbTable described in RFC 2674 should be
|
|
used as a replacement for this variable."
|
|
::= { snSwInfo 32 }
|
|
|
|
snSwClearCounters OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
valid(0),
|
|
clear(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"valid(0) - a SNMP-GET of this mib shows that it is valid command to use.
|
|
clear(1) - represents clear counter command of the following counters:
|
|
Dot3, MIB2, IP and IPX counters for all ports."
|
|
::= { snSwInfo 33 }
|
|
|
|
snSw8021qTagType OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IEEE802.1q tag type embedded in the length/type field of
|
|
an Ethernet packet. It specifies that the 2 octets after the
|
|
length/type field in an Ethernet packet is the tag value."
|
|
DEFVAL { 33024 }
|
|
::= { snSwInfo 34 }
|
|
|
|
snSwBroadcastLimit OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Limit the number of broadcast packets to forward out of the
|
|
switch ports. This object specifies the number of broadcast
|
|
packets per second. Setting a value of 0 to this object
|
|
disables the limitation check."
|
|
DEFVAL { 0 }
|
|
::= { snSwInfo 35 }
|
|
|
|
snSwMaxMacFilterPerSystem OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of MAC Filters per system in the MAC Filter table."
|
|
::= { snSwInfo 36 }
|
|
|
|
snSwMaxMacFilterPerPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of MAC Filters per port in the Port MAC Access Filter table."
|
|
::= { snSwInfo 37 }
|
|
|
|
snSwDefaultVLanId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4095)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID of the DEFAULT PORT-VLAN."
|
|
::= { snSwInfo 38 }
|
|
|
|
snSwGlobalAutoNegotiate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1),
|
|
negFullAuto(2),
|
|
other(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This feature only applies to Gigabit Ethernet ports. If set
|
|
to disable(0), all Gigabit Ethernet ports will be put to non-
|
|
negotiation mode. If set to enable(1), all Gigabit Ethernet
|
|
ports will start auto-negotiation indefinitely until succeed.
|
|
If set to negFullAuto(2), all Gigabit Ethernet ports will start
|
|
with auto-negotiation, if the negotiation failed, then they
|
|
will automatically switch to non-negotiation mode. Stackable
|
|
products (except TurboIron 8) Gigabit Ethernet ports do not
|
|
support negFullAuto(2). If the snSwPortInfoAutoNegotiate value
|
|
of a port was not set to global, this global value does not
|
|
apply to the negotiation mode of that port."
|
|
DEFVAL { negFullAuto }
|
|
::= { snSwInfo 39 }
|
|
|
|
snSwQosMechanism OBJECT-TYPE
|
|
SYNTAX INTEGER { strict(0), weighted(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the qos mechanism is
|
|
strict or weighted."
|
|
DEFVAL { weighted }
|
|
::= { snSwInfo 40 }
|
|
|
|
snSwSingleStpMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enableStp(1),
|
|
enableRstp(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Single Spanning Tree System Mode in the Switch Group
|
|
can be set either enabled or disabled and the default is
|
|
disabled mode.
|
|
disable(0)...........no Single Spanning Tree
|
|
enableStp(1).........activate SSTP control vlan to run Spanning Tree
|
|
enableRstp(2)........activate SSTP control vlan to run Rapid Spanning Tree"
|
|
::= { snSwInfo 41 }
|
|
|
|
snSwFastStpMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Fast Spanning Tree System Mode in the Switch Group
|
|
can be set either enabled or disabled and the default is
|
|
enabled mode.
|
|
enabled(1)...........activate Fast Spanning Tree
|
|
disabled(0)..........no Fast Spanning Tree"
|
|
::= { snSwInfo 42 }
|
|
|
|
snSwViolatorIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number of the switch or router that received
|
|
a violator packet. It is included in the locked
|
|
address violation trap."
|
|
::= { snSwInfo 43 }
|
|
|
|
snSwSingleStpVLanId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID of the Single Spanning Tree VLAN if Single
|
|
Spanning Tree was enabled. This object returns zero if
|
|
Single Spanning Tree was disabled."
|
|
::= { snSwInfo 44 }
|
|
|
|
|
|
-- VLAN Layer 2 Switch VLAN By Port Information Table
|
|
|
|
|
|
snVLanByPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnVLanByPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"If snSwGroupOperMode is configured as basic mode
|
|
which is VLAN by Port, Layer2 switching,
|
|
then this table is valid. Each VLAN switch port
|
|
could have a number of VLAN IDs."
|
|
::= { snVLanInfo 1 }
|
|
|
|
|
|
snVLanByPortEntry OBJECT-TYPE
|
|
SYNTAX SnVLanByPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"An entry in the VLAN By Port Information table.
|
|
snVLanByPortVLanIndex = 1 and with
|
|
snVLanByPortVLanId = 1 together implies all attributes
|
|
applying to the Global switch group i.e. noVLan.
|
|
A SNMP SET PDU for a row of the snVLanByPortTable
|
|
requires the entired sequence of the MIB Objects in each
|
|
snVLanByPortEntry stored in one PDU. Otherwise,
|
|
GENERR return-value will be returned."
|
|
INDEX {
|
|
snVLanByPortVLanIndex
|
|
}
|
|
::= { snVLanByPortTable 1 }
|
|
|
|
|
|
SnVLanByPortEntry ::= SEQUENCE {
|
|
snVLanByPortVLanIndex
|
|
INTEGER,
|
|
snVLanByPortVLanId
|
|
INTEGER,
|
|
snVLanByPortPortMask
|
|
PortMask,
|
|
snVLanByPortQos
|
|
INTEGER,
|
|
snVLanByPortStpMode
|
|
INTEGER,
|
|
snVLanByPortStpPriority
|
|
INTEGER,
|
|
snVLanByPortStpGroupMaxAge
|
|
INTEGER,
|
|
snVLanByPortStpGroupHelloTime
|
|
INTEGER,
|
|
snVLanByPortStpGroupForwardDelay
|
|
INTEGER,
|
|
snVLanByPortRowStatus
|
|
INTEGER,
|
|
snVLanByPortOperState
|
|
INTEGER,
|
|
snVLanByPortBaseNumPorts
|
|
Integer32,
|
|
snVLanByPortBaseType
|
|
INTEGER,
|
|
snVLanByPortStpProtocolSpecification
|
|
INTEGER,
|
|
snVLanByPortStpMaxAge
|
|
Timeout,
|
|
snVLanByPortStpHelloTime
|
|
Timeout,
|
|
snVLanByPortStpHoldTime
|
|
Integer32,
|
|
snVLanByPortStpForwardDelay
|
|
Timeout,
|
|
snVLanByPortStpTimeSinceTopologyChange
|
|
TimeTicks,
|
|
snVLanByPortStpTopChanges
|
|
Counter32,
|
|
snVLanByPortStpRootCost
|
|
Integer32,
|
|
snVLanByPortStpRootPort
|
|
Integer32,
|
|
snVLanByPortStpDesignatedRoot
|
|
BridgeId,
|
|
snVLanByPortBaseBridgeAddress
|
|
MacAddress,
|
|
snVLanByPortVLanName
|
|
DisplayString,
|
|
snVLanByPortRouterIntf
|
|
Integer32,
|
|
snVLanByPortChassisPortMask
|
|
OCTET STRING,
|
|
snVLanByPortPortList
|
|
OCTET STRING
|
|
}
|
|
|
|
snVLanByPortVLanIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4095)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The VLAN ID index must not be greater than the
|
|
snVLanGroupVlanMaxEntry. Each VLAN Identifier can
|
|
have a membership of multiple ports."
|
|
::= { snVLanByPortEntry 1 }
|
|
|
|
|
|
snVLanByPortVLanId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4095)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The VLAN ID index to the VLAN By Port Info Table.
|
|
Each VLAN Identifier can have a membership of multiple
|
|
ports."
|
|
::= { snVLanByPortEntry 2 }
|
|
|
|
|
|
snVLanByPortPortMask OBJECT-TYPE
|
|
SYNTAX PortMask
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The Standand-alone switch VLAN port membership. (It was obsoleted for Chassis Product)"
|
|
::= { snVLanByPortEntry 3 }
|
|
|
|
|
|
snVLanByPortQos OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
level0(0),
|
|
level1(1),
|
|
level2(2),
|
|
level3(3),
|
|
level4(4),
|
|
level5(5),
|
|
level6(6),
|
|
level7(7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The Stand alone stackable switch VLAN Priority values are:
|
|
low(0) -- low prority
|
|
high(1) -- high prority.
|
|
The BigIron switch VLAN Priority values are:
|
|
level0(0), level1(1), level2(2), level3(3),
|
|
level4(4), level5(5), level6(6), level7(7) "
|
|
::= { snVLanByPortEntry 4 }
|
|
|
|
snVLanByPortStpMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enableStp(1),
|
|
enableRstp(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Spanning Tree Mode in the Switch Group can be set
|
|
either enabled or disabled and the default is
|
|
enabled mode.
|
|
disable(0)...........no Spanning Tree
|
|
enableStp(1).........activate Spanning Tree
|
|
enableRstp(2)........activate Rapid Spanning Tree"
|
|
::= { snVLanByPortEntry 5 }
|
|
|
|
snVLanByPortStpPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"dot1dStpPriority : The value of the write-able
|
|
portion of the Stp ID, i.e., the first two octets
|
|
of the (8 octet long) Bridge ID. The other (last) 6
|
|
octets of the Bridge ID are given by the value of the
|
|
base bridge address - dot1dBaseBridgeAddress."
|
|
::= { snVLanByPortEntry 6 }
|
|
|
|
snVLanByPortStpGroupMaxAge OBJECT-TYPE
|
|
SYNTAX INTEGER (0..40)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"dot1dStpBridgeMaxAge: From RFC1493(Bridge MIB).
|
|
The value that all bridges use for MaxAge when
|
|
this bridge is acting as the root.
|
|
Note that 802.1D-1990 specifies that the
|
|
range for this parameter is related to the value of
|
|
dot1dStpBridgeHelloTime. The granularity of this
|
|
timer is specified by 802.1D-1990 to be 1 second.
|
|
An agent may return a badValue error if a set is
|
|
attempted to a value which is not a whole number
|
|
of seconds."
|
|
::= { snVLanByPortEntry 7 }
|
|
|
|
snVLanByPortStpGroupHelloTime OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"dot1dStpBridgeHelloTime: From RFC1493(Bridge MIB).
|
|
The value that all bridges use for HelloTime when
|
|
this bridge is acting as the root. The
|
|
granularity of this timer is specified by 802.1D-
|
|
1990 to be 1 second. An agent may return a
|
|
badValue error if a set is attempted to a value
|
|
which is not a whole number of seconds."
|
|
::= { snVLanByPortEntry 8 }
|
|
|
|
snVLanByPortStpGroupForwardDelay OBJECT-TYPE
|
|
SYNTAX INTEGER (0..30)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"dot1dStpBridgeForwardDelay : From RFC1493(Bridge MIB).
|
|
The value that all bridges use for ForwardDelay
|
|
when this bridge is acting as the root. Note that
|
|
802.1D-1990 specifies that the range for this
|
|
parameter is related to the value of
|
|
dot1dStpBridgeMaxAge. The granularity of this
|
|
timer is specified by 802.1D-1990 to be 1 second.
|
|
An agent may return a badValue error if a set is
|
|
attempted to a value which is not a whole number
|
|
of seconds."
|
|
::= { snVLanByPortEntry 9 }
|
|
|
|
snVLanByPortRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
valid(2),
|
|
delete(3),
|
|
create(4),
|
|
modify(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object is used to create and
|
|
delete row in the table and control
|
|
if they are used. The values
|
|
that can be written are:
|
|
delete(3)...deletes the row
|
|
create(4)...creates a new row
|
|
modify(5)...modifies an exsisting row
|
|
|
|
If the row exists, then a SET with
|
|
value of create(4) returns error
|
|
'badValue'. Deleted rows go away
|
|
immediately. The following values
|
|
can be returned on reads:
|
|
noSuch(0)...no such row
|
|
other(1)....some other case
|
|
valid(2)....the row exists and is valid"
|
|
::= { snVLanByPortEntry 10 }
|
|
|
|
snVLanByPortOperState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notActivated(0),
|
|
activated(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"By default, this mode is set to notActivated(0).
|
|
notActivated(0)...the VLAN entry is not activated and not in running mode.
|
|
activated(1)......the VLAN entry is activated and in running mode"
|
|
::= { snVLanByPortEntry 11 }
|
|
|
|
snVLanByPortBaseNumPorts OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of ports controlled by this bridging
|
|
entity."
|
|
::= { snVLanByPortEntry 12 }
|
|
|
|
snVLanByPortBaseType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
transparentOnly(2),
|
|
sourcerouteOnly(3),
|
|
srt(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Indicates what type of bridging this bridge can
|
|
perform. If a bridge is actually performing a
|
|
certain type of bridging this will be indicated by
|
|
entries in the port table for the given type."
|
|
::= { snVLanByPortEntry 13 }
|
|
|
|
snVLanByPortStpProtocolSpecification OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
decLb100(2),
|
|
ieee8021d(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"An indication of what version of the Spanning
|
|
Tree Protocol is being run. The value
|
|
'decLb100(2)' indicates the DEC LANbridge 100
|
|
Spanning Tree protocol. IEEE 802.1d
|
|
implementations will return 'ieee8021d(3)'. If
|
|
future versions of the IEEE Spanning Tree Protocol
|
|
are released that are incompatible with the
|
|
current version a new value will be defined."
|
|
::= { snVLanByPortEntry 14 }
|
|
|
|
|
|
snVLanByPortStpMaxAge OBJECT-TYPE
|
|
SYNTAX Timeout
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"dot1dStpMaxAge: From RFC1493(Bridge MIB).
|
|
The maximum age of Spanning Tree Protocol
|
|
information learned from the network on any port
|
|
before it is discarded, in units of hundredths of
|
|
a second. This is the actual value that this
|
|
bridge is currently using."
|
|
::= { snVLanByPortEntry 15 }
|
|
|
|
snVLanByPortStpHelloTime OBJECT-TYPE
|
|
SYNTAX Timeout
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"dot1dStpHelloTime: From RFC1493(Bridge MIB).
|
|
The amount of time between the transmission of
|
|
Configuration bridge PDUs by this node on any port
|
|
when it is the root of the spanning tree or trying
|
|
to become so, in units of hundredths of a second.
|
|
This is the actual value that this bridge is
|
|
currently using."
|
|
::= { snVLanByPortEntry 16 }
|
|
|
|
snVLanByPortStpHoldTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"dot1dStpHoldTime: From RFC1493(Bridge MIB).
|
|
This time value determines the interval length
|
|
during which no more than two Configuration bridge
|
|
PDUs shall be transmitted by this node, in units
|
|
of hundredths of a second."
|
|
::= { snVLanByPortEntry 17 }
|
|
|
|
snVLanByPortStpForwardDelay OBJECT-TYPE
|
|
SYNTAX Timeout
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"dot1dStpForwardDelay: From RFC1493(Bridge MIB).
|
|
This time value, measured in units of hundredths
|
|
of a second, controls how fast a port changes its
|
|
spanning state when moving towards the Forwarding
|
|
state. The value determines how long the port
|
|
stays in each of the Listening and Learning
|
|
states, which precede the Forwarding state. This
|
|
value is also used, when a topology change has
|
|
been detected and is underway, to age all dynamic
|
|
entries in the Forwarding Database. [Note that
|
|
this value is the one that this bridge is
|
|
currently using, in contrast to
|
|
dot1dStpBridgeForwardDelay which is the value that
|
|
this bridge and all others would start using
|
|
if/when this bridge were to become the root.]"
|
|
::= { snVLanByPortEntry 18 }
|
|
|
|
|
|
snVLanByPortStpTimeSinceTopologyChange OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The time (in hundredths of a second) since the
|
|
last time a topology change was detected by the
|
|
bridge entity."
|
|
::= { snVLanByPortEntry 19 }
|
|
|
|
snVLanByPortStpTopChanges OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The total number of topology changes detected by
|
|
this bridge since the management entity was last
|
|
reset or initialized."
|
|
::= { snVLanByPortEntry 20 }
|
|
|
|
snVLanByPortStpRootCost OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"dot1dStpRootCost: From RFC1493(Bridge MIB).
|
|
The cost of the path to the root as seen from
|
|
this bridge."
|
|
::= { snVLanByPortEntry 21 }
|
|
|
|
snVLanByPortStpRootPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"dot1dStpRootPort: From RFC1493(Bridge MIB).
|
|
The port number of the port which offers the
|
|
lowest cost path from this bridge to the root
|
|
bridge."
|
|
::= { snVLanByPortEntry 22 }
|
|
|
|
snVLanByPortStpDesignatedRoot OBJECT-TYPE
|
|
SYNTAX BridgeId
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"dot1dStpDesignatedRoot: From RFC1493(Bridge MIB).
|
|
The bridge identifier of the root of the spanning
|
|
tree as determined by the Spanning Tree Protocol
|
|
as executed by this node. This value is used as
|
|
the Root Identifier parameter in all Configuration
|
|
Bridge PDUs originated by this node."
|
|
::= { snVLanByPortEntry 23 }
|
|
|
|
snVLanByPortBaseBridgeAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The MAC address used by this bridge when it must
|
|
be referred to in a unique fashion. It is
|
|
recommended that this be the numerically smallest
|
|
MAC address of all ports that belong to this
|
|
bridge. However it is only required to be unique.
|
|
When concatenated with dot1dStpPriority a unique
|
|
BridgeIdentifier is formed which is used in the
|
|
Spanning Tree Protocol."
|
|
::= { snVLanByPortEntry 24 }
|
|
|
|
snVLanByPortVLanName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"VLAN Community Name string."
|
|
::= { snVLanByPortEntry 25 }
|
|
|
|
|
|
snVLanByPortRouterIntf OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Optional: A virtual interface for router to the VLAN -- applied to router only.
|
|
If a SNMP-Get value is zero, that means this object was not configured."
|
|
::= { snVLanByPortEntry 26 }
|
|
|
|
|
|
snVLanByPortChassisPortMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The Chassis VLAN switch port membership.
|
|
(It was obsoleted after release 07100, replaced by snVLanByPortPortList)"
|
|
::= { snVLanByPortEntry 27 }
|
|
|
|
snVLanByPortPortList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A list of port indices which are the port
|
|
membership of a VLAN By Port. Each port index is a
|
|
16-bit integer in big endian order. 8-bit is the slot number,
|
|
the other 8-bit is the port number."
|
|
::= { snVLanByPortEntry 28 }
|
|
|
|
|
|
-- Port VLAN (Layer 2 VLAN) Port Membership Table
|
|
-- Use this table to create or delete a VLAN entry
|
|
|
|
|
|
snVLanByPortMemberTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnVLanByPortMemberEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port VLAN (Layer 2 VLAN) port membership table."
|
|
::= { snVLanInfo 6 }
|
|
|
|
|
|
snVLanByPortMemberEntry OBJECT-TYPE
|
|
SYNTAX SnVLanByPortMemberEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of the port VLAN membership table."
|
|
INDEX { snVLanByPortMemberVLanId, snVLanByPortMemberPortId }
|
|
::= { snVLanByPortMemberTable 1 }
|
|
|
|
SnVLanByPortMemberEntry ::= SEQUENCE {
|
|
snVLanByPortMemberVLanId
|
|
INTEGER,
|
|
snVLanByPortMemberPortId
|
|
InterfaceIndex,
|
|
snVLanByPortMemberRowStatus
|
|
INTEGER,
|
|
snVLanByPortMemberTagMode
|
|
INTEGER
|
|
}
|
|
|
|
snVLanByPortMemberVLanId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4095)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN identifier (VLAN ID)."
|
|
::= { snVLanByPortMemberEntry 1 }
|
|
|
|
snVLanByPortMemberPortId OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex which is a member of the port VLAN."
|
|
::= { snVLanByPortMemberEntry 2 }
|
|
|
|
snVLanByPortMemberRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
valid(2),
|
|
delete(3),
|
|
create(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create and
|
|
delete row in the table and control
|
|
if they are used. The values
|
|
that can be written are:
|
|
delete(3)...deletes the row
|
|
create(4)...creates a new row
|
|
|
|
If the row exists, then a SET with
|
|
value of create(4) returns error
|
|
'badValue'. Deleted rows go away
|
|
immediately. The following values
|
|
can be returned on reads:
|
|
noSuch(0)...no such row
|
|
other(1)....some other case
|
|
valid(2)....the row exists and is valid"
|
|
::= { snVLanByPortMemberEntry 3 }
|
|
|
|
snVLanByPortMemberTagMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tagged(1),
|
|
untagged(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For tagged/dual-mode port, we could have multiple VLANs per
|
|
port. For untagged port, there is only one VLAN ID per port."
|
|
::= { snVLanByPortMemberEntry 4 }
|
|
|
|
|
|
-- Port VLAN (Layer 2 VLAN) Configuration Table
|
|
-- Use this table to configure a VLAN entry
|
|
|
|
|
|
snVLanByPortCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnVLanByPortCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port VLAN (Layer 2 VLAN) configuration table."
|
|
::= { snVLanInfo 7 }
|
|
|
|
|
|
snVLanByPortCfgEntry OBJECT-TYPE
|
|
SYNTAX SnVLanByPortCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of the port VLAN configuration table."
|
|
INDEX { snVLanByPortCfgVLanId }
|
|
::= { snVLanByPortCfgTable 1 }
|
|
|
|
|
|
SnVLanByPortCfgEntry ::= SEQUENCE {
|
|
snVLanByPortCfgVLanId
|
|
INTEGER,
|
|
snVLanByPortCfgQos
|
|
PortQosTC,
|
|
snVLanByPortCfgStpMode
|
|
INTEGER,
|
|
snVLanByPortCfgStpPriority
|
|
INTEGER,
|
|
snVLanByPortCfgStpGroupMaxAge
|
|
Integer32,
|
|
snVLanByPortCfgStpGroupHelloTime
|
|
Integer32,
|
|
snVLanByPortCfgStpGroupForwardDelay
|
|
Integer32,
|
|
snVLanByPortCfgBaseNumPorts
|
|
Integer32,
|
|
snVLanByPortCfgBaseType
|
|
INTEGER,
|
|
snVLanByPortCfgStpProtocolSpecification
|
|
INTEGER,
|
|
snVLanByPortCfgStpMaxAge
|
|
Timeout,
|
|
snVLanByPortCfgStpHelloTime
|
|
Timeout,
|
|
snVLanByPortCfgStpHoldTime
|
|
Integer32,
|
|
snVLanByPortCfgStpForwardDelay
|
|
Timeout,
|
|
snVLanByPortCfgStpTimeSinceTopologyChange
|
|
TimeTicks,
|
|
snVLanByPortCfgStpTopChanges
|
|
Counter32,
|
|
snVLanByPortCfgStpRootCost
|
|
Integer32,
|
|
snVLanByPortCfgStpRootPort
|
|
Integer32,
|
|
snVLanByPortCfgStpDesignatedRoot
|
|
BridgeId,
|
|
snVLanByPortCfgBaseBridgeAddress
|
|
MacAddress,
|
|
snVLanByPortCfgVLanName
|
|
DisplayString,
|
|
snVLanByPortCfgRouterIntf
|
|
Integer32,
|
|
snVLanByPortCfgRowStatus
|
|
INTEGER,
|
|
snVLanByPortCfgStpVersion
|
|
INTEGER,
|
|
snVLanByPortCfgInOctets
|
|
Counter64
|
|
}
|
|
|
|
snVLanByPortCfgVLanId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4095)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN identifier (VLAN ID)."
|
|
::= { snVLanByPortCfgEntry 1 }
|
|
|
|
snVLanByPortCfgQos OBJECT-TYPE
|
|
SYNTAX PortQosTC
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Stand alone stackable switch VLAN Priority values are:
|
|
level0(0) -- low prority
|
|
level1(1) -- high prority.
|
|
The BigIron switch VLAN Priority values are:
|
|
level0(0), level1(1), level2(2), level3(3),
|
|
level4(4), level5(5), level6(6), level7(7).
|
|
Value invalid(127) is used by CES/CER products to signify
|
|
that no QoS was specified for this VLAN."
|
|
::= { snVLanByPortCfgEntry 2 }
|
|
|
|
snVLanByPortCfgStpMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enableStp(1),
|
|
enableRstp(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Spanning Tree Mode in the Switch Group can be set
|
|
either enabled or disabled and the default is
|
|
enabled mode.
|
|
disable(0)...........no Spanning Tree
|
|
enableStp(1).........activate Spanning Tree
|
|
enableRstp(2)........activate Rapid Spanning Tree"
|
|
::= { snVLanByPortCfgEntry 3 }
|
|
|
|
snVLanByPortCfgStpPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"dot1dStpPriority : The value of the write-able
|
|
portion of the Stp ID, i.e., the first two octets
|
|
of the (8 octet long) Bridge ID. The other (last) 6
|
|
octets of the Bridge ID are given by the value of the
|
|
base bridge address - dot1dBaseBridgeAddress."
|
|
::= { snVLanByPortCfgEntry 4 }
|
|
|
|
snVLanByPortCfgStpGroupMaxAge OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"dot1dStpBridgeMaxAge: From RFC1493(Bridge MIB).
|
|
The value that all bridges use for MaxAge when
|
|
this bridge is acting as the root.
|
|
Note that 802.1D-1990 specifies that the
|
|
range for this parameter is related to the value of
|
|
dot1dStpBridgeHelloTime. The granularity of this
|
|
timer is specified by 802.1D-1990 to be 1 second.
|
|
An agent may return a badValue error if a set is
|
|
attempted to a value which is not a whole number
|
|
of seconds.
|
|
Valid value betweek 6 and 40. Default is 20 seconds.
|
|
Value 0 is returned if no STP is not configured for this vlan."
|
|
::= { snVLanByPortCfgEntry 5 }
|
|
|
|
snVLanByPortCfgStpGroupHelloTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"dot1dStpBridgeHelloTime: From RFC1493(Bridge MIB).
|
|
The value that all bridges use for HelloTime when
|
|
this bridge is acting as the root. The
|
|
granularity of this timer is specified by 802.1D-
|
|
1990 to be 1 second. An agent may return a
|
|
badValue error if a set is attempted to a value
|
|
which is not a whole number of seconds.
|
|
Valid value betweek 1 and 10. Default is 2 seconds.
|
|
Value 0 is returned if no STP is not configured for this vlan."
|
|
::= { snVLanByPortCfgEntry 6 }
|
|
|
|
snVLanByPortCfgStpGroupForwardDelay OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"dot1dStpBridgeForwardDelay : From RFC1493(Bridge MIB).
|
|
The value that all bridges use for ForwardDelay
|
|
when this bridge is acting as the root. Note that
|
|
802.1D-1990 specifies that the range for this
|
|
parameter is related to the value of
|
|
dot1dStpBridgeMaxAge. The granularity of this
|
|
timer is specified by 802.1D-1990 to be 1 second.
|
|
An agent may return a badValue error if a set is
|
|
attempted to a value which is not a whole number
|
|
of seconds.
|
|
Valid value betweek 2 and 30. Default is 15 seconds.
|
|
Value 0 is returned if no STP is not configured for this vlan."
|
|
::= { snVLanByPortCfgEntry 7 }
|
|
|
|
snVLanByPortCfgBaseNumPorts OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ports controlled by this bridging
|
|
entity."
|
|
::= { snVLanByPortCfgEntry 8 }
|
|
|
|
snVLanByPortCfgBaseType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
transparentOnly(2),
|
|
sourcerouteOnly(3),
|
|
srt(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates what type of bridging this bridge can
|
|
perform. If a bridge is actually performing a
|
|
certain type of bridging this will be indicated by
|
|
entries in the port table for the given type."
|
|
::= { snVLanByPortCfgEntry 9 }
|
|
|
|
snVLanByPortCfgStpProtocolSpecification OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
decLb100(2),
|
|
ieee8021d(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An indication of what version of the Spanning
|
|
Tree Protocol is being run. The value
|
|
'decLb100(2)' indicates the DEC LANbridge 100
|
|
Spanning Tree protocol. IEEE 802.1d
|
|
implementations will return 'ieee8021d(3)'. If
|
|
future versions of the IEEE Spanning Tree Protocol
|
|
are released that are incompatible with the
|
|
current version a new value will be defined."
|
|
::= { snVLanByPortCfgEntry 10 }
|
|
|
|
|
|
snVLanByPortCfgStpMaxAge OBJECT-TYPE
|
|
SYNTAX Timeout
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"dot1dStpMaxAge: From RFC1493(Bridge MIB).
|
|
The maximum age of Spanning Tree Protocol
|
|
information learned from the network on any port
|
|
before it is discarded, in units of hundredths of
|
|
a second. This is the actual value that this
|
|
bridge is currently using."
|
|
::= { snVLanByPortCfgEntry 11 }
|
|
|
|
snVLanByPortCfgStpHelloTime OBJECT-TYPE
|
|
SYNTAX Timeout
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"dot1dStpHelloTime: From RFC1493(Bridge MIB).
|
|
The amount of time between the transmission of
|
|
Configuration bridge PDUs by this node on any port
|
|
when it is the root of the spanning tree or trying
|
|
to become so, in units of hundredths of a second.
|
|
This is the actual value that this bridge is
|
|
currently using."
|
|
::= { snVLanByPortCfgEntry 12 }
|
|
|
|
snVLanByPortCfgStpHoldTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"dot1dStpHoldTime: From RFC1493(Bridge MIB).
|
|
This time value determines the interval length
|
|
during which no more than two Configuration bridge
|
|
PDUs shall be transmitted by this node, in units
|
|
of hundredths of a second."
|
|
::= { snVLanByPortCfgEntry 13 }
|
|
|
|
snVLanByPortCfgStpForwardDelay OBJECT-TYPE
|
|
SYNTAX Timeout
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"dot1dStpForwardDelay: From RFC1493(Bridge MIB).
|
|
This time value, measured in units of hundredths
|
|
of a second, controls how fast a port changes its
|
|
spanning state when moving towards the Forwarding
|
|
state. The value determines how long the port
|
|
stays in each of the Listening and Learning
|
|
states, which precede the Forwarding state. This
|
|
value is also used, when a topology change has
|
|
been detected and is underway, to age all dynamic
|
|
entries in the Forwarding Database. [Note that
|
|
this value is the one that this bridge is
|
|
currently using, in contrast to
|
|
dot1dStpBridgeForwardDelay which is the value that
|
|
this bridge and all others would start using
|
|
if/when this bridge were to become the root.]"
|
|
::= { snVLanByPortCfgEntry 14 }
|
|
|
|
|
|
snVLanByPortCfgStpTimeSinceTopologyChange OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time (in hundredths of a second) since the
|
|
last time a topology change was detected by the
|
|
bridge entity."
|
|
::= { snVLanByPortCfgEntry 15 }
|
|
|
|
snVLanByPortCfgStpTopChanges OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of topology changes detected by
|
|
this bridge since the management entity was last
|
|
reset or initialized."
|
|
::= { snVLanByPortCfgEntry 16 }
|
|
|
|
snVLanByPortCfgStpRootCost OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"dot1dStpRootCost: From RFC1493(Bridge MIB).
|
|
The cost of the path to the root as seen from
|
|
this bridge."
|
|
::= { snVLanByPortCfgEntry 17 }
|
|
|
|
snVLanByPortCfgStpRootPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"dot1dStpRootPort: From RFC1493(Bridge MIB).
|
|
The port number of the port which offers the
|
|
lowest cost path from this bridge to the root
|
|
bridge."
|
|
::= { snVLanByPortCfgEntry 18 }
|
|
|
|
snVLanByPortCfgStpDesignatedRoot OBJECT-TYPE
|
|
SYNTAX BridgeId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"dot1dStpDesignatedRoot: From RFC1493(Bridge MIB).
|
|
The bridge identifier of the root of the spanning
|
|
tree as determined by the Spanning Tree Protocol
|
|
as executed by this node. This value is used as
|
|
the Root Identifier parameter in all Configuration
|
|
Bridge PDUs originated by this node."
|
|
::= { snVLanByPortCfgEntry 19 }
|
|
|
|
snVLanByPortCfgBaseBridgeAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address used by this bridge when it must
|
|
be referred to in a unique fashion. It is
|
|
recommended that this be the numerically smallest
|
|
MAC address of all ports that belong to this
|
|
bridge. However it is only required to be unique.
|
|
When concatenated with dot1dStpPriority a unique
|
|
BridgeIdentifier is formed which is used in the
|
|
Spanning Tree Protocol."
|
|
::= { snVLanByPortCfgEntry 20 }
|
|
|
|
snVLanByPortCfgVLanName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN Community Name string."
|
|
::= { snVLanByPortCfgEntry 21 }
|
|
|
|
|
|
snVLanByPortCfgRouterIntf OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Optional: A virtual interface for router to the VLAN -- applied to router only.
|
|
If a SNMP-Get value is zero, that means this object was not configured."
|
|
::= { snVLanByPortCfgEntry 22 }
|
|
|
|
snVLanByPortCfgRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
valid(2),
|
|
delete(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Use this object to delete a vlan entry.
|
|
For read operation, its value is 'valid' if it is a user-configured VLAN and
|
|
'other' if it is a control-VLAN."
|
|
::= { snVLanByPortCfgEntry 23 }
|
|
|
|
snVLanByPortCfgStpVersion OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
stpCompatible(0),
|
|
rstp(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The version of Spanning Tree Protocol the bridge is
|
|
currently running. The value 'stpCompatible(0)'
|
|
indicates the Spanning Tree Protocol specified in
|
|
IEEE 802.1D and 'rstp(2)' indicates the Rapid Spanning
|
|
Tree Protocol specified in IEEE 802.1w. New value may
|
|
be defined as future versions of the protocol become
|
|
available."
|
|
::= { snVLanByPortCfgEntry 24 }
|
|
|
|
snVLanByPortCfgInOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bytes received on this VLAN. This can be used as the per VE
|
|
couter, if there is one-to-one map for VLAN-VE."
|
|
::= { snVLanByPortCfgEntry 25 }
|
|
|
|
|
|
--
|
|
--
|
|
|
|
brcdVlanExtStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BrcdVlanExtStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the extended statistics for VLAN ports of G2 cards.
|
|
These applies to L2 VLANs and as well as port VLANs that are associated to
|
|
IP interfaces (physical or VE)."
|
|
::= { snVLanInfo 8 }
|
|
|
|
brcdVlanExtStatsEntry OBJECT-TYPE
|
|
SYNTAX BrcdVlanExtStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in this table represents a VLAN extended statistics
|
|
accounting entry. It can be a per-VLAN/port entry,
|
|
in this case the Priority-ID is 128 (invalid).
|
|
It can also be in a priority level granularity of the VLAN port,
|
|
in this case the Priority-ID specifies which port QOS priority,
|
|
and Priority-ID 128 is the index to the aggregate count bucket."
|
|
INDEX {brcdVlanExtStatsVlanId,
|
|
brcdVlanExtStatsIfIndex,
|
|
brcdVlanExtStatsPriorityId }
|
|
::= { brcdVlanExtStatsTable 1 }
|
|
|
|
BrcdVlanExtStatsEntry ::= SEQUENCE {
|
|
brcdVlanExtStatsVlanId
|
|
BrcdVlanIdTC,
|
|
brcdVlanExtStatsIfIndex
|
|
InterfaceIndex,
|
|
brcdVlanExtStatsPriorityId
|
|
PortPriorityTC,
|
|
brcdVlanExtStatsInSwitchedPkts
|
|
Counter64,
|
|
brcdVlanExtStatsInRoutedPkts
|
|
Counter64,
|
|
brcdVlanExtStatsInPkts
|
|
Counter64,
|
|
brcdVlanExtStatsOutSwitchedPkts
|
|
Counter64,
|
|
brcdVlanExtStatsOutRoutedPkts
|
|
Counter64,
|
|
brcdVlanExtStatsOutPkts
|
|
Counter64,
|
|
brcdVlanExtStatsInSwitchedOctets
|
|
Counter64,
|
|
brcdVlanExtStatsInRoutedOctets
|
|
Counter64,
|
|
brcdVlanExtStatsInOctets
|
|
Counter64,
|
|
brcdVlanExtStatsOutSwitchedOctets
|
|
Counter64,
|
|
brcdVlanExtStatsOutRoutedOctets
|
|
Counter64,
|
|
brcdVlanExtStatsOutOctets
|
|
Counter64
|
|
}
|
|
|
|
brcdVlanExtStatsVlanId OBJECT-TYPE
|
|
SYNTAX BrcdVlanIdTC
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN identifier (VLAN ID)."
|
|
::= { brcdVlanExtStatsEntry 1 }
|
|
|
|
brcdVlanExtStatsIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex of the port belonging to this VLAN."
|
|
::= { brcdVlanExtStatsEntry 2 }
|
|
|
|
brcdVlanExtStatsPriorityId OBJECT-TYPE
|
|
SYNTAX PortPriorityTC
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the port QOS priority.
|
|
The values 1 through 8 internally maps to priorities 0 through 7.
|
|
The value 128 indicates that priority-level accounting is not enabled"
|
|
::= { brcdVlanExtStatsEntry 3 }
|
|
|
|
brcdVlanExtStatsInSwitchedPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of valid frames received by this port classified as belonging
|
|
to this VLAN for switched packets. The value is applicable only if the
|
|
system was configured to separately count the two types of packets.
|
|
Otherwise, it returns 0."
|
|
::= { brcdVlanExtStatsEntry 4 }
|
|
|
|
brcdVlanExtStatsInRoutedPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The number of valid frames received by this port classified as belonging
|
|
to this VLAN for routed packets. The value is applicable only if the system
|
|
was configured to separately count the two types of packets.
|
|
Otherwise, it returns 0."
|
|
::= { brcdVlanExtStatsEntry 5 }
|
|
|
|
brcdVlanExtStatsInPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of valid frames received by this port classified as belonging
|
|
to this VLAN for both switched and routed packets."
|
|
::= { brcdVlanExtStatsEntry 6 }
|
|
|
|
brcdVlanExtStatsOutSwitchedPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of valid frames transmitted by this port
|
|
classified as belonging to this VLAN for switched packets.
|
|
The value is applicable only if the system was configured
|
|
to separately count the two types of packets.
|
|
Otherwise, it returns 0."
|
|
::= { brcdVlanExtStatsEntry 7 }
|
|
|
|
brcdVlanExtStatsOutRoutedPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of valid frames transmitted by this port classified
|
|
as belonging to this VLAN for routed packets. The value is
|
|
applicable only if the system was configured to separately
|
|
count the two types of packets. Otherwise, it returns 0."
|
|
::= { brcdVlanExtStatsEntry 8 }
|
|
|
|
brcdVlanExtStatsOutPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of valid frames transmitted by this port classified
|
|
as belonging to this VLAN for both switched and routed packets."
|
|
::= { brcdVlanExtStatsEntry 9 }
|
|
|
|
brcdVlanExtStatsInSwitchedOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bytes count received by this port classified as
|
|
belonging to this VLAN for switched packets. The value
|
|
is applicable only if the system was configured to
|
|
separately count the two types of packets.
|
|
Otherwise, it returns 0."
|
|
::= { brcdVlanExtStatsEntry 10 }
|
|
|
|
brcdVlanExtStatsInRoutedOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bytes count received by this port classified as
|
|
belonging to this VLAN for routed packets. The value
|
|
is applicable only if the system was configured to
|
|
separately count the two types of packets.
|
|
Otherwise, it returns 0."
|
|
::= { brcdVlanExtStatsEntry 11 }
|
|
|
|
brcdVlanExtStatsInOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bytes count received by this port classified
|
|
as belonging to this VLAN for both switched and
|
|
routed packets. "
|
|
::= { brcdVlanExtStatsEntry 12 }
|
|
|
|
brcdVlanExtStatsOutSwitchedOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bytes count transmitted by this port classified
|
|
as belonging to this VLAN for switched packets.
|
|
The value is applicable only if the system was configured
|
|
to separately count the two types of packets.
|
|
Otherwise, it returns 0."
|
|
::= { brcdVlanExtStatsEntry 13 }
|
|
|
|
brcdVlanExtStatsOutRoutedOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bytes count transmitted by this port classified
|
|
as belonging to this VLAN for routed packets.
|
|
The value is applicable only if the system was configured
|
|
to separately count the two types of packets.
|
|
Otherwise, it returns 0."
|
|
::= { brcdVlanExtStatsEntry 14 }
|
|
|
|
brcdVlanExtStatsOutOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bytes count transmitted by this port classified
|
|
as belonging to this VLAN for both switched and
|
|
routed packets. "
|
|
::= { brcdVlanExtStatsEntry 15 }
|
|
|
|
|
|
-- VLAN by Protocol Configuration Table
|
|
|
|
|
|
snVLanByProtocolTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnVLanByProtocolEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { snVLanInfo 2 }
|
|
|
|
|
|
snVLanByProtocolEntry OBJECT-TYPE
|
|
SYNTAX SnVLanByProtocolEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the VLAN By Protocol Configuration table. "
|
|
INDEX {
|
|
snVLanByProtocolVLanId,
|
|
snVLanByProtocolIndex
|
|
}
|
|
::= { snVLanByProtocolTable 1 }
|
|
|
|
|
|
SnVLanByProtocolEntry ::= SEQUENCE {
|
|
snVLanByProtocolVLanId
|
|
INTEGER,
|
|
snVLanByProtocolIndex
|
|
INTEGER,
|
|
snVLanByProtocolDynamic
|
|
INTEGER,
|
|
snVLanByProtocolStaticMask
|
|
PortMask,
|
|
snVLanByProtocolExcludeMask
|
|
PortMask,
|
|
snVLanByProtocolRouterIntf
|
|
INTEGER,
|
|
snVLanByProtocolRowStatus
|
|
INTEGER,
|
|
snVLanByProtocolDynamicMask
|
|
PortMask,
|
|
snVLanByProtocolChassisStaticMask
|
|
OCTET STRING,
|
|
snVLanByProtocolChassisExcludeMask
|
|
OCTET STRING,
|
|
snVLanByProtocolChassisDynamicMask
|
|
OCTET STRING,
|
|
snVLanByProtocolVLanName
|
|
DisplayString,
|
|
snVLanByProtocolStaticPortList
|
|
OCTET STRING,
|
|
snVLanByProtocolExcludePortList
|
|
OCTET STRING,
|
|
snVLanByProtocolDynamicPortList
|
|
OCTET STRING
|
|
}
|
|
|
|
snVLanByProtocolVLanId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4095)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID index to both of the VLAN By Port Info Table
|
|
and this table."
|
|
::= { snVLanByProtocolEntry 1 }
|
|
|
|
|
|
snVLanByProtocolIndex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ip(1),
|
|
ipx(2),
|
|
appleTalk(3),
|
|
decNet(4),
|
|
netBios(5),
|
|
others(6),
|
|
ipv6(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The following IP/IPX protocol VLAN types are operated
|
|
in Layer3 VLAN such as : ip(1), ipx(2), ipv6(7)
|
|
The following are operated in Layer2 bridging such as:
|
|
appleTalk(3), decNet(4), netBios(5),
|
|
others(6) -- other protocols which are defined here. "
|
|
::= { snVLanByProtocolEntry 2 }
|
|
|
|
snVLanByProtocolDynamic OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" disabled(0) : disabled dynamic port inclusion - applied to switch only.
|
|
enabled(1) : enabled dynamic port inclusion - applied to switch only. "
|
|
::= { snVLanByProtocolEntry 3 }
|
|
|
|
snVLanByProtocolStaticMask OBJECT-TYPE
|
|
SYNTAX PortMask
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The Standand-alone switch Protocol VLAN port membership applied in static mode.
|
|
(It was obsoleted for Chassis Product)"
|
|
::= { snVLanByProtocolEntry 4 }
|
|
|
|
snVLanByProtocolExcludeMask OBJECT-TYPE
|
|
SYNTAX PortMask
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The Standand-alone switch Protocol VLAN port membership applied in exclusive mode.
|
|
(It was obsoleted for Chassis Product)"
|
|
::= { snVLanByProtocolEntry 5 }
|
|
|
|
snVLanByProtocolRouterIntf OBJECT-TYPE
|
|
SYNTAX INTEGER (1..60)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Optional: A virtual interface for router to the VLAN -- applied to router only.
|
|
If a SNMP-Get value is zero, that means this object was not configured."
|
|
::= { snVLanByProtocolEntry 6 }
|
|
|
|
snVLanByProtocolRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
valid(2),
|
|
delete(3),
|
|
create(4),
|
|
modify(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create and
|
|
delete row in the table and control
|
|
if they are used. The values
|
|
that can be written are:
|
|
delete(3)...deletes the row
|
|
create(4)...creates a new row
|
|
modify(5)...modifies an exsisting row
|
|
|
|
If the row exists, then a SET with
|
|
value of create(4) returns error
|
|
'badValue'. Deleted rows go away
|
|
immediately. The following values
|
|
can be returned on reads:
|
|
noSuch(0)...no such row
|
|
other(1)....some other case
|
|
valid(2)....the row exists and is valid"
|
|
::= { snVLanByProtocolEntry 7 }
|
|
|
|
snVLanByProtocolDynamicMask OBJECT-TYPE
|
|
SYNTAX PortMask
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The Standand-alone switch Protocol VLAN active port membership.
|
|
(It was obsoleted for Chassis Product)"
|
|
::= { snVLanByProtocolEntry 8 }
|
|
|
|
snVLanByProtocolChassisStaticMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(32))
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The Chassis Protocol VLAN port membership applied in static mode.
|
|
(It was obsoleted after release 07100, replaced by snVLanByProtocolStaticPortList)"
|
|
::= { snVLanByProtocolEntry 9 }
|
|
|
|
snVLanByProtocolChassisExcludeMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(32))
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The Chassis Protocol VLAN port membership applied in exclusive mode.
|
|
(It was obsoleted after release 07100, replaced by snVLanByProtocolExcludePortList)"
|
|
::= { snVLanByProtocolEntry 10 }
|
|
|
|
snVLanByProtocolChassisDynamicMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(32))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The Chassis Protocol VLAN active port membership.
|
|
(It was obsoleted after release 07100, replaced by snVLanByProtocolDynamicPortList)"
|
|
::= { snVLanByProtocolEntry 11 }
|
|
|
|
snVLanByProtocolVLanName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN Community Name string."
|
|
::= { snVLanByProtocolEntry 12 }
|
|
|
|
snVLanByProtocolStaticPortList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of port indices which are the configured port
|
|
membership of the Protocol VLAN. Each port index is a
|
|
16-bit integer in big endian order. 8-bit is the slot number,
|
|
the other 8-bit is the port number."
|
|
::= { snVLanByProtocolEntry 13 }
|
|
|
|
snVLanByProtocolExcludePortList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of port indices which are the excluded from port
|
|
membership of the Protocol VLAN. Each port index is a
|
|
16-bit integer in big endian order. 8-bit is the slot number,
|
|
the other 8-bit is the port number."
|
|
::= { snVLanByProtocolEntry 14 }
|
|
|
|
snVLanByProtocolDynamicPortList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of port indices which are dynamically joining the port
|
|
membership of the Protocol VLAN. Each port index is a
|
|
16-bit integer in big endian order. 8-bit is the slot number,
|
|
the other 8-bit is the port number."
|
|
::= { snVLanByProtocolEntry 15 }
|
|
|
|
|
|
-- VLAN By IP Subnet Configuration Table
|
|
|
|
|
|
snVLanByIpSubnetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnVLanByIpSubnetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of the VLAN By IPX Network Number Table."
|
|
::= { snVLanInfo 3 }
|
|
|
|
|
|
snVLanByIpSubnetEntry OBJECT-TYPE
|
|
SYNTAX SnVLanByIpSubnetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the VLAN By IP Subnet Configuration table. "
|
|
INDEX {
|
|
snVLanByIpSubnetVLanId,
|
|
snVLanByIpSubnetIpAddress,
|
|
snVLanByIpSubnetSubnetMask
|
|
}
|
|
::= { snVLanByIpSubnetTable 1 }
|
|
|
|
|
|
SnVLanByIpSubnetEntry ::= SEQUENCE {
|
|
snVLanByIpSubnetVLanId
|
|
INTEGER,
|
|
snVLanByIpSubnetIpAddress
|
|
IpAddress,
|
|
snVLanByIpSubnetSubnetMask
|
|
IpAddress,
|
|
snVLanByIpSubnetDynamic
|
|
INTEGER,
|
|
snVLanByIpSubnetStaticMask
|
|
PortMask,
|
|
snVLanByIpSubnetExcludeMask
|
|
PortMask,
|
|
snVLanByIpSubnetRouterIntf
|
|
INTEGER,
|
|
snVLanByIpSubnetRowStatus
|
|
INTEGER,
|
|
snVLanByIpSubnetDynamicMask
|
|
PortMask,
|
|
snVLanByIpSubnetChassisStaticMask
|
|
OCTET STRING,
|
|
snVLanByIpSubnetChassisExcludeMask
|
|
OCTET STRING,
|
|
snVLanByIpSubnetChassisDynamicMask
|
|
OCTET STRING,
|
|
snVLanByIpSubnetVLanName
|
|
DisplayString,
|
|
snVLanByIpSubnetStaticPortList
|
|
OCTET STRING,
|
|
snVLanByIpSubnetExcludePortList
|
|
OCTET STRING,
|
|
snVLanByIpSubnetDynamicPortList
|
|
OCTET STRING
|
|
}
|
|
|
|
snVLanByIpSubnetVLanId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4095)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID index to both of the VLAN By Port Info Table
|
|
and this table."
|
|
::= { snVLanByIpSubnetEntry 1 }
|
|
|
|
|
|
snVLanByIpSubnetIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Subnet IP address."
|
|
::= { snVLanByIpSubnetEntry 2 }
|
|
|
|
snVLanByIpSubnetSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Subnet mask associated with the Subnet IP address."
|
|
::= { snVLanByIpSubnetEntry 3 }
|
|
|
|
snVLanByIpSubnetDynamic OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" disabled(0) : disabled dynamic port inclusion - applied to switch only.
|
|
enabled(1) : enabled dynamic port inclusion - applied to switch only. "
|
|
::= { snVLanByIpSubnetEntry 4 }
|
|
|
|
snVLanByIpSubnetStaticMask OBJECT-TYPE
|
|
SYNTAX PortMask
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The Standand-alone switch VLAN By Subnet port membership applied in static mode.
|
|
(It was obsoleted for Chassis Product)"
|
|
::= { snVLanByIpSubnetEntry 5 }
|
|
|
|
snVLanByIpSubnetExcludeMask OBJECT-TYPE
|
|
SYNTAX PortMask
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The Standand-alone switch VLAN By Subnet port membership applied in exclusive mode.
|
|
(It was obsoleted for Chassis Product)"
|
|
::= { snVLanByIpSubnetEntry 6 }
|
|
|
|
snVLanByIpSubnetRouterIntf OBJECT-TYPE
|
|
SYNTAX INTEGER (1..60)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Optional: A virtual interface for router to the VLAN -- applied to router only.
|
|
If a SNMP-Get value is zero, that means this object was not configured."
|
|
::= { snVLanByIpSubnetEntry 7 }
|
|
|
|
|
|
snVLanByIpSubnetRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
valid(2),
|
|
delete(3),
|
|
create(4),
|
|
modify(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create and
|
|
delete row in the table and control
|
|
if they are used. The values
|
|
that can be written are:
|
|
delete(3)...deletes the row
|
|
create(4)...creates a new row
|
|
modify(5)...modifies an exsisting row
|
|
|
|
If the row exists, then a SET with
|
|
value of create(4) returns error
|
|
'badValue'. Deleted rows go away
|
|
immediately. The following values
|
|
can be returned on reads:
|
|
noSuch(0)...no such row
|
|
other(1)....some other case
|
|
valid(2)....the row exists and is valid"
|
|
::= { snVLanByIpSubnetEntry 8 }
|
|
|
|
snVLanByIpSubnetDynamicMask OBJECT-TYPE
|
|
SYNTAX PortMask
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The Standand-alone switch VLAN By Subnet active port membership.
|
|
(It was obsoleted for Chassis Product)"
|
|
::= { snVLanByIpSubnetEntry 9 }
|
|
|
|
snVLanByIpSubnetChassisStaticMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(32))
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The Chassis VLAN By Subnet port membership applied in static mode.
|
|
(It was obsoleted after release 07100, replaced by snVLanByIpSubnetStaticPortList)"
|
|
::= { snVLanByIpSubnetEntry 10 }
|
|
|
|
snVLanByIpSubnetChassisExcludeMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(32))
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The Chassis VLAN By Subnet port membership applied in exclusive mode.
|
|
(It was obsoleted after release 07100, replaced by snVLanByIpSubnetExcludePortList)"
|
|
::= { snVLanByIpSubnetEntry 11 }
|
|
|
|
snVLanByIpSubnetChassisDynamicMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(32))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The Chassis VLAN By Subnet active port membership.
|
|
(It was obsoleted after release 07100, replaced by snVLanByIpSubnetDynamicPortList)"
|
|
::= { snVLanByIpSubnetEntry 12 }
|
|
|
|
snVLanByIpSubnetVLanName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN Community Name string."
|
|
::= { snVLanByIpSubnetEntry 13 }
|
|
|
|
snVLanByIpSubnetStaticPortList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of port indices which are the configured port
|
|
membership of the VLAN By IP Subnet. Each port index is a
|
|
16-bit integer in big endian order. 8-bit is the slot number,
|
|
the other 8-bit is the port number."
|
|
::= { snVLanByIpSubnetEntry 14 }
|
|
|
|
snVLanByIpSubnetExcludePortList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of port indices which are the excluded from port
|
|
membership of the VLAN By IP Subnet. Each port index is a
|
|
16-bit integer in big endian order. 8-bit is the slot number,
|
|
the other 8-bit is the port number."
|
|
::= { snVLanByIpSubnetEntry 15 }
|
|
|
|
snVLanByIpSubnetDynamicPortList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of port indices which are dynamically joining the port
|
|
membership of the VLAN By IP Subnet. Each port index is a
|
|
16-bit integer in big endian order. 8-bit is the slot number,
|
|
the other 8-bit is the port number."
|
|
::= { snVLanByIpSubnetEntry 16 }
|
|
|
|
|
|
-- VLAN By IPX Net Configuration Table
|
|
|
|
|
|
snVLanByIpxNetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnVLanByIpxNetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of the VLAN By IPX Network Number Table."
|
|
::= { snVLanInfo 4 }
|
|
|
|
|
|
snVLanByIpxNetEntry OBJECT-TYPE
|
|
SYNTAX SnVLanByIpxNetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the VLAN By Ipx Network Number Configuration table. "
|
|
INDEX {
|
|
snVLanByIpxNetVLanId,
|
|
snVLanByIpxNetNetworkNum,
|
|
snVLanByIpxNetFrameType
|
|
}
|
|
::= { snVLanByIpxNetTable 1 }
|
|
|
|
|
|
SnVLanByIpxNetEntry ::= SEQUENCE {
|
|
snVLanByIpxNetVLanId
|
|
INTEGER,
|
|
snVLanByIpxNetNetworkNum
|
|
OCTET STRING,
|
|
snVLanByIpxNetFrameType
|
|
INTEGER,
|
|
snVLanByIpxNetDynamic
|
|
INTEGER,
|
|
snVLanByIpxNetStaticMask
|
|
PortMask,
|
|
snVLanByIpxNetExcludeMask
|
|
PortMask,
|
|
snVLanByIpxNetRouterIntf
|
|
INTEGER,
|
|
snVLanByIpxNetRowStatus
|
|
INTEGER,
|
|
snVLanByIpxNetDynamicMask
|
|
PortMask,
|
|
snVLanByIpxNetChassisStaticMask
|
|
OCTET STRING,
|
|
snVLanByIpxNetChassisExcludeMask
|
|
OCTET STRING,
|
|
snVLanByIpxNetChassisDynamicMask
|
|
OCTET STRING,
|
|
snVLanByIpxNetVLanName
|
|
DisplayString,
|
|
snVLanByIpxNetStaticPortList
|
|
OCTET STRING,
|
|
snVLanByIpxNetExcludePortList
|
|
OCTET STRING,
|
|
snVLanByIpxNetDynamicPortList
|
|
OCTET STRING
|
|
}
|
|
|
|
snVLanByIpxNetVLanId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4095)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID index to both of the VLAN By Port Info Table
|
|
and this table."
|
|
::= { snVLanByIpxNetEntry 1 }
|
|
|
|
|
|
snVLanByIpxNetNetworkNum OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPX Network Number."
|
|
::= { snVLanByIpxNetEntry 2 }
|
|
|
|
snVLanByIpxNetFrameType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notApplicable(0),
|
|
ipxEthernet8022(1),
|
|
ipxEthernet8023(2),
|
|
ipxEthernetII(3),
|
|
ipxEthernetSnap(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The following IPX Frame types are operated
|
|
in Layer3 VLAN such as :
|
|
ipxEthernet8022(1), ipxEthernet8023(2),
|
|
ipxEthernetII(3), ipxEthernetSnap(4).
|
|
choose notApplicable(0) for other protocols.
|
|
Note: Each Network Number can be assigned with one unique Frame type; Otherwise,
|
|
a SNMP-SET error will be returned."
|
|
::= { snVLanByIpxNetEntry 3 }
|
|
|
|
snVLanByIpxNetDynamic OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" disabled(0) : disabled dynamic port inclusion - applied to switch only.
|
|
enabled(1) : enabled dynamic port inclusion - applied to switch only. "
|
|
::= { snVLanByIpxNetEntry 4 }
|
|
|
|
snVLanByIpxNetStaticMask OBJECT-TYPE
|
|
SYNTAX PortMask
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The VLAN By IPX network port membership applied in static mode.
|
|
(It was obsoleted for Chassis Product)"
|
|
::= { snVLanByIpxNetEntry 5 }
|
|
|
|
snVLanByIpxNetExcludeMask OBJECT-TYPE
|
|
SYNTAX PortMask
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The VLAN By IPX network port membership applied in exclusive mode.
|
|
(It was obsoleted for Chassis Product)"
|
|
::= { snVLanByIpxNetEntry 6 }
|
|
|
|
|
|
snVLanByIpxNetRouterIntf OBJECT-TYPE
|
|
SYNTAX INTEGER (1..60)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Optional: A virtual interface for router to the VLAN -- applied to router only.
|
|
If a SNMP-Get value is zero, that means this object was not configured."
|
|
::= { snVLanByIpxNetEntry 7 }
|
|
|
|
|
|
snVLanByIpxNetRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
valid(2),
|
|
delete(3),
|
|
create(4),
|
|
modify(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create and
|
|
delete row in the table and control
|
|
if they are used. The values
|
|
that can be written are:
|
|
delete(3)...deletes the row
|
|
create(4)...creates a new row
|
|
modify(5)...modifies an exsisting row
|
|
|
|
If the row exists, then a SET with
|
|
value of create(4) returns error
|
|
'badValue'. Deleted rows go away
|
|
immediately. The following values
|
|
can be returned on reads:
|
|
noSuch(0)...no such row
|
|
other(1)....some other case
|
|
valid(2)....the row exists and is valid"
|
|
::= { snVLanByIpxNetEntry 8 }
|
|
|
|
snVLanByIpxNetDynamicMask OBJECT-TYPE
|
|
SYNTAX PortMask
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The VLAN By IPX network active port membership.
|
|
(It was obsoleted for Chassis Product)"
|
|
::= { snVLanByIpxNetEntry 9 }
|
|
|
|
snVLanByIpxNetChassisStaticMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(32))
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The Chassis VLAN By IPX network port membership applied in static mode.
|
|
(It was obsoleted after release 07100, replaced by snVLanByIpxNetStaticPortList)"
|
|
::= { snVLanByIpxNetEntry 10 }
|
|
|
|
snVLanByIpxNetChassisExcludeMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(32))
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The Chassis VLAN By IPX network port membership applied in exclusive mode.
|
|
(It was obsoleted after release 07100, replaced by snVLanByIpxNetExcludePortList)"
|
|
::= { snVLanByIpxNetEntry 11 }
|
|
|
|
snVLanByIpxNetChassisDynamicMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(32))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The Chassis VLAN By IPX network active port membership.
|
|
(It was obsoleted after release 07100, replaced by snVLanByIpxNetDynamicPortList)"
|
|
::= { snVLanByIpxNetEntry 12 }
|
|
|
|
snVLanByIpxNetVLanName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN Community Name string."
|
|
::= { snVLanByIpxNetEntry 13 }
|
|
|
|
snVLanByIpxNetStaticPortList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of port indices which are the configured port
|
|
membership of the VLAN By IPX network. Each port index is a
|
|
16-bit integer in big endian order. 8-bit is the slot number,
|
|
the other 8-bit is the port number."
|
|
::= { snVLanByIpxNetEntry 14 }
|
|
|
|
snVLanByIpxNetExcludePortList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of port indices which are the excluded from port
|
|
membership of the VLAN By IPX network. Each port index is a
|
|
16-bit integer in big endian order. 8-bit is the slot number,
|
|
the other 8-bit is the port number."
|
|
::= { snVLanByIpxNetEntry 15 }
|
|
|
|
snVLanByIpxNetDynamicPortList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of port indices which are dynamically joining the port
|
|
membership of the VLAN By IPX network. Each port index is a
|
|
16-bit integer in big endian order. 8-bit is the slot number,
|
|
the other 8-bit is the port number."
|
|
::= { snVLanByIpxNetEntry 16 }
|
|
|
|
|
|
-- VLAN By AppleTalk Cable Configuration Table
|
|
|
|
|
|
snVLanByATCableTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnVLanByATCableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Table Of VLAN By AppleTalk Network Number."
|
|
::= { snVLanInfo 5 }
|
|
|
|
snVLanByATCableEntry OBJECT-TYPE
|
|
SYNTAX SnVLanByATCableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of the AppleTalk Cable VLAN table."
|
|
INDEX {snVLanByATCableVLanId, snVLanByATCableIndex}
|
|
::= { snVLanByATCableTable 1 }
|
|
|
|
SnVLanByATCableEntry ::= SEQUENCE {
|
|
snVLanByATCableVLanId
|
|
INTEGER,
|
|
snVLanByATCableIndex
|
|
Integer32,
|
|
snVLanByATCableRouterIntf
|
|
INTEGER,
|
|
snVLanByATCableRowStatus
|
|
INTEGER,
|
|
snVLanByATCableChassisStaticMask
|
|
OCTET STRING,
|
|
snVLanByATCableVLanName
|
|
DisplayString,
|
|
snVLanByATCableStaticPortList
|
|
OCTET STRING
|
|
}
|
|
|
|
snVLanByATCableVLanId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4095)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID of a PORT VLAN of which the AppleTalk Cable
|
|
VLAN was attaching to."
|
|
::= { snVLanByATCableEntry 1 }
|
|
|
|
snVLanByATCableIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"AppleTalk Cable VLAN index number."
|
|
::= { snVLanByATCableEntry 2 }
|
|
|
|
snVLanByATCableRouterIntf OBJECT-TYPE
|
|
SYNTAX INTEGER (0..60)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A virtual router interface to the AppleTalk Cable VLAN,
|
|
only router products accept the SNMP-SET operation. The
|
|
value zero indicates that virtual router interface was
|
|
not configured."
|
|
::= { snVLanByATCableEntry 3 }
|
|
|
|
snVLanByATCableRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
valid(2),
|
|
delete(3),
|
|
create(4),
|
|
modify(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create and
|
|
delete row in the table and control
|
|
if they are used. The values
|
|
that can be written are:
|
|
delete(3)...deletes the row
|
|
create(4)...creates a new row
|
|
modify(5)...modifies an exsisting row
|
|
|
|
If the row exists, then a SET with
|
|
value of create(4) returns error
|
|
'badValue'. Deleted rows go away
|
|
immediately. The following values
|
|
can be returned on reads:
|
|
noSuch(0)...no such row
|
|
other(1)....some other case
|
|
valid(2)....the row exists and is valid"
|
|
::= { snVLanByATCableEntry 4 }
|
|
|
|
snVLanByATCableChassisStaticMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(32))
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A list of ports which are statically configured to
|
|
become port members of a VLAN.
|
|
(It was obsoleted after release 07100, replaced by snVLanByATCableStaticPortList)"
|
|
::= { snVLanByATCableEntry 5 }
|
|
|
|
snVLanByATCableVLanName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN Name string."
|
|
::= { snVLanByATCableEntry 6 }
|
|
|
|
snVLanByATCableStaticPortList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of port indices which are the configured port
|
|
membership of the AppleTalk Cable VLAN. Each port index is a
|
|
16-bit integer in big endian order. 8-bit is the slot number,
|
|
the other 8-bit is the port number."
|
|
::= { snVLanByATCableEntry 7 }
|
|
|
|
|
|
|
|
|
|
-- Switch Port Information Group
|
|
|
|
-- begin of deprecated snSwPortInfoTable
|
|
snSwPortInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnSwPortInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A specific snSwPortInfo group consists of a number of
|
|
switch ports. "
|
|
::= { snSwPortInfo 1 }
|
|
|
|
snSwPortInfoEntry OBJECT-TYPE
|
|
SYNTAX SnSwPortInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"An entry in the snSwPortInfo table indicates the
|
|
configuration on a specified port. A SNMP SET PDU
|
|
for a row of the snSwPortInfoTable requires the entired
|
|
sequence of the MIB Objects in each
|
|
snSwPortInfoEntry stored in one PDU. Otherwise,
|
|
GENERR return-value will be returned."
|
|
INDEX {
|
|
snSwPortInfoPortNum
|
|
}
|
|
::= { snSwPortInfoTable 1 }
|
|
|
|
SnSwPortInfoEntry ::= SEQUENCE {
|
|
snSwPortInfoPortNum
|
|
Integer32,
|
|
snSwPortInfoMonitorMode
|
|
INTEGER,
|
|
snSwPortInfoTagMode
|
|
INTEGER,
|
|
snSwPortInfoChnMode
|
|
INTEGER,
|
|
snSwPortInfoSpeed
|
|
INTEGER,
|
|
snSwPortInfoMediaType
|
|
INTEGER,
|
|
snSwPortInfoConnectorType
|
|
INTEGER,
|
|
snSwPortInfoAdminStatus
|
|
INTEGER,
|
|
snSwPortInfoLinkStatus
|
|
INTEGER,
|
|
snSwPortInfoPortQos
|
|
INTEGER,
|
|
snSwPortInfoPhysAddress
|
|
PhysAddress,
|
|
snSwPortStatsInFrames
|
|
Counter32,
|
|
snSwPortStatsOutFrames
|
|
Counter32,
|
|
snSwPortStatsAlignErrors
|
|
Counter32,
|
|
snSwPortStatsFCSErrors
|
|
Counter32,
|
|
snSwPortStatsMultiColliFrames
|
|
Counter32,
|
|
snSwPortStatsFrameTooLongs
|
|
Counter32,
|
|
snSwPortStatsTxColliFrames
|
|
Counter32,
|
|
snSwPortStatsRxColliFrames
|
|
Counter32,
|
|
snSwPortStatsFrameTooShorts
|
|
Counter32,
|
|
snSwPortLockAddressCount
|
|
INTEGER,
|
|
snSwPortStpPortEnable
|
|
INTEGER,
|
|
snSwPortDhcpGateListId
|
|
INTEGER,
|
|
snSwPortName
|
|
DisplayString,
|
|
snSwPortStatsInBcastFrames
|
|
Counter32,
|
|
snSwPortStatsOutBcastFrames
|
|
Counter32,
|
|
snSwPortStatsInMcastFrames
|
|
Counter32,
|
|
snSwPortStatsOutMcastFrames
|
|
Counter32,
|
|
snSwPortStatsInDiscard
|
|
Counter32,
|
|
snSwPortStatsOutDiscard
|
|
Counter32,
|
|
snSwPortStatsMacStations
|
|
Integer32,
|
|
snSwPortCacheGroupId
|
|
Integer32,
|
|
snSwPortTransGroupId
|
|
Integer32,
|
|
snSwPortInfoAutoNegotiate
|
|
INTEGER,
|
|
snSwPortInfoFlowControl
|
|
INTEGER,
|
|
snSwPortInfoGigType
|
|
INTEGER,
|
|
snSwPortStatsLinkChange
|
|
Counter32,
|
|
snSwPortIfIndex
|
|
Integer32,
|
|
snSwPortDescr
|
|
DisplayString,
|
|
snSwPortInOctets
|
|
OCTET STRING,
|
|
snSwPortOutOctets
|
|
OCTET STRING,
|
|
snSwPortStatsInBitsPerSec
|
|
Gauge32,
|
|
snSwPortStatsOutBitsPerSec
|
|
Gauge32,
|
|
snSwPortStatsInPktsPerSec
|
|
Gauge32,
|
|
snSwPortStatsOutPktsPerSec
|
|
Gauge32,
|
|
snSwPortStatsInUtilization
|
|
INTEGER ,
|
|
snSwPortStatsOutUtilization
|
|
INTEGER ,
|
|
snSwPortFastSpanPortEnable
|
|
INTEGER,
|
|
snSwPortFastSpanUplinkEnable
|
|
INTEGER,
|
|
snSwPortVlanId
|
|
INTEGER,
|
|
snSwPortRouteOnly
|
|
INTEGER,
|
|
snSwPortPresent
|
|
INTEGER,
|
|
snSwPortGBICStatus
|
|
INTEGER,
|
|
snSwPortStatsInKiloBitsPerSec
|
|
Unsigned32,
|
|
snSwPortStatsOutKiloBitsPerSec
|
|
Unsigned32,
|
|
snSwPortLoadInterval
|
|
INTEGER,
|
|
snSwPortTagType
|
|
Integer32 ,
|
|
snSwPortInLinePowerControl
|
|
INTEGER,
|
|
snSwPortInLinePowerWattage
|
|
Integer32 ,
|
|
snSwPortInLinePowerClass
|
|
INTEGER,
|
|
snSwPortInLinePowerPriority
|
|
INTEGER,
|
|
snSwPortInfoMirrorMode
|
|
INTEGER,
|
|
snSwPortStatsInJumboFrames
|
|
Counter64,
|
|
snSwPortStatsOutJumboFrames
|
|
Counter64,
|
|
snSwPortInLinePowerConsumed
|
|
Integer32,
|
|
snSwPortInLinePowerPDType
|
|
DisplayString
|
|
}
|
|
|
|
snSwPortInfoPortNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The port index.
|
|
The bit 0 to bit 7: port number.
|
|
The bit 8 to bit 11: slot number (slot for chassis only)."
|
|
::= { snSwPortInfoEntry 1 }
|
|
|
|
|
|
snSwPortInfoMonitorMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
input(1),
|
|
output(2),
|
|
both(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"DEPRECATED by snSwPortInfoMirrorMode and
|
|
snPortMonitorTable."
|
|
::= { snSwPortInfoEntry 2 }
|
|
|
|
|
|
snSwPortInfoTagMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tagged(1),
|
|
untagged(2),
|
|
auto(3),
|
|
disabled(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"For tagged port, we could have multiple VLANs
|
|
per port. For untagged port or auto port, there
|
|
is only one VLAN ID per port."
|
|
::= { snSwPortInfoEntry 3 }
|
|
|
|
|
|
snSwPortInfoChnMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
halfDuplex(1),
|
|
fullDuplex(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The port can be configured to operate in either
|
|
half or full duplex mode. The values are:
|
|
halfDuplex(1)...half duplex mode
|
|
fullDuplex(2)...full duplex mode
|
|
The read-back channel status from hardware are:
|
|
none(0).........link down or port disabled.
|
|
halfDuplex(1)...half duplex mode
|
|
fullDuplex(2)...full duplex mode
|
|
|
|
The port media type (expansion or regular)
|
|
and port link type (trunk or feeder) determine
|
|
value of this object.
|
|
The port can not set to half duplex mode
|
|
if the port connect mode is m200e(4).
|
|
However, the value of this parameter may be
|
|
automatically set whenever the expansion port
|
|
is connected (e.g. cascade connecting device)."
|
|
::= { snSwPortInfoEntry 4 }
|
|
|
|
|
|
snSwPortInfoSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
sAutoSense(1),
|
|
s10M(2),
|
|
s100M(3),
|
|
s1G(4),
|
|
s1GM(5),
|
|
s155M(6),
|
|
s10G(7),
|
|
s622M(8),
|
|
s2488M(9),
|
|
s9953M(10),
|
|
s16G(11),
|
|
s40G(13)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The speed configuration for a port. The values are:
|
|
none(0)..........link down or no traffic.
|
|
sAutoSense(1)....Auto-sensing 10 or 100Mbits.
|
|
s10M(2)..........10Mbits per second.
|
|
s100M(3).........100Mbits per second.
|
|
s1G(4)...........1Gbits per second.
|
|
s1GM(5)..........1Gbits per second master.
|
|
s155M(6).........155Mbits per second (ATM) (for expansion board only).
|
|
s10G(7)..........10Gbits per second.
|
|
s622M(8).........OC12 - 622Mbits per second
|
|
s2488M(9)........OC48 - 2.488Gbits per second
|
|
s9953M(10).......OC192 - 9.953Gbits per second
|
|
s16G(11)..........16Gbits per second.
|
|
s40G(13)..........40Gbits per second.
|
|
|
|
The read-back hardware status are the following:
|
|
none(0)..........link down or no traffic.
|
|
s10M(2)..........10Mbits per second.
|
|
s100M(3).........100Mbits per second.
|
|
s1G(4)...........1Gbits per second.
|
|
s1GM(5)..........1Gbits per second master.
|
|
s155M(6).........155Mbits per second (ATM) (for expansion board only).
|
|
s10G(7)..........10Gbits per second.
|
|
s622M(8).........OC12 - 622Mbits per second
|
|
s2488M(9)........OC48 - 2.488Gbits per second
|
|
s9953M(10).......OC192 - 9.953Gbits per second
|
|
s16G(11)..........16Gbits per second.
|
|
s40G(13)..........40Gbits per second.
|
|
|
|
The port media type (expansion or regular)
|
|
and port link type (trunk or feeder) determine
|
|
whether this object can be written and the valid
|
|
values.
|
|
It is not allowed to change speed for trunks ports.
|
|
For expansion ports, all of the above speed
|
|
can be set.
|
|
However, the value of this parameter may be
|
|
automatically set whenever the expansion port
|
|
is connected (e.g. cascade connecting device)."
|
|
::= { snSwPortInfoEntry 5 }
|
|
|
|
|
|
|
|
snSwPortInfoMediaType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
m100BaseTX(2),
|
|
m100BaseFX(3),
|
|
m1000BaseFX(4),
|
|
mT3(5),
|
|
m155ATM(6),
|
|
m1000BaseTX(7),
|
|
m622ATM(8),
|
|
m155POS(9),
|
|
m622POS(10),
|
|
m2488POS(11),
|
|
m10000BaseFX(12),
|
|
m9953POS(13),
|
|
m16GStacking(14),
|
|
m40GStacking(16)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The media type for the port. The
|
|
values are:
|
|
other(1).........other or unknown media.
|
|
m100BaseTX(2)....100Mbits per second copper.
|
|
m100BaseFX(3)....100Mbits per second fiber.
|
|
m1000BaseFX(4)...1Gbits per second fiber.
|
|
mT3(5)...........45Mbits per second (T3).
|
|
m155ATM(6).......155Mbits per second (ATM).
|
|
m1000BaseTX(7)...1Gbits per second copper.
|
|
m622ATM(8).......622Mbits per second (ATM).
|
|
m155POS(9).......155Mbits per second (POS).
|
|
m622POS(10)......622Mbits per second (POS).
|
|
m2488POS(11).....2488Mbits per second (POS).
|
|
m10000BaseFX(12).10Gbits per second fiber.
|
|
m9953POS(13).....9953Mbits per second (POS).
|
|
m16GStacking(14).16Gbits per second fiber.
|
|
m40GStacking(16). 40Gbits per second fiber."
|
|
::= { snSwPortInfoEntry 6 }
|
|
|
|
|
|
|
|
snSwPortInfoConnectorType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
copper(2),
|
|
fiber(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The type of connector that the port offers.
|
|
The values are:
|
|
other(1)...........other or unknown connector
|
|
copper(2)..........Copper connector
|
|
fiber(3)...........Fiber connector
|
|
This describes the physical connector type"
|
|
::= { snSwPortInfoEntry 7 }
|
|
|
|
|
|
snSwPortInfoAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1), -- ready to pass packets
|
|
down(2),
|
|
testing(3) -- in some test mode
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The desired state of all ports. The
|
|
testing(3) state indicates that no operational
|
|
packets can be passed.
|
|
(same as ifAdminStatus in MIB-II)"
|
|
::= { snSwPortInfoEntry 8 }
|
|
|
|
|
|
snSwPortInfoLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1), -- ready to pass packets
|
|
down(2),
|
|
testing(3) -- in some test mode
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The current operational state of the interface.
|
|
The testing(3) state indicates that no operational
|
|
packets can be passed.
|
|
(same as ifOperStatus in MIB-II)"
|
|
::= { snSwPortInfoEntry 9 }
|
|
|
|
|
|
snSwPortInfoPortQos OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
level0(0),
|
|
level1(1),
|
|
level2(2),
|
|
level3(3),
|
|
level4(4),
|
|
level5(5),
|
|
level6(6),
|
|
level7(7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The Stand alone stackable switch Port Qos Priority values are:
|
|
low(0) -- low prority
|
|
high(1) -- high prority.
|
|
The BigIron Port Qos Priority values are:
|
|
level0(0), level1(1), level2(2), level3(3),
|
|
level4(4), level5(5), level6(6), level7(7) "
|
|
::= { snSwPortInfoEntry 10 }
|
|
|
|
|
|
snSwPortInfoPhysAddress OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The port physical address. The physical address
|
|
represents the switch port."
|
|
::= { snSwPortInfoEntry 11 }
|
|
|
|
|
|
|
|
snSwPortStatsInFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The total number of packets received on the interface."
|
|
::= { snSwPortInfoEntry 12 }
|
|
|
|
|
|
snSwPortStatsOutFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The total number of packets transmitted out of the interface."
|
|
::= { snSwPortInfoEntry 13 }
|
|
|
|
|
|
snSwPortStatsAlignErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"dot3StatsAlignmentErrors : A count of frames
|
|
received on a particular interface that are
|
|
not an integral number of octets in length
|
|
and do not pass the FCS check.
|
|
|
|
The count represented by an instance of this
|
|
object is incremented when the alignmentError
|
|
status is returned by the MAC service to the
|
|
LLC (or other MAC user). Received frames for
|
|
which multiple error conditions obtain are,
|
|
according to the conventions of IEEE 802.3
|
|
Layer Management, counted exclusively according
|
|
to the error status presented to the LLC."
|
|
::= { snSwPortInfoEntry 14 }
|
|
|
|
snSwPortStatsFCSErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"dot3StatsFCSErrors : A count of frames received
|
|
on a particular interface that are an integral
|
|
number of octets in length but do not pass the
|
|
FCS check.
|
|
|
|
The count represented by an instance of this
|
|
object is incremented when the frameCheckError
|
|
status is returned by the MAC service to the
|
|
LLC (or other MAC user). Received frames for
|
|
which multiple error conditions obtain are,
|
|
according to the conventions of IEEE 802.3
|
|
Layer Management, counted exclusively according
|
|
to the error status presented to the LLC."
|
|
::= { snSwPortInfoEntry 15 }
|
|
|
|
|
|
snSwPortStatsMultiColliFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"dot3StatsMultipleCollisionFrames :
|
|
A count of successfully transmitted frames on
|
|
a particular interface for which transmission
|
|
is inhibited by more than one collision.
|
|
|
|
A frame that is counted by an instance of this
|
|
object is also counted by the corresponding
|
|
instance of either the ifOutUcastPkts,
|
|
ifOutMulticastPkts, or ifOutBroadcastPkts,
|
|
and is not counted by the corresponding
|
|
instance of the dot3StatsSingleCollisionFrames
|
|
object."
|
|
::= { snSwPortInfoEntry 16 }
|
|
|
|
|
|
snSwPortStatsFrameTooLongs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"dot3StatsFrameTooLongs : A count of frames
|
|
received on a particular interface that
|
|
exceed the maximum permitted frame size.
|
|
|
|
The count represented by an instance of this
|
|
object is incremented when the frameTooLong
|
|
status is returned by the MAC service to the
|
|
LLC (or other MAC user). Received frames for
|
|
which multiple error conditions obtain are,
|
|
according to the conventions of IEEE 802.3
|
|
Layer Management, counted exclusively according
|
|
to the error status presented to the LLC."
|
|
::= { snSwPortInfoEntry 17 }
|
|
|
|
|
|
snSwPortStatsTxColliFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A count of successfully transmitted frames on
|
|
a particular interface for which transmission
|
|
is inhibited by more than one collision.
|
|
|
|
A frame that is counted by a combination of
|
|
both dot3StatsSingleCollisionFrames and
|
|
dot3StatsMultipleCollisionFrames objects."
|
|
::= { snSwPortInfoEntry 18 }
|
|
|
|
snSwPortStatsRxColliFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A count of successfully received frames on
|
|
a particular interface for which transmission
|
|
is inhibited by more than one collision. This
|
|
object is not specified in dot3 but it has the
|
|
same functionarity as snSwPortStatsTxColliFrames."
|
|
::= { snSwPortInfoEntry 19 }
|
|
|
|
snSwPortStatsFrameTooShorts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
" A count of frames received on a particular
|
|
interface that below the minimum permitted
|
|
frame size."
|
|
::= { snSwPortInfoEntry 20 }
|
|
|
|
snSwPortLockAddressCount OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2048)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of source MAC addresses are allowed
|
|
for a port. Writing 0 to this object will allow
|
|
any number of addresses."
|
|
DEFVAL { 8 }
|
|
::= { snSwPortInfoEntry 21 }
|
|
|
|
snSwPortStpPortEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The enabled/disabled status of the port."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.5.2, dot1dStpPortEnable"
|
|
::= { snSwPortInfoEntry 22 }
|
|
|
|
snSwPortDhcpGateListId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..32)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The ID for a DHCP gateway list entry relative
|
|
to this switch port. 0 = unset or no assigned ID"
|
|
::= { snSwPortInfoEntry 23 }
|
|
|
|
snSwPortName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Port Name string."
|
|
::= { snSwPortInfoEntry 24 }
|
|
|
|
snSwPortStatsInBcastFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The total number of broadcast packets received on the interface."
|
|
::= { snSwPortInfoEntry 25 }
|
|
|
|
|
|
snSwPortStatsOutBcastFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The total number of broadcast packets transmitted out of the interface."
|
|
::= { snSwPortInfoEntry 26 }
|
|
|
|
snSwPortStatsInMcastFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The total number of multicast packets received on the interface."
|
|
::= { snSwPortInfoEntry 27 }
|
|
|
|
|
|
snSwPortStatsOutMcastFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The total number of multicast packets transmitted out of the interface."
|
|
::= { snSwPortInfoEntry 28 }
|
|
|
|
|
|
snSwPortStatsInDiscard OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of inbound packets which were chosen
|
|
to be discarded even though no errors had been
|
|
detected to prevent their being deliverable to a
|
|
higher-layer protocol. One possible reason for
|
|
discarding such a packet could be to free up
|
|
buffer space."
|
|
::= { snSwPortInfoEntry 29 }
|
|
|
|
|
|
snSwPortStatsOutDiscard OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of outbound packets which were chosen
|
|
to be discarded even though no errors had been
|
|
detected to prevent their being transmitted. One
|
|
possible reason for discarding such a packet could
|
|
be to free up buffer space."
|
|
::= { snSwPortInfoEntry 30 }
|
|
|
|
snSwPortStatsMacStations OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The total number of MAC Stations connected to the interface."
|
|
::= { snSwPortInfoEntry 31 }
|
|
|
|
|
|
snSwPortCacheGroupId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Cache Group ID for the interface."
|
|
::= { snSwPortInfoEntry 32 }
|
|
|
|
snSwPortTransGroupId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Transparent Group ID for the interface."
|
|
::= { snSwPortInfoEntry 33 }
|
|
|
|
snSwPortInfoAutoNegotiate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1),
|
|
negFullAuto(2),
|
|
global(3),
|
|
other(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This feature only applies to Gigabit Ethernet ports. If set to
|
|
disable(0), port will be put to non-negotiation mode. If set to
|
|
enable(1), port will start auto-negotiation indefinitely until
|
|
succeed. If set to negFullAuto(2), the port will start with auto-
|
|
negotiation, if the negotiation failed, then it will automatically
|
|
switch to non-negotiation mode. Stackable products (except TurboIron
|
|
8) Gigabit Ethernet ports do not support negFullAuto(2). If set
|
|
to global(3), port negotiation mode follows the value of
|
|
snSwGlobalAutoNegotiate. Non-Gigabit Ethernet port returns
|
|
the value other(4)."
|
|
DEFVAL { global }
|
|
::= { snSwPortInfoEntry 34 }
|
|
|
|
|
|
snSwPortInfoFlowControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Enable/Disbale port flow control."
|
|
DEFVAL { enabled }
|
|
::= { snSwPortInfoEntry 35 }
|
|
|
|
snSwPortInfoGigType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
m1000BaseSX(0),
|
|
m1000BaseLX(1),
|
|
m1000BaseLH(2),
|
|
m1000BaseLHA(3),
|
|
m1000BaseLHB(4),
|
|
m1000BaseTX(5),
|
|
m10000BaseSR(6),
|
|
m10000BaseLR(7),
|
|
m10000BaseER(8),
|
|
sfpCWDM1470nm80Km(9),
|
|
sfpCWDM1490nm80Km(10),
|
|
sfpCWDM1510nm80Km(11),
|
|
sfpCWDM1530nm80Km(12),
|
|
sfpCWDM1550nm80Km(13),
|
|
sfpCWDM1570nm80Km(14),
|
|
sfpCWDM1590nm80Km(15),
|
|
sfpCWDM1610nm80Km(16),
|
|
sfpCWDM1470nm100Km(17),
|
|
sfpCWDM1490nm100Km(18),
|
|
sfpCWDM1510nm100Km(19),
|
|
sfpCWDM1530nm100Km(20),
|
|
sfpCWDM1550nm100Km(21),
|
|
sfpCWDM1570nm100Km(22),
|
|
sfpCWDM1590nm100Km(23),
|
|
sfpCWDM1610nm100Km(24),
|
|
m1000BaseLHX(25),
|
|
m1000BaseSX2(26),
|
|
m1000BaseGBXU(27),
|
|
m1000BaseGBXD(28),
|
|
notApplicable(255)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The media type for the port. The
|
|
values are:
|
|
m1000BaseSX(0)....1Gbits per second fiber, with a short wavelength transceiver.
|
|
m1000BaseLX(1)....1Gbits per second fiber, with a long wavelength transceiver (3km).
|
|
m1000BaseLH(2)....1Gbits per second fiber, with a special wavelength transceiver (50km).
|
|
m1000BaseLHA(3)....1Gbits per second fiber, with a special wavelength transceiver (70km).
|
|
m1000BaseLHB(4)....1Gbits per second fiber, with a special wavelength transceiver (150km).
|
|
m1000BaseTX(5)....1Gbits per second copper (100meter).
|
|
m10000BaseSR(6)....10Gbits per second fiber, with a short range wavelength transceiver (100m).
|
|
m10000BaseLR(7)....10Gbits per second fiber, with a long range wavelength transceiver (10km).
|
|
m10000BaseER(8)....10Gbits per second fiber, with a extended range wavelength transceiver (40km).
|
|
sfpCWDM1470nm80Km(9)....1Gbits per second CWDM fiber, with a wavelength 1470nm, reach 80 kms.
|
|
sfpCWDM1490nm80Km(10)....1Gbits per second CWDM fiber, with a wavelength 1490nm, reach 80 kms.
|
|
sfpCWDM1510nm80Km(11)....1Gbits per second CWDM fiber, with a wavelength 1510nm, reach 80 kms.
|
|
sfpCWDM1530nm80Km(12)....1Gbits per second CWDM fiber, with a wavelength 1530nm, reach 80 kms.
|
|
sfpCWDM1550nm80Km(13)....1Gbits per second CWDM fiber, with a wavelength 1550nm, reach 80 kms.
|
|
sfpCWDM1570nm80Km(14)....1Gbits per second CWDM fiber, with a wavelength 1570nm, reach 80 kms.
|
|
sfpCWDM1590nm80Km(15)....1Gbits per second CWDM fiber, with a wavelength 1590nm, reach 80 kms.
|
|
sfpCWDM1610nm80Km(16)....1Gbits per second CWDM fiber, with a wavelength 1610nm, reach 80 kms.
|
|
sfpCWDM1470nm100Km(17)....1Gbits per second CWDM fiber, with a wavelength 1470nm, reach 100 kms.
|
|
sfpCWDM1490nm100Km(18)....1Gbits per second CWDM fiber, with a wavelength 1490nm, reach 100 kms.
|
|
sfpCWDM1510nm100Km(19)....1Gbits per second CWDM fiber, with a wavelength 1510nm, reach 100 kms.
|
|
sfpCWDM1530nm100Km(20)....1Gbits per second CWDM fiber, with a wavelength 1530nm, reach 100 kms.
|
|
sfpCWDM1550nm100Km(21)....1Gbits per second CWDM fiber, with a wavelength 1550nm, reach 100 kms.
|
|
sfpCWDM1570nm100Km(22)....1Gbits per second CWDM fiber, with a wavelength 1570nm, reach 100 kms.
|
|
sfpCWDM1590nm100Km(23)....1Gbits per second CWDM fiber, with a wavelength 1590nm, reach 100 kms.
|
|
sfpCWDM1610nm100Km(24)....1Gbits per second CWDM fiber, with a wavelength 1610nm, reach 100 kms.
|
|
m1000BaseLHX(25)...1Gbits per second fiber, with a special wavelength transceiver (150km).
|
|
notApplicable(255)....a non-gigabit port."
|
|
::= { snSwPortInfoEntry 36 }
|
|
|
|
|
|
snSwPortStatsLinkChange OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The total number of link state change of the interface."
|
|
::= { snSwPortInfoEntry 37 }
|
|
|
|
|
|
snSwPortIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"In order to identify a particular interface, this
|
|
object shall identify the instance of the ifIndex
|
|
object, defined in RFC 1213 and RFC 1573."
|
|
::= { snSwPortInfoEntry 38 }
|
|
|
|
|
|
snSwPortDescr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A textual string containing the slot/port information
|
|
about the interface."
|
|
::= { snSwPortInfoEntry 39 }
|
|
|
|
|
|
snSwPortInOctets OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(8))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The total number of octets received on the interface,
|
|
including framing characters. This object is a 64-bit
|
|
counter of the ifInOctets object, defined in RFC 1213.
|
|
The octet string is in big-endian byte order."
|
|
::= { snSwPortInfoEntry 40 }
|
|
|
|
|
|
snSwPortOutOctets OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(8))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The total number of octets transmitted out of the interface,
|
|
including framing characters. This object is a 64-bit
|
|
counter of the ifOutOctets object, defined in RFC 1213.
|
|
The octet string is in big-endian byte order."
|
|
::= { snSwPortInfoEntry 41 }
|
|
|
|
|
|
snSwPortStatsInBitsPerSec OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of bits per second received on the interface
|
|
over a 5 minutes interval."
|
|
::= { snSwPortInfoEntry 42 }
|
|
|
|
|
|
snSwPortStatsOutBitsPerSec OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of bits per second transmitted out of the interface
|
|
over a 5 minutes interval."
|
|
::= { snSwPortInfoEntry 43 }
|
|
|
|
|
|
snSwPortStatsInPktsPerSec OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of packets per second received on the interface
|
|
over a 5 minutes interval."
|
|
::= { snSwPortInfoEntry 44 }
|
|
|
|
|
|
snSwPortStatsOutPktsPerSec OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of packets per second transmitted out of the interface
|
|
over a 5 minutes interval."
|
|
::= { snSwPortInfoEntry 45 }
|
|
|
|
|
|
snSwPortStatsInUtilization OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10000)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The input network utilization in hundredths of a percent
|
|
over a 5 minutes interval."
|
|
::= { snSwPortInfoEntry 46 }
|
|
|
|
|
|
snSwPortStatsOutUtilization OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10000)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The output network utilization in hundredths of a percent
|
|
over a 5 minutes interval."
|
|
::= { snSwPortInfoEntry 47 }
|
|
|
|
snSwPortFastSpanPortEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The enabled/disabled fast span port status of the port."
|
|
::= { snSwPortInfoEntry 48 }
|
|
|
|
snSwPortFastSpanUplinkEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The enabled/disabled fast span uplink status of the port."
|
|
::= { snSwPortInfoEntry 49 }
|
|
|
|
snSwPortVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4095)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The ID of a VLAN of which this port is a member. Port must
|
|
be untagged. For tagged port which belongs to multiple
|
|
VLANs, this object return 0 which is an invalid VLAN ID
|
|
value."
|
|
::= { snSwPortInfoEntry 50 }
|
|
|
|
snSwPortRouteOnly OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Enable/Disable L2 switching of a routing switch port.
|
|
By default, the routing switch performs routing first.
|
|
If routing failed, it performs switching. Enable route
|
|
only instrcuts the routing switch to perform routing
|
|
only. For a L2 switching only product, reading this
|
|
object always return 'disabled', writing 'enabled' to
|
|
this object takes no effect."
|
|
DEFVAL { disabled }
|
|
::= { snSwPortInfoEntry 51 }
|
|
|
|
snSwPortPresent OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
false(0),
|
|
true(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Indicate if the port is absent or present.
|
|
This object only valid for M4 module
|
|
"
|
|
::= { snSwPortInfoEntry 52 }
|
|
|
|
snSwPortGBICStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
gbic(1),
|
|
miniGBIC(2),
|
|
empty(3),
|
|
other(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Indicate if the gig port has GBICs on them.
|
|
If set to GBIC(1), it means that the port is GBIC.
|
|
If set to miniGBIC(2), it means that the port miniGBIC.
|
|
If set to empty(3), it means that the GBIC is missing.
|
|
Value other(4) means that the port not a removable gig port.
|
|
"
|
|
::= { snSwPortInfoEntry 53 }
|
|
|
|
snSwPortStatsInKiloBitsPerSec OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Bit rate in kilobits per second received on the 10G and faster interface
|
|
over a 5 minutes interval."
|
|
::= { snSwPortInfoEntry 54 }
|
|
|
|
|
|
snSwPortStatsOutKiloBitsPerSec OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Bit rate in kilobits per second transmitted out of the 10G and faster interface
|
|
over a 5 minutes interval."
|
|
::= { snSwPortInfoEntry 55 }
|
|
|
|
snSwPortLoadInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (30..300)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The time in seconds for which average port utilization should be carried out.
|
|
The value should be incremental of 30 seconds, between the ranges specified."
|
|
DEFVAL { 300 }
|
|
::= { snSwPortInfoEntry 56 }
|
|
|
|
snSwPortTagType OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The IEEE802.1q tag type embedded in the length/type field of
|
|
an Ethernet packet. It specifies that the 2 octets after the
|
|
length/type field in an Ethernet packet is the tag value."
|
|
DEFVAL { 33024 }
|
|
::= { snSwPortInfoEntry 57 }
|
|
|
|
snSwPortInLinePowerControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disable(2),
|
|
enable(3),
|
|
enableLegacyDevice(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Control inline power on/off to a port. If a port does not
|
|
have inline power capability, reading this object returns
|
|
'other(1)'."
|
|
::= { snSwPortInfoEntry 58 }
|
|
|
|
snSwPortInLinePowerWattage OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Adjust the inline power wattage. Valid value between
|
|
1000 and 15400. Each unit is milliwatts.
|
|
This object can only be set after snSwPortInLinePowerControl
|
|
has been set to 'enable(3)' or 'enableLegacyDevice(4)'. If
|
|
a port does not have inline power capability, reading this
|
|
object returns undefined value."
|
|
::= { snSwPortInfoEntry 59 }
|
|
|
|
snSwPortInLinePowerClass OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Adjust the inline power class. This object can only be set
|
|
after snSwPortInLinePowerControl has been set to 'enable(3)'
|
|
or 'enableLegacyDevice(4)'. If a port does not have inline
|
|
power capability, reading this object returns undefined value."
|
|
::= { snSwPortInfoEntry 60 }
|
|
|
|
snSwPortInLinePowerPriority OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
invalid(0),
|
|
critical(1),
|
|
high(2),
|
|
low(3),
|
|
medium(4),
|
|
other(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Inline power allocation priority for the power device
|
|
0- Not a POE port, 1- Critical, 2- High, 3- Low,
|
|
4- Medium, 5- other."
|
|
::= { snSwPortInfoEntry 61 }
|
|
|
|
snSwPortInfoMirrorMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Enable/disable mirror on this port."
|
|
::= { snSwPortInfoEntry 62 }
|
|
|
|
snSwPortStatsInJumboFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The total number of jumbo packets received on the interface."
|
|
::= { snSwPortInfoEntry 63 }
|
|
|
|
snSwPortStatsOutJumboFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The total number of jumbo packets transmitted out of the interface."
|
|
::= { snSwPortInfoEntry 64 }
|
|
|
|
snSwPortInLinePowerConsumed OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Inline power consumed by the port. Each unit is milliwatts."
|
|
::= { snSwPortInfoEntry 66 }
|
|
|
|
snSwPortInLinePowerPDType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Inline Power device type 802.3af or Legacy device."
|
|
::= { snSwPortInfoEntry 67 }
|
|
-- end of deprecated snSwPortInfoTable
|
|
|
|
-- Switch Port Information Group
|
|
-- snSwIfInfoTable which is indexed by ifIndex port format is replacing the
|
|
-- snSwPortInfoTable which is indexed by a proprietary port format.
|
|
|
|
snSwIfInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnSwIfInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A specific snSwIfInfo group consists of a number of
|
|
switch ports. "
|
|
::= { snSwPortInfo 5 }
|
|
|
|
snSwIfInfoEntry OBJECT-TYPE
|
|
SYNTAX SnSwIfInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the snSwIfInfo table indicates the
|
|
configuration on a specified port. A SNMP SET PDU
|
|
for a row of the snSwIfInfoTable requires the entire
|
|
sequence of the MIB Objects in each
|
|
snSwIfInfoEntry stored in one PDU. Otherwise,
|
|
GENERR return-value will be returned."
|
|
INDEX { snSwIfInfoPortNum }
|
|
::= { snSwIfInfoTable 1 }
|
|
|
|
SnSwIfInfoEntry ::= SEQUENCE {
|
|
snSwIfInfoPortNum
|
|
InterfaceIndex,
|
|
snSwIfInfoMonitorMode
|
|
INTEGER,
|
|
snSwIfInfoMirrorPorts
|
|
OCTET STRING,
|
|
snSwIfInfoTagMode
|
|
INTEGER,
|
|
snSwIfInfoTagType
|
|
Integer32,
|
|
snSwIfInfoChnMode
|
|
INTEGER,
|
|
snSwIfInfoSpeed
|
|
INTEGER,
|
|
snSwIfInfoMediaType
|
|
INTEGER,
|
|
snSwIfInfoConnectorType
|
|
INTEGER,
|
|
snSwIfInfoAdminStatus
|
|
INTEGER,
|
|
snSwIfInfoLinkStatus
|
|
INTEGER,
|
|
snSwIfInfoPortQos
|
|
INTEGER,
|
|
snSwIfInfoPhysAddress
|
|
PhysAddress,
|
|
snSwIfLockAddressCount
|
|
INTEGER,
|
|
snSwIfStpPortEnable
|
|
INTEGER,
|
|
snSwIfDhcpGateListId
|
|
INTEGER,
|
|
snSwIfName
|
|
DisplayString,
|
|
snSwIfDescr
|
|
DisplayString,
|
|
snSwIfInfoAutoNegotiate
|
|
INTEGER,
|
|
snSwIfInfoFlowControl
|
|
INTEGER,
|
|
snSwIfInfoGigType
|
|
INTEGER,
|
|
snSwIfFastSpanPortEnable
|
|
INTEGER,
|
|
snSwIfFastSpanUplinkEnable
|
|
INTEGER,
|
|
snSwIfVlanId
|
|
INTEGER,
|
|
snSwIfRouteOnly
|
|
INTEGER,
|
|
snSwIfPresent
|
|
INTEGER,
|
|
snSwIfGBICStatus
|
|
INTEGER,
|
|
snSwIfLoadInterval
|
|
INTEGER ,
|
|
snSwIfStatsInFrames
|
|
Counter32,
|
|
snSwIfStatsOutFrames
|
|
Counter32,
|
|
snSwIfStatsAlignErrors
|
|
Counter32,
|
|
snSwIfStatsFCSErrors
|
|
Counter32,
|
|
snSwIfStatsMultiColliFrames
|
|
Counter32,
|
|
snSwIfStatsTxColliFrames
|
|
Counter32,
|
|
snSwIfStatsRxColliFrames
|
|
Counter32,
|
|
snSwIfStatsFrameTooLongs
|
|
Counter32,
|
|
snSwIfStatsFrameTooShorts
|
|
Counter32,
|
|
snSwIfStatsInBcastFrames
|
|
Counter32,
|
|
snSwIfStatsOutBcastFrames
|
|
Counter32,
|
|
snSwIfStatsInMcastFrames
|
|
Counter32,
|
|
snSwIfStatsOutMcastFrames
|
|
Counter32,
|
|
snSwIfStatsInDiscard
|
|
Counter32,
|
|
snSwIfStatsOutDiscard
|
|
Counter32,
|
|
snSwIfStatsMacStations
|
|
Integer32,
|
|
snSwIfStatsLinkChange
|
|
Counter32,
|
|
snSwIfInOctets
|
|
Counter64,
|
|
snSwIfOutOctets
|
|
Counter64,
|
|
snSwIfStatsInBitsPerSec
|
|
Gauge32,
|
|
snSwIfStatsOutBitsPerSec
|
|
Gauge32,
|
|
snSwIfStatsInPktsPerSec
|
|
Gauge32,
|
|
snSwIfStatsOutPktsPerSec
|
|
Gauge32,
|
|
snSwIfStatsInUtilization
|
|
INTEGER ,
|
|
snSwIfStatsOutUtilization
|
|
INTEGER ,
|
|
snSwIfStatsInKiloBitsPerSec
|
|
Unsigned32,
|
|
snSwIfStatsOutKiloBitsPerSec
|
|
Unsigned32,
|
|
snSwIfStatsInJumboFrames
|
|
Counter64,
|
|
snSwIfStatsOutJumboFrames
|
|
Counter64,
|
|
snSwIfInfoMirrorMode
|
|
INTEGER,
|
|
snSwIfMacLearningDisable
|
|
TruthValue
|
|
}
|
|
|
|
snSwIfInfoPortNum OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port/interface index (ifindex)."
|
|
::= { snSwIfInfoEntry 1 }
|
|
|
|
snSwIfInfoMonitorMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
input(1),
|
|
output(2),
|
|
both(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"DEPRECATED by snSwIf2MirrorMode and
|
|
snPortMonitorTable."
|
|
::= { snSwIfInfoEntry 2 }
|
|
|
|
snSwIfInfoMirrorPorts OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of port/interface index (ifindex), which mirror this interface,
|
|
when monitoring is enabled."
|
|
::= { snSwIfInfoEntry 3 }
|
|
|
|
snSwIfInfoTagMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tagged(1),
|
|
untagged(2),
|
|
dual(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For tagged/dual port, we could have multiple VLANs
|
|
per port. For untagged port, there
|
|
is only one VLAN ID per port, dual mode is associated with
|
|
a vlan id 'snSwIfVlanId', dual mode with snSwIfVlanId zero
|
|
disables the dual mode."
|
|
::= { snSwIfInfoEntry 4 }
|
|
|
|
snSwIfInfoTagType OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IEEE802.1q tag type embedded in the length/type field of
|
|
an Ethernet packet. It specifies that the 2 octets after the
|
|
length/type field in an Ethernet packet is the tag value."
|
|
DEFVAL { 33024 }
|
|
::= { snSwIfInfoEntry 5 }
|
|
|
|
snSwIfInfoChnMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
halfDuplex(1),
|
|
fullDuplex(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port can be configured to operate in either
|
|
half or full duplex mode. The values are:
|
|
none(0) is not used.
|
|
halfDuplex(1)...half duplex mode
|
|
fullDuplex(2)...full duplex mode
|
|
The read-back channel status from hardware are:
|
|
halfDuplex(1)...half duplex mode
|
|
fullDuplex(2)...full duplex mode
|
|
|
|
The port media type (expansion or regular)
|
|
and port link type (trunk or feeder) determine
|
|
value of this object.
|
|
The port can not set to half duplex mode
|
|
if the port connect mode is m200e(4).
|
|
However, the value of this parameter may be
|
|
automatically set whenever the expansion port
|
|
is connected (e.g. cascade connecting device)."
|
|
::= { snSwIfInfoEntry 6 }
|
|
|
|
snSwIfInfoSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
sAutoSense(1),
|
|
s10M(2),
|
|
s100M(3),
|
|
s1G(4),
|
|
s1GM(5),
|
|
s155M(6),
|
|
s10G(7),
|
|
s622M(8),
|
|
s2488M(9),
|
|
s9953M(10),
|
|
s16G(11),
|
|
s100G(12),
|
|
s40G(13)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The speed configuration for a port. The values are:
|
|
none(0)..........not used.
|
|
sAutoSense(1)....Auto-sensing 10 or 100Mbits.
|
|
s10M(2)..........10Mbits per second.
|
|
s100M(3).........100Mbits per second.
|
|
s1G(4)...........1Gbits per second.
|
|
s1GM(5)..........1Gbits per second master.
|
|
s155M(6).........155Mbits per second (ATM) (for expansion board only).
|
|
s10G(7)..........10Gbits per second.
|
|
s622M(8).........OC12 - 622Mbits per second
|
|
s2488M(9)........OC48 - 2.488Gbits per second
|
|
s9953M(10).......OC192 - 9.953Gbits per second
|
|
s16G(11)..........16Gbits per second.
|
|
s40G(13)..........40Gbits per second.
|
|
|
|
The read-back hardware status are the following:
|
|
s10M(2)..........10Mbits per second.
|
|
s100M(3).........100Mbits per second.
|
|
s1G(4)...........1Gbits per second.
|
|
s1GM(5)..........1Gbits per second master.
|
|
s155M(6).........155Mbits per second (ATM) (for expansion board only).
|
|
s10G(7)..........10Gbits per second.
|
|
s622M(8).........OC12 - 622Mbits per second
|
|
s2488M(9)........OC48 - 2.488Gbits per second
|
|
s9953M(10).......OC192 - 9.953Gbits per second
|
|
s16G(11)..........16Gbits per second.
|
|
s40G(13)..........40Gbits per second.
|
|
|
|
The port media type (expansion or regular)
|
|
and port link type (trunk or feeder) determine
|
|
whether this object can be written and the valid
|
|
values.
|
|
It is not allowed to change speed for trunks ports.
|
|
For expansion ports, all of the above speed
|
|
can be set.
|
|
However, the value of this parameter may be
|
|
automatically set whenever the expansion port
|
|
is connected (e.g. cascade connecting device)."
|
|
::= { snSwIfInfoEntry 7 }
|
|
|
|
snSwIfInfoMediaType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
m100BaseTX(2),
|
|
m100BaseFX(3),
|
|
m1000BaseFX(4),
|
|
mT3(5),
|
|
m155ATM(6),
|
|
m1000BaseTX(7),
|
|
m622ATM(8),
|
|
m155POS(9),
|
|
m622POS(10),
|
|
m2488POS(11),
|
|
m10000BaseFX(12),
|
|
m9953POS(13),
|
|
m16GStacking(14),
|
|
m100GBaseFX(15),
|
|
m40GStacking(16)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The media type for the port. The
|
|
values are:
|
|
other(1).........other or unknown media.
|
|
m100BaseTX(2)....100Mbits per second copper.
|
|
m100BaseFX(3)....100Mbits per second fiber.
|
|
m1000BaseFX(4)...1Gbits per second fiber.
|
|
mT3(5)...........45Mbits per second (T3).
|
|
m155ATM(6).......155Mbits per second (ATM).
|
|
m1000BaseTX(7)...1Gbits per second copper.
|
|
m622ATM(8).......622Mbits per second (ATM).
|
|
m155POS(9).......155Mbits per second (POS).
|
|
m622POS(10)......622Mbits per second (POS).
|
|
m2488POS(11).....2488Mbits per second (POS).
|
|
m10000BaseFX(12).10Gbits per second fiber.
|
|
m9953POS(13).....9953Mbits per second (POS).
|
|
m16GStacking(14)...16Gbits per second fiber.
|
|
m40GStacking(16). 40Gbits per second fiber."
|
|
::= { snSwIfInfoEntry 8 }
|
|
|
|
snSwIfInfoConnectorType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
copper(2),
|
|
fiber(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of connector that the port offers.
|
|
The values are:
|
|
other(1)...........other or unknown connector
|
|
copper(2)..........Copper connector
|
|
fiber(3)...........Fiber connector
|
|
This describes the physical connector type"
|
|
::= { snSwIfInfoEntry 9 }
|
|
|
|
snSwIfInfoAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1), -- ready to pass packets
|
|
down(2),
|
|
testing(3) -- in some test mode
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The desired state of all ports. The
|
|
testing(3) state indicates that no operational
|
|
packets can be passed.
|
|
(same as ifAdminStatus in MIB-II)"
|
|
::= { snSwIfInfoEntry 10 }
|
|
|
|
snSwIfInfoLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1), -- ready to pass packets
|
|
down(2),
|
|
testing(3) -- in some test mode
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operational state of the interface.
|
|
The testing(3) state indicates that no operational
|
|
packets can be passed.
|
|
(same as ifOperStatus in MIB-II)"
|
|
::= { snSwIfInfoEntry 11 }
|
|
|
|
snSwIfInfoPortQos OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
level0(0),
|
|
level1(1),
|
|
level2(2),
|
|
level3(3),
|
|
level4(4),
|
|
level5(5),
|
|
level6(6),
|
|
level7(7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Stand alone stackable switch Port Qos Priority values are:
|
|
low(0) -- low prority
|
|
high(1) -- high prority.
|
|
The BigIron Port Qos Priority values are:
|
|
level0(0), level1(1), level2(2), level3(3),
|
|
level4(4), level5(5), level6(6), level7(7) "
|
|
::= { snSwIfInfoEntry 12 }
|
|
|
|
snSwIfInfoPhysAddress OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port physical address. The physical address
|
|
represents the switch port."
|
|
::= { snSwIfInfoEntry 13 }
|
|
|
|
snSwIfLockAddressCount OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2048)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of source MAC addresses are allowed
|
|
for a port. Writing 0 to this object will allow
|
|
any number of addresses."
|
|
DEFVAL { 8 }
|
|
::= { snSwIfInfoEntry 14 }
|
|
|
|
snSwIfStpPortEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The enabled/disabled status of the port."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.5.2, dot1dStpPortEnable"
|
|
::= { snSwIfInfoEntry 15 }
|
|
|
|
snSwIfDhcpGateListId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..32)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ID for a DHCP gateway list entry relative
|
|
to this switch port. 0 = unset or no assigned ID"
|
|
::= { snSwIfInfoEntry 16 }
|
|
|
|
snSwIfName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port Name string."
|
|
::= { snSwIfInfoEntry 17 }
|
|
|
|
snSwIfDescr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A textual string containing the slot/port information
|
|
about the interface."
|
|
::= { snSwIfInfoEntry 18 }
|
|
|
|
snSwIfInfoAutoNegotiate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1),
|
|
negFullAuto(2),
|
|
global(3),
|
|
other(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This feature only applies to Gigabit Ethernet ports. If set to
|
|
disable(0), port will be put to non-negotiation mode. If set to
|
|
enable(1), port will start auto-negotiation indefinitely until
|
|
succeed. If set to negFullAuto(2), the port will start with auto-
|
|
negotiation, if the negotiation failed, then it will automatically
|
|
switch to non-negotiation mode. Stackable products (except TurboIron
|
|
8) Gigabit Ethernet ports do not support negFullAuto(2). If set
|
|
to global(3), port negotiation mode follows the value of
|
|
snSwGlobalAutoNegotiate. Non-Gigabit Ethernet port returns
|
|
the value other(4)."
|
|
DEFVAL { global }
|
|
::= { snSwIfInfoEntry 19 }
|
|
|
|
snSwIfInfoFlowControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/Disbale port flow control."
|
|
DEFVAL { enabled }
|
|
::= { snSwIfInfoEntry 20 }
|
|
|
|
snSwIfInfoGigType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
m1000BaseSX(0),
|
|
m1000BaseLX(1),
|
|
m1000BaseLH(2),
|
|
m1000BaseLHA(3),
|
|
m1000BaseLHB(4),
|
|
m1000BaseTX(5),
|
|
m10000BaseSR(6),
|
|
m10000BaseLR(7),
|
|
m10000BaseER(8),
|
|
sfpCWDM1470nm80Km(9),
|
|
sfpCWDM1490nm80Km(10),
|
|
sfpCWDM1510nm80Km(11),
|
|
sfpCWDM1530nm80Km(12),
|
|
sfpCWDM1550nm80Km(13),
|
|
sfpCWDM1570nm80Km(14),
|
|
sfpCWDM1590nm80Km(15),
|
|
sfpCWDM1610nm80Km(16),
|
|
sfpCWDM1470nm100Km(17),
|
|
sfpCWDM1490nm100Km(18),
|
|
sfpCWDM1510nm100Km(19),
|
|
sfpCWDM1530nm100Km(20),
|
|
sfpCWDM1550nm100Km(21),
|
|
sfpCWDM1570nm100Km(22),
|
|
sfpCWDM1590nm100Km(23),
|
|
sfpCWDM1610nm100Km(24),
|
|
m1000BaseLHX(25),
|
|
m1000BaseSX2(26),
|
|
mSFP1000BaseBXU(27),
|
|
mSFP1000BaseBXD(28),
|
|
mSFP100BaseBX(29),
|
|
mSFP100BaseBXU(30),
|
|
mSFP100BaseBXD(31),
|
|
mSFP100BaseFX(32),
|
|
mSFP100BaseFXIR(33),
|
|
mSFP100BaseFXLR(34),
|
|
m1000BaseLMC(35),
|
|
mXFP10000BaseSR(36),
|
|
mXFP10000BaseLR(37),
|
|
mXFP10000BaseER(38),
|
|
mXFP10000BaseSW(39),
|
|
mXFP10000BaseLW(40),
|
|
mXFP10000BaseEW(41),
|
|
mXFP10000BaseCX4(42),
|
|
mXFP10000BaseZR(43),
|
|
mXFP10000BaseZRD(44),
|
|
m1000BaseC6553(45),
|
|
mXFP10000BaseSRSW(46),
|
|
mXFP10000BaseLRLW(47),
|
|
mXFP10000BaseEREW(48),
|
|
m1000BaseGBXU(127),
|
|
m1000BaseGBXD(128),
|
|
m1000BaseFBX(129),
|
|
m1000BaseFBXU(130),
|
|
m1000BaseFBXD(131),
|
|
m1000BaseFX(132),
|
|
m1000BaseFXIR(133),
|
|
m1000BaseFXLR(134),
|
|
m1000BaseXGSR(136),
|
|
m1000BaseXGLR(137),
|
|
m1000BaseXGER(138),
|
|
m1000BaseXGSW(139),
|
|
m1000BaseXGLW(140),
|
|
m1000BaseXGEW(141),
|
|
m1000BaseXGCX4(142),
|
|
m1000BaseXGZR(143),
|
|
m1000BaseXGZRD(144),
|
|
mCFP100GBaseSR10(145),
|
|
mCFP100GBaseLR4(146),
|
|
mCFP100GBaseER4(147),
|
|
mCFP100GBase10x10g2Km(148),
|
|
mCFP100GBase10x10g10Km(149),
|
|
notApplicable(255)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The media type for the port. The
|
|
values are:
|
|
m1000BaseSX(0)....1Gbits per second fiber, with a short wavelength transceiver.
|
|
m1000BaseLX(1)....1Gbits per second fiber, with a long wavelength transceiver (3km).
|
|
m1000BaseLH(2)....1Gbits per second fiber, with a special wavelength transceiver (50km).
|
|
m1000BaseLHA(3)....1Gbits per second fiber, with a special wavelength transceiver (70km).
|
|
m1000BaseLHB(4)....1Gbits per second fiber, with a special wavelength transceiver (150km).
|
|
m1000BaseTX(5)....1Gbits per second copper (100meter).
|
|
m10000BaseSR(6)....10Gbits per second fiber, with a short range wavelength transceiver (100m).
|
|
m10000BaseLR(7)....10Gbits per second fiber, with a long range wavelength transceiver (10km).
|
|
m10000BaseER(8)....10Gbits per second fiber, with a extended range wavelength transceiver (40km).
|
|
sfpCWDM1470nm80Km(9)....1Gbits per second CWDM fiber, with a wavelength 1470nm, reach 80 kms.
|
|
sfpCWDM1490nm80Km(10)....1Gbits per second CWDM fiber, with a wavelength 1490nm, reach 80 kms.
|
|
sfpCWDM1510nm80Km(11)....1Gbits per second CWDM fiber, with a wavelength 1510nm, reach 80 kms.
|
|
sfpCWDM1530nm80Km(12)....1Gbits per second CWDM fiber, with a wavelength 1530nm, reach 80 kms.
|
|
sfpCWDM1550nm80Km(13)....1Gbits per second CWDM fiber, with a wavelength 1550nm, reach 80 kms.
|
|
sfpCWDM1570nm80Km(14)....1Gbits per second CWDM fiber, with a wavelength 1570nm, reach 80 kms.
|
|
sfpCWDM1590nm80Km(15)....1Gbits per second CWDM fiber, with a wavelength 1590nm, reach 80 kms.
|
|
sfpCWDM1610nm80Km(16)....1Gbits per second CWDM fiber, with a wavelength 1610nm, reach 80 kms.
|
|
sfpCWDM1470nm100Km(17)....1Gbits per second CWDM fiber, with a wavelength 1470nm, reach 100 kms.
|
|
sfpCWDM1490nm100Km(18)....1Gbits per second CWDM fiber, with a wavelength 1490nm, reach 100 kms.
|
|
sfpCWDM1510nm100Km(19)....1Gbits per second CWDM fiber, with a wavelength 1510nm, reach 100 kms.
|
|
sfpCWDM1530nm100Km(20)....1Gbits per second CWDM fiber, with a wavelength 1530nm, reach 100 kms.
|
|
sfpCWDM1550nm100Km(21)....1Gbits per second CWDM fiber, with a wavelength 1550nm, reach 100 kms.
|
|
sfpCWDM1570nm100Km(22)....1Gbits per second CWDM fiber, with a wavelength 1570nm, reach 100 kms.
|
|
sfpCWDM1590nm100Km(23)....1Gbits per second CWDM fiber, with a wavelength 1590nm, reach 100 kms.
|
|
sfpCWDM1610nm100Km(24)....1Gbits per second CWDM fiber, with a wavelength 1610nm, reach 100 kms.
|
|
m1000BaseLHX(25)...1Gbits per second fiber, with a special wavelength transceiver (150km).
|
|
m1000BaseLMC(35)...Link Media Copper.
|
|
mXFP10000BaseSR(36)...10GBASE fiber, 850nm serial pluggable XFP optic (LC), target range 300m over MMF.
|
|
mXFP10000BaseLR(37)...10GBASE fiber, 1310nm serial pluggable XFP optic (LC) for up to 10km over SMF.
|
|
mXFP10000BaseER(38)...10GBASE fiber, 1550nm serial pluggable XFP optic (LC) for up to 40km over SMF.
|
|
mXFP10000BaseSW(39)...not used.
|
|
mXFP10000BaseLW(40)...not used.
|
|
mXFP10000BaseEW(41)...not used
|
|
mXFP10000BaseCX4(42)...10GBASE-CX4, XFP module,15m, CX4 connector.
|
|
mXFP10000BaseZR(43)...1550nm serial pluggable XFP optic (LC) for up to 80km over SMF.
|
|
mXFP10000BaseZRD(44)...10GBASE-ZR DWDM, XFP optic, 80km.
|
|
mXFP10000BaseSRSW(46)...same as .mXFP10000BaseSR(36)
|
|
mXFP10000BaseLRLW(47)...same as .mXFP10000BaseLR(37)
|
|
mXFP10000BaseEREW(48)...same as mXFP10000BaseER(38).
|
|
mCFP100GBaseSR10(145)... 100GbE CFP optic (MPO 2x12), SR10, for distances up to 100m over MMF.
|
|
mCFP100GBaseLR4(146)... 100GbE CFP optic (SC), LR4, for distances up to 10 km over SMF.
|
|
mCFP100GBaseER4(147)... 100GbE CFP optic, ER4, for distances up to 40 km over SMF.
|
|
mCFP100GBase10x10g2Km(148)... 100GbE CFP optic (LC), 10x10, for distances up to 2 km over SMF.
|
|
mCFP100GBase10x10g10Km(149)... 100GbE CFP optic (LC), 10x10, for distances up to 10 km over SMF.
|
|
notApplicable(255)....a non-gigabit port."
|
|
::= { snSwIfInfoEntry 21 }
|
|
|
|
snSwIfFastSpanPortEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The enabled/disabled fast span port status of the port."
|
|
::= { snSwIfInfoEntry 22 }
|
|
|
|
snSwIfFastSpanUplinkEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The enabled/disabled fast span uplink status of the port."
|
|
::= { snSwIfInfoEntry 23 }
|
|
|
|
snSwIfVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4095)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ID of a VLAN of which this port is a member. Port must
|
|
be untagged. For tagged port which belongs to multiple
|
|
VLANs, this object return 0 which is an invalid VLAN ID
|
|
value, reading is valid only for untagged and dual mode,
|
|
writing is valid for only dual mode."
|
|
::= { snSwIfInfoEntry 24 }
|
|
|
|
snSwIfRouteOnly OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/Disable L2 switching of a routing switch port.
|
|
By default, the routing switch performs routing first.
|
|
If routing failed, it performs switching. Enable route
|
|
only instrcuts the routing switch to perform routing
|
|
only. For a L2 switching only product, reading this
|
|
object always return 'disabled', writing 'enabled' to
|
|
this object takes no effect."
|
|
DEFVAL { disabled }
|
|
::= { snSwIfInfoEntry 25 }
|
|
|
|
snSwIfPresent OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
false(0),
|
|
true(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicate if the port is absent or present.
|
|
This object only valid for M4 module."
|
|
::= { snSwIfInfoEntry 26 }
|
|
|
|
snSwIfGBICStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
gbic(1),
|
|
miniGBIC(2),
|
|
empty(3),
|
|
other(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicate if the gig port has GBICs on them.
|
|
If set to GBIC(1), it means that the port is GBIC.
|
|
If set to miniGBIC(2), it means that the port miniGBIC.
|
|
If set to empty(3), it means that the GBIC is missing.
|
|
Value other(4) means that the port not a removable gig port.
|
|
"
|
|
::= { snSwIfInfoEntry 27 }
|
|
|
|
snSwIfLoadInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (30..300)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time in seconds for which average port utilization should be carried out.
|
|
The value should be incremental of 30 seconds, between the ranges specified."
|
|
DEFVAL { 300 }
|
|
::= { snSwIfInfoEntry 28 }
|
|
|
|
snSwIfStatsInFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received on the interface."
|
|
::= { snSwIfInfoEntry 29 }
|
|
|
|
snSwIfStatsOutFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets transmitted out of the interface."
|
|
::= { snSwIfInfoEntry 30 }
|
|
|
|
snSwIfStatsAlignErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"dot3StatsAlignmentErrors : A count of frames
|
|
received on a particular interface that are
|
|
not an integral number of octets in length
|
|
and do not pass the FCS check.
|
|
|
|
The count represented by an instance of this
|
|
object is incremented when the alignmentError
|
|
status is returned by the MAC service to the
|
|
LLC (or other MAC user). Received frames for
|
|
which multiple error conditions obtain are,
|
|
according to the conventions of IEEE 802.3
|
|
Layer Management, counted exclusively according
|
|
to the error status presented to the LLC."
|
|
::= { snSwIfInfoEntry 31 }
|
|
|
|
snSwIfStatsFCSErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"dot3StatsFCSErrors : A count of frames received
|
|
on a particular interface that are an integral
|
|
number of octets in length but do not pass the
|
|
FCS check.
|
|
|
|
The count represented by an instance of this
|
|
object is incremented when the frameCheckError
|
|
status is returned by the MAC service to the
|
|
LLC (or other MAC user). Received frames for
|
|
which multiple error conditions obtain are,
|
|
according to the conventions of IEEE 802.3
|
|
Layer Management, counted exclusively according
|
|
to the error status presented to the LLC."
|
|
::= { snSwIfInfoEntry 32 }
|
|
|
|
snSwIfStatsMultiColliFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"dot3StatsMultipleCollisionFrames :
|
|
A count of successfully transmitted frames on
|
|
a particular interface for which transmission
|
|
is inhibited by more than one collision.
|
|
|
|
A frame that is counted by an instance of this
|
|
object is also counted by the corresponding
|
|
instance of either the ifOutUcastPkts,
|
|
ifOutMulticastPkts, or ifOutBroadcastPkts,
|
|
and is not counted by the corresponding
|
|
instance of the dot3StatsSingleCollisionFrames
|
|
object."
|
|
::= { snSwIfInfoEntry 33 }
|
|
|
|
snSwIfStatsTxColliFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of successfully transmitted frames on
|
|
a particular interface for which transmission
|
|
is inhibited by more than one collision.
|
|
|
|
A frame that is counted by a combination of
|
|
both dot3StatsSingleCollisionFrames and
|
|
dot3StatsMultipleCollisionFrames objects."
|
|
::= { snSwIfInfoEntry 34 }
|
|
|
|
snSwIfStatsRxColliFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of successfully received frames on
|
|
a particular interface for which transmission
|
|
is inhibited by more than one collision. This
|
|
object is not specified in dot3 but it has the
|
|
same functionarity as snSwIfStatsTxColliFrames."
|
|
::= { snSwIfInfoEntry 35 }
|
|
|
|
snSwIfStatsFrameTooLongs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"dot3StatsFrameTooLongs : A count of frames
|
|
received on a particular interface that
|
|
exceed the maximum permitted frame size.
|
|
|
|
The count represented by an instance of this
|
|
object is incremented when the frameTooLong
|
|
status is returned by the MAC service to the
|
|
LLC (or other MAC user). Received frames for
|
|
which multiple error conditions obtain are,
|
|
according to the conventions of IEEE 802.3
|
|
Layer Management, counted exclusively according
|
|
to the error status presented to the LLC."
|
|
::= { snSwIfInfoEntry 36 }
|
|
|
|
snSwIfStatsFrameTooShorts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" A count of frames received on a particular
|
|
interface that below the minimum permitted
|
|
frame size."
|
|
::= { snSwIfInfoEntry 37 }
|
|
|
|
snSwIfStatsInBcastFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of broadcast packets received on the interface."
|
|
::= { snSwIfInfoEntry 38 }
|
|
|
|
snSwIfStatsOutBcastFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of broadcast packets transmitted out of the interface."
|
|
::= { snSwIfInfoEntry 39 }
|
|
|
|
snSwIfStatsInMcastFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of multicast packets received on the interface."
|
|
::= { snSwIfInfoEntry 40 }
|
|
|
|
snSwIfStatsOutMcastFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of multicast packets transmitted out of the interface."
|
|
::= { snSwIfInfoEntry 41 }
|
|
|
|
snSwIfStatsInDiscard OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of inbound packets which were chosen
|
|
to be discarded even though no errors had been
|
|
detected to prevent their being deliverable to a
|
|
higher-layer protocol. One possible reason for
|
|
discarding such a packet could be to free up
|
|
buffer space."
|
|
::= { snSwIfInfoEntry 42 }
|
|
|
|
snSwIfStatsOutDiscard OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of outbound packets which were chosen
|
|
to be discarded even though no errors had been
|
|
detected to prevent their being transmitted. One
|
|
possible reason for discarding such a packet could
|
|
be to free up buffer space."
|
|
::= { snSwIfInfoEntry 43 }
|
|
|
|
snSwIfStatsMacStations OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of MAC Stations connected to the interface."
|
|
::= { snSwIfInfoEntry 44 }
|
|
|
|
snSwIfStatsLinkChange OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of link state change of the interface."
|
|
::= { snSwIfInfoEntry 45 }
|
|
|
|
snSwIfInOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of octets received on the interface,
|
|
including framing characters. This object is a 64-bit
|
|
counter of the ifInOctets object, defined in RFC 1213.
|
|
The octet string is in big-endian byte order."
|
|
::= { snSwIfInfoEntry 46 }
|
|
|
|
snSwIfOutOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of octets transmitted out of the interface,
|
|
including framing characters. This object is a 64-bit
|
|
counter of the ifOutOctets object, defined in RFC 1213.
|
|
The octet string is in big-endian byte order."
|
|
::= { snSwIfInfoEntry 47 }
|
|
|
|
snSwIfStatsInBitsPerSec OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bits per second received on the interface
|
|
over a 5 minutes interval."
|
|
::= { snSwIfInfoEntry 48 }
|
|
|
|
snSwIfStatsOutBitsPerSec OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bits per second transmitted out of the interface
|
|
over a 5 minutes interval."
|
|
::= { snSwIfInfoEntry 49 }
|
|
|
|
snSwIfStatsInPktsPerSec OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets per second received on the interface
|
|
over a 5 minutes interval."
|
|
::= { snSwIfInfoEntry 50 }
|
|
|
|
snSwIfStatsOutPktsPerSec OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets per second transmitted out of the interface
|
|
over a 5 minutes interval."
|
|
::= { snSwIfInfoEntry 51 }
|
|
|
|
snSwIfStatsInUtilization OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The input network utilization in hundredths of a percent
|
|
over a 5 minutes interval."
|
|
::= { snSwIfInfoEntry 52 }
|
|
|
|
snSwIfStatsOutUtilization OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The output network utilization in hundredths of a percent
|
|
over a 5 minutes interval."
|
|
::= { snSwIfInfoEntry 53 }
|
|
|
|
snSwIfStatsInKiloBitsPerSec OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bit rate in kilobits per second received on the 10G and
|
|
faster interface over a 5 minutes interval."
|
|
::= { snSwIfInfoEntry 54 }
|
|
|
|
snSwIfStatsOutKiloBitsPerSec OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bit rate in kilobits per second transmitted out of the 10G
|
|
and faster interface over a 5 minutes interval."
|
|
::= { snSwIfInfoEntry 55 }
|
|
|
|
snSwIfStatsInJumboFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of jumbo packets received on the interface."
|
|
::= { snSwIfInfoEntry 56 }
|
|
|
|
snSwIfStatsOutJumboFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of jumbo packets transmitted out of the interface."
|
|
::= { snSwIfInfoEntry 57 }
|
|
|
|
snSwIfInfoMirrorMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable mirror on this port."
|
|
::= { snSwIfInfoEntry 58 }
|
|
|
|
snSwIfMacLearningDisable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of MAC learning feature on an ethernet port.
|
|
For POS port, Get operation will return the default value and Set operation will return an error."
|
|
DEFVAL
|
|
{ false }
|
|
::= { snSwIfInfoEntry 59 }
|
|
|
|
|
|
-- Interface ID Registration Group
|
|
|
|
snInterfaceId OBJECT IDENTIFIER ::= { snSwPortInfo 2 }
|
|
snEthernetInterface OBJECT IDENTIFIER ::= { snInterfaceId 1 }
|
|
snPosInterface OBJECT IDENTIFIER ::= { snInterfaceId 2 }
|
|
snAtmInterface OBJECT IDENTIFIER ::= { snInterfaceId 3 }
|
|
snVirtualInterface OBJECT IDENTIFIER ::= { snInterfaceId 4 }
|
|
snLoopbackInterface OBJECT IDENTIFIER ::= { snInterfaceId 5 }
|
|
snGreTunnelInterface OBJECT IDENTIFIER ::= { snInterfaceId 6 }
|
|
snSubInterface OBJECT IDENTIFIER ::= { snInterfaceId 7 }
|
|
snMplsTunnelInterface OBJECT IDENTIFIER ::= { snInterfaceId 8 }
|
|
snPvcInterface OBJECT IDENTIFIER ::= { snInterfaceId 9 }
|
|
snMgmtEthernetInterface OBJECT IDENTIFIER ::= { snInterfaceId 10 }
|
|
snTrunkInterface OBJECT IDENTIFIER ::= { snInterfaceId 11 }
|
|
snVirtualMgmtInterface OBJECT IDENTIFIER ::= { snInterfaceId 12 }
|
|
sn6to4TunnelInterface OBJECT IDENTIFIER ::= { snInterfaceId 13 }
|
|
|
|
-- Interface ID to ifIndex Lookup Table
|
|
-- Given an interface ID, this table returns the ifIndex value.
|
|
--
|
|
-- Note: This table does not behave like most SNMP tables. It does not
|
|
-- support GetNext. If you try to walk the table using GetNext, no rows
|
|
-- will be returned. The contents of the table can only be accessed
|
|
-- using Get operations. The table is useful for mapping a known
|
|
-- interface to the corresponding ifIndex value.
|
|
|
|
snInterfaceLookupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnInterfaceLookupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { snSwPortInfo 3 }
|
|
|
|
snInterfaceLookupEntry OBJECT-TYPE
|
|
SYNTAX SnInterfaceLookupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { snInterfaceLookupInterfaceId }
|
|
::= { snInterfaceLookupTable 1 }
|
|
|
|
SnInterfaceLookupEntry ::= SEQUENCE {
|
|
snInterfaceLookupInterfaceId
|
|
InterfaceId,
|
|
snInterfaceLookupIfIndex
|
|
Integer32
|
|
}
|
|
|
|
snInterfaceLookupInterfaceId OBJECT-TYPE
|
|
SYNTAX InterfaceId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { snInterfaceLookupEntry 1 }
|
|
|
|
snInterfaceLookupIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { snInterfaceLookupEntry 2 }
|
|
|
|
|
|
-- ifIndex to Interface ID Lookup Table
|
|
-- Given an ifIndex, this table returns the interface ID value.
|
|
|
|
snIfIndexLookupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnIfIndexLookupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { snSwPortInfo 4 }
|
|
|
|
snIfIndexLookupEntry OBJECT-TYPE
|
|
SYNTAX SnIfIndexLookupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { snIfIndexLookupIfIndex }
|
|
::= { snIfIndexLookupTable 1 }
|
|
|
|
SnIfIndexLookupEntry ::= SEQUENCE {
|
|
snIfIndexLookupIfIndex
|
|
Integer32,
|
|
snIfIndexLookupInterfaceId
|
|
InterfaceId
|
|
}
|
|
|
|
snIfIndexLookupIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { snIfIndexLookupEntry 1 }
|
|
|
|
snIfIndexLookupInterfaceId OBJECT-TYPE
|
|
SYNTAX InterfaceId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { snIfIndexLookupEntry 2 }
|
|
|
|
-- Interface ID2 to ifIndex Lookup Table
|
|
-- Given an interface ID2, this table returns the ifIndex value.
|
|
--
|
|
-- Note: This table does not behave like most SNMP tables. It does not
|
|
-- support GetNext. If you try to walk the table using GetNext, no rows
|
|
-- will be returned. The contents of the table can only be accessed
|
|
-- using Get operations. The table is useful for mapping a known
|
|
-- interface to the corresponding ifIndex value.
|
|
|
|
snInterfaceLookup2Table OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnInterfaceLookup2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { snSwPortInfo 7 }
|
|
|
|
snInterfaceLookup2Entry OBJECT-TYPE
|
|
SYNTAX SnInterfaceLookup2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { snInterfaceLookup2InterfaceId }
|
|
::= { snInterfaceLookup2Table 1 }
|
|
|
|
SnInterfaceLookup2Entry ::= SEQUENCE {
|
|
snInterfaceLookup2InterfaceId
|
|
InterfaceId2,
|
|
snInterfaceLookup2IfIndex
|
|
Integer32
|
|
}
|
|
|
|
snInterfaceLookup2InterfaceId OBJECT-TYPE
|
|
SYNTAX InterfaceId2
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { snInterfaceLookup2Entry 1 }
|
|
|
|
snInterfaceLookup2IfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { snInterfaceLookup2Entry 2 }
|
|
|
|
|
|
-- ifIndex to Interface ID2 Lookup Table
|
|
-- Given an ifIndex, this table returns the interface ID2 value.
|
|
snIfIndexLookup2Table OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnIfIndexLookup2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { snSwPortInfo 8 }
|
|
|
|
snIfIndexLookup2Entry OBJECT-TYPE
|
|
SYNTAX SnIfIndexLookup2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { snIfIndexLookup2IfIndex }
|
|
::= { snIfIndexLookup2Table 1 }
|
|
|
|
SnIfIndexLookup2Entry ::= SEQUENCE {
|
|
snIfIndexLookup2IfIndex
|
|
Integer32,
|
|
snIfIndexLookup2InterfaceId
|
|
InterfaceId2
|
|
}
|
|
|
|
snIfIndexLookup2IfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { snIfIndexLookup2Entry 1 }
|
|
|
|
snIfIndexLookup2InterfaceId OBJECT-TYPE
|
|
SYNTAX InterfaceId2
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { snIfIndexLookup2Entry 2 }
|
|
|
|
-- ifIndex to Optical Parameters Table
|
|
-- Given an ifIndex, this table returns the optical parameters for the ifIndex.
|
|
|
|
snIfOpticalMonitoringInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnIfOpticalMonitoringInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table lists the instrumented parameters of all
|
|
optical interfaces."
|
|
REFERENCE
|
|
"ITU recommendations G.783, G.784, G.953"
|
|
|
|
::= { snSwPortInfo 6 }
|
|
|
|
snIfOpticalMonitoringInfoEntry OBJECT-TYPE
|
|
SYNTAX SnIfOpticalMonitoringInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Only the ifIndices of optical interfaces
|
|
whose parameters need to be monitored will
|
|
be used to index this table."
|
|
INDEX { ifIndex }
|
|
::= { snIfOpticalMonitoringInfoTable 1 }
|
|
|
|
SnIfOpticalMonitoringInfoEntry ::=
|
|
SEQUENCE {
|
|
snIfOpticalMonitoringTemperature
|
|
DisplayString,
|
|
snIfOpticalMonitoringTxPower
|
|
DisplayString,
|
|
snIfOpticalMonitoringRxPower
|
|
DisplayString,
|
|
snIfOpticalMonitoringTxBiasCurrent
|
|
DisplayString
|
|
}
|
|
|
|
snIfOpticalMonitoringTemperature OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object holds the value of the transmitter laser
|
|
diode temperature for the interface. This object
|
|
indicates the health of the transmitter.
|
|
|
|
The format is xxx.yyyy C(elcius), followed by whether
|
|
the measured value is normal, high/low alarm or
|
|
high/low warning.
|
|
For 100G LR4 and LR10 optic, this returns the average
|
|
temperature for all lanes."
|
|
::= { snIfOpticalMonitoringInfoEntry 1 }
|
|
|
|
snIfOpticalMonitoringTxPower OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object holds the value of the transmitter optical
|
|
signal power for the interface, measured in dBm, followed
|
|
by whether this is a normal value, or high/low warning
|
|
or alarm. For 100G LR4 and LR10 optic, this returns the aggregated
|
|
Tx Power for all lanes."
|
|
::= { snIfOpticalMonitoringInfoEntry 2 }
|
|
|
|
snIfOpticalMonitoringRxPower OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object holds the value of the receiver optical
|
|
signal power for the interface, measured in dBm, followed
|
|
by whether this is a normal value, or high/low warning
|
|
or alarm.
|
|
For 100G LR4 and LR10 optic, this returns the aggregated
|
|
Rx Power for all lanes."
|
|
::= { snIfOpticalMonitoringInfoEntry 3 }
|
|
|
|
snIfOpticalMonitoringTxBiasCurrent OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Tx Bias Current. It is measured in mA, and is followed
|
|
by whether this is a normal value, or high/low warning or
|
|
alarm.
|
|
For 100G LR4 and LR10 optic, this returns the aggregated
|
|
Tx Bias Current for all lanes."
|
|
::= { snIfOpticalMonitoringInfoEntry 4 }
|
|
|
|
--
|
|
-- Show Media Information
|
|
-- Information of the media device installed in the physical ports.
|
|
--
|
|
|
|
snIfMediaInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnIfMediaInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table lists the information of the media device
|
|
(SFP/XFP/Copper) installed in the physical port.
|
|
Only the ifIndices of Ethernet ports those are associated
|
|
with the operational cards will be included in this table."
|
|
::= { snSwPortInfo 9 }
|
|
|
|
snIfMediaInfoEntry OBJECT-TYPE
|
|
SYNTAX SnIfMediaInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the Interface Media Information table.
|
|
The ifIndices of ethernet interfaces will be used
|
|
to index this table."
|
|
INDEX { ifIndex }
|
|
::= { snIfMediaInfoTable 1 }
|
|
|
|
SnIfMediaInfoEntry ::=
|
|
SEQUENCE {
|
|
snIfMediaType
|
|
DisplayString,
|
|
snIfMediaVendorName
|
|
DisplayString,
|
|
snIfMediaVersion
|
|
DisplayString,
|
|
snIfMediaPartNumber
|
|
DisplayString,
|
|
snIfMediaSerialNumber
|
|
DisplayString
|
|
}
|
|
|
|
snIfMediaType OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the media installed in the physical port."
|
|
::= { snIfMediaInfoEntry 1 }
|
|
|
|
snIfMediaVendorName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The media vendor name, full name of the corporation."
|
|
::= { snIfMediaInfoEntry 2 }
|
|
|
|
snIfMediaVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The media vendor product version number."
|
|
::= { snIfMediaInfoEntry 3 }
|
|
|
|
snIfMediaPartNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The media vendor part number."
|
|
|
|
::= { snIfMediaInfoEntry 4 }
|
|
|
|
snIfMediaSerialNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vendor serial number of the media device."
|
|
::= { snIfMediaInfoEntry 5 }
|
|
|
|
-- Optical Parameters Table per lane for a 100G LR4 and LR10 optic.
|
|
|
|
snIfOpticalLaneMonitoringTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnIfOpticalLaneMonitoringEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table lists the instrumented parameters of all
|
|
lanes within a 100G optic of type LR4 and LR10.
|
|
LR4 has 4 lanes per optic, LR10 has 10 lanes per optic."
|
|
REFERENCE
|
|
"ITU recommendations G.783, G.784, G.953"
|
|
::= { snSwPortInfo 10 }
|
|
|
|
snIfOpticalLaneMonitoringEntry OBJECT-TYPE
|
|
SYNTAX SnIfOpticalLaneMonitoringEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Only the ifIndices of optical interfaces
|
|
whose parameters need to be monitored will
|
|
be used to index this table."
|
|
INDEX { ifIndex, snIfOpticalLaneMonitoringLane }
|
|
::= { snIfOpticalLaneMonitoringTable 1 }
|
|
|
|
SnIfOpticalLaneMonitoringEntry ::=
|
|
SEQUENCE {
|
|
snIfOpticalLaneMonitoringLane
|
|
Unsigned32,
|
|
snIfOpticalLaneMonitoringTemperature
|
|
DisplayString,
|
|
snIfOpticalLaneMonitoringTxPower
|
|
DisplayString,
|
|
snIfOpticalLaneMonitoringRxPower
|
|
DisplayString,
|
|
snIfOpticalLaneMonitoringTxBiasCurrent
|
|
DisplayString
|
|
}
|
|
|
|
snIfOpticalLaneMonitoringLane OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lane number of this 100G optic. LR4 has 4, and LR10 has
|
|
10 lanes."
|
|
::= { snIfOpticalLaneMonitoringEntry 1 }
|
|
|
|
snIfOpticalLaneMonitoringTemperature OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object holds the value of the transmitter laser
|
|
diode temperature for the lane in the interface. This
|
|
object indicates the health of the transmitter.
|
|
|
|
The format is xxx.yyyy C(elcius), followed by whether
|
|
the measured value is normal, high/low alarm or
|
|
high/low warning."
|
|
::= { snIfOpticalLaneMonitoringEntry 2 }
|
|
|
|
snIfOpticalLaneMonitoringTxPower OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object holds the value of the transmitter optical
|
|
signal power for the lane in the interface, measured in
|
|
dBm, followed by whether this is a normal value, or
|
|
high/low warning or alarm."
|
|
::= { snIfOpticalLaneMonitoringEntry 3 }
|
|
|
|
snIfOpticalLaneMonitoringRxPower OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object holds the value of the receiver optical
|
|
signal power for the lane in the interface, measured in
|
|
dBm, followed by whether this is a normal value, or
|
|
high/low warning or alarm."
|
|
::= { snIfOpticalLaneMonitoringEntry 4 }
|
|
|
|
snIfOpticalLaneMonitoringTxBiasCurrent OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Tx Bias Current. It is measured in mA, and is followed
|
|
by whether this is a normal value, or high/low warning or
|
|
alarm."
|
|
::= { snIfOpticalLaneMonitoringEntry 5 }
|
|
|
|
-- Forwarding Database Group
|
|
--
|
|
-- This group contains information relevant to
|
|
-- the forwarding database in the system.
|
|
|
|
|
|
|
|
-- The Forward Database Static Table Information
|
|
--
|
|
-- This table contains all MAC addresses in the system. Static
|
|
-- stations may be configured.
|
|
|
|
|
|
snFdbTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnFdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains snFdb information for each station
|
|
known to the system, one entry per station."
|
|
::= { snFdbInfo 1 }
|
|
|
|
snFdbEntry OBJECT-TYPE
|
|
SYNTAX SnFdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry represents the information of a static MAC station."
|
|
INDEX {
|
|
snFdbStationIndex
|
|
}
|
|
::= { snFdbTable 1 }
|
|
|
|
|
|
SnFdbEntry ::= SEQUENCE {
|
|
snFdbStationIndex
|
|
INTEGER,
|
|
snFdbStationAddr
|
|
PhysAddress,
|
|
snFdbStationPort
|
|
Integer32,
|
|
snFdbVLanId
|
|
INTEGER,
|
|
snFdbStationQos
|
|
INTEGER,
|
|
snFdbStationType
|
|
INTEGER,
|
|
snFdbRowStatus
|
|
INTEGER,
|
|
snFdbStationIf
|
|
InterfaceIndex
|
|
}
|
|
|
|
snFdbStationIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The FDB Station index to the Fdb Station Table."
|
|
::= { snFdbEntry 1 }
|
|
|
|
snFdbStationAddr OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The snFdbs physical address. The physical address
|
|
represents a MAC Station."
|
|
::= { snFdbEntry 2 }
|
|
|
|
|
|
snFdbStationPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Station slot/port number.
|
|
The bit 0 to bit 7: port number.
|
|
The bit 8 to bit 11: slot number (slot for chassis only)."
|
|
::= { snFdbEntry 3 }
|
|
|
|
|
|
snFdbVLanId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Station VLan ID."
|
|
::= { snFdbEntry 4 }
|
|
|
|
snFdbStationQos OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
level0(0),
|
|
level1(1),
|
|
level2(2),
|
|
level3(3),
|
|
level4(4),
|
|
level5(5),
|
|
level6(6),
|
|
level7(7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Stand alone stackable station Qos Priority values are:
|
|
low(0) -- low prority
|
|
high(1) -- high prority.
|
|
The BigIron switch station Priority values are:
|
|
level0(0), level1(1), level2(2), level3(3),
|
|
level4(4), level5(5), level6(6), level7(7) "
|
|
::= { snFdbEntry 5 }
|
|
|
|
snFdbStationType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notSupported(0),
|
|
host(1),
|
|
router(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The station type values are:
|
|
notSupported -- a read value only : this product does not
|
|
support MultiLayer Switching.
|
|
host -- any MAC station.
|
|
router -- a router-typed station."
|
|
::= { snFdbEntry 6 }
|
|
|
|
snFdbRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
valid(2),
|
|
delete(3),
|
|
create(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create and
|
|
delete row in the table and control
|
|
if they are used. The values
|
|
that can be written are:
|
|
delete(3)...deletes the row
|
|
create(4)...creates a new row
|
|
|
|
If the row exists, then a SET with
|
|
value of create(4) returns error
|
|
'badValue'. Deleted rows go away
|
|
immediately. The following values
|
|
can be returned on reads:
|
|
noSuch(0)...no such row
|
|
other(1)....some other case
|
|
valid(2)....the row exists and is valid"
|
|
::= { snFdbEntry 7 }
|
|
|
|
snFdbStationIf OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Station interface index."
|
|
::= { snFdbEntry 8 }
|
|
|
|
|
|
-- Port STP Configuration Group
|
|
-- snPortStpTable was deprecated. It has been replaced by snIfStpTable.
|
|
|
|
|
|
snPortStpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnPortStpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A specific snPortStpTable consists of a number of
|
|
switch ports. This table only exists if only if
|
|
snVLanByPortCfgTable exists and snVLanByPortCfgStpMode is
|
|
enabled for each VLAN."
|
|
::= { snPortStpInfo 1 }
|
|
|
|
snPortStpEntry OBJECT-TYPE
|
|
SYNTAX SnPortStpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"An entry in the snPortStpTable indicates the
|
|
configuration on a specified port. A SNMP SET PDU
|
|
for a row of the snPortStpTable requires the entired
|
|
sequence of the MIB Objects in each
|
|
snPortStpEntry stored in one PDU. Otherwise,
|
|
GENERR return-value will be returned."
|
|
INDEX {
|
|
snPortStpVLanId,
|
|
snPortStpPortNum
|
|
}
|
|
::= { snPortStpTable 1 }
|
|
|
|
SnPortStpEntry ::= SEQUENCE {
|
|
snPortStpVLanId
|
|
INTEGER,
|
|
snPortStpPortNum
|
|
Integer32,
|
|
snPortStpPortPriority
|
|
INTEGER,
|
|
snPortStpPathCost
|
|
INTEGER,
|
|
snPortStpOperState
|
|
INTEGER,
|
|
snPortStpPortEnable
|
|
INTEGER,
|
|
snPortStpPortForwardTransitions
|
|
Counter32,
|
|
snPortStpPortState
|
|
INTEGER,
|
|
snPortStpPortDesignatedCost
|
|
Integer32,
|
|
snPortStpPortDesignatedRoot
|
|
BridgeId,
|
|
snPortStpPortDesignatedBridge
|
|
BridgeId,
|
|
snPortStpPortDesignatedPort
|
|
OCTET STRING,
|
|
snPortStpPortAdminRstp
|
|
INTEGER,
|
|
snPortStpPortProtocolMigration
|
|
INTEGER,
|
|
snPortStpPortAdminEdgePort
|
|
INTEGER,
|
|
snPortStpPortAdminPointToPoint
|
|
INTEGER
|
|
}
|
|
|
|
snPortStpVLanId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The VLAN ID of the VLAN switch community."
|
|
::= { snPortStpEntry 1 }
|
|
|
|
snPortStpPortNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The port number of the Switch.
|
|
The bit 0 to bit 7: port number.
|
|
The bit 8 to bit 11: slot number (slot for chassis only)."
|
|
::= { snPortStpEntry 2 }
|
|
|
|
snPortStpPortPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The value of the priority field which is
|
|
contained in the first (in network byte order)
|
|
octet of the (2 octet long) Port ID. The other
|
|
octet of the Port ID is given by the value of
|
|
dot1dStpPort."
|
|
::= { snPortStpEntry 3 }
|
|
|
|
snPortStpPathCost OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"dot1dStpPortPathCost : The contribution of this
|
|
port to the path cost of paths towards the spanning
|
|
tree root which include this port. 802.1D-1990
|
|
recommends that the default value of this parameter
|
|
be in inverse proportion to the speed of the
|
|
attached LAN. Writing value zero to this object
|
|
sets path cost to a default value which automatically
|
|
changes according to port speed. Reading value zero
|
|
indicates an unknown path cost value because port
|
|
speed cannot be determined due to speed auto sense
|
|
in progress."
|
|
::= { snPortStpEntry 4 }
|
|
|
|
|
|
snPortStpOperState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notActivated(0),
|
|
activated(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"By default, this mode is set to notActivated(0).
|
|
notActivated(0)...the Port STP entry is not activated and not in running mode.
|
|
activated(1)......the Port STP entry is activated and in running mode"
|
|
::= { snPortStpEntry 5 }
|
|
|
|
snPortStpPortEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The enabled/disabled status of the port."
|
|
::= { snPortStpEntry 6 }
|
|
|
|
snPortStpPortForwardTransitions OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of times this port has transitioned
|
|
from the Learning state to the Forwarding state."
|
|
::= { snPortStpEntry 7 }
|
|
|
|
snPortStpPortState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
blocking(2),
|
|
listening(3),
|
|
learning(4),
|
|
forwarding(5),
|
|
broken(6),
|
|
preforwarding(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The port's current state as defined by
|
|
application of the Spanning Tree Protocol. This
|
|
state controls what action a port takes on
|
|
reception of a frame. If the bridge has detected
|
|
a port that is malfunctioning it will place that
|
|
port into the broken(6) state. For ports which
|
|
are disabled (see dot1dStpPortEnable), this object
|
|
will have a value of disabled(1)."
|
|
::= { snPortStpEntry 8 }
|
|
|
|
snPortStpPortDesignatedCost OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The path cost of the Designated Port of the
|
|
segment connected to this port. This value is
|
|
compared to the Root Path Cost field in received
|
|
bridge PDUs."
|
|
::= { snPortStpEntry 9 }
|
|
|
|
|
|
snPortStpPortDesignatedRoot OBJECT-TYPE
|
|
SYNTAX BridgeId
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The unique Bridge Identifier of the Bridge
|
|
recorded as the Root in the Configuration BPDUs
|
|
transmitted by the Designated Bridge for the
|
|
segment to which the port is attached."
|
|
::= { snPortStpEntry 10 }
|
|
|
|
snPortStpPortDesignatedBridge OBJECT-TYPE
|
|
SYNTAX BridgeId
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The Bridge Identifier of the bridge which this
|
|
port considers to be the Designated Bridge for
|
|
this port's segment."
|
|
::= { snPortStpEntry 11 }
|
|
|
|
snPortStpPortDesignatedPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (2))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The Port Identifier of the port on the Designated
|
|
Bridge for this port's segment."
|
|
::= { snPortStpEntry 12 }
|
|
|
|
snPortStpPortAdminRstp OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
true(1),
|
|
false(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Enable or disable RSTP of a port which is a member of a VLAN.
|
|
If the VLAN is not operating in RSTP, this object will return
|
|
FALSE(2) and this object is not writable."
|
|
::= { snPortStpEntry 13 }
|
|
|
|
snPortStpPortProtocolMigration OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
true(1),
|
|
false(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"When operating in RSTP (version 2) mode, writing TRUE(1)
|
|
to this object forces this port to transmit RSTP BPDUs.
|
|
Any other operation on this object has no effect and
|
|
it always returns FALSE(2) when read."
|
|
::= { snPortStpEntry 14 }
|
|
|
|
snPortStpPortAdminEdgePort OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
true(1),
|
|
false(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The administrative value of the Edge Port parameter. A
|
|
value of TRUE(1) indicates that this port should be
|
|
assumed as an edge-port and a value of FALSE(2) indicates
|
|
that this port should be assumed as a non-edge-port."
|
|
::= { snPortStpEntry 15 }
|
|
|
|
snPortStpPortAdminPointToPoint OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
true(1),
|
|
false(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The administrative point-to-point status of the LAN segment
|
|
attached to this port. A value of TRUE(1) indicates that
|
|
this port should always be treated as if it is connected to
|
|
a point-to-point link. A value of FALSE(2) indicates
|
|
that this port should be treated as having a shared media
|
|
connection."
|
|
::= { snPortStpEntry 16 }
|
|
|
|
-- Port STP Configuration Group
|
|
-- snIfStpTable is replacing snPortStpTable.
|
|
-- snIfStpPortNum is using ifIndex value to index snIfStpTable.
|
|
|
|
|
|
snIfStpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnIfStpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A specific snIfStpTable consists of a number of
|
|
switch ports. This table only exists if only if
|
|
snVLanByPortCfgTable exists and snVLanByPortCfgStpMode is
|
|
enabled for each VLAN."
|
|
::= { snPortStpInfo 2 }
|
|
|
|
snIfStpEntry OBJECT-TYPE
|
|
SYNTAX SnIfStpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the snIfStpTable indicates the
|
|
configuration on a specified port. A SNMP SET PDU
|
|
for a row of the snIfStpTable requires the entired
|
|
sequence of the MIB Objects in each
|
|
snIfStpEntry stored in one PDU. Otherwise,
|
|
GENERR return-value will be returned."
|
|
INDEX {
|
|
snIfStpVLanId,
|
|
snIfStpPortNum
|
|
}
|
|
::= { snIfStpTable 1 }
|
|
|
|
SnIfStpEntry ::= SEQUENCE {
|
|
snIfStpVLanId
|
|
INTEGER,
|
|
snIfStpPortNum
|
|
InterfaceIndex,
|
|
snIfStpPortPriority
|
|
INTEGER,
|
|
snIfStpCfgPathCost
|
|
INTEGER,
|
|
snIfStpOperState
|
|
INTEGER,
|
|
snIfStpPortState
|
|
INTEGER,
|
|
snIfStpPortDesignatedCost
|
|
Integer32,
|
|
snIfStpPortDesignatedRoot
|
|
BridgeId,
|
|
snIfStpPortDesignatedBridge
|
|
BridgeId,
|
|
snIfStpPortDesignatedPort
|
|
OCTET STRING,
|
|
snIfStpPortAdminRstp
|
|
TruthValue,
|
|
snIfStpPortProtocolMigration
|
|
TruthValue,
|
|
snIfStpPortAdminEdgePort
|
|
TruthValue,
|
|
snIfStpPortAdminPointToPoint
|
|
TruthValue,
|
|
snIfStpOperPathCost
|
|
INTEGER,
|
|
snIfStpPortRole
|
|
INTEGER,
|
|
snIfStpBPDUTransmitted
|
|
Counter32,
|
|
snIfStpBPDUReceived
|
|
Counter32,
|
|
snIfRstpConfigBPDUReceived
|
|
Counter32,
|
|
snIfRstpTCNBPDUReceived
|
|
Counter32,
|
|
snIfRstpConfigBPDUTransmitted
|
|
Counter32,
|
|
snIfRstpTCNBPDUTransmitted
|
|
Counter32
|
|
}
|
|
|
|
snIfStpVLanId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID of the VLAN switch community."
|
|
::= { snIfStpEntry 1 }
|
|
|
|
snIfStpPortNum OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number of the Switch. It has the ifIndex value."
|
|
::= { snIfStpEntry 2 }
|
|
|
|
snIfStpPortPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the priority field which is
|
|
contained in the first (in network byte order)
|
|
octet of the (2 octet long) Port ID. The other
|
|
octet of the Port ID is given by the value of
|
|
dot1dStpPort."
|
|
::= { snIfStpEntry 3 }
|
|
|
|
snIfStpCfgPathCost OBJECT-TYPE
|
|
SYNTAX INTEGER (0..200000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"dot1dStpPortPathCost : The contribution of this
|
|
port to the path cost of paths towards the spanning
|
|
tree root which include this port. 802.1D-1990
|
|
recommends that the default value of this parameter
|
|
be in inverse proportion to the speed of the
|
|
attached LAN. Writing value zero to this object
|
|
sets path cost to a default value which automatically
|
|
changes according to port speed."
|
|
::= { snIfStpEntry 4 }
|
|
|
|
|
|
snIfStpOperState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notActivated(0),
|
|
activated(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"By default, this mode is set to notActivated(0).
|
|
notActivated(0)...the Port STP entry is not activated and not in running mode.
|
|
activated(1)......the Port STP entry is activated and in running mode"
|
|
::= { snIfStpEntry 5 }
|
|
|
|
snIfStpPortState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
blocking(2),
|
|
listening(3),
|
|
learning(4),
|
|
forwarding(5),
|
|
broken(6),
|
|
preforwarding(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port's current state as defined by
|
|
application of the Spanning Tree Protocol. This
|
|
state controls what action a port takes on
|
|
reception of a frame. If the bridge has detected
|
|
a port that is malfunctioning it will place that
|
|
port into the broken(6) state. For ports which
|
|
are disabled (see dot1dStpPortEnable), this object
|
|
will have a value of disabled(1)."
|
|
::= { snIfStpEntry 8 }
|
|
|
|
snIfStpPortDesignatedCost OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The path cost of the Designated Port of the
|
|
segment connected to this port. This value is
|
|
compared to the Root Path Cost field in received
|
|
bridge PDUs."
|
|
::= { snIfStpEntry 9 }
|
|
|
|
|
|
snIfStpPortDesignatedRoot OBJECT-TYPE
|
|
SYNTAX BridgeId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique Bridge Identifier of the Bridge
|
|
recorded as the Root in the Configuration BPDUs
|
|
transmitted by the Designated Bridge for the
|
|
segment to which the port is attached."
|
|
::= { snIfStpEntry 10 }
|
|
|
|
snIfStpPortDesignatedBridge OBJECT-TYPE
|
|
SYNTAX BridgeId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Bridge Identifier of the bridge which this
|
|
port considers to be the Designated Bridge for
|
|
this port's segment."
|
|
::= { snIfStpEntry 11 }
|
|
|
|
snIfStpPortDesignatedPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (2))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Port Identifier of the port on the Designated
|
|
Bridge for this port's segment."
|
|
::= { snIfStpEntry 12 }
|
|
|
|
snIfStpPortAdminRstp OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable RSTP of a port which is a member of a VLAN.
|
|
If the VLAN is not operating in RSTP, this object will return
|
|
FALSE(2) and this object is not writable."
|
|
::= { snIfStpEntry 13 }
|
|
|
|
snIfStpPortProtocolMigration OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When operating in RSTP (version 2) mode, writing TRUE(1)
|
|
to this object forces this port to transmit RSTP BPDUs.
|
|
Any other operation on this object has no effect and
|
|
it always returns FALSE(2) when read."
|
|
::= { snIfStpEntry 14 }
|
|
|
|
snIfStpPortAdminEdgePort OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative value of the Edge Port parameter. A
|
|
value of TRUE(1) indicates that this port should be
|
|
assumed as an edge-port and a value of FALSE(2) indicates
|
|
that this port should be assumed as a non-edge-port."
|
|
::= { snIfStpEntry 15 }
|
|
|
|
snIfStpPortAdminPointToPoint OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative point-to-point status of the LAN segment
|
|
attached to this port. A value of TRUE(1) indicates that
|
|
this port should always be treated as if it is connected to
|
|
a point-to-point link. A value of FALSE(2) indicates
|
|
that this port should be treated as having a shared media
|
|
connection."
|
|
::= { snIfStpEntry 16 }
|
|
|
|
snIfStpOperPathCost OBJECT-TYPE
|
|
SYNTAX INTEGER (0..200000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"dot1dStpPortPathCost : The contribution of this
|
|
port to the path cost of paths towards the spanning
|
|
tree root which include this port. 802.1D-1990
|
|
recommends that the default value of this parameter
|
|
be in inverse proportion to the speed of the
|
|
attached LAN. Reading value zero indicates an unknown
|
|
path cost value because port speed cannot be determined
|
|
due to speed auto sense in progress or port link is down."
|
|
::= { snIfStpEntry 17 }
|
|
|
|
snIfStpPortRole OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(0),
|
|
alternate(1),
|
|
root(2),
|
|
designated(3),
|
|
backupRole(4),
|
|
disabledRole(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"STP/RSTP port role."
|
|
::= { snIfStpEntry 18 }
|
|
|
|
snIfStpBPDUTransmitted OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"STP/RSTP bridge protocol unit transmitted counter."
|
|
::= { snIfStpEntry 19 }
|
|
|
|
snIfStpBPDUReceived OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"STP/RSTP bridge protocol unit received counter."
|
|
::= { snIfStpEntry 20 }
|
|
|
|
snIfRstpConfigBPDUReceived OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RSTP configuration bridge protocol unit received counter."
|
|
::= { snIfStpEntry 21 }
|
|
|
|
snIfRstpTCNBPDUReceived OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RSTP topology change notification bridge protocol unit received counter."
|
|
::= { snIfStpEntry 22 }
|
|
|
|
snIfRstpConfigBPDUTransmitted OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RSTP configuration bridge protocol unit transmitted counter."
|
|
::= { snIfStpEntry 23 }
|
|
|
|
snIfRstpTCNBPDUTransmitted OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RSTP topology change notification bridge protocol unit transmitted counter."
|
|
::= { snIfStpEntry 24 }
|
|
|
|
|
|
-- Trunk Port Configuration Group
|
|
|
|
|
|
snTrunkTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnTrunkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A specific snTrunkTable consists of a number of
|
|
Trunk port-mask."
|
|
::= { snTrunkInfo 1 }
|
|
|
|
snTrunkEntry OBJECT-TYPE
|
|
SYNTAX SnTrunkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the snTrunkTable indicates the
|
|
configuration on a specified Trunk port membership."
|
|
INDEX {
|
|
snTrunkIndex
|
|
}
|
|
::= { snTrunkTable 1 }
|
|
|
|
SnTrunkEntry ::= SEQUENCE {
|
|
snTrunkIndex
|
|
Integer32,
|
|
snTrunkPortMask
|
|
PortMask,
|
|
snTrunkType
|
|
INTEGER
|
|
}
|
|
|
|
snTrunkIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of the trunk entries can be configured.
|
|
This can be 32*<slots> for Jetcore, and 16*<slots> for Ironcore."
|
|
::= { snTrunkEntry 1 }
|
|
|
|
|
|
snTrunkPortMask OBJECT-TYPE
|
|
SYNTAX PortMask
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Trunk membership of the Switch."
|
|
::= { snTrunkEntry 2 }
|
|
|
|
|
|
snTrunkType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
switch(1),
|
|
server(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The trunk connection type which specifies what
|
|
device the trunk ports are connected to."
|
|
::= { snTrunkEntry 3 }
|
|
|
|
|
|
-- Multi-slot Trunk Port Configuration Group
|
|
|
|
|
|
snMSTrunkTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnMSTrunkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table contains the configuration of port members of
|
|
multi-slot trunk groups."
|
|
::= { snTrunkInfo 2 }
|
|
|
|
snMSTrunkEntry OBJECT-TYPE
|
|
SYNTAX SnMSTrunkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of the snMSTrunkTable."
|
|
INDEX {snMSTrunkPortIndex}
|
|
::= { snMSTrunkTable 1 }
|
|
|
|
SnMSTrunkEntry ::= SEQUENCE {
|
|
snMSTrunkPortIndex
|
|
Integer32,
|
|
snMSTrunkPortList
|
|
OCTET STRING,
|
|
snMSTrunkType
|
|
INTEGER,
|
|
snMSTrunkRowStatus
|
|
INTEGER
|
|
}
|
|
|
|
snMSTrunkPortIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The primary port of a trunk group. For module with Gig ports,
|
|
primary port is port 1, 3, 5, 7. For module with 10/100 ports,
|
|
primary port is port 1, 5, 9, 13, 17, 21."
|
|
::= { snMSTrunkEntry 1 }
|
|
|
|
|
|
snMSTrunkPortList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of port indices which are the port membership
|
|
of a trunk group. Each port index is a 16-bit integer
|
|
in big endian order. The first port index must be the
|
|
primary port index."
|
|
::= { snMSTrunkEntry 2 }
|
|
|
|
|
|
snMSTrunkType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
switch(1),
|
|
server(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The trunk connection type which specifies what
|
|
device the trunk ports are connected to."
|
|
::= { snMSTrunkEntry 3 }
|
|
|
|
|
|
snMSTrunkRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
invalid(1),
|
|
valid(2),
|
|
delete(3),
|
|
create(4),
|
|
modify(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To create or delete a table entry."
|
|
::= { snMSTrunkEntry 4 }
|
|
|
|
-- Multi-slot Trunk Port Configuration Group
|
|
|
|
|
|
snMSTrunkIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnMSTrunkIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table contains the configuration of port members of
|
|
multi-slot trunk groups."
|
|
::= { snTrunkInfo 3 }
|
|
|
|
snMSTrunkIfEntry OBJECT-TYPE
|
|
SYNTAX SnMSTrunkIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of the snMSTrunkIfTable."
|
|
INDEX {snMSTrunkIfIndex}
|
|
::= { snMSTrunkIfTable 1 }
|
|
|
|
SnMSTrunkIfEntry ::= SEQUENCE {
|
|
snMSTrunkIfIndex
|
|
Integer32,
|
|
snMSTrunkIfList
|
|
OCTET STRING,
|
|
snMSTrunkIfType
|
|
INTEGER,
|
|
snMSTrunkIfRowStatus
|
|
INTEGER
|
|
}
|
|
|
|
snMSTrunkIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The primary port(IfIndex) of a trunk group. For module with Gig ports,
|
|
primary port is port 1, 3, 5, 7. For module with 10/100 ports,
|
|
primary port is port 1, 5, 9, 13, 17, 21."
|
|
::= { snMSTrunkIfEntry 1 }
|
|
|
|
snMSTrunkIfList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of interface indices which are the port membership
|
|
of a trunk group. Each interface index is a 16-bit integer
|
|
in big endian order. The first interface/port index must be
|
|
the primary port(ifIndex) index."
|
|
::= { snMSTrunkIfEntry 2 }
|
|
|
|
snMSTrunkIfType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
switch(1),
|
|
server(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The trunk connection type which specifies what
|
|
device the trunk ports are connected to."
|
|
::= { snMSTrunkIfEntry 3 }
|
|
|
|
snMSTrunkIfRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
invalid(1),
|
|
valid(2),
|
|
delete(3),
|
|
create(4),
|
|
modify(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To create or delete a table entry."
|
|
::= { snMSTrunkIfEntry 4 }
|
|
|
|
|
|
|
|
-- Switch Configuration Summary Group
|
|
|
|
|
|
snSwSummaryMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Switch Group Configuration Summary is configured
|
|
either enabled or disabled and the
|
|
default is disabled mode.
|
|
enabled(1)...........activate Switch Configuration Summary.
|
|
disabled(0)..........no Switch Configuration Summary."
|
|
::= { snSwSummary 1 }
|
|
|
|
|
|
--- DHCP Gateway List Table
|
|
|
|
|
|
snDhcpGatewayListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnDhcpGatewayListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of DHCP gateway list of addresses."
|
|
::= { snDhcpGatewayListInfo 1 }
|
|
|
|
snDhcpGatewayListEntry OBJECT-TYPE
|
|
SYNTAX SnDhcpGatewayListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the IP Port Address table."
|
|
INDEX { snDhcpGatewayListId }
|
|
::= { snDhcpGatewayListTable 1 }
|
|
|
|
SnDhcpGatewayListEntry ::= SEQUENCE {
|
|
snDhcpGatewayListId
|
|
INTEGER,
|
|
snDhcpGatewayListAddrList
|
|
OCTET STRING,
|
|
snDhcpGatewayListRowStatus
|
|
INTEGER
|
|
}
|
|
|
|
|
|
snDhcpGatewayListId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..32)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ID for a DHCP gateway list entry."
|
|
::= { snDhcpGatewayListEntry 1 }
|
|
|
|
snDhcpGatewayListAddrList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DHCP gateway address list for each DHCP gateway list ID.
|
|
This list contains 1 to 8 IP addresses represented by octet string."
|
|
::= { snDhcpGatewayListEntry 2 }
|
|
|
|
snDhcpGatewayListRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
valid(2),
|
|
delete(3),
|
|
create(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create and
|
|
delete row in the table and control
|
|
if they are used. The values
|
|
that can be written are:
|
|
delete(3)...deletes the row
|
|
create(4)...creates a new row or modifies an exsisting row
|
|
|
|
If the row exists, then a SET with
|
|
value of create(4) returns error
|
|
'badValue'. Deleted rows go away
|
|
immediately. The following values
|
|
can be returned on reads:
|
|
noSuch(0)...no such row
|
|
other(1)....some other case
|
|
valid(2)....the row exists and is valid"
|
|
::= { snDhcpGatewayListEntry 3 }
|
|
|
|
|
|
-- DNS MIB Group
|
|
-- snDnsDomainName and snDnsGatewayIpAddrList are deprecated, replaced
|
|
-- by fdryDnsDomainNameTable and fdryDnsServerAddressTable respectively.
|
|
-- The new table "fdryDnsDomainNameTable" and "fdryDnsServerAddressTable"
|
|
-- combines Ipv4 and Ipv6 DNS Servers configuration
|
|
|
|
snDnsDomainName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DNS Domain Name string."
|
|
::= { snDnsInfo 1 }
|
|
|
|
snDnsGatewayIpAddrList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DNS Gateway IP address list. This list contains 4
|
|
IP addresses represented by octet string."
|
|
::= { snDnsInfo 2 }
|
|
|
|
-- MAC filter table
|
|
|
|
snMacFilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnMacFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC filter table."
|
|
::= { snMacFilter 1 }
|
|
|
|
snMacFilterEntry OBJECT-TYPE
|
|
SYNTAX SnMacFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the MAC filter table."
|
|
INDEX { snMacFilterIndex }
|
|
::= { snMacFilterTable 1 }
|
|
|
|
SnMacFilterEntry ::= SEQUENCE {
|
|
snMacFilterIndex
|
|
Integer32,
|
|
snMacFilterAction
|
|
INTEGER,
|
|
snMacFilterSourceMac
|
|
MacAddress,
|
|
snMacFilterSourceMask
|
|
MacAddress,
|
|
snMacFilterDestMac
|
|
MacAddress,
|
|
snMacFilterDestMask
|
|
MacAddress,
|
|
snMacFilterOperator
|
|
INTEGER,
|
|
snMacFilterFrameType
|
|
INTEGER,
|
|
snMacFilterFrameTypeNum
|
|
INTEGER,
|
|
snMacFilterRowStatus
|
|
INTEGER
|
|
}
|
|
|
|
snMacFilterIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table index for a filter entry."
|
|
::= { snMacFilterEntry 1 }
|
|
|
|
snMacFilterAction OBJECT-TYPE
|
|
SYNTAX INTEGER { deny(0), permit(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Action to take if the Mac packet match
|
|
with this filter."
|
|
::= { snMacFilterEntry 2 }
|
|
|
|
snMacFilterSourceMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source MAC address."
|
|
::= { snMacFilterEntry 3 }
|
|
|
|
snMacFilterSourceMask OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source MAC subnet mask."
|
|
::= { snMacFilterEntry 4 }
|
|
|
|
snMacFilterDestMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Destination MAC address."
|
|
::= { snMacFilterEntry 5 }
|
|
|
|
snMacFilterDestMask OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Destination MAC subnet mask."
|
|
::= { snMacFilterEntry 6 }
|
|
|
|
snMacFilterOperator OBJECT-TYPE
|
|
SYNTAX INTEGER { equal(0), notEqual(1), less(2), greater(3) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of comparison to perform."
|
|
::= { snMacFilterEntry 7 }
|
|
|
|
snMacFilterFrameType OBJECT-TYPE
|
|
SYNTAX INTEGER{ notUsed(0), ethernet(1), llc(2), snap(3) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Frame Type: ethernet-type, LLC and SNAP types"
|
|
::= { snMacFilterEntry 8 }
|
|
|
|
snMacFilterFrameTypeNum OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Frame Type Number. 0 means NA"
|
|
::= { snMacFilterEntry 9 }
|
|
|
|
snMacFilterRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
invalid(1),
|
|
valid(2),
|
|
delete(3),
|
|
create(4),
|
|
modify(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create and
|
|
delete row in the table and control
|
|
if they are used. The values
|
|
that can be written are:
|
|
delete(3)...deletes the row
|
|
create(4)...creates a new row
|
|
modify(5)...modifies an exsisting row
|
|
|
|
If the row exists, then a SET with
|
|
value of create(4) returns error
|
|
'badValue'. Deleted rows go away
|
|
immediately. The following values
|
|
can be returned on reads:
|
|
noSuch(0)...no such row
|
|
invalid(1)...Setting it to 'invalid' has the effect of
|
|
rendering it inoperative..
|
|
valid(2)....the row exists and is valid"
|
|
::= { snMacFilterEntry 10 }
|
|
|
|
-- MAC Filter Port access table
|
|
|
|
snMacFilterPortAccessTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnMacFilterPortAccessEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"MAC Filter port access table."
|
|
::= { snMacFilter 2 }
|
|
|
|
snMacFilterPortAccessEntry OBJECT-TYPE
|
|
SYNTAX SnMacFilterPortAccessEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"An entry in the MAC Filter Port access table."
|
|
INDEX { snMacFilterPortAccessPortIndex }
|
|
::= { snMacFilterPortAccessTable 1 }
|
|
|
|
SnMacFilterPortAccessEntry ::= SEQUENCE {
|
|
snMacFilterPortAccessPortIndex
|
|
INTEGER,
|
|
snMacFilterPortAccessFilters
|
|
OCTET STRING,
|
|
snMacFilterPortAccessRowStatus
|
|
INTEGER
|
|
}
|
|
|
|
snMacFilterPortAccessPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..3900)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The port index.
|
|
For FastIron/NetIron products, port index value is from 1 to 42
|
|
For BigIron products, port index is an encoded number:
|
|
The bit 0 to bit 7: port number.
|
|
The bit 8 to bit 11: slot number.
|
|
For virtual router interface, slot number is 15,
|
|
port number is the virtual router port from 1 to 60.
|
|
Therefore, port index value for BigIron is from 257 to 3900."
|
|
::= { snMacFilterPortAccessEntry 1 }
|
|
|
|
snMacFilterPortAccessFilters OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"1st octet correspond to 1st filter
|
|
number and so on."
|
|
::= { snMacFilterPortAccessEntry 2 }
|
|
|
|
snMacFilterPortAccessRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
invalid(1),
|
|
valid(2),
|
|
delete(3),
|
|
create(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object is used to create and
|
|
delete row in the table and control
|
|
if they are used. The values
|
|
that can be written are:
|
|
delete(3)...deletes the row
|
|
create(4)...creates a new row
|
|
|
|
If the row exists, then a SET with
|
|
value of create(4) returns error
|
|
'badValue'. Deleted rows go away
|
|
immediately. The following values
|
|
can be returned on reads:
|
|
noSuch(0)...no such row
|
|
invalid(1)...Setting it to 'invalid' has the effect of
|
|
rendering it inoperative..
|
|
valid(2)....the row exists and is valid"
|
|
::= { snMacFilterPortAccessEntry 3 }
|
|
|
|
-- MAC Filter Port access table
|
|
|
|
snMacFilterIfAccessTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnMacFilterIfAccessEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC Filter port access table."
|
|
::= { snMacFilter 3 }
|
|
|
|
snMacFilterIfAccessEntry OBJECT-TYPE
|
|
SYNTAX SnMacFilterIfAccessEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the MAC Filter Port access table."
|
|
INDEX { snMacFilterIfAccessPortIndex }
|
|
::= { snMacFilterIfAccessTable 1 }
|
|
|
|
SnMacFilterIfAccessEntry ::= SEQUENCE {
|
|
snMacFilterIfAccessPortIndex
|
|
InterfaceIndex,
|
|
snMacFilterIfAccessFilters
|
|
OCTET STRING,
|
|
snMacFilterIfAccessRowStatus
|
|
INTEGER
|
|
}
|
|
|
|
snMacFilterIfAccessPortIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port/interface index."
|
|
::= { snMacFilterIfAccessEntry 1 }
|
|
|
|
snMacFilterIfAccessFilters OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"1st octet correspond to 1st filter number and so on."
|
|
::= { snMacFilterIfAccessEntry 2 }
|
|
|
|
snMacFilterIfAccessRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
invalid(1),
|
|
valid(2),
|
|
delete(3),
|
|
create(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create and
|
|
delete row in the table and control
|
|
if they are used. The values
|
|
that can be written are:
|
|
delete(3)...deletes the row
|
|
create(4)...creates a new row
|
|
|
|
If the row exists, then a SET with
|
|
value of create(4) returns error
|
|
'badValue'. Deleted rows go away
|
|
immediately. The following values
|
|
can be returned on reads:
|
|
noSuch(0)...no such row
|
|
invalid(1)...Setting it to 'invalid' has the effect of
|
|
rendering it inoperative..
|
|
valid(2)....the row exists and is valid"
|
|
::= { snMacFilterIfAccessEntry 3 }
|
|
|
|
-- NTP general group
|
|
|
|
snNTPGeneral OBJECT IDENTIFIER ::= { snNTP 1 }
|
|
|
|
snNTPPollInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interval specifies how often to poll the NTP server.
|
|
Each unit is one second.
|
|
This object is not supported in NI devices from R5.3"
|
|
DEFVAL { 1800 }
|
|
::= { snNTPGeneral 1 }
|
|
|
|
snNTPTimeZone OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
alaska(0),
|
|
aleutian(1),
|
|
arizona(2),
|
|
central(3),
|
|
eastIndiana(4),
|
|
eastern(5),
|
|
hawaii(6),
|
|
michigan(7),
|
|
mountain(8),
|
|
pacific(9),
|
|
samoa(10),
|
|
gmtPlus1200(11),
|
|
gmtPlus1100(12),
|
|
gmtPlus1000(13),
|
|
gmtPlus0900(14),
|
|
gmtPlus0800(15),
|
|
gmtPlus0700(16),
|
|
gmtPlus0600(17),
|
|
gmtPlus0500(18),
|
|
gmtPlus0400(19),
|
|
gmtPlus0300(20),
|
|
gmtPlus0200(21),
|
|
gmtPlus0100(22),
|
|
gmt(23),
|
|
gmtMinus0100(24),
|
|
gmtMinus0200(25),
|
|
gmtMinus0300(26),
|
|
gmtMinus0400(27),
|
|
gmtMinus0500(28),
|
|
gmtMinus0600(29),
|
|
gmtMinus0700(30),
|
|
gmtMinus0800(31),
|
|
gmtMinus0900(32),
|
|
gmtMinus1000(33),
|
|
gmtMinus1100(34),
|
|
gmtMinus1200(35),
|
|
gmtPlus1130(36),
|
|
gmtPlus1030(37),
|
|
gmtPlus0930(38),
|
|
gmtPlus0630(39),
|
|
gmtPlus0530(40),
|
|
gmtPlus0430(41),
|
|
gmtPlus0330(42),
|
|
gmtMinus0330(43),
|
|
gmtMinus0830(44),
|
|
gmtMinus0930(45)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time zone."
|
|
DEFVAL { gmt }
|
|
::= { snNTPGeneral 2 }
|
|
|
|
snNTPSummerTimeEnable OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled (1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/Disable daylight saving time. This enables daylight
|
|
saving time for time/date starting 02:00:00 of first Sunday
|
|
in April and ending 02:00:00 of last Sunday in October every
|
|
year."
|
|
DEFVAL { disabled }
|
|
::= { snNTPGeneral 3 }
|
|
|
|
snNTPSystemClock OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (7))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"System clock, in the following format:
|
|
octet 0: seconds after the minute [0-60]
|
|
octet 1: minutes after the hour [0-59]
|
|
octet 2: hours since midnight [0-23]
|
|
octet 3: day of the month [1-31]
|
|
octet 4: months since January [0-11]
|
|
octet 5: years since 1900
|
|
octet 6: days since Sunday [0-6]
|
|
Setting this object requires valid value in octets 0 to 5,
|
|
and zero in octet 6. System clock can be disabled by setting
|
|
zero to all octets."
|
|
::= { snNTPGeneral 4 }
|
|
|
|
snNTPSync OBJECT-TYPE
|
|
SYNTAX INTEGER { other(1), synchronize(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Initiate time synchronization to the NTP servers.
|
|
For set operation, only 'synchronize(2)' is accepted.
|
|
For get operation, always return 'other(1)'.
|
|
This object is not supported in NI devices from R5.3"
|
|
::= { snNTPGeneral 5 }
|
|
|
|
-- NTP server table
|
|
-- snNTPServerTable is deprecated, replaced by fdrySntpServerTable.
|
|
-- The new table "fdrySntpServerTable" combines Ipv4 and Ipv6 Simple Network Time Protocol server configuration.
|
|
|
|
snNTPServerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnNTPServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NTP (Network Time Protocol) server table."
|
|
::= { snNTP 2 }
|
|
|
|
snNTPServerEntry OBJECT-TYPE
|
|
SYNTAX SnNTPServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the NTP server table."
|
|
INDEX { snNTPServerIp }
|
|
::= { snNTPServerTable 1 }
|
|
|
|
SnNTPServerEntry ::= SEQUENCE {
|
|
snNTPServerIp
|
|
IpAddress,
|
|
snNTPServerVersion
|
|
INTEGER,
|
|
snNTPServerRowStatus
|
|
INTEGER
|
|
}
|
|
|
|
snNTPServerIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NTP server IP address."
|
|
::= { snNTPServerEntry 1 }
|
|
|
|
snNTPServerVersion OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NTP server version."
|
|
DEFVAL { 1 }
|
|
::= { snNTPServerEntry 2 }
|
|
|
|
snNTPServerRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
valid(2),
|
|
delete(3),
|
|
create(4) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To create or delete a NTP server table entry."
|
|
::= { snNTPServerEntry 3 }
|
|
|
|
-- Radius general group
|
|
|
|
snRadiusGeneral OBJECT IDENTIFIER ::= { snRadius 1 }
|
|
|
|
snRadiusSNMPAccess OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicate whether Radius group MIB obejcts can be
|
|
accessed by SNMP manager. If value is disabled,
|
|
all Radius group MIB objects return 'general error'."
|
|
DEFVAL { disabled }
|
|
::= { snRadiusGeneral 1 }
|
|
|
|
snRadiusEnableTelnetAuth OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/Disable telnet authentication specified
|
|
by 'snRadiusLoginMethod'."
|
|
DEFVAL { disabled }
|
|
::= { snRadiusGeneral 2 }
|
|
|
|
snRadiusRetransmit OBJECT-TYPE
|
|
SYNTAX INTEGER (0..5)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of authentication query retransmissions
|
|
to the Radius server."
|
|
DEFVAL { 3 }
|
|
::= { snRadiusGeneral 3 }
|
|
|
|
snRadiusTimeOut OBJECT-TYPE
|
|
SYNTAX INTEGER (1..60)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interval specifies how long to wait for authentication
|
|
reply from the Radius server, each unit is one second."
|
|
DEFVAL { 3 }
|
|
::= { snRadiusGeneral 4 }
|
|
|
|
snRadiusDeadTime OBJECT-TYPE
|
|
SYNTAX INTEGER (1..5)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interval specifies Radius server dead time,
|
|
each unit is one minute."
|
|
DEFVAL { 3 }
|
|
::= { snRadiusGeneral 5 }
|
|
|
|
snRadiusKey OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Authentication key displayed as encrypted text.
|
|
Write operation can only be done if the SET request uses
|
|
SNMPv3 with data encrypted using privacy key.
|
|
FastIron and NetIron platforms support keysize upto 64 characters."
|
|
::= { snRadiusGeneral 6 }
|
|
|
|
snRadiusLoginMethod OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..7))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A sequence of authentication methods. Each octet represents
|
|
a method to authenticate the user login process. Each octet
|
|
has the following enumeration value:
|
|
enable(1) - authenticate by command line interface
|
|
enable password
|
|
radius(2) - authenticate by requesting radius server
|
|
local(3) - authenticate by local user account table
|
|
line(4) - authenticate by telnet password
|
|
tacplus(5) - authenticate by requesting tacplus server
|
|
none(6) - do not authenticate
|
|
tacacs(7) - authenticate by requesting tacacs server
|
|
Setting a zero length octet string invalidates all
|
|
previous authentication methods."
|
|
::= { snRadiusGeneral 7 }
|
|
|
|
snRadiusEnableMethod OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..7))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A sequence of authentication methods. Each octet represents
|
|
a method to authenticate the user entering priviledge mode
|
|
of the command line interface. Each octet has the following
|
|
enumeration value:
|
|
enable(1) - authenticate by command line interface
|
|
enable password
|
|
radius(2) - authenticate by requesting radius server
|
|
local(3) - authenticate by local user account table
|
|
line(4) - authenticate by telnet password
|
|
tacplus(5) - authenticate by requesting tacplus server
|
|
none(6) - do not authenticate
|
|
tacacs(7) - authenticate by requesting tacacs server
|
|
Setting a zero length octet string invalidates all
|
|
previous authentication methods."
|
|
::= { snRadiusGeneral 8 }
|
|
|
|
snRadiusWebServerMethod OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..7))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A sequence of authentication methods. Each octet represents
|
|
a method to authenticate the user accessing the web-server.
|
|
Each octet has the following enumeration value:
|
|
enable(1) - authenticate by command line interface
|
|
enable password
|
|
radius(2) - authenticate by requesting radius server
|
|
local(3) - authenticate by local user account table
|
|
line(4) - authenticate by telnet password
|
|
tacplus(5) - authenticate by requesting tacplus server
|
|
none(6) - do not authenticate
|
|
tacacs(7) - authenticate by requesting tacacs server
|
|
Setting a zero length octet string invalidates all
|
|
previous authentication methods."
|
|
::= { snRadiusGeneral 9 }
|
|
|
|
snRadiusSNMPServerMethod OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..7))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A sequence of authentication methods. Each octet represents
|
|
a method to authenticate the user accessing the snmp-server.
|
|
Each octet has the following enumeration value:
|
|
enable(1) - authenticate by command line interface
|
|
enable password
|
|
radius(2) - authenticate by requesting radius server
|
|
local(3) - authenticate by local user account table
|
|
line(4) - authenticate by telnet password
|
|
tacplus(5) - authenticate by requesting tacplus server
|
|
none(6) - do not authenticate
|
|
tacacs(7) - authenticate by requesting tacacs server
|
|
Setting a zero length octet string invalidates all
|
|
previous authentication methods."
|
|
::= { snRadiusGeneral 10 }
|
|
|
|
-- Radius server table
|
|
-- snRadiusServerTable is deprecated, replaced by fdryRadiusServerTable
|
|
-- The new table "fdryRadiusServerTable" combines Ipv4 and Ipv6 Radius Authentication Servers configuration
|
|
|
|
snRadiusServerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnRadiusServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Radius server table."
|
|
::= { snRadius 2 }
|
|
|
|
snRadiusServerEntry OBJECT-TYPE
|
|
SYNTAX SnRadiusServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the Radius server table."
|
|
INDEX { snRadiusServerIp }
|
|
::= { snRadiusServerTable 1 }
|
|
|
|
SnRadiusServerEntry ::= SEQUENCE {
|
|
snRadiusServerIp
|
|
IpAddress,
|
|
snRadiusServerAuthPort
|
|
Integer32,
|
|
snRadiusServerAcctPort
|
|
Integer32,
|
|
snRadiusServerRowStatus
|
|
INTEGER,
|
|
snRadiusServerRowKey
|
|
DisplayString,
|
|
snRadiusServerUsage
|
|
INTEGER
|
|
}
|
|
|
|
snRadiusServerIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Radius server IP address."
|
|
::= { snRadiusServerEntry 1 }
|
|
|
|
snRadiusServerAuthPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Authentication UDP port number."
|
|
DEFVAL { 1812 }
|
|
::= { snRadiusServerEntry 2 }
|
|
|
|
snRadiusServerAcctPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Account UDP port number."
|
|
DEFVAL { 1813 }
|
|
::= { snRadiusServerEntry 3 }
|
|
|
|
snRadiusServerRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
valid(2),
|
|
delete(3),
|
|
create(4) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To create or delete a Radius server table entry."
|
|
::= { snRadiusServerEntry 4 }
|
|
|
|
snRadiusServerRowKey OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Authentication key displayed as encrypted text.
|
|
FastIron and NetIron platforms support keysize upto 64 characters."
|
|
::= { snRadiusServerEntry 5 }
|
|
|
|
snRadiusServerUsage OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
default(1),
|
|
authenticationOnly(2),
|
|
authorizationOnly(3),
|
|
accountingOnly(4) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To allow this server to be dedicated for a particular AAA activity."
|
|
::= { snRadiusServerEntry 6 }
|
|
|
|
--- Tacacs General MIBs
|
|
|
|
snTacacsGeneral OBJECT IDENTIFIER ::= { snTacacs 1 }
|
|
|
|
snTacacsRetransmit OBJECT-TYPE
|
|
SYNTAX INTEGER (0..5)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of authentication query retransmissions
|
|
to the Tacacs server."
|
|
DEFVAL { 3 }
|
|
::= { snTacacsGeneral 1 }
|
|
|
|
snTacacsTimeOut OBJECT-TYPE
|
|
SYNTAX INTEGER (1..15)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interval specifies how long to wait for authentication
|
|
reply from the Tacacs server, each unit is one second."
|
|
DEFVAL { 3 }
|
|
::= { snTacacsGeneral 2 }
|
|
|
|
snTacacsDeadTime OBJECT-TYPE
|
|
SYNTAX INTEGER (1..5)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interval specifies Tacacs server dead time,
|
|
each unit is one minute."
|
|
DEFVAL { 3 }
|
|
::= { snTacacsGeneral 3 }
|
|
|
|
snTacacsKey OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Authentication key displayed as encrypted text.
|
|
Write operation can only be done if the SET request uses
|
|
SNMPv3 with data encrypted using privacy key.
|
|
FastIron and NetIron platforms support keysize upto 64 characters."
|
|
::= { snTacacsGeneral 4 }
|
|
|
|
snTacacsSNMPAccess OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicate whether Tacacs group MIB obejcts can be
|
|
accessed by SNMP manager. If value is disabled,
|
|
all Tacacs group MIB objects return 'general error'."
|
|
DEFVAL { disabled }
|
|
::= { snTacacsGeneral 5 }
|
|
|
|
-- Tacacs server table
|
|
-- snTacacsServerTable is deprecated, replaced by fdryTacacsServerTable
|
|
-- The new table "fdryTacacsServerTable" combines Ipv4 and Ipv6 Tacacs Authentication Servers configuration
|
|
|
|
snTacacsServerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnTacacsServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Tacacs server table."
|
|
::= { snTacacs 2 }
|
|
|
|
snTacacsServerEntry OBJECT-TYPE
|
|
SYNTAX SnTacacsServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the Tacacs server table."
|
|
INDEX { snTacacsServerIp }
|
|
::= { snTacacsServerTable 1 }
|
|
|
|
SnTacacsServerEntry ::= SEQUENCE {
|
|
snTacacsServerIp
|
|
IpAddress,
|
|
snTacacsServerAuthPort
|
|
Integer32,
|
|
snTacacsServerRowStatus
|
|
INTEGER,
|
|
snTacacsServerRowKey
|
|
DisplayString,
|
|
snTacacsServerUsage
|
|
INTEGER
|
|
}
|
|
|
|
snTacacsServerIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Tacacs server IP address."
|
|
::= { snTacacsServerEntry 1 }
|
|
|
|
snTacacsServerAuthPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Authentication UDP port number."
|
|
DEFVAL { 49 }
|
|
::= { snTacacsServerEntry 2 }
|
|
|
|
snTacacsServerRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
valid(2),
|
|
delete(3),
|
|
create(4) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To create or delete a Tacacs server table entry."
|
|
::= { snTacacsServerEntry 3 }
|
|
|
|
snTacacsServerRowKey OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Authentication key displayed as encrypted text.
|
|
Write operation can only be done if the SET request uses
|
|
SNMPv3 with data encrypted using privacy key.
|
|
FastIron and NetIron platforms support keysize upto 64 characters."
|
|
::= { snTacacsServerEntry 4 }
|
|
|
|
snTacacsServerUsage OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
default(1),
|
|
authenticationOnly(2),
|
|
authorizationOnly(3),
|
|
accountingOnly(4) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To allow this server to be dedicated for a particular AAA activity."
|
|
::= { snTacacsServerEntry 5 }
|
|
|
|
-- QOS Profile Group
|
|
|
|
snQosProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnQosProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table contains the configuration of qos profile
|
|
groups."
|
|
::= { snQos 1 }
|
|
|
|
snQosProfileEntry OBJECT-TYPE
|
|
SYNTAX SnQosProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of the snQosProfileTable."
|
|
INDEX {snQosProfileIndex}
|
|
::= { snQosProfileTable 1 }
|
|
|
|
SnQosProfileEntry ::= SEQUENCE {
|
|
snQosProfileIndex
|
|
INTEGER,
|
|
snQosProfileName
|
|
DisplayString,
|
|
snQosProfileRequestedBandwidth
|
|
INTEGER,
|
|
snQosProfileCalculatedBandwidth
|
|
INTEGER
|
|
}
|
|
|
|
snQosProfileIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table index of QOS Profile."
|
|
::= { snQosProfileEntry 1 }
|
|
|
|
snQosProfileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Qos Profile Name string."
|
|
::= { snQosProfileEntry 2 }
|
|
|
|
snQosProfileRequestedBandwidth OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Qos Profile Requested Bandwidth."
|
|
::= { snQosProfileEntry 3 }
|
|
|
|
snQosProfileCalculatedBandwidth OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Qos Profile Calculated Bandwidth."
|
|
::= { snQosProfileEntry 4 }
|
|
|
|
-- QOS Bind Group
|
|
|
|
snQosBindTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnQosBindEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table contains the configuration of 802.1p to qos profile
|
|
binding groups."
|
|
::= { snQos 2 }
|
|
|
|
snQosBindEntry OBJECT-TYPE
|
|
SYNTAX SnQosBindEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of the snQosBindTable."
|
|
INDEX {snQosBindIndex}
|
|
::= { snQosBindTable 1 }
|
|
|
|
SnQosBindEntry ::= SEQUENCE {
|
|
snQosBindIndex
|
|
INTEGER,
|
|
snQosBindPriority
|
|
Integer32,
|
|
snQosBindProfileIndex
|
|
INTEGER
|
|
}
|
|
|
|
snQosBindIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table index of QOS Bind."
|
|
::= { snQosBindEntry 1 }
|
|
|
|
snQosBindPriority OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"QOS bind priority."
|
|
::= { snQosBindEntry 2 }
|
|
|
|
snQosBindProfileIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"QOS Bind Profile Index. This is pointer to the
|
|
index of snQosProfile Table."
|
|
::= { snQosBindEntry 3 }
|
|
|
|
-- Denial of service attack
|
|
|
|
snDosAttack OBJECT IDENTIFIER ::= { snQos 3 }
|
|
snDosAttackGlobal OBJECT IDENTIFIER ::= { snDosAttack 1 }
|
|
|
|
snDosAttackICMPDropCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ICMP drop counter."
|
|
::= { snDosAttackGlobal 1 }
|
|
|
|
snDosAttackICMPBlockCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ICMP block counter."
|
|
::= { snDosAttackGlobal 2 }
|
|
|
|
snDosAttackSYNDropCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SYN drop counter."
|
|
::= { snDosAttackGlobal 3 }
|
|
|
|
snDosAttackSYNBlockCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SYN block counter."
|
|
::= { snDosAttackGlobal 4 }
|
|
|
|
snDosAttackPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnDosAttackPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denial of service attack port table."
|
|
::= { snDosAttack 2 }
|
|
|
|
snDosAttackPortEntry OBJECT-TYPE
|
|
SYNTAX SnDosAttackPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of the denial of service attack port table."
|
|
INDEX {snDosAttackPort}
|
|
::= { snDosAttackPortTable 1 }
|
|
|
|
SnDosAttackPortEntry ::= SEQUENCE {
|
|
snDosAttackPort
|
|
Integer32,
|
|
snDosAttackPortICMPDropCount
|
|
Counter32,
|
|
snDosAttackPortICMPBlockCount
|
|
Counter32,
|
|
snDosAttackPortSYNDropCount
|
|
Counter32,
|
|
snDosAttackPortSYNBlockCount
|
|
Counter32
|
|
}
|
|
|
|
snDosAttackPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ifIndex value of a port."
|
|
::= { snDosAttackPortEntry 1 }
|
|
|
|
snDosAttackPortICMPDropCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ICMP drop counter."
|
|
::= { snDosAttackPortEntry 2 }
|
|
|
|
snDosAttackPortICMPBlockCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ICMP block counter."
|
|
::= { snDosAttackPortEntry 3 }
|
|
|
|
snDosAttackPortSYNDropCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SYN drop counter."
|
|
::= { snDosAttackPortEntry 4 }
|
|
|
|
snDosAttackPortSYNBlockCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SYN block counter."
|
|
::= { snDosAttackPortEntry 5 }
|
|
|
|
-- AAA Mib
|
|
|
|
snAuthentication OBJECT IDENTIFIER ::= { snAAA 1 }
|
|
snAuthorization OBJECT IDENTIFIER ::= { snAAA 2 }
|
|
snAccounting OBJECT IDENTIFIER ::= { snAAA 3 }
|
|
|
|
snAuthorizationCommandMethods OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..3))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A sequence of authorization methods. Each octet represents
|
|
a method to authorize the user command. Each octet
|
|
has the following value:
|
|
radius(2) - authorize by requesting radius server
|
|
tacplus(5) - authorize by requesting tacplus server
|
|
none(6) - skip authorization
|
|
Setting a zero length octet string invalidates all
|
|
previous authorization methods."
|
|
::= { snAuthorization 1 }
|
|
|
|
snAuthorizationCommandLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
level0(0),
|
|
level4(4),
|
|
level5(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Commands, which are equal to and less than the specified
|
|
command level here needs to be authorized. Possible enumeration
|
|
values:
|
|
0 - Privilege level 0
|
|
4 - Privilege level 4
|
|
5 - Privilege level 5."
|
|
::= { snAuthorization 2 }
|
|
|
|
snAuthorizationExec OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..3))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A sequence of exec authorization methods. Each octet represents
|
|
a method for telnet or SSH login authorization. Each octet
|
|
has the following enumeration value:
|
|
radius(2) - send exec authorization request to radius server
|
|
tacplus(5) - send exec authorization request to tacplus server
|
|
none(6) - no exec authorization
|
|
Setting a zero length octet string invalidates all
|
|
authorization methods."
|
|
::= { snAuthorization 3 }
|
|
|
|
|
|
snAccountingCommandMethods OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..3))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A sequence of accounting methods. Each octet represents
|
|
a method to account for the user command. Each octet
|
|
has the following enumeration value:
|
|
radius(2) - send accounting info to radius server
|
|
tacplus(5) - send accounting info to tacplus server
|
|
none(6) - skip accounting
|
|
Setting a zero length octet string invalidates all
|
|
previous accounting methods."
|
|
::= { snAccounting 1 }
|
|
|
|
snAccountingCommandLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
level0(0),
|
|
level4(4),
|
|
level5(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Commands, which are equal to and less than the specified
|
|
command level here will be accounted. Possible enumeration
|
|
values:
|
|
level0 - Privilege level 0
|
|
level4 - Privilege level 4
|
|
level5 - Privilege level 5."
|
|
::= { snAccounting 2 }
|
|
|
|
snAccountingExec OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..3))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A sequence of accounting methods. Each octet represents
|
|
a method for telnet or SSH login accounting. Each octet
|
|
has the following enumeration value:
|
|
radius(2) - send accounting info to radius server
|
|
tacplus(5) - send accounting info to tacplus server
|
|
none(6) - skip accounting
|
|
Setting a zero length octet string invalidates all
|
|
previous accounting methods."
|
|
::= { snAccounting 3 }
|
|
|
|
snAccountingSystem OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..3))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A sequence of accounting methods. Each octet represents
|
|
a method to account for the system related events. Each octet
|
|
has the following enumeration value:
|
|
radius(2) - send accounting info to radius server
|
|
tacplus(5) - send accounting info to tacplus server
|
|
none(6) - skip accounting
|
|
Setting a zero length octet string invalidates all
|
|
previous accounting methods."
|
|
::= { snAccounting 4 }
|
|
|
|
-- NetFlow Mib
|
|
|
|
snNetFlowGlb OBJECT IDENTIFIER ::= { snNetFlow 1 }
|
|
|
|
snNetFlowGblEnable OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable NetFlow export operation."
|
|
DEFVAL { disabled }
|
|
::= { snNetFlowGlb 1 }
|
|
|
|
snNetFlowGblVersion OBJECT-TYPE
|
|
SYNTAX INTEGER { versionNotSet (0), version1 (1), version5 (5) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NetFlow export version."
|
|
DEFVAL { version5 }
|
|
::= { snNetFlowGlb 2 }
|
|
|
|
snNetFlowGblProtocolDisable OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"bit 0 - other, disable all protocols export except UDP and TCP
|
|
bit 1 - tcp, disable TCP protocol export
|
|
bit 2 - udp, disable UDP protocol export"
|
|
DEFVAL { 0 }
|
|
::= { snNetFlowGlb 3 }
|
|
|
|
snNetFlowGblActiveTimeout OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum time an active flow can be in the NetFlow cache (minutes: 1..60)"
|
|
DEFVAL { 60 }
|
|
::= { snNetFlowGlb 4 }
|
|
|
|
snNetFlowGblInactiveTimeout OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum time an inactive flow can be in the NetFlow cache (seconds: 10..600)"
|
|
DEFVAL { 60 }
|
|
::= { snNetFlowGlb 5 }
|
|
|
|
|
|
-- NetFlow Collector Table
|
|
|
|
|
|
snNetFlowCollectorTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnNetFlowCollectorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of each NetFlow collector information."
|
|
::= { snNetFlow 2 }
|
|
|
|
snNetFlowCollectorEntry OBJECT-TYPE
|
|
SYNTAX SnNetFlowCollectorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the NetFlow collector table."
|
|
INDEX { snNetFlowCollectorIndex }
|
|
::= { snNetFlowCollectorTable 1 }
|
|
|
|
SnNetFlowCollectorEntry ::= SEQUENCE {
|
|
snNetFlowCollectorIndex
|
|
INTEGER,
|
|
snNetFlowCollectorIp
|
|
IpAddress,
|
|
snNetFlowCollectorUdpPort
|
|
Integer32,
|
|
snNetFlowCollectorSourceInterface
|
|
InterfaceIndex,
|
|
snNetFlowCollectorRowStatus
|
|
INTEGER
|
|
}
|
|
|
|
snNetFlowCollectorIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index to the NetFlow collector table."
|
|
::= { snNetFlowCollectorEntry 1 }
|
|
|
|
snNetFlowCollectorIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NetFlow collector ip address."
|
|
::= { snNetFlowCollectorEntry 2 }
|
|
|
|
snNetFlowCollectorUdpPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NetFlow collector UDP port number."
|
|
::= { snNetFlowCollectorEntry 3 }
|
|
|
|
snNetFlowCollectorSourceInterface OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex value to specify source port to
|
|
export NetFlow packet. Value 0 to indicate
|
|
default outgoing port."
|
|
::= { snNetFlowCollectorEntry 4 }
|
|
|
|
|
|
snNetFlowCollectorRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
valid(2),
|
|
delete(3),
|
|
create(4) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To create or delete a NetFlow collector table entry."
|
|
::= { snNetFlowCollectorEntry 5 }
|
|
|
|
|
|
|
|
-- NetFlow Aggregation Table
|
|
|
|
|
|
snNetFlowAggregationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnNetFlowAggregationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of each NetFlow aggregation scheme information."
|
|
::= { snNetFlow 3 }
|
|
|
|
snNetFlowAggregationEntry OBJECT-TYPE
|
|
SYNTAX SnNetFlowAggregationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the NetFlow Aggregation table."
|
|
INDEX { snNetFlowAggregationIndex }
|
|
::= { snNetFlowAggregationTable 1 }
|
|
|
|
SnNetFlowAggregationEntry ::= SEQUENCE {
|
|
snNetFlowAggregationIndex
|
|
INTEGER,
|
|
snNetFlowAggregationIp
|
|
IpAddress,
|
|
snNetFlowAggregationUdpPort
|
|
Integer32,
|
|
snNetFlowAggregationSourceInterface
|
|
InterfaceIndex,
|
|
snNetFlowAggregationNumberOfCacheEntries
|
|
Integer32,
|
|
snNetFlowAggregationActiveTimeout
|
|
Integer32,
|
|
snNetFlowAggregationInactiveTimeout
|
|
Integer32,
|
|
snNetFlowAggregationEnable
|
|
INTEGER,
|
|
snNetFlowAggregationRowStatus
|
|
INTEGER
|
|
}
|
|
|
|
snNetFlowAggregationIndex OBJECT-TYPE
|
|
SYNTAX INTEGER { as (1), protocolPort (2), destPrefix (3),
|
|
sourcePrefix (4), prefix (5) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Aggregation scheme ID"
|
|
::= { snNetFlowAggregationEntry 1 }
|
|
|
|
snNetFlowAggregationIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NetFlow aggregation collector ip address."
|
|
::= { snNetFlowAggregationEntry 2 }
|
|
|
|
snNetFlowAggregationUdpPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NetFlow aggregation collector UDP port number."
|
|
::= { snNetFlowAggregationEntry 3 }
|
|
|
|
snNetFlowAggregationSourceInterface OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex value to specify source port to
|
|
export NetFlow aggregation packet.
|
|
Value 0 to indicate default outgoing port."
|
|
::= { snNetFlowAggregationEntry 4 }
|
|
|
|
snNetFlowAggregationNumberOfCacheEntries OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of cache entries for aggregation scheme"
|
|
::= { snNetFlowAggregationEntry 5 }
|
|
|
|
snNetFlowAggregationActiveTimeout OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum time an active flow can be in
|
|
the aggregation cache"
|
|
::= { snNetFlowAggregationEntry 6 }
|
|
|
|
snNetFlowAggregationInactiveTimeout OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum time an inactive flow can be in
|
|
the aggregation cache"
|
|
::= { snNetFlowAggregationEntry 7 }
|
|
|
|
snNetFlowAggregationEnable OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable NetFlow aggregation
|
|
for this aggregation scheme."
|
|
DEFVAL { disabled }
|
|
::= { snNetFlowAggregationEntry 8 }
|
|
|
|
snNetFlowAggregationRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
valid(2),
|
|
delete(3),
|
|
create(4) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To create or delete a NetFlow collector table entry."
|
|
::= { snNetFlowAggregationEntry 9 }
|
|
|
|
|
|
-- NetFlow Interface Table
|
|
|
|
-- Table containing information about the switching
|
|
-- type in every interface.
|
|
|
|
snNetFlowIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnNetFlowIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of interface entries. The number of entries
|
|
is given by the value of ifNumber."
|
|
::= { snNetFlow 4 }
|
|
|
|
snNetFlowIfEntry OBJECT-TYPE
|
|
SYNTAX SnNetFlowIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry containing the type of switching performed
|
|
on that interface."
|
|
INDEX { snNetFlowIfIndex }
|
|
::= { snNetFlowIfTable 1 }
|
|
|
|
SnNetFlowIfEntry ::= SEQUENCE {
|
|
snNetFlowIfIndex
|
|
InterfaceIndex,
|
|
snNetFlowIfFlowSwitching
|
|
INTEGER
|
|
}
|
|
|
|
snNetFlowIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value, greater than zero, for each
|
|
interface. It is recommended that values are assigned
|
|
contiguously starting from 1. The value for each
|
|
interface sub-layer must remain constant at least from
|
|
one re-initialization of the entity's network
|
|
management system to the next re-initialization."
|
|
::= { snNetFlowIfEntry 1 }
|
|
|
|
snNetFlowIfFlowSwitching OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled (0), enabled (1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To enable/disable flow switching in a particular
|
|
interface:
|
|
disable (0) - no flow switching
|
|
enable (1) - flow switching"
|
|
::= { snNetFlowIfEntry 2 }
|
|
|
|
-- sFlow Collector Table.
|
|
|
|
snSFlowGlb OBJECT IDENTIFIER ::= { snSFlow 1 }
|
|
|
|
snSflowCollectorTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SnSflowCollectorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of all but first sFlow collectors. The first collector can be configured
|
|
using sFlowTable in RFC 3176. The RFC cannot be used to configure more
|
|
than one sFlow collectors. This table has been created to fill this gap."
|
|
::= { snSFlow 2 }
|
|
|
|
snSflowCollectorEntry OBJECT-TYPE
|
|
SYNTAX SnSflowCollectorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the sFlow collector table."
|
|
INDEX { snSflowCollectorIndex }
|
|
::= { snSflowCollectorTable 1 }
|
|
|
|
SnSflowCollectorEntry ::= SEQUENCE {
|
|
snSflowCollectorIndex
|
|
Integer32,
|
|
snSflowCollectorIP
|
|
IpAddress,
|
|
snSflowCollectorUDPPort
|
|
Integer32,
|
|
snSflowCollectorRowStatus
|
|
INTEGER
|
|
}
|
|
|
|
snSflowCollectorIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index to the sFlow collector table."
|
|
::= { snSflowCollectorEntry 1 }
|
|
|
|
snSflowCollectorIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sFlow collector ip address."
|
|
::= { snSflowCollectorEntry 2 }
|
|
|
|
snSflowCollectorUDPPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sFlow collector UDP port number."
|
|
::= { snSflowCollectorEntry 3 }
|
|
|
|
snSflowCollectorRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noSuch(0),
|
|
other(1),
|
|
valid(2),
|
|
delete(3),
|
|
create(4),
|
|
modify(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To create, update or delete a SFlow collector table entry.
|
|
If the row exists, then a SET with
|
|
value of create(4) returns error
|
|
'badValue'. Deleted rows go away
|
|
immediately. The following values
|
|
can be returned on reads:
|
|
noSuch(0)...no such row
|
|
other(1)....some other case
|
|
valid(2)....the row exists and is valid"
|
|
::= { snSflowCollectorEntry 4 }
|
|
|
|
|
|
snFdpMIBObjects OBJECT IDENTIFIER ::= { snFDP 1 }
|
|
|
|
snFdpInterface OBJECT IDENTIFIER ::= { snFdpMIBObjects 1 }
|
|
snFdpCache OBJECT IDENTIFIER ::= { snFdpMIBObjects 2 }
|
|
snFdpGlobal OBJECT IDENTIFIER ::= { snFdpMIBObjects 3 }
|
|
snFdpCachedAddr OBJECT IDENTIFIER ::= { snFdpMIBObjects 4 }
|
|
|
|
--
|
|
-- FDP Interface Group
|
|
--
|
|
snFdpInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FdpInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of FDP on the device's interfaces."
|
|
::= { snFdpInterface 1 }
|
|
|
|
snFdpInterfaceEntry OBJECT-TYPE
|
|
SYNTAX FdpInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the snFdpInterfaceTable,
|
|
having the status of FDP on an interface."
|
|
INDEX { snFdpInterfaceIfIndex }
|
|
::= { snFdpInterfaceTable 1 }
|
|
|
|
FdpInterfaceEntry ::= SEQUENCE {
|
|
snFdpInterfaceIfIndex InterfaceIndex,
|
|
snFdpInterfaceFdpEnable INTEGER,
|
|
snFdpInterfaceCdpEnable INTEGER
|
|
}
|
|
|
|
snFdpInterfaceIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ifIndex value of the local interface."
|
|
::= { snFdpInterfaceEntry 1 }
|
|
|
|
snFdpInterfaceFdpEnable OBJECT-TYPE
|
|
SYNTAX INTEGER { false(0), true(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The flag, whether the Foundry Discovery Protocol
|
|
is currently running on this interface. It has no
|
|
effect when FDP is disabled (snFdpGlobalRun = FALSE)."
|
|
DEFVAL { true }
|
|
::= { snFdpInterfaceEntry 2 }
|
|
|
|
snFdpInterfaceCdpEnable OBJECT-TYPE
|
|
SYNTAX INTEGER { false(0), true(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The flag, whether the Cisco Discovery Protocol
|
|
is currently running on this interface. It has no
|
|
effect when CDP is disabled (snCdpGlobalRun = FALSE)."
|
|
DEFVAL { true }
|
|
::= { snFdpInterfaceEntry 3 }
|
|
|
|
--
|
|
-- FDP Cache Table
|
|
--
|
|
|
|
snFdpCacheTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FdpCacheEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table for the cached information obtained
|
|
via receiving FDP/CDP messages."
|
|
::= { snFdpCache 1 }
|
|
|
|
snFdpCacheEntry OBJECT-TYPE
|
|
SYNTAX FdpCacheEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the snFdpCacheTable, having the information
|
|
received via FDP/CDP on one interface from one device.
|
|
Entries appear when a FDP/CDP advertisement is received
|
|
from a neighbor device.
|
|
Entries disappear when FDP/CDP is disabled on the interface, or globally."
|
|
INDEX { snFdpCacheIfIndex, snFdpCacheDeviceIndex }
|
|
::= { snFdpCacheTable 1 }
|
|
|
|
FdpCacheEntry ::= SEQUENCE {
|
|
snFdpCacheIfIndex InterfaceIndex,
|
|
snFdpCacheDeviceIndex Integer32,
|
|
snFdpCacheDeviceId DisplayString,
|
|
snFdpCacheAddressType INTEGER,
|
|
snFdpCacheAddress OCTET STRING,
|
|
snFdpCacheVersion DisplayString,
|
|
snFdpCacheDevicePort DisplayString,
|
|
snFdpCachePlatform DisplayString,
|
|
snFdpCacheCapabilities DisplayString,
|
|
snFdpCacheVendorId INTEGER,
|
|
snFdpCacheIsAggregateVlan INTEGER,
|
|
snFdpCacheTagType Integer32,
|
|
snFdpCachePortVlanMask OCTET STRING,
|
|
snFdpCachePortTagMode INTEGER,
|
|
snFdpCacheDefaultTrafficeVlanIdForDualMode Integer32
|
|
}
|
|
|
|
snFdpCacheIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ifIndex value of the local interface."
|
|
::= { snFdpCacheEntry 1 }
|
|
|
|
snFdpCacheDeviceIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identification of a device, which sent FDP/CDP messages"
|
|
::= { snFdpCacheEntry 2 }
|
|
|
|
snFdpCacheDeviceId OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Device-ID string as reported in the most recent FDP/CDP
|
|
message. The zero-length string indicates no Device-ID
|
|
field (TLV) was reported in the most recent FDP/CDP
|
|
message."
|
|
::= { snFdpCacheEntry 3 }
|
|
|
|
snFdpCacheAddressType OBJECT-TYPE
|
|
SYNTAX INTEGER { ip(1), ipx(2), appletalk(3) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An indication of the type of address contained in the
|
|
corresponding instance of snFdpCacheAddress."
|
|
::= { snFdpCacheEntry 4 }
|
|
|
|
snFdpCacheAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (first) network-layer address of the device
|
|
as reported in the most recent FDP/CDP message
|
|
in the following format:
|
|
IP address: 4 octets, ip(1)
|
|
IPX address: 10 octets, ipx(2)
|
|
First 4-octet as the network number
|
|
Second 6-octet as the host number
|
|
Appletalk address: 3 octets, appletalk(3)
|
|
First 2-octet as the network number
|
|
Second 1-octet as the host number"
|
|
::= { snFdpCacheEntry 5 }
|
|
|
|
snFdpCacheVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Version string as reported in the most recent FDP/CDP message. "
|
|
::= { snFdpCacheEntry 6 }
|
|
|
|
|
|
snFdpCacheDevicePort OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Port-ID string as reported in the most recent FDP/CDP
|
|
message. This will typically be the value of the ifName
|
|
object (e.g., Ethernet0). The zero-length string
|
|
indicates no Port-ID field (TLV) was reported in the
|
|
most recent FDP/CDP message."
|
|
::= { snFdpCacheEntry 7 }
|
|
|
|
snFdpCachePlatform OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Device's Hardware Platform as reported in the most
|
|
recent FDP/CDP message. The zero-length string indicates
|
|
that no Platform field (TLV) was reported in the most
|
|
recent FDP/CDP message."
|
|
::= { snFdpCacheEntry 8 }
|
|
|
|
snFdpCacheCapabilities OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Device's Functional Capabilities as reported in the
|
|
most recent FDP/CDP message. "
|
|
::= { snFdpCacheEntry 9 }
|
|
|
|
snFdpCacheVendorId OBJECT-TYPE
|
|
SYNTAX INTEGER { fdp(1), cdp(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the entry received by either FDP or CDP."
|
|
::= { snFdpCacheEntry 10 }
|
|
|
|
snFdpCacheIsAggregateVlan OBJECT-TYPE
|
|
SYNTAX INTEGER { false(0), true(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Neighbor device is in aggregated-vlan."
|
|
::= { snFdpCacheEntry 11 }
|
|
|
|
snFdpCacheTagType OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Neighbor device tag-type."
|
|
::= { snFdpCacheEntry 12 }
|
|
|
|
snFdpCachePortVlanMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Neighbor device port VLAN masks in 512-byte octet string."
|
|
::= { snFdpCacheEntry 13 }
|
|
|
|
snFdpCachePortTagMode OBJECT-TYPE
|
|
SYNTAX INTEGER { untagged(1), tagged(2), dual(3) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Neighbor device port tag mode"
|
|
::= { snFdpCacheEntry 14 }
|
|
|
|
snFdpCacheDefaultTrafficeVlanIdForDualMode OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Default traffic vlan id for neighbor device dual-mode port"
|
|
::= { snFdpCacheEntry 15 }
|
|
|
|
--
|
|
-- FDP Global Group
|
|
--
|
|
|
|
snFdpGlobalRun OBJECT-TYPE
|
|
SYNTAX INTEGER { false(0), true(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The flag, whether the Foundry Discovery Protocol
|
|
is currently running. FDP entries in snFdpCacheTable are
|
|
deleted when FDP is disabled."
|
|
DEFVAL { false }
|
|
::= { snFdpGlobal 1 }
|
|
|
|
snFdpGlobalMessageInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (5..900)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interval at which FDP messages are to be generated.
|
|
The default value is 60 seconds."
|
|
DEFVAL { 60 }
|
|
::= { snFdpGlobal 2 }
|
|
|
|
snFdpGlobalHoldTime OBJECT-TYPE
|
|
SYNTAX INTEGER (10..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time for the receiving device holds FDP message.
|
|
The default value is 180 seconds."
|
|
DEFVAL { 180 }
|
|
::= { snFdpGlobal 3 }
|
|
|
|
snFdpGlobalCdpRun OBJECT-TYPE
|
|
SYNTAX INTEGER { false(0), true(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An indication of whether the Cisco Discovery Protocol
|
|
is currently running. CDP entries in snFdpCacheTable are
|
|
deleted when CDP is disabled."
|
|
DEFVAL { false }
|
|
::= { snFdpGlobal 4 }
|
|
|
|
--
|
|
-- FDP Cached Address Entry Table
|
|
--
|
|
snFdpCachedAddressTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FdpCachedAddressEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Cached address table from receiving FDP/CDP messages."
|
|
::= { snFdpCachedAddr 1 }
|
|
|
|
snFdpCachedAddressEntry OBJECT-TYPE
|
|
SYNTAX FdpCachedAddressEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the snFdpCacheAddressTable,
|
|
containing one cached address from FDP/CDP messages."
|
|
INDEX { snFdpCachedAddrIfIndex, snFdpCachedAddrDeviceIndex, snFdpCachedAddrDeviceAddrEntryIndex }
|
|
::= { snFdpCachedAddressTable 1 }
|
|
|
|
FdpCachedAddressEntry ::= SEQUENCE {
|
|
snFdpCachedAddrIfIndex InterfaceIndex,
|
|
snFdpCachedAddrDeviceIndex Integer32,
|
|
snFdpCachedAddrDeviceAddrEntryIndex Integer32,
|
|
snFdpCachedAddrType INTEGER,
|
|
snFdpCachedAddrValue OCTET STRING
|
|
}
|
|
|
|
snFdpCachedAddrIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex value of the local interface."
|
|
::= { snFdpCachedAddressEntry 1 }
|
|
|
|
snFdpCachedAddrDeviceIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique vlaue for each device from which FDP/CDP messages
|
|
are being received."
|
|
::= { snFdpCachedAddressEntry 2 }
|
|
|
|
snFdpCachedAddrDeviceAddrEntryIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique vlaue for address entry in device from which FDP/CDP messages
|
|
are being received."
|
|
::= { snFdpCachedAddressEntry 3 }
|
|
|
|
snFdpCachedAddrType OBJECT-TYPE
|
|
SYNTAX INTEGER { ip(1), ipx(2), appletalk(3) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An indication of the type of address contained in the
|
|
corresponding instance of snFdpCacheAddrValue."
|
|
::= { snFdpCachedAddressEntry 4 }
|
|
|
|
snFdpCachedAddrValue OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The network-layer address of the device
|
|
SNMP-agent as reported in the most recent FDP/CDP message
|
|
in the following format:
|
|
IP address: 4 octets, ip(1)
|
|
IPX address: 10 octets, ipx(2)
|
|
First 4-octet as the network number
|
|
Second 6-octet as the host number
|
|
Appletalk address: 3 octets, appletalk(3)
|
|
First 2-octet as the network number
|
|
Second 1-octet as the host number"
|
|
::= { snFdpCachedAddressEntry 5 }
|
|
|
|
|
|
snMacSecurity OBJECT IDENTIFIER ::= { snMac 1 }
|
|
snPortMacSecurity OBJECT IDENTIFIER ::= { snMacSecurity 1 }
|
|
snPortMacGlobalSecurity OBJECT IDENTIFIER ::= { snMacSecurity 2 }
|
|
|
|
--
|
|
-- Port MAC Security Table
|
|
--
|
|
|
|
snPortMacSecurityTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortMacSecurityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of port MAC security on the device's interfaces."
|
|
::= { snPortMacSecurity 1 }
|
|
|
|
snPortMacSecurityEntry OBJECT-TYPE
|
|
SYNTAX PortMacSecurityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the snPortMacSecurityTable"
|
|
INDEX { snPortMacSecurityIfIndex,
|
|
snPortMacSecurityResource,
|
|
snPortMacSecurityQueryIndex
|
|
}
|
|
::= { snPortMacSecurityTable 1 }
|
|
|
|
PortMacSecurityEntry ::= SEQUENCE {
|
|
snPortMacSecurityIfIndex Unsigned32,
|
|
snPortMacSecurityResource INTEGER,
|
|
snPortMacSecurityQueryIndex Unsigned32,
|
|
snPortMacSecurityMAC MacAddress,
|
|
snPortMacSecurityAgeLeft Unsigned32,
|
|
snPortMacSecurityShutdownStatus INTEGER,
|
|
snPortMacSecurityShutdownTimeLeft Unsigned32,
|
|
snPortMacSecurityVlanId Unsigned32
|
|
}
|
|
|
|
snPortMacSecurityIfIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ifIndex value of the local Ethernet interface on
|
|
which MAC security is configured."
|
|
::= {snPortMacSecurityEntry 1}
|
|
|
|
snPortMacSecurityResource OBJECT-TYPE
|
|
SYNTAX INTEGER { local(1), shared(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address was secured using local or shared resources."
|
|
::= {snPortMacSecurityEntry 2}
|
|
|
|
snPortMacSecurityQueryIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry index within the given resource of local Ethernet interface on
|
|
which MAC security is configured."
|
|
::= {snPortMacSecurityEntry 3}
|
|
|
|
snPortMacSecurityMAC OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The secure MAC address for this interface."
|
|
::= {snPortMacSecurityEntry 4}
|
|
|
|
snPortMacSecurityAgeLeft OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of minutes the MAC address will remain secure
|
|
before being aged out. 0 means no aging."
|
|
::= {snPortMacSecurityEntry 5}
|
|
|
|
snPortMacSecurityShutdownStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { up(1), down(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interface up/down status."
|
|
::= {snPortMacSecurityEntry 6}
|
|
|
|
snPortMacSecurityShutdownTimeLeft OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If snPortMacSecurityShutdownStatus is up(1), this value will be 0.
|
|
If snPortMacSecurityShutdownStatus is down(2), this gives
|
|
the number of seconds before this interface is enabled again.
|
|
In the later case, 0 means interface is permanently down."
|
|
::= {snPortMacSecurityEntry 7}
|
|
|
|
snPortMacSecurityVlanId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vlan membership of this interface."
|
|
::= {snPortMacSecurityEntry 8}
|
|
|
|
|
|
|
|
--
|
|
-- Port MAC Security Module Statistics Table
|
|
--
|
|
|
|
snPortMacSecurityModuleStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortMacSecurityModuleStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port MAC security statistics on each module."
|
|
::= { snPortMacSecurity 2 }
|
|
|
|
snPortMacSecurityModuleStatEntry OBJECT-TYPE
|
|
SYNTAX PortMacSecurityModuleStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the snPortMacSecurityModuleStatTable"
|
|
INDEX { snPortMacSecurityModuleStatSlotNum }
|
|
::= { snPortMacSecurityModuleStatTable 1 }
|
|
|
|
PortMacSecurityModuleStatEntry ::= SEQUENCE {
|
|
snPortMacSecurityModuleStatSlotNum Integer32,
|
|
snPortMacSecurityModuleStatTotalSecurityPorts Unsigned32,
|
|
snPortMacSecurityModuleStatTotalMACs Unsigned32,
|
|
snPortMacSecurityModuleStatViolationCounts Unsigned32,
|
|
snPortMacSecurityModuleStatTotalShutdownPorts Unsigned32
|
|
}
|
|
|
|
snPortMacSecurityModuleStatSlotNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The slot number of the port security device module."
|
|
::= {snPortMacSecurityModuleStatEntry 1}
|
|
|
|
snPortMacSecurityModuleStatTotalSecurityPorts OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The totol number of Ethernet interfaces on which MAC security is configured in this module."
|
|
::= {snPortMacSecurityModuleStatEntry 2}
|
|
|
|
snPortMacSecurityModuleStatTotalMACs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The totol number of port MAC security MAC addresses are learned or configured in this module."
|
|
::= {snPortMacSecurityModuleStatEntry 3}
|
|
|
|
snPortMacSecurityModuleStatViolationCounts OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The totol number of counts of violation are collected in this module."
|
|
::= {snPortMacSecurityModuleStatEntry 4}
|
|
|
|
snPortMacSecurityModuleStatTotalShutdownPorts OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The totol number of Ethernet interfaces are shutted down due to security violation in this module."
|
|
::= {snPortMacSecurityModuleStatEntry 5}
|
|
|
|
--
|
|
-- Port MAC Security Interface Table
|
|
--
|
|
|
|
snPortMacSecurityIntfContentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortMacSecurityIntfContentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port MAC security statistics on each Ethernet Interface."
|
|
::= { snPortMacSecurity 3 }
|
|
|
|
snPortMacSecurityIntfContentEntry OBJECT-TYPE
|
|
SYNTAX PortMacSecurityIntfContentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the snPortMacSecurityIntfContentTable"
|
|
INDEX { snPortMacSecurityIntfContentIfIndex }
|
|
::= { snPortMacSecurityIntfContentTable 1 }
|
|
|
|
PortMacSecurityIntfContentEntry ::= SEQUENCE {
|
|
snPortMacSecurityIntfContentIfIndex InterfaceIndex,
|
|
snPortMacSecurityIntfContentSecurity INTEGER,
|
|
snPortMacSecurityIntfContentViolationType INTEGER,
|
|
snPortMacSecurityIntfContentShutdownTime Unsigned32,
|
|
snPortMacSecurityIntfContentShutdownTimeLeft Unsigned32,
|
|
snPortMacSecurityIntfContentAgeOutTime Unsigned32,
|
|
snPortMacSecurityIntfContentMaxLockedMacAllowed Unsigned32,
|
|
snPortMacSecurityIntfContentTotalMACs Unsigned32,
|
|
snPortMacSecurityIntfContentViolationCounts Unsigned32
|
|
}
|
|
|
|
snPortMacSecurityIntfContentIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"In order to identify a particular interface, this
|
|
object shall identify the instance of the ifIndex
|
|
object, defined in RFC 2863."
|
|
::= { snPortMacSecurityIntfContentEntry 1 }
|
|
|
|
snPortMacSecurityIntfContentSecurity OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port security for this interface can be either disabled or enabled."
|
|
::= {snPortMacSecurityIntfContentEntry 2}
|
|
|
|
snPortMacSecurityIntfContentViolationType OBJECT-TYPE
|
|
SYNTAX INTEGER { shutdown(0), restrict(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port security violation type for this interface is shutdown or restrict."
|
|
::= {snPortMacSecurityIntfContentEntry 3}
|
|
|
|
snPortMacSecurityIntfContentShutdownTime OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..1440)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If snPortMacSecurityIntfContentViolationType is shutdown(1),
|
|
this value gives the number of seconds this interface is shut down when violation occurs.
|
|
In the shutdown(1) case, 0 means interface is permanently down.
|
|
If snPortMacSecurityIntfContentViolationType is restrict(2), this value will be always 0."
|
|
::= {snPortMacSecurityIntfContentEntry 4}
|
|
|
|
snPortMacSecurityIntfContentShutdownTimeLeft OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If snPortMacSecurityIntfContentViolationType is shutdown(1),
|
|
whether this interface has been shut down due to a security violation
|
|
and the value gives the number of seconds before this interface is enabled again.
|
|
If snPortMacSecurityIntfContentViolationType is restrict(2), this value will be always 0."
|
|
::= {snPortMacSecurityIntfContentEntry 5}
|
|
|
|
snPortMacSecurityIntfContentAgeOutTime OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..1440)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of time, in minutes, MAC addresses learned on this interface will remain secure.
|
|
It allows configurable values 0-1440. 0 means no aging permanently."
|
|
::= {snPortMacSecurityIntfContentEntry 6}
|
|
|
|
snPortMacSecurityIntfContentMaxLockedMacAllowed OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum number of security MAC addresses can be locked to this interface."
|
|
::= {snPortMacSecurityIntfContentEntry 7}
|
|
|
|
snPortMacSecurityIntfContentTotalMACs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The totol number of port MAC security MAC addresses are locked in this interface."
|
|
::= {snPortMacSecurityIntfContentEntry 8}
|
|
|
|
snPortMacSecurityIntfContentViolationCounts OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The totol number of counts of violation are collected in this interface."
|
|
::= {snPortMacSecurityIntfContentEntry 9}
|
|
|
|
--
|
|
-- Port MAC Security Interface MAC Table
|
|
--
|
|
|
|
snPortMacSecurityIntfMacTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortMacSecurityIntfMacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of port MAC security on the device's interfaces."
|
|
::= { snPortMacSecurity 4 }
|
|
|
|
snPortMacSecurityIntfMacEntry OBJECT-TYPE
|
|
SYNTAX PortMacSecurityIntfMacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the snPortMacSecurityIntfMacTable"
|
|
INDEX { snPortMacSecurityIntfMacIfIndex,
|
|
snPortMacSecurityIntfMacAddress
|
|
}
|
|
::= { snPortMacSecurityIntfMacTable 1 }
|
|
|
|
PortMacSecurityIntfMacEntry ::= SEQUENCE {
|
|
snPortMacSecurityIntfMacIfIndex Integer32,
|
|
snPortMacSecurityIntfMacAddress MacAddress,
|
|
snPortMacSecurityIntfMacVlanId Unsigned32,
|
|
snPortMacSecurityIntfMacRowStatus INTEGER
|
|
}
|
|
|
|
snPortMacSecurityIntfMacIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ifIndex value of the local Ethernet interface on
|
|
which MAC security is configured."
|
|
::= {snPortMacSecurityIntfMacEntry 1}
|
|
|
|
snPortMacSecurityIntfMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The secure MAC address for this local Ethernet interface on
|
|
which the secure MAC Address is configured and/or learned.
|
|
The maximum number of the secure MAC Addresses is restricted
|
|
by the snPortMacSecurityIntfContentMaxLockedMacAllowed."
|
|
::= {snPortMacSecurityIntfMacEntry 2}
|
|
|
|
snPortMacSecurityIntfMacVlanId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vlan membership of this interface, zero means don't care."
|
|
::= {snPortMacSecurityIntfMacEntry 3}
|
|
|
|
snPortMacSecurityIntfMacRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
valid(2),
|
|
delete(3),
|
|
create(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create and
|
|
delete row in the table and control
|
|
if they are used. The values
|
|
that can be written are:
|
|
delete(3)...deletes the row
|
|
create(4)...creates a new row
|
|
|
|
If the row exists, then a SET with
|
|
value of create(4) returns error
|
|
'badValue'. Deleted rows go away
|
|
immediately. The following values
|
|
can be returned on reads:
|
|
noSuch(0)...no such row
|
|
other(1)....some other case
|
|
valid(2)....the row exists and is valid"
|
|
::= {snPortMacSecurityIntfMacEntry 4}
|
|
|
|
|
|
--
|
|
-- Port MAC Security Autosave MAC Table
|
|
--
|
|
|
|
snPortMacSecurityAutosaveMacTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortMacSecurityAutosaveMacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Autosave MAC addresses of port MAC security on the device's interfaces."
|
|
::= { snPortMacSecurity 5 }
|
|
|
|
snPortMacSecurityAutosaveMacEntry OBJECT-TYPE
|
|
SYNTAX PortMacSecurityAutosaveMacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the snPortMacSecurityAutosaveMacTable"
|
|
INDEX { snPortMacSecurityAutosaveMacIfIndex,
|
|
snPortMacSecurityAutosaveMacResource,
|
|
snPortMacSecurityAutosaveMacQueryIndex
|
|
}
|
|
::= { snPortMacSecurityAutosaveMacTable 1 }
|
|
|
|
PortMacSecurityAutosaveMacEntry ::= SEQUENCE {
|
|
snPortMacSecurityAutosaveMacIfIndex Integer32,
|
|
snPortMacSecurityAutosaveMacResource INTEGER,
|
|
snPortMacSecurityAutosaveMacQueryIndex Unsigned32,
|
|
snPortMacSecurityAutosaveMacAddress MacAddress
|
|
}
|
|
|
|
snPortMacSecurityAutosaveMacIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ifIndex value of the local Ethernet interface on
|
|
which MAC security is configured."
|
|
::= {snPortMacSecurityAutosaveMacEntry 1}
|
|
|
|
snPortMacSecurityAutosaveMacResource OBJECT-TYPE
|
|
SYNTAX INTEGER { local(1), shared(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address was autosaved using local or shared resources."
|
|
::= {snPortMacSecurityAutosaveMacEntry 2}
|
|
|
|
snPortMacSecurityAutosaveMacQueryIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry index within the given resource of local Ethernet interface on
|
|
which MAC security is autosaved."
|
|
::= {snPortMacSecurityAutosaveMacEntry 3}
|
|
|
|
snPortMacSecurityAutosaveMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The secure MAC address for this local Ethernet interface on
|
|
which the secure MAC Address is autosaved."
|
|
::= {snPortMacSecurityAutosaveMacEntry 4}
|
|
|
|
|
|
|
|
-- Port MAC Global Security MIB Group
|
|
|
|
snPortMacGlobalSecurityFeature OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port security for this device can be either disabled or enabled."
|
|
::= { snPortMacGlobalSecurity 1 }
|
|
|
|
snPortMacGlobalSecurityAgeOutTime OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..1440)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of time, in minutes, MAC addresses learned on this device will remain secure.
|
|
It allows configurable values in the range of 0-1440. 0 means no aging permanently."
|
|
::= { snPortMacGlobalSecurity 2 }
|
|
|
|
snPortMacGlobalSecurityAutosave OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port security autosave value for this device. It allows
|
|
configurable values 0 and also in the range of 15-1440. The value 0 means no autosave."
|
|
::= { snPortMacGlobalSecurity 3 }
|
|
|
|
|
|
--
|
|
-- Port Monitor Table
|
|
--
|
|
|
|
snPortMonitorTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortMonitorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of port monitoring on the device's interfaces."
|
|
::= { snPortMonitor 1 }
|
|
|
|
snPortMonitorEntry OBJECT-TYPE
|
|
SYNTAX PortMonitorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the snPortMonitorTable"
|
|
INDEX { snPortMonitorIfIndex }
|
|
::= { snPortMonitorTable 1 }
|
|
|
|
PortMonitorEntry ::= SEQUENCE {
|
|
snPortMonitorIfIndex InterfaceIndex,
|
|
snPortMonitorMirrorList DisplayString
|
|
}
|
|
|
|
snPortMonitorIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ifIndex value of the local interface on which
|
|
monitoring is configuerd."
|
|
::= { snPortMonitorEntry 1 }
|
|
|
|
snPortMonitorMirrorList OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Lists the monitoring configuration of this port.
|
|
The value is a space delimited sequence of ifIndex of mirror port
|
|
and monitor mode. The values for mode can be -
|
|
0 - off, 1 - input, 2 - output, 3 - both
|
|
Eg. '65 2 66 1' means send the output traffic to port 2/1 and
|
|
input traffic to port 2/2.
|
|
To turn off a mirror use monitor mode of 0 (off) in the list."
|
|
::= { snPortMonitorEntry 2 }
|
|
|
|
END
|